# -*- rpm-spec -*- # This spec file assumes you are building on a Fedora or RHEL version # that's still supported by the vendor. It may work on other distros # or versions, but no effort will be made to ensure that going forward. %define min_rhel 6 %define min_fedora 26 %if (0%{?fedora} && 0%{?fedora} >= %{min_fedora}) || (0%{?rhel} && 0%{?rhel} >= %{min_rhel}) %define supported_platform 1 %else %define supported_platform 0 %endif # Default to skipping autoreconf. Distros can change just this one line # (or provide a command-line override) if they backport any patches that # touch configure.ac or Makefile.am. # Always run autoreconf %{!?enable_autotools:%global enable_autotools 1} # The hypervisor drivers that run in libvirtd %define with_qemu 0%{!?_without_qemu:1} %define with_lxc 0%{!?_without_lxc:1} %define with_uml 0%{!?_without_uml:1} %define with_libxl 0%{!?_without_libxl:1} %define with_vbox 0%{!?_without_vbox:1} %define with_qemu_tcg %{with_qemu} %define qemu_kvm_arches %{ix86} x86_64 %if 0%{?fedora} %define qemu_kvm_arches %{ix86} x86_64 %{power64} s390x %{arm} aarch64 %endif %if 0%{?rhel} %define with_qemu_tcg 0 %define qemu_kvm_arches x86_64 %if 0%{?rhel} >= 7 %define qemu_kvm_arches x86_64 %{power64} aarch64 s390x %endif %endif %ifarch %{qemu_kvm_arches} %define with_qemu_kvm %{with_qemu} %else %define with_qemu_kvm 0 %endif %if ! %{with_qemu_tcg} && ! %{with_qemu_kvm} %define with_qemu 0 %endif # Then the hypervisor drivers that run outside libvirtd, in libvirt.so %define with_openvz 0%{!?_without_openvz:1} %define with_vmware 0%{!?_without_vmware:1} %define with_phyp 0%{!?_without_phyp:1} %define with_esx 0%{!?_without_esx:1} %define with_hyperv 0%{!?_without_hyperv:1} # Then the secondary host drivers, which run inside libvirtd %if 0%{?fedora} || 0%{?rhel} >= 7 %define with_storage_rbd 0%{!?_without_storage_rbd:1} %else %define with_storage_rbd 0 %endif %if 0%{?fedora} %define with_storage_sheepdog 0%{!?_without_storage_sheepdog:1} %else %define with_storage_sheepdog 0 %endif %define with_numactl 0%{!?_without_numactl:1} %define with_storage_gluster 0%{!?_without_storage_gluster:1} %ifnarch %{qemu_kvm_arches} # gluster is only built where qemu driver is enabled on RHEL 8 %if 0%{?rhel} >= 8 %define with_storage_gluster 0 %endif %endif # F25+ has zfs-fuse %if 0%{?fedora} %define with_storage_zfs 0%{!?_without_storage_zfs:1} %else %define with_storage_zfs 0 %endif # A few optional bits off by default, we enable later %define with_fuse 0%{!?_without_fuse:0} %define with_sanlock 0%{!?_without_sanlock:0} %define with_systemd 0%{!?_without_systemd:0} %define with_numad 0%{!?_without_numad:0} %define with_firewalld 0%{!?_without_firewalld:0} %define with_firewalld_zone 0%{!?_without_firewalld_zone:0} %define with_libssh2 0%{!?_without_libssh2:0} %define with_wireshark 0%{!?_without_wireshark:0} %define with_libssh 0%{!?_without_libssh:0} %define with_bash_completion 0%{!?_without_bash_completion:0} %define with_pm_utils 1 # Finally set the OS / architecture specific special cases # Xen is available only on i386 x86_64 ia64 %ifnarch %{ix86} x86_64 ia64 %define with_libxl 0 %endif # vbox is available only on i386 x86_64 %ifnarch %{ix86} x86_64 %define with_vbox 0 %endif # Numactl is not available on s390[x] and ARM %ifarch s390 s390x %{arm} %define with_numactl 0 %endif # zfs-fuse is not available on some architectures %ifarch s390 s390x aarch64 %define with_storage_zfs 0 %endif # RHEL doesn't ship OpenVZ, VBox, UML, PowerHypervisor, # VMware, libxenserver (xenapi), libxenlight (Xen 4.1 and newer), # or HyperV. %if 0%{?rhel} %define with_openvz 0 %define with_vbox 0 %define with_uml 0 %define with_phyp 0 %define with_vmware 0 %define with_xenapi 0 %define with_libxl 0 %define with_hyperv 0 %define with_vz 0 %if 0%{?rhel} > 7 %define with_lxc 0 %endif %endif # Fedora 17 / RHEL-7 are first where we use systemd. Although earlier # Fedora has systemd, libvirt still used sysvinit there. %if 0%{?fedora} || 0%{?rhel} >= 7 %define with_systemd 1 %define with_pm_utils 0 %endif # Fedora 18 / RHEL-7 are first where firewalld support is enabled %if 0%{?fedora} || 0%{?rhel} >= 7 %define with_firewalld 1 %endif %if 0%{?fedora} >= 30 || 0%{?rhel} > 7 %define with_firewalld_zone 0%{!?_without_firewalld_zone:1} %endif # fuse is used to provide virtualized /proc for LXC %if %{with_lxc} && 0%{?rhel} != 6 %define with_fuse 0%{!?_without_fuse:1} %endif # Enable sanlock library for lock management with QEMU # Sanlock is available only on arches where kvm is available for RHEL %if 0%{?fedora} %define with_sanlock 0%{!?_without_sanlock:1} %endif %if 0%{?rhel} %ifarch %{qemu_kvm_arches} %define with_sanlock 0%{!?_without_sanlock:1} %endif %endif # Enable libssh2 transport for new enough distros %if 0%{?fedora} %define with_libssh2 0%{!?_without_libssh2:1} %endif # Enable wireshark plugins for all distros shipping libvirt 1.2.2 or newer %if 0%{?fedora} %define with_wireshark 0%{!?_without_wireshark:1} %endif %if 0%{?fedora} || 0%{?rhel} > 7 %define wireshark_plugindir %(pkg-config --variable plugindir wireshark) %else %define wireshark_plugindir %{_libdir}/wireshark/plugins %endif # Enable libssh transport for new enough distros %if 0%{?fedora} || 0%{?rhel} > 7 %define with_libssh 0%{!?_without_libssh:1} %endif # Enable bash-completion for new enough distros %if 0%{?fedora} || 0%{?rhel} >= 7 %define with_bash_completion 0%{!?_without_bash_completion:1} %endif # Use Python 3 when possible, Python 2 otherwise %if 0%{?fedora} %define python python3 %else %if 0%{?rhel} > 7 %define python python3-devel %else %define python python2 %endif %endif %if %{with_qemu} || %{with_lxc} || %{with_uml} # numad is used to manage the CPU and memory placement dynamically, # it's not available on s390[x] and ARM. %ifnarch s390 s390x %{arm} %define with_numad 0%{!?_without_numad:1} %endif %endif # Force QEMU to run as non-root %define qemu_user qemu %define qemu_group qemu %if 0%{?fedora} || 0%{?rhel} >= 7 %define with_systemd_macros 1 %else %define with_systemd_macros 0 %endif # RHEL releases provide stable tool chains and so it is safe to turn # compiler warning into errors without being worried about frequent # changes in reported warnings %if 0%{?rhel} %define enable_werror --enable-werror %else %define enable_werror --disable-werror %endif %if 0%{?rhel} == 7 %define tls_priority "NORMAL" %else %define tls_priority "@LIBVIRT,SYSTEM" %endif Summary: Library providing a simple virtualization API Name: libvirt Version: 4.5.0 Release: 37%{?dist}%{?extra_release} License: LGPLv2+ URL: https://libvirt.org/ %if %(echo %{version} | grep -q "\.0$"; echo $?) == 1 %define mainturl stable_updates/ %endif Source: https://libvirt.org/sources/%{?mainturl}libvirt-%{version}.tar.xz Source1: symlinks Patch1: libvirt-RHEL-Hack-around-changed-Broadwell-Haswell-CPUs.patch Patch2: libvirt-RHEL-Add-rhel-machine-types-to-qemuDomainMachineNeedsFDC.patch Patch3: libvirt-qemu-Add-capability-for-the-HTM-pSeries-feature.patch Patch4: libvirt-conf-Parse-and-format-the-HTM-pSeries-feature.patch Patch5: libvirt-qemu-Format-the-HTM-pSeries-feature.patch Patch6: libvirt-qemu-hotplug-Don-t-access-srcPriv-when-it-s-not-allocated.patch Patch7: libvirt-qemuDomainNestedJobAllowed-Allow-QEMU_JOB_NONE.patch Patch8: libvirt-src-Mention-DEVICE_REMOVAL_FAILED-event-in-virDomainDetachDeviceAlias-docs.patch Patch9: libvirt-virsh.pod-Drop-persistent-for-detach-device-alias.patch Patch10: libvirt-qemu-don-t-use-chardev-FD-passing-with-standalone-args.patch Patch11: libvirt-qemu-remove-chardevStdioLogd-param-from-vhostuser-code-path.patch Patch12: libvirt-qemu-consolidate-parameters-of-qemuBuildChrChardevStr-into-flags.patch Patch13: libvirt-qemu-don-t-use-chardev-FD-passing-for-vhostuser-backend.patch Patch14: libvirt-qemu-fix-UNIX-socket-chardevs-operating-in-client-mode.patch Patch15: libvirt-qemuDomainDeviceDefValidateNetwork-Check-for-range-only-if-IP-prefix-set.patch Patch16: libvirt-qemu-hotplug-Do-not-try-to-add-secret-object-for-TLS-if-it-does-not-exist.patch Patch17: libvirt-qemu-monitor-Make-qemuMonitorAddObject-more-robust-against-programming-errors.patch Patch18: libvirt-virDomainConfNWFilterInstantiate-initialize-xml-to-avoid-random-crash.patch Patch19: libvirt-qemuProcessStartPRDaemonHook-Try-to-set-NS-iff-domain-was-started-with-one.patch Patch20: libvirt-qemuDomainValidateStorageSource-Relax-PR-validation.patch Patch21: libvirt-virStoragePRDefFormat-Suppress-path-formatting-for-migratable-XML.patch Patch22: libvirt-qemu-Wire-up-PR_MANAGER_STATUS_CHANGED-event.patch Patch23: libvirt-qemu_monitor-Introduce-qemuMonitorJSONGetPRManagerInfo.patch Patch24: libvirt-qemu-Fetch-pr-helper-process-info-on-reconnect.patch Patch25: libvirt-qemu-Fix-ATTRIBUTE_NONNULL-for-qemuMonitorAddObject.patch Patch26: libvirt-virsh.pod-Fix-a-command-name-typo-in-nwfilter-binding-undefine.patch Patch27: libvirt-docs-schema-Add-missing-alias-to-vsock-device.patch Patch28: libvirt-virnetdevtap-Don-t-crash-on-ifname-in-virNetDevTapInterfaceStats.patch Patch29: libvirt-tests-fix-TLS-handshake-failure-with-TLS-1.3.patch Patch30: libvirt-qemu-hotplug-don-t-overwrite-error-message-in-qemuDomainAttachNetDevice.patch Patch31: libvirt-qemu-hotplug-report-error-when-changing-rom-enabled-attr-for-net-iface.patch Patch32: libvirt-qemu-Fix-setting-global_period-cputune-element.patch Patch33: libvirt-tests-qemucaps-Add-test-data-for-upcoming-qemu-3.0.0.patch Patch34: libvirt-qemu-capabilities-Add-capability-for-werror-rerror-for-usb-device-frontend.patch Patch35: libvirt-qemu-command-Move-graphics-iteration-to-its-own-function.patch Patch36: libvirt-qemu-address-Handle-all-the-video-devices-within-a-single-loop.patch Patch37: libvirt-conf-Introduce-virDomainVideoDefClear-helper.patch Patch38: libvirt-conf-Introduce-virDomainDefPostParseVideo-helper.patch Patch39: libvirt-qemu-validate-Enforce-compile-time-switch-type-checking-for-videos.patch Patch40: libvirt-tests-Add-capabilities-data-for-QEMU-2.11-x86_64.patch Patch41: libvirt-tests-Update-capabilities-data-for-QEMU-3.0.0-x86_64.patch Patch42: libvirt-qemu-qemuBuildHostdevCommandLine-Use-a-helper-variable-mdevsrc.patch Patch43: libvirt-qemu-caps-Introduce-a-capability-for-egl-headless.patch Patch44: libvirt-qemu-Introduce-a-new-graphics-display-type-headless.patch Patch45: libvirt-qemu-caps-Add-vfio-pci.display-capability.patch Patch46: libvirt-conf-Introduce-virDomainGraphicsDefHasOpenGL-helper.patch Patch47: libvirt-conf-Replace-error-with-cleanup-in-virDomainHostdevDefParseXMLSubsys.patch Patch48: libvirt-conf-Introduce-new-hostdev-attribute-display.patch Patch49: libvirt-qemu-command-Enable-formatting-vfio-pci.display-option-onto-cmdline.patch Patch50: libvirt-docs-Rephrase-the-mediated-devices-hostdev-section-a-bit.patch Patch51: libvirt-conf-Introduce-new-video-type-none.patch Patch52: libvirt-virt-xml-validate-Add-schema-for-nwfilterbinding.patch Patch53: libvirt-tools-Fix-typo-generating-adapter_wwpn-field.patch Patch54: libvirt-src-Fix-memory-leak-in-virNWFilterBindingDispose.patch Patch55: libvirt-esx-storage-Fix-typo-lsilogic-lsiLogic.patch Patch56: libvirt-networkGetDHCPLeases-Don-t-always-report-error-if-unable-to-read-leases-file.patch Patch57: libvirt-nwfilter-Resolve-SEGV-for-NWFilter-Snoop-processing.patch Patch58: libvirt-qemu-Remove-unused-bypassSecurityDriver-from-qemuOpenFileAs.patch Patch59: libvirt-qemuDomainSaveMemory-Don-t-enforce-dynamicOwnership.patch Patch60: libvirt-domain_nwfilter-Return-early-if-net-has-no-name-in-virDomainConfNWFilterTeardownImpl.patch Patch61: libvirt-examples-Add-clean-traffic-gateway-into-nwfilters.patch Patch62: libvirt-qemu-Exempt-video-model-none-from-getting-a-PCI-address-on-Q35.patch Patch63: libvirt-conf-Fix-a-error-msg-typo-in-virDomainVideoDefValidate.patch Patch64: libvirt-qemu_migration-Avoid-writing-to-freed-memory.patch Patch65: libvirt-tests-Add-missing-thread_siblings_list-files.patch Patch66: libvirt-util-Rewrite-virHostCPUCountThreadSiblings.patch Patch67: libvirt-utils-Remove-arbitrary-limit-on-socket_id-core_id.patch Patch68: libvirt-tests-Add-linux-high-ids-test.patch Patch69: libvirt-qemu-hotplug-Fix-asynchronous-unplug-of-shmem.patch Patch70: libvirt-tests-rename-hugepages-to-hugepages-default.patch Patch71: libvirt-tests-extract-hugepages-numa-default-dimm-out-of-hugepages-numa.patch Patch72: libvirt-tests-rename-hugepages-numa-into-hugepages-numa-default.patch Patch73: libvirt-tests-remove-unnecessary-XML-elements-from-hugepages-numa-default.patch Patch74: libvirt-tests-extract-pages-discard-out-of-hugepages-pages.patch Patch75: libvirt-tests-rename-hugepages-pages-into-hugepages-numa-nodeset.patch Patch76: libvirt-tests-rename-hugepages-pages2-into-hugepages-numa-default-2M.patch Patch77: libvirt-tests-extract-pages-discard-hugepages-out-of-hugepages-pages3.patch Patch78: libvirt-tests-rename-hugepages-pages3-into-hugepages-numa-nodeset-part.patch Patch79: libvirt-tests-rename-hugepages-pages4-into-hugepages-numa-nodeset-nonexist.patch Patch80: libvirt-tests-rename-hugepages-pages5-into-hugepages-default-2M.patch Patch81: libvirt-tests-rename-hugepages-pages6-into-hugepages-default-system-size.patch Patch82: libvirt-tests-rename-hugepages-pages7-into-pages-dimm-discard.patch Patch83: libvirt-tests-rename-hugepages-pages8-into-hugepages-nodeset-nonexist.patch Patch84: libvirt-tests-introduce-hugepages-default-1G-nodeset-2M.patch Patch85: libvirt-tests-introduce-hugepages-nodeset.patch Patch86: libvirt-conf-Move-hugepage-XML-validation-check-out-of-qemu_command.patch Patch87: libvirt-conf-Move-hugepages-validation-out-of-XML-parser.patch Patch88: libvirt-conf-Introduce-virDomainDefPostParseMemtune.patch Patch89: libvirt-tests-sev-Test-launch-security-with-specific-QEMU-version.patch Patch90: libvirt-qemu-Fix-probing-of-AMD-SEV-support.patch Patch91: libvirt-qemu-caps-Format-SEV-platform-data-into-qemuCaps-cache.patch Patch92: libvirt-conf-Parse-guestfwd-channel-device-info-again.patch Patch93: libvirt-RHEL-Fix-virConnectGetMaxVcpus-output.patch Patch94: libvirt-storage-Add-shrink-to-qemu-img-command-when-shrinking-vol.patch Patch95: libvirt-access-Fix-nwfilter-binding-ACL-access-API-name-generation.patch Patch96: libvirt-conf-Add-validation-of-input-devices.patch Patch97: libvirt-tests-qemu-Remove-disk-from-graphics-vnc-tls.patch Patch98: libvirt-tests-qemu-test-more-versions-for-graphics-vnc-tls.patch Patch99: libvirt-qemu-vnc-switch-to-tls-creds-x509.patch Patch100: libvirt-qemu-mdev-Use-vfio-pci-display-property-only-with-vfio-pci-mdevs.patch Patch101: libvirt-virDomainDefCompatibleDevice-Relax-alias-change-check.patch Patch102: libvirt-virDomainDetachDeviceFlags-Clarify-update-semantics.patch Patch103: libvirt-virDomainNetDefCheckABIStability-Check-for-MTU-change-too.patch Patch104: libvirt-qemu-monitor-Remove-qemuMonitorJSONExtractCPUArchInfo-wrapper.patch Patch105: libvirt-qemu-monitor-Use-target-instead-of-arch-in-reply-of-query-cpus-fast.patch Patch106: libvirt-conf-Fix-check-for-chardev-source-path.patch Patch107: libvirt-tests-Reuse-qemucapabilities-data-for-qemucaps2xml.patch Patch108: libvirt-tests-Add-more-tests-to-qemucaps2xml.patch Patch109: libvirt-qemu-Drop-QEMU_CAPS_ENABLE_KVM.patch Patch110: libvirt-qemu-Avoid-probing-non-native-binaries-all-the-time.patch Patch111: libvirt-qemu-Clarify-QEMU_CAPS_KVM.patch Patch112: libvirt-qemu-Don-t-check-for-dev-kvm-presence.patch Patch113: libvirt-tests-Follow-up-on-qemucaps2xmldata-rename.patch Patch114: libvirt-security-dac-also-label-listen-UNIX-sockets.patch Patch115: libvirt-virsh-Require-explicit-domain-for-domxml-to-native.patch Patch116: libvirt-virFileIsSharedFSType-Check-for-fuse.glusterfs-too.patch Patch117: libvirt-qemu-fix-up-permissions-for-pre-created-UNIX-sockets.patch Patch118: libvirt-cpu_map-Add-features-for-Icelake-CPUs.patch Patch119: libvirt-cpu_map-Add-Icelake-CPU-models.patch Patch120: libvirt-qemu-Properly-report-VIR_DOMAIN_EVENT_RESUMED_FROM_SNAPSHOT.patch Patch121: libvirt-qemu-Report-more-appropriate-running-reasons.patch Patch122: libvirt-qemu-Pass-running-reason-to-RESUME-event-handler.patch Patch123: libvirt-qemu-Map-running-reason-to-resume-event-detail.patch Patch124: libvirt-qemu-Avoid-duplicate-resume-events-and-state-changes.patch Patch125: libvirt-conf-qemu-add-support-for-Hyper-V-frequency-MSRs.patch Patch126: libvirt-conf-qemu-add-support-for-Hyper-V-reenlightenment-notifications.patch Patch127: libvirt-conf-qemu-add-support-for-Hyper-V-PV-TLB-flush.patch Patch128: libvirt-virfile-fix-cast-align-error.patch Patch129: libvirt-virfiletest-Fix-test-name-prefix-for-virFileInData-test.patch Patch130: libvirt-virfiletst-Test-virFileIsSharedFS.patch Patch131: libvirt-virFileIsSharedFSType-Detect-direct-mount-points.patch Patch132: libvirt-virfile-Rework-virFileIsSharedFixFUSE.patch Patch133: libvirt-RHEL-network-regain-guest-network-connectivity-after-firewalld-switch-to-nftables.patch Patch134: libvirt-storage-Remove-secretPath-from-_virStorageBackendQemuImgInfo.patch Patch135: libvirt-storage-Allow-for-inputvol-to-have-any-format-for-encryption.patch Patch136: libvirt-storage-Allow-inputvol-to-be-encrypted.patch Patch137: libvirt-access-Modify-the-VIR_ERR_ACCESS_DENIED-to-include-driverName.patch Patch138: libvirt-docs-Enhance-polkit-documentation-to-describe-secondary-connection.patch Patch139: libvirt-qemu-Don-t-ignore-resume-events.patch Patch140: libvirt-virfile-Take-symlink-into-account-in-virFileIsSharedFixFUSE.patch Patch141: libvirt-qemu-Ignore-nwfilter-binding-instantiation-issues-during-reconnect.patch Patch142: libvirt-qemu-Set-identity-for-the-reconnect-all-thread.patch Patch143: libvirt-Revert-access-Modify-the-VIR_ERR_ACCESS_DENIED-to-include-driverName.patch Patch144: libvirt-access-Modify-the-VIR_ERR_ACCESS_DENIED-to-include-driverName_1.patch Patch145: libvirt-qemu-add-vfio-ap-capability.patch Patch146: libvirt-qemu-vfio-ap-device-support.patch Patch147: libvirt-qemu-Extract-MDEV-VFIO-PCI-validation-code-into-a-separate-helper.patch Patch148: libvirt-conf-Move-VFIO-AP-validation-from-post-parse-to-QEMU-validation-code.patch Patch149: libvirt-qemu-Fix-post-copy-migration-on-the-source.patch Patch150: libvirt-util-Don-t-overflow-in-virRandomBits.patch Patch151: libvirt-virrandom-Avoid-undefined-behaviour-in-virRandomBits.patch Patch152: libvirt-qemu-Drop-duplicated-code-from-qemuDomainDefValidateFeatures.patch Patch153: libvirt-tests-Add-capabilities-data-for-QEMU-3.1.0-on-ppc64.patch Patch154: libvirt-qemu-Introduce-QEMU_CAPS_MACHINE_PSERIES_CAP_NESTED_HV.patch Patch155: libvirt-conf-Parse-and-format-nested-hv-feature.patch Patch156: libvirt-qemu-Format-nested-hv-feature-on-the-command-line.patch Patch157: libvirt-qemu-Add-check-for-whether-KVM-nesting-is-enabled.patch Patch158: libvirt-secret-Add-check-validation-for-correct-usage-when-LookupByUUID.patch Patch159: libvirt-cpu-Add-support-for-stibp-x86_64-feature.patch Patch160: libvirt-virsh-Strip-XML-declaration-when-extracting-CPU-XMLs.patch Patch161: libvirt-RHEL-qemu-Add-ability-to-set-sgio-values-for-hostdev.patch Patch162: libvirt-RHEL-qemu-Add-check-for-unpriv-sgio-for-SCSI-generic-host-device.patch Patch163: libvirt-qemu-Alter-val-usage-in-qemuSetUnprivSGIO.patch Patch164: libvirt-qemu-Alter-qemuSetUnprivSGIO-hostdev-shareable-logic.patch Patch165: libvirt-conf-correct-false-boot-order-error-during-domain-parse.patch Patch166: libvirt-qemu-Remove-duplicated-qemuAgentCheckError.patch Patch167: libvirt-qemu-require-reply-from-guest-agent-in-qemuAgentGetInterfaces.patch Patch168: libvirt-qemu-Filter-non-SCSI-hostdevs-in-qemuHostdevPrepareSCSIDevices.patch Patch169: libvirt-util-remove-const-specifier-from-nlmsghdr-arg-to-virNetlinkDumpCallback.patch Patch170: libvirt-util-add-a-function-to-insert-new-interfaces-to-IPv6CheckForwarding-list.patch Patch171: libvirt-util-use-nlmsg_find_attr-instead-of-an-open-coded-loop.patch Patch172: libvirt-util-check-accept_ra-for-all-nexthop-interfaces-of-multipath-routes.patch Patch173: libvirt-util-make-forgotten-changes-suggested-during-review-of-commit-d40b820c.patch Patch174: libvirt-qemu-Fix-logic-error-in-qemuSetUnprivSGIO.patch Patch175: libvirt-tests-qemuxml2argv-Add-test-case-for-empty-CDROM-with-cache-mode.patch Patch176: libvirt-qemu-command-Don-t-format-image-properties-for-empty-drive.patch Patch177: libvirt-RHEL-qemu-Fix-crash-trying-to-use-iSCSI-hostdev.patch Patch178: libvirt-docs-Drop-dev-net-tun-from-the-list-of-shared-devices.patch Patch179: libvirt-qemu-conf-Remove-dev-sev-from-the-default-cgroup-device-acl-list.patch Patch180: libvirt-qemu-cgroup-Expose-dev-sev-only-to-domains-that-require-SEV.patch Patch181: libvirt-qemu-domain-Add-dev-sev-into-the-domain-mount-namespace-selectively.patch Patch182: libvirt-security-dac-Relabel-dev-sev-in-the-namespace.patch Patch183: libvirt-qemu-caps-Use-CAP_DAC_OVERRIDE-for-probing-to-avoid-permission-issues.patch Patch184: libvirt-qemu-caps-Don-t-try-to-ask-for-CAP_DAC_OVERRIDE-if-non-root.patch Patch185: libvirt-Revert-RHEL-network-regain-guest-network-connectivity-after-firewalld-switch-to-nftables.patch Patch186: libvirt-configure-change-HAVE_FIREWALLD-to-WITH_FIREWALLD.patch Patch187: libvirt-util-move-all-firewalld-specific-stuff-into-its-own-files.patch Patch188: libvirt-util-new-virFirewallD-APIs-docs.patch Patch189: libvirt-configure-selectively-install-a-firewalld-libvirt-zone.patch Patch190: libvirt-network-set-firewalld-zone-of-bridges-to-libvirt-zone-when-appropriate.patch Patch191: libvirt-network-allow-configuring-firewalld-zone-for-virtual-network-bridge-device.patch Patch192: libvirt-util-remove-test-code-accidentally-committed-to-virFirewallDZoneExists.patch Patch193: libvirt-qemu-command-Don-t-skip-readonly-and-throttling-info-for-empty-drive.patch Patch194: libvirt-util-fix-memory-leak-in-virFirewallDInterfaceSetZone.patch Patch195: libvirt-network-explicitly-allow-icmp-icmpv6-in-libvirt-zonefile.patch Patch196: libvirt-tests-qemuxml2argv-add-CAPS_ARCH_LATEST-macro.patch Patch197: libvirt-qemu-Add-ccw-support-for-vhost-vsock.patch Patch198: libvirt-qemu-Allow-creating-ppc64-guests-with-graphics-and-no-USB-mouse.patch Patch199: libvirt-conf-Expose-virDomainSCSIDriveAddressIsUsed.patch Patch200: libvirt-qemuhotplugtest-Don-t-plug-a-SCSI-disk-at-unit-7.patch Patch201: libvirt-qemu_hotplug-Check-for-duplicate-drive-addresses.patch Patch202: libvirt-cpu_map-Add-support-for-cldemote-CPU-feature.patch Patch203: libvirt-util-alloc-add-macros-for-implementing-automatic-cleanup-functionality.patch Patch204: libvirt-qemu-domain-Simplify-non-VFIO-memLockLimit-calculation-for-PPC64.patch Patch205: libvirt-qemu_domain-add-a-PPC64-memLockLimit-helper.patch Patch206: libvirt-qemu_domain-NVLink2-bridge-detection-function-for-PPC64.patch Patch207: libvirt-PPC64-support-for-NVIDIA-V100-GPU-with-NVLink2-passthrough.patch Patch208: libvirt-cpu_x86-Do-not-cache-microcode-version.patch Patch209: libvirt-qemu-Don-t-cache-microcode-version.patch Patch210: libvirt-cputest-Add-data-for-Intel-R-Xeon-R-CPU-E3-1225-v5.patch Patch211: libvirt-cpu_map-Define-md-clear-CPUID-bit.patch Patch212: libvirt-admin-reject-clients-unless-their-UID-matches-the-current-UID.patch Patch213: libvirt-locking-restrict-sockets-to-mode-0600.patch Patch214: libvirt-logging-restrict-sockets-to-mode-0600.patch Patch215: libvirt-util-skip-RDMA-detection-for-non-PCI-network-devices.patch Patch216: libvirt-virfile-Detect-ceph-as-shared-FS.patch Patch217: libvirt-virfile-added-GPFS-as-shared-fs.patch Patch218: libvirt-util-bitmap-define-cleanup-function-using-VIR_DEFINE_AUTOPTR_FUNC.patch Patch219: libvirt-qemu-Rework-setting-process-affinity.patch Patch220: libvirt-qemu-Set-up-EMULATOR-thread-and-cpuset.mems-before-exec-ing-qemu.patch Patch221: libvirt-conf-Add-definitions-for-uid-and-fid-PCI-address-attributes.patch Patch222: libvirt-qemu-Introduce-zPCI-capability.patch Patch223: libvirt-qemu-Enable-PCI-multi-bus-for-S390-guests.patch Patch224: libvirt-conf-Introduce-extension-flag-and-zPCI-member-for-PCI-address.patch Patch225: libvirt-conf-Introduce-address-caching-for-PCI-extensions.patch Patch226: libvirt-qemu-Auto-add-pci-root-for-s390-s390x-guests.patch Patch227: libvirt-conf-use-virXMLFormatElement-in-virDomainDeviceInfoFormat.patch Patch228: libvirt-conf-Introduce-parser-formatter-for-uid-and-fid.patch Patch229: libvirt-qemu-Add-zPCI-address-definition-check.patch Patch230: libvirt-conf-Allocate-release-uid-and-fid-in-PCI-address.patch Patch231: libvirt-qemu-Generate-and-use-zPCI-device-in-QEMU-command-line.patch Patch232: libvirt-qemu-Add-hotpluging-support-for-PCI-devices-on-S390-guests.patch Patch233: libvirt-qemuDomainRemoveRNGDevice-Remove-associated-chardev-too.patch Patch234: libvirt-qemu_hotplug-remove-erroneous-call-to-qemuDomainDetachExtensionDevice.patch Patch235: libvirt-qemu_hotplug-remove-another-erroneous-qemuDomainDetachExtensionDevice-call.patch Patch236: libvirt-util-Propagate-numad-failures-correctly.patch Patch237: libvirt-util-Introduce-virBitmapUnion.patch Patch238: libvirt-util-Introduce-virNumaNodesetToCPUset.patch Patch239: libvirt-qemu-Fix-qemuProcessInitCpuAffinity.patch Patch240: libvirt-qemu-Fix-leak-in-qemuProcessInitCpuAffinity.patch Patch241: libvirt-qemu-Drop-cleanup-label-from-qemuProcessInitCpuAffinity.patch Patch242: libvirt-qemu-Fix-NULL-pointer-access-in-qemuProcessInitCpuAffinity.patch Patch243: libvirt-qemuBuildMemoryBackendProps-Pass-priv-instead-of-its-individual-members.patch Patch244: libvirt-qemu-Don-t-use-mem-prealloc-among-with-.prealloc-yes.patch Patch245: libvirt-nwfilter-fix-adding-std-MAC-and-IP-values-to-filter-binding.patch Patch246: libvirt-qemuProcessBuildDestroyMemoryPathsImpl-Don-t-overwrite-error.patch Patch247: libvirt-qemu_security-Fully-implement-qemuSecurityDomainSetPathLabel.patch Patch248: libvirt-qemu-process-SEV-Assume-libDir-to-be-the-directory-to-create-files-in.patch Patch249: libvirt-qemu-process-SEV-Relabel-guest-owner-s-SEV-files-created-before-start.patch Patch250: libvirt-api-disallow-virDomainSaveImageGetXMLDesc-on-read-only-connections.patch Patch251: libvirt-api-disallow-virDomainManagedSaveDefineXML-on-read-only-connections.patch Patch252: libvirt-api-disallow-virConnectGetDomainCapabilities-on-read-only-connections.patch Patch253: libvirt-api-disallow-virConnect-HypervisorCPU-on-read-only-connections.patch Patch254: libvirt-rpc-virnetlibsshsession-update-deprecated-functions.patch Patch255: libvirt-cpu-allow-include-files-for-CPU-definition.patch Patch256: libvirt-cpu-fix-cleanup-when-signature-parsing-fails.patch Patch257: libvirt-cpu-push-more-parsing-logic-into-common-code.patch Patch258: libvirt-cpu-simplify-failure-cleanup-paths.patch Patch259: libvirt-cpu_map-Add-support-for-arch-capabilities-feature.patch Patch260: libvirt-cputest-Add-data-for-Intel-R-Xeon-R-CPU-E5-2630-v4.patch Patch261: libvirt-cputest-Add-data-for-Intel-R-Core-TM-i7-7600U.patch Patch262: libvirt-cputest-Add-data-for-Intel-R-Xeon-R-CPU-E7540.patch Patch263: libvirt-cputest-Add-data-for-Intel-R-Xeon-R-CPU-E5-2650.patch Patch264: libvirt-cputest-Add-data-for-Intel-R-Core-TM-i7-8700.patch Patch265: libvirt-cpu_x86-Separate-ancestor-model-parsing-from-x86ModelParse.patch Patch266: libvirt-cpu_x86-Separate-signature-parsing-from-x86ModelParse.patch Patch267: libvirt-cpu_x86-Separate-vendor-parsing-from-x86ModelParse.patch Patch268: libvirt-cpu_x86-Separate-feature-list-parsing-from-x86ModelParse.patch Patch269: libvirt-cpu_x86-Make-sure-CPU-model-names-are-unique-in-cpu_map.patch Patch270: libvirt-cpu_x86-Add-x86ModelCopySignatures-helper.patch Patch271: libvirt-cpu_x86-Store-CPU-signature-in-an-array.patch Patch272: libvirt-cpu_x86-Allow-multiple-signatures-for-a-CPU-model.patch Patch273: libvirt-cpu_x86-Log-decoded-CPU-model-and-signatures.patch Patch274: libvirt-qemu_capabilities-Inroduce-virQEMUCapsGetCPUModelX86Data.patch Patch275: libvirt-qemu_capabilities-Introduce-virQEMUCapsGetCPUModelInfo.patch Patch276: libvirt-qemu_capabilities-Use-virQEMUCapsGetCPUModelInfo.patch Patch277: libvirt-cpu_x86-Add-virCPUx86DataGetSignature-for-tests.patch Patch278: libvirt-cpu_map-Add-hex-representation-of-signatures.patch Patch279: libvirt-cputest-Test-CPU-signatures.patch Patch280: libvirt-cpu_map-Add-more-signatures-for-Conroe-CPU-model.patch Patch281: libvirt-cpu_map-Add-more-signatures-for-Penryn-CPU-model.patch Patch282: libvirt-cpu_map-Add-more-signatures-for-Nehalem-CPU-models.patch Patch283: libvirt-cpu_map-Add-more-signatures-for-Westmere-CPU-model.patch Patch284: libvirt-cpu_map-Add-more-signatures-for-SandyBridge-CPU-models.patch Patch285: libvirt-cpu_map-Add-more-signatures-for-IvyBridge-CPU-models.patch Patch286: libvirt-cpu_map-Add-more-signatures-for-Haswell-CPU-models.patch Patch287: libvirt-cpu_map-Add-more-signatures-for-Broadwell-CPU-models.patch Patch288: libvirt-cpu_map-Add-more-signatures-for-Skylake-Client-CPU-models.patch Patch289: libvirt-cpu-Don-t-access-invalid-memory-in-virCPUx86Translate.patch Patch290: libvirt-cpu_x86-Require-cpuid-within-feature-in-CPU-map.patch Patch291: libvirt-cputest-Add-data-for-Intel-R-Xeon-R-Platinum-8268-CPU.patch Patch292: libvirt-cpu_map-Add-Cascadelake-Server-CPU-model.patch Patch293: libvirt-cpu_x86-Introduce-virCPUx86DataItem-container-struct.patch Patch294: libvirt-cpu_x86-Rename-virCPUx86Vendor.cpuid.patch Patch295: libvirt-cpu_x86-Rename-virCPUx86DataItem-variables.patch Patch296: libvirt-cpu_x86-Rename-x86DataCpuidNext-function.patch Patch297: libvirt-cpu_x86-Rename-x86DataCpuid.patch Patch298: libvirt-cpu_x86-Rename-virCPUx86CPUIDSorter.patch Patch299: libvirt-cpu_x86-Rename-virCPUx86DataAddCPUIDInt.patch Patch300: libvirt-cpu_x86-Rename-virCPUx86DataAddCPUID.patch Patch301: libvirt-cpu_x86-Rename-virCPUx86VendorToCPUID.patch Patch302: libvirt-cpu_x86-Simplify-x86DataAdd.patch Patch303: libvirt-cpu_x86-Introduce-virCPUx86DataCmp.patch Patch304: libvirt-cpu_x86-Make-x86cpuidSetBits-more-general.patch Patch305: libvirt-cpu_x86-Make-x86cpuidClearBits-more-general.patch Patch306: libvirt-cpu_x86-Make-x86cpuidAndBits-more-general.patch Patch307: libvirt-cpu_x86-Make-x86cpuidMatchMasked-more-general.patch Patch308: libvirt-cpu_x86-Make-x86cpuidMatch-more-general.patch Patch309: libvirt-cpu_x86-Store-virCPUx86DataItem-content-in-union.patch Patch310: libvirt-cpu_x86-Add-support-for-storing-MSR-features-in-CPU-map.patch Patch311: libvirt-cpu_x86-Move-CheckFeature-functions.patch Patch312: libvirt-cputest-Add-support-for-MSR-features-to-cpu-parse.sh.patch Patch313: libvirt-util-file-introduce-VIR_AUTOCLOSE-macro-to-close-fd-of-the-file-automatically.patch Patch314: libvirt-vircpuhost-Add-support-for-reading-MSRs.patch Patch315: libvirt-virhostcpu-Make-virHostCPUGetMSR-work-only-on-x86.patch Patch316: libvirt-cpu_x86-Fix-placement-of-CheckFeature-functions.patch Patch317: libvirt-cpu_conf-Introduce-virCPUDefFilterFeatures.patch Patch318: libvirt-qemu_command-Use-consistent-syntax-for-CPU-features.patch Patch319: libvirt-tests-Add-QEMU-caps-data-for-future-4.1.0.patch Patch320: libvirt-tests-Add-domain-capabilities-case-for-QEMU-4.1.0.patch Patch321: libvirt-qemuxml2argvtest-Add-test-for-CPU-features-translation.patch Patch322: libvirt-qemu-Add-APIs-for-translating-CPU-features.patch Patch323: libvirt-qemu-Probe-for-max-x86_64-cpu-type.patch Patch324: libvirt-qemu-Probe-for-unavailable-features-CPU-property.patch Patch325: libvirt-qemu-Probe-host-CPU-after-capabilities.patch Patch326: libvirt-qemu_command-Use-canonical-names-of-CPU-features.patch Patch327: libvirt-qemu-Translate-feature-names-from-query-cpu-model-expansion.patch Patch328: libvirt-qemu-Don-t-use-full-CPU-model-expansion.patch Patch329: libvirt-qemu-Make-qemuMonitorGetGuestCPU-usable-on-x86-only.patch Patch330: libvirt-cpu-Introduce-virCPUDataAddFeature.patch Patch331: libvirt-qemu-Add-type-filter-to-qemuMonitorJSONParsePropsList.patch Patch332: libvirt-util-string-Introduce-macro-for-automatic-string-lists.patch Patch333: libvirt-util-json-define-cleanup-function-using-VIR_DEFINE_AUTOPTR_FUNC.patch Patch334: libvirt-qemu-Introduce-generic-qemuMonitorGetGuestCPU.patch Patch335: libvirt-qemu_process-Prefer-generic-qemuMonitorGetGuestCPU.patch Patch336: libvirt-util-Rework-virStringListAdd.patch Patch337: libvirt-conf-Introduce-virCPUDefCheckFeatures.patch Patch338: libvirt-cpu_x86-Turn-virCPUx86DataIteratorInit-into-a-function.patch Patch339: libvirt-cpu_x86-Introduce-virCPUx86FeatureFilter-MSR.patch Patch340: libvirt-cpu_x86-Read-CPU-features-from-IA32_ARCH_CAPABILITIES-MSR.patch Patch341: libvirt-cpu_map-Introduce-IA32_ARCH_CAPABILITIES-MSR-features.patch Patch342: libvirt-qemu-Forbid-MSR-features-with-old-QEMU.patch Patch343: libvirt-qemu-Drop-MSR-features-from-host-model-with-old-QEMU.patch Patch344: libvirt-cpu_x86-Fix-memory-leak-virCPUx86GetHost.patch Patch345: libvirt-qemu-Use-tmpChr-in-qemuDomainDetachChrDevice-to-build-device-string.patch Patch346: libvirt-qemu-Drop-user-prefix-for-guestfwd-netdev.patch Patch347: libvirt-qemu_hotplug-Attach-guestfwd-using-netdev_add.patch Patch348: libvirt-qemu_hotplug-Detach-guestfwd-using-netdev_del.patch Patch349: libvirt-qemuhotplugtest-Test-guestfwd-attach-and-detach.patch Patch350: libvirt-daemon-Register-secret-driver-before-storage-driver.patch Patch351: libvirt-bhyve-Move-autostarting-of-domains-into-bhyveStateInitialize.patch Patch352: libvirt-Revert-virStateDriver-Separate-AutoStart-from-Initialize.patch Patch353: libvirt-Revert-Separate-out-StateAutoStart-from-StateInitialize.patch Patch354: libvirt-util-moving-type-argument-to-avoid-issues-with-mount-syscall.patch Patch355: libvirt-util-cgroup-use-VIR_AUTOFREE-instead-of-VIR_FREE-for-scalar-types.patch Patch356: libvirt-vircgroup-Rename-structs-to-start-with-underscore.patch Patch357: libvirt-vircgroup-Introduce-standard-set-of-typedefs-and-use-them.patch Patch358: libvirt-vircgroup-Extract-file-link-resolving-into-separate-function.patch Patch359: libvirt-vircgroup-Remove-unused-function-virCgroupKill.patch Patch360: libvirt-vircgroup-Unexport-unused-function-virCgroupAddTaskController.patch Patch361: libvirt-vircgroup-Unexport-unused-function-virCgroupRemoveRecursively.patch Patch362: libvirt-vircgroup-Move-function-used-in-tests-into-vircgrouppriv.h.patch Patch363: libvirt-vircgroup-Remove-pointless-bool-parameter.patch Patch364: libvirt-vircgroup-Extract-mount-options-matching-into-function.patch Patch365: libvirt-vircgroup-Use-virCgroupMountOptsMatchController-in-virCgroupDetectPlacement.patch Patch366: libvirt-vircgroup-Introduce-virCgroupEnableMissingControllers.patch Patch367: libvirt-vircgroup-machinename-will-never-be-NULL.patch Patch368: libvirt-vircgroup-Remove-virCgroupAddTaskController.patch Patch369: libvirt-vircgroup-Introduce-virCgroupGetMemoryStat.patch Patch370: libvirt-lxc-Use-virCgroupGetMemoryStat.patch Patch371: libvirt-vircgroup-fix-MinGW-build.patch Patch372: libvirt-vircgroup-Duplicate-string-before-modifying.patch Patch373: libvirt-vircgroup-Extract-controller-detection-into-function.patch Patch374: libvirt-vircgroup-Extract-placement-validation-into-function.patch Patch375: libvirt-vircgroup-Split-virCgroupPathOfController-into-two-functions.patch Patch376: libvirt-vircgroup-Call-virCgroupRemove-inside-virCgroupMakeGroup.patch Patch377: libvirt-vircgroup-Simplify-if-conditions-in-virCgroupMakeGroup.patch Patch378: libvirt-vircgroup-Remove-obsolete-sa_assert.patch Patch379: libvirt-tests-Resolve-possible-overrun.patch Patch380: libvirt-vircgroup-cleanup-controllers-not-managed-by-systemd-on-error.patch Patch381: libvirt-vircgroup-fix-bug-in-virCgroupEnableMissingControllers.patch Patch382: libvirt-vircgroup-rename-virCgroupAdd.-Task-to-virCgroupAdd.-Process.patch Patch383: libvirt-vircgroup-introduce-virCgroupTaskFlags.patch Patch384: libvirt-vircgroup-introduce-virCgroupAddThread.patch Patch385: libvirt-vircgroupmock-cleanup-unused-cgroup-files.patch Patch386: libvirt-vircgroupmock-rewrite-cgroup-fopen-mocking.patch Patch387: libvirt-vircgrouptest-call-virCgroupDetectMounts-directly.patch Patch388: libvirt-vircgrouptest-call-virCgroupNewSelf-instead-virCgroupDetectMounts.patch Patch389: libvirt-util-introduce-vircgroupbackend-files.patch Patch390: libvirt-vircgroup-introduce-cgroup-v1-backend-files.patch Patch391: libvirt-vircgroup-extract-virCgroupV1Available.patch Patch392: libvirt-vircgroup-detect-available-backend-for-cgroup.patch Patch393: libvirt-vircgroup-extract-virCgroupV1ValidateMachineGroup.patch Patch394: libvirt-vircgroup-extract-virCgroupV1CopyMounts.patch Patch395: libvirt-vircgroup-extract-v1-detect-functions.patch Patch396: libvirt-vircgroup-extract-virCgroupV1CopyPlacement.patch Patch397: libvirt-vircgroup-extract-virCgroupV1ValidatePlacement.patch Patch398: libvirt-vircgroup-extract-virCgroupV1StealPlacement.patch Patch399: libvirt-vircgroup-extract-virCgroupV1DetectControllers.patch Patch400: libvirt-vircgroup-extract-virCgroupV1HasController.patch Patch401: libvirt-vircgroup-extract-virCgroupV1GetAnyController.patch Patch402: libvirt-vircgroup-extract-virCgroupV1PathOfController.patch Patch403: libvirt-vircgroup-extract-virCgroupV1MakeGroup.patch Patch404: libvirt-vircgroup-extract-virCgroupV1Remove.patch Patch405: libvirt-vircgroup-extract-virCgroupV1AddTask.patch Patch406: libvirt-vircgroup-extract-virCgroupV1HasEmptyTasks.patch Patch407: libvirt-vircgroup-extract-virCgroupV1BindMount.patch Patch408: libvirt-vircgroup-extract-virCgroupV1SetOwner.patch Patch409: libvirt-vircgroup-extract-virCgroupV1-Set-Get-BlkioWeight.patch Patch410: libvirt-vircgroup-extract-virCgroupV1GetBlkioIoServiced.patch Patch411: libvirt-vircgroup-extract-virCgroupV1GetBlkioIoDeviceServiced.patch Patch412: libvirt-vircgroup-extract-virCgroupV1-Set-Get-BlkioDeviceWeight.patch Patch413: libvirt-vircgroup-extract-virCgroupV1-Set-Get-BlkioDeviceReadIops.patch Patch414: libvirt-vircgroup-extract-virCgroupV1-Set-Get-BlkioDeviceWriteIops.patch Patch415: libvirt-vircgroup-extract-virCgroupV1-Set-Get-BlkioDeviceReadBps.patch Patch416: libvirt-vircgroup-extract-virCgroupV1-Set-Get-BlkioDeviceWriteBps.patch Patch417: libvirt-vircgroup-extract-virCgroupV1SetMemory.patch Patch418: libvirt-vircgroup-extract-virCgroupV1GetMemoryStat.patch Patch419: libvirt-vircgroup-extract-virCgroupV1GetMemoryUsage.patch Patch420: libvirt-vircgroup-extract-virCgroupV1-Set-Get-Memory-Limit.patch Patch421: libvirt-vircgroup-extract-virCgroupV1GetMemSwapUsage.patch Patch422: libvirt-vircgroup-extract-virCgroupV1-Allow-Deny-Device.patch Patch423: libvirt-vircgroup-extract-virCgroupV1-Allow-Deny-AllDevices.patch Patch424: libvirt-vircgroup-extract-virCgroupV1-Set-Get-CpuShares.patch Patch425: libvirt-vircgroup-extract-virCgroupV1-Set-Get-CpuCfsPeriod.patch Patch426: libvirt-vircgroup-extract-virCgroupV1-Set-Get-CpuCfsQuota.patch Patch427: libvirt-vircgroup-extract-virCgroupV1SupportsCpuBW.patch Patch428: libvirt-vircgroup-extract-virCgroupV1GetCpuacct-Usage.patch Patch429: libvirt-vircgroup-extract-virCgroupV1GetCpuacctStat.patch Patch430: libvirt-vircgroup-extract-virCgroupV1-Set-Get-FreezerState.patch Patch431: libvirt-vircgroup-extract-virCgroupV1-Set-Get-CpusetMems.patch Patch432: libvirt-vircgroup-extract-virCgroupV1-Set-Get-CpusetMemoryMigrate.patch Patch433: libvirt-vircgroup-extract-virCgroupV1-Set-Get-CpusetCpus.patch Patch434: libvirt-vircgroup-rename-virCgroupController-into-virCgroupV1Controller.patch Patch435: libvirt-vircgroup-rename-controllers-to-legacy.patch Patch436: libvirt-vircgroup-remove-VIR_CGROUP_SUPPORTED.patch Patch437: libvirt-vircgroup-include-system-headers-only-on-linux.patch Patch438: libvirt-vircgroupv1-fix-build-on-non-linux-OSes.patch Patch439: libvirt-Revert-vircgroup-cleanup-controllers-not-managed-by-systemd-on-error.patch Patch440: libvirt-util-introduce-cgroup-v2-files.patch Patch441: libvirt-vircgroup-introduce-virCgroupV2Available.patch Patch442: libvirt-vircgroup-introduce-virCgroupV2ValidateMachineGroup.patch Patch443: libvirt-vircgroup-introduce-virCgroupV2CopyMounts.patch Patch444: libvirt-vircgroup-introduce-virCgroupV2CopyPlacement.patch Patch445: libvirt-vircgroup-introduce-virCgroupV2DetectMounts.patch Patch446: libvirt-vircgroup-introduce-virCgroupV2DetectPlacement.patch Patch447: libvirt-vircgroup-introduce-virCgroupV2ValidatePlacement.patch Patch448: libvirt-vircgroup-introduce-virCgroupV2StealPlacement.patch Patch449: libvirt-vircgroup-introduce-virCgroupV2DetectControllers.patch Patch450: libvirt-vircgroup-introduce-virCgroupV2HasController.patch Patch451: libvirt-vircgroup-introduce-virCgroupV2GetAnyController.patch Patch452: libvirt-vircgroup-introduce-virCgroupV2PathOfController.patch Patch453: libvirt-vircgroup-introduce-virCgroupV2MakeGroup.patch Patch454: libvirt-vircgroup-introduce-virCgroupV2Remove.patch Patch455: libvirt-vircgroup-introduce-virCgroupV2AddTask.patch Patch456: libvirt-vircgroup-introduce-virCgroupV2HasEmptyTasks.patch Patch457: libvirt-vircgroup-introduce-virCgroupV2BindMount.patch Patch458: libvirt-vircgroup-introduce-virCgroupV2SetOwner.patch Patch459: libvirt-vircgroup-introduce-virCgroupV2-Set-Get-BlkioWeight.patch Patch460: libvirt-vircgroup-introduce-virCgroupV2GetBlkioIoServiced.patch Patch461: libvirt-vircgroup-introduce-virCgroupV2GetBlkioIoDeviceServiced.patch Patch462: libvirt-vircgroup-introduce-virCgroupV2-Set-Get-BlkioDeviceWeight.patch Patch463: libvirt-vircgroup-introduce-virCgroupV2-Set-Get-BlkioDeviceReadIops.patch Patch464: libvirt-vircgroup-introduce-virCgroupV2-Set-Get-BlkioDeviceWriteIops.patch Patch465: libvirt-vircgroup-introduce-virCgroupV2-Set-Get-BlkioDeviceReadBps.patch Patch466: libvirt-vircgroup-introduce-virCgroupV2-Set-Get-BlkioDeviceWriteBps.patch Patch467: libvirt-vircgroup-introduce-virCgroupV2SetMemory.patch Patch468: libvirt-vircgroup-introduce-virCgroupV2GetMemoryStat.patch Patch469: libvirt-vircgroup-introduce-virCgroupV2GetMemoryUsage.patch Patch470: libvirt-vircgroup-introduce-virCgroupV2-Set-Get-MemoryHardLimit.patch Patch471: libvirt-vircgroup-introduce-virCgroupV2-Set-Get-MemorySoftLimit.patch Patch472: libvirt-vircgroup-introduce-virCgroupV2-Set-Get-MemSwapHardLimit.patch Patch473: libvirt-vircgroup-introduce-virCgroupV2GetMemSwapUsage.patch Patch474: libvirt-vircgroup-introduce-virCgroupV2-Set-Get-CpuShares.patch Patch475: libvirt-vircgroup-introduce-virCgroupV2-Set-Get-CpuCfsPeriod.patch Patch476: libvirt-vircgroup-introduce-virCgroupV2-Set-Get-CpuCfsQuota.patch Patch477: libvirt-vircgroup-introduce-virCgroupV2SupportsCpuBW.patch Patch478: libvirt-vircgroup-introduce-virCgroupV2GetCpuacctUsage.patch Patch479: libvirt-vircgroup-introduce-virCgroupV2GetCpuacctStat.patch Patch480: libvirt-vircgroup-register-cgroup-v2-backend.patch Patch481: libvirt-vircgroup-add-support-for-hybrid-configuration.patch Patch482: libvirt-vircgroupmock-change-cgroup-prefix.patch Patch483: libvirt-vircgroupmock-add-support-to-test-cgroup-v2.patch Patch484: libvirt-vircgrouptest-introduce-initFakeFS-and-cleanupFakeFS-helpers.patch Patch485: libvirt-vircgrouptest-prepare-testCgroupDetectMounts-for-cgroup-v2.patch Patch486: libvirt-vircgrouptest-add-detect-mounts-test-for-cgroup-v2.patch Patch487: libvirt-vircgrouptest-add-detect-mounts-test-for-hybrid-cgroups.patch Patch488: libvirt-vircgrouptest-prepare-validateCgroup-for-cgroupv2.patch Patch489: libvirt-vircgrouptest-add-cgroup-v2-tests.patch Patch490: libvirt-vircgrouptest-add-hybrid-tests.patch Patch491: libvirt-virt-host-validate-rewrite-cgroup-detection-to-use-util-vircgroup.patch Patch492: libvirt-virt-host-validate-require-freezer-for-LXC.patch Patch493: libvirt-virt-host-validate-Fix-build-on-non-Linux.patch Patch494: libvirt-tests-Use-correct-function-name-in-error-path.patch Patch495: libvirt-util-Fix-virCgroupGetMemoryStat.patch Patch496: libvirt-tests-Augment-vcgrouptest-to-add-virCgroupGetMemoryStat.patch Patch497: libvirt-vircgroup-introduce-virCgroupKillRecursiveCB.patch Patch498: libvirt-vircgroupv2-fix-virCgroupV2ValidateMachineGroup.patch Patch499: libvirt-util-implement-virCgroupV2-Set-Get-CpusetMems.patch Patch500: libvirt-util-implement-virCgroupV2-Set-Get-CpusetMemoryMigrate.patch Patch501: libvirt-util-implement-virCgroupV2-Set-Get-CpusetCpus.patch Patch502: libvirt-util-enable-cgroups-v2-cpuset-controller-for-threads.patch Patch503: libvirt-util-vircgroup-pass-parent-cgroup-into-virCgroupDetectControllersCB.patch Patch504: libvirt-internal-introduce-a-family-of-NULLSTR-macros.patch Patch505: libvirt-util-vircgroup-improve-controller-detection.patch Patch506: libvirt-util-vircgroupv2-use-any-controller-to-create-thread-directory.patch Patch507: libvirt-util-vircgroupv2-enable-CPU-controller-only-if-it-s-available.patch Patch508: libvirt-util-vircgroupv2-separate-return-values-of-virCgroupV2EnableController.patch Patch509: libvirt-util-vircgroupv2-don-t-error-out-if-enabling-controller-fails.patch Patch510: libvirt-util-vircgroupv2-mark-only-requested-controllers-as-available.patch Patch511: libvirt-Revert-util-vircgroup-pass-parent-cgroup-into-virCgroupDetectControllersCB.patch Patch512: libvirt-util-vircgroupv2-stop-enabling-missing-controllers-with-systemd.patch Patch513: libvirt-virWaitForDevices-Drop-confusing-part-of-comment.patch Patch514: libvirt-lib-Drop-UDEVSETTLE.patch Patch515: libvirt-m4-Provide-default-value-fore-UDEVADM.patch Patch516: libvirt-m4-Drop-needless-string-checks.patch Patch517: libvirt-util-vircgroup-introduce-virCgroup-Get-Set-ValueRaw.patch Patch518: libvirt-util-vircgroup-move-virCgroupGetValueStr-out-of-virCgroupGetValueForBlkDev.patch Patch519: libvirt-util-vircgroupv1-add-support-for-BFQ-blkio-files.patch Patch520: libvirt-util-vircgroupv2-add-support-for-BFQ-files.patch Patch521: libvirt-Handle-copying-bitmaps-to-larger-data-buffers.patch Patch522: libvirt-virDomainObjListAddLocked-fix-double-free.patch Patch523: libvirt-docs-schemas-Decouple-the-virtio-options-from-each-other.patch Patch524: libvirt-util-command-use-VIR_AUTOFREE-instead-of-VIR_FREE-for-scalar-types.patch Patch525: libvirt-util-command-define-cleanup-function-using-VIR_DEFINE_AUTOPTR_FUNC.patch Patch526: libvirt-util-netdevopenvswitch-use-VIR_AUTOFREE-instead-of-VIR_FREE-for-scalar-types.patch Patch527: libvirt-util-virnetdevopenvswitch-Drop-an-unused-variable-ovs_timeout.patch Patch528: libvirt-util-netdevopenvswitch-use-VIR_AUTOPTR-for-aggregate-types.patch Patch529: libvirt-util-suppress-unimportant-ovs-vsctl-errors-when-getting-interface-stats.patch Patch530: libvirt-virNetDevOpenvswitchInterfaceStats-Optimize-for-speed.patch Patch531: libvirt-test-Introduce-virnetdevopenvswitchtest.patch Patch532: libvirt-vircommand-Separate-mass-FD-closing-into-a-function.patch Patch533: libvirt-virCommand-use-procfs-to-learn-opened-FDs.patch Patch534: libvirt-util-command-Ignore-bitmap-errors-when-enumerating-file-descriptors-to-close.patch Patch535: libvirt-util-Avoid-possible-error-in-virCommandMassClose.patch Patch536: libvirt-vircgroup-fix-cgroups-v2-controllers-detection.patch Patch537: libvirt-vircgroupv2-store-enabled-controllers.patch Patch538: libvirt-virDomainObjListAddLocked-Produce-better-error-message-than-Duplicate-key.patch Patch539: libvirt-virdbus-Grab-a-ref-as-long-as-the-while-loop-is-executed.patch Patch540: libvirt-vircgroupv2-fix-parsing-multiple-values-in-single-file.patch Patch541: libvirt-vircgroupv2-fix-virCgroupV2GetCpuCfsQuota-for-max-value.patch Patch542: libvirt-vircgroupv2-fix-abort-in-VIR_AUTOFREE.patch Patch543: libvirt-vircgroupv2-fix-setting-cpu.max-period.patch Patch544: libvirt-cpu_conf-Pass-policy-to-CPU-feature-filtering-callbacks.patch Patch545: libvirt-qemuxml2-test-Add-tests-for-Icelake-Server-pconfig.patch Patch546: libvirt-qemu-Drop-disabled-CPU-features-unknown-to-QEMU.patch Patch547: libvirt-cputest-Add-data-for-Ice-Lake-Server-CPU.patch Patch548: libvirt-cpu_map-Drop-pconfig-from-Icelake-Server-CPU-model.patch Patch549: libvirt-qemu-Fix-NULL-ptr-dereference-caused-by-qemuDomainDefFormatBufInternal.patch Patch550: libvirt-cpu_map-Add-TAA_NO-bit-for-IA32_ARCH_CAPABILITIES-MSR.patch Patch551: libvirt-cpu_map-Add-TSX_CTRL-bit-for-IA32_ARCH_CAPABILITIES-MSR.patch Requires: libvirt-daemon = %{version}-%{release} Requires: libvirt-daemon-config-network = %{version}-%{release} Requires: libvirt-daemon-config-nwfilter = %{version}-%{release} %if %{with_libxl} Requires: libvirt-daemon-driver-libxl = %{version}-%{release} %endif %if %{with_lxc} Requires: libvirt-daemon-driver-lxc = %{version}-%{release} %endif %if %{with_qemu} Requires: libvirt-daemon-driver-qemu = %{version}-%{release} %endif %if %{with_uml} Requires: libvirt-daemon-driver-uml = %{version}-%{release} %endif %if %{with_vbox} Requires: libvirt-daemon-driver-vbox = %{version}-%{release} %endif Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release} Requires: libvirt-daemon-driver-interface = %{version}-%{release} Requires: libvirt-daemon-driver-secret = %{version}-%{release} Requires: libvirt-daemon-driver-storage = %{version}-%{release} Requires: libvirt-daemon-driver-network = %{version}-%{release} Requires: libvirt-daemon-driver-nodedev = %{version}-%{release} Requires: libvirt-client = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} # All build-time requirements. Run-time requirements are # listed against each sub-RPM %if 0%{?enable_autotools} BuildRequires: autoconf BuildRequires: automake BuildRequires: gettext-devel BuildRequires: libtool BuildRequires: /usr/bin/pod2man %endif BuildRequires: gcc BuildRequires: git %if 0%{?fedora} >= 27 || 0%{?rhel} > 7 BuildRequires: perl-interpreter %else BuildRequires: perl %endif BuildRequires: %{python} %if %{with_systemd} BuildRequires: systemd-units %endif %if %{with_libxl} BuildRequires: xen-devel %endif BuildRequires: libxml2-devel BuildRequires: libxslt BuildRequires: readline-devel %if %{with_bash_completion} BuildRequires: bash-completion >= 2.0 %endif BuildRequires: ncurses-devel BuildRequires: gettext BuildRequires: libtasn1-devel %if (0%{?rhel} && 0%{?rhel} < 7) BuildRequires: libgcrypt-devel %endif BuildRequires: gnutls-devel BuildRequires: libattr-devel # For pool-build probing for existing pools BuildRequires: libblkid-devel >= 2.17 # for augparse, optionally used in testing BuildRequires: augeas %if 0%{?fedora} || 0%{?rhel} >= 7 BuildRequires: systemd-devel >= 185 %else BuildRequires: libudev-devel >= 145 %endif BuildRequires: libpciaccess-devel >= 0.10.9 BuildRequires: yajl-devel %if %{with_sanlock} BuildRequires: sanlock-devel >= 2.4 %endif BuildRequires: libpcap-devel %if 0%{?rhel} && 0%{?rhel} < 7 BuildRequires: libnl-devel %else BuildRequires: libnl3-devel %endif BuildRequires: avahi-devel BuildRequires: libselinux-devel BuildRequires: dnsmasq >= 2.41 BuildRequires: iptables %if 0%{?rhel} && 0%{?rhel} < 7 BuildRequires: iptables-ipv6 %endif BuildRequires: radvd BuildRequires: ebtables BuildRequires: module-init-tools BuildRequires: cyrus-sasl-devel %if 0%{?fedora} || 0%{?rhel} >= 7 BuildRequires: polkit >= 0.112 %else BuildRequires: polkit >= 0.93 %endif # For mount/umount in FS driver BuildRequires: util-linux %if %{with_qemu} # For managing ACLs BuildRequires: libacl-devel # From QEMU RPMs BuildRequires: /usr/bin/qemu-img %endif # For LVM drivers BuildRequires: lvm2 # For ISCSI driver BuildRequires: iscsi-initiator-utils # For disk driver BuildRequires: parted-devel # For Multipath support BuildRequires: device-mapper-devel %if %{with_storage_rbd} %if 0%{?fedora} || 0%{?rhel} >= 7 BuildRequires: librados2-devel BuildRequires: librbd1-devel %else BuildRequires: ceph-devel %endif %endif %if %{with_storage_gluster} BuildRequires: glusterfs-api-devel >= 3.4.1 BuildRequires: glusterfs-devel >= 3.4.1 %endif %if %{with_storage_sheepdog} BuildRequires: sheepdog %endif %if %{with_storage_zfs} # Support any conforming implementation of zfs. On stock Fedora # this is zfs-fuse, but could be zfsonlinux upstream RPMs BuildRequires: /sbin/zfs BuildRequires: /sbin/zpool %endif %if %{with_numactl} # For QEMU/LXC numa info BuildRequires: numactl-devel %endif BuildRequires: libcap-ng-devel >= 0.5.0 %if %{with_fuse} BuildRequires: fuse-devel >= 2.8.6 %endif %if %{with_phyp} || %{with_libssh2} BuildRequires: libssh2-devel >= 1.3.0 %endif %if 0%{?fedora} || 0%{?rhel} >= 7 BuildRequires: netcf-devel >= 0.2.2 %else BuildRequires: netcf-devel >= 0.1.8 %endif %if %{with_esx} BuildRequires: libcurl-devel %endif %if %{with_hyperv} BuildRequires: libwsman-devel >= 2.2.3 %endif BuildRequires: audit-libs-devel # we need /usr/sbin/dtrace BuildRequires: systemtap-sdt-devel # For mount/umount in FS driver BuildRequires: util-linux # For showmount in FS driver (netfs discovery) BuildRequires: nfs-utils # Communication with the firewall and polkit daemons use DBus BuildRequires: dbus-devel # Fedora build root suckage BuildRequires: gawk # For storage wiping with different algorithms BuildRequires: scrub %if %{with_numad} BuildRequires: numad %endif %if %{with_wireshark} BuildRequires: wireshark-devel >= 2.1.0 %endif %if %{with_libssh} BuildRequires: libssh-devel >= 0.7.0 %endif %if 0%{?fedora} > 27 || 0%{?rhel} > 7 BuildRequires: rpcgen BuildRequires: libtirpc-devel %endif %if %{with_firewalld_zone} BuildRequires: firewalld-filesystem %endif Provides: bundled(gnulib) %description Libvirt is a C toolkit to interact with the virtualization capabilities of recent versions of Linux (and other OSes). The main package includes the libvirtd server exporting the virtualization support. %package docs Summary: API reference and website documentation %description docs Includes the API reference for the libvirt C library, and a complete copy of the libvirt.org website documentation. %package daemon Summary: Server side daemon and supporting files for libvirt library # All runtime requirements for the libvirt package (runtime requrements # for subpackages are listed later in those subpackages) # The client side, i.e. shared libs are in a subpackage Requires: %{name}-libs = %{version}-%{release} # for modprobe of pci devices Requires: module-init-tools # for /sbin/ip & /sbin/tc Requires: iproute # tc is provided by iproute-tc since at least Fedora 26 %if 0%{?fedora} || 0%{?rhel} > 7 Requires: iproute-tc %endif Requires: avahi-libs %if 0%{?fedora} || 0%{?rhel} >= 7 Requires: polkit >= 0.112 %else Requires: polkit >= 0.93 %endif %ifarch %{ix86} x86_64 ia64 # For virConnectGetSysinfo Requires: dmidecode %endif # For service management %if %{with_systemd} Requires(post): systemd-units Requires(post): systemd-sysv Requires(preun): systemd-units Requires(postun): systemd-units %endif %if %{with_numad} Requires: numad %endif # libvirtd depends on 'messagebus' service Requires: dbus # For uid creation during pre Requires(pre): shadow-utils %description daemon Server side daemon required to manage the virtualization capabilities of recent versions of Linux. Requires a hypervisor specific sub-RPM for specific drivers. %package daemon-config-network Summary: Default configuration files for the libvirtd daemon Requires: libvirt-daemon = %{version}-%{release} Requires: libvirt-daemon-driver-network = %{version}-%{release} %description daemon-config-network Default configuration files for setting up NAT based networking %package daemon-config-nwfilter Summary: Network filter configuration files for the libvirtd daemon Requires: libvirt-daemon = %{version}-%{release} Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release} %description daemon-config-nwfilter Network filter configuration files for cleaning guest traffic %package daemon-driver-network Summary: Network driver plugin for the libvirtd daemon Requires: libvirt-daemon = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} Requires: dnsmasq >= 2.41 Requires: radvd Requires: iptables %if 0%{?rhel} && 0%{?rhel} < 7 Requires: iptables-ipv6 %endif %description daemon-driver-network The network driver plugin for the libvirtd daemon, providing an implementation of the virtual network APIs using the Linux bridge capabilities. %package daemon-driver-nwfilter Summary: Nwfilter driver plugin for the libvirtd daemon Requires: libvirt-daemon = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} Requires: iptables %if 0%{?rhel} && 0%{?rhel} < 7 Requires: iptables-ipv6 %endif Requires: ebtables %description daemon-driver-nwfilter The nwfilter driver plugin for the libvirtd daemon, providing an implementation of the firewall APIs using the ebtables, iptables and ip6tables capabilities %package daemon-driver-nodedev Summary: Nodedev driver plugin for the libvirtd daemon Requires: libvirt-daemon = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} # needed for device enumeration %if 0%{?fedora} || 0%{?rhel} >= 7 Requires: systemd >= 185 %else Requires: udev >= 145 %endif %description daemon-driver-nodedev The nodedev driver plugin for the libvirtd daemon, providing an implementation of the node device APIs using the udev capabilities. %package daemon-driver-interface Summary: Interface driver plugin for the libvirtd daemon Requires: libvirt-daemon = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} %if (0%{?fedora} || 0%{?rhel} >= 7) Requires: netcf-libs >= 0.2.2 %endif %description daemon-driver-interface The interface driver plugin for the libvirtd daemon, providing an implementation of the network interface APIs using the netcf library %package daemon-driver-secret Summary: Secret driver plugin for the libvirtd daemon Requires: libvirt-daemon = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} %description daemon-driver-secret The secret driver plugin for the libvirtd daemon, providing an implementation of the secret key APIs. %package daemon-driver-storage-core Summary: Storage driver plugin including base backends for the libvirtd daemon Requires: libvirt-daemon = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} Requires: nfs-utils # For mkfs Requires: util-linux %if %{with_qemu} # From QEMU RPMs Requires: /usr/bin/qemu-img %endif %description daemon-driver-storage-core The storage driver plugin for the libvirtd daemon, providing an implementation of the storage APIs using files, local disks, LVM, SCSI, iSCSI, and multipath storage. %package daemon-driver-storage-logical Summary: Storage driver plugin for lvm volumes Requires: libvirt-daemon-driver-storage-core = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} Requires: lvm2 %description daemon-driver-storage-logical The storage driver backend adding implementation of the storage APIs for block volumes using lvm. %package daemon-driver-storage-disk Summary: Storage driver plugin for disk Requires: libvirt-daemon-driver-storage-core = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} Requires: parted Requires: device-mapper %description daemon-driver-storage-disk The storage driver backend adding implementation of the storage APIs for block volumes using the host disks. %package daemon-driver-storage-scsi Summary: Storage driver plugin for local scsi devices Requires: libvirt-daemon-driver-storage-core = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} %description daemon-driver-storage-scsi The storage driver backend adding implementation of the storage APIs for scsi host devices. %package daemon-driver-storage-iscsi Summary: Storage driver plugin for iscsi Requires: libvirt-daemon-driver-storage-core = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} Requires: iscsi-initiator-utils %description daemon-driver-storage-iscsi The storage driver backend adding implementation of the storage APIs for iscsi volumes using the host iscsi stack. %package daemon-driver-storage-mpath Summary: Storage driver plugin for multipath volumes Requires: libvirt-daemon-driver-storage-core = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} Requires: device-mapper %description daemon-driver-storage-mpath The storage driver backend adding implementation of the storage APIs for multipath storage using device mapper. %if %{with_storage_gluster} %package daemon-driver-storage-gluster Summary: Storage driver plugin for gluster Requires: libvirt-daemon-driver-storage-core = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} %if 0%{?fedora} Requires: glusterfs-client >= 2.0.1 %endif %if (0%{?fedora} || 0%{?with_storage_gluster}) Requires: /usr/sbin/gluster %endif %description daemon-driver-storage-gluster The storage driver backend adding implementation of the storage APIs for gluster volumes using libgfapi. %endif %if %{with_storage_rbd} %package daemon-driver-storage-rbd Summary: Storage driver plugin for rbd Requires: libvirt-daemon-driver-storage-core = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} %description daemon-driver-storage-rbd The storage driver backend adding implementation of the storage APIs for rbd volumes using the ceph protocol. %endif %if %{with_storage_sheepdog} %package daemon-driver-storage-sheepdog Summary: Storage driver plugin for sheepdog Requires: libvirt-daemon-driver-storage-core = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} Requires: sheepdog %description daemon-driver-storage-sheepdog The storage driver backend adding implementation of the storage APIs for sheepdog volumes using. %endif %if %{with_storage_zfs} %package daemon-driver-storage-zfs Summary: Storage driver plugin for ZFS Requires: libvirt-daemon-driver-storage-core = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} # Support any conforming implementation of zfs Requires: /sbin/zfs Requires: /sbin/zpool %description daemon-driver-storage-zfs The storage driver backend adding implementation of the storage APIs for ZFS volumes. %endif %package daemon-driver-storage Summary: Storage driver plugin including all backends for the libvirtd daemon Requires: libvirt-daemon-driver-storage-core = %{version}-%{release} Requires: libvirt-daemon-driver-storage-disk = %{version}-%{release} Requires: libvirt-daemon-driver-storage-logical = %{version}-%{release} Requires: libvirt-daemon-driver-storage-scsi = %{version}-%{release} Requires: libvirt-daemon-driver-storage-iscsi = %{version}-%{release} Requires: libvirt-daemon-driver-storage-mpath = %{version}-%{release} %if %{with_storage_gluster} Requires: libvirt-daemon-driver-storage-gluster = %{version}-%{release} %endif %if %{with_storage_rbd} Requires: libvirt-daemon-driver-storage-rbd = %{version}-%{release} %endif %if %{with_storage_sheepdog} Requires: libvirt-daemon-driver-storage-sheepdog = %{version}-%{release} %endif %if %{with_storage_zfs} Requires: libvirt-daemon-driver-storage-zfs = %{version}-%{release} %endif %description daemon-driver-storage The storage driver plugin for the libvirtd daemon, providing an implementation of the storage APIs using LVM, iSCSI, parted and more. %if %{with_qemu} %package daemon-driver-qemu Summary: QEMU driver plugin for the libvirtd daemon Requires: libvirt-daemon = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} # There really is a hard cross-driver dependency here Requires: libvirt-daemon-driver-network = %{version}-%{release} Requires: libvirt-daemon-driver-storage-core = %{version}-%{release} Requires: /usr/bin/qemu-img # For image compression Requires: gzip Requires: bzip2 Requires: lzop Requires: xz %if 0%{?fedora} || 0%{?rhel} > 7 Requires: systemd-container %endif %description daemon-driver-qemu The qemu driver plugin for the libvirtd daemon, providing an implementation of the hypervisor driver APIs using QEMU %endif %if %{with_lxc} %package daemon-driver-lxc Summary: LXC driver plugin for the libvirtd daemon Requires: libvirt-daemon = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} # There really is a hard cross-driver dependency here Requires: libvirt-daemon-driver-network = %{version}-%{release} %if 0%{?fedora} || 0%{?rhel} > 7 Requires: systemd-container %endif %description daemon-driver-lxc The LXC driver plugin for the libvirtd daemon, providing an implementation of the hypervisor driver APIs using the Linux kernel %endif %if %{with_uml} %package daemon-driver-uml Summary: Uml driver plugin for the libvirtd daemon Requires: libvirt-daemon = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} %description daemon-driver-uml The UML driver plugin for the libvirtd daemon, providing an implementation of the hypervisor driver APIs using User Mode Linux %endif %if %{with_vbox} %package daemon-driver-vbox Summary: VirtualBox driver plugin for the libvirtd daemon Requires: libvirt-daemon = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} %description daemon-driver-vbox The vbox driver plugin for the libvirtd daemon, providing an implementation of the hypervisor driver APIs using VirtualBox %endif %if %{with_libxl} %package daemon-driver-libxl Summary: Libxl driver plugin for the libvirtd daemon Requires: libvirt-daemon = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} Obsoletes: libvirt-daemon-driver-xen < 4.3.0 %description daemon-driver-libxl The Libxl driver plugin for the libvirtd daemon, providing an implementation of the hypervisor driver APIs using Libxl %endif %if %{with_qemu_tcg} %package daemon-qemu Summary: Server side daemon & driver required to run QEMU guests Requires: libvirt-daemon = %{version}-%{release} Requires: libvirt-daemon-driver-qemu = %{version}-%{release} Requires: libvirt-daemon-driver-interface = %{version}-%{release} Requires: libvirt-daemon-driver-network = %{version}-%{release} Requires: libvirt-daemon-driver-nodedev = %{version}-%{release} Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release} Requires: libvirt-daemon-driver-secret = %{version}-%{release} Requires: libvirt-daemon-driver-storage = %{version}-%{release} Requires: qemu %description daemon-qemu Server side daemon and driver required to manage the virtualization capabilities of the QEMU TCG emulators %endif %if %{with_qemu_kvm} %package daemon-kvm Summary: Server side daemon & driver required to run KVM guests Requires: libvirt-daemon = %{version}-%{release} Requires: libvirt-daemon-driver-qemu = %{version}-%{release} Requires: libvirt-daemon-driver-interface = %{version}-%{release} Requires: libvirt-daemon-driver-network = %{version}-%{release} Requires: libvirt-daemon-driver-nodedev = %{version}-%{release} Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release} Requires: libvirt-daemon-driver-secret = %{version}-%{release} Requires: libvirt-daemon-driver-storage = %{version}-%{release} Requires: qemu-kvm %description daemon-kvm Server side daemon and driver required to manage the virtualization capabilities of the KVM hypervisor %endif %if %{with_lxc} %package daemon-lxc Summary: Server side daemon & driver required to run LXC guests Requires: libvirt-daemon = %{version}-%{release} Requires: libvirt-daemon-driver-lxc = %{version}-%{release} Requires: libvirt-daemon-driver-interface = %{version}-%{release} Requires: libvirt-daemon-driver-network = %{version}-%{release} Requires: libvirt-daemon-driver-nodedev = %{version}-%{release} Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release} Requires: libvirt-daemon-driver-secret = %{version}-%{release} Requires: libvirt-daemon-driver-storage = %{version}-%{release} %description daemon-lxc Server side daemon and driver required to manage the virtualization capabilities of LXC %endif %if %{with_uml} %package daemon-uml Summary: Server side daemon & driver required to run UML guests Requires: libvirt-daemon = %{version}-%{release} Requires: libvirt-daemon-driver-uml = %{version}-%{release} Requires: libvirt-daemon-driver-interface = %{version}-%{release} Requires: libvirt-daemon-driver-network = %{version}-%{release} Requires: libvirt-daemon-driver-nodedev = %{version}-%{release} Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release} Requires: libvirt-daemon-driver-secret = %{version}-%{release} Requires: libvirt-daemon-driver-storage = %{version}-%{release} # There are no UML kernel RPMs in Fedora/RHEL to depend on. %description daemon-uml Server side daemon and driver required to manage the virtualization capabilities of UML %endif %if %{with_libxl} %package daemon-xen Summary: Server side daemon & driver required to run XEN guests Requires: libvirt-daemon = %{version}-%{release} %if %{with_libxl} Requires: libvirt-daemon-driver-libxl = %{version}-%{release} %endif Requires: libvirt-daemon-driver-interface = %{version}-%{release} Requires: libvirt-daemon-driver-network = %{version}-%{release} Requires: libvirt-daemon-driver-nodedev = %{version}-%{release} Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release} Requires: libvirt-daemon-driver-secret = %{version}-%{release} Requires: libvirt-daemon-driver-storage = %{version}-%{release} Requires: xen %description daemon-xen Server side daemon and driver required to manage the virtualization capabilities of XEN %endif %if %{with_vbox} %package daemon-vbox Summary: Server side daemon & driver required to run VirtualBox guests Requires: libvirt-daemon = %{version}-%{release} Requires: libvirt-daemon-driver-vbox = %{version}-%{release} Requires: libvirt-daemon-driver-interface = %{version}-%{release} Requires: libvirt-daemon-driver-network = %{version}-%{release} Requires: libvirt-daemon-driver-nodedev = %{version}-%{release} Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release} Requires: libvirt-daemon-driver-secret = %{version}-%{release} Requires: libvirt-daemon-driver-storage = %{version}-%{release} %description daemon-vbox Server side daemon and driver required to manage the virtualization capabilities of VirtualBox %endif %package client Summary: Client side utilities of the libvirt library Requires: %{name}-libs = %{version}-%{release} Requires: readline Requires: ncurses # Needed by /usr/libexec/libvirt-guests.sh script. Requires: gettext # Needed by virt-pki-validate script. Requires: gnutls-utils %if %{with_pm_utils} # Needed for probing the power management features of the host. Requires: pm-utils %endif %if %{with_bash_completion} Requires: %{name}-bash-completion = %{version}-%{release} %endif %description client The client binaries needed to access the virtualization capabilities of recent versions of Linux (and other OSes). %package libs Summary: Client side libraries # So remote clients can access libvirt over SSH tunnel # (client invokes 'nc' against the UNIX socket on the server) Requires: nc Requires: cyrus-sasl # Needed by default sasl.conf - no onerous extra deps, since # 100's of other things on a system already pull in krb5-libs Requires: cyrus-sasl-gssapi %description libs Shared libraries for accessing the libvirt daemon. %package admin Summary: Set of tools to control libvirt daemon Requires: %{name}-libs = %{version}-%{release} Requires: readline %if %{with_bash_completion} Requires: %{name}-bash-completion = %{version}-%{release} %endif %description admin The client side utilities to control the libvirt daemon. %if %{with_bash_completion} %package bash-completion Summary: Bash completion script %description bash-completion Bash completion script stub. %endif %if %{with_wireshark} %package wireshark Summary: Wireshark dissector plugin for libvirt RPC transactions Requires: wireshark >= 1.12.6-4 Requires: %{name}-libs = %{version}-%{release} %description wireshark Wireshark dissector plugin for better analysis of libvirt RPC traffic. %endif %if %{with_lxc} %package login-shell Summary: Login shell for connecting users to an LXC container Requires: %{name}-libs = %{version}-%{release} %description login-shell Provides the set-uid virt-login-shell binary that is used to connect a user to an LXC container when they login, by switching namespaces. %endif %package devel Summary: Libraries, includes, etc. to compile with the libvirt library Requires: %{name}-libs = %{version}-%{release} Requires: pkgconfig %description devel Include header files & development libraries for the libvirt C library. %if %{with_sanlock} %package lock-sanlock Summary: Sanlock lock manager plugin for QEMU driver Requires: sanlock >= 2.4 #for virt-sanlock-cleanup require augeas Requires: augeas Requires: %{name}-daemon = %{version}-%{release} Requires: %{name}-libs = %{version}-%{release} %description lock-sanlock Includes the Sanlock lock manager plugin for the QEMU driver %endif %package nss Summary: Libvirt plugin for Name Service Switch Requires: libvirt-daemon-driver-network = %{version}-%{release} %description nss Libvirt plugin for NSS for translating domain names into IP addresses. %prep %setup -q # "make dist" replaces all symlinks with a copy of the linked files; # we need to replace all of them with the original symlinks echo "Restoring symlinks" while read lnk target; do if [ -e $lnk ]; then rm -rf $lnk ln -s $target $lnk fi done <%{_sourcedir}/symlinks || exit 1 # Patches have to be stored in a temporary file because RPM has # a limit on the length of the result of any macro expansion; # if the string is longer, it's silently cropped %{lua: tmp = os.tmpname(); f = io.open(tmp, "w+"); count = 0; for i, p in ipairs(patches) do f:write(p.."\n"); count = count + 1; end; f:close(); print("PATCHCOUNT="..count.."\n") print("PATCHLIST="..tmp.."\n") } git init -q git config user.name rpm-build git config user.email rpm-build git config gc.auto 0 git add . git commit -q -a --author 'rpm-build ' \ -m '%{name}-%{version} base' COUNT=$(grep '\.patch$' $PATCHLIST | wc -l) if [ $COUNT -ne $PATCHCOUNT ]; then echo "Found $COUNT patches in $PATCHLIST, expected $PATCHCOUNT" exit 1 fi if [ $COUNT -gt 0 ]; then xargs git am <$PATCHLIST || exit 1 fi echo "Applied $COUNT patches" rm -f $PATCHLIST rm -rf .git %build %if ! %{supported_platform} echo "This RPM requires either Fedora >= %{min_fedora} or RHEL >= %{min_rhel}" exit 1 %endif %if %{with_qemu} %define arg_qemu --with-qemu %else %define arg_qemu --without-qemu %endif %if %{with_openvz} %define arg_openvz --with-openvz %else %define arg_openvz --without-openvz %endif %if %{with_lxc} %define arg_lxc --with-lxc %define arg_login_shell --with-login-shell %else %define arg_lxc --without-lxc %define arg_login_shell --without-login-shell %endif %if %{with_vbox} %define arg_vbox --with-vbox %else %define arg_vbox --without-vbox %endif %if %{with_libxl} %define arg_libxl --with-libxl %else %define arg_libxl --without-libxl %endif %if %{with_phyp} %define arg_phyp --with-phyp %else %define arg_phyp --without-phyp %endif %if %{with_esx} %define arg_esx --with-esx %else %define arg_esx --without-esx %endif %if %{with_hyperv} %define arg_hyperv --with-hyperv %else %define arg_hyperv --without-hyperv %endif %if %{with_vmware} %define arg_vmware --with-vmware %else %define arg_vmware --without-vmware %endif %if %{with_uml} %define arg_uml --with-uml %else %define arg_uml --without-uml %endif %if %{with_storage_rbd} %define arg_storage_rbd --with-storage-rbd %else %define arg_storage_rbd --without-storage-rbd %endif %if %{with_storage_sheepdog} %define arg_storage_sheepdog --with-storage-sheepdog %else %define arg_storage_sheepdog --without-storage-sheepdog %endif %if %{with_storage_gluster} %define arg_storage_gluster --with-storage-gluster %else %define arg_storage_gluster --without-storage-gluster %endif %if %{with_storage_zfs} %define arg_storage_zfs --with-storage-zfs %else %define arg_storage_zfs --without-storage-zfs %endif %if %{with_numactl} %define arg_numactl --with-numactl %else %define arg_numactl --without-numactl %endif %if %{with_numad} %define arg_numad --with-numad %else %define arg_numad --without-numad %endif %if %{with_fuse} %define arg_fuse --with-fuse %else %define arg_fuse --without-fuse %endif %if %{with_sanlock} %define arg_sanlock --with-sanlock %else %define arg_sanlock --without-sanlock %endif %if %{with_firewalld} %define arg_firewalld --with-firewalld %else %define arg_firewalld --without-firewalld %endif %if %{with_firewalld_zone} %define arg_firewalld_zone --with-firewalld-zone %else %define arg_firewalld_zone --without-firewalld-zone %endif %if %{with_wireshark} %define arg_wireshark --with-wireshark-dissector %else %define arg_wireshark --without-wireshark-dissector %endif %if %{with_pm_utils} %define arg_pm_utils --with-pm-utils %else %define arg_pm_utils --without-pm-utils %endif %define when %(date +"%%F-%%T") %define where %(hostname) %define who %{?packager}%{!?packager:Unknown} %define arg_packager --with-packager="%{who}, %{when}, %{where}" %define arg_packager_version --with-packager-version="%{release}" %if %{with_systemd} %define arg_init_script --with-init-script=systemd %else %define arg_init_script --with-init-script=redhat %endif %if 0%{?fedora} || 0%{?rhel} >= 7 %define arg_selinux_mount --with-selinux-mount="/sys/fs/selinux" %else %define arg_selinux_mount --with-selinux-mount="/selinux" %endif %if 0%{?fedora} # Nightly firmware repo x86/OVMF LOADERS="/usr/share/edk2.git/ovmf-x64/OVMF_CODE-pure-efi.fd:/usr/share/edk2.git/ovmf-x64/OVMF_VARS-pure-efi.fd" # Nightly firmware repo aarch64/AAVMF LOADERS="$LOADERS:/usr/share/edk2.git/aarch64/QEMU_EFI-pflash.raw:/usr/share/edk2.git/aarch64/vars-template-pflash.raw" # Fedora official x86/OVMF LOADERS="$LOADERS:/usr/share/edk2/ovmf/OVMF_CODE.fd:/usr/share/edk2/ovmf/OVMF_VARS.fd" # Fedora official aarch64/AAVMF LOADERS="$LOADERS:/usr/share/edk2/aarch64/QEMU_EFI-pflash.raw:/usr/share/edk2/aarch64/vars-template-pflash.raw" %define arg_loader_nvram --with-loader-nvram="$LOADERS" %endif # place macros above and build commands below this comment export SOURCE_DATE_EPOCH=$(stat --printf='%Y' %{_specdir}/%{name}.spec) %if 0%{?enable_autotools} autoreconf -if %endif rm -f po/stamp-po %configure %{?arg_qemu} \ %{?arg_openvz} \ %{?arg_lxc} \ %{?arg_vbox} \ %{?arg_libxl} \ --with-sasl \ --with-avahi \ --with-polkit \ --with-libvirtd \ %{?arg_uml} \ %{?arg_phyp} \ %{?arg_esx} \ %{?arg_hyperv} \ %{?arg_vmware} \ --without-xenapi \ --without-vz \ --without-bhyve \ --with-interface \ --with-network \ --with-storage-fs \ --with-storage-lvm \ --with-storage-iscsi \ --with-storage-scsi \ --with-storage-disk \ --with-storage-mpath \ %{?arg_storage_rbd} \ %{?arg_storage_sheepdog} \ %{?arg_storage_gluster} \ %{?arg_storage_zfs} \ --without-storage-vstorage \ %{?arg_numactl} \ %{?arg_numad} \ --with-capng \ %{?arg_fuse} \ --with-netcf \ --with-selinux \ %{?arg_selinux_mount} \ --without-apparmor \ --without-hal \ --with-udev \ --with-yajl \ %{?arg_sanlock} \ --with-libpcap \ --with-macvtap \ --with-audit \ --with-dtrace \ --with-driver-modules \ %{?arg_firewalld} \ %{?arg_firewalld_zone} \ %{?arg_wireshark} \ %{?arg_pm_utils} \ --with-nss-plugin \ %{arg_packager} \ %{arg_packager_version} \ --with-qemu-user=%{qemu_user} \ --with-qemu-group=%{qemu_group} \ --with-tls-priority=%{tls_priority} \ %{?arg_loader_nvram} \ %{?enable_werror} \ --enable-expensive-tests \ %{arg_init_script} \ %{?arg_login_shell} make %{?_smp_mflags} V=1 gzip -9 ChangeLog %install rm -fr %{buildroot} export SOURCE_DATE_EPOCH=$(stat --printf='%Y' %{_specdir}/%{name}.spec) # Avoid using makeinstall macro as it changes prefixes rather than setting # DESTDIR. Newer make_install macro would be better but it's not available # on RHEL 5, thus we need to expand it here. make %{?_smp_mflags} install DESTDIR=%{?buildroot} SYSTEMD_UNIT_DIR=%{_unitdir} V=1 make %{?_smp_mflags} -C examples distclean V=1 rm -f $RPM_BUILD_ROOT%{_libdir}/*.la rm -f $RPM_BUILD_ROOT%{_libdir}/*.a rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/lock-driver/*.la rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/lock-driver/*.a rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/connection-driver/*.la rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/connection-driver/*.a rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/storage-backend/*.la rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/storage-backend/*.a rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/storage-file/*.la rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/storage-file/*.a %if %{with_wireshark} rm -f $RPM_BUILD_ROOT%{wireshark_plugindir}/libvirt.la %endif install -d -m 0755 $RPM_BUILD_ROOT%{_datadir}/lib/libvirt/dnsmasq/ # We don't want to install /etc/libvirt/qemu/networks in the main %files list # because if the admin wants to delete the default network completely, we don't # want to end up re-incarnating it on every RPM upgrade. install -d -m 0755 $RPM_BUILD_ROOT%{_datadir}/libvirt/networks/ cp $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu/networks/default.xml \ $RPM_BUILD_ROOT%{_datadir}/libvirt/networks/default.xml rm -f $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu/networks/default.xml rm -f $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu/networks/autostart/default.xml # nwfilter files are installed in /usr/share/libvirt and copied to /etc in %post # to avoid verification errors on changed files in /etc install -d -m 0755 $RPM_BUILD_ROOT%{_datadir}/libvirt/nwfilter/ cp -a $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/nwfilter/*.xml \ $RPM_BUILD_ROOT%{_datadir}/libvirt/nwfilter/ # libvirt saves these files with mode 600 chmod 600 $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/nwfilter/*.xml # Strip auto-generated UUID - we need it generated per-install sed -i -e "//d" $RPM_BUILD_ROOT%{_datadir}/libvirt/networks/default.xml %if ! %{with_qemu} rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/libvirtd_qemu.aug rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/tests/test_libvirtd_qemu.aug %endif %find_lang %{name} %if ! %{with_sanlock} rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/libvirt_sanlock.aug rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/tests/test_libvirt_sanlock.aug %endif %if ! %{with_lxc} rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/libvirtd_lxc.aug rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/tests/test_libvirtd_lxc.aug %endif %if ! %{with_qemu} rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu.conf rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d/libvirtd.qemu %endif %if ! %{with_lxc} rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/lxc.conf rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d/libvirtd.lxc %endif %if ! %{with_libxl} rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/libxl.conf rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d/libvirtd.libxl rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/libvirtd_libxl.aug rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/tests/test_libvirtd_libxl.aug %endif %if ! %{with_uml} rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d/libvirtd.uml %endif # Copied into libvirt-docs subpackage eventually mv $RPM_BUILD_ROOT%{_datadir}/doc/libvirt-%{version} libvirt-docs %ifarch %{power64} s390x x86_64 ia64 alpha sparc64 mv $RPM_BUILD_ROOT%{_datadir}/systemtap/tapset/libvirt_probes.stp \ $RPM_BUILD_ROOT%{_datadir}/systemtap/tapset/libvirt_probes-64.stp %if %{with_qemu} mv $RPM_BUILD_ROOT%{_datadir}/systemtap/tapset/libvirt_qemu_probes.stp \ $RPM_BUILD_ROOT%{_datadir}/systemtap/tapset/libvirt_qemu_probes-64.stp %endif %endif %check cd tests # These tests don't current work in a mock build root for i in nodeinfotest seclabeltest do rm -f $i printf 'int main(void) { return 0; }' > $i.c printf '#!/bin/sh\nexit 0\n' > $i chmod +x $i done if ! make %{?_smp_mflags} check VIR_TEST_DEBUG=1 then cat test-suite.log || true exit 1 fi %pre daemon # 'libvirt' group is just to allow password-less polkit access to # libvirtd. The uid number is irrelevant, so we use dynamic allocation # described at the above link. getent group libvirt >/dev/null || groupadd -r libvirt exit 0 %post daemon %if %{with_systemd} %if %{with_systemd_macros} %systemd_post virtlockd.socket virtlockd-admin.socket %systemd_post virtlogd.socket virtlogd-admin.socket %systemd_post libvirtd.service %else if [ $1 -eq 1 ] ; then # Initial installation /bin/systemctl enable \ virtlockd.socket \ virtlockd-admin.socket \ virtlogd.socket \ virtlogd-admin.socket \ libvirtd.service >/dev/null 2>&1 || : fi %endif %else /sbin/chkconfig --add libvirtd /sbin/chkconfig --add virtlogd /sbin/chkconfig --add virtlockd %endif # request daemon restart in posttrans mkdir -p %{_localstatedir}/lib/rpm-state/libvirt || : touch %{_localstatedir}/lib/rpm-state/libvirt/restart || : %preun daemon %if %{with_systemd} %if %{with_systemd_macros} %systemd_preun libvirtd.service %systemd_preun virtlogd.socket virtlogd-admin.socket virtlogd.service %systemd_preun virtlockd.socket virtlockd-admin.socket virtlockd.service %else if [ $1 -eq 0 ] ; then # Package removal, not upgrade /bin/systemctl --no-reload disable \ libvirtd.service \ virtlogd.socket \ virtlogd-admin.socket \ virtlogd.service \ virtlockd.socket \ virtlockd-admin.socket \ virtlockd.service > /dev/null 2>&1 || : /bin/systemctl stop \ libvirtd.service \ virtlogd.socket \ virtlogd-admin.socket \ virtlogd.service \ virtlockd.socket \ virtlockd-admin.socket \ virtlockd.service > /dev/null 2>&1 || : fi %endif %else if [ $1 = 0 ]; then /sbin/service libvirtd stop 1>/dev/null 2>&1 /sbin/chkconfig --del libvirtd /sbin/service virtlogd stop 1>/dev/null 2>&1 /sbin/chkconfig --del virtlogd /sbin/service virtlockd stop 1>/dev/null 2>&1 /sbin/chkconfig --del virtlockd fi %endif %postun daemon %if %{with_systemd} /bin/systemctl daemon-reload >/dev/null 2>&1 || : if [ $1 -ge 1 ] ; then /bin/systemctl reload-or-try-restart virtlockd.service >/dev/null 2>&1 || : /bin/systemctl reload-or-try-restart virtlogd.service >/dev/null 2>&1 || : fi %else if [ $1 -ge 1 ]; then /sbin/service virtlockd reload > /dev/null 2>&1 || : /sbin/service virtlogd reload > /dev/null 2>&1 || : fi %endif # In upgrade scenario we must explicitly enable virtlockd/virtlogd # sockets, if libvirtd is already enabled and start them if # libvirtd is running, otherwise you'll get failures to start # guests %triggerpostun daemon -- libvirt-daemon < 1.3.0 if [ $1 -ge 1 ] ; then %if %{with_systemd} /bin/systemctl is-enabled libvirtd.service 1>/dev/null 2>&1 && /bin/systemctl enable virtlogd.socket virtlogd-admin.socket || : /bin/systemctl is-active libvirtd.service 1>/dev/null 2>&1 && /bin/systemctl start virtlogd.socket virtlogd-admin.socket || : %else /sbin/chkconfig libvirtd 1>/dev/null 2>&1 && /sbin/chkconfig virtlogd on || : /sbin/service libvirtd status 1>/dev/null 2>&1 && /sbin/service virtlogd start || : /sbin/service virtlockd reload > /dev/null 2>&1 || : /sbin/service virtlogd reload > /dev/null 2>&1 || : %endif fi %posttrans daemon if [ -f %{_localstatedir}/lib/rpm-state/libvirt/restart ]; then %if %{with_systemd} /bin/systemctl try-restart libvirtd.service >/dev/null 2>&1 || : %else /sbin/service libvirtd condrestart > /dev/null 2>&1 || : %endif fi rm -rf %{_localstatedir}/lib/rpm-state/libvirt || : %post daemon-driver-network %if %{with_firewalld} %firewalld_reload %endif %postun daemon-driver-network %if %{with_firewalld} %firewalld_reload %endif %post daemon-config-network if test $1 -eq 1 && test ! -f %{_sysconfdir}/libvirt/qemu/networks/default.xml ; then # see if the network used by default network creates a conflict, # and try to resolve it # NB: 192.168.122.0/24 is used in the default.xml template file; # do not modify any of those values here without also modifying # them in the template. orig_sub=122 sub=${orig_sub} nl=' ' routes="${nl}$(ip route show | cut -d' ' -f1)${nl}" case ${routes} in *"${nl}192.168.${orig_sub}.0/24${nl}"*) # there was a match, so we need to look for an unused subnet for new_sub in $(seq 124 254); do case ${routes} in *"${nl}192.168.${new_sub}.0/24${nl}"*) ;; *) sub=$new_sub break; ;; esac done ;; *) ;; esac UUID=`/usr/bin/uuidgen` sed -e "s/${orig_sub}/${sub}/g" \ -e "s,,\n $UUID," \ < %{_datadir}/libvirt/networks/default.xml \ > %{_sysconfdir}/libvirt/qemu/networks/default.xml ln -s ../default.xml %{_sysconfdir}/libvirt/qemu/networks/autostart/default.xml # Make sure libvirt picks up the new network defininiton mkdir -p %{_localstatedir}/lib/rpm-state/libvirt || : touch %{_localstatedir}/lib/rpm-state/libvirt/restart || : fi %posttrans daemon-config-network if [ -f %{_localstatedir}/lib/rpm-state/libvirt/restart ]; then %if %{with_systemd} /bin/systemctl try-restart libvirtd.service >/dev/null 2>&1 || : %else /sbin/service libvirtd condrestart > /dev/null 2>&1 || : %endif fi rm -rf %{_localstatedir}/lib/rpm-state/libvirt || : %post daemon-config-nwfilter cp %{_datadir}/libvirt/nwfilter/*.xml %{_sysconfdir}/libvirt/nwfilter/ # Make sure libvirt picks up the new nwfilter defininitons mkdir -p %{_localstatedir}/lib/rpm-state/libvirt || : touch %{_localstatedir}/lib/rpm-state/libvirt/restart || : %posttrans daemon-config-nwfilter if [ -f %{_localstatedir}/lib/rpm-state/libvirt/restart ]; then %if %{with_systemd} /bin/systemctl try-restart libvirtd.service >/dev/null 2>&1 || : %else /sbin/service libvirtd condrestart > /dev/null 2>&1 || : %endif fi rm -rf %{_localstatedir}/lib/rpm-state/libvirt || : %if %{with_systemd} %triggerun -- libvirt < 0.9.4 %{_bindir}/systemd-sysv-convert --save libvirtd >/dev/null 2>&1 ||: # If the package is allowed to autostart: /bin/systemctl --no-reload enable libvirtd.service >/dev/null 2>&1 ||: # Run these because the SysV package being removed won't do them /sbin/chkconfig --del libvirtd >/dev/null 2>&1 || : /bin/systemctl try-restart libvirtd.service >/dev/null 2>&1 || : %endif %if %{with_qemu} %pre daemon-driver-qemu # We want soft static allocation of well-known ids, as disk images # are commonly shared across NFS mounts by id rather than name; see # https://fedoraproject.org/wiki/Packaging:UsersAndGroups getent group kvm >/dev/null || groupadd -f -g 36 -r kvm getent group qemu >/dev/null || groupadd -f -g 107 -r qemu if ! getent passwd qemu >/dev/null; then if ! getent passwd 107 >/dev/null; then useradd -r -u 107 -g qemu -G kvm -d / -s /sbin/nologin -c "qemu user" qemu else useradd -r -g qemu -G kvm -d / -s /sbin/nologin -c "qemu user" qemu fi fi exit 0 %endif %preun client %if %{with_systemd} %if %{with_systemd_macros} %systemd_preun libvirt-guests.service %endif %else if [ $1 = 0 ]; then /sbin/chkconfig --del libvirt-guests rm -f /var/lib/libvirt/libvirt-guests fi %endif %post client /sbin/ldconfig %if %{with_systemd} %if %{with_systemd_macros} %systemd_post libvirt-guests.service %endif %else /sbin/chkconfig --add libvirt-guests %endif %postun client /sbin/ldconfig %if %{with_systemd} %if %{with_systemd_macros} %systemd_postun libvirt-guests.service %endif %triggerun client -- libvirt < 0.9.4 %{_bindir}/systemd-sysv-convert --save libvirt-guests >/dev/null 2>&1 ||: # If the package is allowed to autostart: /bin/systemctl --no-reload enable libvirt-guests.service >/dev/null 2>&1 ||: # Run this because the SysV package being removed won't do them /sbin/chkconfig --del libvirt-guests >/dev/null 2>&1 || : %endif %if %{with_sanlock} %post lock-sanlock if getent group sanlock > /dev/null ; then chmod 0770 %{_localstatedir}/lib/libvirt/sanlock chown root:sanlock %{_localstatedir}/lib/libvirt/sanlock fi %endif %if %{with_lxc} %pre login-shell getent group virtlogin >/dev/null || groupadd -r virtlogin exit 0 %endif %files %files docs %doc AUTHORS ChangeLog.gz NEWS README README.md %doc libvirt-docs/* # API docs %dir %{_datadir}/gtk-doc/html/libvirt/ %doc %{_datadir}/gtk-doc/html/libvirt/*.devhelp %doc %{_datadir}/gtk-doc/html/libvirt/*.html %doc %{_datadir}/gtk-doc/html/libvirt/*.png %doc %{_datadir}/gtk-doc/html/libvirt/*.css %doc examples/hellolibvirt %doc examples/object-events %doc examples/dominfo %doc examples/domsuspend %doc examples/dommigrate %doc examples/openauth %doc examples/xml %doc examples/rename %doc examples/systemtap %doc examples/admin %files daemon %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/ %if %{with_systemd} %{_unitdir}/libvirtd.service %{_unitdir}/virt-guest-shutdown.target %{_unitdir}/virtlogd.service %{_unitdir}/virtlogd.socket %{_unitdir}/virtlogd-admin.socket %{_unitdir}/virtlockd.service %{_unitdir}/virtlockd.socket %{_unitdir}/virtlockd-admin.socket %else %{_sysconfdir}/rc.d/init.d/libvirtd %{_sysconfdir}/rc.d/init.d/virtlogd %{_sysconfdir}/rc.d/init.d/virtlockd %endif %config(noreplace) %{_sysconfdir}/sysconfig/libvirtd %config(noreplace) %{_sysconfdir}/sysconfig/virtlogd %config(noreplace) %{_sysconfdir}/sysconfig/virtlockd %config(noreplace) %{_sysconfdir}/libvirt/libvirtd.conf %config(noreplace) %{_sysconfdir}/libvirt/virtlogd.conf %config(noreplace) %{_sysconfdir}/libvirt/virtlockd.conf %config(noreplace) %{_sysconfdir}/sasl2/libvirt.conf %config(noreplace) %{_prefix}/lib/sysctl.d/60-libvirtd.conf %config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd %dir %{_datadir}/libvirt/ %ghost %dir %{_localstatedir}/run/libvirt/ %dir %attr(0711, root, root) %{_localstatedir}/lib/libvirt/images/ %dir %attr(0711, root, root) %{_localstatedir}/lib/libvirt/filesystems/ %dir %attr(0711, root, root) %{_localstatedir}/lib/libvirt/boot/ %dir %attr(0711, root, root) %{_localstatedir}/cache/libvirt/ %dir %attr(0755, root, root) %{_libdir}/libvirt/ %dir %attr(0755, root, root) %{_libdir}/libvirt/connection-driver/ %dir %attr(0755, root, root) %{_libdir}/libvirt/lock-driver %attr(0755, root, root) %{_libdir}/libvirt/lock-driver/lockd.so %{_datadir}/augeas/lenses/libvirtd.aug %{_datadir}/augeas/lenses/tests/test_libvirtd.aug %{_datadir}/augeas/lenses/virtlogd.aug %{_datadir}/augeas/lenses/tests/test_virtlogd.aug %{_datadir}/augeas/lenses/virtlockd.aug %{_datadir}/augeas/lenses/tests/test_virtlockd.aug %{_datadir}/augeas/lenses/libvirt_lockd.aug %if %{with_qemu} %{_datadir}/augeas/lenses/tests/test_libvirt_lockd.aug %endif %{_datadir}/polkit-1/actions/org.libvirt.unix.policy %{_datadir}/polkit-1/actions/org.libvirt.api.policy %{_datadir}/polkit-1/rules.d/50-libvirt.rules %dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/ %attr(0755, root, root) %{_libexecdir}/libvirt_iohelper %attr(0755, root, root) %{_sbindir}/libvirtd %attr(0755, root, root) %{_sbindir}/virtlogd %attr(0755, root, root) %{_sbindir}/virtlockd %{_mandir}/man8/libvirtd.8* %{_mandir}/man8/virtlogd.8* %{_mandir}/man8/virtlockd.8* %{_mandir}/man7/virkey*.7* %doc examples/polkit/*.rules %files daemon-config-network %dir %{_datadir}/libvirt/networks/ %{_datadir}/libvirt/networks/default.xml %files daemon-config-nwfilter %dir %{_datadir}/libvirt/nwfilter/ %{_datadir}/libvirt/nwfilter/*.xml %ghost %{_sysconfdir}/libvirt/nwfilter/*.xml %files daemon-driver-interface %{_libdir}/%{name}/connection-driver/libvirt_driver_interface.so %files daemon-driver-network %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/ %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/networks/ %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/networks/autostart %ghost %dir %{_localstatedir}/run/libvirt/network/ %dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/network/ %dir %attr(0755, root, root) %{_localstatedir}/lib/libvirt/dnsmasq/ %attr(0755, root, root) %{_libexecdir}/libvirt_leaseshelper %{_libdir}/%{name}/connection-driver/libvirt_driver_network.so %if %{with_firewalld_zone} %{_prefix}/lib/firewalld/zones/libvirt.xml %endif %files daemon-driver-nodedev %{_libdir}/%{name}/connection-driver/libvirt_driver_nodedev.so %files daemon-driver-nwfilter %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/nwfilter/ %ghost %dir %{_localstatedir}/run/libvirt/network/ %{_libdir}/%{name}/connection-driver/libvirt_driver_nwfilter.so %files daemon-driver-secret %{_libdir}/%{name}/connection-driver/libvirt_driver_secret.so %files daemon-driver-storage %files daemon-driver-storage-core %attr(0755, root, root) %{_libexecdir}/libvirt_parthelper %{_libdir}/%{name}/connection-driver/libvirt_driver_storage.so %{_libdir}/%{name}/storage-backend/libvirt_storage_backend_fs.so %{_libdir}/%{name}/storage-file/libvirt_storage_file_fs.so %files daemon-driver-storage-disk %{_libdir}/%{name}/storage-backend/libvirt_storage_backend_disk.so %files daemon-driver-storage-logical %{_libdir}/%{name}/storage-backend/libvirt_storage_backend_logical.so %files daemon-driver-storage-scsi %{_libdir}/%{name}/storage-backend/libvirt_storage_backend_scsi.so %files daemon-driver-storage-iscsi %{_libdir}/%{name}/storage-backend/libvirt_storage_backend_iscsi.so %files daemon-driver-storage-mpath %{_libdir}/%{name}/storage-backend/libvirt_storage_backend_mpath.so %if %{with_storage_gluster} %files daemon-driver-storage-gluster %{_libdir}/%{name}/storage-backend/libvirt_storage_backend_gluster.so %{_libdir}/%{name}/storage-file/libvirt_storage_file_gluster.so %endif %if %{with_storage_rbd} %files daemon-driver-storage-rbd %{_libdir}/%{name}/storage-backend/libvirt_storage_backend_rbd.so %endif %if %{with_storage_sheepdog} %files daemon-driver-storage-sheepdog %{_libdir}/%{name}/storage-backend/libvirt_storage_backend_sheepdog.so %endif %if %{with_storage_zfs} %files daemon-driver-storage-zfs %{_libdir}/%{name}/storage-backend/libvirt_storage_backend_zfs.so %endif %if %{with_qemu} %files daemon-driver-qemu %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/ %dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/qemu/ %config(noreplace) %{_sysconfdir}/libvirt/qemu.conf %config(noreplace) %{_sysconfdir}/libvirt/qemu-lockd.conf %config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd.qemu %ghost %dir %attr(0700, root, root) %{_localstatedir}/run/libvirt/qemu/ %dir %attr(0751, %{qemu_user}, %{qemu_group}) %{_localstatedir}/lib/libvirt/qemu/ %dir %attr(0750, %{qemu_user}, %{qemu_group}) %{_localstatedir}/cache/libvirt/qemu/ %{_datadir}/augeas/lenses/libvirtd_qemu.aug %{_datadir}/augeas/lenses/tests/test_libvirtd_qemu.aug %{_libdir}/%{name}/connection-driver/libvirt_driver_qemu.so %dir %attr(0711, root, root) %{_localstatedir}/lib/libvirt/swtpm/ %dir %attr(0711, root, root) %{_localstatedir}/log/swtpm/libvirt/qemu/ %endif %if %{with_lxc} %files daemon-driver-lxc %dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/lxc/ %config(noreplace) %{_sysconfdir}/libvirt/lxc.conf %config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd.lxc %ghost %dir %{_localstatedir}/run/libvirt/lxc/ %dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/lxc/ %{_datadir}/augeas/lenses/libvirtd_lxc.aug %{_datadir}/augeas/lenses/tests/test_libvirtd_lxc.aug %attr(0755, root, root) %{_libexecdir}/libvirt_lxc %{_libdir}/%{name}/connection-driver/libvirt_driver_lxc.so %endif %if %{with_uml} %files daemon-driver-uml %dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/uml/ %config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd.uml %ghost %dir %{_localstatedir}/run/libvirt/uml/ %dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/uml/ %{_libdir}/%{name}/connection-driver/libvirt_driver_uml.so %endif %if %{with_libxl} %files daemon-driver-libxl %config(noreplace) %{_sysconfdir}/libvirt/libxl.conf %config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd.libxl %config(noreplace) %{_sysconfdir}/libvirt/libxl-lockd.conf %{_datadir}/augeas/lenses/libvirtd_libxl.aug %{_datadir}/augeas/lenses/tests/test_libvirtd_libxl.aug %dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/libxl/ %ghost %dir %{_localstatedir}/run/libvirt/libxl/ %dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/libxl/ %{_libdir}/%{name}/connection-driver/libvirt_driver_libxl.so %endif %if %{with_vbox} %files daemon-driver-vbox %{_libdir}/%{name}/connection-driver/libvirt_driver_vbox.so %endif %if %{with_qemu_tcg} %files daemon-qemu %endif %if %{with_qemu_kvm} %files daemon-kvm %endif %if %{with_lxc} %files daemon-lxc %endif %if %{with_uml} %files daemon-uml %endif %if %{with_libxl} %files daemon-xen %endif %if %{with_vbox} %files daemon-vbox %endif %if %{with_sanlock} %files lock-sanlock %if %{with_qemu} %config(noreplace) %{_sysconfdir}/libvirt/qemu-sanlock.conf %endif %if %{with_libxl} %config(noreplace) %{_sysconfdir}/libvirt/libxl-sanlock.conf %endif %attr(0755, root, root) %{_libdir}/libvirt/lock-driver/sanlock.so %{_datadir}/augeas/lenses/libvirt_sanlock.aug %{_datadir}/augeas/lenses/tests/test_libvirt_sanlock.aug %dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/sanlock %{_sbindir}/virt-sanlock-cleanup %{_mandir}/man8/virt-sanlock-cleanup.8* %attr(0755, root, root) %{_libexecdir}/libvirt_sanlock_helper %endif %files client %{_mandir}/man1/virsh.1* %{_mandir}/man1/virt-xml-validate.1* %{_mandir}/man1/virt-pki-validate.1* %{_mandir}/man1/virt-host-validate.1* %{_bindir}/virsh %{_bindir}/virt-xml-validate %{_bindir}/virt-pki-validate %{_bindir}/virt-host-validate %{_datadir}/systemtap/tapset/libvirt_probes*.stp %{_datadir}/systemtap/tapset/libvirt_functions.stp %if %{with_qemu} %{_datadir}/systemtap/tapset/libvirt_qemu_probes*.stp %endif %if %{with_bash_completion} %{_datadir}/bash-completion/completions/virsh %endif %if %{with_systemd} %{_unitdir}/libvirt-guests.service %else %{_sysconfdir}/rc.d/init.d/libvirt-guests %endif %config(noreplace) %{_sysconfdir}/sysconfig/libvirt-guests %attr(0755, root, root) %{_libexecdir}/libvirt-guests.sh %files libs -f %{name}.lang # RHEL6 doesn't have 'license' macro %{!?_licensedir:%global license %%doc} %license COPYING COPYING.LESSER %config(noreplace) %{_sysconfdir}/libvirt/libvirt.conf %config(noreplace) %{_sysconfdir}/libvirt/libvirt-admin.conf %{_libdir}/libvirt.so.* %{_libdir}/libvirt-qemu.so.* %{_libdir}/libvirt-lxc.so.* %{_libdir}/libvirt-admin.so.* %dir %{_datadir}/libvirt/ %dir %{_datadir}/libvirt/schemas/ %dir %attr(0755, root, root) %{_localstatedir}/lib/libvirt/ %{_datadir}/libvirt/schemas/basictypes.rng %{_datadir}/libvirt/schemas/capability.rng %{_datadir}/libvirt/schemas/cputypes.rng %{_datadir}/libvirt/schemas/domain.rng %{_datadir}/libvirt/schemas/domaincaps.rng %{_datadir}/libvirt/schemas/domaincommon.rng %{_datadir}/libvirt/schemas/domainsnapshot.rng %{_datadir}/libvirt/schemas/interface.rng %{_datadir}/libvirt/schemas/network.rng %{_datadir}/libvirt/schemas/networkcommon.rng %{_datadir}/libvirt/schemas/nodedev.rng %{_datadir}/libvirt/schemas/nwfilter.rng %{_datadir}/libvirt/schemas/nwfilter_params.rng %{_datadir}/libvirt/schemas/nwfilterbinding.rng %{_datadir}/libvirt/schemas/secret.rng %{_datadir}/libvirt/schemas/storagecommon.rng %{_datadir}/libvirt/schemas/storagepool.rng %{_datadir}/libvirt/schemas/storagevol.rng %{_datadir}/libvirt/cpu_map.xml %{_datadir}/libvirt/test-screenshot.png %files admin %{_mandir}/man1/virt-admin.1* %{_bindir}/virt-admin %if %{with_bash_completion} %{_datadir}/bash-completion/completions/virt-admin %endif %if %{with_bash_completion} %files bash-completion %{_datadir}/bash-completion/completions/vsh %endif %if %{with_wireshark} %files wireshark %{wireshark_plugindir}/libvirt.so %endif %files nss %{_libdir}/libnss_libvirt.so.2 %{_libdir}/libnss_libvirt_guest.so.2 %if %{with_lxc} %files login-shell %attr(4750, root, virtlogin) %{_bindir}/virt-login-shell %config(noreplace) %{_sysconfdir}/libvirt/virt-login-shell.conf %{_mandir}/man1/virt-login-shell.1* %endif %files devel %{_libdir}/libvirt.so %{_libdir}/libvirt-admin.so %{_libdir}/libvirt-qemu.so %{_libdir}/libvirt-lxc.so %dir %{_includedir}/libvirt %{_includedir}/libvirt/virterror.h %{_includedir}/libvirt/libvirt.h %{_includedir}/libvirt/libvirt-admin.h %{_includedir}/libvirt/libvirt-common.h %{_includedir}/libvirt/libvirt-domain.h %{_includedir}/libvirt/libvirt-domain-snapshot.h %{_includedir}/libvirt/libvirt-event.h %{_includedir}/libvirt/libvirt-host.h %{_includedir}/libvirt/libvirt-interface.h %{_includedir}/libvirt/libvirt-network.h %{_includedir}/libvirt/libvirt-nodedev.h %{_includedir}/libvirt/libvirt-nwfilter.h %{_includedir}/libvirt/libvirt-secret.h %{_includedir}/libvirt/libvirt-storage.h %{_includedir}/libvirt/libvirt-stream.h %{_includedir}/libvirt/libvirt-qemu.h %{_includedir}/libvirt/libvirt-lxc.h %{_libdir}/pkgconfig/libvirt.pc %{_libdir}/pkgconfig/libvirt-admin.pc %{_libdir}/pkgconfig/libvirt-qemu.pc %{_libdir}/pkgconfig/libvirt-lxc.pc %dir %{_datadir}/libvirt/api/ %{_datadir}/libvirt/api/libvirt-api.xml %{_datadir}/libvirt/api/libvirt-admin-api.xml %{_datadir}/libvirt/api/libvirt-qemu-api.xml %{_datadir}/libvirt/api/libvirt-lxc-api.xml # Needed building python bindings %doc docs/libvirt-api.xml %changelog * Fri Dec 13 2019 Jiri Denemark - 4.5.0-37 - cpu_map: Add TAA_NO bit for IA32_ARCH_CAPABILITIES MSR (CVE-2019-11135) - cpu_map: Add TSX_CTRL bit for IA32_ARCH_CAPABILITIES MSR (CVE-2019-11135) * Thu Nov 21 2019 Jiri Denemark - 4.5.0-36 - cpu_conf: Pass policy to CPU feature filtering callbacks (rhbz#1749672, rhbz#1756156, rhbz#1721608) - qemuxml2*test: Add tests for Icelake-Server, -pconfig (rhbz#1749672, rhbz#1756156, rhbz#1721608) - qemu: Drop disabled CPU features unknown to QEMU (rhbz#1749672, rhbz#1756156, rhbz#1721608) - cputest: Add data for Ice Lake Server CPU (rhbz#1749672, rhbz#1756156, rhbz#1721608) - cpu_map: Drop pconfig from Icelake-Server CPU model (rhbz#1749672, rhbz#1756156, rhbz#1721608) - qemu: Fix NULL ptr dereference caused by qemuDomainDefFormatBufInternal (rhbz#1749672, rhbz#1756156, rhbz#1721608) * Mon Sep 16 2019 Jiri Denemark - 4.5.0-35 - vircgroupv2: fix setting cpu.max period (rhbz#1749227) * Wed Sep 4 2019 Jiri Denemark - 4.5.0-34 - vircgroupv2: fix abort in VIR_AUTOFREE (rhbz#1747440) * Mon Aug 26 2019 Jiri Denemark - 4.5.0-33 - vircgroupv2: fix parsing multiple values in single file (rhbz#1741825) - vircgroupv2: fix virCgroupV2GetCpuCfsQuota for "max" value (rhbz#1741837) * Mon Aug 19 2019 Jiri Denemark - 4.5.0-32 - virDomainObjListAddLocked: Produce better error message than 'Duplicate key' (rhbz#1737790) - virdbus: Grab a ref as long as the while loop is executed (rhbz#1741900) * Tue Jul 30 2019 Jiri Denemark - 4.5.0-31 - virDomainObjListAddLocked: fix double free (rhbz#1728530) - docs: schemas: Decouple the virtio options from each other (rhbz#1729675) - util: command: use VIR_AUTOFREE instead of VIR_FREE for scalar types (rhbz#1721434) - util: command: define cleanup function using VIR_DEFINE_AUTOPTR_FUNC (rhbz#1721434) - util: netdevopenvswitch: use VIR_AUTOFREE instead of VIR_FREE for scalar types (rhbz#1721434) - util: virnetdevopenvswitch: Drop an unused variable @ovs_timeout (rhbz#1721434) - util: netdevopenvswitch: use VIR_AUTOPTR for aggregate types (rhbz#1721434) - util: suppress unimportant ovs-vsctl errors when getting interface stats (rhbz#1721434) - virNetDevOpenvswitchInterfaceStats: Optimize for speed (rhbz#1721434) - test: Introduce virnetdevopenvswitchtest (rhbz#1721434) - vircommand: Separate mass FD closing into a function (rhbz#1721434) - virCommand: use procfs to learn opened FDs (rhbz#1721434) - util: command: Ignore bitmap errors when enumerating file descriptors to close (rhbz#1721434) - util: Avoid possible error in virCommandMassClose (rhbz#1721434) - vircgroup: fix cgroups v2 controllers detection (rhbz#1689297) - vircgroupv2: store enabled controllers (rhbz#1689297) * Wed Jul 3 2019 Jiri Denemark - 4.5.0-30 - virWaitForDevices: Drop confusing part of comment (rhbz#1710575) - lib: Drop UDEVSETTLE (rhbz#1710575) - m4: Provide default value fore UDEVADM (rhbz#1710575) - m4: Drop needless string checks (rhbz#1710575) - util: vircgroup: introduce virCgroup(Get|Set)ValueRaw (rhbz#1658890) - util: vircgroup: move virCgroupGetValueStr out of virCgroupGetValueForBlkDev (rhbz#1658890) - util: vircgroupv1: add support for BFQ blkio files (rhbz#1658890) - util: vircgroupv2: add support for BFQ files (rhbz#1658890) - Handle copying bitmaps to larger data buffers (rhbz#1703160) * Tue Jul 2 2019 Jiri Denemark - 4.5.0-29 - cpu: allow include files for CPU definition (rhbz#1686895) - cpu: fix cleanup when signature parsing fails (rhbz#1686895) - cpu: push more parsing logic into common code (rhbz#1686895) - cpu: simplify failure cleanup paths (rhbz#1686895) - cpu_map: Add support for arch-capabilities feature (rhbz#1693433) - cputest: Add data for Intel(R) Xeon(R) CPU E5-2630 v4 (rhbz#1686895) - cputest: Add data for Intel(R) Core(TM) i7-7600U (rhbz#1686895) - cputest: Add data for Intel(R) Xeon(R) CPU E7540 (rhbz#1686895) - cputest: Add data for Intel(R) Xeon(R) CPU E5-2650 (rhbz#1686895) - cputest: Add data for Intel(R) Core(TM) i7-8700 (rhbz#1686895) - cpu_x86: Separate ancestor model parsing from x86ModelParse (rhbz#1686895) - cpu_x86: Separate signature parsing from x86ModelParse (rhbz#1686895) - cpu_x86: Separate vendor parsing from x86ModelParse (rhbz#1686895) - cpu_x86: Separate feature list parsing from x86ModelParse (rhbz#1686895) - cpu_x86: Make sure CPU model names are unique in cpu_map (rhbz#1686895) - cpu_x86: Add x86ModelCopySignatures helper (rhbz#1686895) - cpu_x86: Store CPU signature in an array (rhbz#1686895) - cpu_x86: Allow multiple signatures for a CPU model (rhbz#1686895) - cpu_x86: Log decoded CPU model and signatures (rhbz#1686895) - qemu_capabilities: Inroduce virQEMUCapsGetCPUModelX86Data (rhbz#1686895) - qemu_capabilities: Introduce virQEMUCapsGetCPUModelInfo (rhbz#1686895) - qemu_capabilities: Use virQEMUCapsGetCPUModelInfo (rhbz#1686895) - cpu_x86: Add virCPUx86DataGetSignature for tests (rhbz#1686895) - cpu_map: Add hex representation of signatures (rhbz#1686895) - cputest: Test CPU signatures (rhbz#1686895) - cpu_map: Add more signatures for Conroe CPU model (rhbz#1686895) - cpu_map: Add more signatures for Penryn CPU model (rhbz#1686895) - cpu_map: Add more signatures for Nehalem CPU models (rhbz#1686895) - cpu_map: Add more signatures for Westmere CPU model (rhbz#1686895) - cpu_map: Add more signatures for SandyBridge CPU models (rhbz#1686895) - cpu_map: Add more signatures for IvyBridge CPU models (rhbz#1686895) - cpu_map: Add more signatures for Haswell CPU models (rhbz#1686895) - cpu_map: Add more signatures for Broadwell CPU models (rhbz#1686895) - cpu_map: Add more signatures for Skylake-Client CPU models (rhbz#1686895) - cpu: Don't access invalid memory in virCPUx86Translate (rhbz#1686895) - cpu_x86: Require within in CPU map (rhbz#1697627) - cputest: Add data for Intel(R) Xeon(R) Platinum 8268 CPU (rhbz#1693433) - cpu_map: Add Cascadelake-Server CPU model (rhbz#1693433) - cpu_x86: Introduce virCPUx86DataItem container struct (rhbz#1697627) - cpu_x86: Rename virCPUx86Vendor.cpuid (rhbz#1697627) - cpu_x86: Rename virCPUx86DataItem variables (rhbz#1697627) - cpu_x86: Rename x86DataCpuidNext function (rhbz#1697627) - cpu_x86: Rename x86DataCpuid (rhbz#1697627) - cpu_x86: Rename virCPUx86CPUIDSorter (rhbz#1697627) - cpu_x86: Rename virCPUx86DataAddCPUIDInt (rhbz#1697627) - cpu_x86: Rename virCPUx86DataAddCPUID (rhbz#1697627) - cpu_x86: Rename virCPUx86VendorToCPUID (rhbz#1697627) - cpu_x86: Simplify x86DataAdd (rhbz#1697627) - cpu_x86: Introduce virCPUx86DataCmp (rhbz#1697627) - cpu_x86: Make x86cpuidSetBits more general (rhbz#1697627) - cpu_x86: Make x86cpuidClearBits more general (rhbz#1697627) - cpu_x86: Make x86cpuidAndBits more general (rhbz#1697627) - cpu_x86: Make x86cpuidMatchMasked more general (rhbz#1697627) - cpu_x86: Make x86cpuidMatch more general (rhbz#1697627) - cpu_x86: Store virCPUx86DataItem content in union (rhbz#1697627) - cpu_x86: Add support for storing MSR features in CPU map (rhbz#1697627) - cpu_x86: Move *CheckFeature functions (rhbz#1697627) - cputest: Add support for MSR features to cpu-parse.sh (rhbz#1697627) - util: file: introduce VIR_AUTOCLOSE macro to close fd of the file automatically (rhbz#1697627) - vircpuhost: Add support for reading MSRs (rhbz#1697627) - virhostcpu: Make virHostCPUGetMSR() work only on x86 (rhbz#1697627) - cpu_x86: Fix placement of *CheckFeature functions (rhbz#1697627) - cpu_conf: Introduce virCPUDefFilterFeatures (rhbz#1697627) - qemu_command: Use consistent syntax for CPU features (rhbz#1697627) - tests: Add QEMU caps data for future 4.1.0 (rhbz#1697627) - tests: Add domain capabilities case for QEMU 4.1.0 (rhbz#1697627) - qemuxml2argvtest: Add test for CPU features translation (rhbz#1697627) - qemu: Add APIs for translating CPU features (rhbz#1697627) - qemu: Probe for max-x86_64-cpu type (rhbz#1697627) - qemu: Probe for "unavailable-features" CPU property (rhbz#1697627) - qemu: Probe host CPU after capabilities (rhbz#1697627) - qemu_command: Use canonical names of CPU features (rhbz#1697627) - qemu: Translate feature names from query-cpu-model-expansion (rhbz#1697627) - qemu: Don't use full CPU model expansion (rhbz#1697627) - qemu: Make qemuMonitorGetGuestCPU usable on x86 only (rhbz#1697627) - cpu: Introduce virCPUDataAddFeature (rhbz#1697627) - qemu: Add type filter to qemuMonitorJSONParsePropsList (rhbz#1697627) - util: string: Introduce macro for automatic string lists (rhbz#1697627) - util: json: define cleanup function using VIR_DEFINE_AUTOPTR_FUNC (rhbz#1697627) - qemu: Introduce generic qemuMonitorGetGuestCPU (rhbz#1697627) - qemu_process: Prefer generic qemuMonitorGetGuestCPU (rhbz#1697627) - util: Rework virStringListAdd (rhbz#1697627) - conf: Introduce virCPUDefCheckFeatures (rhbz#1697627) - cpu_x86: Turn virCPUx86DataIteratorInit into a function (rhbz#1697627) - cpu_x86: Introduce virCPUx86FeatureFilter*MSR (rhbz#1697627) - cpu_x86: Read CPU features from IA32_ARCH_CAPABILITIES MSR (rhbz#1697627) - cpu_map: Introduce IA32_ARCH_CAPABILITIES MSR features (rhbz#1697627) - qemu: Forbid MSR features with old QEMU (rhbz#1697627) - qemu: Drop MSR features from host-model with old QEMU (rhbz#1697627) - cpu_x86: Fix memory leak - virCPUx86GetHost (rhbz#1697627) - qemu: Use @tmpChr in qemuDomainDetachChrDevice to build device string (rhbz#1624204) - qemu: Drop "user-" prefix for guestfwd netdev (rhbz#1624204) - qemu_hotplug: Attach guestfwd using netdev_add (rhbz#1624204) - qemu_hotplug: Detach guestfwd using netdev_del (rhbz#1624204) - qemuhotplugtest: Test guestfwd attach and detach (rhbz#1624204) - daemon: Register secret driver before storage driver (rhbz#1685151) - bhyve: Move autostarting of domains into bhyveStateInitialize (rhbz#1685151) - Revert "virStateDriver - Separate AutoStart from Initialize" (rhbz#1685151) - Revert "Separate out StateAutoStart from StateInitialize" (rhbz#1685151) - util: moving 'type' argument to avoid issues with mount() syscall. (rhbz#1689297) - util: cgroup: use VIR_AUTOFREE instead of VIR_FREE for scalar types (rhbz#1689297) - vircgroup: Rename structs to start with underscore (rhbz#1689297) - vircgroup: Introduce standard set of typedefs and use them (rhbz#1689297) - vircgroup: Extract file link resolving into separate function (rhbz#1689297) - vircgroup: Remove unused function virCgroupKill() (rhbz#1689297) - vircgroup: Unexport unused function virCgroupAddTaskController() (rhbz#1689297) - vircgroup: Unexport unused function virCgroupRemoveRecursively (rhbz#1689297) - vircgroup: Move function used in tests into vircgrouppriv.h (rhbz#1689297) - vircgroup: Remove pointless bool parameter (rhbz#1689297) - vircgroup: Extract mount options matching into function (rhbz#1689297) - vircgroup: Use virCgroupMountOptsMatchController in virCgroupDetectPlacement (rhbz#1689297) - vircgroup: Introduce virCgroupEnableMissingControllers (rhbz#1689297) - vircgroup: machinename will never be NULL (rhbz#1689297) - vircgroup: Remove virCgroupAddTaskController (rhbz#1689297) - vircgroup: Introduce virCgroupGetMemoryStat (rhbz#1689297) - lxc: Use virCgroupGetMemoryStat (rhbz#1689297) - vircgroup: fix MinGW build (rhbz#1689297) - vircgroup: Duplicate string before modifying (rhbz#1689297) - vircgroup: Extract controller detection into function (rhbz#1689297) - vircgroup: Extract placement validation into function (rhbz#1689297) - vircgroup: Split virCgroupPathOfController into two functions (rhbz#1689297) - vircgroup: Call virCgroupRemove inside virCgroupMakeGroup (rhbz#1689297) - vircgroup: Simplify if conditions in virCgroupMakeGroup (rhbz#1689297) - vircgroup: Remove obsolete sa_assert (rhbz#1689297) - tests: Resolve possible overrun (rhbz#1689297) - vircgroup: cleanup controllers not managed by systemd on error (rhbz#1689297) - vircgroup: fix bug in virCgroupEnableMissingControllers (rhbz#1689297) - vircgroup: rename virCgroupAdd.*Task to virCgroupAdd.*Process (rhbz#1689297) - vircgroup: introduce virCgroupTaskFlags (rhbz#1689297) - vircgroup: introduce virCgroupAddThread (rhbz#1689297) - vircgroupmock: cleanup unused cgroup files (rhbz#1689297) - vircgroupmock: rewrite cgroup fopen mocking (rhbz#1689297) - vircgrouptest: call virCgroupDetectMounts directly (rhbz#1689297) - vircgrouptest: call virCgroupNewSelf instead virCgroupDetectMounts (rhbz#1689297) - util: introduce vircgroupbackend files (rhbz#1689297) - vircgroup: introduce cgroup v1 backend files (rhbz#1689297) - vircgroup: extract virCgroupV1Available (rhbz#1689297) - vircgroup: detect available backend for cgroup (rhbz#1689297) - vircgroup: extract virCgroupV1ValidateMachineGroup (rhbz#1689297) - vircgroup: extract virCgroupV1CopyMounts (rhbz#1689297) - vircgroup: extract v1 detect functions (rhbz#1689297) - vircgroup: extract virCgroupV1CopyPlacement (rhbz#1689297) - vircgroup: extract virCgroupV1ValidatePlacement (rhbz#1689297) - vircgroup: extract virCgroupV1StealPlacement (rhbz#1689297) - vircgroup: extract virCgroupV1DetectControllers (rhbz#1689297) - vircgroup: extract virCgroupV1HasController (rhbz#1689297) - vircgroup: extract virCgroupV1GetAnyController (rhbz#1689297) - vircgroup: extract virCgroupV1PathOfController (rhbz#1689297) - vircgroup: extract virCgroupV1MakeGroup (rhbz#1689297) - vircgroup: extract virCgroupV1Remove (rhbz#1689297) - vircgroup: extract virCgroupV1AddTask (rhbz#1689297) - vircgroup: extract virCgroupV1HasEmptyTasks (rhbz#1689297) - vircgroup: extract virCgroupV1BindMount (rhbz#1689297) - vircgroup: extract virCgroupV1SetOwner (rhbz#1689297) - vircgroup: extract virCgroupV1(Set|Get)BlkioWeight (rhbz#1689297) - vircgroup: extract virCgroupV1GetBlkioIoServiced (rhbz#1689297) - vircgroup: extract virCgroupV1GetBlkioIoDeviceServiced (rhbz#1689297) - vircgroup: extract virCgroupV1(Set|Get)BlkioDeviceWeight (rhbz#1689297) - vircgroup: extract virCgroupV1(Set|Get)BlkioDeviceReadIops (rhbz#1689297) - vircgroup: extract virCgroupV1(Set|Get)BlkioDeviceWriteIops (rhbz#1689297) - vircgroup: extract virCgroupV1(Set|Get)BlkioDeviceReadBps (rhbz#1689297) - vircgroup: extract virCgroupV1(Set|Get)BlkioDeviceWriteBps (rhbz#1689297) - vircgroup: extract virCgroupV1SetMemory (rhbz#1689297) - vircgroup: extract virCgroupV1GetMemoryStat (rhbz#1689297) - vircgroup: extract virCgroupV1GetMemoryUsage (rhbz#1689297) - vircgroup: extract virCgroupV1(Set|Get)Memory*Limit (rhbz#1689297) - vircgroup: extract virCgroupV1GetMemSwapUsage (rhbz#1689297) - vircgroup: extract virCgroupV1(Allow|Deny)Device (rhbz#1689297) - vircgroup: extract virCgroupV1(Allow|Deny)AllDevices (rhbz#1689297) - vircgroup: extract virCgroupV1(Set|Get)CpuShares (rhbz#1689297) - vircgroup: extract virCgroupV1(Set|Get)CpuCfsPeriod (rhbz#1689297) - vircgroup: extract virCgroupV1(Set|Get)CpuCfsQuota (rhbz#1689297) - vircgroup: extract virCgroupV1SupportsCpuBW (rhbz#1689297) - vircgroup: extract virCgroupV1GetCpuacct*Usage (rhbz#1689297) - vircgroup: extract virCgroupV1GetCpuacctStat (rhbz#1689297) - vircgroup: extract virCgroupV1(Set|Get)FreezerState (rhbz#1689297) - vircgroup: extract virCgroupV1(Set|Get)CpusetMems (rhbz#1689297) - vircgroup: extract virCgroupV1(Set|Get)CpusetMemoryMigrate (rhbz#1689297) - vircgroup: extract virCgroupV1(Set|Get)CpusetCpus (rhbz#1689297) - vircgroup: rename virCgroupController into virCgroupV1Controller (rhbz#1689297) - vircgroup: rename controllers to legacy (rhbz#1689297) - vircgroup: remove VIR_CGROUP_SUPPORTED (rhbz#1689297) - vircgroup: include system headers only on linux (rhbz#1689297) - vircgroupv1: fix build on non-linux OSes (rhbz#1689297) - Revert "vircgroup: cleanup controllers not managed by systemd on error" (rhbz#1689297) - util: introduce cgroup v2 files (rhbz#1689297) - vircgroup: introduce virCgroupV2Available (rhbz#1689297) - vircgroup: introduce virCgroupV2ValidateMachineGroup (rhbz#1689297) - vircgroup: introduce virCgroupV2CopyMounts (rhbz#1689297) - vircgroup: introduce virCgroupV2CopyPlacement (rhbz#1689297) - vircgroup: introduce virCgroupV2DetectMounts (rhbz#1689297) - vircgroup: introduce virCgroupV2DetectPlacement (rhbz#1689297) - vircgroup: introduce virCgroupV2ValidatePlacement (rhbz#1689297) - vircgroup: introduce virCgroupV2StealPlacement (rhbz#1689297) - vircgroup: introduce virCgroupV2DetectControllers (rhbz#1689297) - vircgroup: introduce virCgroupV2HasController (rhbz#1689297) - vircgroup: introduce virCgroupV2GetAnyController (rhbz#1689297) - vircgroup: introduce virCgroupV2PathOfController (rhbz#1689297) - vircgroup: introduce virCgroupV2MakeGroup (rhbz#1689297) - vircgroup: introduce virCgroupV2Remove (rhbz#1689297) - vircgroup: introduce virCgroupV2AddTask (rhbz#1689297) - vircgroup: introduce virCgroupV2HasEmptyTasks (rhbz#1689297) - vircgroup: introduce virCgroupV2BindMount (rhbz#1689297) - vircgroup: introduce virCgroupV2SetOwner (rhbz#1689297) - vircgroup: introduce virCgroupV2(Set|Get)BlkioWeight (rhbz#1689297) - vircgroup: introduce virCgroupV2GetBlkioIoServiced (rhbz#1689297) - vircgroup: introduce virCgroupV2GetBlkioIoDeviceServiced (rhbz#1689297) - vircgroup: introduce virCgroupV2(Set|Get)BlkioDeviceWeight (rhbz#1689297) - vircgroup: introduce virCgroupV2(Set|Get)BlkioDeviceReadIops (rhbz#1689297) - vircgroup: introduce virCgroupV2(Set|Get)BlkioDeviceWriteIops (rhbz#1689297) - vircgroup: introduce virCgroupV2(Set|Get)BlkioDeviceReadBps (rhbz#1689297) - vircgroup: introduce virCgroupV2(Set|Get)BlkioDeviceWriteBps (rhbz#1689297) - vircgroup: introduce virCgroupV2SetMemory (rhbz#1689297) - vircgroup: introduce virCgroupV2GetMemoryStat (rhbz#1689297) - vircgroup: introduce virCgroupV2GetMemoryUsage (rhbz#1689297) - vircgroup: introduce virCgroupV2(Set|Get)MemoryHardLimit (rhbz#1689297) - vircgroup: introduce virCgroupV2(Set|Get)MemorySoftLimit (rhbz#1689297) - vircgroup: introduce virCgroupV2(Set|Get)MemSwapHardLimit (rhbz#1689297) - vircgroup: introduce virCgroupV2GetMemSwapUsage (rhbz#1689297) - vircgroup: introduce virCgroupV2(Set|Get)CpuShares (rhbz#1689297) - vircgroup: introduce virCgroupV2(Set|Get)CpuCfsPeriod (rhbz#1689297) - vircgroup: introduce virCgroupV2(Set|Get)CpuCfsQuota (rhbz#1689297) - vircgroup: introduce virCgroupV2SupportsCpuBW (rhbz#1689297) - vircgroup: introduce virCgroupV2GetCpuacctUsage (rhbz#1689297) - vircgroup: introduce virCgroupV2GetCpuacctStat (rhbz#1689297) - vircgroup: register cgroup v2 backend (rhbz#1689297) - vircgroup: add support for hybrid configuration (rhbz#1689297) - vircgroupmock: change cgroup prefix (rhbz#1689297) - vircgroupmock: add support to test cgroup v2 (rhbz#1689297) - vircgrouptest: introduce initFakeFS and cleanupFakeFS helpers (rhbz#1689297) - vircgrouptest: prepare testCgroupDetectMounts for cgroup v2 (rhbz#1689297) - vircgrouptest: add detect mounts test for cgroup v2 (rhbz#1689297) - vircgrouptest: add detect mounts test for hybrid cgroups (rhbz#1689297) - vircgrouptest: prepare validateCgroup for cgroupv2 (rhbz#1689297) - vircgrouptest: add cgroup v2 tests (rhbz#1689297) - vircgrouptest: add hybrid tests (rhbz#1689297) - virt-host-validate: rewrite cgroup detection to use util/vircgroup (rhbz#1689297) - virt-host-validate: require freezer for LXC (rhbz#1689297) - virt-host-validate: Fix build on non-Linux (rhbz#1689297) - tests: Use correct function name in error path (rhbz#1689297) - util: Fix virCgroupGetMemoryStat (rhbz#1689297) - tests: Augment vcgrouptest to add virCgroupGetMemoryStat (rhbz#1689297) - vircgroup: introduce virCgroupKillRecursiveCB (rhbz#1689297) - vircgroupv2: fix virCgroupV2ValidateMachineGroup (rhbz#1689297) - util: implement virCgroupV2(Set|Get)CpusetMems (rhbz#1689297) - util: implement virCgroupV2(Set|Get)CpusetMemoryMigrate (rhbz#1689297) - util: implement virCgroupV2(Set|Get)CpusetCpus (rhbz#1689297) - util: enable cgroups v2 cpuset controller for threads (rhbz#1689297) - util: vircgroup: pass parent cgroup into virCgroupDetectControllersCB (rhbz#1689297) - internal: introduce a family of NULLSTR macros (rhbz#1689297) - util: vircgroup: improve controller detection (rhbz#1689297) - util: vircgroupv2: use any controller to create thread directory (rhbz#1689297) - util: vircgroupv2: enable CPU controller only if it's available (rhbz#1689297) - util: vircgroupv2: separate return values of virCgroupV2EnableController (rhbz#1689297) - util: vircgroupv2: don't error out if enabling controller fails (rhbz#1689297) - util: vircgroupv2: mark only requested controllers as available (rhbz#1689297) - Revert "util: vircgroup: pass parent cgroup into virCgroupDetectControllersCB" (rhbz#1689297) - util: vircgroupv2: stop enabling missing controllers with systemd (rhbz#1689297) * Fri Jun 28 2019 Danilo de Paula - 4.5.0-28 - Rebuild all virt packages to fix RHEL's upgrade path - Resolves: rhbz#1695587 (Ensure modular RPM upgrade path) * Fri Jun 21 2019 Jiri Denemark - 4.5.0-27 - RHEL: spec: Disable gluster on i686 (rhbz#1722668) - rpc: virnetlibsshsession: update deprecated functions (rhbz#1722735) * Thu Jun 20 2019 Jiri Denemark - 4.5.0-26 - api: disallow virDomainSaveImageGetXMLDesc on read-only connections (CVE-2019-10161) - api: disallow virDomainManagedSaveDefineXML on read-only connections (CVE-2019-10166) - api: disallow virConnectGetDomainCapabilities on read-only connections (CVE-2019-10167) - api: disallow virConnect*HypervisorCPU on read-only connections (CVE-2019-10168) * Fri Jun 14 2019 Jiri Denemark - 4.5.0-25 - admin: reject clients unless their UID matches the current UID (CVE-2019-10132) - locking: restrict sockets to mode 0600 (CVE-2019-10132) - logging: restrict sockets to mode 0600 (CVE-2019-10132) - util: skip RDMA detection for non-PCI network devices (rhbz#1693299) - virfile: Detect ceph as shared FS (rhbz#1698133) - virfile: added GPFS as shared fs (rhbz#1698133) - util: bitmap: define cleanup function using VIR_DEFINE_AUTOPTR_FUNC (rhbz#1716943) - qemu: Rework setting process affinity (rhbz#1716943) - qemu: Set up EMULATOR thread and cpuset.mems before exec()-ing qemu (rhbz#1716943) - conf: Add definitions for 'uid' and 'fid' PCI address attributes (rhbz#1508149) - qemu: Introduce zPCI capability (rhbz#1508149) - qemu: Enable PCI multi bus for S390 guests (rhbz#1508149) - conf: Introduce extension flag and zPCI member for PCI address (rhbz#1508149) - conf: Introduce address caching for PCI extensions (rhbz#1508149) - qemu: Auto add pci-root for s390/s390x guests (rhbz#1508149) - conf: use virXMLFormatElement() in virDomainDeviceInfoFormat() (rhbz#1508149) - conf: Introduce parser, formatter for uid and fid (rhbz#1508149) - qemu: Add zPCI address definition check (rhbz#1508149) - conf: Allocate/release 'uid' and 'fid' in PCI address (rhbz#1508149) - qemu: Generate and use zPCI device in QEMU command line (rhbz#1508149) - qemu: Add hotpluging support for PCI devices on S390 guests (rhbz#1508149) - qemuDomainRemoveRNGDevice: Remove associated chardev too (rhbz#1508149) - qemu_hotplug: remove erroneous call to qemuDomainDetachExtensionDevice() (rhbz#1508149) - qemu_hotplug: remove another erroneous qemuDomainDetachExtensionDevice() call (rhbz#1508149) - util: Propagate numad failures correctly (rhbz#1716907) - util: Introduce virBitmapUnion() (rhbz#1716908) - util: Introduce virNumaNodesetToCPUset() (rhbz#1716908) - qemu: Fix qemuProcessInitCpuAffinity() (rhbz#1716908) - qemu: Fix leak in qemuProcessInitCpuAffinity() (rhbz#1716908) - qemu: Drop cleanup label from qemuProcessInitCpuAffinity() (rhbz#1716908) - qemu: Fix NULL pointer access in qemuProcessInitCpuAffinity() (rhbz#1716908) - qemuBuildMemoryBackendProps: Pass @priv instead of its individual members (rhbz#1624223) - qemu: Don't use -mem-prealloc among with .prealloc=yes (rhbz#1624223) - nwfilter: fix adding std MAC and IP values to filter binding (rhbz#1691356) - qemuProcessBuildDestroyMemoryPathsImpl: Don't overwrite error (rhbz#1658112) - qemu_security: Fully implement qemuSecurityDomainSetPathLabel (rhbz#1658112) - qemu: process: SEV: Assume libDir to be the directory to create files in (rhbz#1658112) - qemu: process: SEV: Relabel guest owner's SEV files created before start (rhbz#1658112) * Tue May 14 2019 Jiri Denemark - 4.5.0-24 - tests: qemuxml2argv: add CAPS_ARCH_LATEST macro (rhbz#1698855) - qemu: Add ccw support for vhost-vsock (rhbz#1698855) - qemu: Allow creating ppc64 guests with graphics and no USB mouse (rhbz#1683681) - conf: Expose virDomainSCSIDriveAddressIsUsed (rhbz#1692354) - qemuhotplugtest: Don't plug a SCSI disk at unit 7 (rhbz#1692354) - qemu_hotplug: Check for duplicate drive addresses (rhbz#1692354) - cpu_map: Add support for cldemote CPU feature (rhbz#1537731) - util: alloc: add macros for implementing automatic cleanup functionality (rhbz#1505998) - qemu: domain: Simplify non-VFIO memLockLimit calculation for PPC64 (rhbz#1505998) - qemu_domain: add a PPC64 memLockLimit helper (rhbz#1505998) - qemu_domain: NVLink2 bridge detection function for PPC64 (rhbz#1505998) - PPC64 support for NVIDIA V100 GPU with NVLink2 passthrough (rhbz#1505998) - cpu_x86: Do not cache microcode version (CVE-2018-12127, CVE-2019-11091, CVE-2018-12126, CVE-2018-12130) - qemu: Don't cache microcode version (CVE-2018-12127, CVE-2019-11091, CVE-2018-12126, CVE-2018-12130) - cputest: Add data for Intel(R) Xeon(R) CPU E3-1225 v5 (CVE-2018-12127, CVE-2019-11091, CVE-2018-12126, CVE-2018-12130) - cpu_map: Define md-clear CPUID bit (CVE-2018-12127, CVE-2019-11091, CVE-2018-12126, CVE-2018-12130) * Fri Feb 15 2019 Jiri Denemark - 4.5.0-23 - network: explicitly allow icmp/icmpv6 in libvirt zonefile (rhbz#1650320) * Fri Feb 15 2019 Jiri Denemark - 4.5.0-22 - util: fix memory leak in virFirewallDInterfaceSetZone() (rhbz#1650320) * Fri Feb 8 2019 Jiri Denemark - 4.5.0-21 - docs: Drop /dev/net/tun from the list of shared devices (rhbz#1665400) - qemu: conf: Remove /dev/sev from the default cgroup device acl list (rhbz#1665400) - qemu: cgroup: Expose /dev/sev/ only to domains that require SEV (rhbz#1665400) - qemu: domain: Add /dev/sev into the domain mount namespace selectively (rhbz#1665400) - security: dac: Relabel /dev/sev in the namespace (rhbz#1665400) - qemu: caps: Use CAP_DAC_OVERRIDE for probing to avoid permission issues (rhbz#1665400) - qemu: caps: Don't try to ask for CAP_DAC_OVERRIDE if non-root (rhbz#1665400) - Revert "RHEL: Require firewalld-filesystem for firewalld rpm macros" (rhbz#1650320) - Revert "RHEL: network: regain guest network connectivity after firewalld switch to nftables" (rhbz#1650320) - configure: change HAVE_FIREWALLD to WITH_FIREWALLD (rhbz#1650320) - util: move all firewalld-specific stuff into its own files (rhbz#1650320) - util: new virFirewallD APIs + docs (rhbz#1650320) - configure: selectively install a firewalld 'libvirt' zone (rhbz#1650320) - network: set firewalld zone of bridges to "libvirt" zone when appropriate (rhbz#1650320) - network: allow configuring firewalld zone for virtual network bridge device (rhbz#1650320) - util: remove test code accidentally committed to virFirewallDZoneExists (rhbz#1650320) - qemu: command: Don't skip 'readonly' and throttling info for empty drive (rhbz#1670337) * Mon Jan 28 2019 Jiri Denemark - 4.5.0-20 - RHEL: qemu: Fix crash trying to use iSCSI hostdev (rhbz#1669424) * Thu Jan 24 2019 Jiri Denemark - 4.5.0-19 - qemu: Fix logic error in qemuSetUnprivSGIO (rhbz#1666605) - tests: qemuxml2argv: Add test case for empty CDROM with cache mode (rhbz#1553255) - qemu: command: Don't format image properties for empty -drive (rhbz#1553255) * Mon Jan 14 2019 Jiri Denemark - 4.5.0-18 - conf: correct false boot order error during domain parse (rhbz#1630393) - qemu: Remove duplicated qemuAgentCheckError (rhbz#1665000) - qemu: require reply from guest agent in qemuAgentGetInterfaces (rhbz#1665000) - qemu: Filter non SCSI hostdevs in qemuHostdevPrepareSCSIDevices (rhbz#1665244) - util: remove const specifier from nlmsghdr arg to virNetlinkDumpCallback() (rhbz#1583131) - util: add a function to insert new interfaces to IPv6CheckForwarding list (rhbz#1583131) - util: use nlmsg_find_attr() instead of an open-coded loop (rhbz#1583131) - util: check accept_ra for all nexthop interfaces of multipath routes (rhbz#1583131) - util: make forgotten changes suggested during review of commit d40b820c (rhbz#1583131) * Mon Jan 7 2019 Jiri Denemark - 4.5.0-17 - virsh: Strip XML declaration when extracting CPU XMLs (rhbz#1659048) - RHEL: qemu: Add ability to set sgio values for hostdev (rhbz#1582424) - RHEL: qemu: Add check for unpriv sgio for SCSI generic host device (rhbz#1582424) - qemu: Alter @val usage in qemuSetUnprivSGIO (rhbz#1656362) - qemu: Alter qemuSetUnprivSGIO hostdev shareable logic (rhbz#1656362) * Mon Dec 17 2018 Jiri Denemark - 4.5.0-16 - util: Don't overflow in virRandomBits (rhbz#1655586) - virrandom: Avoid undefined behaviour in virRandomBits (rhbz#1655586) - spec: remove libcgroup and cgconfig (rhbz#1602407) - qemu: Drop duplicated code from qemuDomainDefValidateFeatures() (rhbz#1647822) - tests: Add capabilities data for QEMU 3.1.0 on ppc64 (rhbz#1647822) - qemu: Introduce QEMU_CAPS_MACHINE_PSERIES_CAP_NESTED_HV (rhbz#1647822) - conf: Parse and format nested-hv feature (rhbz#1647822) - qemu: Format nested-hv feature on the command line (rhbz#1647822) - qemu: Add check for whether KVM nesting is enabled (rhbz#1645139) - secret: Add check/validation for correct usage when LookupByUUID (rhbz#1656255) - cpu: Add support for "stibp" x86_64 feature (rhbz#1655032) * Mon Dec 3 2018 Jiri Denemark - 4.5.0-15 - virfile: Take symlink into account in virFileIsSharedFixFUSE (rhbz#1634782) - qemu: Ignore nwfilter binding instantiation issues during reconnect (rhbz#1648544) - qemu: Set identity for the reconnect all thread (rhbz#1648546) - Revert "access: Modify the VIR_ERR_ACCESS_DENIED to include driverName" (rhbz#1631608) - access: Modify the VIR_ERR_ACCESS_DENIED to include driverName (rhbz#1631608) - qemu: add vfio-ap capability (rhbz#1508146) - qemu: vfio-ap device support (rhbz#1508146) - qemu: Extract MDEV VFIO PCI validation code into a separate helper (rhbz#1508146) - conf: Move VFIO AP validation from post parse to QEMU validation code (rhbz#1508146) - qemu: Fix post-copy migration on the source (rhbz#1649169) * Fri Nov 9 2018 Jiri Denemark - 4.5.0-14 - storage: Remove secretPath from _virStorageBackendQemuImgInfo (rhbz#1645459) - storage: Allow for inputvol to have any format for encryption (rhbz#1645459) - storage: Allow inputvol to be encrypted (rhbz#1645459) - access: Modify the VIR_ERR_ACCESS_DENIED to include driverName (rhbz#1631608) - docs: Enhance polkit documentation to describe secondary connection (rhbz#1631608) - qemu: Don't ignore resume events (rhbz#1634758, rhbz#1643338) * Thu Nov 1 2018 Jiri Denemark - 4.5.0-13 - Revert "spec: Temporarily drop gluster support" (rhbz#1599339) * Wed Oct 17 2018 Jiri Denemark - 4.5.0-12 - RHEL: Require firewalld-filesystem for firewalld rpm macros (rhbz#1639932) * Tue Oct 16 2018 Jiri Denemark - 4.5.0-11 - virfile: fix cast-align error (rhbz#1634782) - virfiletest: Fix test name prefix for virFileInData test (rhbz#1634782) - virfiletst: Test virFileIsSharedFS (rhbz#1634782) - virFileIsSharedFSType: Detect direct mount points (rhbz#1634782) - virfile: Rework virFileIsSharedFixFUSE (rhbz#1634782) - RHEL: network: regain guest network connectivity after firewalld switch to nftables (rhbz#1638864) * Mon Oct 8 2018 Jiri Denemark - 4.5.0-10 - conf: Fix check for chardev source path (rhbz#1609723) - tests: Reuse qemucapabilities data for qemucaps2xml (rhbz#1629862) - tests: Add more tests to qemucaps2xml (rhbz#1629862) - qemu: Drop QEMU_CAPS_ENABLE_KVM (rhbz#1629862) - qemu: Avoid probing non-native binaries all the time (rhbz#1629862) - qemu: Clarify QEMU_CAPS_KVM (rhbz#1629862) - qemu: Don't check for /dev/kvm presence (rhbz#1629862) - tests: Follow up on qemucaps2xmldata rename (rhbz#1629862) - security: dac: also label listen UNIX sockets (rhbz#1634775) - spec: Set correct TLS priority (rhbz#1632269) - spec: Build ceph and gluster support everywhere (rhbz#1599546) - virsh: Require explicit --domain for domxml-to-native (rhbz#1634769) - virFileIsSharedFSType: Check for fuse.glusterfs too (rhbz#1634782) - qemu: fix up permissions for pre-created UNIX sockets (rhbz#1634775) - cpu_map: Add features for Icelake CPUs (rhbz#1527657, rhbz#1526625) - cpu_map: Add Icelake CPU models (rhbz#1526625) - qemu: Properly report VIR_DOMAIN_EVENT_RESUMED_FROM_SNAPSHOT (rhbz#1634758) - qemu: Report more appropriate running reasons (rhbz#1634758) - qemu: Pass running reason to RESUME event handler (rhbz#1634758) - qemu: Map running reason to resume event detail (rhbz#1634758) - qemu: Avoid duplicate resume events and state changes (rhbz#1634758) - conf: qemu: add support for Hyper-V frequency MSRs (rhbz#1589702) - conf: qemu: add support for Hyper-V reenlightenment notifications (rhbz#1589702) - conf: qemu: add support for Hyper-V PV TLB flush (rhbz#1589702) * Wed Sep 5 2018 Jiri Denemark - 4.5.0-9 - RHEL: Fix virConnectGetMaxVcpus output (rhbz#1582222) - storage: Add --shrink to qemu-img command when shrinking vol (rhbz#1622534) - access: Fix nwfilter-binding ACL access API name generation (rhbz#1622540) - conf: Add validation of input devices (rhbz#1591240) - tests: qemu: Remove disk from graphics-vnc-tls (rhbz#1598167) - tests: qemu: test more versions for graphics-vnc-tls (rhbz#1598167) - qemu: vnc: switch to tls-creds-x509 (rhbz#1598167) - qemu: mdev: Use vfio-pci 'display' property only with vfio-pci mdevs (rhbz#1624740) - virDomainDefCompatibleDevice: Relax alias change check (rhbz#1603133) - virDomainDetachDeviceFlags: Clarify update semantics (rhbz#1603133) - virDomainNetDefCheckABIStability: Check for MTU change too (rhbz#1623158) - RHEL: spec: Require python3-devel on RHEL-8 (rhbz#1518446) - qemu: monitor: Remove qemuMonitorJSONExtractCPUArchInfo wrapper (rhbz#1598829) - qemu: monitor: Use 'target' instead of 'arch' in reply of 'query-cpus-fast' (rhbz#1598829) * Tue Aug 21 2018 Jiri Denemark - 4.5.0-8 - tests: Add missing thread_siblings_list files (rhbz#1608479) - util: Rewrite virHostCPUCountThreadSiblings() (rhbz#1608479) - utils: Remove arbitrary limit on socket_id/core_id (rhbz#1608479) - tests: Add linux-high-ids test (rhbz#1608479) - qemu: hotplug: Fix asynchronous unplug of 'shmem' (rhbz#1618680) - tests: rename hugepages to hugepages-default (rhbz#1615461) - tests: extract hugepages-numa-default-dimm out of hugepages-numa (rhbz#1615461) - tests: rename hugepages-numa into hugepages-numa-default (rhbz#1615461) - tests: remove unnecessary XML elements from hugepages-numa-default (rhbz#1615461) - tests: extract pages-discard out of hugepages-pages (rhbz#1615461) - tests: rename hugepages-pages into hugepages-numa-nodeset (rhbz#1615461) - tests: rename hugepages-pages2 into hugepages-numa-default-2M (rhbz#1615461) - tests: extract pages-discard-hugepages out of hugepages-pages3 (rhbz#1615461) - tests: rename hugepages-pages3 into hugepages-numa-nodeset-part (rhbz#1615461) - tests: rename hugepages-pages4 into hugepages-numa-nodeset-nonexist (rhbz#1615461) - tests: rename hugepages-pages5 into hugepages-default-2M (rhbz#1615461) - tests: rename hugepages-pages6 into hugepages-default-system-size (rhbz#1615461) - tests: rename hugepages-pages7 into pages-dimm-discard (rhbz#1615461) - tests: rename hugepages-pages8 into hugepages-nodeset-nonexist (rhbz#1615461) - tests: introduce hugepages-default-1G-nodeset-2M (rhbz#1615461) - tests: introduce hugepages-nodeset (rhbz#1615461) - conf: Move hugepage XML validation check out of qemu_command (rhbz#1615461) - conf: Move hugepages validation out of XML parser (rhbz#1615461) - conf: Introduce virDomainDefPostParseMemtune (rhbz#1615461) - tests: sev: Test launch-security with specific QEMU version (rhbz#1619150) - qemu: Fix probing of AMD SEV support (rhbz#1619150) - qemu: caps: Format SEV platform data into qemuCaps cache (rhbz#1619150) - conf: Parse guestfwd channel device info again (rhbz#1610072) * Thu Aug 16 2018 Jiri Denemark - 4.5.0-7 - qemu_migration: Avoid writing to freed memory (rhbz#1615854) * Thu Aug 2 2018 Jiri Denemark - 4.5.0-6 - qemu: Exempt video model 'none' from getting a PCI address on Q35 - conf: Fix a error msg typo in virDomainVideoDefValidate * Tue Jul 31 2018 Jiri Denemark - 4.5.0-5 - esx storage: Fix typo lsilogic -> lsiLogic - networkGetDHCPLeases: Don't always report error if unable to read leases file - nwfilter: Resolve SEGV for NWFilter Snoop processing - qemu: Remove unused bypassSecurityDriver from qemuOpenFileAs - qemuDomainSaveMemory: Don't enforce dynamicOwnership - domain_nwfilter: Return early if net has no name in virDomainConfNWFilterTeardownImpl - examples: Add clean-traffic-gateway into nwfilters * Mon Jul 23 2018 Jiri Denemark - 4.5.0-4 - qemu: hotplug: don't overwrite error message in qemuDomainAttachNetDevice - qemu: hotplug: report error when changing rom enabled attr for net iface - qemu: Fix setting global_period cputune element - tests: qemucaps: Add test data for upcoming qemu 3.0.0 - qemu: capabilities: Add capability for werror/rerror for 'usb-device' frontend - qemu: command: Move graphics iteration to its own function - qemu: address: Handle all the video devices within a single loop - conf: Introduce virDomainVideoDefClear helper - conf: Introduce virDomainDefPostParseVideo helper - qemu: validate: Enforce compile time switch type checking for videos - tests: Add capabilities data for QEMU 2.11 x86_64 - tests: Update capabilities data for QEMU 3.0.0 x86_64 - qemu: qemuBuildHostdevCommandLine: Use a helper variable mdevsrc - qemu: caps: Introduce a capability for egl-headless - qemu: Introduce a new graphics display type 'headless' - qemu: caps: Add vfio-pci.display capability - conf: Introduce virDomainGraphicsDefHasOpenGL helper - conf: Replace 'error' with 'cleanup' in virDomainHostdevDefParseXMLSubsys - conf: Introduce new attribute 'display' - qemu: command: Enable formatting vfio-pci.display option onto cmdline - docs: Rephrase the mediated devices hostdev section a bit - conf: Introduce new video type 'none' - virt-xml-validate: Add schema for nwfilterbinding - tools: Fix typo generating adapter_wwpn field - src: Fix memory leak in virNWFilterBindingDispose * Mon Jul 23 2018 Jiri Denemark - 4.5.0-3 - qemu: hotplug: Do not try to add secret object for TLS if it does not exist - qemu: monitor: Make qemuMonitorAddObject more robust against programming errors - spec: Explicitly require matching libvirt-libs - virDomainConfNWFilterInstantiate: initialize @xml to avoid random crash - qemuProcessStartPRDaemonHook: Try to set NS iff domain was started with one - qemuDomainValidateStorageSource: Relax PR validation - virStoragePRDefFormat: Suppress path formatting for migratable XML - qemu: Wire up PR_MANAGER_STATUS_CHANGED event - qemu_monitor: Introduce qemuMonitorJSONGetPRManagerInfo - qemu: Fetch pr-helper process info on reconnect - qemu: Fix ATTRIBUTE_NONNULL for qemuMonitorAddObject - virsh.pod: Fix a command name typo in nwfilter-binding-undefine - docs: schema: Add missing to vsock device - virnetdevtap: Don't crash on !ifname in virNetDevTapInterfaceStats - tests: fix TLS handshake failure with TLS 1.3 * Mon Jul 9 2018 Jiri Denemark - 4.5.0-2 - qemu: Add capability for the HTM pSeries feature - conf: Parse and format the HTM pSeries feature - qemu: Format the HTM pSeries feature - qemu: hotplug: Don't access srcPriv when it's not allocated - qemuDomainNestedJobAllowed: Allow QEMU_JOB_NONE - src: Mention DEVICE_REMOVAL_FAILED event in virDomainDetachDeviceAlias docs - virsh.pod: Drop --persistent for detach-device-alias - qemu: don't use chardev FD passing with standalone args - qemu: remove chardevStdioLogd param from vhostuser code path - qemu: consolidate parameters of qemuBuildChrChardevStr into flags - qemu: don't use chardev FD passing for vhostuser backend - qemu: fix UNIX socket chardevs operating in client mode - qemuDomainDeviceDefValidateNetwork: Check for range only if IP prefix set - spec: Temporarily drop gluster support * Tue Jul 3 2018 Jiri Denemark - 4.5.0-1 - Rebased to libvirt-4.5.0 * Fri May 25 2018 Jiri Denemark - 4.3.0-1 - Rebased to libvirt-4.3.0 * Wed Mar 21 2018 Daniel P. Berrangé - 4.1.0-2 - Fix systemd macro argument with line continuations (rhbz#1558648) * Mon Mar 5 2018 Daniel Berrange - 4.1.0-1 - Rebase to version 4.1.0 * Wed Feb 07 2018 Fedora Release Engineering - 4.0.0-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_28_Mass_Rebuild * Fri Jan 19 2018 Daniel P. Berrange - 4.0.0-1 - Rebase to version 4.0.0 * Wed Dec 20 2017 Cole Robinson - 3.10.0-2 - Rebuild for xen 4.10 * Tue Dec 5 2017 Daniel P. Berrange - 3.10.0-1 - Rebase to version 3.10.0 * Fri Nov 3 2017 Daniel P. Berrange - 3.9.0-1 - Rebase to version 3.9.0 * Wed Oct 4 2017 Daniel P. Berrange - 3.8.0-1 - Rebase to version 3.8.0 * Mon Sep 4 2017 Daniel P. Berrange - 3.7.0-1 - Rebase to version 3.7.0 * Wed Aug 2 2017 Daniel P. Berrange - 3.6.0-1 - Rebase to version 3.6.0 * Sun Jul 30 2017 Florian Weimer - 3.5.0-4 - Rebuild with binutils fix for ppc64le (#1475636) * Tue Jul 25 2017 Daniel P. Berrange - 3.5.0-3 - Disabled RBD on i386, arm, ppc64 (rhbz #1474743) * Mon Jul 17 2017 Cole Robinson - 3.5.0-2 - Rebuild for xen 4.9 * Thu Jul 6 2017 Daniel P. Berrange - 3.5.0-1 - Rebase to version 3.5.0 * Fri Jun 2 2017 Daniel P. Berrange - 3.4.0-1 - Rebase to version 3.4.0 * Mon May 8 2017 Daniel P. Berrange - 3.3.0-1 - Rebase to version 3.3.0 * Mon Apr 3 2017 Daniel P. Berrange - 3.2.0-1 - Rebase to version 3.2.0 * Fri Mar 3 2017 Daniel P. Berrange - 3.1.0-1 - Rebase to version 3.1.0 * Fri Feb 10 2017 Fedora Release Engineering - 3.0.0-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_26_Mass_Rebuild * Thu Jan 19 2017 Daniel P. Berrange - 3.0.0-1 - Rebase to version 3.0.0