openssl/openssl-1.0.0d-padlock64.patch
Tomas Mraz 138493a921 add support for VIA Padlock on 64bit arch from upstream (#617539)
do not return bogus values from load_certs (#652286)
2011-04-28 21:58:56 +02:00

215 lines
5.8 KiB
Diff

diff -up openssl-1.0.0d/engines/e_padlock.c.padlock64 openssl-1.0.0d/engines/e_padlock.c
--- openssl-1.0.0d/engines/e_padlock.c.padlock64 2011-01-30 02:05:38.000000000 +0100
+++ openssl-1.0.0d/engines/e_padlock.c 2011-04-28 21:03:26.000000000 +0200
@@ -101,10 +101,15 @@
compiler choice is limited to GCC and Microsoft C. */
#undef COMPILE_HW_PADLOCK
#if !defined(I386_ONLY) && !defined(OPENSSL_NO_INLINE_ASM)
-# if (defined(__GNUC__) && (defined(__i386__) || defined(__i386))) || \
+# if (defined(__GNUC__) && __GNUC__>=2 && \
+ (defined(__i386__) || defined(__i386) || \
+ defined(__x86_64__) || defined(__x86_64)) \
+ ) || \
(defined(_MSC_VER) && defined(_M_IX86))
# define COMPILE_HW_PADLOCK
+# ifdef OPENSSL_NO_DYNAMIC_ENGINE
static ENGINE *ENGINE_padlock (void);
+# endif
# endif
#endif
@@ -135,7 +140,7 @@ void ENGINE_load_padlock (void)
# endif
#elif defined(__GNUC__)
# ifndef alloca
-# define alloca(s) __builtin_alloca(s)
+# define alloca(s) __builtin_alloca((s))
# endif
#endif
@@ -197,6 +202,7 @@ padlock_bind_helper(ENGINE *e)
return 1;
}
+#ifdef OPENSSL_NO_DYNAMIC_ENGINE
/* Constructor */
static ENGINE *
ENGINE_padlock(void)
@@ -214,6 +220,7 @@ ENGINE_padlock(void)
return eng;
}
+#endif
/* Check availability of the engine */
static int
@@ -298,6 +305,7 @@ static volatile struct padlock_cipher_da
* =======================================================
*/
#if defined(__GNUC__) && __GNUC__>=2
+#if defined(__i386__) || defined(__i386)
/*
* As for excessive "push %ebx"/"pop %ebx" found all over.
* When generating position-independent code GCC won't let
@@ -377,21 +385,6 @@ padlock_available(void)
return padlock_use_ace + padlock_use_rng;
}
-#ifndef OPENSSL_NO_AES
-/* Our own htonl()/ntohl() */
-static inline void
-padlock_bswapl(AES_KEY *ks)
-{
- size_t i = sizeof(ks->rd_key)/sizeof(ks->rd_key[0]);
- unsigned int *key = ks->rd_key;
-
- while (i--) {
- asm volatile ("bswapl %0" : "+r"(*key));
- key++;
- }
-}
-#endif
-
/* Force key reload from memory to the CPU microcode.
Loading EFLAGS from the stack clears EFLAGS[30]
which does the trick. */
@@ -449,12 +442,127 @@ static inline void *name(size_t cnt, \
: "edx", "cc", "memory"); \
return iv; \
}
+#endif
+
+#elif defined(__x86_64__) || defined(__x86_64)
+
+/* Load supported features of the CPU to see if
+ the PadLock is available. */
+static int
+padlock_available(void)
+{
+ char vendor_string[16];
+ unsigned int eax, edx;
+
+ /* Are we running on the Centaur (VIA) CPU? */
+ eax = 0x00000000;
+ vendor_string[12] = 0;
+ asm volatile (
+ "cpuid\n"
+ "movl %%ebx,(%1)\n"
+ "movl %%edx,4(%1)\n"
+ "movl %%ecx,8(%1)\n"
+ : "+a"(eax) : "r"(vendor_string) : "rbx", "rcx", "rdx");
+ if (strcmp(vendor_string, "CentaurHauls") != 0)
+ return 0;
+
+ /* Check for Centaur Extended Feature Flags presence */
+ eax = 0xC0000000;
+ asm volatile ("cpuid"
+ : "+a"(eax) : : "rbx", "rcx", "rdx");
+ if (eax < 0xC0000001)
+ return 0;
+
+ /* Read the Centaur Extended Feature Flags */
+ eax = 0xC0000001;
+ asm volatile ("cpuid"
+ : "+a"(eax), "=d"(edx) : : "rbx", "rcx");
+
+ /* Fill up some flags */
+ padlock_use_ace = ((edx & (0x3<<6)) == (0x3<<6));
+ padlock_use_rng = ((edx & (0x3<<2)) == (0x3<<2));
+
+ return padlock_use_ace + padlock_use_rng;
+}
+/* Force key reload from memory to the CPU microcode.
+ Loading EFLAGS from the stack clears EFLAGS[30]
+ which does the trick. */
+static inline void
+padlock_reload_key(void)
+{
+ asm volatile ("pushfq; popfq");
+}
+
+#ifndef OPENSSL_NO_AES
+/*
+ * This is heuristic key context tracing. At first one
+ * believes that one should use atomic swap instructions,
+ * but it's not actually necessary. Point is that if
+ * padlock_saved_context was changed by another thread
+ * after we've read it and before we compare it with cdata,
+ * our key *shall* be reloaded upon thread context switch
+ * and we are therefore set in either case...
+ */
+static inline void
+padlock_verify_context(struct padlock_cipher_data *cdata)
+{
+ asm volatile (
+ "pushfq\n"
+" btl $30,(%%rsp)\n"
+" jnc 1f\n"
+" cmpq %2,%1\n"
+" je 1f\n"
+" popfq\n"
+" subq $8,%%rsp\n"
+"1: addq $8,%%rsp\n"
+" movq %2,%0"
+ :"+m"(padlock_saved_context)
+ : "r"(padlock_saved_context), "r"(cdata) : "cc");
+}
+
+/* Template for padlock_xcrypt_* modes */
+/* BIG FAT WARNING:
+ * The offsets used with 'leal' instructions
+ * describe items of the 'padlock_cipher_data'
+ * structure.
+ */
+#define PADLOCK_XCRYPT_ASM(name,rep_xcrypt) \
+static inline void *name(size_t cnt, \
+ struct padlock_cipher_data *cdata, \
+ void *out, const void *inp) \
+{ void *iv; \
+ asm volatile ( "leaq 16(%0),%%rdx\n" \
+ " leaq 32(%0),%%rbx\n" \
+ rep_xcrypt "\n" \
+ : "=a"(iv), "=c"(cnt), "=D"(out), "=S"(inp) \
+ : "0"(cdata), "1"(cnt), "2"(out), "3"(inp) \
+ : "rbx", "rdx", "cc", "memory"); \
+ return iv; \
+}
+#endif
+
+#endif /* cpu */
+
+#ifndef OPENSSL_NO_AES
/* Generate all functions with appropriate opcodes */
PADLOCK_XCRYPT_ASM(padlock_xcrypt_ecb, ".byte 0xf3,0x0f,0xa7,0xc8") /* rep xcryptecb */
PADLOCK_XCRYPT_ASM(padlock_xcrypt_cbc, ".byte 0xf3,0x0f,0xa7,0xd0") /* rep xcryptcbc */
PADLOCK_XCRYPT_ASM(padlock_xcrypt_cfb, ".byte 0xf3,0x0f,0xa7,0xe0") /* rep xcryptcfb */
PADLOCK_XCRYPT_ASM(padlock_xcrypt_ofb, ".byte 0xf3,0x0f,0xa7,0xe8") /* rep xcryptofb */
+
+/* Our own htonl()/ntohl() */
+static inline void
+padlock_bswapl(AES_KEY *ks)
+{
+ size_t i = sizeof(ks->rd_key)/sizeof(ks->rd_key[0]);
+ unsigned int *key = ks->rd_key;
+
+ while (i--) {
+ asm volatile ("bswapl %0" : "+r"(*key));
+ key++;
+ }
+}
#endif
/* The RNG call itself */
@@ -485,8 +593,8 @@ padlock_xstore(void *addr, unsigned int
static inline unsigned char *
padlock_memcpy(void *dst,const void *src,size_t n)
{
- long *d=dst;
- const long *s=src;
+ size_t *d=dst;
+ const size_t *s=src;
n /= sizeof(*d);
do { *d++ = *s++; } while (--n);