Linux 3.1-git3. Happy Halloween.

Makefile

@@ -47,6 +47,7 @@ debug:
 	@perl -pi -e 's/# CONFIG_FAIL_PAGE_ALLOC is not set/CONFIG_FAIL_PAGE_ALLOC=y/' config-nodebug
 	@perl -pi -e 's/# CONFIG_FAIL_IO_TIMEOUT is not set/CONFIG_FAIL_IO_TIMEOUT=y/' config-nodebug
 	@perl -pi -e 's/# CONFIG_FAIL_MAKE_REQUEST is not set/CONFIG_FAIL_MAKE_REQUEST=y/' config-nodebug
+	@perl -pi -e 's/# CONFIG_FAIL_MMC_REQUEST is not set/CONFIG_FAIL_MMC_REQUEST=y/' config-nodebug
 	@perl -pi -e 's/# CONFIG_FAULT_INJECTION_DEBUG_FS is not set/CONFIG_FAULT_INJECTION_DEBUG_FS=y/' config-nodebug
 	@perl -pi -e 's/# CONFIG_FAULT_INJECTION_STACKTRACE_FILTER is not set/CONFIG_FAULT_INJECTION_STACKTRACE_FILTER=y/' config-nodebug
 	@perl -pi -e 's/# CONFIG_DEBUG_SG is not set/CONFIG_DEBUG_SG=y/' config-nodebug

Makefile.release

@@ -22,6 +22,7 @@ config-release:
 	@perl -pi -e 's/CONFIG_FAIL_PAGE_ALLOC=y/# CONFIG_FAIL_PAGE_ALLOC is not set/' config-nodebug
 	@perl -pi -e 's/CONFIG_FAIL_IO_TIMEOUT=y/# CONFIG_FAIL_IO_TIMEOUT is not set/' config-nodebug
 	@perl -pi -e 's/CONFIG_FAIL_MAKE_REQUEST=y/# CONFIG_FAIL_MAKE_REQUEST is not set/' config-nodebug
+	@perl -pi -e 's/CONFIG_FAIL_MMC_REQUEST=y/# CONFIG_FAIL_MMC_REQUEST is not set/' config-nodebug
 	@perl -pi -e 's/CONFIG_FAULT_INJECTION_DEBUG_FS=y/# CONFIG_FAULT_INJECTION_DEBUG_FS is not set/' config-nodebug
 	@perl -pi -e 's/CONFIG_FAULT_INJECTION_STACKTRACE_FILTER=y/# CONFIG_FAULT_INJECTION_STACKTRACE_FILTER is not set/' config-nodebug
 	@perl -pi -e 's/CONFIG_DEBUG_SG=y/# CONFIG_DEBUG_SG is not set/' config-nodebug

config-arm-generic

@@ -44,6 +44,8 @@ CONFIG_OABI_COMPAT=y
 
 # CONFIG_UACCESS_WITH_MEMCPY is not set
 
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_ARM_ATAG_DTB_COMPAT=y
 CONFIG_CMDLINE="console=ttyAM0,115200 root=/dev/sda1 rootdelay=20"
 
 CONFIG_NO_HZ=y
@@ -172,3 +174,4 @@ CONFIG_FTGMAC100=m
 # CONFIG_DRM_RADEON is not set
 # CONFIG_ATM_HE is not set
 # CONFIG_SCSI_ACARD is not set
+# CONFIG_ARM_KPROBES_TEST is not set

config-arm-omap-generic

@@ -51,6 +51,7 @@ CONFIG_OMAP_32K_TIMER_HZ=128
 CONFIG_OMAP_DM_TIMER=y
 # CONFIG_OMAP_PM_NONE is not set
 CONFIG_OMAP_PM_NOOP=y
+# CONFIG_OMAP_IOMMU is not set
 
 #
 # TI OMAP2/3/4 Specific Features
@@ -741,6 +742,8 @@ CONFIG_PANEL_GENERIC_DPI=y
 CONFIG_PANEL_SHARP_LS037V7DW01=y
 CONFIG_PANEL_NEC_NL8048HL11_01B=y
 CONFIG_PANEL_TPO_TD043MTEA1=y
+# CONFIG_PANEL_DVI is not set
+# CONFIG_PANEL_PICODLP is not set
 # CONFIG_LCD_L4F00242T03 is not set
 # CONFIG_LCD_LMS283GF05 is not set
 # CONFIG_LCD_LTV350QV is not set

config-debug

@@ -24,6 +24,7 @@ CONFIG_FAIL_MAKE_REQUEST=y
 CONFIG_FAULT_INJECTION_DEBUG_FS=y
 CONFIG_FAULT_INJECTION_STACKTRACE_FILTER=y
 CONFIG_FAIL_IO_TIMEOUT=y
+CONFIG_FAIL_MMC_REQUEST=y
 
 CONFIG_SLUB_DEBUG_ON=y
 

config-generic

@@ -89,6 +89,8 @@ CONFIG_PCI=y
 # CONFIG_PCI_DEBUG is not set
 CONFIG_PCI_STUB=y
 CONFIG_PCI_IOV=y
+CONFIG_PCI_PRI=y
+CONFIG_PCI_PASID=y
 CONFIG_HT_IRQ=y
 CONFIG_PCI_MSI=y
 CONFIG_PCIEPORTBUS=y
@@ -528,6 +530,8 @@ CONFIG_SCSI_MPT2SAS=m
 CONFIG_SCSI_MPT2SAS_MAX_SGE=128
 CONFIG_SCSI_MPT2SAS_LOGGING=y
 
+CONFIG_SCSI_MVUMI=m
+
 CONFIG_SCSI_OSD_INITIATOR=m
 CONFIG_SCSI_OSD_ULD=m
 CONFIG_SCSI_OSD_DPRINT_SENSE=1
@@ -2917,6 +2921,7 @@ CONFIG_FB_SAVAGE_ACCEL=y
 CONFIG_FB_SIS_300=y
 CONFIG_FB_SIS_315=y
 CONFIG_FB_SM501=m
+CONFIG_FB_SMSCUFX=m
 CONFIG_FB_TILEBLITTING=y
 CONFIG_FB_TRIDENT=m
 # CONFIG_FB_UVESA is not set
@@ -3604,6 +3609,7 @@ CONFIG_LOGFS=m
 CONFIG_CEPH_FS=m
 CONFIG_BLK_DEV_RBD=m
 CONFIG_CEPH_LIB=m
+# CONFIG_CEPH_LIB_USE_DNS_RESOLVER is not set
 
 CONFIG_FSCACHE=m
 CONFIG_FSCACHE_STATS=y

config-nodebug

@@ -24,6 +24,7 @@ CONFIG_FAIL_MAKE_REQUEST=y
 CONFIG_FAULT_INJECTION_DEBUG_FS=y
 CONFIG_FAULT_INJECTION_STACKTRACE_FILTER=y
 CONFIG_FAIL_IO_TIMEOUT=y
+CONFIG_FAIL_MMC_REQUEST=y
 
 CONFIG_SLUB_DEBUG_ON=y
 

config-sparc64-generic

@@ -43,6 +43,7 @@ CONFIG_I2C_ALI1535=m
 # CONFIG_VGASTATE is not set
 # CONFIG_FB_DDC is not set
 # CONFIG_FB_BW2 is not set
+# CONFIG_FB_GRVGA is not set
 CONFIG_FB_CG3=y
 CONFIG_FB_CG6=y
 # CONFIG_FB_RIVA is not set

kernel.spec

@@ -84,7 +84,7 @@ Summary: The Linux kernel
 # The rc snapshot level
 %define rcrev 0
 # The git snapshot level
-%define gitrev 2
+%define gitrev 3
 # Set rpm version accordingly
 %define rpmversion 3.%{upstream_sublevel}.0
 %endif
@@ -677,7 +677,6 @@ Patch2905: media-dib0700-correct-error-message.patch
 # patches headed upstream
 Patch12016: disable-i8042-check-on-apple-mac.patch
 
-Patch12021: udlfb-bind-framebuffer-to-interface.patch
 Patch12022: x86-efi-Calling-__pa-with-an-ioremap-address-is-invalid.patch
 
 Patch12024: epoll-fix-spurious-lockdep-warnings.patch
@@ -702,9 +701,6 @@ Patch20000: utrace.patch
 Patch21000: arm-omap-dt-compat.patch
 Patch21001: arm-smsc-support-reading-mac-address-from-device-tree.patch
 
-#rhbz #722509
-Patch21002: mmc-Always-check-for-lower-base-frequency-quirk-for-.patch
-
 #rhbz #735946
 Patch21020: 0001-mm-vmscan-Limit-direct-reclaim-for-higher-order-allo.patch
 Patch21021: 0002-mm-Abort-reclaim-compaction-if-compaction-can-procee.patch
@@ -1278,7 +1274,6 @@ ApplyOptionalPatch linux-2.6-v4l-dvb-experimental.patch
 # Patches headed upstream
 ApplyPatch disable-i8042-check-on-apple-mac.patch
 
-ApplyPatch udlfb-bind-framebuffer-to-interface.patch
 ApplyPatch epoll-fix-spurious-lockdep-warnings.patch
 ApplyPatch epoll-limit-paths.patch
 ApplyPatch block-stray-block-put-after-teardown.patch
@@ -1299,9 +1294,6 @@ ApplyPatch hvcs_pi_buf_alloc.patch
 
 ApplyPatch powerpc-Fix-deadlock-in-icswx-code.patch
 
-#rhbz #722509
-ApplyPatch mmc-Always-check-for-lower-base-frequency-quirk-for-.patch
-
 ApplyPatch media-DiBcom-protect-the-I2C-bufer-access.patch
 ApplyPatch media-dib0700-protect-the-dib0700-buffer-access.patch
 ApplyPatch media-dib0700-correct-error-message.patch
@@ -1997,6 +1989,9 @@ fi
 #                 ||----w |
 #                 ||     ||
 %changelog
+* Mon Oct 31 2011 Josh Boyer <jwboyer@redhat.com>
+- Linux 3.1-git3.  Happy Halloween.
+
 * Fri Oct 28 2011 Josh Boyer <jwboyer@redhat.com>
 - Linux 3.1-git2
 

mmc-Always-check-for-lower-base-frequency-quirk-for-.patch

@@ -1,73 +0,0 @@
-From 65ff02dff67bf26a9c27d9aa11a30eaf3d28469e Mon Sep 17 00:00:00 2001
-From: Josh Boyer <jwboyer@redhat.com>
-Date: Wed, 5 Oct 2011 11:29:57 -0400
-Subject: [PATCH] mmc: Always check for lower base frequency quirk for Ricoh
- 1180:e823
-
-Commit 15bed0f2f added a quirk for the e823 Ricoh card reader to lower the
-base frequency.  However, the quirk first checks to see if the proprietary
-MMC controller is disabled, and returns if so.  On some devices, such as the
-Lenovo X220, the MMC controller is already disabled by firmware it seems,
-but the frequency change is still needed so sdhci-pci can talk to the cards.
-Since the MMC controller is disabled, the frequency fixup was never being run
-on these machines.
-
-This moves the e823 check above the MMC controller check so that it always
-gets run.
-
-This fixes https://bugzilla.redhat.com/show_bug.cgi?id=722509
-
-Signed-off-by: Josh Boyer <jwboyer@redhat.com>
----
- drivers/pci/quirks.c |   28 ++++++++++++++--------------
- 1 files changed, 14 insertions(+), 14 deletions(-)
-
-diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
-index 1196f61..cec4629 100644
---- a/drivers/pci/quirks.c
-+++ b/drivers/pci/quirks.c
-@@ -2745,20 +2745,6 @@ static void ricoh_mmc_fixup_r5c832(struct pci_dev *dev)
- 	/* disable must be done via function #0 */
- 	if (PCI_FUNC(dev->devfn))
- 		return;
--
--	pci_read_config_byte(dev, 0xCB, &disable);
--
--	if (disable & 0x02)
--		return;
--
--	pci_read_config_byte(dev, 0xCA, &write_enable);
--	pci_write_config_byte(dev, 0xCA, 0x57);
--	pci_write_config_byte(dev, 0xCB, disable | 0x02);
--	pci_write_config_byte(dev, 0xCA, write_enable);
--
--	dev_notice(&dev->dev, "proprietary Ricoh MMC controller disabled (via firewire function)\n");
--	dev_notice(&dev->dev, "MMC cards are now supported by standard SDHCI controller\n");
--
- 	/*
- 	 * RICOH 0xe823 SD/MMC card reader fails to recognize
- 	 * certain types of SD/MMC cards. Lowering the SD base
-@@ -2781,6 +2767,20 @@ static void ricoh_mmc_fixup_r5c832(struct pci_dev *dev)
- 
- 		dev_notice(&dev->dev, "MMC controller base frequency changed to 50Mhz.\n");
- 	}
-+
-+	pci_read_config_byte(dev, 0xCB, &disable);
-+
-+	if (disable & 0x02)
-+		return;
-+
-+	pci_read_config_byte(dev, 0xCA, &write_enable);
-+	pci_write_config_byte(dev, 0xCA, 0x57);
-+	pci_write_config_byte(dev, 0xCB, disable | 0x02);
-+	pci_write_config_byte(dev, 0xCA, write_enable);
-+
-+	dev_notice(&dev->dev, "proprietary Ricoh MMC controller disabled (via firewire function)\n");
-+	dev_notice(&dev->dev, "MMC cards are now supported by standard SDHCI controller\n");
-+
- }
- DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832, ricoh_mmc_fixup_r5c832);
- DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832, ricoh_mmc_fixup_r5c832);
--- 
-1.7.6.4
-

sources

@@ -1,2 +1,2 @@
 8d43453f8159b2332ad410b19d86a931  linux-3.1.tar.bz2
-f1c7a6ed2090ffd76affc7b1f0612317  patch-3.1-git2.bz2
+f6754489c6fb6de511c3fcd2b2fa4474  patch-3.1-git3.bz2

udlfb-bind-framebuffer-to-interface.patch

@@ -1,33 +0,0 @@
-From c91a793f66d5b06292aa431ae3a36c8aca991fa3 Mon Sep 17 00:00:00 2001
-From: Kay Sievers <kay.sievers@vrfy.org>
-Date: Tue, 5 Jul 2011 17:04:11 -0700
-Subject: [PATCH] drivers/video/udlfb bind framebuffer to interface.
-
-Udlfb has been binding the framebuffer device to its parent, which
-isn't correct and causes confusion with operations like udev remove.
-
-Coming plug and play multiseat support is dependent on this fix.
-
-Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
-Signed-off-by: Bernie Thompson <bernie@plugable.com>
-Signed-off-by: Paul Mundt <lethal@linux-sh.org>
----
- drivers/video/udlfb.c |    2 +-
- 1 files changed, 1 insertions(+), 1 deletions(-)
-
-diff --git a/drivers/video/udlfb.c b/drivers/video/udlfb.c
-index 816a4fd..c6584c9 100644
---- a/drivers/video/udlfb.c
-+++ b/drivers/video/udlfb.c
-@@ -1549,7 +1549,7 @@ static int dlfb_usb_probe(struct usb_interface *interface,
- 	/* We don't register a new USB class. Our client interface is fbdev */
- 
- 	/* allocates framebuffer driver structure, not framebuffer memory */
--	info = framebuffer_alloc(0, &usbdev->dev);
-+	info = framebuffer_alloc(0, &interface->dev);
- 	if (!info) {
- 		retval = -ENOMEM;
- 		pr_err("framebuffer_alloc failed\n");
--- 
-1.7.4.4
-