# -*- rpm-spec -*- # This spec file assumes you are building on a Fedora or RHEL version # that's still supported by the vendor. It may work on other distros # or versions, but no effort will be made to ensure that going forward. %define min_rhel 7 %define min_fedora 30 %if (0%{?fedora} && 0%{?fedora} >= %{min_fedora}) || (0%{?rhel} && 0%{?rhel} >= %{min_rhel}) %define supported_platform 1 %else %define supported_platform 0 %endif # Default to skipping autoreconf. Distros can change just this one line # (or provide a command-line override) if they backport any patches that # touch configure.ac or Makefile.am. # Always run autoreconf %{!?enable_autotools:%global enable_autotools 1} # The hypervisor drivers that run in libvirtd %define with_qemu 0%{!?_without_qemu:1} %define with_lxc 0%{!?_without_lxc:1} %define with_libxl 0%{!?_without_libxl:1} %define with_vbox 0%{!?_without_vbox:1} %define with_qemu_tcg %{with_qemu} %define qemu_kvm_arches %{ix86} x86_64 %if 0%{?fedora} %define qemu_kvm_arches %{ix86} x86_64 %{power64} s390x %{arm} aarch64 %endif %if 0%{?rhel} %define with_qemu_tcg 0 %define qemu_kvm_arches x86_64 %{power64} aarch64 s390x %endif # On RHEL 7 and older macro _vpath_builddir is not defined. %if 0%{?rhel} <= 7 %define _vpath_builddir %{_target_platform} %endif %ifarch %{qemu_kvm_arches} %define with_qemu_kvm %{with_qemu} %else %define with_qemu_kvm 0 %endif %if ! %{with_qemu_tcg} && ! %{with_qemu_kvm} %define with_qemu 0 %endif # Then the hypervisor drivers that run outside libvirtd, in libvirt.so %define with_openvz 0%{!?_without_openvz:1} %define with_vmware 0%{!?_without_vmware:1} %define with_esx 0%{!?_without_esx:1} %define with_hyperv 0%{!?_without_hyperv:1} # Then the secondary host drivers, which run inside libvirtd %define with_storage_rbd 0%{!?_without_storage_rbd:1} %if 0%{?fedora} %define with_storage_sheepdog 0%{!?_without_storage_sheepdog:1} %else %define with_storage_sheepdog 0 %endif %define with_storage_gluster 0%{!?_without_storage_gluster:1} %ifnarch %{qemu_kvm_arches} # gluster is only built where qemu driver is enabled on RHEL 8 %if 0%{?rhel} >= 8 %define with_storage_gluster 0 %endif %endif %define with_numactl 0%{!?_without_numactl:1} # F25+ has zfs-fuse %if 0%{?fedora} %define with_storage_zfs 0%{!?_without_storage_zfs:1} %else %define with_storage_zfs 0 %endif # We need a recent enough libiscsi (>= 1.18.0) %if 0%{?fedora} || 0%{?rhel} > 7 %define with_storage_iscsi_direct 0%{!?_without_storage_iscsi_direct:1} %else %define with_storage_iscsi_direct 0 %endif # A few optional bits off by default, we enable later %define with_fuse 0%{!?_without_fuse:0} %define with_sanlock 0%{!?_without_sanlock:0} %define with_numad 0%{!?_without_numad:0} %define with_firewalld 0%{!?_without_firewalld:0} %define with_firewalld_zone 0%{!?_without_firewalld_zone:0} %define with_libssh2 0%{!?_without_libssh2:0} %define with_wireshark 0%{!?_without_wireshark:0} %define with_libssh 0%{!?_without_libssh:0} %define with_bash_completion 0%{!?_without_bash_completion:0} # Finally set the OS / architecture specific special cases # Xen is available only on i386 x86_64 ia64 %ifnarch %{ix86} x86_64 ia64 %define with_libxl 0 %endif # vbox is available only on i386 x86_64 %ifnarch %{ix86} x86_64 %define with_vbox 0 %endif # Numactl is not available on many non-x86 archs %ifarch s390 s390x %{arm} riscv64 %define with_numactl 0 %endif # zfs-fuse is not available on some architectures %ifarch s390 s390x aarch64 riscv64 %define with_storage_zfs 0 %endif # Ceph dropping support for 32-bit hosts %if 0%{?fedora} >= 30 %ifarch %{arm} %{ix86} %define with_storage_rbd 0 %endif %endif # RHEL doesn't ship OpenVZ, VBox, PowerHypervisor, # VMware, libxenlight (Xen 4.1 and newer), # or HyperV. %if 0%{?rhel} %define with_openvz 0 %define with_vbox 0 %define with_vmware 0 %define with_libxl 0 %define with_hyperv 0 %define with_vz 0 %if 0%{?rhel} > 7 %define with_lxc 0 %endif %endif %define with_firewalld 1 %if 0%{?fedora} >= 31 || 0%{?rhel} > 7 %define with_firewalld_zone 0%{!?_without_firewalld_zone:1} %endif # fuse is used to provide virtualized /proc for LXC %if %{with_lxc} %define with_fuse 0%{!?_without_fuse:1} %endif # Enable sanlock library for lock management with QEMU # Sanlock is available only on arches where kvm is available for RHEL %if 0%{?fedora} %define with_sanlock 0%{!?_without_sanlock:1} %endif %if 0%{?rhel} %ifarch %{qemu_kvm_arches} %define with_sanlock 0%{!?_without_sanlock:1} %endif %endif # Enable libssh2 transport for new enough distros %if 0%{?fedora} %define with_libssh2 0%{!?_without_libssh2:1} %endif # Enable wireshark plugins for all distros shipping libvirt 1.2.2 or newer %if 0%{?fedora} %define with_wireshark 0%{!?_without_wireshark:1} %define wireshark_plugindir %(pkg-config --variable plugindir wireshark)/epan %endif # Enable libssh transport for new enough distros %if 0%{?fedora} || 0%{?rhel} > 7 %define with_libssh 0%{!?_without_libssh:1} %endif %define with_bash_completion 0%{!?_without_bash_completion:1} %if %{with_qemu} || %{with_lxc} # numad is used to manage the CPU and memory placement dynamically, # it's not available on many non-x86 architectures. %ifnarch s390 s390x %{arm} riscv64 %define with_numad 0%{!?_without_numad:1} %endif %endif # Force QEMU to run as non-root %define qemu_user qemu %define qemu_group qemu # RHEL releases provide stable tool chains and so it is safe to turn # compiler warning into errors without being worried about frequent # changes in reported warnings %if 0%{?rhel} %define enable_werror --enable-werror %else %define enable_werror --disable-werror %endif %if 0%{?rhel} == 7 %define tls_priority "NORMAL" %else %define tls_priority "@LIBVIRT,SYSTEM" %endif Summary: Library providing a simple virtualization API Name: libvirt Version: 6.0.0 Release: 35%{?dist}%{?extra_release} License: LGPLv2+ URL: https://libvirt.org/ %if %(echo %{version} | grep -q "\.0$"; echo $?) == 1 %define mainturl stable_updates/ %endif Source: https://libvirt.org/sources/%{?mainturl}libvirt-%{version}.tar.xz Source1: symlinks Patch1: libvirt-RHEL-Hack-around-changed-Broadwell-Haswell-CPUs.patch Patch2: libvirt-RHEL-Add-rhel-machine-types-to-qemuDomainMachineNeedsFDC.patch Patch3: libvirt-RHEL-Fix-virConnectGetMaxVcpus-output.patch Patch4: libvirt-RHEL-qemu-Add-ability-to-set-sgio-values-for-hostdev.patch Patch5: libvirt-RHEL-qemu-Add-check-for-unpriv-sgio-for-SCSI-generic-host-device.patch Patch6: libvirt-RHEL-qemu-Alter-val-usage-in-qemuSetUnprivSGIO.patch Patch7: libvirt-RHEL-qemu-Alter-qemuSetUnprivSGIO-hostdev-shareable-logic.patch Patch8: libvirt-RHEL-qemu-Fix-logic-error-in-qemuSetUnprivSGIO.patch Patch9: libvirt-RHEL-qemu-Fix-crash-trying-to-use-iSCSI-hostdev.patch Patch10: libvirt-qemuDomainSaveImageStartVM-Use-VIR_AUTOCLOSE-for-intermediatefd.patch Patch11: libvirt-qemuDomainSaveImageStartVM-Use-g_autoptr-for-virCommand.patch Patch12: libvirt-qemu-Use-g_autoptr-for-qemuDomainSaveCookie.patch Patch13: libvirt-qemu-Stop-domain-on-failed-restore.patch Patch14: libvirt-qemu-Don-t-emit-SUSPENDED_POSTCOPY-event-on-destination.patch Patch15: libvirt-util-storagefile-Properly-set-transport-type-when-parsing-NBD-strings.patch Patch16: libvirt-tests-virstorage-Add-tests-for-NBD-URI-style-syntax-over-UNIX.patch Patch17: libvirt-qemu-end-the-agent-job-in-qemuDomainSetTimeAgent.patch Patch18: libvirt-cpu.c-Check-properly-for-virCapabilitiesGetNodeInfo-retval.patch Patch19: libvirt-qemu_conf-Avoid-dereferencing-NULL-in-virQEMUDriverGetHost-NUMACaps-CPU.patch Patch20: libvirt-qemu_capabilities-Rework-domain-caps-cache.patch Patch21: libvirt-conf-add-support-for-specifying-CPU-dies-parameter.patch Patch22: libvirt-conf-remove-unused-virCapabilitiesSetHostCPU-method.patch Patch23: libvirt-qemu-add-support-for-specifying-CPU-dies-topology-parameter.patch Patch24: libvirt-hostcpu-add-support-for-reporting-die_id-in-NUMA-topology.patch Patch25: libvirt-tests-add-host-CPU-data-files-for-validating-die_id.patch Patch26: libvirt-qemu-add-capabilities-flag-for-failover-feature.patch Patch27: libvirt-conf-parse-format-teaming-subelement-of-interface.patch Patch28: libvirt-qemu-support-interface-teaming-functionality.patch Patch29: libvirt-qemu-allow-migration-with-assigned-PCI-hostdev-if-teaming-is-set.patch Patch30: libvirt-qemu-add-wait-unplug-to-qemu-migration-status-enum.patch Patch31: libvirt-docs-document-interface-subelement-teaming.patch Patch32: libvirt-qemu-blockcopy-Actually-unplug-unused-images-when-mirror-job-fails-to-start.patch Patch33: libvirt-qemu-domain-Extract-code-to-determine-topmost-nodename-to-qemuDomainDiskGetTopNodename.patch Patch34: libvirt-qemu-Fix-value-of-device-argument-for-blockdev-mirror.patch Patch35: libvirt-qemu-Fix-value-of-device-argument-for-block-commit.patch Patch36: libvirt-conf-backup-Allow-configuration-of-names-exported-via-NBD.patch Patch37: libvirt-qemu-backup-Implement-support-for-backup-disk-export-name-configuration.patch Patch38: libvirt-qemu-backup-Implement-support-for-backup-disk-bitmap-name-configuration.patch Patch39: libvirt-util-hash-Improve-debugability-of-Duplicate-key-error-message.patch Patch40: libvirt-tests-hash-Test-case-for-adding-duplicate-hash-entry.patch Patch41: libvirt-qemu-block-Don-t-skip-creation-of-luks-formatted-images.patch Patch42: libvirt-qemu-monitor-Improve-error-message-when-QEMU-reply-is-too-large.patch Patch43: libvirt-qemu-snapshot-Always-rewrite-backingStore-data-when-reusing-existing-images.patch Patch44: libvirt-qemu-snapshot-Prevent-too-nested-domain-XML-when-doing-inactive-snapshot.patch Patch45: libvirt-qemu-checkpoint-Store-whether-deleted-checkpoint-is-current-in-a-variable.patch Patch46: libvirt-qemu-checkpoint-split-out-checkpoint-deletion-bitmaps.patch Patch47: libvirt-qemu-checkpoint-rename-disk-chkdisk-in-qemuCheckpointDiscardBitmaps.patch Patch48: libvirt-qemu-checkpoint-rename-disk-chkdisk-in-qemuCheckpointAddActions.patch Patch49: libvirt-qemu-checkpoint-Use-disk-definition-directly-when-creating-checkpoint.patch Patch50: libvirt-qemu-checkpoint-tolerate-missing-disks-on-checkpoint-deletion.patch Patch51: libvirt-qemu-domain-Remove-unused-qemuDomainDiskNodeFormatLookup.patch Patch52: libvirt-qemu-checkpoint-Introduce-helper-to-find-checkpoint-disk-definition-in-parents.patch Patch53: libvirt-qemu-checkpoint-Extract-calculation-of-bitmap-merging-for-checkpoint-deletion.patch Patch54: libvirt-qemu-snapshot-go-through-cleanup-on-error.patch Patch55: libvirt-util-hash-Use-g_new0-for-allocating-hash-internals.patch Patch56: libvirt-conf-domain-Remove-checking-of-return-value-of-virHashCreateFull.patch Patch57: libvirt-Remove-checking-of-return-value-of-virHashNew.patch Patch58: libvirt-qemuMigrationCookieAddNBD-Exit-early-if-there-are-no-disks.patch Patch59: libvirt-qemuMigrationCookieNBD-Extract-embedded-struct.patch Patch60: libvirt-qemuMigrationCookieAddNBD-Use-glib-memory-allocators.patch Patch61: libvirt-qemuMigrationCookieAddNBD-Move-monitor-call-out-of-the-loop.patch Patch62: libvirt-qemuMigrationCookieAddNBD-Use-virHashNew-and-automatic-freeing-of-virHashTablePtr.patch Patch63: libvirt-qemuMigrationCookieAddNBD-Remove-ret-variable-and-cleanup-label.patch Patch64: libvirt-qemuMigrationCookieAddNBD-Fix-filling-of-capacity-when-blockdev-is-used.patch Patch65: libvirt-tests-qemublock-Add-test-for-checkpoint-deletion-bitmap-merge.patch Patch66: libvirt-tests-qemublock-Add-few-more-test-cases-for-checkpoint-deletion.patch Patch67: libvirt-tests-qemublock-Add-synthetic-snapshot-checkpoint-test-data.patch Patch68: libvirt-qemu-checkpoint-Introduce-support-for-deleting-checkpoints-accross-snapshots.patch Patch69: libvirt-tests-qemublock-Add-checkpoint-deletion-test-for-deep-backing-chain.patch Patch70: libvirt-tests-qemublock-Add-checkpoint-deletion-tests-for-some-special-cases.patch Patch71: libvirt-qemu-checkpoint-Track-and-relabel-images-for-bitmap-merging.patch Patch72: libvirt-qemu-block-Extract-calls-of-qemuBlockGetNamedNodeData-into-a-helper-function.patch Patch73: libvirt-util-json-Introduce-virJSONValueArrayConcat.patch Patch74: libvirt-virJSONValueNewArray-Use-g_new0-to-allocate-and-remove-NULL-checks-from-callers.patch Patch75: libvirt-virhash-Fix-the-expectations-of-virHashKeyEqual-implementations.patch Patch76: libvirt-virHashAddOrUpdateEntry-Simplify-allocation-of-new-entry.patch Patch77: libvirt-qemu-blockjob-Store-jobflags-with-block-job-data.patch Patch78: libvirt-qemu-blockjob-Store-flags-for-all-the-block-job-types.patch Patch79: libvirt-qemu-block-Add-validator-for-bitmap-chains-accross-backing-chains.patch Patch80: libvirt-tests-qemublocktest-Add-another-synthetic-test-case-for-broken-bitmaps.patch Patch81: libvirt-qemu-block-Introduce-function-to-calculate-bitmap-handling-for-block-copy.patch Patch82: libvirt-tests-qemublock-Add-tests-for-qemuBlockBitmapsHandleBlockcopy.patch Patch83: libvirt-qemuDomainBlockPivot-Copy-bitmaps-backing-checkpoints-for-virDomainBlockCopy.patch Patch84: libvirt-docs-domaincaps-Mention-VIR_DOMAIN_UNDEFINE_CHECKPOINTS_METADATA.patch Patch85: libvirt-qemu-do-not-revert-to-NULL-bandwidth.patch Patch86: libvirt-qemu-preserve-error-on-bandwidth-rollback.patch Patch87: libvirt-tests-Add-capabilities-for-QEMU-5.0.0-on-aarch64.patch Patch88: libvirt-qemu-Use-switch-statement-in-qemuBuildCpuCommandLine.patch Patch89: libvirt-qemu-Add-the-QEMU_CAPS_CPU_KVM_NO_ADJVTIME-capability.patch Patch90: libvirt-conf-Introduce-VIR_DOMAIN_TIMER_NAME_ARMVTIMER.patch Patch91: libvirt-qemu-Validate-configuration-for-the-armvtimer-timer.patch Patch92: libvirt-qemu-Format-the-armvtimer-timer-on-the-command-line.patch Patch93: libvirt-tests-Add-test-case-for-the-armvtimer-timer.patch Patch94: libvirt-docs-List-the-armvtimer-timer-among-all-others.patch Patch95: libvirt-qemu_domain-Modify-access-to-a-NVMe-disk-iff-needed.patch Patch96: libvirt-qemuBlockStorageSourceGetBackendProps-Report-errors-on-all-switch-cases.patch Patch97: libvirt-virDomainDiskAddISCSIPoolSourceHost-Sanitize-handling-of-string-list.patch Patch98: libvirt-virDomainDiskAddISCSIPoolSourceHost-use-g_new0-instead-of-VIR_ALLOC_N.patch Patch99: libvirt-virDomainDiskAddISCSIPoolSourceHost-Remove-cleanup-label.patch Patch100: libvirt-virDomainDiskAddISCSIPoolSourceHost-Remove-ternary-operator.patch Patch101: libvirt-virDomainDiskAddISCSIPoolSourceHost-Take-virStorageSourcePtr-instead-of-virDomainDiskDefPtr.patch Patch102: libvirt-virDomainDiskTranslateSourcePoolAuth-Take-virStorageSourcePtr-instead-of-virDomainDiskDefPtr.patch Patch103: libvirt-virDomainDiskTranslateISCSIDirect-Take-virStorageSourcePtr-instead-of-virDomainDiskDefPtr.patch Patch104: libvirt-virDomainDiskTranslateSourcePool-split-code-to-setup-one-storage-source.patch Patch105: libvirt-virDomainDiskTranslateSourcePool-Translate-volume-disks-in-whole-backing-chain.patch Patch106: libvirt-qemuMonitorJSONBlockdevAdd-Refactor-cleanup.patch Patch107: libvirt-qemuMonitorJSONBlockdevDel-Refactor-cleanup.patch Patch108: libvirt-qemuMonitorBlockdevAdd-Take-double-pointer-argument.patch Patch109: libvirt-qemu-hotplug-Fix-handling-of-the-copy-on-read-layer-with-blockdev.patch Patch110: libvirt-virStorageSourceParseBackingJSON-Pass-around-original-backing-file-string.patch Patch111: libvirt-virStorageSourceParseBackingJSON-Move-deflattening-of-json-URIs-out-of-recursion.patch Patch112: libvirt-virStorageSourceJSONDriverParser-annotate-format-drivers.patch Patch113: libvirt-virStorageSourceParseBackingJSON-Allow-json-pseudo-URIs-without-file-wrapper.patch Patch114: libvirt-virStorageSourceParseBackingJSON-Prevent-arbitrary-nesting-with-format-drivers.patch Patch115: libvirt-tests-virstorage-Add-test-cases-for-json-pseudo-URI-without-file-wrapper.patch Patch116: libvirt-qemu-domain-Refactor-formatting-of-node-names-into-status-XML.patch Patch117: libvirt-docs-formatdomain-Close-source-on-one-of-disk-examples.patch Patch118: libvirt-tests-virstorage-Add-test-data-for-json-specified-raw-image-with-offset-size.patch Patch119: libvirt-util-virstoragefile-Add-data-structure-for-storing-storage-source-slices.patch Patch120: libvirt-qemuBlockStorageSourceGetFormatRawProps-format-offset-and-size-for-slice.patch Patch121: libvirt-qemuDomainValidateStorageSource-Reject-unsupported-slices.patch Patch122: libvirt-qemu-block-forbid-creation-of-storage-sources-with-slice.patch Patch123: libvirt-docs-Document-the-new-slices-sub-element-of-disk-s-source.patch Patch124: libvirt-conf-Implement-support-for-slices-of-disk-source.patch Patch125: libvirt-qemu-domain-Store-nodenames-of-slice-in-status-XML.patch Patch126: libvirt-qemu-block-Properly-format-storage-slice-into-backing-store-strings.patch Patch127: libvirt-tests-qemublock-Add-cases-for-creating-image-overlays-on-top-of-disks-with-slice.patch Patch128: libvirt-qemu-Add-support-for-slices-of-type-storage.patch Patch129: libvirt-tests-qemu-Add-test-data-for-the-new-slice-element.patch Patch130: libvirt-virStorageSourceParseBackingJSONRaw-Parse-offset-and-size-attributes.patch Patch131: libvirt-qemuDomainGetStatsIOThread-Don-t-leak-array-with-0-iothreads.patch Patch132: libvirt-qemuxml2xmltest-Add-case-for-host-model-vendor_id.patch Patch133: libvirt-cpu_conf-Format-vendor_id-for-host-model-CPUs.patch Patch134: libvirt-qemu-rename-qemuAgentGetFSInfoInternalDisk.patch Patch135: libvirt-qemu-store-complete-agent-filesystem-information.patch Patch136: libvirt-qemu-Don-t-store-disk-alias-in-qemuAgentDiskInfo.patch Patch137: libvirt-qemu-don-t-access-vmdef-within-qemu_agent.c.patch Patch138: libvirt-qemu-remove-qemuDomainObjBegin-EndJobWithAgent.patch Patch139: libvirt-docs-fix-a-typo.patch Patch140: libvirt-virDomainNetDefClear-Free-persistent-name.patch Patch141: libvirt-virSecurityManagerMetadataLock-Store-locked-paths.patch Patch142: libvirt-security-Don-t-remember-seclabel-for-paths-we-haven-t-locked-successfully.patch Patch143: libvirt-security-Don-t-fail-if-locking-a-file-on-NFS-mount-fails.patch Patch144: libvirt-util-storagefile-Drop-image-format-probing-by-file-suffix.patch Patch145: libvirt-virStorageFileGetMetadataRecurse-Remove-impossible-error-report.patch Patch146: libvirt-virStorageFileGetMetadataRecurse-Shuffle-around-assignment-of-backing-chain-depth.patch Patch147: libvirt-virStorageFileGetMetadataRecurse-Expect-NULL-src-path.patch Patch148: libvirt-virStorageFileGetMetadataRecurse-Use-virHashHasEntry-instead-of-fake-pointers.patch Patch149: libvirt-virStorageFileGetMetadataRecurse-Extract-storage-access.patch Patch150: libvirt-virStorageFileGetMetadataRecurse-Remove-cleanup-label.patch Patch151: libvirt-tests-virstorage-Fix-backing-file-format-of-created-image.patch Patch152: libvirt-virStorageSourceUpdateCapacity-Drop-probe-argument.patch Patch153: libvirt-util-storage-Store-backing-store-format-in-virStorageSource.patch Patch154: libvirt-virStorageSourceNewFromBacking-Also-transfer-the-format.patch Patch155: libvirt-virStorageBackendGlusterRefreshVol-Refactor-handling-of-backing-store.patch Patch156: libvirt-virStorageFileGetMetadataFromBuf-Remove-backingFormat-argument.patch Patch157: libvirt-virStorageFileGetMetadataFromFD-Remove-unused-backingFormat-argument.patch Patch158: libvirt-qemu-domain-Convert-detected-iso-image-format-into-raw.patch Patch159: libvirt-virStorageFileGetMetadataRecurse-Allow-format-probing-under-special-circumstances.patch Patch160: libvirt-kbase-backing_chains-Clarify-some-aspects-of-image-probing.patch Patch161: libvirt-kbase-backing_chains-Add-steps-how-to-securely-probe-image-format.patch Patch162: libvirt-conf-use-virXMLFormatElement-in-virDomainFSDefFormat.patch Patch163: libvirt-qemu-use-def-instead-of-vm-def-in-qemuExtDevicesStart.patch Patch164: libvirt-qemu-eliminate-ret-in-qemuExtDevicesStart.patch Patch165: libvirt-docs-render-class-literal-with-monospace-font.patch Patch166: libvirt-docs-reduce-excessive-spacing-in-ToC-for-RST-files.patch Patch167: libvirt-virDomainFSDefFree-Unref-private-data.patch Patch168: libvirt-schema-wrap-fsDriver-in-a-choice-group.patch Patch169: libvirt-qemuExtDevicesStart-pass-logManager.patch Patch170: libvirt-qemu-pass-virDomainObjPtr-to-qemuExtDevicesSetupCgroup.patch Patch171: libvirt-qemuxml2xmltest-set-driver-as-privileged.patch Patch172: libvirt-qemu-add-QEMU_CAPS_DEVICE_VHOST_USER_FS.patch Patch173: libvirt-docs-add-virtiofs-kbase.patch Patch174: libvirt-conf-qemu-add-virtiofs-fsdriver-type.patch Patch175: libvirt-conf-add-virtiofs-related-elements-and-attributes.patch Patch176: libvirt-qemu-add-virtiofsd_debug-to-qemu.conf.patch Patch177: libvirt-qemu-validate-virtiofs-filesystems.patch Patch178: libvirt-qemu-forbid-migration-with-vhost-user-fs-device.patch Patch179: libvirt-qemu-add-code-for-handling-virtiofsd.patch Patch180: libvirt-qemu-put-virtiofsd-in-the-emulator-cgroup.patch Patch181: libvirt-qemu-use-the-vhost-user-schemas-to-find-binary.patch Patch182: libvirt-qemu-build-vhost-user-fs-device-command-line.patch Patch183: libvirt-RHEL-virscsi-Check-device-type-before-getting-it-s-dev-node-name.patch Patch184: libvirt-RHEL-virscsi-Support-TAPEs-in-virSCSIDeviceGetDevName.patch Patch185: libvirt-RHEL-virscsi-Introduce-and-use-virSCSIDeviceGetUnprivSGIOSysfsPath.patch Patch186: libvirt-RHEL-virutil-Accept-non-block-devices-in-virGetDeviceID.patch Patch187: libvirt-RHEL-qemuSetUnprivSGIO-Actually-use-calculated-sysfs_path-to-set-unpriv_sgio.patch Patch188: libvirt-RHEL-qemuCheckUnprivSGIO-use-sysfs_path-to-get-unpriv_sgio.patch Patch189: libvirt-security-Introduce-VIR_SECURITY_DOMAIN_IMAGE_PARENT_CHAIN_TOP-flag.patch Patch190: libvirt-qemu-Tell-secdrivers-which-images-are-top-parent.patch Patch191: libvirt-virDomainDiskTranslateSourcePool-Check-for-disk-type-correctly.patch Patch192: libvirt-virbuftest-remove-extra-G_GNUC_UNUSED-markers.patch Patch193: libvirt-virbuftest-use-g_autofree.patch Patch194: libvirt-virbuftest-remove-unnecessary-labels.patch Patch195: libvirt-virbuftest-declare-testBufAddStrData-earlier.patch Patch196: libvirt-virbuftest-use-field-names-when-initalizing-test-info.patch Patch197: libvirt-util-add-virBufferTrimChars.patch Patch198: libvirt-conf-do-not-generate-machine-names-ending-with-a-dash.patch Patch199: libvirt-conf-Don-t-generate-machine-names-with-a-dot.patch Patch200: libvirt-qemuAgentFSInfoFormatParams-Remove-pointless-returned-value.patch Patch201: libvirt-qemuDomainGetGuestInfo-Don-t-try-to-free-a-negative-number-of-entries.patch Patch202: libvirt-qemuDomainBlockPivot-Move-check-prior-to-executing-the-pivot-steps.patch Patch203: libvirt-qemuDomainBlockCopyCommon-Record-updated-flags-to-block-job.patch Patch204: libvirt-qemu-capabilities-Introduce-QEMU_CAPS_BLOCKDEV_SNAPSHOT_ALLOW_WRITE_ONLY.patch Patch205: libvirt-qemu-blockcopy-Allow-late-opening-of-the-backing-chain-of-a-shallow-copy.patch Patch206: libvirt-qemuBlockStorageSourceDetachPrepare-Get-rid-of-cleanup-section.patch Patch207: libvirt-qemu-Don-t-take-double-pointer-in-qemuDomainSecretInfoFree.patch Patch208: libvirt-qemuMigrationParamsResetTLS-Adapt-to-modern-memory-management.patch Patch209: libvirt-qemuMigrationParamsResetTLS-Fix-comment.patch Patch210: libvirt-qemuDomainSecretInfo-Register-autoptr-cleanup-function.patch Patch211: libvirt-qemuDomainSecretAESSetup-Automatically-free-non-secret-locals.patch Patch212: libvirt-qemuDomainSecretAESSetup-Allocate-and-return-secinfo-here.patch Patch213: libvirt-qemuDomainSecretAESSetup-Split-out-lookup-of-secret-data.patch Patch214: libvirt-Remove-qemuDomainSecretInfoNew.patch Patch215: libvirt-qemu-Introduce-another-helper-for-creating-alias-for-a-secret-object.patch Patch216: libvirt-qemuDomainSecretStorageSourcePrepare-Fix-naming-of-alias-variables.patch Patch217: libvirt-qemuDomainDeviceDiskDefPostParseRestoreSecAlias-Hardcode-restored-aliases.patch Patch218: libvirt-qemu-Split-out-initialization-of-secrets-for-iscsi-hostdevs.patch Patch219: libvirt-qemuDomainSecretAESSetupFromSecret-Use-qemuAliasForSecret.patch Patch220: libvirt-qemuDomainSecretStorageSourcePrepare-Change-aliases-for-disk-secrets.patch Patch221: libvirt-qemuDomainGetSecretAESAlias-Replace-outstanding-uses-with-qemuAliasForSecret.patch Patch222: libvirt-conf-Add-support-for-modifying-ssl-validation-for-https-ftps-disks.patch Patch223: libvirt-conf-Add-support-for-cookies-for-HTTP-based-disks.patch Patch224: libvirt-conf-Add-support-for-setting-timeout-and-readahead-size-for-network-disks.patch Patch225: libvirt-qemuDomainValidateStorageSource-Validate-new-network-storage-parameters.patch Patch226: libvirt-qemuxml2argvtest-Add-test-case-for-disks-with-http-s-source.patch Patch227: libvirt-qemu-block-Implement-ssl-verification-configuration.patch Patch228: libvirt-qemu-domain-Store-data-for-secret-object-representing-http-cookies.patch Patch229: libvirt-qemuDomainSecretStorageSourcePrepare-Setup-secret-for-http-cookies.patch Patch230: libvirt-qemu-Handle-hotplug-and-commandline-for-secret-objects-for-http-cookies.patch Patch231: libvirt-qemu-block-Add-support-for-HTTP-cookies.patch Patch232: libvirt-qemu-block-Implement-readahead-and-timeout-properties-for-curl-driver.patch Patch233: libvirt-virstoragefile-Add-JSON-parser-for-sslverify-readahead-cookies-and-timeout.patch Patch234: libvirt-virStorageSourceParseBackingJSONUri-Handle-undocumented-value-off-for-sslverify.patch Patch235: libvirt-qemublocktest-Load-QMP-schema-earlier.patch Patch236: libvirt-qemublocktest-Extract-schema-root-for-blockdev-add-validation.patch Patch237: libvirt-qemublocktest-XMLjsonXML-Test-formatting-parsing-of-modern-JSON.patch Patch238: libvirt-qemublocktest-Add-JSON-JSON-test-cases-for-block-device-backends.patch Patch239: libvirt-qemu-Pass-through-arguments-of-ssh-block-driver-used-by-libguestfs.patch Patch240: libvirt-qemu-capabilities-Add-QEMU_CAPS_BLOCKDEV_REOPEN.patch Patch241: libvirt-qemu-monitor-Add-handler-for-blockdev-reopen.patch Patch242: libvirt-qemu-block-implement-helpers-for-blockdev-reopen.patch Patch243: libvirt-qemuCheckpointDiscardBitmaps-Reopen-images-for-bitmap-modifications.patch Patch244: libvirt-qemuCheckpointDiscardBitmaps-Use-correct-field-for-checkpoint-bitmap-name.patch Patch245: libvirt-qemuDomainBlockCommit-Move-checks-depending-on-capabilities-after-liveness-check.patch Patch246: libvirt-qemu-domain-Extract-formatting-of-commit-blockjob-data-into-a-function.patch Patch247: libvirt-qemu-domain-Extract-parsing-of-commit-blockjob-data-into-a-function.patch Patch248: libvirt-qemu-blockjob-Store-list-of-bitmaps-disabled-prior-to-commit.patch Patch249: libvirt-qemublocktest-Fix-and-optimize-fake-image-chain.patch Patch250: libvirt-qemu-block-Implement-helpers-for-dealing-with-bitmaps-during-block-commit.patch Patch251: libvirt-qemublocktest-Add-tests-for-handling-of-bitmaps-during-block-commit.patch Patch252: libvirt-qemublocktest-Add-more-tests-for-block-commit-bitmap-handling-with-snapshots.patch Patch253: libvirt-qemublocktest-Add-tests-of-broken-bitmap-chain-handling-during-block-commit.patch Patch254: libvirt-qemuBlockJobDiskNewCommit-Propagate-disabledBitmapsBase.patch Patch255: libvirt-qemuDomainBlockCommit-Handle-bitmaps-on-start-of-commit.patch Patch256: libvirt-qemuDomainBlockPivot-Handle-merging-of-bitmaps-when-pivoting-an-active-block-commit.patch Patch257: libvirt-qemu-blockjob-Handle-bitmaps-after-finish-of-normal-block-commit.patch Patch258: libvirt-qemu-blockjob-Re-enable-bitmaps-after-failed-block-commit.patch Patch259: libvirt-qemuDomainGetGuestInfo-don-t-assign-NULL-hostname.patch Patch260: libvirt-rhel-Enable-usage-of-x-blockdev-reopen.patch Patch261: libvirt-qemuBlockBitmapsHandleCommitStart-Fix-allocation-of-string-list.patch Patch262: libvirt-qemuBlockBitmapsHandleCommitFinish-Use-proper-variable-to-iterate.patch Patch263: libvirt-qemublocktest-Add-tests-for-re-enabling-of-bitmaps-after-commit.patch Patch264: libvirt-qemu-Create-multipath-targets-for-PRs.patch Patch265: libvirt-qemu-Don-t-crash-when-getting-targets-for-a-multipath.patch Patch266: libvirt-virSecretLookupDefCopy-Remove-return-value.patch Patch267: libvirt-virStorageEncryptionSecretCopy-Properly-copy-internals.patch Patch268: libvirt-vmx-shortcut-earlier-few-ignore-cases-in-virVMXParseDisk.patch Patch269: libvirt-vmx-make-fileName-optional-for-CD-ROMs.patch Patch270: libvirt-qemublocktest-Backport-cleanups-for-testQemuDiskXMLToProps-from-dd94f36ffbe.patch Patch271: libvirt-conf-rename-namespace-property-of-struct-_virStorageSourceNVMeDef.patch Patch272: libvirt-qemublocktest-xml-json-Add-test-for-NVMe.patch Patch273: libvirt-virDomainDiskSourceNVMeFormat-Format-only-valid-managed-values.patch Patch274: libvirt-qemublocktest-xml-json-Refactor-cleanup-in-test-case-functions.patch Patch275: libvirt-testQemuDiskXMLToPropsValidateFileSrcOnly-Move-together-with-rest-of-xml-json-code.patch Patch276: libvirt-qemuBlockGetBackingStoreString-Add-pretty-argument.patch Patch277: libvirt-testQemuDiskXMLToProps-Store-all-per-image-data-in-one-structure.patch Patch278: libvirt-qemublocktest-Test-backing-store-strings.patch Patch279: libvirt-qemuBlockGetBackingStoreString-Remove-ret-variable.patch Patch280: libvirt-storage-Implement-backing-store-support-for-fat-prefix.patch Patch281: libvirt-qemuBlockGetBackingStoreString-Add-extra-wrapping-object-to-JSON-strings.patch Patch282: libvirt-qemu-block-Extract-formatting-of-cookie-string.patch Patch283: libvirt-qemuBlockGetBackingStoreString-Properly-handle-http-s-with-cookies-and-others.patch Patch284: libvirt-storage-Parse-nvme-disk-source-properties-from-json-pseudo-uri.patch Patch285: libvirt-qemu-virtiofs-shorten-pid-filename.patch Patch286: libvirt-qemu-virtiofs-shorten-socket-filename.patch Patch287: libvirt-api-disallow-virDomainAgentSetResponseTimeout-on-read-only-connections.patch Patch288: libvirt-qemuBackupBegin-Fix-monitor-access-when-rolling-back-due-to-failure.patch Patch289: libvirt-qemuxml2xmltest-Wire-up-disk-network-http-case.patch Patch290: libvirt-virStorageSourceNetCookieValidate-Accept-quoted-cookie-value.patch Patch291: libvirt-qemu-block-Support-VIR_DOMAIN_BLOCK_COMMIT-PULL-REBASE_RELATIVE-with-blockdev.patch Patch292: libvirt-qemuDomainSnapshotDiskPrepareOne-Don-t-load-the-relative-path-with-blockdev.patch Patch293: libvirt-docs-formatdomain-Mention-missing-protocols.patch Patch294: libvirt-schemas-rng-Use-interleave-in-the-disk-source-element.patch Patch295: libvirt-conf-Add-support-for-http-s-query-strings.patch Patch296: libvirt-qemuBlockStorageSourceGetURI-Pass-through-query-component.patch Patch297: libvirt-virStorageSourceParseBackingURI-Preserve-query-string-of-URI-for-http-s.patch Patch298: libvirt-qemuDomainSnapshotDiskPrepareOne-Fix-logic-of-relative-backing-store-update.patch Patch299: libvirt-qemuCheckpointCreateXML-Check-VM-liveness-first.patch Patch300: libvirt-qemu-checkpoint-Allow-checkpoint-redefine-for-offline-VMs.patch Patch301: libvirt-virDomainCheckpointRedefinePrep-Set-current-checkpoint-if-there-isn-t-any.patch Patch302: libvirt-qemu-avoid-launching-non-x86-guests-with-APIC-EOI-setting.patch Patch303: libvirt-tests-qemu-add-disk-error-policy-tests-for-s390x.patch Patch304: libvirt-qemu-add-QEMU_CAPS_STORAGE_WERROR.patch Patch305: libvirt-qemu-use-QEMU_CAPS_STORAGE_WERROR-for-disk-error-attributes.patch Patch306: libvirt-qemuMonitorTestProcessCommandDefaultValidate-Output-validator-output-to-stderr.patch Patch307: libvirt-qemumonitorjsontest-AddNetdev-Use-real-variant.patch Patch308: libvirt-qemu-new-capabilities-flag-pcie-root-port.hotplug.patch Patch309: libvirt-conf-new-attribute-hotplug-for-pci-controllers.patch Patch310: libvirt-qemu-hook-up-pcie-root-port-hotplug-off-option.patch Patch311: libvirt-docs-mention-hotplug-off-in-news.xml.patch Patch312: libvirt-conf-add-new-PCI_CONNECT-flag-AUTOASSIGN.patch Patch313: libvirt-conf-qemu-s-VIR_PCI_CONNECT_HOTPLUGGABLE-VIR_PCI_CONNECT_AUTOASSIGN-g.patch Patch314: libvirt-conf-simplify-logic-when-checking-for-AUTOASSIGN-PCI-addresses.patch Patch315: libvirt-qemu-conf-set-HOTPLUGGABLE-connect-flag-during-PCI-address-set-init.patch Patch316: libvirt-conf-check-HOTPLUGGABLE-connect-flag-when-validating-a-PCI-address.patch Patch317: libvirt-conf-during-PCI-hotplug-require-that-the-controller-support-hotplug.patch Patch318: libvirt-qemu-fix-detection-of-vCPU-pids-when-multiple-dies-are-present.patch Patch319: libvirt-storage_file-create-Create-new-images-with-write-permission-bit.patch Patch320: libvirt-qemuBlockStorageSourceCreateFormat-Force-write-access-when-formatting-images.patch Patch321: libvirt-qemu-snapshot-Allow-snapshots-of-read-only-disks-when-we-can-create-them.patch Patch322: libvirt-qemu-blockcopy-Allow-copy-of-read-only-disks-with-blockdev.patch Patch323: libvirt-virDevMapperGetTargetsImpl-quit-early-if-device-is-not-a-devmapper-target.patch Patch324: libvirt-qemu-only-stop-external-devices-after-the-domain.patch Patch325: libvirt-qemu-fixing-auto-detecting-binary-in-domain-capabilities.patch Patch326: libvirt-qemu-prevent-attempts-to-detach-a-device-on-a-controller-with-hotplug-off.patch Patch327: libvirt-cpu-Change-control-flow-in-virCPUUpdateLive.patch Patch328: libvirt-cpu_x86-Prepare-virCPUx86UpdateLive-for-easier-extension.patch Patch329: libvirt-cpu-Honor-check-full-for-host-passthrough-CPUs.patch Patch330: libvirt-cputest-Add-data-for-Intel-R-Core-TM-i7-8550U-CPU-without-TSX.patch Patch331: libvirt-cpu_map-Add-more-noTSX-x86-CPU-models.patch Patch332: libvirt-cpu_map-Add-decode-element-to-x86-CPU-model-definitions.patch Patch333: libvirt-cpu_x86-Honor-CPU-models-decode-element.patch Patch334: libvirt-cpu_map-Don-t-use-new-noTSX-models-for-host-model-CPUs.patch Patch335: libvirt-cpu_x86-Drop-noTSX-hint-for-incompatible-CPUs.patch Patch336: libvirt-cpu_x86-Use-glib-allocation-for-virCPU-x86-Data.patch Patch337: libvirt-cpu_x86-Use-glib-allocation-for-virCPUx86Vendor.patch Patch338: libvirt-cpu_x86-Use-glib-allocation-for-virCPUx86Feature.patch Patch339: libvirt-cpu_x86-Use-glib-allocation-for-virCPUx86Model.patch Patch340: libvirt-cpu_x86-Use-glib-allocation-for-virCPUx86Map.patch Patch341: libvirt-cpu_x86-Use-glib-allocation-in-virCPUx86GetModels.patch Patch342: libvirt-cpu_x86-Use-g_auto-in-x86DataToCPU.patch Patch343: libvirt-cpu_x86-Use-g_auto-in-x86VendorParse.patch Patch344: libvirt-cpu_x86-Use-g_auto-in-x86FeatureParse.patch Patch345: libvirt-cpu_x86-Use-g_auto-in-x86ModelFromCPU.patch Patch346: libvirt-cpu_x86-Use-g_auto-in-x86ModelParse.patch Patch347: libvirt-cpu_x86-Use-g_auto-in-virCPUx86LoadMap.patch Patch348: libvirt-cpu_x86-Use-g_auto-in-virCPUx86DataParse.patch Patch349: libvirt-cpu_x86-Use-g_auto-in-x86Compute.patch Patch350: libvirt-cpu_x86-Use-g_auto-in-virCPUx86Compare.patch Patch351: libvirt-cpu_x86-Use-g_auto-in-x86Decode.patch Patch352: libvirt-cpu_x86-Use-g_auto-in-x86EncodePolicy.patch Patch353: libvirt-cpu_x86-Use-g_auto-in-x86Encode.patch Patch354: libvirt-cpu_x86-Use-g_auto-in-virCPUx86CheckFeature.patch Patch355: libvirt-cpu_x86-Use-g_auto-in-virCPUx86GetHost.patch Patch356: libvirt-cpu_x86-Use-g_auto-in-virCPUx86Baseline.patch Patch357: libvirt-cpu_x86-Use-g_auto-in-x86UpdateHostModel.patch Patch358: libvirt-cpu_x86-Use-g_auto-in-virCPUx86Update.patch Patch359: libvirt-cpu_x86-Use-g_auto-in-virCPUx86UpdateLive.patch Patch360: libvirt-cpu_x86-Use-g_auto-in-virCPUx86Translate.patch Patch361: libvirt-cpu_x86-Use-g_auto-in-virCPUx86ExpandFeatures.patch Patch362: libvirt-cpu_x86-Use-g_auto-in-virCPUx86CopyMigratable.patch Patch363: libvirt-cpu_x86-Move-and-rename-x86ModelCopySignatures.patch Patch364: libvirt-cpu_x86-Move-and-rename-x86ModelHasSignature.patch Patch365: libvirt-cpu_x86-Move-and-rename-x86FormatSignatures.patch Patch366: libvirt-cpu_x86-Introduce-virCPUx86SignaturesFree.patch Patch367: libvirt-cpu_x86-Introduce-virCPUx86SignatureFromCPUID.patch Patch368: libvirt-cpu_x86-Replace-32b-signatures-in-virCPUx86Model-with-a-struct.patch Patch369: libvirt-cpu_x86-Don-t-check-return-value-of-x86ModelCopy.patch Patch370: libvirt-cpu_x86-Add-support-for-stepping-part-of-CPU-signature.patch Patch371: libvirt-cputest-Add-data-for-Intel-R-Xeon-R-Platinum-9242-CPU.patch Patch372: libvirt-cputest-Add-data-for-Intel-R-Xeon-R-Gold-6130-CPU.patch Patch373: libvirt-cpu_map-Distinguish-Cascadelake-Server-from-Skylake-Server.patch Patch374: libvirt-cputest-Add-data-for-Cooperlake-CPU.patch Patch375: libvirt-cpu_map-Add-pschange-mc-no-bit-in-IA32_ARCH_CAPABILITIES-MSR.patch Patch376: libvirt-cpu_map-Add-Cooperlake-x86-CPU-model.patch Patch377: libvirt-cpu_map-Distribute-x86_Cooperlake.xml.patch Patch378: libvirt-qemu-Refuse-to-use-ps2-on-machines-that-do-not-have-this-bus.patch Patch379: libvirt-nodedev-fix-race-in-API-usage-vs-initial-device-enumeration.patch Patch380: libvirt-qemu-backup-Fix-handling-of-backing-store-for-backup-target-images.patch Patch381: libvirt-qemu-backup-Split-up-code-traversing-checkpoint-list-looking-for-bitmaps.patch Patch382: libvirt-qemu-backup-Fix-backup-of-disk-skipped-in-an-intermediate-checkpoint.patch Patch383: libvirt-conf-backup-Store-incremental-backup-checkpoint-name-per-disk.patch Patch384: libvirt-qemu-backup-Move-fetching-of-checkpoint-list-for-incremental-backup.patch Patch385: libvirt-qemublocktest-Add-empty-test-case-for-bitmaps.patch Patch386: libvirt-qemublocktest-Add-empty-case-for-incremental-backup-test.patch Patch387: libvirt-qemublocktest-Add-empty-case-for-checkpoint-deletion.patch Patch388: libvirt-qemublocktest-Add-empty-case-for-blockcopy-bitmap-handling-test.patch Patch389: libvirt-qemublocktest-Add-empty-case-for-checkpoint-bitmap-handling.patch Patch390: libvirt-qemublocktest-Disable-testcases-for-all-bitmap-handling.patch Patch391: libvirt-qemublocktest-Delete-synthetic-bitmap-test-cases.patch Patch392: libvirt-qemublocktest-Extract-printing-of-nodename-list.patch Patch393: libvirt-qemu-checkpoint-Don-t-chain-bitmaps-for-checkpoints.patch Patch394: libvirt-qemublocktest-Replace-basic-bitmap-detection-test-case-data.patch Patch395: libvirt-qemublocktest-Replace-snapshots-bitmap-detection-test-case-data.patch Patch396: libvirt-qemuBlockBitmapChainIsValid-Adjust-to-new-semantics-of-bitmaps.patch Patch397: libvirt-qemublocktest-Re-add-bitmap-validation-for-basic-and-snapshots-cases.patch Patch398: libvirt-qemublocktest-Add-new-synthetic-bitmap-detection-and-validation-test-case.patch Patch399: libvirt-qemu-checkpoint-Don-t-merge-checkpoints-during-deletion.patch Patch400: libvirt-qemublocktest-Rename-TEST_CHECKPOINT_DELETE_MERGE-to-TEST_CHECKPOINT_DELETE.patch Patch401: libvirt-qemublocktest-Re-introduce-testing-of-checkpoint-deletion.patch Patch402: libvirt-qemu-block-Add-universal-helper-for-merging-dirty-bitmaps-for-all-scenarios.patch Patch403: libvirt-qemu-backup-Rewrite-backup-bitmap-handling-to-the-new-bitmap-semantics.patch Patch404: libvirt-qemublocktest-Add-basic-tests-for-backup-bitmap-handling.patch Patch405: libvirt-qemublocktest-Add-snapshots-tests-for-backup-bitmap-handling.patch Patch406: libvirt-qemu-Rewrite-bitmap-handling-for-block-commit.patch Patch407: libvirt-qemublocktest-Add-basic-tests-for-commit-bitmap-handling.patch Patch408: libvirt-qemublocktest-Add-snapshots-tests-for-block-commit-bitmap-handling.patch Patch409: libvirt-qemu-blockjob-Remove-disabledBitmapsBase-field-from-commit-job-private-data.patch Patch410: libvirt-qemu-Rewrite-bitmap-handling-for-block-copy.patch Patch411: libvirt-qemublocktest-Add-test-cases-for-handling-bitmaps-during-block-copy.patch Patch412: libvirt-kbase-Add-document-outlining-internals-of-incremental-backup-in-qemu.patch Patch413: libvirt-qemuBackupBegin-Don-t-leak-def-on-early-failures.patch Patch414: libvirt-qemu-backup-Initialize-store-source-properly-and-just-once.patch Patch415: libvirt-qemuBackupDiskStarted-Fix-improper-dereference-of-array.patch Patch416: libvirt-qemuBackupDiskDataCleanupOne-Don-t-exit-early-when-the-job-has-started.patch Patch417: libvirt-qemuBackupDiskDataCleanupOne-Free-incrementalBitmap.patch Patch418: libvirt-util-Move-virIsDevMapperDevice-to-virdevmapper.c.patch Patch419: libvirt-virDevMapperGetTargetsImpl-Check-for-dm-major-properly.patch Patch420: libvirt-conf-Don-t-format-http-cookies-unless-VIR_DOMAIN_DEF_FORMAT_SECURE-is-used.patch Patch421: libvirt-util-Introduce-a-parser-for-kernel-cmdline-arguments.patch Patch422: libvirt-qemu-Check-if-s390-secure-guest-support-is-enabled.patch Patch423: libvirt-qemu-Check-if-AMD-secure-guest-support-is-enabled.patch Patch424: libvirt-tools-Secure-guest-check-on-s390-in-virt-host-validate.patch Patch425: libvirt-tools-Secure-guest-check-for-AMD-in-virt-host-validate.patch Patch426: libvirt-docs-Update-AMD-launch-secure-description.patch Patch427: libvirt-docs-Describe-protected-virtualization-guest-setup.patch Patch428: libvirt-qemu-blockjob-Don-t-base-bitmap-handling-of-active-layer-block-commit-on-QEMU_CAPS_BLOCKDEV_REOPEN.patch Patch429: libvirt-qemu-blockjob-Actually-delete-temporary-bitmap-on-failed-active-commit.patch Patch430: libvirt-qemu-block-Remove-active-write-bitmap-even-if-there-are-no-bitmaps-to-merge.patch Patch431: libvirt-qemuDomainBlockPivot-Rename-actions-to-bitmapactions.patch Patch432: libvirt-qemuDomainBlockPivot-Ignore-failures-of-creating-active-layer-bitmap.patch Patch433: libvirt-src-assume-sys-sysmacros.h-always-exists-on-Linux.patch Patch434: libvirt-virdevmapper.c-Join-two-WITH_DEVMAPPER-sections-together.patch Patch435: libvirt-virDevMapperGetTargetsImpl-Use-VIR_AUTOSTRINGLIST.patch Patch436: libvirt-virdevmapper-Don-t-use-libdevmapper-to-obtain-dependencies.patch Patch437: libvirt-virDevMapperGetTargets-Don-t-ignore-EBADF.patch Patch438: libvirt-virdevmapper-Don-t-cache-device-mapper-major.patch Patch439: libvirt-virdevmapper-Handle-kernel-without-device-mapper-support.patch Patch440: libvirt-virdevmapper-Ignore-all-errors-when-opening-dev-mapper-control.patch Patch441: libvirt-qemu-substitute-missing-model-name-for-host-passthrough.patch Patch442: libvirt-rpc-gendispatch-handle-empty-flags.patch Patch443: libvirt-rpc-add-support-for-filtering-acls-by-uint-params.patch Patch444: libvirt-rpc-require-write-acl-for-guest-agent-in-virDomainInterfaceAddresses.patch Patch445: libvirt-qemu-agent-set-ifname-to-NULL-after-freeing.patch Patch446: libvirt-qemu-Fix-domfsinfo-for-non-PCI-device-information-from-guest-agent.patch Patch447: libvirt-virDomainNetFindIdx-add-support-for-CCW-addresses.patch Patch448: libvirt-check-for-NULL-before-calling-g_regex_unref.patch Patch449: libvirt-virhostcpu.c-fix-die_id-parsing-for-Power-hosts.patch Patch450: libvirt-qemuFirmwareFillDomain-Fill-NVRAM-template-on-migration-too.patch Patch451: libvirt-node_device-refactor-udevProcessCCW.patch Patch452: libvirt-node_device-detect-CSS-devices.patch Patch453: libvirt-virsh-nodedev-ability-to-filter-CSS-capabilities.patch Patch454: libvirt-node_device-detect-DASD-devices.patch Patch455: libvirt-udevProcessCSS-Check-if-def-driver-is-non-NULL.patch Patch456: libvirt-cpu_map-Add-missing-x86-features-in-0x7-CPUID-leaf.patch Patch457: libvirt-cpu_map-Add-missing-x86-features-in-0x80000008-CPUID-leaf.patch Patch458: libvirt-cpu_map-Add-missing-AMD-SVM-features.patch Patch459: libvirt-Add-testdata-for-AMD-EPYC-7502.patch Patch460: libvirt-cpu_map-Defined-and-enable-EPYC-Rome-model.patch Patch461: libvirt-cpu_map-Remove-monitor-feature-from-EPYC-Rome.patch Patch462: libvirt-tests-qemuxml2argv-Use-existing-machine-type-for-numatune-distances-case.patch Patch463: libvirt-qemuxml2xmltest-Add-numatune-distance-test-case.patch Patch464: libvirt-conf-Move-and-rename-virDomainParseScaledValue.patch Patch465: libvirt-numa_conf-Drop-CPU-from-name-of-two-functions.patch Patch466: libvirt-qemu_command-Rename-qemuBuildNumaArgStr.patch Patch467: libvirt-qemuBuildMachineCommandLine-Drop-needless-check.patch Patch468: libvirt-numa_conf-Make-virDomainNumaSetNodeCpumask-return-void.patch Patch469: libvirt-Allow-NUMA-nodes-without-vCPUs.patch Patch470: libvirt-conf-Parse-and-format-HMAT.patch Patch471: libvirt-conf-Validate-NUMA-HMAT-configuration.patch Patch472: libvirt-numa-expose-HMAT-APIs.patch Patch473: libvirt-qemu-Introduce-QEMU_CAPS_NUMA_HMAT-capability.patch Patch474: libvirt-qemu-Build-HMAT-command-line.patch Patch475: libvirt-qemuBuildNumaCommandLine-Fix-masterInitiator-check.patch Patch476: libvirt-numa_conf-Properly-check-for-caches-in-virDomainNumaDefValidate.patch Patch477: libvirt-RNG-Allow-interleaving-of-domain-cpu-numa-cell-children.patch Patch478: libvirt-conf-properly-clear-out-autogenerated-macvtap-names-when-formatting-parsing.patch Patch479: libvirt-qemu-format-ramfb-attribute-for-mediated-devices.patch Patch480: libvirt-util-replace-macvtap-name-reservation-bitmap-with-a-simple-counter.patch Patch481: libvirt-util-assign-tap-device-names-using-a-monotonically-increasing-integer.patch Patch482: libvirt-util-virNetDevTapCreate-initialize-fd-to-1.patch Patch483: libvirt-cpu_map-Fix-Icelake-Server-model-number.patch Patch484: libvirt-cputestdata-Add-test-data-for-Snowridge.patch Patch485: libvirt-cpu_map-Add-support-for-fsrm-CPU-feature.patch Patch486: libvirt-cpu_map-Add-support-for-core-capability-CPU-feature.patch Patch487: libvirt-cpu_map-Add-support-for-split-lock-detect-CPU-feature.patch Patch488: libvirt-cpu_map-Define-and-enable-Snowridge-model.patch Patch489: libvirt-util-fix-typo-in-VIR_MOCK_WRAP_RET_ARGS.patch Patch490: libvirt-util-tests-enable-locking-on-iptables-ebtables-commandlines-in-unit-tests.patch Patch491: libvirt-util-tests-enable-locking-on-iptables-ebtables-commandlines-by-default.patch Patch492: libvirt-tests-fix-iptables-test-case-commandline-options-in-virfirewalltest.c.patch Patch493: libvirt-network-be-more-verbose-about-the-reason-for-a-firewall-reload.patch Patch494: libvirt-util-always-check-for-ebtables-iptables-binaries-even-when-using-firewalld.patch Patch495: libvirt-util-synchronize-with-firewalld-before-we-start-calling-iptables-directly.patch Patch496: libvirt-util-call-iptables-directly-rather-than-via-firewalld.patch Patch497: libvirt-util-virhostcpu-Fail-when-fetching-CPU-Stats-for-invalid-cpu.patch Patch498: libvirt-qemu-move-cgroup-cpu-period-and-quota-defines-to-vircgroup.h.patch Patch499: libvirt-vircgroupv1-use-defines-for-cpu-period-and-quota-limits.patch Patch500: libvirt-vircgroupv2-use-defines-for-cpu-period-and-quota-limits.patch Patch501: libvirt-vircgroup-fix-cpu-quota-maximum-limit.patch Patch502: libvirt-util-add-virNetDevGetPhysPortName.patch Patch503: libvirt-util-avoid-manual-VIR_FREE-of-a-g_autofree-pointer-in-virPCIGetName.patch Patch504: libvirt-util-Add-phys_port_name-support-on-virPCIGetNetName.patch Patch505: libvirt-vircgroupv2-properly-detect-placement-of-running-VM.patch Patch506: libvirt-virsystemd-export-virSystemdHasMachined.patch Patch507: libvirt-virsystemd-introduce-virSystemdGetMachineByPID.patch Patch508: libvirt-virsystemd-introduce-virSystemdGetMachineUnitByPID.patch Patch509: libvirt-vircgroup-use-DBus-call-to-systemd-for-some-APIs.patch Patch510: libvirt-vircgroupv1-refactor-virCgroupV1DetectPlacement.patch Patch511: libvirt-vircgroupv2-move-task-into-cgroup-before-enabling-controllers.patch Patch512: libvirt-vircgroup-introduce-virCgroupV1Exists-and-virCgroupV2Exists.patch Patch513: libvirt-vircgroup-introduce-nested-cgroup-to-properly-work-with-systemd.patch Patch514: libvirt-tests-add-cgroup-nested-tests.patch Patch515: libvirt-vircgroup-correctly-free-nested-virCgroupPtr.patch Patch516: libvirt-qemu-Add-virtio-related-options-to-vsock.patch Patch517: libvirt-domain_validate-use-defines-for-cpu-period-and-quota-limits.patch Patch518: libvirt-docs-use-proper-cpu-quota-value-in-our-documentation.patch Patch519: libvirt-vircgroup-enforce-range-limit-for-cpu.shares.patch Patch520: libvirt-cgroup-use-virCgroupSetCpuShares-instead-of-virCgroupSetupCpuShares.patch Patch521: libvirt-cpumap-Add-support-for-ibrs-CPU-feature.patch Patch522: libvirt-cpumap-Add-support-for-svme-addr-check-CPU-feature.patch Patch523: libvirt-cpu_map-Add-EPYC-Milan-x86-CPU-model.patch Patch524: libvirt-cpu_map-Install-x86_EPYC-Milan.xml.patch Patch525: libvirt-cpu_map-Fix-spelling-of-svme-addr-chk-feature.patch Requires: libvirt-daemon = %{version}-%{release} Requires: libvirt-daemon-config-network = %{version}-%{release} Requires: libvirt-daemon-config-nwfilter = %{version}-%{release} %if %{with_libxl} Requires: libvirt-daemon-driver-libxl = %{version}-%{release} %endif %if %{with_lxc} Requires: libvirt-daemon-driver-lxc = %{version}-%{release} %endif %if %{with_qemu} Requires: libvirt-daemon-driver-qemu = %{version}-%{release} %endif # We had UML driver, but we've removed it. Obsoletes: libvirt-daemon-driver-uml <= 5.0.0 Obsoletes: libvirt-daemon-uml <= 5.0.0 %if %{with_vbox} Requires: libvirt-daemon-driver-vbox = %{version}-%{release} %endif Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release} Requires: libvirt-daemon-driver-interface = %{version}-%{release} Requires: libvirt-daemon-driver-secret = %{version}-%{release} Requires: libvirt-daemon-driver-storage = %{version}-%{release} Requires: libvirt-daemon-driver-network = %{version}-%{release} Requires: libvirt-daemon-driver-nodedev = %{version}-%{release} Requires: libvirt-client = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} # All build-time requirements. Run-time requirements are # listed against each sub-RPM %if 0%{?enable_autotools} BuildRequires: autoconf BuildRequires: automake BuildRequires: gettext-devel BuildRequires: libtool %endif %if 0%{?rhel} == 7 BuildRequires: python36-docutils %else BuildRequires: python3-docutils %endif BuildRequires: gcc BuildRequires: git %if 0%{?fedora} || 0%{?rhel} > 7 BuildRequires: perl-interpreter %else BuildRequires: perl %endif %if 0%{?rhel} > 7 BuildRequires: python3-devel %else BuildRequires: python3 %endif BuildRequires: systemd-units %if %{with_libxl} BuildRequires: xen-devel %endif BuildRequires: glib2-devel >= 2.48 BuildRequires: libxml2-devel BuildRequires: libxslt BuildRequires: readline-devel %if %{with_bash_completion} BuildRequires: bash-completion >= 2.0 %endif BuildRequires: ncurses-devel BuildRequires: gettext BuildRequires: libtasn1-devel BuildRequires: gnutls-devel BuildRequires: libattr-devel # For pool-build probing for existing pools BuildRequires: libblkid-devel >= 2.17 # for augparse, optionally used in testing BuildRequires: augeas BuildRequires: systemd-devel >= 185 BuildRequires: libpciaccess-devel >= 0.10.9 BuildRequires: yajl-devel %if %{with_sanlock} BuildRequires: sanlock-devel >= 2.4 %endif BuildRequires: libpcap-devel BuildRequires: libnl3-devel BuildRequires: libselinux-devel BuildRequires: dnsmasq >= 2.41 BuildRequires: iptables BuildRequires: radvd BuildRequires: ebtables BuildRequires: module-init-tools BuildRequires: cyrus-sasl-devel BuildRequires: polkit >= 0.112 # For mount/umount in FS driver BuildRequires: util-linux %if %{with_qemu} # For managing ACLs BuildRequires: libacl-devel # From QEMU RPMs BuildRequires: /usr/bin/qemu-img %endif # For LVM drivers BuildRequires: lvm2 # For pool type=iscsi BuildRequires: iscsi-initiator-utils %if %{with_storage_iscsi_direct} # For pool type=iscsi-direct BuildRequires: libiscsi-devel %endif # For disk driver BuildRequires: parted-devel # For Multipath support BuildRequires: device-mapper-devel # For XFS reflink clone support BuildRequires: xfsprogs-devel %if %{with_storage_rbd} %if 0%{?fedora} || 0%{?rhel} > 7 BuildRequires: librados-devel BuildRequires: librbd-devel %else BuildRequires: librados2-devel BuildRequires: librbd1-devel %endif %endif %if %{with_storage_gluster} BuildRequires: glusterfs-api-devel >= 3.4.1 BuildRequires: glusterfs-devel >= 3.4.1 %endif %if %{with_storage_sheepdog} BuildRequires: sheepdog %endif %if %{with_storage_zfs} # Support any conforming implementation of zfs. On stock Fedora # this is zfs-fuse, but could be zfsonlinux upstream RPMs BuildRequires: /sbin/zfs BuildRequires: /sbin/zpool %endif %if %{with_numactl} # For QEMU/LXC numa info BuildRequires: numactl-devel %endif BuildRequires: libcap-ng-devel >= 0.5.0 %if %{with_fuse} BuildRequires: fuse-devel >= 2.8.6 %endif %if %{with_libssh2} BuildRequires: libssh2-devel >= 1.3.0 %endif BuildRequires: netcf-devel >= 0.2.2 %if %{with_esx} BuildRequires: libcurl-devel %endif %if %{with_hyperv} BuildRequires: libwsman-devel >= 2.2.3 %endif BuildRequires: audit-libs-devel # we need /usr/sbin/dtrace BuildRequires: systemtap-sdt-devel # For mount/umount in FS driver BuildRequires: util-linux # For showmount in FS driver (netfs discovery) BuildRequires: nfs-utils # Communication with the firewall and polkit daemons use DBus BuildRequires: dbus-devel # Fedora build root suckage BuildRequires: gawk # For storage wiping with different algorithms BuildRequires: scrub %if %{with_numad} BuildRequires: numad %endif %if %{with_wireshark} BuildRequires: wireshark-devel >= 2.4.0 %endif %if %{with_libssh} BuildRequires: libssh-devel >= 0.7.0 %endif %if 0%{?fedora} || 0%{?rhel} > 7 BuildRequires: rpcgen BuildRequires: libtirpc-devel %endif %if %{with_firewalld_zone} BuildRequires: firewalld-filesystem %endif Provides: bundled(gnulib) %description Libvirt is a C toolkit to interact with the virtualization capabilities of recent versions of Linux (and other OSes). The main package includes the libvirtd server exporting the virtualization support. %package docs Summary: API reference and website documentation %description docs Includes the API reference for the libvirt C library, and a complete copy of the libvirt.org website documentation. %package daemon Summary: Server side daemon and supporting files for libvirt library # All runtime requirements for the libvirt package (runtime requrements # for subpackages are listed later in those subpackages) # The client side, i.e. shared libs are in a subpackage Requires: %{name}-libs = %{version}-%{release} # (client invokes 'nc' against the UNIX socket on the server) Requires: /usr/bin/nc # for modprobe of pci devices Requires: module-init-tools # for /sbin/ip & /sbin/tc Requires: iproute # tc is provided by iproute-tc since at least Fedora 26 %if 0%{?fedora} || 0%{?rhel} > 7 Requires: iproute-tc %endif Requires: polkit >= 0.112 %ifarch %{ix86} x86_64 ia64 # For virConnectGetSysinfo Requires: dmidecode %endif # For service management Requires(post): systemd-units Requires(post): systemd-sysv Requires(preun): systemd-units Requires(postun): systemd-units %if %{with_numad} Requires: numad %endif # libvirtd depends on 'messagebus' service Requires: dbus # For uid creation during pre Requires(pre): shadow-utils %description daemon Server side daemon required to manage the virtualization capabilities of recent versions of Linux. Requires a hypervisor specific sub-RPM for specific drivers. %package daemon-config-network Summary: Default configuration files for the libvirtd daemon Requires: libvirt-daemon = %{version}-%{release} Requires: libvirt-daemon-driver-network = %{version}-%{release} %description daemon-config-network Default configuration files for setting up NAT based networking %package daemon-config-nwfilter Summary: Network filter configuration files for the libvirtd daemon Requires: libvirt-daemon = %{version}-%{release} Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release} %description daemon-config-nwfilter Network filter configuration files for cleaning guest traffic %package daemon-driver-network Summary: Network driver plugin for the libvirtd daemon Requires: libvirt-daemon = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} Requires: dnsmasq >= 2.41 Requires: radvd Requires: iptables %description daemon-driver-network The network driver plugin for the libvirtd daemon, providing an implementation of the virtual network APIs using the Linux bridge capabilities. %package daemon-driver-nwfilter Summary: Nwfilter driver plugin for the libvirtd daemon Requires: libvirt-daemon = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} Requires: iptables Requires: ebtables %description daemon-driver-nwfilter The nwfilter driver plugin for the libvirtd daemon, providing an implementation of the firewall APIs using the ebtables, iptables and ip6tables capabilities %package daemon-driver-nodedev Summary: Nodedev driver plugin for the libvirtd daemon Requires: libvirt-daemon = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} # needed for device enumeration Requires: systemd >= 185 %description daemon-driver-nodedev The nodedev driver plugin for the libvirtd daemon, providing an implementation of the node device APIs using the udev capabilities. %package daemon-driver-interface Summary: Interface driver plugin for the libvirtd daemon Requires: libvirt-daemon = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} Requires: netcf-libs >= 0.2.2 %description daemon-driver-interface The interface driver plugin for the libvirtd daemon, providing an implementation of the network interface APIs using the netcf library %package daemon-driver-secret Summary: Secret driver plugin for the libvirtd daemon Requires: libvirt-daemon = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} %description daemon-driver-secret The secret driver plugin for the libvirtd daemon, providing an implementation of the secret key APIs. %package daemon-driver-storage-core Summary: Storage driver plugin including base backends for the libvirtd daemon Requires: libvirt-daemon = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} Requires: nfs-utils # For mkfs Requires: util-linux %if %{with_qemu} # From QEMU RPMs Requires: /usr/bin/qemu-img %endif %if !%{with_storage_rbd} Obsoletes: libvirt-daemon-driver-storage-rbd < %{version}-%{release} %endif %description daemon-driver-storage-core The storage driver plugin for the libvirtd daemon, providing an implementation of the storage APIs using files, local disks, LVM, SCSI, iSCSI, and multipath storage. %package daemon-driver-storage-logical Summary: Storage driver plugin for lvm volumes Requires: libvirt-daemon-driver-storage-core = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} Requires: lvm2 %description daemon-driver-storage-logical The storage driver backend adding implementation of the storage APIs for block volumes using lvm. %package daemon-driver-storage-disk Summary: Storage driver plugin for disk Requires: libvirt-daemon-driver-storage-core = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} Requires: parted Requires: device-mapper %description daemon-driver-storage-disk The storage driver backend adding implementation of the storage APIs for block volumes using the host disks. %package daemon-driver-storage-scsi Summary: Storage driver plugin for local scsi devices Requires: libvirt-daemon-driver-storage-core = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} %description daemon-driver-storage-scsi The storage driver backend adding implementation of the storage APIs for scsi host devices. %package daemon-driver-storage-iscsi Summary: Storage driver plugin for iscsi Requires: libvirt-daemon-driver-storage-core = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} Requires: iscsi-initiator-utils %description daemon-driver-storage-iscsi The storage driver backend adding implementation of the storage APIs for iscsi volumes using the host iscsi stack. %if %{with_storage_iscsi_direct} %package daemon-driver-storage-iscsi-direct Summary: Storage driver plugin for iscsi-direct Requires: libvirt-daemon-driver-storage-core = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} Requires: libiscsi %description daemon-driver-storage-iscsi-direct The storage driver backend adding implementation of the storage APIs for iscsi volumes using libiscsi direct connection. %endif %package daemon-driver-storage-mpath Summary: Storage driver plugin for multipath volumes Requires: libvirt-daemon-driver-storage-core = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} Requires: device-mapper %description daemon-driver-storage-mpath The storage driver backend adding implementation of the storage APIs for multipath storage using device mapper. %if %{with_storage_gluster} %package daemon-driver-storage-gluster Summary: Storage driver plugin for gluster Requires: libvirt-daemon-driver-storage-core = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} %if 0%{?fedora} Requires: glusterfs-client >= 2.0.1 %endif %if (0%{?fedora} || 0%{?with_storage_gluster}) Requires: /usr/sbin/gluster %endif %description daemon-driver-storage-gluster The storage driver backend adding implementation of the storage APIs for gluster volumes using libgfapi. %endif %if %{with_storage_rbd} %package daemon-driver-storage-rbd Summary: Storage driver plugin for rbd Requires: libvirt-daemon-driver-storage-core = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} %description daemon-driver-storage-rbd The storage driver backend adding implementation of the storage APIs for rbd volumes using the ceph protocol. %endif %if %{with_storage_sheepdog} %package daemon-driver-storage-sheepdog Summary: Storage driver plugin for sheepdog Requires: libvirt-daemon-driver-storage-core = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} Requires: sheepdog %description daemon-driver-storage-sheepdog The storage driver backend adding implementation of the storage APIs for sheepdog volumes using. %endif %if %{with_storage_zfs} %package daemon-driver-storage-zfs Summary: Storage driver plugin for ZFS Requires: libvirt-daemon-driver-storage-core = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} # Support any conforming implementation of zfs Requires: /sbin/zfs Requires: /sbin/zpool %description daemon-driver-storage-zfs The storage driver backend adding implementation of the storage APIs for ZFS volumes. %endif %package daemon-driver-storage Summary: Storage driver plugin including all backends for the libvirtd daemon Requires: libvirt-daemon-driver-storage-core = %{version}-%{release} Requires: libvirt-daemon-driver-storage-disk = %{version}-%{release} Requires: libvirt-daemon-driver-storage-logical = %{version}-%{release} Requires: libvirt-daemon-driver-storage-scsi = %{version}-%{release} Requires: libvirt-daemon-driver-storage-iscsi = %{version}-%{release} Requires: libvirt-daemon-driver-storage-mpath = %{version}-%{release} %if %{with_storage_iscsi_direct} Requires: libvirt-daemon-driver-storage-iscsi-direct = %{version}-%{release} %endif %if %{with_storage_gluster} Requires: libvirt-daemon-driver-storage-gluster = %{version}-%{release} %endif %if %{with_storage_rbd} Requires: libvirt-daemon-driver-storage-rbd = %{version}-%{release} %endif %if %{with_storage_sheepdog} Requires: libvirt-daemon-driver-storage-sheepdog = %{version}-%{release} %endif %if %{with_storage_zfs} Requires: libvirt-daemon-driver-storage-zfs = %{version}-%{release} %endif %description daemon-driver-storage The storage driver plugin for the libvirtd daemon, providing an implementation of the storage APIs using LVM, iSCSI, parted and more. %if %{with_qemu} %package daemon-driver-qemu Summary: QEMU driver plugin for the libvirtd daemon Requires: libvirt-daemon = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} Requires: /usr/bin/qemu-img # For image compression Requires: gzip Requires: bzip2 Requires: lzop Requires: xz %if 0%{?fedora} || 0%{?rhel} > 7 Requires: systemd-container %endif %description daemon-driver-qemu The qemu driver plugin for the libvirtd daemon, providing an implementation of the hypervisor driver APIs using QEMU %endif %if %{with_lxc} %package daemon-driver-lxc Summary: LXC driver plugin for the libvirtd daemon Requires: libvirt-daemon = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} # There really is a hard cross-driver dependency here Requires: libvirt-daemon-driver-network = %{version}-%{release} %if 0%{?fedora} || 0%{?rhel} > 7 Requires: systemd-container %endif %description daemon-driver-lxc The LXC driver plugin for the libvirtd daemon, providing an implementation of the hypervisor driver APIs using the Linux kernel %endif %if %{with_vbox} %package daemon-driver-vbox Summary: VirtualBox driver plugin for the libvirtd daemon Requires: libvirt-daemon = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} %description daemon-driver-vbox The vbox driver plugin for the libvirtd daemon, providing an implementation of the hypervisor driver APIs using VirtualBox %endif %if %{with_libxl} %package daemon-driver-libxl Summary: Libxl driver plugin for the libvirtd daemon Requires: libvirt-daemon = %{version}-%{release} Requires: libvirt-libs = %{version}-%{release} Obsoletes: libvirt-daemon-driver-xen < 4.3.0 %description daemon-driver-libxl The Libxl driver plugin for the libvirtd daemon, providing an implementation of the hypervisor driver APIs using Libxl %endif %if %{with_qemu_tcg} %package daemon-qemu Summary: Server side daemon & driver required to run QEMU guests Requires: libvirt-daemon = %{version}-%{release} Requires: libvirt-daemon-driver-qemu = %{version}-%{release} Requires: libvirt-daemon-driver-interface = %{version}-%{release} Requires: libvirt-daemon-driver-network = %{version}-%{release} Requires: libvirt-daemon-driver-nodedev = %{version}-%{release} Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release} Requires: libvirt-daemon-driver-secret = %{version}-%{release} Requires: libvirt-daemon-driver-storage = %{version}-%{release} Requires: qemu %description daemon-qemu Server side daemon and driver required to manage the virtualization capabilities of the QEMU TCG emulators %endif %if %{with_qemu_kvm} %package daemon-kvm Summary: Server side daemon & driver required to run KVM guests Requires: libvirt-daemon = %{version}-%{release} Requires: libvirt-daemon-driver-qemu = %{version}-%{release} Requires: libvirt-daemon-driver-interface = %{version}-%{release} Requires: libvirt-daemon-driver-network = %{version}-%{release} Requires: libvirt-daemon-driver-nodedev = %{version}-%{release} Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release} Requires: libvirt-daemon-driver-secret = %{version}-%{release} Requires: libvirt-daemon-driver-storage = %{version}-%{release} Requires: qemu-kvm %description daemon-kvm Server side daemon and driver required to manage the virtualization capabilities of the KVM hypervisor %endif %if %{with_lxc} %package daemon-lxc Summary: Server side daemon & driver required to run LXC guests Requires: libvirt-daemon = %{version}-%{release} Requires: libvirt-daemon-driver-lxc = %{version}-%{release} Requires: libvirt-daemon-driver-interface = %{version}-%{release} Requires: libvirt-daemon-driver-network = %{version}-%{release} Requires: libvirt-daemon-driver-nodedev = %{version}-%{release} Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release} Requires: libvirt-daemon-driver-secret = %{version}-%{release} Requires: libvirt-daemon-driver-storage = %{version}-%{release} %description daemon-lxc Server side daemon and driver required to manage the virtualization capabilities of LXC %endif %if %{with_libxl} %package daemon-xen Summary: Server side daemon & driver required to run XEN guests Requires: libvirt-daemon = %{version}-%{release} %if %{with_libxl} Requires: libvirt-daemon-driver-libxl = %{version}-%{release} %endif Requires: libvirt-daemon-driver-interface = %{version}-%{release} Requires: libvirt-daemon-driver-network = %{version}-%{release} Requires: libvirt-daemon-driver-nodedev = %{version}-%{release} Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release} Requires: libvirt-daemon-driver-secret = %{version}-%{release} Requires: libvirt-daemon-driver-storage = %{version}-%{release} Requires: xen %description daemon-xen Server side daemon and driver required to manage the virtualization capabilities of XEN %endif %if %{with_vbox} %package daemon-vbox Summary: Server side daemon & driver required to run VirtualBox guests Requires: libvirt-daemon = %{version}-%{release} Requires: libvirt-daemon-driver-vbox = %{version}-%{release} Requires: libvirt-daemon-driver-interface = %{version}-%{release} Requires: libvirt-daemon-driver-network = %{version}-%{release} Requires: libvirt-daemon-driver-nodedev = %{version}-%{release} Requires: libvirt-daemon-driver-nwfilter = %{version}-%{release} Requires: libvirt-daemon-driver-secret = %{version}-%{release} Requires: libvirt-daemon-driver-storage = %{version}-%{release} %description daemon-vbox Server side daemon and driver required to manage the virtualization capabilities of VirtualBox %endif %package client Summary: Client side utilities of the libvirt library Requires: %{name}-libs = %{version}-%{release} Requires: readline Requires: ncurses # Needed by /usr/libexec/libvirt-guests.sh script. Requires: gettext # Needed by virt-pki-validate script. Requires: gnutls-utils %if %{with_bash_completion} Requires: %{name}-bash-completion = %{version}-%{release} %endif %description client The client binaries needed to access the virtualization capabilities of recent versions of Linux (and other OSes). %package libs Summary: Client side libraries # So remote clients can access libvirt over SSH tunnel Requires: cyrus-sasl # Needed by default sasl.conf - no onerous extra deps, since # 100's of other things on a system already pull in krb5-libs Requires: cyrus-sasl-gssapi %description libs Shared libraries for accessing the libvirt daemon. %package admin Summary: Set of tools to control libvirt daemon Requires: %{name}-libs = %{version}-%{release} Requires: readline %if %{with_bash_completion} Requires: %{name}-bash-completion = %{version}-%{release} %endif %description admin The client side utilities to control the libvirt daemon. %if %{with_bash_completion} %package bash-completion Summary: Bash completion script %description bash-completion Bash completion script stub. %endif %if %{with_wireshark} %package wireshark Summary: Wireshark dissector plugin for libvirt RPC transactions Requires: wireshark >= 2.4.0 Requires: %{name}-libs = %{version}-%{release} %description wireshark Wireshark dissector plugin for better analysis of libvirt RPC traffic. %endif %if %{with_lxc} %package login-shell Summary: Login shell for connecting users to an LXC container Requires: %{name}-libs = %{version}-%{release} %description login-shell Provides the set-uid virt-login-shell binary that is used to connect a user to an LXC container when they login, by switching namespaces. %endif %package devel Summary: Libraries, includes, etc. to compile with the libvirt library Requires: %{name}-libs = %{version}-%{release} Requires: pkgconfig %description devel Include header files & development libraries for the libvirt C library. %if %{with_sanlock} %package lock-sanlock Summary: Sanlock lock manager plugin for QEMU driver Requires: sanlock >= 2.4 #for virt-sanlock-cleanup require augeas Requires: augeas Requires: %{name}-daemon = %{version}-%{release} Requires: %{name}-libs = %{version}-%{release} %description lock-sanlock Includes the Sanlock lock manager plugin for the QEMU driver %endif %package nss Summary: Libvirt plugin for Name Service Switch Requires: libvirt-daemon-driver-network = %{version}-%{release} %description nss Libvirt plugin for NSS for translating domain names into IP addresses. %prep %autosetup -S git_am -N # "make dist" replaces all symlinks with a copy of the linked files; # we need to replace all of them with the original symlinks echo "Restoring symlinks" while read lnk target; do if [ -e $lnk ]; then rm -rf $lnk ln -s $target $lnk fi done <%{_sourcedir}/symlinks || exit 1 git add . git commit -q -a --author 'rpm-build ' -m symlinks git config gc.auto 0 %autopatch %build %if ! %{supported_platform} echo "This RPM requires either Fedora >= %{min_fedora} or RHEL >= %{min_rhel}" exit 1 %endif %if %{with_qemu} %define arg_qemu --with-qemu %else %define arg_qemu --without-qemu %endif %if %{with_openvz} %define arg_openvz --with-openvz %else %define arg_openvz --without-openvz %endif %if %{with_lxc} %define arg_lxc --with-lxc %define arg_login_shell --with-login-shell %else %define arg_lxc --without-lxc %define arg_login_shell --without-login-shell %endif %if %{with_vbox} %define arg_vbox --with-vbox %else %define arg_vbox --without-vbox %endif %if %{with_libxl} %define arg_libxl --with-libxl %else %define arg_libxl --without-libxl %endif %if %{with_esx} %define arg_esx --with-esx %else %define arg_esx --without-esx %endif %if %{with_hyperv} %define arg_hyperv --with-hyperv %else %define arg_hyperv --without-hyperv %endif %if %{with_vmware} %define arg_vmware --with-vmware %else %define arg_vmware --without-vmware %endif %if %{with_storage_rbd} %define arg_storage_rbd --with-storage-rbd %else %define arg_storage_rbd --without-storage-rbd %endif %if %{with_storage_sheepdog} %define arg_storage_sheepdog --with-storage-sheepdog %else %define arg_storage_sheepdog --without-storage-sheepdog %endif %if %{with_storage_gluster} %define arg_storage_gluster --with-storage-gluster %else %define arg_storage_gluster --without-storage-gluster %endif %if %{with_storage_zfs} %define arg_storage_zfs --with-storage-zfs %else %define arg_storage_zfs --without-storage-zfs %endif %if %{with_numactl} %define arg_numactl --with-numactl %else %define arg_numactl --without-numactl %endif %if %{with_numad} %define arg_numad --with-numad %else %define arg_numad --without-numad %endif %if %{with_fuse} %define arg_fuse --with-fuse %else %define arg_fuse --without-fuse %endif %if %{with_sanlock} %define arg_sanlock --with-sanlock %else %define arg_sanlock --without-sanlock %endif %if %{with_firewalld} %define arg_firewalld --with-firewalld %else %define arg_firewalld --without-firewalld %endif %if %{with_firewalld_zone} %define arg_firewalld_zone --with-firewalld-zone %else %define arg_firewalld_zone --without-firewalld-zone %endif %if %{with_wireshark} %define arg_wireshark --with-wireshark-dissector %else %define arg_wireshark --without-wireshark-dissector %endif %if %{with_storage_iscsi_direct} %define arg_storage_iscsi_direct --with-storage-iscsi-direct %else %define arg_storage_iscsi_direct --without-storage-iscsi-direct %endif %define when %(date +"%%F-%%T") %define where %(hostname) %define who %{?packager}%{!?packager:Unknown} %define arg_packager --with-packager="%{who}, %{when}, %{where}" %define arg_packager_version --with-packager-version="%{release}" %define arg_selinux_mount --with-selinux-mount="/sys/fs/selinux" # place macros above and build commands below this comment export SOURCE_DATE_EPOCH=$(stat --printf='%Y' %{_specdir}/%{name}.spec) %if 0%{?enable_autotools} autoreconf -if %endif rm -f po/stamp-po %define _configure ../configure mkdir %{_vpath_builddir} cd %{_vpath_builddir} %configure --enable-dependency-tracking \ --with-runstatedir=%{_rundir} \ %{?arg_qemu} \ %{?arg_openvz} \ %{?arg_lxc} \ %{?arg_vbox} \ %{?arg_libxl} \ --with-sasl \ --with-polkit \ --with-libvirtd \ %{?arg_esx} \ %{?arg_hyperv} \ %{?arg_vmware} \ --without-vz \ --without-bhyve \ --with-remote-default-mode=legacy \ --with-interface \ --with-network \ --with-storage-fs \ --with-storage-lvm \ --with-storage-iscsi \ %{?arg_storage_iscsi_direct} \ --with-storage-scsi \ --with-storage-disk \ --with-storage-mpath \ %{?arg_storage_rbd} \ %{?arg_storage_sheepdog} \ %{?arg_storage_gluster} \ %{?arg_storage_zfs} \ --without-storage-vstorage \ %{?arg_numactl} \ %{?arg_numad} \ --with-capng \ %{?arg_fuse} \ --with-netcf \ --with-selinux \ %{?arg_selinux_mount} \ --without-apparmor \ --without-hal \ --with-udev \ --with-yajl \ %{?arg_sanlock} \ --with-libpcap \ --with-macvtap \ --with-audit \ --with-dtrace \ --with-driver-modules \ %{?arg_firewalld} \ %{?arg_firewalld_zone} \ %{?arg_wireshark} \ --without-pm-utils \ --with-nss-plugin \ %{arg_packager} \ %{arg_packager_version} \ --with-qemu-user=%{qemu_user} \ --with-qemu-group=%{qemu_group} \ --with-tls-priority=%{tls_priority} \ %{?enable_werror} \ --enable-expensive-tests \ --with-init-script=systemd \ %{?arg_login_shell} make %{?_smp_mflags} V=1 %install rm -fr %{buildroot} export SOURCE_DATE_EPOCH=$(stat --printf='%Y' %{_specdir}/%{name}.spec) cd %{_vpath_builddir} %make_install %{?_smp_mflags} SYSTEMD_UNIT_DIR=%{_unitdir} V=1 rm -f $RPM_BUILD_ROOT%{_libdir}/*.la rm -f $RPM_BUILD_ROOT%{_libdir}/*.a rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/lock-driver/*.la rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/lock-driver/*.a rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/connection-driver/*.la rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/connection-driver/*.a rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/storage-backend/*.la rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/storage-backend/*.a rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/storage-file/*.la rm -f $RPM_BUILD_ROOT%{_libdir}/libvirt/storage-file/*.a %if %{with_wireshark} rm -f $RPM_BUILD_ROOT%{wireshark_plugindir}/libvirt.la %endif install -d -m 0755 $RPM_BUILD_ROOT%{_datadir}/lib/libvirt/dnsmasq/ # We don't want to install /etc/libvirt/qemu/networks in the main %files list # because if the admin wants to delete the default network completely, we don't # want to end up re-incarnating it on every RPM upgrade. install -d -m 0755 $RPM_BUILD_ROOT%{_datadir}/libvirt/networks/ cp $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu/networks/default.xml \ $RPM_BUILD_ROOT%{_datadir}/libvirt/networks/default.xml # libvirt saves this file with mode 0600 chmod 0600 $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu/networks/default.xml # nwfilter files are installed in /usr/share/libvirt and copied to /etc in %post # to avoid verification errors on changed files in /etc install -d -m 0755 $RPM_BUILD_ROOT%{_datadir}/libvirt/nwfilter/ cp -a $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/nwfilter/*.xml \ $RPM_BUILD_ROOT%{_datadir}/libvirt/nwfilter/ # libvirt saves these files with mode 600 chmod 600 $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/nwfilter/*.xml # Strip auto-generated UUID - we need it generated per-install sed -i -e "//d" $RPM_BUILD_ROOT%{_datadir}/libvirt/networks/default.xml %if ! %{with_qemu} rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/libvirtd_qemu.aug rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/tests/test_libvirtd_qemu.aug %endif %find_lang %{name} %if ! %{with_sanlock} rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/libvirt_sanlock.aug rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/tests/test_libvirt_sanlock.aug %endif %if ! %{with_lxc} rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/libvirtd_lxc.aug rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/tests/test_libvirtd_lxc.aug %endif %if ! %{with_qemu} rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/qemu.conf rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d/libvirtd.qemu %endif %if ! %{with_lxc} rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/lxc.conf rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d/libvirtd.lxc %endif %if ! %{with_libxl} rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/libvirt/libxl.conf rm -rf $RPM_BUILD_ROOT%{_sysconfdir}/logrotate.d/libvirtd.libxl rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/libvirtd_libxl.aug rm -f $RPM_BUILD_ROOT%{_datadir}/augeas/lenses/tests/test_libvirtd_libxl.aug %endif # Copied into libvirt-docs subpackage eventually mv $RPM_BUILD_ROOT%{_datadir}/doc/libvirt libvirt-docs %ifarch %{power64} s390x x86_64 ia64 alpha sparc64 mv $RPM_BUILD_ROOT%{_datadir}/systemtap/tapset/libvirt_probes.stp \ $RPM_BUILD_ROOT%{_datadir}/systemtap/tapset/libvirt_probes-64.stp %if %{with_qemu} mv $RPM_BUILD_ROOT%{_datadir}/systemtap/tapset/libvirt_qemu_probes.stp \ $RPM_BUILD_ROOT%{_datadir}/systemtap/tapset/libvirt_qemu_probes-64.stp %endif %endif %check # The gnulib's test test-nonblocking-pipe.sh depends on timing and fails # on AArch64. Let's just disable it until we get rid of gnulib completely. for t in gnulib/tests/test-nonblocking-pipe.sh; do rm -f $t printf '#!/bin/sh\nexit 77\n' > $t chmod a+x $t done cd %{_vpath_builddir} if ! make %{?_smp_mflags} check VIR_TEST_DEBUG=1 then cat tests/test-suite.log || true exit 1 fi %post libs %if 0%{?rhel} == 7 /sbin/ldconfig %endif %postun libs %if 0%{?rhel} == 7 /sbin/ldconfig %endif %pre daemon # 'libvirt' group is just to allow password-less polkit access to # libvirtd. The uid number is irrelevant, so we use dynamic allocation # described at the above link. getent group libvirt >/dev/null || groupadd -r libvirt exit 0 %post daemon %systemd_post virtlockd.socket virtlockd-admin.socket %systemd_post virtlogd.socket virtlogd-admin.socket %systemd_post libvirtd.socket libvirtd-ro.socket libvirtd-admin.socket %systemd_post libvirtd-tcp.socket libvirtd-tls.socket %systemd_post libvirtd.service # request daemon restart in posttrans mkdir -p %{_localstatedir}/lib/rpm-state/libvirt || : touch %{_localstatedir}/lib/rpm-state/libvirt/restart || : %preun daemon %systemd_preun libvirtd.service %systemd_preun libvirtd-tcp.socket libvirtd-tls.socket %systemd_preun libvirtd.socket libvirtd-ro.socket libvirtd-admin.socket %systemd_preun virtlogd.socket virtlogd-admin.socket virtlogd.service %systemd_preun virtlockd.socket virtlockd-admin.socket virtlockd.service %postun daemon /bin/systemctl daemon-reload >/dev/null 2>&1 || : if [ $1 -ge 1 ] ; then /bin/systemctl reload-or-try-restart virtlockd.service >/dev/null 2>&1 || : /bin/systemctl reload-or-try-restart virtlogd.service >/dev/null 2>&1 || : fi # In upgrade scenario we must explicitly enable virtlockd/virtlogd # sockets, if libvirtd is already enabled and start them if # libvirtd is running, otherwise you'll get failures to start # guests %triggerpostun daemon -- libvirt-daemon < 1.3.0 if [ $1 -ge 1 ] ; then /bin/systemctl is-enabled libvirtd.service 1>/dev/null 2>&1 && /bin/systemctl enable virtlogd.socket virtlogd-admin.socket || : /bin/systemctl is-active libvirtd.service 1>/dev/null 2>&1 && /bin/systemctl start virtlogd.socket virtlogd-admin.socket || : fi %posttrans daemon if [ -f %{_localstatedir}/lib/rpm-state/libvirt/restart ]; then # See if user has previously modified their install to # tell libvirtd to use --listen grep -E '^LIBVIRTD_ARGS=.*--listen' /etc/sysconfig/libvirtd 1>/dev/null 2>&1 if test $? = 0 then # Then lets keep honouring --listen and *not* use # systemd socket activation, because switching things # might confuse mgmt tool like puppet/ansible that # expect the old style libvirtd /bin/systemctl mask libvirtd.socket >/dev/null 2>&1 || : /bin/systemctl mask libvirtd-ro.socket >/dev/null 2>&1 || : /bin/systemctl mask libvirtd-admin.socket >/dev/null 2>&1 || : /bin/systemctl mask libvirtd-tls.socket >/dev/null 2>&1 || : /bin/systemctl mask libvirtd-tcp.socket >/dev/null 2>&1 || : else # Old libvirtd owns the sockets and will delete them on # shutdown. Can't use a try-restart as libvirtd will simply # own the sockets again when it comes back up. Thus we must # do this particular ordering, so that we get libvirtd # running with socket activation in use /bin/systemctl is-active libvirtd.service 1>/dev/null 2>&1 if test $? = 0 then /bin/systemctl stop libvirtd.service >/dev/null 2>&1 || : /bin/systemctl try-restart libvirtd.socket >/dev/null 2>&1 || : /bin/systemctl try-restart libvirtd-ro.socket >/dev/null 2>&1 || : /bin/systemctl try-restart libvirtd-admin.socket >/dev/null 2>&1 || : /bin/systemctl start libvirtd.service >/dev/null 2>&1 || : fi fi fi rm -rf %{_localstatedir}/lib/rpm-state/libvirt || : %post daemon-driver-network %if %{with_firewalld_zone} %firewalld_reload %endif %postun daemon-driver-network %if %{with_firewalld_zone} %firewalld_reload %endif %post daemon-config-network if test $1 -eq 1 && test ! -f %{_sysconfdir}/libvirt/qemu/networks/default.xml ; then # see if the network used by default network creates a conflict, # and try to resolve it # NB: 192.168.122.0/24 is used in the default.xml template file; # do not modify any of those values here without also modifying # them in the template. orig_sub=122 sub=${orig_sub} nl=' ' routes="${nl}$(ip route show | cut -d' ' -f1)${nl}" case ${routes} in *"${nl}192.168.${orig_sub}.0/24${nl}"*) # there was a match, so we need to look for an unused subnet for new_sub in $(seq 124 254); do case ${routes} in *"${nl}192.168.${new_sub}.0/24${nl}"*) ;; *) sub=$new_sub break; ;; esac done ;; *) ;; esac UUID=`/usr/bin/uuidgen` sed -e "s/${orig_sub}/${sub}/g" \ -e "s,,\n $UUID," \ < %{_datadir}/libvirt/networks/default.xml \ > %{_sysconfdir}/libvirt/qemu/networks/default.xml ln -s ../default.xml %{_sysconfdir}/libvirt/qemu/networks/autostart/default.xml # libvirt saves this file with mode 0600 chmod 0600 %{_sysconfdir}/libvirt/qemu/networks/default.xml # Make sure libvirt picks up the new network defininiton mkdir -p %{_localstatedir}/lib/rpm-state/libvirt || : touch %{_localstatedir}/lib/rpm-state/libvirt/restart || : fi %posttrans daemon-config-network if [ -f %{_localstatedir}/lib/rpm-state/libvirt/restart ]; then /bin/systemctl try-restart libvirtd.service >/dev/null 2>&1 || : fi rm -rf %{_localstatedir}/lib/rpm-state/libvirt || : %post daemon-config-nwfilter cp %{_datadir}/libvirt/nwfilter/*.xml %{_sysconfdir}/libvirt/nwfilter/ # libvirt saves these files with mode 600 chmod 600 %{_sysconfdir}/libvirt/nwfilter/*.xml # Make sure libvirt picks up the new nwfilter defininitons mkdir -p %{_localstatedir}/lib/rpm-state/libvirt || : touch %{_localstatedir}/lib/rpm-state/libvirt/restart || : %posttrans daemon-config-nwfilter if [ -f %{_localstatedir}/lib/rpm-state/libvirt/restart ]; then /bin/systemctl try-restart libvirtd.service >/dev/null 2>&1 || : fi rm -rf %{_localstatedir}/lib/rpm-state/libvirt || : %if %{with_qemu} %pre daemon-driver-qemu # We want soft static allocation of well-known ids, as disk images # are commonly shared across NFS mounts by id rather than name; see # https://fedoraproject.org/wiki/Packaging:UsersAndGroups getent group kvm >/dev/null || groupadd -f -g 36 -r kvm getent group qemu >/dev/null || groupadd -f -g 107 -r qemu if ! getent passwd qemu >/dev/null; then if ! getent passwd 107 >/dev/null; then useradd -r -u 107 -g qemu -G kvm -d / -s /sbin/nologin -c "qemu user" qemu else useradd -r -g qemu -G kvm -d / -s /sbin/nologin -c "qemu user" qemu fi fi exit 0 %endif %preun client %systemd_preun libvirt-guests.service %post client %systemd_post libvirt-guests.service %postun client %systemd_postun libvirt-guests.service %if %{with_lxc} %pre login-shell getent group virtlogin >/dev/null || groupadd -r virtlogin exit 0 %endif %files %files docs %doc AUTHORS ChangeLog NEWS README README.md %doc %{_vpath_builddir}/libvirt-docs/* %files daemon %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/ %{_unitdir}/libvirtd.service %{_unitdir}/libvirtd.socket %{_unitdir}/libvirtd-ro.socket %{_unitdir}/libvirtd-admin.socket %{_unitdir}/libvirtd-tcp.socket %{_unitdir}/libvirtd-tls.socket %{_unitdir}/virtproxyd.service %{_unitdir}/virtproxyd.socket %{_unitdir}/virtproxyd-ro.socket %{_unitdir}/virtproxyd-admin.socket %{_unitdir}/virtproxyd-tcp.socket %{_unitdir}/virtproxyd-tls.socket %{_unitdir}/virt-guest-shutdown.target %{_unitdir}/virtlogd.service %{_unitdir}/virtlogd.socket %{_unitdir}/virtlogd-admin.socket %{_unitdir}/virtlockd.service %{_unitdir}/virtlockd.socket %{_unitdir}/virtlockd-admin.socket %config(noreplace) %{_sysconfdir}/sysconfig/libvirtd %config(noreplace) %{_sysconfdir}/sysconfig/virtlogd %config(noreplace) %{_sysconfdir}/sysconfig/virtlockd %config(noreplace) %{_sysconfdir}/libvirt/libvirtd.conf %config(noreplace) %{_sysconfdir}/libvirt/virtproxyd.conf %config(noreplace) %{_sysconfdir}/libvirt/virtlogd.conf %config(noreplace) %{_sysconfdir}/libvirt/virtlockd.conf %config(noreplace) %{_sysconfdir}/sasl2/libvirt.conf %config(noreplace) %{_prefix}/lib/sysctl.d/60-libvirtd.conf %config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd %dir %{_datadir}/libvirt/ %ghost %dir %{_rundir}/libvirt/ %dir %attr(0711, root, root) %{_localstatedir}/lib/libvirt/images/ %dir %attr(0711, root, root) %{_localstatedir}/lib/libvirt/filesystems/ %dir %attr(0711, root, root) %{_localstatedir}/lib/libvirt/boot/ %dir %attr(0711, root, root) %{_localstatedir}/cache/libvirt/ %dir %attr(0755, root, root) %{_libdir}/libvirt/ %dir %attr(0755, root, root) %{_libdir}/libvirt/connection-driver/ %dir %attr(0755, root, root) %{_libdir}/libvirt/lock-driver %attr(0755, root, root) %{_libdir}/libvirt/lock-driver/lockd.so %{_datadir}/augeas/lenses/libvirtd.aug %{_datadir}/augeas/lenses/tests/test_libvirtd.aug %{_datadir}/augeas/lenses/virtlogd.aug %{_datadir}/augeas/lenses/tests/test_virtlogd.aug %{_datadir}/augeas/lenses/virtlockd.aug %{_datadir}/augeas/lenses/tests/test_virtlockd.aug %{_datadir}/augeas/lenses/virtproxyd.aug %{_datadir}/augeas/lenses/tests/test_virtproxyd.aug %{_datadir}/augeas/lenses/libvirt_lockd.aug %if %{with_qemu} %{_datadir}/augeas/lenses/tests/test_libvirt_lockd.aug %endif %{_datadir}/polkit-1/actions/org.libvirt.unix.policy %{_datadir}/polkit-1/actions/org.libvirt.api.policy %{_datadir}/polkit-1/rules.d/50-libvirt.rules %dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/ %attr(0755, root, root) %{_libexecdir}/libvirt_iohelper %attr(0755, root, root) %{_sbindir}/libvirtd %attr(0755, root, root) %{_sbindir}/virtproxyd %attr(0755, root, root) %{_sbindir}/virtlogd %attr(0755, root, root) %{_sbindir}/virtlockd %{_mandir}/man8/libvirtd.8* %{_mandir}/man8/virtlogd.8* %{_mandir}/man8/virtlockd.8* %{_mandir}/man7/virkey*.7* %files daemon-config-network %dir %{_datadir}/libvirt/networks/ %{_datadir}/libvirt/networks/default.xml %ghost %{_sysconfdir}/libvirt/qemu/networks/default.xml %ghost %{_sysconfdir}/libvirt/qemu/networks/autostart/default.xml %files daemon-config-nwfilter %dir %{_datadir}/libvirt/nwfilter/ %{_datadir}/libvirt/nwfilter/*.xml %ghost %{_sysconfdir}/libvirt/nwfilter/*.xml %files daemon-driver-interface %config(noreplace) %{_sysconfdir}/libvirt/virtinterfaced.conf %{_datadir}/augeas/lenses/virtinterfaced.aug %{_datadir}/augeas/lenses/tests/test_virtinterfaced.aug %{_unitdir}/virtinterfaced.service %{_unitdir}/virtinterfaced.socket %{_unitdir}/virtinterfaced-ro.socket %{_unitdir}/virtinterfaced-admin.socket %attr(0755, root, root) %{_sbindir}/virtinterfaced %{_libdir}/%{name}/connection-driver/libvirt_driver_interface.so %files daemon-driver-network %config(noreplace) %{_sysconfdir}/libvirt/virtnetworkd.conf %{_datadir}/augeas/lenses/virtnetworkd.aug %{_datadir}/augeas/lenses/tests/test_virtnetworkd.aug %{_unitdir}/virtnetworkd.service %{_unitdir}/virtnetworkd.socket %{_unitdir}/virtnetworkd-ro.socket %{_unitdir}/virtnetworkd-admin.socket %attr(0755, root, root) %{_sbindir}/virtnetworkd %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/ %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/networks/ %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/networks/autostart %ghost %dir %{_rundir}/libvirt/network/ %dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/network/ %dir %attr(0755, root, root) %{_localstatedir}/lib/libvirt/dnsmasq/ %attr(0755, root, root) %{_libexecdir}/libvirt_leaseshelper %{_libdir}/%{name}/connection-driver/libvirt_driver_network.so %if %{with_firewalld_zone} %{_prefix}/lib/firewalld/zones/libvirt.xml %endif %files daemon-driver-nodedev %config(noreplace) %{_sysconfdir}/libvirt/virtnodedevd.conf %{_datadir}/augeas/lenses/virtnodedevd.aug %{_datadir}/augeas/lenses/tests/test_virtnodedevd.aug %{_unitdir}/virtnodedevd.service %{_unitdir}/virtnodedevd.socket %{_unitdir}/virtnodedevd-ro.socket %{_unitdir}/virtnodedevd-admin.socket %attr(0755, root, root) %{_sbindir}/virtnodedevd %{_libdir}/%{name}/connection-driver/libvirt_driver_nodedev.so %files daemon-driver-nwfilter %config(noreplace) %{_sysconfdir}/libvirt/virtnwfilterd.conf %{_datadir}/augeas/lenses/virtnwfilterd.aug %{_datadir}/augeas/lenses/tests/test_virtnwfilterd.aug %{_unitdir}/virtnwfilterd.service %{_unitdir}/virtnwfilterd.socket %{_unitdir}/virtnwfilterd-ro.socket %{_unitdir}/virtnwfilterd-admin.socket %attr(0755, root, root) %{_sbindir}/virtnwfilterd %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/nwfilter/ %ghost %dir %{_rundir}/libvirt/network/ %{_libdir}/%{name}/connection-driver/libvirt_driver_nwfilter.so %files daemon-driver-secret %config(noreplace) %{_sysconfdir}/libvirt/virtsecretd.conf %{_datadir}/augeas/lenses/virtsecretd.aug %{_datadir}/augeas/lenses/tests/test_virtsecretd.aug %{_unitdir}/virtsecretd.service %{_unitdir}/virtsecretd.socket %{_unitdir}/virtsecretd-ro.socket %{_unitdir}/virtsecretd-admin.socket %attr(0755, root, root) %{_sbindir}/virtsecretd %{_libdir}/%{name}/connection-driver/libvirt_driver_secret.so %files daemon-driver-storage %files daemon-driver-storage-core %config(noreplace) %{_sysconfdir}/libvirt/virtstoraged.conf %{_datadir}/augeas/lenses/virtstoraged.aug %{_datadir}/augeas/lenses/tests/test_virtstoraged.aug %{_unitdir}/virtstoraged.service %{_unitdir}/virtstoraged.socket %{_unitdir}/virtstoraged-ro.socket %{_unitdir}/virtstoraged-admin.socket %attr(0755, root, root) %{_sbindir}/virtstoraged %attr(0755, root, root) %{_libexecdir}/libvirt_parthelper %{_libdir}/%{name}/connection-driver/libvirt_driver_storage.so %{_libdir}/%{name}/storage-backend/libvirt_storage_backend_fs.so %{_libdir}/%{name}/storage-file/libvirt_storage_file_fs.so %files daemon-driver-storage-disk %{_libdir}/%{name}/storage-backend/libvirt_storage_backend_disk.so %files daemon-driver-storage-logical %{_libdir}/%{name}/storage-backend/libvirt_storage_backend_logical.so %files daemon-driver-storage-scsi %{_libdir}/%{name}/storage-backend/libvirt_storage_backend_scsi.so %files daemon-driver-storage-iscsi %{_libdir}/%{name}/storage-backend/libvirt_storage_backend_iscsi.so %if %{with_storage_iscsi_direct} %files daemon-driver-storage-iscsi-direct %{_libdir}/%{name}/storage-backend/libvirt_storage_backend_iscsi-direct.so %endif %files daemon-driver-storage-mpath %{_libdir}/%{name}/storage-backend/libvirt_storage_backend_mpath.so %if %{with_storage_gluster} %files daemon-driver-storage-gluster %{_libdir}/%{name}/storage-backend/libvirt_storage_backend_gluster.so %{_libdir}/%{name}/storage-file/libvirt_storage_file_gluster.so %endif %if %{with_storage_rbd} %files daemon-driver-storage-rbd %{_libdir}/%{name}/storage-backend/libvirt_storage_backend_rbd.so %endif %if %{with_storage_sheepdog} %files daemon-driver-storage-sheepdog %{_libdir}/%{name}/storage-backend/libvirt_storage_backend_sheepdog.so %endif %if %{with_storage_zfs} %files daemon-driver-storage-zfs %{_libdir}/%{name}/storage-backend/libvirt_storage_backend_zfs.so %endif %if %{with_qemu} %files daemon-driver-qemu %config(noreplace) %{_sysconfdir}/libvirt/virtqemud.conf %{_datadir}/augeas/lenses/virtqemud.aug %{_datadir}/augeas/lenses/tests/test_virtqemud.aug %{_unitdir}/virtqemud.service %{_unitdir}/virtqemud.socket %{_unitdir}/virtqemud-ro.socket %{_unitdir}/virtqemud-admin.socket %attr(0755, root, root) %{_sbindir}/virtqemud %dir %attr(0700, root, root) %{_sysconfdir}/libvirt/qemu/ %dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/qemu/ %config(noreplace) %{_sysconfdir}/libvirt/qemu.conf %config(noreplace) %{_sysconfdir}/libvirt/qemu-lockd.conf %config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd.qemu %ghost %dir %{_rundir}/libvirt/qemu/ %dir %attr(0751, %{qemu_user}, %{qemu_group}) %{_localstatedir}/lib/libvirt/qemu/ %dir %attr(0750, %{qemu_user}, %{qemu_group}) %{_localstatedir}/cache/libvirt/qemu/ %{_datadir}/augeas/lenses/libvirtd_qemu.aug %{_datadir}/augeas/lenses/tests/test_libvirtd_qemu.aug %{_libdir}/%{name}/connection-driver/libvirt_driver_qemu.so %dir %attr(0711, root, root) %{_localstatedir}/lib/libvirt/swtpm/ %dir %attr(0711, root, root) %{_localstatedir}/log/swtpm/libvirt/qemu/ %endif %if %{with_lxc} %files daemon-driver-lxc %config(noreplace) %{_sysconfdir}/libvirt/virtlxcd.conf %{_datadir}/augeas/lenses/virtlxcd.aug %{_datadir}/augeas/lenses/tests/test_virtlxcd.aug %{_unitdir}/virtlxcd.service %{_unitdir}/virtlxcd.socket %{_unitdir}/virtlxcd-ro.socket %{_unitdir}/virtlxcd-admin.socket %attr(0755, root, root) %{_sbindir}/virtlxcd %dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/lxc/ %config(noreplace) %{_sysconfdir}/libvirt/lxc.conf %config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd.lxc %ghost %dir %{_rundir}/libvirt/lxc/ %dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/lxc/ %{_datadir}/augeas/lenses/libvirtd_lxc.aug %{_datadir}/augeas/lenses/tests/test_libvirtd_lxc.aug %attr(0755, root, root) %{_libexecdir}/libvirt_lxc %{_libdir}/%{name}/connection-driver/libvirt_driver_lxc.so %endif %if %{with_libxl} %files daemon-driver-libxl %config(noreplace) %{_sysconfdir}/libvirt/virtxend.conf %{_datadir}/augeas/lenses/virtxend.aug %{_datadir}/augeas/lenses/tests/test_virtxend.aug %{_unitdir}/virtxend.service %{_unitdir}/virtxend.socket %{_unitdir}/virtxend-ro.socket %{_unitdir}/virtxend-admin.socket %attr(0755, root, root) %{_sbindir}/virtxend %config(noreplace) %{_sysconfdir}/libvirt/libxl.conf %config(noreplace) %{_sysconfdir}/logrotate.d/libvirtd.libxl %config(noreplace) %{_sysconfdir}/libvirt/libxl-lockd.conf %{_datadir}/augeas/lenses/libvirtd_libxl.aug %{_datadir}/augeas/lenses/tests/test_libvirtd_libxl.aug %dir %attr(0700, root, root) %{_localstatedir}/log/libvirt/libxl/ %ghost %dir %{_rundir}/libvirt/libxl/ %dir %attr(0700, root, root) %{_localstatedir}/lib/libvirt/libxl/ %{_libdir}/%{name}/connection-driver/libvirt_driver_libxl.so %endif %if %{with_vbox} %files daemon-driver-vbox %config(noreplace) %{_sysconfdir}/libvirt/virtvboxd.conf %{_datadir}/augeas/lenses/virtvboxd.aug %{_datadir}/augeas/lenses/tests/test_virtvboxd.aug %{_unitdir}/virtvboxd.service %{_unitdir}/virtvboxd.socket %{_unitdir}/virtvboxd-ro.socket %{_unitdir}/virtvboxd-admin.socket %attr(0755, root, root) %{_sbindir}/virtvboxd %{_libdir}/%{name}/connection-driver/libvirt_driver_vbox.so %endif %if %{with_qemu_tcg} %files daemon-qemu %endif %if %{with_qemu_kvm} %files daemon-kvm %endif %if %{with_lxc} %files daemon-lxc %endif %if %{with_libxl} %files daemon-xen %endif %if %{with_vbox} %files daemon-vbox %endif %if %{with_sanlock} %files lock-sanlock %if %{with_qemu} %config(noreplace) %{_sysconfdir}/libvirt/qemu-sanlock.conf %endif %if %{with_libxl} %config(noreplace) %{_sysconfdir}/libvirt/libxl-sanlock.conf %endif %attr(0755, root, root) %{_libdir}/libvirt/lock-driver/sanlock.so %{_datadir}/augeas/lenses/libvirt_sanlock.aug %{_datadir}/augeas/lenses/tests/test_libvirt_sanlock.aug %dir %attr(0770, root, sanlock) %{_localstatedir}/lib/libvirt/sanlock %{_sbindir}/virt-sanlock-cleanup %{_mandir}/man8/virt-sanlock-cleanup.8* %attr(0755, root, root) %{_libexecdir}/libvirt_sanlock_helper %endif %files client %{_mandir}/man1/virsh.1* %{_mandir}/man1/virt-xml-validate.1* %{_mandir}/man1/virt-pki-validate.1* %{_mandir}/man1/virt-host-validate.1* %{_bindir}/virsh %{_bindir}/virt-xml-validate %{_bindir}/virt-pki-validate %{_bindir}/virt-host-validate %{_datadir}/systemtap/tapset/libvirt_probes*.stp %{_datadir}/systemtap/tapset/libvirt_functions.stp %if %{with_qemu} %{_datadir}/systemtap/tapset/libvirt_qemu_probes*.stp %endif %if %{with_bash_completion} %{_datadir}/bash-completion/completions/virsh %endif %{_unitdir}/libvirt-guests.service %config(noreplace) %{_sysconfdir}/sysconfig/libvirt-guests %attr(0755, root, root) %{_libexecdir}/libvirt-guests.sh %files libs -f %{_vpath_builddir}/%{name}.lang %license COPYING COPYING.LESSER %config(noreplace) %{_sysconfdir}/libvirt/libvirt.conf %config(noreplace) %{_sysconfdir}/libvirt/libvirt-admin.conf %{_libdir}/libvirt.so.* %{_libdir}/libvirt-qemu.so.* %{_libdir}/libvirt-lxc.so.* %{_libdir}/libvirt-admin.so.* %dir %{_datadir}/libvirt/ %dir %{_datadir}/libvirt/schemas/ %dir %attr(0755, root, root) %{_localstatedir}/lib/libvirt/ %{_datadir}/libvirt/schemas/basictypes.rng %{_datadir}/libvirt/schemas/capability.rng %{_datadir}/libvirt/schemas/cputypes.rng %{_datadir}/libvirt/schemas/domain.rng %{_datadir}/libvirt/schemas/domainbackup.rng %{_datadir}/libvirt/schemas/domaincaps.rng %{_datadir}/libvirt/schemas/domaincheckpoint.rng %{_datadir}/libvirt/schemas/domaincommon.rng %{_datadir}/libvirt/schemas/domainsnapshot.rng %{_datadir}/libvirt/schemas/interface.rng %{_datadir}/libvirt/schemas/network.rng %{_datadir}/libvirt/schemas/networkcommon.rng %{_datadir}/libvirt/schemas/networkport.rng %{_datadir}/libvirt/schemas/nodedev.rng %{_datadir}/libvirt/schemas/nwfilter.rng %{_datadir}/libvirt/schemas/nwfilter_params.rng %{_datadir}/libvirt/schemas/nwfilterbinding.rng %{_datadir}/libvirt/schemas/secret.rng %{_datadir}/libvirt/schemas/storagecommon.rng %{_datadir}/libvirt/schemas/storagepool.rng %{_datadir}/libvirt/schemas/storagepoolcaps.rng %{_datadir}/libvirt/schemas/storagevol.rng %{_datadir}/libvirt/cpu_map/*.xml %{_datadir}/libvirt/test-screenshot.png %files admin %{_mandir}/man1/virt-admin.1* %{_bindir}/virt-admin %if %{with_bash_completion} %{_datadir}/bash-completion/completions/virt-admin %endif %if %{with_bash_completion} %files bash-completion %{_datadir}/bash-completion/completions/vsh %endif %if %{with_wireshark} %files wireshark %{wireshark_plugindir}/libvirt.so %endif %files nss %{_libdir}/libnss_libvirt.so.2 %{_libdir}/libnss_libvirt_guest.so.2 %if %{with_lxc} %files login-shell %attr(4750, root, virtlogin) %{_bindir}/virt-login-shell %{_libexecdir}/virt-login-shell-helper %config(noreplace) %{_sysconfdir}/libvirt/virt-login-shell.conf %{_mandir}/man1/virt-login-shell.1* %endif %files devel %{_libdir}/libvirt.so %{_libdir}/libvirt-admin.so %{_libdir}/libvirt-qemu.so %{_libdir}/libvirt-lxc.so %dir %{_includedir}/libvirt %{_includedir}/libvirt/virterror.h %{_includedir}/libvirt/libvirt.h %{_includedir}/libvirt/libvirt-admin.h %{_includedir}/libvirt/libvirt-common.h %{_includedir}/libvirt/libvirt-domain.h %{_includedir}/libvirt/libvirt-domain-checkpoint.h %{_includedir}/libvirt/libvirt-domain-snapshot.h %{_includedir}/libvirt/libvirt-event.h %{_includedir}/libvirt/libvirt-host.h %{_includedir}/libvirt/libvirt-interface.h %{_includedir}/libvirt/libvirt-network.h %{_includedir}/libvirt/libvirt-nodedev.h %{_includedir}/libvirt/libvirt-nwfilter.h %{_includedir}/libvirt/libvirt-secret.h %{_includedir}/libvirt/libvirt-storage.h %{_includedir}/libvirt/libvirt-stream.h %{_includedir}/libvirt/libvirt-qemu.h %{_includedir}/libvirt/libvirt-lxc.h %{_libdir}/pkgconfig/libvirt.pc %{_libdir}/pkgconfig/libvirt-admin.pc %{_libdir}/pkgconfig/libvirt-qemu.pc %{_libdir}/pkgconfig/libvirt-lxc.pc %dir %{_datadir}/libvirt/api/ %{_datadir}/libvirt/api/libvirt-api.xml %{_datadir}/libvirt/api/libvirt-admin-api.xml %{_datadir}/libvirt/api/libvirt-qemu-api.xml %{_datadir}/libvirt/api/libvirt-lxc-api.xml %changelog * Thu Mar 4 2021 Jiri Denemark - 6.0.0-35 - vircgroupv2: properly detect placement of running VM (rhbz#1798463) - virsystemd: export virSystemdHasMachined (rhbz#1798463) - virsystemd: introduce virSystemdGetMachineByPID (rhbz#1798463) - virsystemd: introduce virSystemdGetMachineUnitByPID (rhbz#1798463) - vircgroup: use DBus call to systemd for some APIs (rhbz#1798463) - vircgroupv1: refactor virCgroupV1DetectPlacement (rhbz#1798463) - vircgroupv2: move task into cgroup before enabling controllers (rhbz#1798463) - vircgroup: introduce virCgroupV1Exists and virCgroupV2Exists (rhbz#1798463) - vircgroup: introduce nested cgroup to properly work with systemd (rhbz#1798463) - tests: add cgroup nested tests (rhbz#1798463) - vircgroup: correctly free nested virCgroupPtr (rhbz#1798463) - qemu: Add virtio related options to vsock (rhbz#1931548) - domain_validate: use defines for cpu period and quota limits (rhbz#1798463) - docs: use proper cpu quota value in our documentation (rhbz#1798463) - vircgroup: enforce range limit for cpu.shares (rhbz#1798463) - cgroup: use virCgroupSetCpuShares instead of virCgroupSetupCpuShares (rhbz#1798463) - cpumap: Add support for ibrs CPU feature (rhbz#1926864) - cpumap: Add support for svme-addr-check CPU feature (rhbz#1926864) - cpu_map: Add EPYC-Milan x86 CPU model (rhbz#1926864) - cpu_map: Install x86_EPYC-Milan.xml (rhbz#1926864) - cpu_map: Fix spelling of svme-addr-chk feature (rhbz#1926864) * Mon Feb 1 2021 Jiri Denemark - 6.0.0-34 - qemu: move cgroup cpu period and quota defines to vircgroup.h (rhbz#1915733) - vircgroupv1: use defines for cpu period and quota limits (rhbz#1915733) - vircgroupv2: use defines for cpu period and quota limits (rhbz#1915733) - vircgroup: fix cpu quota maximum limit (rhbz#1915733) - util: add virNetDevGetPhysPortName (rhbz#1918708) - util: avoid manual VIR_FREE of a g_autofree pointer in virPCIGetName() (rhbz#1918708) - util: Add phys_port_name support on virPCIGetNetName (rhbz#1918708) * Thu Jan 21 2021 Jiri Denemark - 6.0.0-33 - cpu_map: Fix Icelake Server model number (rhbz#1537734) - cputestdata: Add test data for Snowridge (rhbz#1537734) - cpu_map: Add support for fsrm CPU feature (rhbz#1537734) - cpu_map: Add support for core-capability CPU feature (rhbz#1537734) - cpu_map: Add support for split-lock-detect CPU feature (rhbz#1537734) - cpu_map: Define and enable Snowridge model (rhbz#1537734) - util: fix typo in VIR_MOCK_WRAP_RET_ARGS() (rhbz#1607929) - util/tests: enable locking on iptables/ebtables commandlines in unit tests (rhbz#1607929) - util/tests: enable locking on iptables/ebtables commandlines by default (rhbz#1607929) - tests: fix iptables test case commandline options in virfirewalltest.c (rhbz#1607929) - network: be more verbose about the reason for a firewall reload (rhbz#1607929) - util: always check for ebtables/iptables binaries, even when using firewalld (rhbz#1607929) - util: synchronize with firewalld before we start calling iptables directly (rhbz#1607929) - util: call iptables directly rather than via firewalld (rhbz#1607929) - util: virhostcpu: Fail when fetching CPU Stats for invalid cpu (rhbz#1915183) * Tue Dec 15 2020 Jiri Denemark - 6.0.0-32 - util: replace macvtap name reservation bitmap with a simple counter (rhbz#1874304) - util: assign tap device names using a monotonically increasing integer (rhbz#1874304) - util: virNetDevTapCreate: initialize fd to -1 (rhbz#1874304) * Thu Dec 10 2020 Jiri Denemark - 6.0.0-31 - conf: properly clear out autogenerated macvtap names when formatting/parsing (rhbz#1872610) - qemu: format 'ramfb' attribute for mediated devices (rhbz#1876297) * Mon Nov 9 2020 Jiri Denemark - 6.0.0-30 - cpu_map: Add missing x86 features in 0x7 CPUID leaf (rhbz#1861506) - cpu_map: Add missing x86 features in 0x80000008 CPUID leaf (rhbz#1861506) - cpu_map: Add missing AMD SVM features (rhbz#1861506) - Add testdata for AMD EPYC 7502 (rhbz#1861506) - cpu_map: Defined and enable EPYC-Rome model (rhbz#1861506) - cpu_map: Remove monitor feature from EPYC-Rome (rhbz#1861506) - tests: qemuxml2argv: Use existing machine type for 'numatune-distances' case (rhbz#1749518) - qemuxml2xmltest: Add "numatune-distance" test case (rhbz#1749518) - conf: Move and rename virDomainParseScaledValue() (rhbz#1749518) - numa_conf: Drop CPU from name of two functions (rhbz#1749518) - qemu_command: Rename qemuBuildNumaArgStr() (rhbz#1749518) - qemuBuildMachineCommandLine: Drop needless check (rhbz#1749518) - numa_conf: Make virDomainNumaSetNodeCpumask() return void (rhbz#1749518) - Allow NUMA nodes without vCPUs (rhbz#1749518) - conf: Parse and format HMAT (rhbz#1749518) - conf: Validate NUMA HMAT configuration (rhbz#1749518) - numa: expose HMAT APIs (rhbz#1749518) - qemu: Introduce QEMU_CAPS_NUMA_HMAT capability (rhbz#1749518) - qemu: Build HMAT command line (rhbz#1749518) - qemuBuildNumaCommandLine: Fix @masterInitiator check (rhbz#1749518) - numa_conf: Properly check for caches in virDomainNumaDefValidate() (rhbz#1749518) - RNG: Allow interleaving of /domain/cpu/numa/cell children (rhbz#1749518) * Fri Oct 9 2020 Jiri Denemark - 6.0.0-29 - qemu: substitute missing model name for host-passthrough (rhbz#1850680) - rpc: gendispatch: handle empty flags (CVE-2020-25637) - rpc: add support for filtering @acls by uint params (CVE-2020-25637) - rpc: require write acl for guest agent in virDomainInterfaceAddresses (CVE-2020-25637) - qemu: agent: set ifname to NULL after freeing (CVE-2020-25637) - qemu: Fix domfsinfo for non-PCI device information from guest agent (rhbz#1858771) - virDomainNetFindIdx: add support for CCW addresses (rhbz#1837495) - check for NULL before calling g_regex_unref (rhbz#1861176) - virhostcpu.c: fix 'die_id' parsing for Power hosts (rhbz#1876742) - qemuFirmwareFillDomain: Fill NVRAM template on migration too (rhbz#1880418) - node_device: refactor udevProcessCCW (rhbz#1853289, rhbz#1865932) - node_device: detect CSS devices (rhbz#1853289, rhbz#1865932) - virsh: nodedev: ability to filter CSS capabilities (rhbz#1853289, rhbz#1865932) - node_device: detect DASD devices (rhbz#1853289, rhbz#1865932) - udevProcessCSS: Check if def->driver is non-NULL (rhbz#1853289, rhbz#1865932) * Wed Aug 26 2020 Jiri Denemark - 6.0.0-28 - virdevmapper: Don't cache device-mapper major (rhbz#1860421) - virdevmapper: Handle kernel without device-mapper support (rhbz#1860421) - virdevmapper: Ignore all errors when opening /dev/mapper/control (rhbz#1860421) * Fri Aug 7 2020 Jiri Denemark - 6.0.0-27 - src: assume sys/sysmacros.h always exists on Linux (rhbz#1860421) - virdevmapper.c: Join two WITH_DEVMAPPER sections together (rhbz#1860421) - virDevMapperGetTargetsImpl: Use VIR_AUTOSTRINGLIST (rhbz#1860421) - virdevmapper: Don't use libdevmapper to obtain dependencies (CVE-2020-14339, rhbz#1860421) - virDevMapperGetTargets: Don't ignore EBADF (rhbz#1860421) * Fri Jul 24 2020 Jiri Denemark - 6.0.0-26 - qemu: blockjob: Don't base bitmap handling of active-layer block commit on QEMU_CAPS_BLOCKDEV_REOPEN (rhbz#1857779) - qemu: blockjob: Actually delete temporary bitmap on failed active commit (rhbz#1857779) - qemu: block: Remove 'active-write' bitmap even if there are no bitmaps to merge (rhbz#1857779) - qemuDomainBlockPivot: Rename 'actions' to 'bitmapactions' (rhbz#1857779) - qemuDomainBlockPivot: Ignore failures of creating active layer bitmap (rhbz#1857779) * Wed Jun 24 2020 Jiri Denemark - 6.0.0-25 - Upgrade components in virt:rhel module:stream for RHEL-8.3 release (rhbz#1828317) - conf: Don't format http cookies unless VIR_DOMAIN_DEF_FORMAT_SECURE is used (CVE-2020-14301) - util: Introduce a parser for kernel cmdline arguments (rhbz#1848997) - qemu: Check if s390 secure guest support is enabled (rhbz#1848997) - qemu: Check if AMD secure guest support is enabled (rhbz#1848997) - tools: Secure guest check on s390 in virt-host-validate (rhbz#1848997) - tools: Secure guest check for AMD in virt-host-validate (rhbz#1848997) - docs: Update AMD launch secure description (rhbz#1848997) - docs: Describe protected virtualization guest setup (rhbz#1848997) * Fri Jun 19 2020 Danilo C. L. de Paula - 6.0.0 - Resolves: bz#1828317 (Upgrade components in virt:rhel module:stream for RHEL-8.3 release) * Tue Jun 09 2020 Danilo C. L. de Paula - 6.0.0 - Resolves: bz#1810193 (Upgrade components in virt:rhel module:stream for RHEL-8.3 release) * Fri Jun 05 2020 Danilo C. L. de Paula - 6.0.0 - Resolves: bz#1810193 (Upgrade components in virt:rhel module:stream for RHEL-8.3 release) * Mon Apr 27 2020 Danilo C. L. de Paula - 6.0.0 - Resolves: bz#1810193 (Upgrade components in virt:rhel module:stream for RHEL-8.3 release) * Mon Mar 16 2020 Jiri Denemark - 4.5.0-42 - RHEL: virscsi: Check device type before getting it's /dev node name (rhbz#1808388) - RHEL: virscsi: Support TAPEs in virSCSIDeviceGetDevName() (rhbz#1808388) - RHEL: virscsi: Introduce and use virSCSIDeviceGetUnprivSGIOSysfsPath() (rhbz#1808388) - RHEL: virutil: Accept non-block devices in virGetDeviceID() (rhbz#1808388) - RHEL: qemuSetUnprivSGIO: Actually use calculated @sysfs_path to set unpriv_sgio (rhbz#1808388) - RHEL: qemuCheckUnprivSGIO: use @sysfs_path to get unpriv_sgio (rhbz#1808399) * Wed Mar 4 2020 Jiri Denemark - 4.5.0-41 - qemu: Translate features in virQEMUCapsGetCPUFeatures (rhbz#1804224) * Mon Feb 17 2020 Jiri Denemark - 4.5.0-40 - process: wait longer on kill per assigned Hostdev (rhbz#1785338) - process: wait longer 5->30s on hard shutdown (rhbz#1785338) * Mon Feb 10 2020 Jiri Denemark - 4.5.0-39 - selinux: Do not report an error when not returning -1 (rhbz#1788096) - qemu: Fix hyperv features with QEMU 4.1 (rhbz#1794868) - qemu: Prefer dashes for hyperv features (rhbz#1794868) - cpu: Drop KVM_ from hyperv feature macros (rhbz#1794868) - cpu: Drop unused KVM features (rhbz#1794868) - qemu: Fix KVM features with QEMU 4.1 (rhbz#1794868) - cpu: Drop CPUID definition for hv-spinlocks (rhbz#1794868) * Tue Jan 14 2020 Jiri Denemark - 4.5.0-38 - cpu_map/x86: Add support for BFLOAT16 data type (rhbz#1749516) * Fri Dec 13 2019 Jiri Denemark - 4.5.0-37 - cpu_map: Add TAA_NO bit for IA32_ARCH_CAPABILITIES MSR (CVE-2019-11135) - cpu_map: Add TSX_CTRL bit for IA32_ARCH_CAPABILITIES MSR (CVE-2019-11135) * Thu Nov 21 2019 Jiri Denemark - 4.5.0-36 - cpu_conf: Pass policy to CPU feature filtering callbacks (rhbz#1749672, rhbz#1756156, rhbz#1721608) - qemuxml2*test: Add tests for Icelake-Server, -pconfig (rhbz#1749672, rhbz#1756156, rhbz#1721608) - qemu: Drop disabled CPU features unknown to QEMU (rhbz#1749672, rhbz#1756156, rhbz#1721608) - cputest: Add data for Ice Lake Server CPU (rhbz#1749672, rhbz#1756156, rhbz#1721608) - cpu_map: Drop pconfig from Icelake-Server CPU model (rhbz#1749672, rhbz#1756156, rhbz#1721608) - qemu: Fix NULL ptr dereference caused by qemuDomainDefFormatBufInternal (rhbz#1749672, rhbz#1756156, rhbz#1721608) * Mon Sep 16 2019 Jiri Denemark - 4.5.0-35 - vircgroupv2: fix setting cpu.max period (rhbz#1749227) * Wed Sep 4 2019 Jiri Denemark - 4.5.0-34 - vircgroupv2: fix abort in VIR_AUTOFREE (rhbz#1747440) * Mon Aug 26 2019 Jiri Denemark - 4.5.0-33 - vircgroupv2: fix parsing multiple values in single file (rhbz#1741825) - vircgroupv2: fix virCgroupV2GetCpuCfsQuota for "max" value (rhbz#1741837) * Mon Aug 19 2019 Jiri Denemark - 4.5.0-32 - virDomainObjListAddLocked: Produce better error message than 'Duplicate key' (rhbz#1737790) - virdbus: Grab a ref as long as the while loop is executed (rhbz#1741900) * Tue Jul 30 2019 Jiri Denemark - 4.5.0-31 - virDomainObjListAddLocked: fix double free (rhbz#1728530) - docs: schemas: Decouple the virtio options from each other (rhbz#1729675) - util: command: use VIR_AUTOFREE instead of VIR_FREE for scalar types (rhbz#1721434) - util: command: define cleanup function using VIR_DEFINE_AUTOPTR_FUNC (rhbz#1721434) - util: netdevopenvswitch: use VIR_AUTOFREE instead of VIR_FREE for scalar types (rhbz#1721434) - util: virnetdevopenvswitch: Drop an unused variable @ovs_timeout (rhbz#1721434) - util: netdevopenvswitch: use VIR_AUTOPTR for aggregate types (rhbz#1721434) - util: suppress unimportant ovs-vsctl errors when getting interface stats (rhbz#1721434) - virNetDevOpenvswitchInterfaceStats: Optimize for speed (rhbz#1721434) - test: Introduce virnetdevopenvswitchtest (rhbz#1721434) - vircommand: Separate mass FD closing into a function (rhbz#1721434) - virCommand: use procfs to learn opened FDs (rhbz#1721434) - util: command: Ignore bitmap errors when enumerating file descriptors to close (rhbz#1721434) - util: Avoid possible error in virCommandMassClose (rhbz#1721434) - vircgroup: fix cgroups v2 controllers detection (rhbz#1689297) - vircgroupv2: store enabled controllers (rhbz#1689297) * Wed Jul 3 2019 Jiri Denemark - 4.5.0-30 - virWaitForDevices: Drop confusing part of comment (rhbz#1710575) - lib: Drop UDEVSETTLE (rhbz#1710575) - m4: Provide default value fore UDEVADM (rhbz#1710575) - m4: Drop needless string checks (rhbz#1710575) - util: vircgroup: introduce virCgroup(Get|Set)ValueRaw (rhbz#1658890) - util: vircgroup: move virCgroupGetValueStr out of virCgroupGetValueForBlkDev (rhbz#1658890) - util: vircgroupv1: add support for BFQ blkio files (rhbz#1658890) - util: vircgroupv2: add support for BFQ files (rhbz#1658890) - Handle copying bitmaps to larger data buffers (rhbz#1703160) * Tue Jul 2 2019 Jiri Denemark - 4.5.0-29 - cpu: allow include files for CPU definition (rhbz#1686895) - cpu: fix cleanup when signature parsing fails (rhbz#1686895) - cpu: push more parsing logic into common code (rhbz#1686895) - cpu: simplify failure cleanup paths (rhbz#1686895) - cpu_map: Add support for arch-capabilities feature (rhbz#1693433) - cputest: Add data for Intel(R) Xeon(R) CPU E5-2630 v4 (rhbz#1686895) - cputest: Add data for Intel(R) Core(TM) i7-7600U (rhbz#1686895) - cputest: Add data for Intel(R) Xeon(R) CPU E7540 (rhbz#1686895) - cputest: Add data for Intel(R) Xeon(R) CPU E5-2650 (rhbz#1686895) - cputest: Add data for Intel(R) Core(TM) i7-8700 (rhbz#1686895) - cpu_x86: Separate ancestor model parsing from x86ModelParse (rhbz#1686895) - cpu_x86: Separate signature parsing from x86ModelParse (rhbz#1686895) - cpu_x86: Separate vendor parsing from x86ModelParse (rhbz#1686895) - cpu_x86: Separate feature list parsing from x86ModelParse (rhbz#1686895) - cpu_x86: Make sure CPU model names are unique in cpu_map (rhbz#1686895) - cpu_x86: Add x86ModelCopySignatures helper (rhbz#1686895) - cpu_x86: Store CPU signature in an array (rhbz#1686895) - cpu_x86: Allow multiple signatures for a CPU model (rhbz#1686895) - cpu_x86: Log decoded CPU model and signatures (rhbz#1686895) - qemu_capabilities: Inroduce virQEMUCapsGetCPUModelX86Data (rhbz#1686895) - qemu_capabilities: Introduce virQEMUCapsGetCPUModelInfo (rhbz#1686895) - qemu_capabilities: Use virQEMUCapsGetCPUModelInfo (rhbz#1686895) - cpu_x86: Add virCPUx86DataGetSignature for tests (rhbz#1686895) - cpu_map: Add hex representation of signatures (rhbz#1686895) - cputest: Test CPU signatures (rhbz#1686895) - cpu_map: Add more signatures for Conroe CPU model (rhbz#1686895) - cpu_map: Add more signatures for Penryn CPU model (rhbz#1686895) - cpu_map: Add more signatures for Nehalem CPU models (rhbz#1686895) - cpu_map: Add more signatures for Westmere CPU model (rhbz#1686895) - cpu_map: Add more signatures for SandyBridge CPU models (rhbz#1686895) - cpu_map: Add more signatures for IvyBridge CPU models (rhbz#1686895) - cpu_map: Add more signatures for Haswell CPU models (rhbz#1686895) - cpu_map: Add more signatures for Broadwell CPU models (rhbz#1686895) - cpu_map: Add more signatures for Skylake-Client CPU models (rhbz#1686895) - cpu: Don't access invalid memory in virCPUx86Translate (rhbz#1686895) - cpu_x86: Require within in CPU map (rhbz#1697627) - cputest: Add data for Intel(R) Xeon(R) Platinum 8268 CPU (rhbz#1693433) - cpu_map: Add Cascadelake-Server CPU model (rhbz#1693433) - cpu_x86: Introduce virCPUx86DataItem container struct (rhbz#1697627) - cpu_x86: Rename virCPUx86Vendor.cpuid (rhbz#1697627) - cpu_x86: Rename virCPUx86DataItem variables (rhbz#1697627) - cpu_x86: Rename x86DataCpuidNext function (rhbz#1697627) - cpu_x86: Rename x86DataCpuid (rhbz#1697627) - cpu_x86: Rename virCPUx86CPUIDSorter (rhbz#1697627) - cpu_x86: Rename virCPUx86DataAddCPUIDInt (rhbz#1697627) - cpu_x86: Rename virCPUx86DataAddCPUID (rhbz#1697627) - cpu_x86: Rename virCPUx86VendorToCPUID (rhbz#1697627) - cpu_x86: Simplify x86DataAdd (rhbz#1697627) - cpu_x86: Introduce virCPUx86DataCmp (rhbz#1697627) - cpu_x86: Make x86cpuidSetBits more general (rhbz#1697627) - cpu_x86: Make x86cpuidClearBits more general (rhbz#1697627) - cpu_x86: Make x86cpuidAndBits more general (rhbz#1697627) - cpu_x86: Make x86cpuidMatchMasked more general (rhbz#1697627) - cpu_x86: Make x86cpuidMatch more general (rhbz#1697627) - cpu_x86: Store virCPUx86DataItem content in union (rhbz#1697627) - cpu_x86: Add support for storing MSR features in CPU map (rhbz#1697627) - cpu_x86: Move *CheckFeature functions (rhbz#1697627) - cputest: Add support for MSR features to cpu-parse.sh (rhbz#1697627) - util: file: introduce VIR_AUTOCLOSE macro to close fd of the file automatically (rhbz#1697627) - vircpuhost: Add support for reading MSRs (rhbz#1697627) - virhostcpu: Make virHostCPUGetMSR() work only on x86 (rhbz#1697627) - cpu_x86: Fix placement of *CheckFeature functions (rhbz#1697627) - cpu_conf: Introduce virCPUDefFilterFeatures (rhbz#1697627) - qemu_command: Use consistent syntax for CPU features (rhbz#1697627) - tests: Add QEMU caps data for future 4.1.0 (rhbz#1697627) - tests: Add domain capabilities case for QEMU 4.1.0 (rhbz#1697627) - qemuxml2argvtest: Add test for CPU features translation (rhbz#1697627) - qemu: Add APIs for translating CPU features (rhbz#1697627) - qemu: Probe for max-x86_64-cpu type (rhbz#1697627) - qemu: Probe for "unavailable-features" CPU property (rhbz#1697627) - qemu: Probe host CPU after capabilities (rhbz#1697627) - qemu_command: Use canonical names of CPU features (rhbz#1697627) - qemu: Translate feature names from query-cpu-model-expansion (rhbz#1697627) - qemu: Don't use full CPU model expansion (rhbz#1697627) - qemu: Make qemuMonitorGetGuestCPU usable on x86 only (rhbz#1697627) - cpu: Introduce virCPUDataAddFeature (rhbz#1697627) - qemu: Add type filter to qemuMonitorJSONParsePropsList (rhbz#1697627) - util: string: Introduce macro for automatic string lists (rhbz#1697627) - util: json: define cleanup function using VIR_DEFINE_AUTOPTR_FUNC (rhbz#1697627) - qemu: Introduce generic qemuMonitorGetGuestCPU (rhbz#1697627) - qemu_process: Prefer generic qemuMonitorGetGuestCPU (rhbz#1697627) - util: Rework virStringListAdd (rhbz#1697627) - conf: Introduce virCPUDefCheckFeatures (rhbz#1697627) - cpu_x86: Turn virCPUx86DataIteratorInit into a function (rhbz#1697627) - cpu_x86: Introduce virCPUx86FeatureFilter*MSR (rhbz#1697627) - cpu_x86: Read CPU features from IA32_ARCH_CAPABILITIES MSR (rhbz#1697627) - cpu_map: Introduce IA32_ARCH_CAPABILITIES MSR features (rhbz#1697627) - qemu: Forbid MSR features with old QEMU (rhbz#1697627) - qemu: Drop MSR features from host-model with old QEMU (rhbz#1697627) - cpu_x86: Fix memory leak - virCPUx86GetHost (rhbz#1697627) - qemu: Use @tmpChr in qemuDomainDetachChrDevice to build device string (rhbz#1624204) - qemu: Drop "user-" prefix for guestfwd netdev (rhbz#1624204) - qemu_hotplug: Attach guestfwd using netdev_add (rhbz#1624204) - qemu_hotplug: Detach guestfwd using netdev_del (rhbz#1624204) - qemuhotplugtest: Test guestfwd attach and detach (rhbz#1624204) - daemon: Register secret driver before storage driver (rhbz#1685151) - bhyve: Move autostarting of domains into bhyveStateInitialize (rhbz#1685151) - Revert "virStateDriver - Separate AutoStart from Initialize" (rhbz#1685151) - Revert "Separate out StateAutoStart from StateInitialize" (rhbz#1685151) - util: moving 'type' argument to avoid issues with mount() syscall. (rhbz#1689297) - util: cgroup: use VIR_AUTOFREE instead of VIR_FREE for scalar types (rhbz#1689297) - vircgroup: Rename structs to start with underscore (rhbz#1689297) - vircgroup: Introduce standard set of typedefs and use them (rhbz#1689297) - vircgroup: Extract file link resolving into separate function (rhbz#1689297) - vircgroup: Remove unused function virCgroupKill() (rhbz#1689297) - vircgroup: Unexport unused function virCgroupAddTaskController() (rhbz#1689297) - vircgroup: Unexport unused function virCgroupRemoveRecursively (rhbz#1689297) - vircgroup: Move function used in tests into vircgrouppriv.h (rhbz#1689297) - vircgroup: Remove pointless bool parameter (rhbz#1689297) - vircgroup: Extract mount options matching into function (rhbz#1689297) - vircgroup: Use virCgroupMountOptsMatchController in virCgroupDetectPlacement (rhbz#1689297) - vircgroup: Introduce virCgroupEnableMissingControllers (rhbz#1689297) - vircgroup: machinename will never be NULL (rhbz#1689297) - vircgroup: Remove virCgroupAddTaskController (rhbz#1689297) - vircgroup: Introduce virCgroupGetMemoryStat (rhbz#1689297) - lxc: Use virCgroupGetMemoryStat (rhbz#1689297) - vircgroup: fix MinGW build (rhbz#1689297) - vircgroup: Duplicate string before modifying (rhbz#1689297) - vircgroup: Extract controller detection into function (rhbz#1689297) - vircgroup: Extract placement validation into function (rhbz#1689297) - vircgroup: Split virCgroupPathOfController into two functions (rhbz#1689297) - vircgroup: Call virCgroupRemove inside virCgroupMakeGroup (rhbz#1689297) - vircgroup: Simplify if conditions in virCgroupMakeGroup (rhbz#1689297) - vircgroup: Remove obsolete sa_assert (rhbz#1689297) - tests: Resolve possible overrun (rhbz#1689297) - vircgroup: cleanup controllers not managed by systemd on error (rhbz#1689297) - vircgroup: fix bug in virCgroupEnableMissingControllers (rhbz#1689297) - vircgroup: rename virCgroupAdd.*Task to virCgroupAdd.*Process (rhbz#1689297) - vircgroup: introduce virCgroupTaskFlags (rhbz#1689297) - vircgroup: introduce virCgroupAddThread (rhbz#1689297) - vircgroupmock: cleanup unused cgroup files (rhbz#1689297) - vircgroupmock: rewrite cgroup fopen mocking (rhbz#1689297) - vircgrouptest: call virCgroupDetectMounts directly (rhbz#1689297) - vircgrouptest: call virCgroupNewSelf instead virCgroupDetectMounts (rhbz#1689297) - util: introduce vircgroupbackend files (rhbz#1689297) - vircgroup: introduce cgroup v1 backend files (rhbz#1689297) - vircgroup: extract virCgroupV1Available (rhbz#1689297) - vircgroup: detect available backend for cgroup (rhbz#1689297) - vircgroup: extract virCgroupV1ValidateMachineGroup (rhbz#1689297) - vircgroup: extract virCgroupV1CopyMounts (rhbz#1689297) - vircgroup: extract v1 detect functions (rhbz#1689297) - vircgroup: extract virCgroupV1CopyPlacement (rhbz#1689297) - vircgroup: extract virCgroupV1ValidatePlacement (rhbz#1689297) - vircgroup: extract virCgroupV1StealPlacement (rhbz#1689297) - vircgroup: extract virCgroupV1DetectControllers (rhbz#1689297) - vircgroup: extract virCgroupV1HasController (rhbz#1689297) - vircgroup: extract virCgroupV1GetAnyController (rhbz#1689297) - vircgroup: extract virCgroupV1PathOfController (rhbz#1689297) - vircgroup: extract virCgroupV1MakeGroup (rhbz#1689297) - vircgroup: extract virCgroupV1Remove (rhbz#1689297) - vircgroup: extract virCgroupV1AddTask (rhbz#1689297) - vircgroup: extract virCgroupV1HasEmptyTasks (rhbz#1689297) - vircgroup: extract virCgroupV1BindMount (rhbz#1689297) - vircgroup: extract virCgroupV1SetOwner (rhbz#1689297) - vircgroup: extract virCgroupV1(Set|Get)BlkioWeight (rhbz#1689297) - vircgroup: extract virCgroupV1GetBlkioIoServiced (rhbz#1689297) - vircgroup: extract virCgroupV1GetBlkioIoDeviceServiced (rhbz#1689297) - vircgroup: extract virCgroupV1(Set|Get)BlkioDeviceWeight (rhbz#1689297) - vircgroup: extract virCgroupV1(Set|Get)BlkioDeviceReadIops (rhbz#1689297) - vircgroup: extract virCgroupV1(Set|Get)BlkioDeviceWriteIops (rhbz#1689297) - vircgroup: extract virCgroupV1(Set|Get)BlkioDeviceReadBps (rhbz#1689297) - vircgroup: extract virCgroupV1(Set|Get)BlkioDeviceWriteBps (rhbz#1689297) - vircgroup: extract virCgroupV1SetMemory (rhbz#1689297) - vircgroup: extract virCgroupV1GetMemoryStat (rhbz#1689297) - vircgroup: extract virCgroupV1GetMemoryUsage (rhbz#1689297) - vircgroup: extract virCgroupV1(Set|Get)Memory*Limit (rhbz#1689297) - vircgroup: extract virCgroupV1GetMemSwapUsage (rhbz#1689297) - vircgroup: extract virCgroupV1(Allow|Deny)Device (rhbz#1689297) - vircgroup: extract virCgroupV1(Allow|Deny)AllDevices (rhbz#1689297) - vircgroup: extract virCgroupV1(Set|Get)CpuShares (rhbz#1689297) - vircgroup: extract virCgroupV1(Set|Get)CpuCfsPeriod (rhbz#1689297) - vircgroup: extract virCgroupV1(Set|Get)CpuCfsQuota (rhbz#1689297) - vircgroup: extract virCgroupV1SupportsCpuBW (rhbz#1689297) - vircgroup: extract virCgroupV1GetCpuacct*Usage (rhbz#1689297) - vircgroup: extract virCgroupV1GetCpuacctStat (rhbz#1689297) - vircgroup: extract virCgroupV1(Set|Get)FreezerState (rhbz#1689297) - vircgroup: extract virCgroupV1(Set|Get)CpusetMems (rhbz#1689297) - vircgroup: extract virCgroupV1(Set|Get)CpusetMemoryMigrate (rhbz#1689297) - vircgroup: extract virCgroupV1(Set|Get)CpusetCpus (rhbz#1689297) - vircgroup: rename virCgroupController into virCgroupV1Controller (rhbz#1689297) - vircgroup: rename controllers to legacy (rhbz#1689297) - vircgroup: remove VIR_CGROUP_SUPPORTED (rhbz#1689297) - vircgroup: include system headers only on linux (rhbz#1689297) - vircgroupv1: fix build on non-linux OSes (rhbz#1689297) - Revert "vircgroup: cleanup controllers not managed by systemd on error" (rhbz#1689297) - util: introduce cgroup v2 files (rhbz#1689297) - vircgroup: introduce virCgroupV2Available (rhbz#1689297) - vircgroup: introduce virCgroupV2ValidateMachineGroup (rhbz#1689297) - vircgroup: introduce virCgroupV2CopyMounts (rhbz#1689297) - vircgroup: introduce virCgroupV2CopyPlacement (rhbz#1689297) - vircgroup: introduce virCgroupV2DetectMounts (rhbz#1689297) - vircgroup: introduce virCgroupV2DetectPlacement (rhbz#1689297) - vircgroup: introduce virCgroupV2ValidatePlacement (rhbz#1689297) - vircgroup: introduce virCgroupV2StealPlacement (rhbz#1689297) - vircgroup: introduce virCgroupV2DetectControllers (rhbz#1689297) - vircgroup: introduce virCgroupV2HasController (rhbz#1689297) - vircgroup: introduce virCgroupV2GetAnyController (rhbz#1689297) - vircgroup: introduce virCgroupV2PathOfController (rhbz#1689297) - vircgroup: introduce virCgroupV2MakeGroup (rhbz#1689297) - vircgroup: introduce virCgroupV2Remove (rhbz#1689297) - vircgroup: introduce virCgroupV2AddTask (rhbz#1689297) - vircgroup: introduce virCgroupV2HasEmptyTasks (rhbz#1689297) - vircgroup: introduce virCgroupV2BindMount (rhbz#1689297) - vircgroup: introduce virCgroupV2SetOwner (rhbz#1689297) - vircgroup: introduce virCgroupV2(Set|Get)BlkioWeight (rhbz#1689297) - vircgroup: introduce virCgroupV2GetBlkioIoServiced (rhbz#1689297) - vircgroup: introduce virCgroupV2GetBlkioIoDeviceServiced (rhbz#1689297) - vircgroup: introduce virCgroupV2(Set|Get)BlkioDeviceWeight (rhbz#1689297) - vircgroup: introduce virCgroupV2(Set|Get)BlkioDeviceReadIops (rhbz#1689297) - vircgroup: introduce virCgroupV2(Set|Get)BlkioDeviceWriteIops (rhbz#1689297) - vircgroup: introduce virCgroupV2(Set|Get)BlkioDeviceReadBps (rhbz#1689297) - vircgroup: introduce virCgroupV2(Set|Get)BlkioDeviceWriteBps (rhbz#1689297) - vircgroup: introduce virCgroupV2SetMemory (rhbz#1689297) - vircgroup: introduce virCgroupV2GetMemoryStat (rhbz#1689297) - vircgroup: introduce virCgroupV2GetMemoryUsage (rhbz#1689297) - vircgroup: introduce virCgroupV2(Set|Get)MemoryHardLimit (rhbz#1689297) - vircgroup: introduce virCgroupV2(Set|Get)MemorySoftLimit (rhbz#1689297) - vircgroup: introduce virCgroupV2(Set|Get)MemSwapHardLimit (rhbz#1689297) - vircgroup: introduce virCgroupV2GetMemSwapUsage (rhbz#1689297) - vircgroup: introduce virCgroupV2(Set|Get)CpuShares (rhbz#1689297) - vircgroup: introduce virCgroupV2(Set|Get)CpuCfsPeriod (rhbz#1689297) - vircgroup: introduce virCgroupV2(Set|Get)CpuCfsQuota (rhbz#1689297) - vircgroup: introduce virCgroupV2SupportsCpuBW (rhbz#1689297) - vircgroup: introduce virCgroupV2GetCpuacctUsage (rhbz#1689297) - vircgroup: introduce virCgroupV2GetCpuacctStat (rhbz#1689297) - vircgroup: register cgroup v2 backend (rhbz#1689297) - vircgroup: add support for hybrid configuration (rhbz#1689297) - vircgroupmock: change cgroup prefix (rhbz#1689297) - vircgroupmock: add support to test cgroup v2 (rhbz#1689297) - vircgrouptest: introduce initFakeFS and cleanupFakeFS helpers (rhbz#1689297) - vircgrouptest: prepare testCgroupDetectMounts for cgroup v2 (rhbz#1689297) - vircgrouptest: add detect mounts test for cgroup v2 (rhbz#1689297) - vircgrouptest: add detect mounts test for hybrid cgroups (rhbz#1689297) - vircgrouptest: prepare validateCgroup for cgroupv2 (rhbz#1689297) - vircgrouptest: add cgroup v2 tests (rhbz#1689297) - vircgrouptest: add hybrid tests (rhbz#1689297) - virt-host-validate: rewrite cgroup detection to use util/vircgroup (rhbz#1689297) - virt-host-validate: require freezer for LXC (rhbz#1689297) - virt-host-validate: Fix build on non-Linux (rhbz#1689297) - tests: Use correct function name in error path (rhbz#1689297) - util: Fix virCgroupGetMemoryStat (rhbz#1689297) - tests: Augment vcgrouptest to add virCgroupGetMemoryStat (rhbz#1689297) - vircgroup: introduce virCgroupKillRecursiveCB (rhbz#1689297) - vircgroupv2: fix virCgroupV2ValidateMachineGroup (rhbz#1689297) - util: implement virCgroupV2(Set|Get)CpusetMems (rhbz#1689297) - util: implement virCgroupV2(Set|Get)CpusetMemoryMigrate (rhbz#1689297) - util: implement virCgroupV2(Set|Get)CpusetCpus (rhbz#1689297) - util: enable cgroups v2 cpuset controller for threads (rhbz#1689297) - util: vircgroup: pass parent cgroup into virCgroupDetectControllersCB (rhbz#1689297) - internal: introduce a family of NULLSTR macros (rhbz#1689297) - util: vircgroup: improve controller detection (rhbz#1689297) - util: vircgroupv2: use any controller to create thread directory (rhbz#1689297) - util: vircgroupv2: enable CPU controller only if it's available (rhbz#1689297) - util: vircgroupv2: separate return values of virCgroupV2EnableController (rhbz#1689297) - util: vircgroupv2: don't error out if enabling controller fails (rhbz#1689297) - util: vircgroupv2: mark only requested controllers as available (rhbz#1689297) - Revert "util: vircgroup: pass parent cgroup into virCgroupDetectControllersCB" (rhbz#1689297) - util: vircgroupv2: stop enabling missing controllers with systemd (rhbz#1689297) * Fri Jun 28 2019 Danilo de Paula - 4.5.0-28 - Rebuild all virt packages to fix RHEL's upgrade path - Resolves: rhbz#1695587 (Ensure modular RPM upgrade path) * Fri Jun 21 2019 Jiri Denemark - 4.5.0-27 - RHEL: spec: Disable gluster on i686 (rhbz#1722668) - rpc: virnetlibsshsession: update deprecated functions (rhbz#1722735) * Thu Jun 20 2019 Jiri Denemark - 4.5.0-26 - api: disallow virDomainSaveImageGetXMLDesc on read-only connections (CVE-2019-10161) - api: disallow virDomainManagedSaveDefineXML on read-only connections (CVE-2019-10166) - api: disallow virConnectGetDomainCapabilities on read-only connections (CVE-2019-10167) - api: disallow virConnect*HypervisorCPU on read-only connections (CVE-2019-10168) * Fri Jun 14 2019 Jiri Denemark - 4.5.0-25 - admin: reject clients unless their UID matches the current UID (CVE-2019-10132) - locking: restrict sockets to mode 0600 (CVE-2019-10132) - logging: restrict sockets to mode 0600 (CVE-2019-10132) - util: skip RDMA detection for non-PCI network devices (rhbz#1693299) - virfile: Detect ceph as shared FS (rhbz#1698133) - virfile: added GPFS as shared fs (rhbz#1698133) - util: bitmap: define cleanup function using VIR_DEFINE_AUTOPTR_FUNC (rhbz#1716943) - qemu: Rework setting process affinity (rhbz#1716943) - qemu: Set up EMULATOR thread and cpuset.mems before exec()-ing qemu (rhbz#1716943) - conf: Add definitions for 'uid' and 'fid' PCI address attributes (rhbz#1508149) - qemu: Introduce zPCI capability (rhbz#1508149) - qemu: Enable PCI multi bus for S390 guests (rhbz#1508149) - conf: Introduce extension flag and zPCI member for PCI address (rhbz#1508149) - conf: Introduce address caching for PCI extensions (rhbz#1508149) - qemu: Auto add pci-root for s390/s390x guests (rhbz#1508149) - conf: use virXMLFormatElement() in virDomainDeviceInfoFormat() (rhbz#1508149) - conf: Introduce parser, formatter for uid and fid (rhbz#1508149) - qemu: Add zPCI address definition check (rhbz#1508149) - conf: Allocate/release 'uid' and 'fid' in PCI address (rhbz#1508149) - qemu: Generate and use zPCI device in QEMU command line (rhbz#1508149) - qemu: Add hotpluging support for PCI devices on S390 guests (rhbz#1508149) - qemuDomainRemoveRNGDevice: Remove associated chardev too (rhbz#1508149) - qemu_hotplug: remove erroneous call to qemuDomainDetachExtensionDevice() (rhbz#1508149) - qemu_hotplug: remove another erroneous qemuDomainDetachExtensionDevice() call (rhbz#1508149) - util: Propagate numad failures correctly (rhbz#1716907) - util: Introduce virBitmapUnion() (rhbz#1716908) - util: Introduce virNumaNodesetToCPUset() (rhbz#1716908) - qemu: Fix qemuProcessInitCpuAffinity() (rhbz#1716908) - qemu: Fix leak in qemuProcessInitCpuAffinity() (rhbz#1716908) - qemu: Drop cleanup label from qemuProcessInitCpuAffinity() (rhbz#1716908) - qemu: Fix NULL pointer access in qemuProcessInitCpuAffinity() (rhbz#1716908) - qemuBuildMemoryBackendProps: Pass @priv instead of its individual members (rhbz#1624223) - qemu: Don't use -mem-prealloc among with .prealloc=yes (rhbz#1624223) - nwfilter: fix adding std MAC and IP values to filter binding (rhbz#1691356) - qemuProcessBuildDestroyMemoryPathsImpl: Don't overwrite error (rhbz#1658112) - qemu_security: Fully implement qemuSecurityDomainSetPathLabel (rhbz#1658112) - qemu: process: SEV: Assume libDir to be the directory to create files in (rhbz#1658112) - qemu: process: SEV: Relabel guest owner's SEV files created before start (rhbz#1658112) * Tue May 14 2019 Jiri Denemark - 4.5.0-24 - tests: qemuxml2argv: add CAPS_ARCH_LATEST macro (rhbz#1698855) - qemu: Add ccw support for vhost-vsock (rhbz#1698855) - qemu: Allow creating ppc64 guests with graphics and no USB mouse (rhbz#1683681) - conf: Expose virDomainSCSIDriveAddressIsUsed (rhbz#1692354) - qemuhotplugtest: Don't plug a SCSI disk at unit 7 (rhbz#1692354) - qemu_hotplug: Check for duplicate drive addresses (rhbz#1692354) - cpu_map: Add support for cldemote CPU feature (rhbz#1537731) - util: alloc: add macros for implementing automatic cleanup functionality (rhbz#1505998) - qemu: domain: Simplify non-VFIO memLockLimit calculation for PPC64 (rhbz#1505998) - qemu_domain: add a PPC64 memLockLimit helper (rhbz#1505998) - qemu_domain: NVLink2 bridge detection function for PPC64 (rhbz#1505998) - PPC64 support for NVIDIA V100 GPU with NVLink2 passthrough (rhbz#1505998) - cpu_x86: Do not cache microcode version (CVE-2018-12127, CVE-2019-11091, CVE-2018-12126, CVE-2018-12130) - qemu: Don't cache microcode version (CVE-2018-12127, CVE-2019-11091, CVE-2018-12126, CVE-2018-12130) - cputest: Add data for Intel(R) Xeon(R) CPU E3-1225 v5 (CVE-2018-12127, CVE-2019-11091, CVE-2018-12126, CVE-2018-12130) - cpu_map: Define md-clear CPUID bit (CVE-2018-12127, CVE-2019-11091, CVE-2018-12126, CVE-2018-12130) * Fri Feb 15 2019 Jiri Denemark - 4.5.0-23 - network: explicitly allow icmp/icmpv6 in libvirt zonefile (rhbz#1650320) * Fri Feb 15 2019 Jiri Denemark - 4.5.0-22 - util: fix memory leak in virFirewallDInterfaceSetZone() (rhbz#1650320) * Fri Feb 8 2019 Jiri Denemark - 4.5.0-21 - docs: Drop /dev/net/tun from the list of shared devices (rhbz#1665400) - qemu: conf: Remove /dev/sev from the default cgroup device acl list (rhbz#1665400) - qemu: cgroup: Expose /dev/sev/ only to domains that require SEV (rhbz#1665400) - qemu: domain: Add /dev/sev into the domain mount namespace selectively (rhbz#1665400) - security: dac: Relabel /dev/sev in the namespace (rhbz#1665400) - qemu: caps: Use CAP_DAC_OVERRIDE for probing to avoid permission issues (rhbz#1665400) - qemu: caps: Don't try to ask for CAP_DAC_OVERRIDE if non-root (rhbz#1665400) - Revert "RHEL: Require firewalld-filesystem for firewalld rpm macros" (rhbz#1650320) - Revert "RHEL: network: regain guest network connectivity after firewalld switch to nftables" (rhbz#1650320) - configure: change HAVE_FIREWALLD to WITH_FIREWALLD (rhbz#1650320) - util: move all firewalld-specific stuff into its own files (rhbz#1650320) - util: new virFirewallD APIs + docs (rhbz#1650320) - configure: selectively install a firewalld 'libvirt' zone (rhbz#1650320) - network: set firewalld zone of bridges to "libvirt" zone when appropriate (rhbz#1650320) - network: allow configuring firewalld zone for virtual network bridge device (rhbz#1650320) - util: remove test code accidentally committed to virFirewallDZoneExists (rhbz#1650320) - qemu: command: Don't skip 'readonly' and throttling info for empty drive (rhbz#1670337) * Mon Jan 28 2019 Jiri Denemark - 4.5.0-20 - RHEL: qemu: Fix crash trying to use iSCSI hostdev (rhbz#1669424) * Thu Jan 24 2019 Jiri Denemark - 4.5.0-19 - qemu: Fix logic error in qemuSetUnprivSGIO (rhbz#1666605) - tests: qemuxml2argv: Add test case for empty CDROM with cache mode (rhbz#1553255) - qemu: command: Don't format image properties for empty -drive (rhbz#1553255) * Mon Jan 14 2019 Jiri Denemark - 4.5.0-18 - conf: correct false boot order error during domain parse (rhbz#1630393) - qemu: Remove duplicated qemuAgentCheckError (rhbz#1665000) - qemu: require reply from guest agent in qemuAgentGetInterfaces (rhbz#1665000) - qemu: Filter non SCSI hostdevs in qemuHostdevPrepareSCSIDevices (rhbz#1665244) - util: remove const specifier from nlmsghdr arg to virNetlinkDumpCallback() (rhbz#1583131) - util: add a function to insert new interfaces to IPv6CheckForwarding list (rhbz#1583131) - util: use nlmsg_find_attr() instead of an open-coded loop (rhbz#1583131) - util: check accept_ra for all nexthop interfaces of multipath routes (rhbz#1583131) - util: make forgotten changes suggested during review of commit d40b820c (rhbz#1583131) * Mon Jan 7 2019 Jiri Denemark - 4.5.0-17 - virsh: Strip XML declaration when extracting CPU XMLs (rhbz#1659048) - RHEL: qemu: Add ability to set sgio values for hostdev (rhbz#1582424) - RHEL: qemu: Add check for unpriv sgio for SCSI generic host device (rhbz#1582424) - qemu: Alter @val usage in qemuSetUnprivSGIO (rhbz#1656362) - qemu: Alter qemuSetUnprivSGIO hostdev shareable logic (rhbz#1656362) * Mon Dec 17 2018 Jiri Denemark - 4.5.0-16 - util: Don't overflow in virRandomBits (rhbz#1655586) - virrandom: Avoid undefined behaviour in virRandomBits (rhbz#1655586) - spec: remove libcgroup and cgconfig (rhbz#1602407) - qemu: Drop duplicated code from qemuDomainDefValidateFeatures() (rhbz#1647822) - tests: Add capabilities data for QEMU 3.1.0 on ppc64 (rhbz#1647822) - qemu: Introduce QEMU_CAPS_MACHINE_PSERIES_CAP_NESTED_HV (rhbz#1647822) - conf: Parse and format nested-hv feature (rhbz#1647822) - qemu: Format nested-hv feature on the command line (rhbz#1647822) - qemu: Add check for whether KVM nesting is enabled (rhbz#1645139) - secret: Add check/validation for correct usage when LookupByUUID (rhbz#1656255) - cpu: Add support for "stibp" x86_64 feature (rhbz#1655032) * Mon Dec 3 2018 Jiri Denemark - 4.5.0-15 - virfile: Take symlink into account in virFileIsSharedFixFUSE (rhbz#1634782) - qemu: Ignore nwfilter binding instantiation issues during reconnect (rhbz#1648544) - qemu: Set identity for the reconnect all thread (rhbz#1648546) - Revert "access: Modify the VIR_ERR_ACCESS_DENIED to include driverName" (rhbz#1631608) - access: Modify the VIR_ERR_ACCESS_DENIED to include driverName (rhbz#1631608) - qemu: add vfio-ap capability (rhbz#1508146) - qemu: vfio-ap device support (rhbz#1508146) - qemu: Extract MDEV VFIO PCI validation code into a separate helper (rhbz#1508146) - conf: Move VFIO AP validation from post parse to QEMU validation code (rhbz#1508146) - qemu: Fix post-copy migration on the source (rhbz#1649169) * Fri Nov 9 2018 Jiri Denemark - 4.5.0-14 - storage: Remove secretPath from _virStorageBackendQemuImgInfo (rhbz#1645459) - storage: Allow for inputvol to have any format for encryption (rhbz#1645459) - storage: Allow inputvol to be encrypted (rhbz#1645459) - access: Modify the VIR_ERR_ACCESS_DENIED to include driverName (rhbz#1631608) - docs: Enhance polkit documentation to describe secondary connection (rhbz#1631608) - qemu: Don't ignore resume events (rhbz#1634758, rhbz#1643338) * Thu Nov 1 2018 Jiri Denemark - 4.5.0-13 - Revert "spec: Temporarily drop gluster support" (rhbz#1599339) * Wed Oct 17 2018 Jiri Denemark - 4.5.0-12 - RHEL: Require firewalld-filesystem for firewalld rpm macros (rhbz#1639932) * Tue Oct 16 2018 Jiri Denemark - 4.5.0-11 - virfile: fix cast-align error (rhbz#1634782) - virfiletest: Fix test name prefix for virFileInData test (rhbz#1634782) - virfiletst: Test virFileIsSharedFS (rhbz#1634782) - virFileIsSharedFSType: Detect direct mount points (rhbz#1634782) - virfile: Rework virFileIsSharedFixFUSE (rhbz#1634782) - RHEL: network: regain guest network connectivity after firewalld switch to nftables (rhbz#1638864) * Mon Oct 8 2018 Jiri Denemark - 4.5.0-10 - conf: Fix check for chardev source path (rhbz#1609723) - tests: Reuse qemucapabilities data for qemucaps2xml (rhbz#1629862) - tests: Add more tests to qemucaps2xml (rhbz#1629862) - qemu: Drop QEMU_CAPS_ENABLE_KVM (rhbz#1629862) - qemu: Avoid probing non-native binaries all the time (rhbz#1629862) - qemu: Clarify QEMU_CAPS_KVM (rhbz#1629862) - qemu: Don't check for /dev/kvm presence (rhbz#1629862) - tests: Follow up on qemucaps2xmldata rename (rhbz#1629862) - security: dac: also label listen UNIX sockets (rhbz#1634775) - spec: Set correct TLS priority (rhbz#1632269) - spec: Build ceph and gluster support everywhere (rhbz#1599546) - virsh: Require explicit --domain for domxml-to-native (rhbz#1634769) - virFileIsSharedFSType: Check for fuse.glusterfs too (rhbz#1634782) - qemu: fix up permissions for pre-created UNIX sockets (rhbz#1634775) - cpu_map: Add features for Icelake CPUs (rhbz#1527657, rhbz#1526625) - cpu_map: Add Icelake CPU models (rhbz#1526625) - qemu: Properly report VIR_DOMAIN_EVENT_RESUMED_FROM_SNAPSHOT (rhbz#1634758) - qemu: Report more appropriate running reasons (rhbz#1634758) - qemu: Pass running reason to RESUME event handler (rhbz#1634758) - qemu: Map running reason to resume event detail (rhbz#1634758) - qemu: Avoid duplicate resume events and state changes (rhbz#1634758) - conf: qemu: add support for Hyper-V frequency MSRs (rhbz#1589702) - conf: qemu: add support for Hyper-V reenlightenment notifications (rhbz#1589702) - conf: qemu: add support for Hyper-V PV TLB flush (rhbz#1589702) * Wed Sep 5 2018 Jiri Denemark - 4.5.0-9 - RHEL: Fix virConnectGetMaxVcpus output (rhbz#1582222) - storage: Add --shrink to qemu-img command when shrinking vol (rhbz#1622534) - access: Fix nwfilter-binding ACL access API name generation (rhbz#1622540) - conf: Add validation of input devices (rhbz#1591240) - tests: qemu: Remove disk from graphics-vnc-tls (rhbz#1598167) - tests: qemu: test more versions for graphics-vnc-tls (rhbz#1598167) - qemu: vnc: switch to tls-creds-x509 (rhbz#1598167) - qemu: mdev: Use vfio-pci 'display' property only with vfio-pci mdevs (rhbz#1624740) - virDomainDefCompatibleDevice: Relax alias change check (rhbz#1603133) - virDomainDetachDeviceFlags: Clarify update semantics (rhbz#1603133) - virDomainNetDefCheckABIStability: Check for MTU change too (rhbz#1623158) - RHEL: spec: Require python3-devel on RHEL-8 (rhbz#1518446) - qemu: monitor: Remove qemuMonitorJSONExtractCPUArchInfo wrapper (rhbz#1598829) - qemu: monitor: Use 'target' instead of 'arch' in reply of 'query-cpus-fast' (rhbz#1598829) * Tue Aug 21 2018 Jiri Denemark - 4.5.0-8 - tests: Add missing thread_siblings_list files (rhbz#1608479) - util: Rewrite virHostCPUCountThreadSiblings() (rhbz#1608479) - utils: Remove arbitrary limit on socket_id/core_id (rhbz#1608479) - tests: Add linux-high-ids test (rhbz#1608479) - qemu: hotplug: Fix asynchronous unplug of 'shmem' (rhbz#1618680) - tests: rename hugepages to hugepages-default (rhbz#1615461) - tests: extract hugepages-numa-default-dimm out of hugepages-numa (rhbz#1615461) - tests: rename hugepages-numa into hugepages-numa-default (rhbz#1615461) - tests: remove unnecessary XML elements from hugepages-numa-default (rhbz#1615461) - tests: extract pages-discard out of hugepages-pages (rhbz#1615461) - tests: rename hugepages-pages into hugepages-numa-nodeset (rhbz#1615461) - tests: rename hugepages-pages2 into hugepages-numa-default-2M (rhbz#1615461) - tests: extract pages-discard-hugepages out of hugepages-pages3 (rhbz#1615461) - tests: rename hugepages-pages3 into hugepages-numa-nodeset-part (rhbz#1615461) - tests: rename hugepages-pages4 into hugepages-numa-nodeset-nonexist (rhbz#1615461) - tests: rename hugepages-pages5 into hugepages-default-2M (rhbz#1615461) - tests: rename hugepages-pages6 into hugepages-default-system-size (rhbz#1615461) - tests: rename hugepages-pages7 into pages-dimm-discard (rhbz#1615461) - tests: rename hugepages-pages8 into hugepages-nodeset-nonexist (rhbz#1615461) - tests: introduce hugepages-default-1G-nodeset-2M (rhbz#1615461) - tests: introduce hugepages-nodeset (rhbz#1615461) - conf: Move hugepage XML validation check out of qemu_command (rhbz#1615461) - conf: Move hugepages validation out of XML parser (rhbz#1615461) - conf: Introduce virDomainDefPostParseMemtune (rhbz#1615461) - tests: sev: Test launch-security with specific QEMU version (rhbz#1619150) - qemu: Fix probing of AMD SEV support (rhbz#1619150) - qemu: caps: Format SEV platform data into qemuCaps cache (rhbz#1619150) - conf: Parse guestfwd channel device info again (rhbz#1610072) * Thu Aug 16 2018 Jiri Denemark - 4.5.0-7 - qemu_migration: Avoid writing to freed memory (rhbz#1615854) * Thu Aug 2 2018 Jiri Denemark - 4.5.0-6 - qemu: Exempt video model 'none' from getting a PCI address on Q35 - conf: Fix a error msg typo in virDomainVideoDefValidate * Tue Jul 31 2018 Jiri Denemark - 4.5.0-5 - esx storage: Fix typo lsilogic -> lsiLogic - networkGetDHCPLeases: Don't always report error if unable to read leases file - nwfilter: Resolve SEGV for NWFilter Snoop processing - qemu: Remove unused bypassSecurityDriver from qemuOpenFileAs - qemuDomainSaveMemory: Don't enforce dynamicOwnership - domain_nwfilter: Return early if net has no name in virDomainConfNWFilterTeardownImpl - examples: Add clean-traffic-gateway into nwfilters * Mon Jul 23 2018 Jiri Denemark - 4.5.0-4 - qemu: hotplug: don't overwrite error message in qemuDomainAttachNetDevice - qemu: hotplug: report error when changing rom enabled attr for net iface - qemu: Fix setting global_period cputune element - tests: qemucaps: Add test data for upcoming qemu 3.0.0 - qemu: capabilities: Add capability for werror/rerror for 'usb-device' frontend - qemu: command: Move graphics iteration to its own function - qemu: address: Handle all the video devices within a single loop - conf: Introduce virDomainVideoDefClear helper - conf: Introduce virDomainDefPostParseVideo helper - qemu: validate: Enforce compile time switch type checking for videos - tests: Add capabilities data for QEMU 2.11 x86_64 - tests: Update capabilities data for QEMU 3.0.0 x86_64 - qemu: qemuBuildHostdevCommandLine: Use a helper variable mdevsrc - qemu: caps: Introduce a capability for egl-headless - qemu: Introduce a new graphics display type 'headless' - qemu: caps: Add vfio-pci.display capability - conf: Introduce virDomainGraphicsDefHasOpenGL helper - conf: Replace 'error' with 'cleanup' in virDomainHostdevDefParseXMLSubsys - conf: Introduce new attribute 'display' - qemu: command: Enable formatting vfio-pci.display option onto cmdline - docs: Rephrase the mediated devices hostdev section a bit - conf: Introduce new video type 'none' - virt-xml-validate: Add schema for nwfilterbinding - tools: Fix typo generating adapter_wwpn field - src: Fix memory leak in virNWFilterBindingDispose * Mon Jul 23 2018 Jiri Denemark - 4.5.0-3 - qemu: hotplug: Do not try to add secret object for TLS if it does not exist - qemu: monitor: Make qemuMonitorAddObject more robust against programming errors - spec: Explicitly require matching libvirt-libs - virDomainConfNWFilterInstantiate: initialize @xml to avoid random crash - qemuProcessStartPRDaemonHook: Try to set NS iff domain was started with one - qemuDomainValidateStorageSource: Relax PR validation - virStoragePRDefFormat: Suppress path formatting for migratable XML - qemu: Wire up PR_MANAGER_STATUS_CHANGED event - qemu_monitor: Introduce qemuMonitorJSONGetPRManagerInfo - qemu: Fetch pr-helper process info on reconnect - qemu: Fix ATTRIBUTE_NONNULL for qemuMonitorAddObject - virsh.pod: Fix a command name typo in nwfilter-binding-undefine - docs: schema: Add missing to vsock device - virnetdevtap: Don't crash on !ifname in virNetDevTapInterfaceStats - tests: fix TLS handshake failure with TLS 1.3 * Mon Jul 9 2018 Jiri Denemark - 4.5.0-2 - qemu: Add capability for the HTM pSeries feature - conf: Parse and format the HTM pSeries feature - qemu: Format the HTM pSeries feature - qemu: hotplug: Don't access srcPriv when it's not allocated - qemuDomainNestedJobAllowed: Allow QEMU_JOB_NONE - src: Mention DEVICE_REMOVAL_FAILED event in virDomainDetachDeviceAlias docs - virsh.pod: Drop --persistent for detach-device-alias - qemu: don't use chardev FD passing with standalone args - qemu: remove chardevStdioLogd param from vhostuser code path - qemu: consolidate parameters of qemuBuildChrChardevStr into flags - qemu: don't use chardev FD passing for vhostuser backend - qemu: fix UNIX socket chardevs operating in client mode - qemuDomainDeviceDefValidateNetwork: Check for range only if IP prefix set - spec: Temporarily drop gluster support * Tue Jul 3 2018 Jiri Denemark - 4.5.0-1 - Rebased to libvirt-4.5.0 * Fri May 25 2018 Jiri Denemark - 4.3.0-1 - Rebased to libvirt-4.3.0 * Wed Mar 21 2018 Daniel P. Berrangé - 4.1.0-2 - Fix systemd macro argument with line continuations (rhbz#1558648) * Mon Mar 5 2018 Daniel Berrange - 4.1.0-1 - Rebase to version 4.1.0 * Wed Feb 07 2018 Fedora Release Engineering - 4.0.0-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_28_Mass_Rebuild * Fri Jan 19 2018 Daniel P. Berrange - 4.0.0-1 - Rebase to version 4.0.0 * Wed Dec 20 2017 Cole Robinson - 3.10.0-2 - Rebuild for xen 4.10 * Tue Dec 5 2017 Daniel P. Berrange - 3.10.0-1 - Rebase to version 3.10.0 * Fri Nov 3 2017 Daniel P. Berrange - 3.9.0-1 - Rebase to version 3.9.0 * Wed Oct 4 2017 Daniel P. Berrange - 3.8.0-1 - Rebase to version 3.8.0 * Mon Sep 4 2017 Daniel P. Berrange - 3.7.0-1 - Rebase to version 3.7.0 * Wed Aug 2 2017 Daniel P. Berrange - 3.6.0-1 - Rebase to version 3.6.0 * Sun Jul 30 2017 Florian Weimer - 3.5.0-4 - Rebuild with binutils fix for ppc64le (#1475636) * Tue Jul 25 2017 Daniel P. Berrange - 3.5.0-3 - Disabled RBD on i386, arm, ppc64 (rhbz #1474743) * Mon Jul 17 2017 Cole Robinson - 3.5.0-2 - Rebuild for xen 4.9 * Thu Jul 6 2017 Daniel P. Berrange - 3.5.0-1 - Rebase to version 3.5.0 * Fri Jun 2 2017 Daniel P. Berrange - 3.4.0-1 - Rebase to version 3.4.0 * Mon May 8 2017 Daniel P. Berrange - 3.3.0-1 - Rebase to version 3.3.0 * Mon Apr 3 2017 Daniel P. Berrange - 3.2.0-1 - Rebase to version 3.2.0 * Fri Mar 3 2017 Daniel P. Berrange - 3.1.0-1 - Rebase to version 3.1.0 * Fri Feb 10 2017 Fedora Release Engineering - 3.0.0-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_26_Mass_Rebuild * Thu Jan 19 2017 Daniel P. Berrange - 3.0.0-1 - Rebase to version 3.0.0