diff --git a/0034.fipsinstall_disable.patch b/0034.fipsinstall_disable.patch new file mode 100644 index 0000000..b0e0c4b --- /dev/null +++ b/0034.fipsinstall_disable.patch @@ -0,0 +1,392 @@ +diff -up openssl-3.0.0/apps/fipsinstall.c.xxx openssl-3.0.0/apps/fipsinstall.c +--- openssl-3.0.0/apps/fipsinstall.c.xxx 2021-11-22 13:09:28.232560235 +0100 ++++ openssl-3.0.0/apps/fipsinstall.c 2021-11-22 13:12:22.272058910 +0100 +@@ -311,6 +311,9 @@ int fipsinstall_main(int argc, char **ar + EVP_MAC *mac = NULL; + CONF *conf = NULL; + ++ BIO_printf(bio_err, "This command is not enabled in the Red Hat Enterprise Linux OpenSSL build, please consult Red Hat documentation to learn how to enable FIPS mode\n"); ++ return 1; ++ + if ((opts = sk_OPENSSL_STRING_new_null()) == NULL) + goto end; + +diff -up openssl-3.0.0/doc/man1/openssl-fipsinstall.pod.in.xxx openssl-3.0.0/doc/man1/openssl-fipsinstall.pod.in +--- openssl-3.0.0/doc/man1/openssl-fipsinstall.pod.in.xxx 2021-11-22 13:19:55.192959061 +0100 ++++ openssl-3.0.0/doc/man1/openssl-fipsinstall.pod.in 2021-11-22 13:20:56.978491104 +0100 +@@ -8,224 +8,10 @@ openssl-fipsinstall - perform FIPS confi + =head1 SYNOPSIS + + B +-[B<-help>] +-[B<-in> I] +-[B<-out> I] +-[B<-module> I] +-[B<-provider_name> I] +-[B<-section_name> I] +-[B<-verify>] +-[B<-mac_name> I] +-[B<-macopt> I:I] +-[B<-noout>] +-[B<-quiet>] +-[B<-no_conditional_errors>] +-[B<-no_security_checks>] +-[B<-self_test_onload>] +-[B<-corrupt_desc> I] +-[B<-corrupt_type> I] +-[B<-config> I] + + =head1 DESCRIPTION + +-This command is used to generate a FIPS module configuration file. +-This configuration file can be used each time a FIPS module is loaded +-in order to pass data to the FIPS module self tests. The FIPS module always +-verifies its MAC, but optionally only needs to run the KAT's once, +-at installation. +- +-The generated configuration file consists of: +- +-=over 4 +- +-=item - A MAC of the FIPS module file. +- +-=item - A test status indicator. +- +-This indicates if the Known Answer Self Tests (KAT's) have successfully run. +- +-=item - A MAC of the status indicator. +- +-=item - A control for conditional self tests errors. +- +-By default if a continuous test (e.g a key pair test) fails then the FIPS module +-will enter an error state, and no services or cryptographic algorithms will be +-able to be accessed after this point. +-The default value of '1' will cause the fips module error state to be entered. +-If the value is '0' then the module error state will not be entered. +-Regardless of whether the error state is entered or not, the current operation +-(e.g. key generation) will return an error. The user is responsible for retrying +-the operation if the module error state is not entered. +- +-=item - A control to indicate whether run-time security checks are done. +- +-This indicates if run-time checks related to enforcement of security parameters +-such as minimum security strength of keys and approved curve names are used. +-The default value of '1' will perform the checks. +-If the value is '0' the checks are not performed and FIPS compliance must +-be done by procedures documented in the relevant Security Policy. +- +-=back +- +-This file is described in L. +- +-=head1 OPTIONS +- +-=over 4 +- +-=item B<-help> +- +-Print a usage message. +- +-=item B<-module> I +- +-Filename of the FIPS module to perform an integrity check on. +-The path provided in the filename is used to load the module when it is +-activated, and this overrides the environment variable B. +- +-=item B<-out> I +- +-Filename to output the configuration data to; the default is standard output. +- +-=item B<-in> I +- +-Input filename to load configuration data from. +-Must be used if the B<-verify> option is specified. +- +-=item B<-verify> +- +-Verify that the input configuration file contains the correct information. +- +-=item B<-provider_name> I +- +-Name of the provider inside the configuration file. +-The default value is C. +- +-=item B<-section_name> I +- +-Name of the section inside the configuration file. +-The default value is C. +- +-=item B<-mac_name> I +- +-Specifies the name of a supported MAC algorithm which will be used. +-The MAC mechanisms that are available will depend on the options +-used when building OpenSSL. +-To see the list of supported MAC's use the command +-C. The default is B. +- +-=item B<-macopt> I:I +- +-Passes options to the MAC algorithm. +-A comprehensive list of controls can be found in the EVP_MAC implementation +-documentation. +-Common control strings used for this command are: +- +-=over 4 +- +-=item B:I +- +-Specifies the MAC key as an alphanumeric string (use if the key contains +-printable characters only). +-The string length must conform to any restrictions of the MAC algorithm. +-A key must be specified for every MAC algorithm. +-If no key is provided, the default that was specified when OpenSSL was +-configured is used. +- +-=item B:I +- +-Specifies the MAC key in hexadecimal form (two hex digits per byte). +-The key length must conform to any restrictions of the MAC algorithm. +-A key must be specified for every MAC algorithm. +-If no key is provided, the default that was specified when OpenSSL was +-configured is used. +- +-=item B:I +- +-Used by HMAC as an alphanumeric string (use if the key contains printable +-characters only). +-The string length must conform to any restrictions of the MAC algorithm. +-To see the list of supported digests, use the command +-C. +-The default digest is SHA-256. +- +-=back +- +-=item B<-noout> +- +-Disable logging of the self tests. +- +-=item B<-no_conditional_errors> +- +-Configure the module to not enter an error state if a conditional self test +-fails as described above. +- +-=item B<-no_security_checks> +- +-Configure the module to not perform run-time security checks as described above. +- +-=item B<-self_test_onload> +- +-Do not write the two fields related to the "test status indicator" and +-"MAC status indicator" to the output configuration file. Without these fields +-the self tests KATS will run each time the module is loaded. This option could be +-used for cross compiling, since the self tests need to run at least once on each +-target machine. Once the self tests have run on the target machine the user +-could possibly then add the 2 fields into the configuration using some other +-mechanism. +- +-=item B<-quiet> +- +-Do not output pass/fail messages. Implies B<-noout>. +- +-=item B<-corrupt_desc> I, +-B<-corrupt_type> I +- +-The corrupt options can be used to test failure of one or more self tests by +-name. +-Either option or both may be used to select the tests to corrupt. +-Refer to the entries for B and B in L for +-values that can be used. +- +-=item B<-config> I +- +-Test that a FIPS provider can be loaded from the specified configuration file. +-A previous call to this application needs to generate the extra configuration +-data that is included by the base C configuration file. +-See L for further information on how to set up a provider section. +-All other options are ignored if '-config' is used. +- +-=back +- +-=head1 EXAMPLES +- +-Calculate the mac of a FIPS module F and run a FIPS self test +-for the module, and save the F configuration file: +- +- openssl fipsinstall -module ./fips.so -out fips.cnf -provider_name fips +- +-Verify that the configuration file F contains the correct info: +- +- openssl fipsinstall -module ./fips.so -in fips.cnf -provider_name fips -verify +- +-Corrupt any self tests which have the description C: +- +- openssl fipsinstall -module ./fips.so -out fips.cnf -provider_name fips \ +- -corrupt_desc 'SHA1' +- +-Validate that the fips module can be loaded from a base configuration file: +- +- export OPENSSL_CONF_INCLUDE= +- export OPENSSL_MODULES= +- openssl fipsinstall -config' 'default.cnf' +- +- +-=head1 SEE ALSO +- +-L, +-L, +-L, +-L ++This command is disabled. Please consult Red Hat Enterprise Linux documentation to learn how to correctly enable FIPS mode on Red Hat Enterprise Linux. + + =head1 COPYRIGHT + +diff -up openssl-3.0.0/doc/man1/openssl.pod.xxx openssl-3.0.0/doc/man1/openssl.pod +--- openssl-3.0.0/doc/man1/openssl.pod.xxx 2021-11-22 13:18:51.081406990 +0100 ++++ openssl-3.0.0/doc/man1/openssl.pod 2021-11-22 13:19:02.897508738 +0100 +@@ -158,10 +158,6 @@ Engine (loadable module) information and + + Error Number to Error String Conversion. + +-=item B +- +-FIPS configuration installation. +- + =item B + + Generation of DSA Private Key from Parameters. Superseded by +diff -up openssl-3.0.0/doc/man5/config.pod.xxx openssl-3.0.0/doc/man5/config.pod +--- openssl-3.0.0/doc/man5/config.pod.xxx 2021-11-22 13:24:51.359509501 +0100 ++++ openssl-3.0.0/doc/man5/config.pod 2021-11-22 13:26:02.360121820 +0100 +@@ -573,7 +573,6 @@ configuration files using that syntax wi + =head1 SEE ALSO + + L, L, L, +-L, + L, + L, + L, +diff -up openssl-3.0.0/doc/man5/fips_config.pod.xxx openssl-3.0.0/doc/man5/fips_config.pod +--- openssl-3.0.0/doc/man5/fips_config.pod.xxx 2021-11-22 13:21:13.812636065 +0100 ++++ openssl-3.0.0/doc/man5/fips_config.pod 2021-11-22 13:24:12.278172847 +0100 +@@ -6,106 +6,10 @@ fips_config - OpenSSL FIPS configuration + + =head1 DESCRIPTION + +-A separate configuration file, using the OpenSSL L syntax, +-is used to hold information about the FIPS module. This includes a digest +-of the shared library file, and status about the self-testing. +-This data is used automatically by the module itself for two +-purposes: +- +-=over 4 +- +-=item - Run the startup FIPS self-test known answer tests (KATS). +- +-This is normally done once, at installation time, but may also be set up to +-run each time the module is used. +- +-=item - Verify the module's checksum. +- +-This is done each time the module is used. +- +-=back +- +-This file is generated by the L program, and +-used internally by the FIPS module during its initialization. +- +-The following options are supported. They should all appear in a section +-whose name is identified by the B option in the B +-section, as described in L. +- +-=over 4 +- +-=item B +- +-If present, the module is activated. The value assigned to this name is not +-significant. +- +-=item B +- +-A version number for the fips install process. Should be 1. +- +-=item B +- +-The FIPS module normally enters an internal error mode if any self test fails. +-Once this error mode is active, no services or cryptographic algorithms are +-accessible from this point on. +-Continuous tests are a subset of the self tests (e.g., a key pair test during key +-generation, or the CRNG output test). +-Setting this value to C<0> allows the error mode to not be triggered if any +-continuous test fails. The default value of C<1> will trigger the error mode. +-Regardless of the value, the operation (e.g., key generation) that called the +-continuous test will return an error code if its continuous test fails. The +-operation may then be retried if the error mode has not been triggered. +- +-=item B +- +-This indicates if run-time checks related to enforcement of security parameters +-such as minimum security strength of keys and approved curve names are used. +-A value of '1' will perform the checks, otherwise if the value is '0' the checks +-are not performed and FIPS compliance must be done by procedures documented in +-the relevant Security Policy. +- +-=item B +- +-The calculated MAC of the FIPS provider file. +- +-=item B +- +-An indicator that the self-tests were successfully run. +-This should only be written after the module has +-successfully passed its self tests during installation. +-If this field is not present, then the self tests will run when the module +-loads. +- +-=item B +- +-A MAC of the value of the B option, to prevent accidental +-changes to that value. +-It is written-to at the same time as B is updated. +- +-=back +- +-For example: +- +- [fips_sect] +- activate = 1 +- install-version = 1 +- conditional-errors = 1 +- security-checks = 1 +- module-mac = 41:D0:FA:C2:5D:41:75:CD:7D:C3:90:55:6F:A4:DC +- install-mac = FE:10:13:5A:D3:B4:C7:82:1B:1E:17:4C:AC:84:0C +- install-status = INSTALL_SELF_TEST_KATS_RUN +- +-=head1 NOTES +- +-When using the FIPS provider, it is recommended that the +-B option is enabled to prevent accidental use of +-non-FIPS validated algorithms via broken or mistaken configuration. +-See L. +- +-=head1 SEE ALSO +- +-L +-L ++This command is disabled in Red Hat Enterprise Linux. The FIPS provider is ++automatically loaded when the system is boots in FIPS mode, or when the ++environment variable B is set. See the documentation ++for more information. + + =head1 COPYRIGHT + +diff -up openssl-3.0.0/doc/man7/OSSL_PROVIDER-FIPS.pod.xxx openssl-3.0.0/doc/man7/OSSL_PROVIDER-FIPS.pod +--- openssl-3.0.0/doc/man7/OSSL_PROVIDER-FIPS.pod.xxx 2021-11-22 13:18:13.850086386 +0100 ++++ openssl-3.0.0/doc/man7/OSSL_PROVIDER-FIPS.pod 2021-11-22 13:18:24.607179038 +0100 +@@ -388,7 +388,6 @@ A simple self test callback is shown bel + + =head1 SEE ALSO + +-L, + L, + L, + L, diff --git a/openssl.spec b/openssl.spec index 56068fb..acd69f2 100644 --- a/openssl.spec +++ b/openssl.spec @@ -62,6 +62,8 @@ Patch31: 0031-tmp-Fix-test-names.patch Patch32: 0032-Force-fips.patch # Embed HMAC into the fips.so Patch33: 0033-FIPS-embed-hmac.patch +# Comment out fipsinstall command-line utility +Patch34: 0034.fipsinstall_disable.patch # Tmp: coverity Patch100: 0100-coverity.patch