Compare commits

..

77 Commits
main ... f24

Author SHA1 Message Date
Adam Miller
a550d62548 add tar to address BZ#1409920
Signed-off-by: Adam Miller <maxamillion@fedoraproject.org>
2017-01-04 15:36:56 -06:00
Jan Pazdziora
7afda9537f 1343136 - the default OOMScoreAdjust=-900 does not cause any ill effects on fedora.
(cherry picked from commit 1a5dea70fc)
2016-09-20 18:20:28 +02:00
Jason Brooks
7e4f164444 correct ostree repo location
see: https://pagure.io/fedora-kickstarts/pull-request/38#comment-8056
2016-08-13 13:25:32 -05:00
Bruno Wolff III
1cdbd3ef07 Make sure chronyd runs with the correct config
We need to have chronyd start after livesys has finished so that
the config for chronyd gets rewritten before it starts. If not it
will overwrite the system clock with a time that will be incorrect
(US eastern stored as local time instead of UTC) for most people.
This fixes bug 1018162.
2016-08-04 07:43:46 -05:00
Jason Brooks
e640139976 fix ostree repo location
problem: fedora atomic host images are including an old
ostree tree (24.39 from 2016-06-15 09:57:04)

cause: The ostree repo specified in this file at:
https://kojipkgs.fedoraproject.org/compose/atomic/24/
was last updated at 2016-06-15 09:57:04.

Fedora Atomic 23 used the location:
https://kojipkgs.fedoraproject.org/mash/atomic/23/.

The ref at the similar
https://kojipkgs.fedoraproject.org/mash/atomic/24/
was last modifed 2016-07-24. This seems to be the correct
location. Or, if the switch from mash to compose is right,
then we need to ensure that the compose location is updated
/ kept up to date.
2016-07-27 10:36:46 -07:00
Adam Miller
fb34ac6186 fix missing /run/lock in docker base image BZ#1343138
Signed-off-by: Adam Miller <maxamillion@fedoraproject.org>
2016-07-22 16:04:40 -05:00
Dan Book
03020f4a74 Cinnamon - correct gnome metadata for extra backgrounds and add basic backgrounds 2016-06-07 21:03:21 -04:00
Kevin Fenzi
cd2ff0eea2 Drop dracut-config-generic since we don't want the larger generic initramfses on all installed from live instances.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
2016-06-03 12:09:10 -07:00
Kalev Lember
ee9e070d75 packagekit-cached-metadata.ks: Adapt for livemedia-creator changes
Now that F24 images are made with livemedia-creator instead of
livecd-creator, the kickstart parser has changed; the new kickstart
parser doesn't understand the $INSTALL_ROOT variable we'd been using in
%post --nochroot scripts. This commit fixes this by replacing
$INSTALL_ROOT usage with hardcoded /mnt/sysimage as docs suggest.

While at this, this commit also fixes a case where resolv.conf would be
incorrectly copied if it is a symlink, thanks to dgilmore for pointing
this out.
2016-06-01 23:20:46 +02:00
Dennis Gilmore
a769fe0a58 install new arm-tools group to pull in tools for booting arm systems.
Signed-off-by: Dennis Gilmore <dennis@ausil.us>
2016-05-30 10:10:29 -05:00
Christian Dersch
dbf41eb0b0 astronomy: remove astronomy-bookmarks (outdated and affected by #1338010) 2016-05-27 09:57:53 +02:00
Dennis Gilmore
f086a341da add a default url line to the livecd kickstarts
Signed-off-by: Dennis Gilmore <dennis@ausil.us>
2016-05-23 09:36:29 -05:00
Christian Dersch
9714319110 astronomy: added plasma applet for redshift 2016-05-21 15:11:26 +02:00
Dusty Mabe
df302e6748
fedora-cloud-base: Add which package back.
After removing grub2 the which package gets removed. Let's add it back
because it is generally useful and because it is needed for many vagrant
utilities to work.
2016-05-20 10:53:04 -04:00
Peter Robinson
558f5c6315 arm: add fedora-arm-installer 2016-05-17 13:51:48 +01:00
Peter Robinson
f0fdf7c568 cloud: ppc: add grub2 explicitly since now primary has explicitly removed it again 2016-05-17 12:04:21 +01:00
Christian Dersch
302f5ad386 astronomy: removed skychart, do not ship two complete Python stacks => removed python 2 scientific stuff 2016-05-16 14:09:42 +02:00
Dan Book
e891c467f0 remove unneeded keyring package; add yumex-dnf and extra backgrounds
- gnome-keyring-pam is already required by cinnamon
2016-05-13 22:05:23 -05:00
Peter Robinson
6105897461 aarch64: fix cloud ks 2016-05-13 17:57:18 +01:00
raveit65
d003cb2a7d Mate: add p7zip 2016-05-13 11:01:12 +02:00
Peter Robinson
f8593bceab arm: minimal: add WiFi cli support 2016-05-12 16:33:02 +01:00
Peter Robinson
6eab7f1b6a cloud: aarch64: fix console line 2016-05-12 08:47:30 +01:00
Peter Robinson
2264e6daa9 aarch64: cloud: explicitly add uEFI boot components 2016-05-10 16:36:34 +01:00
Christian Dersch
24e3e25f16 astronomy: added virtualplanet and redshift 2016-05-10 14:16:13 +02:00
raveit65
a4495045d0 Mate: use f24-backgrounds-extras-base 2016-05-10 11:10:52 +02:00
Luya Tshimbalanga
17bed3db91 design-suite: really enable gthumb 2016-05-04 19:39:43 -07:00
Adam Williamson
f4ee7648ad Revert "cloud-base-vagrant: Add sshfs to support vagrant-sshfs plugin"
This reverts commit 34a505db5c.
The package is not in the Cloud install root at present so this
change made the image compose fail. This can be re-applied if
the package is added to an appropriate comps group.
2016-05-03 22:54:53 -07:00
Dusty Mabe
3992f9ca91 cloud-base-vagrant: use extlinux to match cloud-base
If we don't do this it will try to use grub2 but will fail
because we removed the packages from the package set.
2016-05-03 17:36:30 -05:00
Dusty Mabe
34a505db5c cloud-base-vagrant: Add sshfs to support vagrant-sshfs plugin
Adding sshfs into the image will make it so that users won't have
to wait for the package to be installed on bringup.
2016-05-03 17:35:16 -05:00
Luya Tshimbalanga
dc22ec46cb design-suite: bring back f24-backgrounds-extras 2016-05-03 14:56:27 -07:00
Luya Tshimbalanga
dec45f8d97 design-suite: remove erronous typo 2016-05-03 10:25:03 -07:00
Kalev Lember
80d15bf8ba packagekit-cached-metadata.ks: Update Branched and Rawhide repo URLs
They changed with the switch to Pungi.
2016-05-03 15:16:50 +02:00
Luya Tshimbalanga
1ef06b2533 design-suite: temporary disable f24-backgrounds-extras for testing purpose 2016-05-02 11:16:30 -07:00
Bruno Wolff III
71fb82b5bc Games: I still need to get the i686 size down another 100 MB
Hopefully eventually Midori will get fixed, so firefox can be dropped
and we'll find a way to get the i686 version not to be 400 MB larger
than the x86_64 version.
2016-04-29 13:54:04 -05:00
Kevin Fenzi
11a93ac029 Add admin-tools group in. Fixes bug #1330298 2016-04-26 15:06:58 -06:00
Luya Tshimbalanga
4407d70045 Merge branch 'f24' of ssh://git.fedorahosted.org/git/spin-kickstarts into f24 2016-04-26 12:36:48 -07:00
Luya Tshimbalanga
ab8bfa2903 design-suite: add f24-backgrounds extras and switch geeqie to gthumb 2016-04-26 12:34:01 -07:00
Bruno Wolff III
37bbc185a5 Games also cut Ri-li for size 2016-04-25 00:19:04 -05:00
Bruno Wolff III
125b994038 Games: don't block firefox
With no sign of midori getting fixed, let firefox get used for beta.
The kernel / change to livemedia had more to do with the size problem,
than firefox did. With the removal of freedroid and letting firefox
go the size should be very close.
2016-04-24 23:54:51 -05:00
Bruno Wolff III
d9a3ca9946 Games: need to save 20MB on i686
With livemedia putting both PAE and non-PAE kernels on i686,
i686 images are a lot bigger than x86_64 images and what i686
used to be. Removing freedroid looks to be enough.
2016-04-24 23:51:57 -05:00
Luya Tshimbalanga
1016065d6b design-suite: add geeqie 2016-04-21 01:40:52 -07:00
Kushal Das
8c2a31f378 Pulls in the systemd-udev subpackage 2016-04-13 15:25:52 +05:30
Dennis Gilmore
e1206f4b9b update the atomic cloud images for f24
Signed-off-by: Dennis Gilmore <dennis@ausil.us>
2016-04-12 10:07:32 -05:00
Peter Robinson
7f13b20e33 Docker: Base: add arm config, use includes for ppc config 2016-04-12 15:44:02 +01:00
Peter Robinson
6226c24d43 Cloud: Base: add arm config, use includes for ppc config 2016-04-12 14:22:27 +01:00
Peter Robinson
b4d8fed0e8 SoaS: we don't want the WebKit gtk2 plugin support 2016-04-10 22:41:43 +01:00
raveit65
de041f9852 update fedora-mate-packages.ks 2016-04-09 17:12:51 +02:00
Peter Robinson
7b9bef18d0 SoaS: Don't include livecd-tools anymore 2016-03-30 14:57:07 +01:00
Kevin Fenzi
802b718d0d Allow dracut-config-rescue to be installed so installed systems have a
rescue kernel. Also remove the rescue kernel and initramfs on the live
itself. Fixes bug #1317709
2016-03-25 12:37:29 -06:00
Christian Dersch
c4326802f6 astronomy: increased space 2016-03-24 20:53:12 +01:00
Peter Robinson
fb5d41231c ppc: we need grub2 in cloud images 2016-03-24 17:25:05 +00:00
Peter Robinson
3d38aa7715 add PPC specific cloud kickstarts until anaconda rhbz 1303219 is fixed 2016-03-24 16:41:13 +00:00
Luya Tshimbalanga
5b062b29c6 desing-suite: increase recommended size 2016-03-23 23:37:01 -07:00
Dennis Gilmore
55890d6209 make the arm KDE image 6.5G, needs more space
Signed-off-by: Dennis Gilmore <dennis@ausil.us>
2016-03-14 20:34:33 -05:00
Dennis Gilmore
533fa0ccda point at f24 repo
Signed-off-by: Dennis Gilmore <dennis@ausil.us>
2016-03-13 21:17:56 -05:00
Christian Dersch
c53c695e25 astronomy: added veusz to have a proper replacement for scidavis 2016-03-13 20:29:05 +01:00
Adam Williamson
23af1c94df Revert "Revert "add @gnome-desktop to fedora-workstation-packages""
This reverts commit a08e27a87d.
Requested by Michael Catanzaro, he is re-applying the Workstation
comps group change that was reverted.
2016-03-12 10:27:35 -08:00
Bruno Wolff III
3ddd549ff7 Games: Don't pull in firefox to keep size down 2016-03-12 10:30:57 -06:00
Christian Dersch
92cbaff664 astronomy: removed broken xvarstar 2016-03-12 13:07:27 +01:00
raveit65
ef88d6ddbd Mate: clean up fedora-mate-packages.ks 2016-03-12 00:30:02 +01:00
Kevin Fenzi
8c971991de Switch default browser to firefox on Xfce 2016-03-10 13:18:53 -07:00
Rex Dieter
103d925e9b kde-desktop: +qupzilla, use @firefox group 2016-03-08 07:08:14 -06:00
Peter Robinson
410101bd76 Nuke random seed in install for ARM images too, the new instance should make it's own. Fixes bug #1314879 2016-03-07 08:42:51 -06:00
Dennis Gilmore
179a268857 Revert "Merge branch 'master' into f24"
This reverts commit eead7177ab, reversing
changes made to b9fcda35df.
2016-03-07 08:40:39 -06:00
Christian Dersch
ccc8847b19 astronomy: kst fixed, added again 2016-03-06 13:57:45 +01:00
Peter Robinson
eead7177ab Merge branch 'master' into f24 2016-03-05 17:44:39 +00:00
Kevin Fenzi
b9fcda35df Nuke random seed in install, the new instance should make it's own. Fixes bug #1314879 2016-03-05 09:27:39 -07:00
Kalev Lember
f4e8f1bb0a Revert "add @gnome-desktop to fedora-workstation-packages"
@gnome-desktop addition was reverted in comps in commit
db13483cc5bdb39b8d9f066e7706335fb9ae3048; this reverts it here too.

This reverts commit 6b42371f72.
2016-03-04 12:55:12 +01:00
Christian Dersch
9199268aed astronomy: added LabPlot as replacement for retired scidavis 2016-03-03 17:54:58 +01:00
Dennis Gilmore
26768920ec fedira install trees are now defined in pungi-fedora
Signed-off-by: Dennis Gilmore <dennis@ausil.us>
2016-03-02 11:16:55 -06:00
Christian Dersch
c254d4e73e astronomy: disabled kst until dependency issue with gsl 2.1 is fixed 2016-03-02 01:32:13 +01:00
Dennis Gilmore
17862cd969 increate the size of some of teh arm images. the install was too big
Signed-off-by: Dennis Gilmore <dennis@ausil.us>
2016-02-29 21:00:21 -06:00
Dennis Gilmore
454fed4a4c install only english support on the minimal arm image
Signed-off-by: Dennis Gilmore <dennis@ausil.us>
2016-02-29 20:49:57 -06:00
Dennis Gilmore
6da9e16e53 make sure we do not include the rawhide repo
Signed-off-by: Dennis Gilmore <dennis@ausil.us>
2016-02-29 14:31:30 -06:00
Dennis Gilmore
e8de8a9ce3 make sure that all the livecds and arm images have glibc-all-langpacks installed
Signed-off-by: Dennis Gilmore <dennis@ausil.us>
2016-02-29 14:21:30 -06:00
Dennis Gilmore
5d3551ec4c remove file that does not belong in the repo
Signed-off-by: Dennis Gilmore <dennis@ausil.us>
2016-02-25 17:14:02 -06:00
Dennis Gilmore
777c11480e make the arm base / 3070 LXDE was too big and this keeps the image under 4GiB
Signed-off-by: Dennis Gilmore <dennis@ausil.us>
2016-02-25 16:29:47 -06:00
144 changed files with 2995 additions and 2871 deletions

23
README Normal file
View File

@ -0,0 +1,23 @@
The master branch is where development takes place:
- it may contain kickstart files that are broken, or
- spin concepts that are in the process of being
approved by the Board (trademark approval), or
- spin concepts that are in the process of being
approved by the Spins SIG
The release specific branches contain spin concepts that:
- are approved (both by Board and Spin SIG)
- maintained for the remainder of the release cycle
git clone ssh://git.fedorahosted.org/git/spin-kickstarts.git spin-kickstarts
cd spin-kickstarts
# If you need a specific branch other than master:
git checkout BRANCHNAME
# No tag has been added yet tag HEAD with
git tag VERSION
git push --tags
make
# Publish the released tar ball
make publish
# Clean up the generated files:
make clean

View File

@ -1,45 +0,0 @@
# fedora-kickstarts #
This project is used to manage the Fedora kickstart files used in composing Fedora release images.
The master branch is used by rawhide and each release branch is used by that release.
All changes should be made via the PR workflow.
This project is packaged in Fedora as the spin-kickstarts package allowing users to see
and modify the kickstart files for their local needs.
Maintainers for each image are listed in the `maintainers.toml` file.
## To make a release ##
git clone ssh://git@pagure.io/fedora-kickstarts.git fedora-kickstarts
cd fedora-kickstarts
# If you need a specific branch other than master:
git checkout BRANCHNAME
# No tag has been added yet tag HEAD with
git tag VERSION
git push --tags
make
# Publish the released tar ball
make publish
# Clean up the generated files:
make clean
## Build logs ##
To see build logs go to
https://koji.fedoraproject.org/koji
"Packages" tab, and filter by Fedora-Workstation-Live for example.
Technical info about the officialy released images can be found at
https://kojipkgs.fedoraproject.org/compose/
# bug reports #
Bugs should be reported to the spin-kickstarts bugzilla component:
https://bugzilla.redhat.com/enter_bug.cgi?product=Fedora&component=spin-kickstarts

View File

@ -0,0 +1,8 @@
## Lorax template to configure Anaconda to use the local OSTree
## repository on disk.
<%page args="ostree_osname, ostree_ref"/>
append usr/share/anaconda/interactive-defaults.ks "ostreesetup --nogpg --osname=${ostree_osname} --remote=${ostree_osname} --url=file:////run/install/repo/content/repo --ref=${ostree_ref}\n"
append usr/share/anaconda/interactive-defaults.ks "services --disabled cloud-init,cloud-config,cloud-final,cloud-init-local\n"
append usr/share/anaconda/interactive-defaults.ks "%post --erroronfail\nrm -f /etc/ostree/remotes.d/${ostree_osname}.conf\nostree remote add --set=gpg-verify=false fedora-atomic 'https://dl.fedoraproject.org/pub/fedora/linux/atomic/24/'\n%end\n"

View File

@ -0,0 +1,11 @@
## Lorax template to embed an OSTree repository into the installer.iso
## and configure an interactive installer use to look for it.
##
## Note that we pull with depth=0 to only get *one* commit into the
## ISO, because we obviously don't want the full history.
<%page args="workdir, ostree_osname, ostree_repo, ostree_ref"/>
runcmd mkdir -p ${workdir}/iso-graft/content/repo
runcmd ostree --repo=${workdir}/iso-graft/content/repo init --mode=archive-z2
runcmd ostree --repo=${workdir}/iso-graft/content/repo remote add ostree-mirror --set=gpg-verify=false ${ostree_repo}
runcmd ostree --repo=${workdir}/iso-graft/content/repo pull --mirror ostree-mirror ${ostree_ref}

View File

@ -111,7 +111,7 @@ firefox
# "EOF" is quoted so that variables are not expanded. Search for "here-document"
# in man bash.
cat >> /var/lib/livesys/livesys-session-extra << "EOF"
cat >> /etc/rc.d/init.d/livesys << "EOF"
# Create Test Day welcome screen
# Note that shebang must be written this way, else it is considered as comment

99
fedora-aos.ks Normal file
View File

@ -0,0 +1,99 @@
# Kickstart file to build the appliance operating
# system for fedora.
# This is based on the work at http://www.thincrust.net
lang C
keyboard us
timezone US/Eastern
auth --useshadow --passalgo=sha512
selinux --permissive
firewall --disabled
bootloader --timeout=1 --append="acpi=force"
network --bootproto=dhcp --device=eth0 --onboot=on
services --enabled=network
# Uncomment the next line
# to make the root password be thincrust
# By default the root password is emptied
#rootpw --iscrypted $1$uw6MV$m6VtUWPed4SqgoW6fKfTZ/
#
# Partition Information. Change this as necessary
# This information is used by appliance-tools but
# not by the livecd tools.
#
part / --size 1024 --fstype ext4 --ondisk sda
#
# Repositories
#
%include fedora-repo.ks
#
# Add all the packages after the base packages
#
%packages --excludedocs --nobase
bash
kernel
grub
e2fsprogs
passwd
policycoreutils
chkconfig
rootfiles
yum
vim-minimal
acpid
#needed to disable selinux
lokkit
#Allow for dhcp access
dhclient
iputils
#
# Packages to Remove
#
# no need for kudzu if the hardware doesn't change
-kudzu
-prelink
-setserial
-ed
# Remove the authconfig pieces
-authconfig
-rhpl
-wireless-tools
# Remove the kbd bits
-kbd
-usermode
# these are all kind of overkill but get pulled in by mkinitrd ordering
-mkinitrd
-kpartx
-dmraid
-mdadm
-lvm2
-tar
# selinux toolchain of policycoreutils, libsemanage, ustr
-policycoreutils
-checkpolicy
-selinux-policy*
-libselinux-python
-libselinux
# Things it would be nice to loose
-fedora-logos
generic-logos
-fedora-release-notes
%end
#
# Add custom post scripts after the base post.
#
%post
%end

70
fedora-arm-base.ks Normal file
View File

@ -0,0 +1,70 @@
lang en_US.UTF-8
#keyboard us
auth --useshadow --passalgo=sha512
selinux --enforcing
firewall --enabled --service=mdns,ssh
# configure extlinux bootloader
bootloader extlinux
part /boot --size=512 --fstype ext4
part swap --size=512 --fstype swap
part / --size=3584 --fstype ext4
# make sure that initial-setup runs and lets us do all the configuration bits
firstboot --reconfig
services --enabled=ssh,NetworkManager,avahi-daemon,rsyslog,chronyd,initial-setup --disabled=network
%include fedora-repo.ks
%packages
@core
@standard
@hardware-support
@dial-up
kernel
dracut-config-generic
# install tools needed to manage and boot arm systems
@arm-tools
chrony
extlinux-bootloader
initial-setup
initial-setup-gui
#lets resize / on first boot
# dracut-modules-growroot
# remove this in %post
dracut-config-generic
# make sure all the locales are available for inital0-setup and anaconda to work
glibc-all-langpacks
%end
%post
# work around for poor key import UI in PackageKit
rm -f /var/lib/rpm/__db*
releasever=$(rpm -q --qf '%{version}\n' fedora-release)
basearch=armhfp
rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-$releasever-$basearch
echo "Packages within this ARM disk image"
rpm -qa
# Note that running rpm recreates the rpm db files which aren't needed or wanted
rm -f /var/lib/rpm/__db*
# remove random seed, the newly installed instance should make it's own
rm -f /var/lib/systemd/random-seed
# Because memory is scarce resource in most arm systems we are differing from the Fedora
# default of having /tmp on tmpfs.
echo "Disabling tmpfs for /tmp."
systemctl mask tmp.mount
dnf -y remove dracut-config-generic
%end

12
fedora-arm-kde.ks Normal file
View File

@ -0,0 +1,12 @@
%include fedora-arm-base.ks
%include fedora-arm-xbase.ks
%include fedora-kde-packages.ks
part / --size=5632 --fstype ext4
%post
echo -n "Enabling initial-setup gui mode on startup"
ln -s /usr/lib/systemd/system/initial-setup-graphical.service /etc/systemd/system/graphical.target.wants/initial-setup-graphical.service
echo .
%end

10
fedora-arm-lxde.ks Normal file
View File

@ -0,0 +1,10 @@
%include fedora-arm-base.ks
%include fedora-arm-xbase.ks
%include fedora-lxde-packages.ks
%post
echo -n "Enabling initial-setup gui mode on startup"
ln -s /usr/lib/systemd/system/initial-setup-graphical.service /etc/systemd/system/graphical.target.wants/initial-setup-graphical.service
echo .
%end

12
fedora-arm-mate.ks Normal file
View File

@ -0,0 +1,12 @@
%include fedora-arm-base.ks
%include fedora-arm-xbase.ks
%include fedora-mate-packages.ks
part / --size=5500 --fstype ext4
%post
echo -n "Enabling initial-setup gui mode on startup"
ln -s /usr/lib/systemd/system/initial-setup-graphical.service /etc/systemd/system/graphical.target.wants/initial-setup-graphical.service
echo .
%end

View File

@ -1,13 +1,15 @@
%include fedora-arm-base.ks
part /boot --size=512 --fstype ext4
part swap --size=256 --fstype swap
part / --size=1279 --fstype ext4
%packages
microdnf
-@standard
-@dial-up
-initial-setup-gui
-generic-release*
-glibc-all-langpacks
# recommended by iproute, we don't want it in minimal
-iproute-tc
# recommended by gnutls, we don't want it in minimal
-trousers
glibc-langpack-en
iw
NetworkManager-wifi
@ -22,3 +24,4 @@ ln -s /lib/systemd/system/multi-user.target /etc/systemd/system/default.target
echo .
%end

View File

@ -1,23 +1,16 @@
%include fedora-disk-base.ks
%include fedora-arm-base.ks
services --enabled=sshd,NetworkManager,chronyd,initial-setup
autopart --noswap
# server defaults to xfs for / so lets do so on arm also
part / --size=3000 --fstype xfs
%packages
fedora-release-server
# install the default groups for the server environment since installing the environment is not working
-@dial-up
# install the default groups for the server evironment since installing the environment is not working
@server-product
@standard
@core
@headless-management
@hardware-support
@networkmanager-submodules
@container-management
@domain-client
@guest-agents
@server-hardware-support
-initial-setup-gui
-generic-release*
%end

10
fedora-arm-soas.ks Normal file
View File

@ -0,0 +1,10 @@
%include fedora-arm-base.ks
%include fedora-arm-xbase.ks
%include fedora-soas-packages.ks
%post
echo -n "Enabling initial-setup gui mode on startup"
ln -s /usr/lib/systemd/system/initial-setup-graphical.service /etc/systemd/system/graphical.target.wants/initial-setup-graphical.service
echo .
%end

12
fedora-arm-workstation.ks Normal file
View File

@ -0,0 +1,12 @@
%include fedora-arm-base.ks
%include fedora-arm-xbase.ks
%include fedora-workstation-packages.ks
part / --size=5500 --fstype ext4
%packages
-initial-setup
-initial-setup-gui
%end

8
fedora-arm-xbase.ks Normal file
View File

@ -0,0 +1,8 @@
%packages
@base-x
@fonts
@input-methods
@multimedia
@printing
%end

12
fedora-arm-xfce.ks Normal file
View File

@ -0,0 +1,12 @@
%include fedora-arm-base.ks
%include fedora-arm-xbase.ks
%include fedora-xfce-packages.ks
part / --size=4000 --fstype ext4
%post
echo -n "Enabling initial-setup gui mode on startup"
ln -s /usr/lib/systemd/system/initial-setup-graphical.service /etc/systemd/system/graphical.target.wants/initial-setup-graphical.service
echo .
%end

36
fedora-atomic-vagrant.ks Normal file
View File

@ -0,0 +1,36 @@
# Like the Atomic cloud image, but tuned for vagrant. Enable
# the vagrant user, disable cloud-init.
%include fedora-atomic.ks
services --disabled=cloud-init,cloud-init-local,cloud-config,cloud-final
user --name=vagrant --password=vagrant
rootpw vagrant
# The addition of the net.ifnames=0 and biosdevnames=0 option ensures that
# even on VirtualBox virt, we get a primary network device with "eth0" as the name
# This simplifies things and allows a single disk image for both supported Vagrant
# platforms (virtualbox and kvm)
bootloader --timeout=1 --append="no_timer_check console=tty1 console=ttyS0,115200n8 net.ifnames=0 biosdevname=0"
%post --erroronfail
# Work around cloud-init being both disabled and enabled; need
# to refactor to a common base.
systemctl mask cloud-init cloud-init-local cloud-config cloud-final
# Vagrant setup
sed -i 's,Defaults\\s*requiretty,Defaults !requiretty,' /etc/sudoers
echo 'vagrant ALL=NOPASSWD: ALL' > /etc/sudoers.d/vagrant-nopasswd
sed -i 's/.*UseDNS.*/UseDNS no/' /etc/ssh/sshd_config
mkdir -m 0700 -p ~vagrant/.ssh
cat > ~vagrant/.ssh/authorized_keys << EOKEYS
ssh-rsa AAAAB3NzaC1yc2EAAAABIwAAAQEA6NF8iallvQVp22WDkTkyrtvp9eWW6A8YVr+kz4TjGYe7gHzIw+niNltGEFHzD8+v1I2YJ6oXevct1YeS0o9HZyN1Q9qgCgzUFtdOKLv6IedplqoPkcmF0aYet2PkEDo3MlTBckFXPITAMzF8dJSIFo9D8HfdOV0IAdx4O7PtixWKn5y2hMNG0zQPyUecp4pzC6kivAIhyfHilFR61RGL+GPXQ2MWZWFYbAGjyiYJnAmCP3NOTd0jMZEnDkbUvxhMmBYSdETk1rRgm+R4LOzFUGaHqHDLKLX+FIPKcF96hrucXzcWyLbIbEgE98OHlnVYCzRdK8jlqm8tehUc9c9WhQ== vagrant insecure public key
EOKEYS
chmod 600 ~vagrant/.ssh/authorized_keys
chown -R vagrant:vagrant ~vagrant/.ssh/
%end

129
fedora-atomic.ks Normal file
View File

@ -0,0 +1,129 @@
# Fedora Atomic is a cloud-focused spin implementing the Project
# Atomic patterns. Note that this replicates the same tree which can
# now be installed on bare metal.
# This image allocates most space to an LVM-managed thin pool
# dedicated for Docker containers, and uses docker-storage-setup to
# dynamically resize storage on boot.
text
lang en_US.UTF-8
keyboard us
timezone --utc Etc/UTC
auth --useshadow --passalgo=sha512
selinux --enforcing
rootpw --lock --iscrypted locked
user --name=none
firewall --disabled
bootloader --timeout=1 --append="no_timer_check console=tty1 console=ttyS0,115200n8"
network --bootproto=dhcp --device=link --activate --onboot=on
services --disabled=network
services --enabled=sshd,rsyslog,cloud-init,cloud-init-local,cloud-config,cloud-final
zerombr
clearpart --all
# Atomic differs from cloud - we want LVM
part /boot --size=300 --fstype="ext4"
part pv.01 --grow
volgroup atomicos pv.01
logvol / --size=3000 --fstype="xfs" --name=root --vgname=atomicos
# Equivalent of %include fedora-repo.ks
ostreesetup --nogpg --osname=fedora-atomic --remote=fedora-atomic --url=https://kojipkgs.fedoraproject.org/atomic/24/ --ref=fedora-atomic/24/x86_64/docker-host
reboot
%post --erroronfail
# See https://github.com/projectatomic/rpm-ostree/issues/42
ostree remote delete fedora-atomic
ostree remote add --set=gpg-verify=false fedora-atomic 'https://dl.fedoraproject.org/pub/fedora/linux/atomic/24/'
# older versions of livecd-tools do not follow "rootpw --lock" line above
# https://bugzilla.redhat.com/show_bug.cgi?id=964299
passwd -l root
# remove the user anaconda forces us to make
userdel -r none
# Configure docker-storage-setup to resize the partition table on boot
# https://github.com/projectatomic/docker-storage-setup/pull/25
echo 'GROWPART=true' > /etc/sysconfig/docker-storage-setup
echo -n "Getty fixes"
# although we want console output going to the serial console, we don't
# actually have the opportunity to login there. FIX.
# we don't really need to auto-spawn _any_ gettys.
sed -i '/^#NAutoVTs=.*/ a\
NAutoVTs=0' /etc/systemd/logind.conf
echo -n "Network fixes"
# initscripts don't like this file to be missing.
cat > /etc/sysconfig/network << EOF
NETWORKING=yes
NOZEROCONF=yes
EOF
# For cloud images, 'eth0' _is_ the predictable device name, since
# we don't want to be tied to specific virtual (!) hardware
rm -f /etc/udev/rules.d/70*
ln -s /dev/null /etc/udev/rules.d/80-net-setup-link.rules
# simple eth0 config, again not hard-coded to the build hardware
cat > /etc/sysconfig/network-scripts/ifcfg-eth0 << EOF
DEVICE="eth0"
BOOTPROTO="dhcp"
ONBOOT="yes"
TYPE="Ethernet"
PERSISTENT_DHCLIENT="yes"
EOF
# generic localhost names
cat > /etc/hosts << EOF
127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4
::1 localhost localhost.localdomain localhost6 localhost6.localdomain6
EOF
echo .
# Because memory is scarce resource in most cloud/virt environments,
# and because this impedes forensics, we are differing from the Fedora
# default of having /tmp on tmpfs.
echo "Disabling tmpfs for /tmp."
systemctl mask tmp.mount
# make sure firstboot doesn't start
echo "RUN_FIRSTBOOT=NO" > /etc/sysconfig/firstboot
# Uncomment this if you want to use cloud init but suppress the creation
# of an "ec2-user" account. This will, in the absence of further config,
# cause the ssh key from a metadata source to be put in the root account.
#cat <<EOF > /etc/cloud/cloud.cfg.d/50_suppress_ec2-user_use_root.cfg
#users: []
#disable_root: 0
#EOF
echo "Removing random-seed so it's not the same in every image."
rm -f /var/lib/random-seed
echo "Packages within this cloud image:"
echo "-----------------------------------------------------------------------"
rpm -qa
echo "-----------------------------------------------------------------------"
# Note that running rpm recreates the rpm db files which aren't needed/wanted
rm -f /var/lib/rpm/__db*
echo "Zeroing out empty space."
# This forces the filesystem to reclaim space from deleted files
dd bs=1M if=/dev/zero of=/var/tmp/zeros || :
rm -f /var/tmp/zeros
echo "(Don't worry -- that out-of-space error was expected.)"
echo "Adding Developer Mode GRUB2 menu item."
/usr/libexec/atomic-devmode/bootentry add
%end

View File

@ -1,23 +0,0 @@
%packages
fedora-release-budgie
# Exclude unwanted groups that fedora-live-base.ks pulls in
-@dial-up
-@input-methods
-@standard
# Install budgie environment
@^budgie-desktop-environment
# recommended apps
@budgie-desktop-apps
@libreoffice
libreoffice-draw
libreoffice-math
thunderbird
# Exclude unwanted packages from @anaconda-tools group
-gfs2-utils
-reiserfs-utils
%end

View File

@ -1,22 +0,0 @@
# fedora-cinnamon-common.ks
#
# Description:
# - Fedora package set for the Cinnamon Desktop Environment
#
# Maintainer(s):
# - Dan Book <grinnz@grinnz.com>
%packages
fedora-release-cinnamon
# install env-group to resolve RhBug:1891500
@^cinnamon-desktop-environment
@libreoffice
rhythmbox
# extra backgrounds
f36-backgrounds-extras-gnome
%end

View File

@ -0,0 +1,32 @@
# fedora-cinnamon-packages.ks
#
# Description:
# - Fedora package set for the Cinnamon Desktop Environment
#
# Maintainer(s):
# - Dan Book <grinnz@grinnz.com>
%packages
@networkmanager-submodules
@cinnamon-desktop
@libreoffice
# internet and multimedia
pidgin
hexchat
transmission
parole
# make sure we have a graphical installer
yumex-dnf
# extra backgrounds
desktop-backgrounds-basic
f24-backgrounds-extras-gnome
# save some space
-fedora-icon-theme
-PackageKit* # we switched to yumex, so we don't need this
%end

View File

@ -0,0 +1,31 @@
# PXE-to-Live Atomic: PXE boot directly into a running Atomic Host
# https://fedoraproject.org/wiki/Changes/AtomicHost
lang en_US.UTF-8
keyboard us
timezone America/New_York
zerombr
clearpart --all --initlabel
rootpw --lock --iscrypted locked
user --name=none
bootloader --timeout=1
network --bootproto=dhcp --device=link --activate
# We are only able to install atomic with separate /boot partition currently
part / --fstype="ext4" --size=6000
part /boot --size=500 --fstype="ext4"
shutdown
services --disabled=docker-storage-setup,network
services --enabled=NetworkManager,sshd,cloud-init,cloud-init-local,cloud-config,cloud-final
ostreesetup --nogpg --osname=fedora-atomic --remote=fedora-atomic --url=http://kojipkgs.fedoraproject.org/mash/atomic/22/ --ref=fedora-atomic/f22/x86_64/docker-host
%post
# Ensure the root password is locked, we use cloud-init
passwd -l root
userdel -r none
# We copy content of separate /boot partition to root part when building live squashfs image,
# and we don't want systemd to try to mount it when pxe booting
cat /dev/null > /etc/fstab
%end

12
fedora-cloud-base-arm.ks Normal file
View File

@ -0,0 +1,12 @@
%include fedora-cloud-base.ks
bootloader --timeout=1 --append="no_timer_check console=tty1 console=ttyAMA0,115200n8"
part /boot --fstype="ext4" --size=500
part /boot/efi --fstype="vfat" --size=100
%packages
efibootmgr
grub2-efi
shim
%end

View File

@ -1,24 +0,0 @@
# This is a basic Fedora cloud spin designed to work with Azure.
# Inherit from cloud base
%include fedora-cloud-base.ks
%packages
# Fedora Cloud Base includes the qemu guest agent and it is not
# required for Azure: https://pagure.io/cloud-sig/issue/319
-qemu-guest-agent
WALinuxAgent
%end
%post --erroronfail
cat > /etc/ssh/sshd_config.d/50-client-alive-interval.conf << EOF
ClientAliveInterval 120
EOF
cat >> /etc/chrony.conf << EOF
# Azure's virtual time source:
# https://docs.microsoft.com/en-us/azure/virtual-machines/linux/time-sync#check-for-ptp-clock-source
refclock PHC /dev/ptp_hyperv poll 3 dpoll -2 offset 0
EOF
%end

View File

@ -1,35 +0,0 @@
# This is a basic Fedora cloud spin designed to work with GCP.
# Note that GCP prefers UEFI so we'll need to make sure this image
# is created from a machine that is started in UEFI mode.
# Inherit from cloud base
%include fedora-cloud-base.ks
# Change serial port configuration to recommended default for GCP (ttyS0,38400n8d)
# Don't show bootloader as it's impossible for the user to get to it in time
# So we might as well not waste the 1 second on each boot.
# https://cloud.google.com/compute/docs/import/import-existing-image
bootloader --timeout=0 --location=mbr --append="no_timer_check net.ifnames=0 console=ttyS0,38400n8d"
# redefine `services` here to drop cloud-init systemd unit enablements from
# fedora-cloud-base.ks since we don't use them.
services --enabled=sshd
%packages
# GCP provides its own guest environment.
google-compute-engine-guest-configs
-cloud-init
# Fedora Cloud Base includes the qemu guest agent. GCP prefers
# that it not be installed https://pagure.io/cloud-sig/issue/319
-qemu-guest-agent
%end
%post --erroronfail
cat <<EOF > /etc/NetworkManager/conf.d/gcp-mtu.conf
# In GCP it is recommended to use 1460 as the MTU.
# Set it to 1460 for all connections.
# https://cloud.google.com/network-connectivity/docs/vpn/concepts/mtu-considerations
[connection]
ethernet.mtu = 1460
EOF
%end

10
fedora-cloud-base-ppc.ks Normal file
View File

@ -0,0 +1,10 @@
%include fedora-cloud-base.ks
bootloader --timeout=1 --append="no_timer_check console=tty1 console=ttyS0,115200n8"
part prepboot --fstype="prepboot" --size=4
part /boot --fstype="ext4" --size=500
%packages
grub2
%end

View File

@ -19,7 +19,7 @@ rootpw vagrant
# even on VirtualBox virt, we get a primary network device with "eth0" as the name
# This simplifies things and allows a single disk image for both supported Vagrant
# platforms (virtualbox and kvm)
bootloader --timeout=1 --location=mbr --append="no_timer_check console=tty1 console=ttyS0,115200n8 net.ifnames=0 biosdevname=0"
bootloader --timeout=1 --append="no_timer_check console=tty1 console=ttyS0,115200n8 net.ifnames=0 biosdevname=0" --extlinux
%packages
# The default koji Vagrantfile configuration uses rsync to sync files between
@ -32,8 +32,6 @@ dnf-yum
# users setup. This can actually take a bit of time. Just fold it
# in to the base box disk image
rsync
# Add in sshfs for vagrant-sshfs plugin
fuse-sshfs
%end
%post --erroronfail
@ -44,7 +42,7 @@ systemctl mask cloud-init cloud-init-local cloud-config cloud-final
# Vagrant setup
sed -i 's,Defaults\\s*requiretty,Defaults !requiretty,' /etc/sudoers
echo 'vagrant ALL=(ALL) NOPASSWD: ALL' > /etc/sudoers.d/vagrant-nopasswd
echo 'vagrant ALL=NOPASSWD: ALL' > /etc/sudoers.d/vagrant-nopasswd
sed -i 's/.*UseDNS.*/UseDNS no/' /etc/ssh/sshd_config
mkdir -m 0700 -p ~vagrant/.ssh
cat > ~vagrant/.ssh/authorized_keys << EOKEYS
@ -53,12 +51,6 @@ EOKEYS
chmod 600 ~vagrant/.ssh/authorized_keys
chown -R vagrant:vagrant ~vagrant/.ssh/
cat > /etc/ssh/sshd_config.d/10-vagrant-insecure-rsa-key.conf <<EOF
# For now the vagrant insecure key is an rsa key
# https://github.com/hashicorp/vagrant/issues/11783
PubkeyAcceptedKeyTypes=+ssh-rsa
EOF
# Further suggestion from @purpleidea (James Shubin) - extend key to root users as well
mkdir -m 0700 -p /root/.ssh
cp /home/vagrant/.ssh/authorized_keys /root/.ssh/authorized_keys

View File

@ -1,151 +1,269 @@
# This is a basic Fedora cloud spin designed to work in OpenStack and other
# This is a basic Fedora 21 spin designed to work in OpenStack and other
# private cloud environments. It's configured with cloud-init so it will
# take advantage of ec2-compatible metadata services for provisioning ssh
# keys. Cloud-init creates a user account named "fedora" with passwordless
# sudo access. The root password is empty and locked by default.
#
# Note that unlike the standard F20 install, this image has /tmp on disk
# rather than in tmpfs, since memory is usually at a premium.
#
# This kickstart file is designed to be used with ImageFactory (in Koji).
#
# To do a local build, you'll need to install ImageFactory. See
# http://worknotes.readthedocs.org/en/latest/cloudimages.html for some notes.
#
# For a TDL file, I store one here:
# https://pagure.io/fedora-atomic/raw/master/f/fedora-atomic-rawhide.tdl
# https://git.fedorahosted.org/cgit/fedora-atomic.git/tree/fedora-atomic-rawhide.tdl
# (Koji generates one internally...what we really want is Koji to publish it statically)
#
# Once you have imagefactory and imagefactory-plugins installed, run:
#
# curl -O https://pagure.io/fedora-atomic/raw/master/f/fedora-atomic-rawhide.tdl
# curl -O https://git.fedorahosted.org/cgit/fedora-atomic.git/plain/fedora-atomic-rawhide.tdl
# tempfile=$(mktemp --suffix=.ks)
# ksflatten -v F22 -c fedora-cloud-base.ks > ${tempfile}
# imagefactory --debug base_image --file-parameter install_script ${tempfile} fedora-atomic-rawhide.tdl
#
text # don't use cmdline -- https://github.com/rhinstaller/anaconda/issues/931
cmdline
lang en_US.UTF-8
keyboard us
timezone --utc Etc/UTC
auth --useshadow --passalgo=sha512
selinux --enforcing
rootpw --lock --iscrypted locked
user --name=none
firewall --disabled
# We pass net.ifnames=0 because we always want to use eth0 here on all the cloud images.
bootloader --timeout=1 --location=mbr --append="no_timer_check net.ifnames=0 console=tty1 console=ttyS0,115200n8"
bootloader --timeout=1 --append="no_timer_check console=tty1 console=ttyS0,115200n8" --extlinux
services --enabled=sshd,cloud-init,cloud-init-local,cloud-config,cloud-final
network --bootproto=dhcp --device=link --activate --onboot=on
services --enabled=network,sshd,rsyslog,cloud-init,cloud-init-local,cloud-config,cloud-final
# Configure for gpt with bios+uefi
clearpart --all --initlabel --disklabel=gpt
part prepboot --size=4 --fstype=prepboot
part biosboot --size=1 --fstype=biosboot
part /boot/efi --size=100 --fstype=efi
part /boot --size=1000 --fstype=ext4 --label=boot
part btrfs.007 --size=2000 --fstype=btrfs --grow
btrfs none --label=fedora btrfs.007
btrfs /home --subvol --name=home LABEL=fedora
btrfs / --subvol --name=root LABEL=fedora
zerombr
clearpart --all
part / --fstype ext4 --grow
%include fedora-repo.ks
reboot
##### begin package list #############################################
%packages --instLangs=en
# Package list.
# FIXME: instLangs does not work, so there's a hack below
# (see https://bugzilla.redhat.com/show_bug.cgi?id=1051816)
# FIXME: instLangs bug has been fixed but now having instLangs
# with an arg causes no langs to get installed because of BZ1262040
# which yields the errors in BZ1261249. For now fix by not using
# --instLangs at all
#%packages --instLangs=en
%packages
# Include packages for the cloud-server-environment group
@^cloud-server-environment
# Don't include the kernel toplevel package since it pulls in
# kernel-modules. We're happy for now with kernel-core.
-kernel
kernel-core
@^cloud-server-environment
# Need to pull in the udev subpackage
systemd-udev
# Don't include dracut-config-rescue. It will have dracut generate a
# "rescue" entry in the grub menu, but that also means there is a
# rescue kernel and initramfs that get created, which (currently) add
# about another 40MiB to the /boot/ partition. Also the "rescue" mode
# is generally not useful in the cloud.
# after move away from grub2 - let's add 'which' back
which
# rescue mode generally isn't useful in the cloud context
-dracut-config-rescue
# Plymouth provides a graphical boot animation. In the cloud we don't
# need a graphical boot animation. This also means anaconda won't put
# rhgb/quiet on kernel command line
-plymouth
# Some things from @core we can do without in a minimal install
-biosdevname
# Need to also add back plymouth in order to mask failure of
# systemd-vconsole-setup.service. BZ#1272684. Comment out for now
#-plymouth
-NetworkManager
-iprutils
# Now that BZ#1199868 is fixed kbd really gets removed but it breaks
# systemd-vconsole-setup.service on boot. Comment out for now
#-kbd
-uboot-tools
-kernel
-grub2
# Install qemu-guest-agent https://pagure.io/cloud-sig/issue/319 To
# improve the integration with OpenStack and other VM management
# systems (oVirt, KubeVirt).
qemu-guest-agent
# No need for firewalld for now. We don't have a firewall on by default.
-firewalld
# Don't include the geolite2 databases, which end up with 66MiB
# in /usr/share/GeoIP
-geolite2-country
-geolite2-city
%end
##### end package list ###############################################
##### begin kickstart post ###########################################
%post --erroronfail
if [ "$(arch)" = "x86_64" ]; then
# Set up legacy BIOS boot if we booted from UEFI
grub2-install --target=i386-pc /dev/vda
fi
# Create grub.conf for EC2. This used to be done by appliance creator but
# anaconda doesn't do it. And, in case appliance-creator is used, we're
# overriding it here so that both cases get the exact same file.
# Note that the console line is different -- that's because EC2 provides
# different virtual hardware, and this is a convenient way to act differently
echo -n "Creating grub.conf for pvgrub"
rootuuid=$( awk '$2=="/" { print $1 };' /etc/fstab )
mkdir /boot/grub
echo -e 'default=0\ntimeout=0\n\n' > /boot/grub/grub.conf
for kv in $( ls -1v /boot/vmlinuz* |grep -v rescue |sed s/.*vmlinuz-// ); do
echo "title Fedora ($kv)" >> /boot/grub/grub.conf
echo -e "\troot (hd0,0)" >> /boot/grub/grub.conf
echo -e "\tkernel /boot/vmlinuz-$kv ro root=$rootuuid no_timer_check console=hvc0 LANG=en_US.UTF-8" >> /boot/grub/grub.conf
echo -e "\tinitrd /boot/initramfs-$kv.img" >> /boot/grub/grub.conf
echo
done
# Blivet sets pmbr_boot flag erroneously and we need to purge it
# otherwise it'll fail to boot
parted /dev/vda disk_set pmbr_boot off
# linux-firmware is installed by default and is quite large. As of mid 2020:
# Total download size: 97 M
# Installed size: 268 M
# So far we've been fine shipping without it so let's continue.
# More discussion about this in #1234504.
#link grub.conf to menu.lst for ec2 to work
echo -n "Linking menu.lst to old-style grub.conf for pv-grub"
ln -sf grub.conf /boot/grub/menu.lst
ln -sf /boot/grub/grub.conf /etc/grub.conf
# older versions of livecd-tools do not follow "rootpw --lock" line above
# https://bugzilla.redhat.com/show_bug.cgi?id=964299
passwd -l root
# remove the user anaconda forces us to make
userdel -r none
# Kickstart specifies timeout in seconds; syslinux uses 10ths.
# 0 means wait forever, so instead we'll go with 1.
sed -i 's/^timeout 10/timeout 1/' /boot/extlinux/extlinux.conf
# setup systemd to boot to the right runlevel
echo -n "Setting default runlevel to multiuser text mode"
rm -f /etc/systemd/system/default.target
ln -s /lib/systemd/system/multi-user.target /etc/systemd/system/default.target
echo .
# this is installed by default but we don't need it in virt
# Commenting out the following for #1234504
# rpm works just fine for removing this, no idea why dnf can't cope
echo "Removing linux-firmware package."
rpm -e linux-firmware
# See the systemd-random-seed.service man page that says:
# " It is recommended to remove the random seed from OS images intended
# for replication on multiple systems"
# Remove firewalld; was supposed to be optional in F18+, but is pulled in
# in install/image building.
echo "Removing firewalld."
# FIXME! clean_requirements_on_remove is the default with DNF, but may
# not work when package was installed by Anaconda instead of command line.
# Also -- check if this is still even needed with new anaconda -- disabled
# firewall should _not_ pull in this package.
# yum -C -y remove "firewalld*" --setopt="clean_requirements_on_remove=1"
dnf -C -y erase "firewalld*"
# Another one needed at install time but not after that, and it pulls
# in some unneeded deps (like, newt and slang)
echo "Removing authconfig."
dnf -C -y erase authconfig
# instlang hack. (Note! See bug referenced above package list)
find /usr/share/locale -mindepth 1 -maxdepth 1 -type d -not -name en_US -exec rm -rf {} +
localedef --list-archive | grep -v ^en_US | xargs localedef --delete-from-archive
# this will kill a live system (since it's memory mapped) but should be safe offline
mv -f /usr/lib/locale/locale-archive /usr/lib/locale/locale-archive.tmpl
build-locale-archive
echo '%_install_langs C:en:en_US:en_US.UTF-8' >> /etc/rpm/macros.image-language-conf
awk '(NF==0&&!done){print "override_install_langs='$LANG'";done=1}{print}' \
< /etc/yum.conf > /etc/yum.conf.new
mv /etc/yum.conf.new /etc/yum.conf
echo -n "Getty fixes"
# although we want console output going to the serial console, we don't
# actually have the opportunity to login there. FIX.
# we don't really need to auto-spawn _any_ gettys.
sed -i '/^#NAutoVTs=.*/ a\
NAutoVTs=0' /etc/systemd/logind.conf
echo -n "Network fixes"
# initscripts don't like this file to be missing.
# and https://bugzilla.redhat.com/show_bug.cgi?id=1204612
cat > /etc/sysconfig/network << EOF
NETWORKING=yes
NOZEROCONF=yes
DEVTIMEOUT=10
EOF
# For cloud images, 'eth0' _is_ the predictable device name, since
# we don't want to be tied to specific virtual (!) hardware
rm -f /etc/udev/rules.d/70*
ln -s /dev/null /etc/udev/rules.d/80-net-setup-link.rules
# simple eth0 config, again not hard-coded to the build hardware
cat > /etc/sysconfig/network-scripts/ifcfg-eth0 << EOF
DEVICE="eth0"
BOOTPROTO="dhcp"
ONBOOT="yes"
TYPE="Ethernet"
PERSISTENT_DHCLIENT="yes"
EOF
# generic localhost names
cat > /etc/hosts << EOF
127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4
::1 localhost localhost.localdomain localhost6 localhost6.localdomain6
EOF
echo .
# Because memory is scarce resource in most cloud/virt environments,
# and because this impedes forensics, we are differing from the Fedora
# default of having /tmp on tmpfs.
echo "Disabling tmpfs for /tmp."
systemctl mask tmp.mount
# make sure firstboot doesn't start
echo "RUN_FIRSTBOOT=NO" > /etc/sysconfig/firstboot
# Uncomment this if you want to use cloud init but suppress the creation
# of an "ec2-user" account. This will, in the absence of further config,
# cause the ssh key from a metadata source to be put in the root account.
#cat <<EOF > /etc/cloud/cloud.cfg.d/50_suppress_ec2-user_use_root.cfg
#users: []
#disable_root: 0
#EOF
echo "Removing random-seed so it's not the same in every image."
rm -f /var/lib/systemd/random-seed
rm -f /var/lib/random-seed
echo "Cleaning old dnf repodata."
# FIXME: clear history?
dnf clean all
truncate -c -s 0 /var/log/dnf.log
truncate -c -s 0 /var/log/dnf.rpm.log
echo "Import RPM GPG key"
releasever=$(rpm --eval '%{fedora}')
releasever=$(rpm -q --qf '%{version}\n' fedora-release)
basearch=$(uname -i)
rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-$releasever-$basearch
echo "Packages within this cloud image:"
echo "-----------------------------------------------------------------------"
rpm -qa
echo "-----------------------------------------------------------------------"
# Note that running rpm recreates the rpm db files which aren't needed/wanted
rm -f /var/lib/rpm/__db*
# This is a temporary workaround for
# <https://bugzilla.redhat.com/show_bug.cgi?id=1147998>
# where sfdisk seems to be messing up the mbr.
# Long-term fix is to address this in anaconda directly and remove this.
# <https://bugzilla.redhat.com/show_bug.cgi?id=1015931>
dd if=/usr/share/syslinux/mbr.bin of=/dev/vda
# FIXME: is this still needed?
echo "Fixing SELinux contexts."
touch /var/log/cron
touch /var/log/boot.log
chattr -i /boot/extlinux/ldlinux.sys
/usr/sbin/fixfiles -R -a restore
chattr +i /boot/extlinux/ldlinux.sys
echo "Zeroing out empty space."
# Create zeros file with nodatacow and no compression
touch /var/tmp/zeros
chattr +C /var/tmp/zeros
# This forces the filesystem to reclaim space from deleted files
dd bs=1M if=/dev/zero of=/var/tmp/zeros || :
echo "(Don't worry -- that out-of-space error was expected.)"
# Force sync to disk (Cf. https://pagure.io/cloud-sig/issue/340#comment-743430)
btrfs filesystem sync /
rm -f /var/tmp/zeros
btrfs filesystem sync /
echo "(Don't worry -- that out-of-space error was expected.)"
# When we build the image a networking config file gets left behind.
# Let's clean it up.
echo "Cleanup leftover networking configuration"
rm -f /etc/NetworkManager/system-connections/*.nmconnection
# Truncate the /etc/resolv.conf left over from NetworkManager during the
# kickstart. This causes delays in boot with cloud-init because the
# 192.168.122.1 DNS server cannot be reached.
truncate -s 0 /etc/resolv.conf
# Clear machine-id on pre generated images
truncate -s 0 /etc/machine-id
# For trac ticket https://fedorahosted.org/cloud/ticket/128
rm -f /etc/sysconfig/network-scripts/ifcfg-ens3
%end
##### end kickstart post ############################################

223
fedora-cloud-bigdata.ks Normal file
View File

@ -0,0 +1,223 @@
# This is a Fedora 21 spin designed based on the Fedora Cloud Base Image
# but tailored specifically for Big Data processing out-of-the-box.
# Primarily, it builds on that image but adds extra packages, but over
# time may have additional focus.
#
# It's configured with cloud-init so it will take advantage of
# ec2-compatible metadata services for provisioning ssh keys. Cloud-init
# creates a user account named "fedora" with passwordless sudo access. The
# root password is empty and locked by default.
#
# Note that unlike the standard F20 install, this image has /tmp on disk
# rather than in tmpfs, since memory is usually at a premium.
text
lang en_US.UTF-8
keyboard us
timezone --utc Etc/UTC
auth --useshadow --passalgo=sha512
selinux --enforcing
rootpw --lock --iscrypted locked
user --name=none
firewall --disabled
bootloader --timeout=1 --append="no_timer_check console=tty1 console=ttyS0,115200n8" --extlinux
network --bootproto=dhcp --device=eth0 --activate --onboot=on
services --enabled=network,sshd,rsyslog,cloud-init,cloud-init-local,cloud-config,cloud-final
zerombr
clearpart --all
part / --size 3000 --fstype ext4
%include fedora-repo.ks
reboot
# Package list.
%packages
fedora-release-cloud
kernel-core
@core
@cloud-server
# Needed initially, but removed below.
firewalld
# rescue mode generally isn't useful in the cloud context
-dracut-config-rescue
# Some things from @core we can do without in a minimal install
-biosdevname
-plymouth
-NetworkManager
-iprutils
-kbd
-uboot-tools
-kernel
-grub2
%end
%post --erroronfail
# Create grub.conf for EC2. This used to be done by appliance creator but
# anaconda doesn't do it. And, in case appliance-creator is used, we're
# overriding it here so that both cases get the exact same file.
# Note that the console line is different -- that's because EC2 provides
# different virtual hardware, and this is a convenient way to act differently
echo -n "Creating grub.conf for pvgrub"
rootuuid=$( awk '$2=="/" { print $1 };' /etc/fstab )
mkdir /boot/grub
echo -e 'default=0\ntimeout=0\n\n' > /boot/grub/grub.conf
for kv in $( ls -1v /boot/vmlinuz* |grep -v rescue |sed s/.*vmlinuz-// ); do
echo "title Fedora ($kv)" >> /boot/grub/grub.conf
echo -e "\troot (hd0,0)" >> /boot/grub/grub.conf
echo -e "\tkernel /boot/vmlinuz-$kv ro root=$rootuuid no_timer_check console=hvc0 LANG=en_US.UTF-8" >> /boot/grub/grub.conf
echo -e "\tinitrd /boot/initramfs-$kv.img" >> /boot/grub/grub.conf
echo
done
#link grub.conf to menu.lst for ec2 to work
echo -n "Linking menu.lst to old-style grub.conf for pv-grub"
ln -sf grub.conf /boot/grub/menu.lst
ln -sf /boot/grub/grub.conf /etc/grub.conf
# older versions of livecd-tools do not follow "rootpw --lock" line above
# https://bugzilla.redhat.com/show_bug.cgi?id=964299
passwd -l root
# remove the user anaconda forces us to make
userdel -r none
# Kickstart specifies timeout in seconds; syslinux uses 10ths.
# 0 means wait forever, so instead we'll go with 1.
sed -i 's/^timeout 10/timeout 1/' /boot/extlinux/extlinux.conf
# setup systemd to boot to the right runlevel
echo -n "Setting default runlevel to multiuser text mode"
rm -f /etc/systemd/system/default.target
ln -s /lib/systemd/system/multi-user.target /etc/systemd/system/default.target
echo .
# this is installed by default but we don't need it in virt
# Commenting out the following for #1234504
# rpm works just fine for removing this, no idea why dnf can't cope
echo "Removing linux-firmware package."
rpm -e linux-firmware
# Remove firewalld; was supposed to be optional in F18+, but is required to
# be present for install/image building.
echo "Removing firewalld."
yum -C -y remove firewalld --setopt="clean_requirements_on_remove=1"
# Another one needed at install time but not after that, and it pulls
# in some unneeded deps (like, newt and slang)
echo "Removing authconfig."
yum -C -y remove authconfig --setopt="clean_requirements_on_remove=1"
echo -n "Getty fixes"
# although we want console output going to the serial console, we don't
# actually have the opportunity to login there. FIX.
# we don't really need to auto-spawn _any_ gettys.
sed -i '/^#NAutoVTs=.*/ a\
NAutoVTs=0' /etc/systemd/logind.conf
echo -n "Network fixes"
# initscripts don't like this file to be missing.
cat > /etc/sysconfig/network << EOF
NETWORKING=yes
NOZEROCONF=yes
EOF
# For cloud images, 'eth0' _is_ the predictable device name, since
# we don't want to be tied to specific virtual (!) hardware
rm -f /etc/udev/rules.d/70*
ln -s /dev/null /etc/udev/rules.d/80-net-setup-link.rules
# simple eth0 config, again not hard-coded to the build hardware
cat > /etc/sysconfig/network-scripts/ifcfg-eth0 << EOF
DEVICE="eth0"
BOOTPROTO="dhcp"
ONBOOT="yes"
TYPE="Ethernet"
PERSISTENT_DHCLIENT="yes"
EOF
# generic localhost names
cat > /etc/hosts << EOF
127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4
::1 localhost localhost.localdomain localhost6 localhost6.localdomain6
EOF
echo .
# Because memory is scarce resource in most cloud/virt environments,
# and because this impedes forensics, we are differing from the Fedora
# default of having /tmp on tmpfs.
echo "Disabling tmpfs for /tmp."
systemctl mask tmp.mount
# make sure firstboot doesn't start
echo "RUN_FIRSTBOOT=NO" > /etc/sysconfig/firstboot
# Uncomment this if you want to use cloud init but suppress the creation
# of an "ec2-user" account. This will, in the absence of further config,
# cause the ssh key from a metadata source to be put in the root account.
#cat <<EOF > /etc/cloud/cloud.cfg.d/50_suppress_ec2-user_use_root.cfg
#users: []
#disable_root: 0
#EOF
echo "Removing random-seed so it's not the same in every image."
rm -f /var/lib/random-seed
echo "Cleaning old yum repodata."
yum history new
yum clean all
truncate -c -s 0 /var/log/yum.log
echo "Import RPM GPG key"
releasever=$(rpm -q --qf '%{version}\n' fedora-release)
basearch=$(uname -i)
rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-$releasever-$basearch
echo "Packages within this cloud image:"
echo "-----------------------------------------------------------------------"
rpm -qa
echo "-----------------------------------------------------------------------"
# Note that running rpm recreates the rpm db files which aren't needed/wanted
rm -f /var/lib/rpm/__db*
# This is a temporary workaround for
# <https://bugzilla.redhat.com/show_bug.cgi?id=1147998>
# where sfdisk seems to be messing up the mbr.
# Long-term fix is to address this in anaconda directly and remove this.
# <https://bugzilla.redhat.com/show_bug.cgi?id=1015931>
dd if=/usr/share/syslinux/mbr.bin of=/dev/vda
echo "Fixing SELinux contexts."
touch /var/log/cron
touch /var/log/boot.log
mkdir -p /var/cache/yum
chattr -i /boot/extlinux/ldlinux.sys
/usr/sbin/fixfiles -R -a restore
chattr +i /boot/extlinux/ldlinux.sys
echo "Zeroing out empty space."
# This forces the filesystem to reclaim space from deleted files
dd bs=1M if=/dev/zero of=/var/tmp/zeros || :
rm -f /var/tmp/zeros
echo "(Don't worry -- that out-of-space error was expected.)"
%end

View File

@ -0,0 +1,215 @@
# This is a spin of the Fedora cloud image designed for trying out new
# images in rawhide. It won't be built for non-rawhide trees, let alone
# actual releases.
cmdline
lang en_US.UTF-8
keyboard us
timezone --utc Etc/UTC
auth --useshadow --passalgo=sha512
selinux --enforcing
rootpw --lock --iscrypted locked
user --name=none
firewall --disabled
bootloader --timeout=1 --append="no_timer_check console=tty1 console=ttyS0,115200n8" --extlinux
network --bootproto=dhcp --device=eth0 --activate --onboot=on
services --enabled=network,sshd,rsyslog,cloud-init,cloud-init-local,cloud-config,cloud-final
zerombr
clearpart --all
part / --size 3000 --fstype ext4
%include fedora-repo.ks
reboot
# Package list.
%packages --excludedocs --instLangs=en_US
fedora-release-cloud
kernel-core
@core
@cloud-server
# rescue mode generally isn't useful in the cloud context
-dracut-config-rescue
# Needed initially, but removed below.
firewalld
# Some things from @core we can do without in a minimal install
-biosdevname
-plymouth
-NetworkManager
-iprutils
-kbd
-uboot-tools
-kernel
-grub2
%end
%post --erroronfail
# Create grub.conf for EC2. This used to be done by appliance creator but
# anaconda doesn't do it. And, in case appliance-creator is used, we're
# overriding it here so that both cases get the exact same file.
# Note that the console line is different -- that's because EC2 provides
# different virtual hardware, and this is a convenient way to act differently
echo -n "Creating grub.conf for pvgrub"
rootuuid=$( awk '$2=="/" { print $1 };' /etc/fstab )
mkdir /boot/grub
echo -e 'default=0\ntimeout=0\n\n' > /boot/grub/grub.conf
for kv in $( ls -1v /boot/vmlinuz* |grep -v rescue |sed s/.*vmlinuz-// ); do
echo "title Fedora ($kv)" >> /boot/grub/grub.conf
echo -e "\troot (hd0,0)" >> /boot/grub/grub.conf
echo -e "\tkernel /boot/vmlinuz-$kv ro root=$rootuuid no_timer_check console=hvc0 LANG=en_US.UTF-8" >> /boot/grub/grub.conf
echo -e "\tinitrd /boot/initramfs-$kv.img" >> /boot/grub/grub.conf
echo
done
#link grub.conf to menu.lst for ec2 to work
echo -n "Linking menu.lst to old-style grub.conf for pv-grub"
ln -sf grub.conf /boot/grub/menu.lst
ln -sf /boot/grub/grub.conf /etc/grub.conf
# older versions of livecd-tools do not follow "rootpw --lock" line above
# https://bugzilla.redhat.com/show_bug.cgi?id=964299
passwd -l root
# remove the user anaconda forces us to make
userdel -r none
# Kickstart specifies timeout in seconds; syslinux uses 10ths.
# 0 means wait forever, so instead we'll go with 1.
sed -i 's/^timeout 10/timeout 1/' /boot/extlinux/extlinux.conf
# setup systemd to boot to the right runlevel
echo -n "Setting default runlevel to multiuser text mode"
rm -f /etc/systemd/system/default.target
ln -s /lib/systemd/system/multi-user.target /etc/systemd/system/default.target
echo .
# this is installed by default but we don't need it in virt
# Commenting out the following for #1234504
# rpm works just fine for removing this, no idea why dnf can't cope
echo "Removing linux-firmware package."
rpm -e linux-firmware
# Remove firewalld; was supposed to be optional in F18+, but is required to
# be present for install/image building.
echo "Removing firewalld."
yum -C -y remove "firewalld*" --setopt="clean_requirements_on_remove=1"
# Another one needed at install time but not after that, and it pulls
# in some unneeded deps (like, newt and slang)
echo "Removing authconfig."
yum -C -y remove authconfig --setopt="clean_requirements_on_remove=1"
echo -n "Getty fixes"
# although we want console output going to the serial console, we don't
# actually have the opportunity to login there. FIX.
# we don't really need to auto-spawn _any_ gettys.
sed -i '/^#NAutoVTs=.*/ a\
NAutoVTs=0' /etc/systemd/logind.conf
echo -n "Network fixes"
# initscripts don't like this file to be missing.
cat > /etc/sysconfig/network << EOF
NETWORKING=yes
NOZEROCONF=yes
EOF
# For cloud images, 'eth0' _is_ the predictable device name, since
# we don't want to be tied to specific virtual (!) hardware
rm -f /etc/udev/rules.d/70*
ln -s /dev/null /etc/udev/rules.d/80-net-setup-link.rules
# simple eth0 config, again not hard-coded to the build hardware
cat > /etc/sysconfig/network-scripts/ifcfg-eth0 << EOF
DEVICE="eth0"
BOOTPROTO="dhcp"
ONBOOT="yes"
TYPE="Ethernet"
PERSISTENT_DHCLIENT="yes"
EOF
# generic localhost names
cat > /etc/hosts << EOF
127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4
::1 localhost localhost.localdomain localhost6 localhost6.localdomain6
EOF
echo .
# Because memory is scarce resource in most cloud/virt environments,
# and because this impedes forensics, we are differing from the Fedora
# default of having /tmp on tmpfs.
echo "Disabling tmpfs for /tmp."
systemctl mask tmp.mount
# make sure firstboot doesn't start
echo "RUN_FIRSTBOOT=NO" > /etc/sysconfig/firstboot
# Uncomment this if you want to use cloud init but suppress the creation
# of an "ec2-user" account. This will, in the absence of further config,
# cause the ssh key from a metadata source to be put in the root account.
#cat <<EOF > /etc/cloud/cloud.cfg.d/50_suppress_ec2-user_use_root.cfg
#users: []
#disable_root: 0
#EOF
echo "Removing random-seed so it's not the same in every image."
rm -f /var/lib/random-seed
echo "Cleaning old yum repodata."
yum history new
yum clean all
truncate -c -s 0 /var/log/yum.log
echo "Import RPM GPG key"
releasever=$(rpm -q --qf '%{version}\n' fedora-release)
basearch=$(uname -i)
rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-$releasever-$basearch
echo "Packages within this cloud image:"
echo "-----------------------------------------------------------------------"
rpm -qa
echo "-----------------------------------------------------------------------"
# Note that running rpm recreates the rpm db files which aren't needed/wanted
rm -f /var/lib/rpm/__db*
# This is a temporary workaround for
# <https://bugzilla.redhat.com/show_bug.cgi?id=1147998>
# where sfdisk seems to be messing up the mbr.
# Long-term fix is to address this in anaconda directly and remove this.
# <https://bugzilla.redhat.com/show_bug.cgi?id=1015931>
dd if=/usr/share/syslinux/mbr.bin of=/dev/vda
echo "Fixing SELinux contexts."
touch /var/log/cron
touch /var/log/boot.log
mkdir -p /var/cache/yum
chattr -i /boot/extlinux/ldlinux.sys
/usr/sbin/fixfiles -R -a restore
chattr +i /boot/extlinux/ldlinux.sys
echo "Zeroing out empty space."
# This forces the filesystem to reclaim space from deleted files
dd bs=1M if=/dev/zero of=/var/tmp/zeros || :
rm -f /var/tmp/zeros
echo "(Don't worry -- that out-of-space error was expected.)"
%end

View File

@ -1,29 +0,0 @@
# Description: Packages for the NeuroFedora computational neuroscience lab image.
#
# Maintained by the NeuroFedora SIG:
# https://neuro.fedoraproject.org
# mailto:neuro-sig@lists.fedoraproject.org
%packages
fedora-release-compneuro
# Includes numpy, scipy, jupyter, pandas, scikit, scipy, statsmodels, sympy, matplotlib
@python-science
#Computational neuroscience packages
arbor
genesis-simulator
moose
nest
neuron
neuron-devel
python3
python3-brian2
python3-ipython
python3-lfpy
python3-nest
python3-netpyne
python3-neuron
python3-pynn
python3-steps
%end

View File

@ -1,70 +0,0 @@
# See fedora-container-common.ks for details on how to hack on container image kickstarts
# This base is a stripped back Fedora image without python3/dnf.
# If you need that use the standard base image.
%include fedora-container-common.ks
%packages --excludedocs --instLangs=en --nocore --excludeWeakdeps
microdnf
%end
%post --erroronfail --log=/root/anaconda-post.log
# remove some random help txt files
rm -fv usr/share/gnupg/help*.txt
# Pruning random things
rm usr/lib/rpm/rpm.daily
rm -rfv usr/lib64/nss/unsupported-tools/ # unsupported
# Statically linked crap
rm -fv usr/sbin/{glibc_post_upgrade.x86_64,sln}
ln usr/bin/ln usr/sbin/sln
# Remove some dnf info
rm -rfv /var/lib/dnf
# don't need icons
rm -rfv /usr/share/icons/*
#some random not-that-useful binaries
rm -fv /usr/bin/pinky
# we lose presets by removing /usr/lib/systemd but we do not care
rm -rfv /usr/lib/systemd
# if you want to change the timezone, bind-mount it from the host or reinstall tzdata
rm -fv /etc/localtime
mv /usr/share/zoneinfo/UTC /etc/localtime
rm -rfv /usr/share/zoneinfo
# Final pruning
rm -rfv /var/cache/* /var/log/* /tmp/*
%end
%post --nochroot --erroronfail --log=/mnt/sysimage/root/anaconda-post-nochroot.log
set -eux
# https://bugzilla.redhat.com/show_bug.cgi?id=1343138
# Fix /run/lock breakage since it's not tmpfs in docker
# This unmounts /run (tmpfs) and then recreates the files
# in the /run directory on the root filesystem of the container
# NOTE: run this in nochroot because "umount" does not exist in chroot
umount /mnt/sysimage/run
# The file that specifies the /run/lock tmpfile is
# /usr/lib/tmpfiles.d/legacy.conf, which is part of the systemd
# rpm that isn't included in this image. We'll create the /run/lock
# file here manually with the settings from legacy.conf
# NOTE: chroot to run "install" because it is not in anaconda env
chroot /mnt/sysimage install -d /run/lock -m 0755 -o root -g root
# See: https://bugzilla.redhat.com/show_bug.cgi?id=1051816
# NOTE: run this in nochroot because "find" does not exist in chroot
KEEPLANG=en_US
for dir in locale i18n; do
find /mnt/sysimage/usr/share/${dir} -mindepth 1 -maxdepth 1 -type d -not \( -name "${KEEPLANG}" -o -name POSIX \) -exec rm -rfv {} +
done
%end

View File

@ -1,57 +0,0 @@
# See fedora-container-common.ks for details on how to hack on container image kickstarts
# This base is a standard Fedora image with python3 and dnf
%include fedora-container-common.ks
%packages --excludedocs --instLangs=en --nocore --excludeWeakdeps
rootfiles
# https://communityblog.fedoraproject.org/modularity-dead-long-live-modularity/
fedora-repos-modular
tar # https://bugzilla.redhat.com/show_bug.cgi?id=1409920
vim-minimal
dnf
dnf-yum # https://fedorahosted.org/fesco/ticket/1312#comment:29
sudo
-glibc-langpack-en
-langpacks-en
%end
%post --erroronfail --log=/root/anaconda-post.log
# remove some extraneous files
rm -rf /var/cache/dnf/*
rm -rf /tmp/*
# https://pagure.io/atomic-wg/issue/308
printf "tsflags=nodocs\n" >>/etc/dnf/dnf.conf
# https://bugzilla.redhat.com/show_bug.cgi?id=1343138
# Fix /run/lock breakage since it's not tmpfs in docker
# This unmounts /run (tmpfs) and then recreates the files
# in the /run directory on the root filesystem of the container
#
# We ignore the return code of the systemd-tmpfiles command because
# at this point we have already removed the /etc/machine-id and all
# tmpfiles lines with %m in them will fail and cause a bad return
# code. Example failure:
# [/usr/lib/tmpfiles.d/systemd.conf:26] Failed to replace specifiers: /run/log/journal/%m
#
umount /run
rm -f /run/nologin # https://pagure.io/atomic-wg/issue/316
# Final pruning
rm -rfv /var/cache/* /var/log/* /tmp/*
%end
%post --nochroot --erroronfail --log=/mnt/sysimage/root/anaconda-post-nochroot.log
set -eux
# See: https://bugzilla.redhat.com/show_bug.cgi?id=1051816
# NOTE: run this in nochroot because "find" does not exist in chroot
KEEPLANG=en_US
for dir in locale i18n; do
find /mnt/sysimage/usr/share/${dir} -mindepth 1 -maxdepth 1 -type d -not \( -name "${KEEPLANG}" -o -name POSIX \) -exec rm -rfv {} +
done
%end

View File

@ -1,88 +0,0 @@
# This is the common bits between Fedora Container base image.
#
# To keep this image minimal it only installs English language. You need to change
# dnf configuration in order to enable other languages.
#
# ## Hacking on this image ###
# This kickstart is processed using Anaconda-in-ImageFactory (via Koji typically),
# but you can run imagefactory locally too.
#
# To do so, testing local changes, first you'll need a TDL file. I store one here:
# https://pagure.io/fedora-atomic/raw/master/f/fedora-atomic-rawhide.tdl
#
# Then, once you have imagefactory and imagefactory-plugins installed, run:
#
# ksflatten -c fedora-container-base[-minimal].ks -o fedora-container-base-test.ks
# imagefactory --debug target_image --template /path/to/fedora-atomic-rawhide.tdl --parameter offline_icicle true --file-parameter install_script $(pwd)/fedora-container-base-test.ks docker
#
text # don't use cmdline -- https://github.com/rhinstaller/anaconda/issues/931
bootloader --disabled
timezone --isUtc Etc/UTC
timesource --ntp-disable
rootpw --lock --iscrypted locked
keyboard us
network --bootproto=dhcp --device=link --activate --onboot=on
reboot
# boot partitions are irrelevant as the final docker image is a tarball
zerombr
clearpart --all
autopart --noboot --nohome --noswap --nolvm
%packages --excludedocs --instLangs=en --nocore --excludeWeakdeps
fedora-release-container
bash
coreutils
glibc-minimal-langpack
rpm
util-linux-core
-kernel
-dosfstools
-e2fsprogs
-fuse-libs
-gnupg2-smime
-libss # used by e2fsprogs
-pinentry
-shared-mime-info
-trousers
-xkeyboard-config
-grubby
-langpacks-en_GB
# https://bugzilla.redhat.com/show_bug.cgi?id=1951111
-util-linux
-sssd-client
%end
%post --erroronfail --log=/root/anaconda-post.log
set -eux
# Set install langs macro so that new rpms that get installed will
# only install langs that we limit it to.
LANG="en_US"
echo "%_install_langs $LANG" > /etc/rpm/macros.image-language-conf
# https://bugzilla.redhat.com/show_bug.cgi?id=1727489
echo 'LANG="C.UTF-8"' > /etc/locale.conf
# https://bugzilla.redhat.com/show_bug.cgi?id=1400682
echo "Import RPM GPG key"
releasever=$(rpm --eval '%{?fedora}')
# When building ELN containers, we don't have the %{fedora} macro
if [ -z $releasever ]; then
releasever=eln
fi
rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-$releasever-primary
echo "# fstab intentionally empty for containers" > /etc/fstab
# Remove machine-id on pre generated images
rm -f /etc/machine-id
touch /etc/machine-id
echo "# resolv placeholder" > /etc/resolv.conf
chmod 644 /etc/resolv.conf
%end

View File

@ -1,31 +0,0 @@
%packages
# Switch to groups for design suite
@design-suite
# Identify as Fedora Design Suite
fedora-release-designsuite
# Provides backup application
deja-dup
deja-dup-nautilus
# Add extra gnome applications
#gnome-books
gnome-calendar
gnome-photos
gnome-pomodoro
gnome-todo
# Add cosmetic for terminal
powerline
powerline-fonts
# removal of unneeded applications
-gnome-boxes
# temporarily removing conflicting application
-mypaint
-sparkleshare
%end

View File

@ -1,93 +0,0 @@
# fedora-disk-base.ks
#
# Defines the basics for all kickstarts in the fedora-live branch
# Does not include package selection (other then mandatory)
# Does not include localization packages or configuration
#
# Does includes "default" language configuration (kickstarts including
# this template can override these settings)
text
lang en_US.UTF-8
keyboard us
timezone US/Eastern
selinux --enforcing
firewall --enabled --service=mdns
services --enabled=sshd,NetworkManager,chronyd
network --bootproto=dhcp --device=link --activate
rootpw --lock --iscrypted locked
shutdown
bootloader --timeout=1
zerombr
clearpart --all --initlabel --disklabel=msdos
# make sure that initial-setup runs and lets us do all the configuration bits
firstboot --reconfig
%include fedora-repo.ks
%packages
@core
@standard
@hardware-support
kernel
# remove this in %post
dracut-config-generic
-dracut-config-rescue
# install tools needed to manage and boot arm systems
@arm-tools
chrony
bcm283x-firmware
initial-setup
# Intel wireless firmware assumed never of use for disk images
-iwl*
-ipw*
-usb_modeswitch
-generic-release*
# make sure all the locales are available for inital-setup and anaconda to work
glibc-all-langpacks
%end
%post
# Find the architecture we are on
arch=$(uname -m)
# Setup Raspberry Pi firmware
if [[ $arch == "aarch64" ]]; then
cp -P /usr/share/uboot/rpi_arm64/u-boot.bin /boot/efi/rpi-u-boot.bin
fi
releasever=$(rpm --eval '%{fedora}')
rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-$releasever-primary
echo "Packages within this disk image"
rpm -qa --qf '%{size}\t%{name}-%{version}-%{release}.%{arch}\n' |sort -rn
# remove random seed, the newly installed instance should make it's own
rm -f /var/lib/systemd/random-seed
# The enp1s0 interface is a left over from the imagefactory install, clean this up
rm -f /etc/NetworkManager/system-connections/*.nmconnection
dnf -y remove dracut-config-generic
# Remove machine-id on pre generated images
rm -f /etc/machine-id
touch /etc/machine-id
# Note that running rpm recreates the rpm db files which aren't needed or wanted
rm -f /var/lib/rpm/__db*
# Anaconda adds console=tty0 to the grub boot line on all images. this is problematic
# when you are using fedora via serial console as you do not get any output post grub
# linux does a good job of knowing what consoles need to be enabled.
# https://bugzilla.redhat.com/show_bug.cgi?id=2022757
if [[ $arch == "aarch64" ]]; then
sed -i -e 's|console=tty0||g' /boot/loader/entries/*conf
fi
%end

View File

@ -1,5 +0,0 @@
%include fedora-disk-base.ks
%include fedora-disk-xbase.ks
%include fedora-budgie-common.ks
autopart --type=btrfs --noswap

View File

@ -1,5 +0,0 @@
%include fedora-disk-base.ks
%include fedora-disk-xbase.ks
%include fedora-kde-common.ks
autopart --type=btrfs --noswap

View File

@ -1,5 +0,0 @@
%include fedora-disk-base.ks
%include fedora-disk-xbase.ks
%include fedora-lxqt-common.ks
autopart --type=btrfs --noswap

View File

@ -1,6 +0,0 @@
%include fedora-disk-base.ks
%include fedora-minimal-common.ks
services --enabled=sshd,NetworkManager,chronyd,initial-setup
autopart --type=plain --noswap

View File

@ -1,5 +0,0 @@
%include fedora-disk-base.ks
%include fedora-disk-xbase.ks
%include fedora-phosh-common.ks
autopart --type=btrfs --noswap

View File

@ -1,20 +0,0 @@
# Maintained by the Fedora Python SIG:
# http://fedoraproject.org/wiki/SIGs/Python
# mailto:python-devel@lists.fedoraproject.org
# The Workstion based Python Classroom Lab
%include fedora-disk-base.ks
%include fedora-disk-xbase.ks
%include fedora-workstation-common.ks
%include fedora-python-classroom-gnome-common.ks
autopart --type=btrfs --noswap
%packages
-initial-setup
-initial-setup-gui
-libvirt*
-gnome-boxes
%end

View File

@ -1,5 +0,0 @@
%include fedora-disk-base.ks
%include fedora-disk-xbase.ks
%include fedora-soas-common.ks
autopart --type=btrfs --noswap

View File

@ -1,11 +0,0 @@
%include fedora-disk-base.ks
%include fedora-disk-xbase.ks
%include fedora-workstation-common.ks
autopart --type=btrfs --noswap
%packages
-initial-setup
-initial-setup-gui
%end

View File

@ -1,22 +0,0 @@
%packages
@base-x
@fonts
@input-methods
@multimedia
@printing
-@guest-desktop-agents
initial-setup-gui
# Need aajohan-comfortaa-fonts for the SVG rnotes images
aajohan-comfortaa-fonts
# anaconda needs the locales available to run for different locales
glibc-all-langpacks
%end
%post
# Explicitly set graphical.target as default as this is how initial-setup detects which version to run
ln -sf /lib/systemd/system/graphical.target /etc/systemd/system/default.target
%end

View File

@ -1,5 +0,0 @@
%include fedora-disk-base.ks
%include fedora-disk-xbase.ks
%include fedora-xfce-common.ks
autopart --type=btrfs --noswap

View File

@ -0,0 +1,6 @@
%include fedora-docker-base.ks
bootloader --timeout=1 --append="no_timer_check console=tty1 console=ttyS0,115200n8"
part /boot --fstype="ext4" --size=500
part /boot/efi --fstype="vfat" --size=100

View File

@ -0,0 +1,5 @@
%include fedora-docker-base.ks
bootloader --timeout=1 --append="no_timer_check console=tty1 console=ttyS0,115200n8"
part prepboot --fstype="prepboot" --size=4

89
fedora-docker-base.ks Normal file
View File

@ -0,0 +1,89 @@
# This is a minimal Fedora install designed to serve as a Docker base image.
#
# To keep this image minimal it only installs English language. You need to change
# yum configuration in order to enable other languages.
#
### Hacking on this image ###
# This kickstart is processed using Anaconda-in-ImageFactory (via Koji typically),
# but you can run imagefactory locally too.
#
# To do so, testing local changes, first you'll need a TDL file. I store one here:
# https://git.fedorahosted.org/cgit/fedora-atomic.git/tree/fedora-atomic-rawhide.tdl
#
# Then, once you have imagefactory and imagefactory-plugins installed, run:
#
# imagefactory --debug target_image --template /path/to/fedora-atomic-rawhide.tdl --parameter offline_icicle true --file-parameter install_script $(pwd)/fedora-docker-base.ks docker
#
cmdline
bootloader --disabled
timezone --isUtc --nontp Etc/UTC
rootpw --lock --iscrypted locked
user --name=none
keyboard us
zerombr
clearpart --all
part / --fstype ext4 --grow
network --bootproto=dhcp --device=link --activate --onboot=on
reboot
%packages --excludedocs --instLangs=en --nocore
bash
tar # https://bugzilla.redhat.com/show_bug.cgi?id=1409920
fedora-release
rootfiles
vim-minimal
dnf
dnf-yum # https://fedorahosted.org/fesco/ticket/1312#comment:29
sssd-client
#fakesystemd #TODO: waiting for review https://bugzilla.redhat.com/show_bug.cgi?id=1118740
-kernel
%end
%post --log=/tmp/anaconda-post.log
# Set the language rpm nodocs transaction flag persistently in the
# image yum.conf and rpm macros
# remove the user anaconda forces us to make
userdel -r none
LANG="en_US"
echo "%_install_lang $LANG" > /etc/rpm/macros.image-language-conf
# Carry these configs for both dnf and yum for users who are calling
# yum-deprecated directly. This will keep the experience between both
# consistent
awk '(NF==0&&!done){print "override_install_langs='$LANG'\ntsflags=nodocs";done=1}{print}' \
< /etc/yum.conf > /etc/yum.conf.new
mv /etc/yum.conf.new /etc/yum.conf
awk '(NF==0&&!done){print "override_install_langs='$LANG'\ntsflags=nodocs";done=1}{print}' \
< /etc/dnf/dnf.conf > /etc/dnf/dnf.conf.new
mv /etc/dnf/dnf.conf.new /etc/dnf/dnf.conf
echo "Import RPM GPG key"
releasever=$(rpm -q --qf '%{version}\n' fedora-release)
basearch=$(uname -i)
rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-$releasever-$basearch
rm -f /usr/lib/locale/locale-archive
#Setup locale properly
localedef -v -c -i en_US -f UTF-8 en_US.UTF-8
rm -rf /var/cache/yum/*
rm -f /tmp/ks-script*
#Mask mount units and getty service so that we don't get login prompt
systemctl mask systemd-remount-fs.service dev-hugepages.mount sys-fs-fuse-connections.mount systemd-logind.service getty.target console-getty.service
# Fix /run/lock breakage since it's not tmpfs in docker
umount /run
systemd-tmpfiles --create --boot
rm -f /etc/machine-id
%end

View File

@ -1,60 +0,0 @@
# See fedora-container-common.ks for details on how to hack on container image kickstarts
# This base is a standard Fedora-ELN image with python3 and dnf
%include fedora-container-common.ks
%packages --excludedocs --instLangs=en --nocore --excludeWeakdeps
-fedora-release-container
fedora-release-eln
fedora-repos-eln
rootfiles
tar # https://bugzilla.redhat.com/show_bug.cgi?id=1409920
vim-minimal
dnf
dnf-yum # https://fedorahosted.org/fesco/ticket/1312#comment:29
sudo
-glibc-langpack-en
-langpacks-en
%end
%post --erroronfail --log=/root/anaconda-post.log
set -eux
# remove some extraneous files
rm -rf /var/cache/dnf/*
rm -rf /tmp/*
# https://pagure.io/atomic-wg/issue/308
printf "tsflags=nodocs\n" >>/etc/dnf/dnf.conf
# https://bugzilla.redhat.com/show_bug.cgi?id=1343138
# Fix /run/lock breakage since it's not tmpfs in docker
# This unmounts /run (tmpfs) and then recreates the files
# in the /run directory on the root filesystem of the container
#
# We ignore the return code of the systemd-tmpfiles command because
# at this point we have already removed the /etc/machine-id and all
# tmpfiles lines with %m in them will fail and cause a bad return
# code. Example failure:
# [/usr/lib/tmpfiles.d/systemd.conf:26] Failed to replace specifiers: /run/log/journal/%m
#
umount /run
rm -f /run/nologin # https://pagure.io/atomic-wg/issue/316
# Final pruning
rm -rfv /var/cache/* /var/log/* /tmp/*
%end
%post --nochroot --erroronfail --log=/mnt/sysimage/root/anaconda-post-nochroot.log
set -eux
# See: https://bugzilla.redhat.com/show_bug.cgi?id=1051816
# NOTE: run this in nochroot because "find" does not exist in chroot
KEEPLANG=en_US
for dir in locale i18n; do
find /mnt/sysimage/usr/share/${dir} -mindepth 1 -maxdepth 1 -type d -not \( -name "${KEEPLANG}" -o -name POSIX \) -exec rm -rfv {} +
done
%end

View File

@ -1,238 +0,0 @@
# Kickstart file to build Fedora ELN Guest image.
# This image is used to test Fedora ELN content for
# the cloud instances. This image provides minimally configured
# system image.
text
lang en_US.UTF-8
keyboard us
timezone --utc America/New_York
# add console and reorder in %post
bootloader --timeout=1 --location=mbr --append="console=ttyS0,115200n8 no_timer_check crashkernel=auto net.ifnames=0"
selinux --enforcing
firewall --enabled --service=ssh
network --bootproto=dhcp --device=link --activate --onboot=on
#services --enabled=sshd,ovirt-guest-agent --disabled kdump,rhsmcertd
services --enabled=sshd,NetworkManager,cloud-init,cloud-init-local,cloud-config,cloud-final --disabled kdump,rhsmcertd
rootpw --iscrypted nope
#
# Partition Information. Change this as necessary
# This information is used by appliance-tools but
# not by the livecd tools.
#
zerombr
clearpart --all --initlabel
# autopart --type=plain --nohome # --nohome doesn't work because of rhbz#1509350
# autopart is problematic in that it creates /boot and swap partitions rhbz#1542510 rhbz#1673094
reqpart
part / --fstype="xfs" --ondisk=vda --size=8000
reboot
# Packages
%packages
@core
dnf
kernel
yum
nfs-utils
dnf-utils
# pull firmware packages out
-aic94xx-firmware
-alsa-firmware
-alsa-lib
-alsa-tools-firmware
-ivtv-firmware
-iwl1000-firmware
-iwl100-firmware
-iwl105-firmware
-iwl135-firmware
-iwl2000-firmware
-iwl2030-firmware
-iwl3160-firmware
-iwl3945-firmware
-iwl4965-firmware
-iwl5000-firmware
-iwl5150-firmware
-iwl6000-firmware
-iwl6000g2a-firmware
-iwl6000g2b-firmware
-iwl6050-firmware
-iwl7260-firmware
-libertas-sd8686-firmware
-libertas-sd8787-firmware
-libertas-usb8388-firmware
# cloud-init does magical things with EC2 metadata, including provisioning
# a user account with ssh keys.
cloud-init
## Adding a dependency for cloud-init as recommended by tdawson
python3-jsonschema
# rhevm guest-agent (Not available in ELN yet)
#rhevm-guest-agent-common
# allows the host machine to issue commands to the guest operating system
qemu-guest-agent
# need this for growpart, because parted doesn't yet support resizepart
# https://bugzilla.redhat.com/show_bug.cgi?id=966993
#cloud-utils
#heat-cfntools # Not available in ELN (yet?)
cloud-utils-growpart
# We need this image to be portable; also, rescue mode isn't useful here.
dracut-config-generic
# Don't include dracut-config-rescue. It will have dracut generate a
# "rescue" entry in the grub menu, but that also means there is a
# rescue kernel and initramfs that get created, which (currently) add
# about another 40MiB to the /boot/ partition. Also the "rescue" mode
# is generally not useful in the cloud.
-dracut-config-rescue
# Needed initially, but removed below.
firewalld
# cherry-pick a few things from @base
tar
tcpdump
rsync
# Some things from @core we can do without in a minimal install
-biosdevname
-plymouth
-iprutils
# Minimal Cockpit web console
cockpit-ws
cockpit-system
subscription-manager-cockpit
# rh-amazon-rhui-client
# Exclude all langpacks for now
-langpacks-*
# We are building Fedora-ELN
fedora-release-eln
fedora-repos-eln
# Add rng-tools as source of entropy
rng-tools
%end
#
# Add custom post scripts after the base post.
#
%post --erroronfail
# workaround anaconda requirements
passwd -d root
passwd -l root
# setup systemd to boot to the right runlevel
echo -n "Setting default runlevel to multiuser text mode"
rm -f /etc/systemd/system/default.target
ln -s /lib/systemd/system/multi-user.target /etc/systemd/system/default.target
echo .
# this is installed by default but we don't need it in virt
echo "Removing linux-firmware package."
dnf -C -y remove linux-firmware
# Remove firewalld; it is required to be present for install/image building.
echo "Removing firewalld."
dnf -C -y remove firewalld --setopt="clean_requirements_on_remove=1"
echo -n "Getty fixes"
# although we want console output going to the serial console, we don't
# actually have the opportunity to login there. FIX.
# we don't really need to auto-spawn _any_ gettys.
sed -i '/^#NAutoVTs=.*/ a\
NAutoVTs=0' /etc/systemd/logind.conf
# For cloud images, 'eth0' _is_ the predictable device name, since
# we don't want to be tied to specific virtual (!) hardware
rm -f /etc/udev/rules.d/70*
ln -s /dev/null /etc/udev/rules.d/80-net-name-slot.rules
rm -f /etc/NetworkManager/system-connections/*.nmconnection
# simple eth0 config, again not hard-coded to the build hardware
cat > /etc/sysconfig/network-scripts/ifcfg-eth0 << EOF
DEVICE="eth0"
BOOTPROTO="dhcp"
BOOTPROTOv6="dhcp"
ONBOOT="yes"
TYPE="Ethernet"
USERCTL="yes"
PEERDNS="yes"
IPV6INIT="yes"
PERSISTENT_DHCLIENT="1"
EOF
# set virtual-guest as default profile for tuned
echo "virtual-guest" > /etc/tuned/active_profile
# generic localhost names
cat > /etc/hosts << EOF
127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4
::1 localhost localhost.localdomain localhost6 localhost6.localdomain6
EOF
echo .
cat <<EOL > /etc/sysconfig/kernel
# UPDATEDEFAULT specifies if new-kernel-pkg should make
# new kernels the default
UPDATEDEFAULT=yes
# DEFAULTKERNEL specifies the default kernel package type
DEFAULTKERNEL=kernel
EOL
# make sure firstboot doesn't start
echo "RUN_FIRSTBOOT=NO" > /etc/sysconfig/firstboot
# workaround https://bugzilla.redhat.com/show_bug.cgi?id=966888
if ! grep -q growpart /etc/cloud/cloud.cfg; then
sed -i 's/ - resizefs/ - growpart\n - resizefs/' /etc/cloud/cloud.cfg
fi
# allow sudo powers to cloud-user
echo -e 'cloud-user\tALL=(ALL)\tNOPASSWD: ALL' >> /etc/sudoers
# Disable subscription-manager yum plugins
sed -i 's|^enabled=1|enabled=0|' /etc/yum/pluginconf.d/product-id.conf
sed -i 's|^enabled=1|enabled=0|' /etc/yum/pluginconf.d/subscription-manager.conf
echo "Cleaning old yum repodata."
dnf clean all
# clean up installation logs"
rm -rf /var/log/yum.log
rm -rf /var/lib/yum/*
rm -rf /root/install.log
rm -rf /root/install.log.syslog
rm -rf /root/anaconda-ks.cfg
rm -rf /var/log/anaconda*
echo "Fixing SELinux contexts."
touch /var/log/cron
touch /var/log/boot.log
mkdir -p /var/cache/yum
/usr/sbin/fixfiles -R -a restore
# remove random-seed so it's not the same every time
rm -f /var/lib/systemd/random-seed
# Remove machine-id on the pre generated images
cat /dev/null > /etc/machine-id
# Anaconda is writing to /etc/resolv.conf from the generating environment.
# The system should start out with an empty file.
truncate -s 0 /etc/resolv.conf
%end

View File

@ -1,35 +0,0 @@
# fedora-livecd-i3.ks
#
# Description:
# - Fedora Live Spin with the tiling window manager i3wm
#
# Maintainer(s):
# - Nasir Hussain <nasirhm@fedoraproject.org>
# - Eduard Lucena <x3mboy@fedoraproject.org>
# - Justin W. Flory <jwf@fedoraproject.org>
# - Dan Cermak <defolos@fedoraproject.org>
%packages
@^i3-desktop-environment
feh
dex-autostart
thunar
# unlock default keyring. FIXME: Should probably be done in comps
gnome-keyring-pam
# Admin tools are handy to have
@admin-tools
wget
# Better more popular browser
system-config-printer
# save some space
-autofs
-acpid
-gimp-help
-desktop-backgrounds-basic
-aspell-* # dictionaries are big
%end

View File

@ -1,88 +0,0 @@
# This is the kickstart for Fedora IoT disk images.
text # don't use cmdline -- https://github.com/rhinstaller/anaconda/issues/931
lang en_US.UTF-8
keyboard us
timezone --utc Etc/UTC
selinux --enforcing
rootpw --lock --iscrypted locked
bootloader --timeout=1 --append="modprobe.blacklist=vc4"
network --bootproto=dhcp --device=link --activate --onboot=on
services --enabled=NetworkManager,sshd
zerombr
clearpart --all --initlabel --disklabel=msdos
autopart --nohome --noswap --type=plain
# Equivalent of %include fedora-repo.ks
# Pull from the ostree repo that was created during the compose
ostreesetup --nogpg --osname=fedora-iot --remote=fedora-iot --url=https://kojipkgs.fedoraproject.org/compose/iot/repo/ --ref=fedora/rawhide/${basearch}/iot
reboot
%post --erroronfail
# Find the architecture we are on
arch=$(uname -m)
# Setup Raspberry Pi firmware
if [[ $arch == "aarch64" ]]; then
cp -P /usr/share/uboot/rpi_arm64/u-boot.bin /boot/efi/rpi-u-boot.bin
fi
# Set the origin to the "main ref", distinct from /updates/ which is where bodhi writes.
# We want consumers of this image to track the two week releases.
ostree admin set-origin --index 0 fedora-iot https://dl.fedoraproject.org/iot/repo/ "fedora/rawhide/${arch}/iot"
# Make sure the ref we're supposedly sitting on (according
# to the updated origin) exists.
ostree refs "fedora-iot:fedora/rawhide/${arch}/iot" --create "fedora-iot:fedora/rawhide/${arch}/iot"
# Remove the old ref so that the commit eventually gets cleaned up.
ostree refs "fedora-iot:fedora/rawhide/${arch}/iot" --delete
# delete/add the remote with new options to enable gpg verification
# and to point them at the cdn url
ostree remote delete fedora-iot
ostree remote add --set=gpg-verify=true --set=gpgkeypath=/etc/pki/rpm-gpg/ --set=contenturl=mirrorlist=https://ostree.fedoraproject.org/iot/mirrorlist fedora-iot 'https://ostree.fedoraproject.org/iot'
# We're getting a stray console= from somewhere, work around it
rpm-ostree kargs --delete=console=tty0
# older versions of livecd-tools do not follow "rootpw --lock" line above
# https://bugzilla.redhat.com/show_bug.cgi?id=964299
passwd -l root
# Work around https://bugzilla.redhat.com/show_bug.cgi?id=1193590
cp /etc/skel/.bash* /var/roothome
# Remove any persistent NIC rules generated by udev
rm -vf /etc/udev/rules.d/*persistent-net*.rules
echo "Removing random-seed so it's not the same in every image."
rm -f /var/lib/systemd/random-seed
echo "Packages within this iot image:"
echo "-----------------------------------------------------------------------"
rpm -qa --qf '%{size}\t%{name}-%{version}-%{release}.%{arch}\n' |sort -rn
echo "-----------------------------------------------------------------------"
# Note that running rpm recreates the rpm db files which aren't needed/wanted
rm -f /var/lib/rpm/__db*
echo "Zeroing out empty space."
# This forces the filesystem to reclaim space from deleted files
dd bs=1M if=/dev/zero of=/var/tmp/zeros || :
rm -f /var/tmp/zeros
echo "(Don't worry -- that out-of-space error was expected.)"
rm -f /etc/NetworkManager/system-connections/*.nmconnection
# Anaconda is writing an /etc/resolv.conf from the install environment.
# The system should start out with an empty file, otherwise cloud-init
# will try to use this information and may error:
# https://bugs.launchpad.net/cloud-init/+bug/1670052
truncate -s 0 /etc/resolv.conf
%end

View File

@ -1,42 +0,0 @@
%packages
# install env-group to resolve RhBug:1891500
@^kde-desktop-environment
@firefox
@kde-apps
@kde-media
@libreoffice
# add libreoffice-draw and libreoffice-math (pagureio:fedora-kde/SIG#103)
libreoffice-draw
libreoffice-math
fedora-release-kde
-@admin-tools
# drop tracker stuff pulled in by gtk3 (pagureio:fedora-kde/SIG#124)
-tracker-miners
-tracker
### The KDE-Desktop
### fixes
# minimal localization support - allows installing the kde-l10n-* packages
kde-l10n
# Additional packages that are not default in kde-* groups, but useful
fuse
mediawriter
### space issues
-ktorrent # kget has also basic torrent features (~3 megs)
-digikam # digikam has duplicate functionality with gwenview (~28 megs)
-kipi-plugins # ~8 megs + drags in Marble
-krusader # ~4 megs
-k3b # ~15 megs
## avoid serious bugs by omitting broken stuff
%end

29
fedora-kde-packages.ks Normal file
View File

@ -0,0 +1,29 @@
%packages
@firefox
@kde-apps
@kde-desktop
@kde-media
@kde-office
@kde-telepathy
@networkmanager-submodules
### The KDE-Desktop
### Browser
qupzilla
### fixes
# use kde-print-manager instead of system-config-printer
-system-config-printer
# make sure mariadb lands instead of MySQL (hopefully a temporary hack)
mariadb-embedded
mariadb-libs
mariadb-server
# minimal localization support - allows installing the kde-l10n-* packages
system-config-language
kde-l10n
%end

View File

@ -14,43 +14,41 @@
# Maintainer: Christian Dersch <lupinix@fedoraproject.org>
# https://fedoraproject.org/wiki/User:Lupinix
%include fedora-live-kde-base.ks
%include fedora-live-minimization.ks
%include fedora-live-kde.ks
# The recommended part size for DVDs is too close to use for the astronomy spin
part / --size 16000
part / --size 14500
%packages
# Installing the default/mandatory packages from engineering & scientific
@engineering-and-scientific
# Basic development
@development-tools
@c-development
# astronomical data analysis
astrometry
astrometry-tycho2
cdsclient
fpack
gcx
psfex
saoimage
scamp
sextractor
#siril
siril
skyviewer
swarp
wcstools
# Observatory: KStars + INDI drivers
indi-3rdparty-drivers
# Observatory: KStars + INDI drivers + Skychart
indi-aagcloudwatcher
indi-apogee
indi-eqmod
indi-gphoto
indi-sx
indistarter
kstars
stellarium
# misc. astronomy
#celestia
stellarium
#virtualplanet
celestia
virtualplanet
# Some astro environment stuff
astronomy-menus
@ -68,29 +66,20 @@ python3-ipython-notebook
python3-sympy
python3-networkx
python3-pandas
python3-pillow
python3-seaborn
python3-statsmodels
python3-scikit-learn
python3-scikit-image
# Python 3 astronomy
astropy-tools
ginga
python3-astropy
python3-astroML
python3-astroML-addons
python3-astroquery
python3-astroscrappy
python3-APLpy
python3-ATpy
python3-ccdproc
python3-fitsio
python3-gatspy
python3-photutils
python3-pyvo
python3-reproject
python3-sep
# matplotlib backends
python3-matplotlib-qt4
python3-matplotlib-qt5
python3-matplotlib-tk
@ -98,11 +87,10 @@ python3-matplotlib-tk
# Python IDE very useful for scientific use
python3-spyder
# BOINC for distributed computing
boinc-client
boinc-manager
#Version control- a GUI for each as well
# Installing rapidsvn will also install subversion package
rapidsvn
git
git-gui
@ -112,18 +100,17 @@ gimp
kst
kst-docs
kst-fits
# LabPlot currently not installable due to #2044284
#LabPlot
LabPlot
#Misc. Utils
# icedtea-web to have webstart useful for VO tools
icedtea-web
ImageMagick
kate
kate-plugins
rlwrap
screen
# Java JRE for VO tools
java
plasma-applet-redshift-control
# Omit KDE 4 translations for now: https://bugzilla.redhat.com/show_bug.cgi?id=1197940
-kde-l10n-*

View File

@ -10,53 +10,277 @@
lang en_US.UTF-8
keyboard us
timezone US/Eastern
auth --useshadow --passalgo=sha512
selinux --enforcing
firewall --enabled --service=mdns
xconfig --startxonboot
zerombr
clearpart --all
part / --size 5120 --fstype ext4
services --enabled=NetworkManager,ModemManager --disabled=sshd
services --enabled=NetworkManager,ModemManager --disabled=network,sshd
network --bootproto=dhcp --device=link --activate
rootpw --lock --iscrypted locked
shutdown
%include fedora-repo.ks
%packages
@base-x
@guest-desktop-agents
@standard
@core
@fonts
@input-methods
@dial-up
@multimedia
@hardware-support
@printing
# Explicitly specified here:
# <notting> walters: because otherwise dependency loops cause yum issues.
kernel
kernel-modules
kernel-modules-extra
# This was added a while ago, I think it falls into the category of
# "Diagnosis/recovery tool useful from a Live OS image". Leaving this untouched
# for now.
memtest86+
# The point of a live image is to install
anaconda
anaconda-install-env-deps
anaconda-live
@anaconda-tools
# Anaconda has a weak dep on this and we don't want it on livecds, see
# https://fedoraproject.org/wiki/Changes/RemoveDeviceMapperMultipathFromWorkstationLiveCD
-fcoe-utils
-device-mapper-multipath
# Need aajohan-comfortaa-fonts for the SVG rnotes images
aajohan-comfortaa-fonts
# Without this, initramfs generation during live image creation fails: #1242586
dracut-live
grub2-efi
syslinux
# anaconda needs the locales available to run for different locales
glibc-all-langpacks
# provide the livesys scripts
livesys-scripts
%end
%post
# Enable livesys services
systemctl enable livesys.service
systemctl enable livesys-late.service
# FIXME: it'd be better to get this installed from a package
cat > /etc/rc.d/init.d/livesys << EOF
#!/bin/bash
#
# live: Init script for live image
#
# chkconfig: 345 00 99
# description: Init script for live image.
### BEGIN INIT INFO
# X-Start-Before: display-manager chronyd
### END INIT INFO
. /etc/init.d/functions
if ! strstr "\`cat /proc/cmdline\`" rd.live.image || [ "\$1" != "start" ]; then
exit 0
fi
if [ -e /.liveimg-configured ] ; then
configdone=1
fi
exists() {
which \$1 >/dev/null 2>&1 || return
\$*
}
livedir="LiveOS"
for arg in \`cat /proc/cmdline\` ; do
if [ "\${arg##rd.live.dir=}" != "\${arg}" ]; then
livedir=\${arg##rd.live.dir=}
return
fi
if [ "\${arg##live_dir=}" != "\${arg}" ]; then
livedir=\${arg##live_dir=}
return
fi
done
# enable swaps unless requested otherwise
swaps=\`blkid -t TYPE=swap -o device\`
if ! strstr "\`cat /proc/cmdline\`" noswap && [ -n "\$swaps" ] ; then
for s in \$swaps ; do
action "Enabling swap partition \$s" swapon \$s
done
fi
if ! strstr "\`cat /proc/cmdline\`" noswap && [ -f /run/initramfs/live/\${livedir}/swap.img ] ; then
action "Enabling swap file" swapon /run/initramfs/live/\${livedir}/swap.img
fi
mountPersistentHome() {
# support label/uuid
if [ "\${homedev##LABEL=}" != "\${homedev}" -o "\${homedev##UUID=}" != "\${homedev}" ]; then
homedev=\`/sbin/blkid -o device -t "\$homedev"\`
fi
# if we're given a file rather than a blockdev, loopback it
if [ "\${homedev##mtd}" != "\${homedev}" ]; then
# mtd devs don't have a block device but get magic-mounted with -t jffs2
mountopts="-t jffs2"
elif [ ! -b "\$homedev" ]; then
loopdev=\`losetup -f\`
if [ "\${homedev##/run/initramfs/live}" != "\${homedev}" ]; then
action "Remounting live store r/w" mount -o remount,rw /run/initramfs/live
fi
losetup \$loopdev \$homedev
homedev=\$loopdev
fi
# if it's encrypted, we need to unlock it
if [ "\$(/sbin/blkid -s TYPE -o value \$homedev 2>/dev/null)" = "crypto_LUKS" ]; then
echo
echo "Setting up encrypted /home device"
plymouth ask-for-password --command="cryptsetup luksOpen \$homedev EncHome"
homedev=/dev/mapper/EncHome
fi
# and finally do the mount
mount \$mountopts \$homedev /home
# if we have /home under what's passed for persistent home, then
# we should make that the real /home. useful for mtd device on olpc
if [ -d /home/home ]; then mount --bind /home/home /home ; fi
[ -x /sbin/restorecon ] && /sbin/restorecon /home
if [ -d /home/liveuser ]; then USERADDARGS="-M" ; fi
}
findPersistentHome() {
for arg in \`cat /proc/cmdline\` ; do
if [ "\${arg##persistenthome=}" != "\${arg}" ]; then
homedev=\${arg##persistenthome=}
return
fi
done
}
if strstr "\`cat /proc/cmdline\`" persistenthome= ; then
findPersistentHome
elif [ -e /run/initramfs/live/\${livedir}/home.img ]; then
homedev=/run/initramfs/live/\${livedir}/home.img
fi
# if we have a persistent /home, then we want to go ahead and mount it
if ! strstr "\`cat /proc/cmdline\`" nopersistenthome && [ -n "\$homedev" ] ; then
action "Mounting persistent /home" mountPersistentHome
fi
if [ -n "\$configdone" ]; then
exit 0
fi
# add fedora user with no passwd
action "Adding live user" useradd \$USERADDARGS -c "Live System User" liveuser
passwd -d liveuser > /dev/null
usermod -aG wheel liveuser > /dev/null
# Remove root password lock
passwd -d root > /dev/null
# turn off firstboot for livecd boots
systemctl --no-reload disable firstboot-text.service 2> /dev/null || :
systemctl --no-reload disable firstboot-graphical.service 2> /dev/null || :
systemctl stop firstboot-text.service 2> /dev/null || :
systemctl stop firstboot-graphical.service 2> /dev/null || :
# don't use prelink on a running live image
sed -i 's/PRELINKING=yes/PRELINKING=no/' /etc/sysconfig/prelink &>/dev/null || :
# turn off mdmonitor by default
systemctl --no-reload disable mdmonitor.service 2> /dev/null || :
systemctl --no-reload disable mdmonitor-takeover.service 2> /dev/null || :
systemctl stop mdmonitor.service 2> /dev/null || :
systemctl stop mdmonitor-takeover.service 2> /dev/null || :
# don't enable the gnome-settings-daemon packagekit plugin
gsettings set org.gnome.software download-updates 'false' || :
# don't start cron/at as they tend to spawn things which are
# disk intensive that are painful on a live image
systemctl --no-reload disable crond.service 2> /dev/null || :
systemctl --no-reload disable atd.service 2> /dev/null || :
systemctl stop crond.service 2> /dev/null || :
systemctl stop atd.service 2> /dev/null || :
# Don't sync the system clock when running live (RHBZ #1018162)
sed -i 's/rtcsync//' /etc/chrony.conf
# Mark things as configured
touch /.liveimg-configured
# add static hostname to work around xauth bug
# https://bugzilla.redhat.com/show_bug.cgi?id=679486
echo "localhost" > /etc/hostname
EOF
# bah, hal starts way too late
cat > /etc/rc.d/init.d/livesys-late << EOF
#!/bin/bash
#
# live: Late init script for live image
#
# chkconfig: 345 99 01
# description: Late init script for live image.
. /etc/init.d/functions
if ! strstr "\`cat /proc/cmdline\`" rd.live.image || [ "\$1" != "start" ] || [ -e /.liveimg-late-configured ] ; then
exit 0
fi
exists() {
which \$1 >/dev/null 2>&1 || return
\$*
}
touch /.liveimg-late-configured
# read some variables out of /proc/cmdline
for o in \`cat /proc/cmdline\` ; do
case \$o in
ks=*)
ks="--kickstart=\${o#ks=}"
;;
xdriver=*)
xdriver="\${o#xdriver=}"
;;
esac
done
# if liveinst or textinst is given, start anaconda
if strstr "\`cat /proc/cmdline\`" liveinst ; then
plymouth --quit
/usr/sbin/liveinst \$ks
fi
if strstr "\`cat /proc/cmdline\`" textinst ; then
plymouth --quit
/usr/sbin/liveinst --text \$ks
fi
# configure X, allowing user to override xdriver
if [ -n "\$xdriver" ]; then
cat > /etc/X11/xorg.conf.d/00-xdriver.conf <<FOE
Section "Device"
Identifier "Videocard0"
Driver "\$xdriver"
EndSection
FOE
fi
EOF
chmod 755 /etc/rc.d/init.d/livesys
/sbin/restorecon /etc/rc.d/init.d/livesys
/sbin/chkconfig --add livesys
chmod 755 /etc/rc.d/init.d/livesys-late
/sbin/restorecon /etc/rc.d/init.d/livesys-late
/sbin/chkconfig --add livesys-late
# enable tmpfs for /tmp
systemctl enable tmp.mount
@ -70,8 +294,11 @@ EOF
# work around for poor key import UI in PackageKit
rm -f /var/lib/rpm/__db*
releasever=$(rpm -q --qf '%{version}\n' --whatprovides system-release)
basearch=$(uname -i)
rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-$releasever-$basearch
echo "Packages within this LiveCD"
rpm -qa --qf '%{size}\t%{name}-%{version}-%{release}.%{arch}\n' |sort -rn
rpm -qa
# Note that running rpm recreates the rpm db files which aren't needed or wanted
rm -f /var/lib/rpm/__db*
@ -94,13 +321,15 @@ echo 'File created by kickstart. See systemd-update-done.service(8).' \
# See bug 1317709
rm -f /boot/*-rescue*
# Disable network service here, as doing it in the services line
# fails due to RHBZ #1369794
systemctl disable network
# Remove machine-id on pre generated images
rm -f /etc/machine-id
touch /etc/machine-id
%end
%post --nochroot
cp $INSTALL_ROOT/usr/share/licenses/*-release/* $LIVE_ROOT/
# only works on x86, x86_64
if [ "$(uname -i)" = "i386" -o "$(uname -i)" = "x86_64" ]; then
if [ ! -d $LIVE_ROOT/LiveOS ]; then mkdir -p $LIVE_ROOT/LiveOS ; fi
cp /usr/bin/livecd-iso-to-disk $LIVE_ROOT/LiveOS
fi
%end

View File

@ -1,17 +0,0 @@
# Description:
# - Fedora Live Spin with the Budgie Desktop Environment
#
# Maintainer(s):
# - Joshua Strobl <joshua@buddiesofbudgie.org>
%include fedora-live-base.ks
%include fedora-budgie-common.ks
part / --size 7750
%post
# set livesys session type
sed -i 's/^livesys_session=.*/livesys_session="budgie"/' /etc/sysconfig/livesys
%end

View File

@ -7,9 +7,10 @@
# - Dan Book <grinnz@grinnz.com>
%include fedora-live-base.ks
%include fedora-cinnamon-common.ks
%include fedora-live-minimization.ks
%include fedora-cinnamon-packages.ks
part / --size=8192
part / --size=6144
%post
# cinnamon configuration
@ -21,8 +22,29 @@ PREFERRED=/usr/bin/cinnamon-session
DISPLAYMANAGER=/usr/sbin/lightdm
EOF
# set livesys session type
sed -i 's/^livesys_session=.*/livesys_session="cinnamon"/' /etc/sysconfig/livesys
cat >> /etc/rc.d/init.d/livesys << EOF
# set up lightdm autologin
sed -i 's/^#autologin-user=.*/autologin-user=liveuser/' /etc/lightdm/lightdm.conf
sed -i 's/^#autologin-user-timeout=.*/autologin-user-timeout=0/' /etc/lightdm/lightdm.conf
#sed -i 's/^#show-language-selector=.*/show-language-selector=true/' /etc/lightdm/lightdm-gtk-greeter.conf
# set Cinnamon as default session, otherwise login will fail
sed -i 's/^#user-session=.*/user-session=cinnamon/' /etc/lightdm/lightdm.conf
# Show harddisk install on the desktop
sed -i -e 's/NoDisplay=true/NoDisplay=false/' /usr/share/applications/liveinst.desktop
mkdir /home/liveuser/Desktop
cp /usr/share/applications/liveinst.desktop /home/liveuser/Desktop
# and mark it as executable
chmod +x /home/liveuser/Desktop/liveinst.desktop
# this goes at the end after all other changes.
chown -R liveuser:liveuser /home/liveuser
restorecon -R /home/liveuser
EOF
%end

View File

@ -1,12 +0,0 @@
# Description: The Workstation based NeuroFedora computational neuroscience lab image.
# https://fedoraproject.org/wiki/Changes/Comp_Neuro_Lab
#
# Maintained by the NeuroFedora SIG:
# https://neuro.fedoraproject.org
# mailto:neuro-sig@lists.fedoraproject.org
%include fedora-live-workstation.ks
%include fedora-comp-neuro-common.ks
%include fedora-neuro-gnome-common.ks
part / --size 10240

View File

@ -1,17 +1,47 @@
# fedora-design-suite.ks
# Based on Live Workstation
# A collection of applications for professional visual designers
# http://fedoraproject.org/wiki/Design_Suite
# Maintained by Luya Tshimbalanga <luya AT fedoraproject DOT org>
# Credit to Sebastian Dziallas for initiating the project
# Description:
# - A Spin targeted towards professional designers
# Website: http://fedoraproject.org/wiki/Design_Suite
# Maintainers:
# - Luya Tshimbalanga <luya AT fedoraproject DOT org>
# - Previous maintainer Sebastian Dziallas
%include fedora-live-workstation.ks
%include fedora-design-suite-common.ks
# Size partition
part / --size 14336
%packages
# Switch to groups for design suite
@design-suite
# Preview Gnome Photos
gnome-photos
# Add gthumb for renaming group files
gthumb
# Extra wallpapers
f23-backgrounds-extras-base
f23-backgrounds-extras-gnome
f24-backgrounds-extras-base
f24-backgrounds-extras-gnome
# removal of unneeded applications
-gnome-boxes
-eog
-rdesktop
%end
%post
#Override the favorite desktop application in Dash
cat >> /usr/share/glib-2.0/schemas/org.gnome.shell.gschema.override << FOE
[org.gnome.shell]
favorite-apps=['firefox.desktop', 'gnome-photos.desktop', 'gimp.desktop', 'inkscape.desktop', 'blender.desktop', 'libreoffice-writer.desktop', 'scribus.desktop', 'nautilus.desktop', 'bijiben.desktop', 'anaconda.desktop', 'list-design-tutorials.desktop']
FOE
# Add link to lists of tutorials
cat >> /usr/share/applications/list-design-tutorials.desktop << FOE
[Desktop Entry]
@ -51,22 +81,6 @@ Categories=Documentation;
FOE
chmod a+x /usr/share/applications/fedora-design-team.desktop
# Use Powerline in bash
cat >> $HOME/.bashrc << FOE
# Enable powerline daemon
if [ -f `which powerline-daemon` ]; then
powerline-daemon -q
POWERLINE_BASH_CONTINUATION=1
POWERLINE_BASH_SELECT=1
. /usr/share/powerline/bash/powerline.sh
fi
FOE
cat >> /var/lib/livesys/livesys-session-extra << FOE
#Override the favorite desktop application in Dash
sed -i "s/favorite-apps=."'*'"/favorite-apps=['firefox.desktop', 'shotwell.desktop', 'gimp.desktop', 'darktable.desktop','krita.desktop', 'inkscape.desktop', 'blender.desktop', 'libreoffice-writer.desktop', 'scribus.desktop', 'pitivi.desktop', 'nautilus.desktop', 'bijiben.desktop', 'anaconda.desktop', 'list-design-tutorials.desktop']/" /usr/share/glib-2.0/schemas/org.gnome.shell.gschema.override
FOE
# rebuild schema cache with any overrides we installed
glib-compile-schemas /usr/share/glib-2.0/schemas

View File

@ -1,19 +1,8 @@
# fedora-live-games.ks
# fedora-livedvd-games.ks
#
# Maintainers:
# - Darryl T. Agostinelli <dagostinelli@gmail.com>
# https://fedoraproject.org/wiki/User:Dagostinelli
#
# - Richard Anaya <richard.anaya@gmail.com>
# https://fedoraproject.org/wiki/User:Richardanaya
#
# Former Maintainers:
# Maintainer(s):
# - Bruno Wolff III <bruno@wolff.to>
# https://fedoraproject.org/wiki/User:Bruno
#
# - Rahul Sundaram <sundaram@fedoraproject.org>
# https://fedoraproject.org/wiki/User:Sundaram
#
# - Formerly maintained by Rahul Sundaram
%include fedora-live-xfce.ks
@ -48,6 +37,7 @@ asc-music
astromenace
# beneath-a-steel-sky-cd scummvm games cut for size
boswars
btanks
bzflag
crossfire-client
extremetuxracer
@ -55,27 +45,28 @@ extremetuxracer
freeciv
freecol
freedoom
freedroidrpg
# freedroidrpg cut for size
frozen-bubble
# glob2 - currently broken
gl-117
glob2
lincity-ng
#tmw - currently broken
#maniadrive - currently broken
#maniadrive-music - has been retired
tmw
maniadrive
maniadrive-music
megaglest
nethack-vultures
netpanzer
neverball
#neverball #cut for size
nogravity
#pinball # Would pull in fluid-soundfont-lite-patches
scorched3d
# supertux # Crashing
supertuxkart
supertux
#supertuxkart #remove for size
ultimatestunts
warzone2100
wesnoth
# worminator # Would pull in fluid-soundfont-lite-patches
warmux
# warmux - Cut for size
xmoto
# traditional (small)
@ -93,11 +84,12 @@ glaxium
gnubg
gnugo
haxima
#hedgewars -- broken
hedgewars
kcheckers
knights
lbrickbuster2
# liquidwar # Would pull in fluid-soundfont-lite-patches
londonlaw
lordsawar
# lure scummvm games cut for size
# machineball # Would pull in fluid-soundfont-lite-patches
@ -107,8 +99,9 @@ pachi
pioneers
quarry
# Ri-li cut for size
# rogue # recently abandoned. Someone picked it up. Waiting for approval.
rogue
# scorchwentbonkers # Would pull in fluid-soundfont-lite-patches
seahorse-adventures
solarwolf
sopwith
stormbaancoureur
@ -120,6 +113,7 @@ xblast
auriferous
alienblaster
# duel3 # Would pull in fluid-soundfont-lite-patches
lmarbles
powermanga
# raidem # Would pull in fluid-soundfont-lite-patches
# raidem-music # Would pull in fluid-soundfont-lite-patches
@ -136,6 +130,7 @@ KoboDeluxe
Maelstrom
methane
njam
seahorse-adventures
shippy
tecnoballz
wordwarvi
@ -152,12 +147,14 @@ gweled
# puzzles (big)
enigma
# fillets-ng # broken in f34
fillets-ng
pingus
# puzzles (small)
escape
# gbrainy Removed for space - only game that pulls in mono
magicor
mirrormagic
pipenightdreams
pipepanic
@ -167,11 +164,15 @@ vodovod
# card games
#poker2d - dropped from F14 for being orphaned
PySolFC
# educational/simulation
#celestia - not currently building
bygfoot
celestia
childsplay
gcompris
planets
tuxpaint
tuxpaint-stamps
@ -180,13 +181,16 @@ tuxtype2
# kde based games
taxipilot
# compilations (we are avoiding compilations, rare exceptions)
bsd-games
# utilities
games-menus
# Note some stuff I don't want pulled into the games spin.
# No compilations of games as I want to only include games that at least
# someone thought were good within a genre.
-kdegames
# Nothing should be downloading data to play.
-autodownloader

View File

@ -1,30 +0,0 @@
# fedora-livecd-i3.ks
#
# Description:
# - Fedora Live Spin with the tiling window manager i3
#
# Maintainer(s):
# - Nasir Hussain <nasirhm@fedoraproject.org>
# - Eduard Lucena <x3mboy@fedoraproject.org>
# - Dan Cermak <defolos@tummy.com>
# - Justin W. Flory <jwf@fedoraproject.org>
%include fedora-live-base.ks
%include fedora-live-minimization.ks
%include fedora-i3-common.ks
%post
# i3 configuration
# create /etc/sysconfig/desktop (needed for installation)
cat > /etc/sysconfig/desktop <<EOF
PREFERRED=/usr/bin/i3
DISPLAYMANAGER=/usr/sbin/lightdm
EOF
# set livesys session type
sed -i 's/^livesys_session=.*/livesys_session="i3"/' /etc/sysconfig/livesys
%end

View File

@ -7,7 +7,9 @@
# Web: https://fedoraproject.org/wiki/Fedora_jam
# Web: insert spinspacke when created
# Maintainer: JT Pennington (q5sys) <jt@obs-sec.com>
# Maintainer: Jørn Lomax <northlomax@gmail.com>
# https://fedoraproject.org/wiki/User:jvlomax
# Brendan Jones <brendan.jones.it@gmail.com>
%include fedora-live-kde.ks
@ -18,10 +20,124 @@ part / --size 10240 --fstype ext4
bootloader --append="threadirqs"
%packages
@audio
#pipewire
pipewire
#alsa
alsa-firmware
alsa-tools
alsa-utils
alsamixergui
alsa-plugins-jack
alsa-plugins-pulseaudio
alsa-plugins-usbstream
alsa-plugins-samplerate
alsa-plugins-upmix
alsa-plugins-vdownmix
a2jmidid
aj-snapshot
#jack
jack-audio-connection-kit
jack-audio-connection-kit-dbus
qjackctl
jackctlmmc
ffado
#pulse
pulseaudio-module-jack
pavucontrol
#midi
qsynth
fluidsynth
fluid-soundfont-gm
fluidsynth-dssi
timidity++
qmidiarp
vmpk
harmonyseq
#synthesis
hydrogen
bristol
monobristol
zynaddsubfx
yoshimi
swami
Add64
synthv1
samplv1
drumkv1
ams
#guitar
rakarrack
guitarix
tuxguitar
sooperlooper
#recodring and DAW
audacity
ardour4
rosegarden4
seq24
muse
qtractor
non-session-manager
non-daw
non-sequencer
non-mixer
# audio-plugins
calf
dssi
jack-rack
ladspa
#ladpsa plugins
ladspa-amb-plugins
ladspa-autotalent-plugins
ladspa-blop-plugins
ladspa-cmt-plugins
ladspa-fil-plugins
ladspa-mcp-plugins
ladspa-rev-plugins
ladspa-swh-plugins
ladspa-tap-plugins
ladspa-vco-plugins
#lv2 plugins
lv2
lv2-avw-plugins
lv2-fil-plugins
lv2-invada-plugins
lv2-kn0ck0ut
lv2-ll-plugins
lv2-swh-plugins
lv2-vocoder-plugins
lv2-zynadd-plugins
lv2dynparam
lv2-abGate
lv2-c++-tools
lv2-samplv1
lv2-synthv1
lv2-drumkv1
lv2-triceratops
lv2-newtonator
lv2-x42-plugins
lv2-fomp-plugins
lv2-sorcer
lv2-fabla
lv2-artyfx-plugins
#dssi
nekobee-dssi
whysynth-dssi
xsynth-dssi
hexter-dssi
zynjacku
zita-at1
zita-rev1
#sound analasys, none of these are packaged yet
#praat bug_id=666656
@ -32,15 +148,35 @@ emacs
emacs-color-theme
vim
nano
mscore
lilypond
frescobaldi
mup
#audio utilities
jamin
lash
jack_capture
jaaa
jmeters
qastools
arpage
realTimeConfigQuickScan
rtirq
#patchage
#ladish #not packaged yet
japa
radium-compressor
# fedora jam theming (to be customized)
kfaenza-icon-theme
fedora-jam-backgrounds
fedora-jam-kde-theme
#Misc. Utils
screen
shutter
-ksnapshot
multimedia-menus
kernel-tools
@ -49,34 +185,33 @@ kernel-tools
firefox
thunderbird
#remove packages not needed
-akregator
-kaddressbook
-kmail
-kontact
-korganizer
-non-mixer
-non-session-manager
-non-sequencer
#remove packages not need
#-kdesdk-umbrello
#-kdesdk-kcachegrindy
#-kdesdk-kompare
#-kdepim
%end
%post
# Override livesys-kde settings
cat >> /var/lib/livesys/livesys-session-extra << EOF
#setup kickoff favorites
/bin/mkdir -p /etc/skel/.config
JAMFAVORITES=/usr/share/applications/firefox.desktop,/usr/share/applications/mozilla-thunderbird.desktop,/usr/share/applications/studio-controls.desktop,/usr/share/applications/ardour6.desktop,/usr/share/applications/carla.desktop,/usr/share/applications/org.kde.konsole.desktop,/usr/share/applications/org.kde.dolphin.desktop,/usr/share/applications/systemsettings.desktop
JAMFAVORITES=/usr/share/applications/firefox.desktop,/usr/share/applications/qjackctl.desktop,/usr/share/applications/qtractor.desktop,/usr/share/applications/frescobaldi.desktop,/usr/share/applications/org.kde.konsole.desktop,/usr/share/applications/kde4/dolphin.desktop,/usr/share/applications/systemsettings.desktop,/usr/share/applications/pavucontrol.desktop,/usr/share/applications/kde4/kfmclient_html.desktop,/usr/share/applications/kde4/Kontact.desktop,/usr/share/applications/kde4/ktp-contactlist.desktop
JAMFAVORITESLIVE=/usr/share/applications/liveinst.desktop,$JAMFAVORITES
cat <<FOE >> /etc/skel/.config/kickoffrc
cat <<EOF >> /etc/skel/.config/kickoffrc
[Favorites]
FavoriteURLs=$JAMFAVORITES
FOE
EOF
# Override fedora-live-kde-base.ks settings
sed -i /etc/rc.d/init.d/livesys -res"#^(FavoriteURLs=).*#\1${JAMFAVORITESLIVE}#"
cat >> /etc/rc.d/init.d/livesys << EOF
/usr/sbin/usermod -a -G jackuser,audio liveuser
EOF

View File

@ -3,7 +3,7 @@
# mailto:kde@lists.fedoraproject.org
%include fedora-live-base.ks
%include fedora-kde-common.ks
%include fedora-kde-packages.ks
%post
@ -19,7 +19,70 @@ cat > /root/.config/gtk-3.0/settings.ini << EOF
gtk-theme-name = Adwaita
EOF
# set livesys session type
sed -i 's/^livesys_session=.*/livesys_session="kde"/' /etc/sysconfig/livesys
# add initscript
cat >> /etc/rc.d/init.d/livesys << EOF
# set up autologin for user liveuser
if [ -f /etc/sddm.conf ]; then
sed -i 's/^#User=.*/User=liveuser/' /etc/sddm.conf
sed -i 's/^#Session=.*/Session=plasma.desktop/' /etc/sddm.conf
else
cat > /etc/sddm.conf << SDDM_EOF
[Autologin]
User=liveuser
Session=plasma.desktop
SDDM_EOF
fi
# add liveinst.desktop to favorites menu
mkdir -p /home/liveuser/.config/
cat > /home/liveuser/.config/kickoffrc << MENU_EOF
[Favorites]
FavoriteURLs=/usr/share/applications/firefox.desktop,/usr/share/applications/org.kde.dolphin.desktop,/usr/share/applications/systemsettings.desktop,/usr/share/applications/org.kde.konsole.desktop,/usr/share/applications/liveinst.desktop
MENU_EOF
# show liveinst.desktop on desktop and in menu
sed -i 's/NoDisplay=true/NoDisplay=false/' /usr/share/applications/liveinst.desktop
# set executable bit disable KDE security warning
chmod +x /usr/share/applications/liveinst.desktop
mkdir /home/liveuser/Desktop
cp -a /usr/share/applications/liveinst.desktop /home/liveuser/Desktop/
# Set akonadi backend
mkdir -p /home/liveuser/.config/akonadi
cat > /home/liveuser/.config/akonadi/akonadiserverrc << AKONADI_EOF
[%General]
Driver=QSQLITE3
AKONADI_EOF
# Disable plasma-pk-updates
sed -i \
-e "s|^X-KDE-PluginInfo-EnabledByDefault=true|X-KDE-PluginInfo-EnabledByDefault=false|g" \
/usr/share/plasma/plasmoids/org.kde.plasma.pkupdates/metadata.desktop \
/usr/share/kservices5/plasma-applet-org.kde.plasma.pkupdates.desktop
# Disable baloo
cat > /home/liveuser/.config/baloofilerc << BALOO_EOF
[Basic Settings]
Indexing-Enabled=false
BALOO_EOF
# Disable kres-migrator
cat > /home/liveuser/.kde/share/config/kres-migratorrc << KRES_EOF
[Migration]
Enabled=false
KRES_EOF
# Disable kwallet migrator
cat > /home/liveuser/.config/kwalletrc << KWALLET_EOL
[Migration]
alreadyMigrated=true
KWALLET_EOL
# make sure to set the right permissions and selinux contexts
chown -R liveuser:liveuser /home/liveuser/
restorecon -R /home/liveuser/
EOF
%end

View File

@ -11,7 +11,65 @@
%include fedora-live-minimization.ks
# DVD payload
part / --size=8000
part / --size=6144
%packages
# unwanted packages from @kde-desktop
# don't include these for now to fit on a cd
-desktop-backgrounds-basic
-kdeaccessibility*
#-ktorrent # kget has also basic torrent features (~3 megs)
-digikam # digikam has duplicate functionality with gwenview (~28 megs)
#-amarok # ~23 megs (mysql-embedded etc.)
-kipi-plugins # ~8 megs + drags in Marble
#-kdeplasma-addons # ~16 megs
#-krusader # ~4 megs
# Additional packages that are not default in kde-* groups, but useful
k3b # ~15 megs
#kdeartwork # only include some parts of kdeartwork
fuse
liveusb-creator
# only include kdegames-minimal
-kdegames
kdegames-minimal
### space issues
# fonts (we make no bones about admitting we're english-only)
wqy-microhei-fonts # a compact CJK font, to replace:
-naver-nanum-gothic-fonts # Korean
-vlgothic-fonts # Japanese
-adobe-source-han-sans-cn-fonts # simplified Chinese
-adobe-source-han-sans-tw-fonts # traditional Chinese
-paratype-pt-sans-fonts # Cyrillic (already supported by DejaVu), huge
#-stix-fonts # mathematical symbols
# remove input methods to free space
-@input-methods
-scim*
-m17n*
-ibus*
-iok
# save some space (from @standard)
-make
# admin-tools
-gnome-disk-utility
# kcm_clock still lacks some features, so keep system-config-date around
#-system-config-date
# prefer kcm_systemd
-system-config-services
# prefer/use kusers
-system-config-users
## avoid serious bugs by omitting broken stuff
%end
%post
%end

View File

@ -8,7 +8,7 @@
%include fedora-live-base.ks
%include fedora-live-minimization.ks
%include fedora-lxde-common.ks
%include fedora-lxde-packages.ks
%post
# LXDE and LXDM configuration
@ -19,8 +19,46 @@ PREFERRED=/usr/bin/startlxde
DISPLAYMANAGER=/usr/sbin/lxdm
EOF
# set livesys session type
sed -i 's/^livesys_session=.*/livesys_session="lxde"/' /etc/sysconfig/livesys
cat >> /etc/rc.d/init.d/livesys << EOF
# disable screensaver locking and make sure gamin gets started
cat > /etc/xdg/lxsession/LXDE/autostart << FOE
/usr/libexec/gam_server
@lxpanel --profile LXDE
@pcmanfm --desktop --profile LXDE
/usr/libexec/notification-daemon
FOE
# set up preferred apps
cat > /etc/xdg/libfm/pref-apps.conf << FOE
[Preferred Applications]
WebBrowser=firefox.desktop
MailClient=sylpheed.desktop
FOE
# set up auto-login for liveuser
sed -i 's/# autologin=.*/autologin=liveuser/g' /etc/lxdm/lxdm.conf
# Show harddisk install on the desktop
sed -i -e 's/NoDisplay=true/NoDisplay=false/' /usr/share/applications/liveinst.desktop
mkdir /home/liveuser/Desktop
cp /usr/share/applications/liveinst.desktop /home/liveuser/Desktop
# create default config for clipit, otherwise it displays a dialog on startup
mkdir -p /home/liveuser/.config/clipit
cat > /home/liveuser/.config/clipit/clipitrc << FOE
[rc]
use_copy=true
save_uris=true
save_history=false
statics_show=true
single_line=true
FOE
# this goes at the end after all other changes.
chown -R liveuser:liveuser /home/liveuser
restorecon -R /home/liveuser
EOF
%end

View File

@ -1,23 +0,0 @@
# fedora-live-lxqt.ks
#
# Description:
# Fedora Live Spin with the LXQt desktop environment
#
# Maintainer(s):
# Christian Dersch <lupinix@fedoraproject.org>
#
%include fedora-live-base.ks
%include fedora-live-minimization.ks
%include fedora-lxqt-common.ks
%packages
dracut-config-generic
%end
%post
# set livesys session type
sed -i 's/^livesys_session=.*/livesys_session="lxqt"/' /etc/sysconfig/livesys
%end

View File

@ -4,13 +4,79 @@
# mailto:desktop@lists.fedoraproject.org
%include fedora-live-base.ks
%include fedora-mate-common.ks
%include fedora-mate-packages.ks
%include fedora-live-minimization.ks
part / --size 8192
part / --size 6144
%post
# set livesys session type
sed -i 's/^livesys_session=.*/livesys_session="mate"/' /etc/sysconfig/livesys
%packages
# Drop things for size
-@3d-printing
-brasero
-colord
-fedora-icon-theme
-GConf2
-gnome-bluetooth-libs
-gnome-icon-theme
-gnome-icon-theme-symbolic
-gnome-software
-gnome-themes
-gnome-themes-standard
-gnome-user-docs
-@mate-applications
-mate-icon-theme-faenza
# Drop oversized fonts that aren't needed
# Drop things that pull in perl
# Dictionaries are big
# we're going to try keeping hunspell-* after notting, davidz, and ajax voiced
# strong preference to giving it a go on #fedora-desktop.
# also see http://bugzilla.gnome.org/681084
# Help and art can be big, too
-gnome-user-docs
-evolution-help
# Legacy cmdline things we don't want
-telnet
%end
%post
cat >> /etc/rc.d/init.d/livesys << EOF
# make the installer show up
if [ -f /usr/share/applications/liveinst.desktop ]; then
# Show harddisk install in shell dash
sed -i -e 's/NoDisplay=true/NoDisplay=false/' /usr/share/applications/liveinst.desktop ""
fi
mkdir /home/liveuser/Desktop
cp /usr/share/applications/liveinst.desktop /home/liveuser/Desktop
# rebuild schema cache with any overrides we installed
glib-compile-schemas /usr/share/glib-2.0/schemas
# set up lightdm autologin
sed -i 's/^#autologin-user=.*/autologin-user=liveuser/' /etc/lightdm/lightdm.conf
sed -i 's/^#autologin-user-timeout=.*/autologin-user-timeout=0/' /etc/lightdm/lightdm.conf
#sed -i 's/^#show-language-selector=.*/show-language-selector=true/' /etc/lightdm/lightdm-gtk-greeter.conf
# set MATE as default session, otherwise login will fail
sed -i 's/^#user-session=.*/user-session=mate/' /etc/lightdm/lightdm.conf
# Turn off PackageKit-command-not-found while uninstalled
if [ -f /etc/PackageKit/CommandNotFound.conf ]; then
sed -i -e 's/^SoftwareSourceSearch=true/SoftwareSourceSearch=false/' /etc/PackageKit/CommandNotFound.conf
fi
# make sure to set the right permissions and selinux contexts
chown -R liveuser:liveuser /home/liveuser/
restorecon -R /home/liveuser/
EOF
%end

View File

@ -4,6 +4,19 @@
%packages
# save some space
-mpage
-sox
-hplip
-numactl
-isdn4k-utils
-autofs
# smartcards won't really work on the livecd.
-coolkey
-wget
# scanning takes quite a bit of space :/
-xsane
-xsane-gimp
-sane-backends
%end

View File

@ -1,11 +0,0 @@
# Maintained by the Fedora Python SIG:
# http://fedoraproject.org/wiki/SIGs/Python
# mailto:python-devel@lists.fedoraproject.org
# The Workstion based Python Classroom Lab
%include fedora-live-workstation.ks
%include fedora-python-classroom-gnome-common.ks
# https://bugzilla.redhat.com/show_bug.cgi?id=1695796
part / --size 8192

View File

@ -1,6 +1,5 @@
# Maintained by x3mboy and the Fedora Robotics SIG:
# https://fedoraproject.org/wiki/SIGs/Robotics
# mailto:x3mboy@fedoraproject.org
# Maintained by the Fedora Robotics SIG:
# http://fedoraproject.org/wiki/SIGs/Robotics
# mailto:robotics@lists.fedoraproject.org
%include fedora-live-base.ks
@ -11,8 +10,7 @@ part / --size 10752
%packages
# Start with GNOME
# Install workstation-product-environment to resolve RhBug:1891500
@^workstation-product-environment
@gnome-desktop
# Add robotics development packages
@robotics-suite
@ -29,13 +27,9 @@ mercurial
-@graphical-internet
-@games
-@sound-and-video
-@dial-up
-@input-methods
-@standard
-@container-management
-@libreoffice
-@networkmanager-submodules
-@workstation-product
# Add a web browser
firefox
# Remove office suite
-libreoffice-*
@ -47,14 +41,13 @@ mercurial
# Drop things that pull in perl
-linux-atm
# No printing or scanning
# No printing
-foomatic-db-ppds
-foomatic
-sane-backends-drivers-scanners
-libsane-hpaio
# Dictionaries are big
-aspell-*
-hunspell-*
-man-pages*
-words
@ -68,6 +61,7 @@ mercurial
-krb5-auth-dialog
-krb5-workstation
-pam_krb5
-quota
-nano
-dos2unix
-finger
@ -76,8 +70,10 @@ mercurial
-mtr
-pinfo
-rsh
-nfs-utils
-ypbind
-yp-tools
-rpcbind
-acpid
-ntsysv
@ -90,9 +86,9 @@ mercurial
%end
# Rip the post-configuration from the live-desktop, set default shortcuts to IDEs
%post
# Extend the post-configuration from the live-desktop, set default shortcuts to IDEs
cat >> /var/lib/livesys/livesys-session-extra << EOF
cat >> /etc/rc.d/init.d/livesys << EOF
# disable screensaver locking
cat >> /usr/share/glib-2.0/schemas/org.gnome.desktop.screensaver.gschema.override << FOE
[org.gnome.desktop.screensaver]
@ -105,6 +101,12 @@ cat >> /usr/share/glib-2.0/schemas/org.gnome.desktop.lockdown.gschema.override <
disable-lock-screen=true
FOE
# disable updates plugin
cat >> /usr/share/glib-2.0/schemas/org.gnome.software.gschema.override << FOE
[org.gnome.software]
download-updates=false
FOE
# make the installer show up
if [ -f /usr/share/applications/liveinst.desktop ]; then
# Show harddisk install in shell dash
@ -114,7 +116,7 @@ if [ -f /usr/share/applications/liveinst.desktop ]; then
cat >> /usr/share/glib-2.0/schemas/org.gnome.shell.gschema.override << FOE
[org.gnome.shell]
favorite-apps=['firefox.desktop', 'org.qt-project.qtcreator.desktop', 'arduino.desktop', 'gnome-terminal.desktop','nautilus.desktop', 'anaconda.desktop']
favorite-apps=['firefox.desktop', 'eclipse.desktop', 'arduino.desktop', 'gnome-terminal.desktop','nautilus.desktop', 'anaconda.desktop']
FOE
fi
@ -122,5 +124,17 @@ fi
# rebuild schema cache with any overrides we installed
glib-compile-schemas /usr/share/glib-2.0/schemas
# set up auto-login
cat > /etc/gdm/custom.conf << FOE
[daemon]
AutomaticLoginEnable=True
AutomaticLogin=liveuser
FOE
# Turn off PackageKit-command-not-found while uninstalled
if [ -f /etc/PackageKit/CommandNotFound.conf ]; then
sed -i -e 's/^SoftwareSourceSearch=true/SoftwareSourceSearch=false/' /etc/PackageKit/CommandNotFound.conf
fi
EOF
%end

View File

@ -8,12 +8,168 @@
# Maintainer: Amit Saha <amitksaha@fedoraproject.org>
# https://fedoraproject.org/wiki/User:Amitksaha
%include fedora-live-kde-base.ks
%include fedora-live-minimization.ks
%include fedora-scientific-common.ks
%include fedora-live-kde.ks
# The recommended part size for DVDs is too close to use for the scientific spin
part / --size 15000
part / --size 14500
%packages
# Installing the default/mandatory packages from engineering & scientific
@engineering-and-scientific
# scilab
scilab
scilab-devel
scilab-doc
# Remove sagemath explicitly?
-sagemath
#Devel tools
#Install the mandatory packages from dev-tools and dev-libs
# C/C++ compiler, gdb, autotools, bison, flex, make, strace..
@development-tools
@development-libs
@c-development
@rpm-development-tools
#others, not included
# C++ libraries
blitz-devel
armadillo-devel
# Misc. related utils
ddd
valgrind
#python 2 tools/libraries not included from the groups
python-tools
python-ipython
python-ipython-console
python-ipython-notebook
sympy
python-networkx
python-pandas
#python 3 and tools/libraries not included from the groups
python3
python3-tools
python3-matplotlib
python3-scipy
python3-numpy
python3-ipython
python3-ipython-console
python3-ipython-notebook
python3-sympy
python3-networkx
python3-pandas
# matplotlib backends
python-matplotlib-qt4
python-matplotlib-tk
python3-matplotlib-qt4
python3-matplotlib-tk
# Include Java development tools
@java-development
apache-commons-math
#fortran compiler
gcc-gfortran
# GUI for R
rkward
# GUI for Octave
qtoctave
# julia
julia
julia-doc
# IDEs for the IDE folks
@eclipse
spyder
#writing & publishing
emacs
emacs-color-theme
vim
scribus
#scite
lyx
kile
#Presentation, Bibliography & Document arrangement
#tools
BibTool
pdfshuffler
# Parallel/Distributed computing libraries/tools
openmpi
openmpi-devel
valgrind-openmpi
libgomp
python-pp
mpi4py-openmpi
python3-mpi4py-openmpi
#Version control- a GUI for each as well
# Installing rapidsvn will also install subversion package
rapidsvn
git
git-gui
# Mercurial
mercurial
mercurial-hgk
#Backup Utilities
backintime-kde
#needs to install this specifically because of some conflict between openmpi
#and emacs (http://lists.fedoraproject.org/pipermail/devel/2011-July/153812.html)
libotf
#root
root
root-gui-fitpanel
root-python
#Multiple jobs/clustering system
# torque
# torque-server
# torque-scheduler
# torque-gui
# torque-libs
# torque-mom
# python-pbs
#Drawing, Picture viewing tools, Visualization tools
dia
inkscape
xzgv
gimp
ggobi
ggobi-devel
#g3data
#Mayavi
#Misc. Utils
screen
tmux
rlwrap
hexchat
shutter
fig2ps
bibtex2html
hevea
#Include Mozilla Firefox
firefox
%end
%post

View File

@ -6,7 +6,6 @@
# Maintainers:
# Fabian Affolter <fab [AT] fedoraproject <dot> org>
# Joerg Simon <jsimon [AT] fedoraproject <dot> org>
# JT Pennington <jt [AT] fedoraproject <dot> org>
# Acknowledgements:
# Fedora LiveCD Xfce Spin team - some work here was and will be inherited,
# many thanks, especially to Christoph Wickert!
@ -22,9 +21,7 @@
part / --size 10240
%packages
# install env-group to resolve RhBug:1891500
@^xfce-desktop-environment
@xfce-desktop
@xfce-apps
# Security tools
@ -39,7 +36,8 @@ gnome-keyring-pam
-acpid
-gimp-help
-desktop-backgrounds-basic
-PackageKit* # we switched to dnfdragora, so we don't need this
-realmd # only seems to be used in GNOME
-PackageKit* # we switched to yumex, so we don't need this
-aspell-* # dictionaries are big
-gnumeric
-foomatic-db-ppds
@ -102,7 +100,50 @@ PREFERRED=/usr/bin/startxfce4
DISPLAYMANAGER=/usr/sbin/lightdm
EOF
# set livesys session type
sed -i 's/^livesys_session=.*/livesys_session="xfce"/' /etc/sysconfig/livesys
cat >> /etc/rc.d/init.d/livesys << EOF
mkdir -p /home/liveuser/.config/xfce4
cat > /home/liveuser/.config/xfce4/helpers.rc << FOE
MailReader=sylpheed-claws
FileManager=Thunar
WebBrowser=midori
FOE
# disable screensaver locking (#674410)
cat >> /home/liveuser/.xscreensaver << FOE
mode: off
lock: False
dpmsEnabled: False
FOE
# deactivate xfconf-migration (#683161)
rm -f /etc/xdg/autostart/xfconf-migration-4.6.desktop || :
# deactivate xfce4-panel first-run dialog (#693569)
mkdir -p /home/liveuser/.config/xfce4/xfconf/xfce-perchannel-xml
cp /etc/xdg/xfce4/panel/default.xml /home/liveuser/.config/xfce4/xfconf/xfce-perchannel-xml/xfce4-panel.xml
# set up lightdm autologin
sed -i 's/^#autologin-user=.*/autologin-user=liveuser/' /etc/lightdm/lightdm.conf
sed -i 's/^#autologin-user-timeout=.*/autologin-user-timeout=0/' /etc/lightdm/lightdm.conf
#sed -i 's/^#show-language-selector=.*/show-language-selector=true/' /etc/lightdm/lightdm-gtk-greeter.conf
# set Xfce as default session, otherwise login will fail
sed -i 's/^#user-session=.*/user-session=xfce/' /etc/lightdm/lightdm.conf
# Show harddisk install on the desktop
sed -i -e 's/NoDisplay=true/NoDisplay=false/' /usr/share/applications/liveinst.desktop
mkdir /home/liveuser/Desktop
cp /usr/share/applications/liveinst.desktop /home/liveuser/Desktop
# and mark it as executable (new Xfce security feature)
chmod +x /home/liveuser/Desktop/liveinst.desktop
# this goes at the end after all other changes.
chown -R liveuser:liveuser /home/liveuser
restorecon -R /home/liveuser
EOF
%end

View File

@ -4,16 +4,125 @@
# - A Sugar environment that you can carry in your pocket
#
# Maintainers:
# - Chihurumnaya Ibiam <ibiamchihurumnaya AT gmail DOT com>
# - Alex Perez <aperez AT alexperez DOT com>
# - Peter Robinson <pbrobinson AT gmail DOT com>
# - Sebastian Dziallas <sdz AT fedoraproject DOT org>
# - Mel Chua <mchua AT fedoraproject DOT org>
%include fedora-live-base.ks
%include fedora-live-minimization.ks
%include fedora-soas-common.ks
%include fedora-soas-packages.ks
firewall --enabled --service=mdns,presence
%post
# set livesys session type
sed -i 's/^livesys_session=.*/livesys_session="soas"/' /etc/sysconfig/livesys
# Rebuild initrd for Sugar boot screen
KERNEL_VERSION=$(rpm -q kernel --qf '%{version}-%{release}.%{arch}\n')
/usr/sbin/plymouth-set-default-theme sugar
/sbin/dracut -f /boot/initramfs-$KERNEL_VERSION.img $KERNEL_VERSION
# Note that running rpm recreates the rpm db files which aren't needed or wanted
rm -f /var/lib/rpm/__db*
# Get proper release naming in the control panel
cat >> /boot/olpc_build << EOF
Sugar on a Stick
EOF
cat /etc/fedora-release >> /boot/olpc_build
# Add our activities to the favorites
cat > /usr/share/sugar/data/activities.defaults << EOF
org.laptop.WebActivity
org.laptop.HelpActivity
org.laptop.Chat
org.laptop.sugar.ReadActivity
org.laptop.sugar.GetBooksActivity
org.laptop.AbiWordActivity
org.laptop.TurtleArtActivity
org.laptop.Calculate
org.laptop.Clock
org.laptop.ImageViewerActivity
org.laptop.Memorize
org.laptop.physics
org.laptop.Pippy
org.laptop.RecordActivity
org.laptop.Oficina
org.laptop.StopWatchActivity
org.laptop.community.Finance
org.laptop.community.TypingTurtle
org.laptop.sugar.Jukebox
org.laptop.Words
org.eq.FotoToon
org.gnome.Labyrinth
com.laptop.Ruler
org.sugarlabs.AbacusActivity
org.sugarlabs.IRC
org.sugarlabs.InfoSlicer
org.sugarlabs.PortfolioActivity
org.sugarlabs.StoryActivity
org.sugarlabs.VisualMatchActivity
com.garycmartin.Moon
mulawa.Countries
tv.alterna.Clock
vu.lux.olpc.Maze
vu.lux.olpc.Speak
EOF
cat > /etc/sysconfig/desktop <<EOF
PREFERRED=/usr/bin/sugar
DISPLAYMANAGER=/usr/sbin/lightdm
EOF
# set up lightdm autologin
sed -i 's/^#autologin-user=.*/autologin-user=liveuser/' /etc/lightdm/lightdm.conf
sed -i 's/^#autologin-user-timeout=.*/autologin-user-timeout=0/' /etc/lightdm/lightdm.conf
# Don't use the default system user (in SoaS liveuser) as nick name
# Disable the logout menu item in Sugar
# Enable Sugar power management
cat >/usr/share/glib-2.0/schemas/sugar.soas.gschema.override <<EOF
[org.sugarlabs.user]
default-nick='disabled'
[org.sugarlabs]
show-logout=false
[org.sugarlabs.power]
automatic=true
EOF
/usr/bin/glib-compile-schemas /usr/share/glib-2.0/schemas/sugar.soas.gschema.override
cat >> /etc/rc.d/init.d/livesys << EOF
# set up lightdm autologin
sed -i 's/^#autologin-user=.*/autologin-user=liveuser/' /etc/lightdm/lightdm.conf
sed -i 's/^#autologin-user-timeout=.*/autologin-user-timeout=0/' /etc/lightdm/lightdm.conf
#sed -i 's/^#show-language-selector=.*/show-language-selector=true/' /etc/lightdm/lightdm-gtk-greeter.conf
# set Sugar as default session, otherwise login will fail
sed -i 's/^#user-session=.*/user-session=sugar/' /etc/lightdm/lightdm.conf
EOF
cat >> /etc/rc.d/init.d/livesys-late << EOF
# disable screensaver locking
cat >> /usr/share/glib-2.0/schemas/org.gnome.desktop.screensaver.gschema.override << FOE
[org.gnome.desktop.screensaver]
lock-enabled=false
FOE
# and hide the lock screen option
cat >> /usr/share/glib-2.0/schemas/org.gnome.desktop.lockdown.gschema.override << FOE
[org.gnome.desktop.lockdown]
disable-lock-screen=true
FOE
# rebuild schema cache with any overrides we installed
glib-compile-schemas /usr/share/glib-2.0/schemas
EOF
chmod 755 /etc/rc.d/init.d/livesys-late
/sbin/restorecon /etc/rc.d/init.d/livesys-late
/sbin/chkconfig --add livesys-late
%end

View File

@ -1,32 +0,0 @@
# fedora-livecd-sway.ks
#
# Description:
# - Fedora Live Spin with the tiling window manager Sway
#
# Maintainer(s):
# - Aleksei Bavshin <alebastr89@gmail.com>
# - Jiří Konečný <jkonecny@redhat.com>
# - Anthony Rabbito <hello@anthonyrabbito.com>
# - Fabio Alessandro Locati <me@fale.io>
%include fedora-live-base.ks
%include fedora-live-minimization.ks
%include fedora-sway-common.ks
%packages
# To be able to show installation instructions on background
nwg-wrapper
%end
%post
# create /etc/sysconfig/desktop (needed for installation)
cat > /etc/sysconfig/desktop <<EOF
PREFERRED=/usr/bin/sway
DISPLAYMANAGER=/bin/sddm
EOF
# set livesys session type
sed -i 's/^livesys_session=.*/livesys_session="sway"/' /etc/sysconfig/livesys
%end

View File

@ -3,18 +3,70 @@
# mailto:desktop@lists.fedoraproject.org
%include fedora-live-base.ks
%include fedora-workstation-common.ks
#
# Disable this for now as packagekit is causing compose failures
# by leaving a gpg-agent around holding /dev/null open.
#
#include snippets/packagekit-cached-metadata.ks
%include fedora-workstation-packages.ks
%include snippets/packagekit-cached-metadata.ks
part / --size 7750
part / --size 6656
%post
# set livesys session type
sed -i 's/^livesys_session=.*/livesys_session="gnome"/' /etc/sysconfig/livesys
cat >> /etc/rc.d/init.d/livesys << EOF
# disable updates plugin
cat >> /usr/share/glib-2.0/schemas/org.gnome.software.gschema.override << FOE
[org.gnome.software]
download-updates=false
FOE
# don't run gnome-initial-setup
mkdir ~liveuser/.config
touch ~liveuser/.config/gnome-initial-setup-done
# make the installer show up
if [ -f /usr/share/applications/liveinst.desktop ]; then
# Show harddisk install in shell dash
sed -i -e 's/NoDisplay=true/NoDisplay=false/' /usr/share/applications/liveinst.desktop ""
# need to move it to anaconda.desktop to make shell happy
mv /usr/share/applications/liveinst.desktop /usr/share/applications/anaconda.desktop
cat >> /usr/share/glib-2.0/schemas/org.gnome.shell.gschema.override << FOE
[org.gnome.shell]
favorite-apps=['firefox.desktop', 'evolution.desktop', 'rhythmbox.desktop', 'shotwell.desktop', 'org.gnome.Nautilus.desktop', 'anaconda.desktop']
FOE
# Make the welcome screen show up
if [ -f /usr/share/anaconda/gnome/fedora-welcome.desktop ]; then
mkdir -p ~liveuser/.config/autostart
cp /usr/share/anaconda/gnome/fedora-welcome.desktop /usr/share/applications/
cp /usr/share/anaconda/gnome/fedora-welcome.desktop ~liveuser/.config/autostart/
fi
# Copy Anaconda branding in place
if [ -d /usr/share/lorax/product/usr/share/anaconda ]; then
cp -a /usr/share/lorax/product/* /
fi
fi
# rebuild schema cache with any overrides we installed
glib-compile-schemas /usr/share/glib-2.0/schemas
# set up auto-login
cat > /etc/gdm/custom.conf << FOE
[daemon]
AutomaticLoginEnable=True
AutomaticLogin=liveuser
FOE
# Turn off PackageKit-command-not-found while uninstalled
if [ -f /etc/PackageKit/CommandNotFound.conf ]; then
sed -i -e 's/^SoftwareSourceSearch=true/SoftwareSourceSearch=false/' /etc/PackageKit/CommandNotFound.conf
fi
# make sure to set the right permissions and selinux contexts
chown -R liveuser:liveuser /home/liveuser/
restorecon -R /home/liveuser/
EOF
%end

View File

@ -11,10 +11,7 @@
%include fedora-live-base.ks
%include fedora-live-minimization.ks
%include fedora-xfce-common.ks
# need a bigger /
part / --size 6144
%include fedora-xfce-packages.ks
%post
# xfce configuration
@ -26,8 +23,51 @@ PREFERRED=/usr/bin/startxfce4
DISPLAYMANAGER=/usr/sbin/lightdm
EOF
# set livesys session type
sed -i 's/^livesys_session=.*/livesys_session="xfce"/' /etc/sysconfig/livesys
cat >> /etc/rc.d/init.d/livesys << EOF
mkdir -p /home/liveuser/.config/xfce4
cat > /home/liveuser/.config/xfce4/helpers.rc << FOE
MailReader=sylpheed-claws
FileManager=Thunar
WebBrowser=firefox
FOE
# disable screensaver locking (#674410)
cat >> /home/liveuser/.xscreensaver << FOE
mode: off
lock: False
dpmsEnabled: False
FOE
# deactivate xfconf-migration (#683161)
rm -f /etc/xdg/autostart/xfconf-migration-4.6.desktop || :
# deactivate xfce4-panel first-run dialog (#693569)
mkdir -p /home/liveuser/.config/xfce4/xfconf/xfce-perchannel-xml
cp /etc/xdg/xfce4/panel/default.xml /home/liveuser/.config/xfce4/xfconf/xfce-perchannel-xml/xfce4-panel.xml
# set up lightdm autologin
sed -i 's/^#autologin-user=.*/autologin-user=liveuser/' /etc/lightdm/lightdm.conf
sed -i 's/^#autologin-user-timeout=.*/autologin-user-timeout=0/' /etc/lightdm/lightdm.conf
#sed -i 's/^#show-language-selector=.*/show-language-selector=true/' /etc/lightdm/lightdm-gtk-greeter.conf
# set Xfce as default session, otherwise login will fail
sed -i 's/^#user-session=.*/user-session=xfce/' /etc/lightdm/lightdm.conf
# Show harddisk install on the desktop
sed -i -e 's/NoDisplay=true/NoDisplay=false/' /usr/share/applications/liveinst.desktop
mkdir /home/liveuser/Desktop
cp /usr/share/applications/liveinst.desktop /home/liveuser/Desktop
# and mark it as executable (new Xfce security feature)
chmod +x /home/liveuser/Desktop/liveinst.desktop
# this goes at the end after all other changes.
chown -R liveuser:liveuser /home/liveuser
restorecon -R /home/liveuser
EOF
%end

View File

@ -8,12 +8,11 @@
%packages
### LXDE desktop
# install env-group to resolve RhBug:1891500
@^lxde-desktop-environment
@lxde-desktop
@lxde-apps
@lxde-media
@lxde-office
@networkmanager-submodules
# FIXME: can be omitted once comps is updated
midori
@ -40,12 +39,12 @@ metacity
#-words
# save some space
-@admin-tools
-autofs
-acpid
-gimp-help
-desktop-backgrounds-basic
-PackageKit* # we switched to dnfdragora, so we don't need this
-realmd # only seems to be used in GNOME
-PackageKit* # we switched to yumex, so we don't need this
-foomatic-db-ppds
-foomatic
-stix-fonts

View File

@ -1,59 +0,0 @@
# fedora-lxqt-common.ks
#
# Description:
# Fedora Live Spin with the LXQt desktop environment
#
# Maintainer(s):
# Christian Dersch <lupinix@fedoraproject.org>
# Zamir SUN <zsun@fedoraproject.org>
#
%packages
# install env-group to resolve RhBug:1891500
@^lxqt-desktop-environment
@lxqt-apps
@lxqt-media
# for nm applet
gnome-keyring
# l10n
@lxqt-l10n
lximage-qt-l10n
obconf-qt-l10n
pavucontrol-qt-l10n
# MP3
gstreamer1-plugin-mpg123
# Text Editor
enki
# remove unneeded stuff to get a lightweight system
# fonts (we make no bones about admitting we're english-only)
wqy-microhei-fonts # a compact CJK font, to replace:
-naver-nanum-gothic-fonts # Korean
-vlgothic-fonts # Japanese
-adobe-source-han-sans-cn-fonts # simplified Chinese
-adobe-source-han-sans-tw-fonts # traditional Chinese
-pt-sans-fonts # Cyrillic (already supported by DejaVu), huge
#-stix-fonts # mathematical symbols
# remove input methods to free space
-@input-methods
-@admin-tools
-scim*
-m17n*
# Temporary include ibus to workaround RHBZ 1633225
# -ibus*
-iok
# Fix https://bugzilla.redhat.com/show_bug.cgi?id=1429132
# Why is this not pulled in by anaconda???
storaged
%end

View File

@ -1,59 +0,0 @@
%packages
# install env-group to resolve RhBug:1891500
@^mate-desktop-environment
fedora-release-matecompiz
compiz
compiz-plugins-main
compiz-plugins-extra
compiz-manager
compizconfig-python
compiz-plugins-experimental
libcompizconfig
compiz-plugins-main
ccsm
simple-ccsm
emerald-themes
emerald
fusion-icon
# blacklist applications which breaks mate-desktop
-audacious
# see https://bugzilla.redhat.com/show_bug.cgi?id=2068699
# and https://bugzilla.redhat.com/show_bug.cgi?id=1933494
# use earlyoom instead of systemd-oomd-defaults
earlyoom
-systemd-oomd-defaults
# office
@libreoffice
# dsl tools
rp-pppoe
# FIXME; apparently the glibc maintainers dislike this, but it got put into the
# desktop image at some point. We won't touch this one for now.
nss-mdns
# Drop things for size
-@3d-printing
-@admin-tools
-brasero
-fedora-icon-theme
-gnome-icon-theme
-gnome-icon-theme-symbolic
-gnome-logs
-gnome-software
-gnome-user-docs
-@mate-applications
# Help and art can be big, too
-gnome-user-docs
-evolution-help
# Legacy cmdline things we don't want
-telnet
%end

57
fedora-mate-packages.ks Normal file
View File

@ -0,0 +1,57 @@
%packages
-PackageKit* # we switched to yumex, so we don't need this
firefox
@mate
compiz
compiz-plugins-main
compiz-plugins-extra
compiz-manager
compizconfig-python
compiz-plugins-experimental
libcompizconfig
compiz-plugins-main
ccsm
simple-ccsm
emerald-themes
emerald
fusion-icon
@networkmanager-submodules
blueman
# some apps from mate-applications
caja-actions
mate-disk-usage-analyzer
# more backgrounds
f24-backgrounds-base
f24-backgrounds-mate
f24-backgrounds-extras-base
# system tools
system-config-printer
system-config-printer-applet
lightdm-gtk-greeter-settings
# audio video
parole
exaile
PackageKit-gstreamer-plugin
# blacklist applications which breaks mate-desktop
-audacious
# office
@libreoffice
# dsl tools
rp-pppoe
# some tools
p7zip
p7zip-plugins
# FIXME; apparently the glibc maintainers dislike this, but it got put into the
# desktop image at some point. We won't touch this one for now.
nss-mdns
%end

View File

@ -1,82 +0,0 @@
text
lang en_US.UTF-8
keyboard us
timezone US/Eastern
selinux --enforcing
# Disabled for modular compose (for now)
#firewall --enabled --service=mdns
# Disabled for modular compose (for now)
#services --enabled=sshd,chronyd,initial-setup
services --enabled=NetworkManager
network --bootproto=dhcp --device=link --activate
rootpw --lock --iscrypted locked
shutdown
bootloader --timeout=1 --append="no_timer_check console=tty1 console=ttyS0,115200n8"
zerombr
clearpart --all --initlabel --disklabel=msdos
autopart --type=plain
# make sure that initial-setup runs and lets us do all the configuration bits
firstboot --reconfig
%include fedora-repo.ks
%packages --excludedocs --excludeWeakdeps --nocore
bash
fedora-modular-release
filesystem
coreutils-single
util-linux
rpm
shadow-utils
microdnf
glibc-minimal-langpack
grubby
kernel
sssd-client
@networkmanager-submodules
-fedora-logos
-coreutils
-dosfstools
-e2fsprogs
-fuse-libs
-gnupg2-smime
-libss # used by e2fsprogs
-libusbx
-pinentry
-shared-mime-info
-trousers
-xkeyboard-config
-dracut
%end
%post
# Find the architecture we are on
arch=$(uname -m)
# Setup Raspberry Pi firmware
if [[ $arch == "aarch64" ]]; then
cp -P /usr/share/uboot/rpi_arm64/u-boot.bin /boot/efi/rpi-u-boot.bin
fi
releasever=$(rpm --eval '%{fedora}')
rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-$releasever-primary
echo "Packages within this disk image"
rpm -qa --qf '%{size}\t%{name}-%{version}-%{release}.%{arch}\n' |sort -rn
# Note that running rpm recreates the rpm db files which aren't needed or wanted
rm -f /var/lib/rpm/__db*
# remove random seed, the newly installed instance should make it's own
rm -f /var/lib/systemd/random-seed
# Disable network service here, as doing it in the services line
# fails due to RHBZ #1369794
/sbin/chkconfig network off
# Remove machine-id on pre generated images
rm -f /etc/machine-id
touch /etc/machine-id
%end

View File

@ -1,30 +0,0 @@
# Description: Common gnome based configuration for NeuroFedora spin images.
#
# Maintained by the NeuroFedora SIG:
# https://neuro.fedoraproject.org
# mailto:neuro-sig@lists.fedoraproject.org
# Please specify the individual package sets in their own ks files:
# - fedora-comp-neuro-common.ks
%packages
@firefox
# Editors
emacs
vim-X11
# This is no longer workstation
-@workstation-product
# No Workstation backgrounds
#-desktop-backgrounds-basic
#-*backgrounds-extras
%end
%post
#Override the favorite desktop application in Dash
sed -i "s/favorite-apps=."'*'"/favorite-apps=['firefox.desktop', 'org.gnome.Terminal.desktop', 'org.gnome.Nautilus.desktop', 'org.gnome.gedit.desktop', 'anaconda.desktop']/" /etc/rc.d/init.d/livesys
%end

View File

@ -1,13 +0,0 @@
# fedora-phosh-common.ks
#
# Description:
# - Fedora Disk image Spin with the phosh window manager
#
# Maintainer(s):
# - Kevin Fenzi <kevin@scrye.com>
%packages
# install env-group to resolve RhBug:1891500
@^phosh-desktop-environment
%end

View File

@ -1,45 +0,0 @@
# Maintained by the Fedora Python SIG:
# http://fedoraproject.org/wiki/SIGs/Python
# mailto:python-devel@lists.fedoraproject.org
# Common packages of all Python Classroom images
%packages
@python-classroom
@python-science
nano
openssh-clients
vim-enhanced
wget
# Remove Pythons possibly recommended by tox
-python2
-python26
-python27
-python33
-python34
-python35
-python36
-python37
-python38
-python2.7
-python3.5
-python3.6
-python3.7
-python3.8
-python3.9
-python3.10
-pypy
# Remove LaTeX, see https://bugzilla.redhat.com/show_bug.cgi?id=1862450
# and https://bugzilla.redhat.com/show_bug.cgi?id=1902354
-texlive-base
-texlive-latex
# Remove gdal recommended by networkx, brings in close to 600M of proj data
# Also explicitly list proj to make sure both packages are gone
# https://lists.fedoraproject.org/archives/list/python-devel@lists.fedoraproject.org/thread/LGC5IMMHZ4DM7GQNPAFC6GU362PPTN7O/
-python3-gdal
-proj
%end

View File

@ -1,107 +0,0 @@
# Maintained by the Fedora Python SIG:
# http://fedoraproject.org/wiki/SIGs/Python
# mailto:python-devel@lists.fedoraproject.org
# GNOME part of Python Classroom images
%include fedora-python-classroom-common.ks
%packages
emacs
python3-matplotlib-tk
python3-pillow-tk
# Remove extra gnome-y things
-@graphical-internet
-@games
-@sound-and-video
-@multimedia
-dleyna*
-gnome-boxes
-gnome-calendar
-gnome-clocks
-gnome-contacts
-gnome-disk-utility
-gnome-documents
-gnome-font-viewer
-gnome-maps
-gnome-photos
-gnome-weather
-grilo-plugins
-cheese
-totem
-totem-nautilus
# This is no longer workstation
-@workstation-product
# But we want to keep the Fedora desktop backgrounds
desktop-backgrounds-gnome
# Add a web browser
@firefox
# Remove office suite
-@libreoffice
-libreoffice-*
-planner
# Drop the Java plugin and Java
-icedtea-web
-*openjdk*
# No printing
-@printing
-foomatic-db-ppds
-foomatic
# Dictionaries are big
-aspell-*
-words
# Help and art can be big, too
-gnome-user-docs
-desktop-backgrounds-basic
-*backgrounds-extras
# Legacy cmdline things we don't want
-krb5-auth-dialog
-krb5-workstation
-pam_krb5
-quota
-dos2unix
-finger
-ftp
-jwhois
-mtr
-pinfo
-rsh
-nfs-utils
-ypbind
-yp-tools
-rpcbind
-acpid
-ntsysv
# Don't need this
-linux-atm
# Drop some system-config things
-system-config-language
-system-config-network
-system-config-rootpassword
-system-config-services
-policycoreutils-gui
# Inkscape is too big to be included
-inkscape
%end
%post
#Override the favorite desktop application in Dash
sed -i "s/favorite-apps=."'*'"/favorite-apps=['firefox.desktop', 'org.gnome.Terminal.desktop', 'org.gnome.Nautilus.desktop', 'org.gnome.gedit.desktop', 'anaconda.desktop']/" /etc/rc.d/init.d/livesys
%end

View File

@ -1,8 +0,0 @@
# Maintained by the Fedora Python SIG:
# http://fedoraproject.org/wiki/SIGs/Python
# mailto:python-devel@lists.fedoraproject.org
# Like the Python Classroom image, but tuned for vagrant.
%include fedora-cloud-base-vagrant.ks
%include fedora-python-classroom-common.ks

View File

@ -1,4 +1,4 @@
repo --name=fedora --mirrorlist=https://mirrors.fedoraproject.org/mirrorlist?repo=fedora-$releasever&arch=$basearch
repo --name=updates --mirrorlist=https://mirrors.fedoraproject.org/mirrorlist?repo=updates-released-f$releasever&arch=$basearch
#repo --name=updates-testing --mirrorlist=https://mirrors.fedoraproject.org/mirrorlist?repo=updates-testing-f$releasever&arch=$basearch
url --mirrorlist=https://mirrors.fedoraproject.org/mirrorlist?repo=fedora-$releasever&arch=$basearch
repo --name=fedora --mirrorlist=http://mirrors.fedoraproject.org/metalink?repo=fedora-$releasever&arch=$basearch
repo --name=updates --mirrorlist=http://mirrors.fedoraproject.org/metalink?repo=updates-released-f$releasever&arch=$basearch
#repo --name=updates-testing --mirrorlist=http://mirrors.fedoraproject.org/metalink?repo=updates-testing-f$releasever&arch=$basearch
url --mirrorlist=https://mirrors.fedoraproject.org/metalink?repo=fedora-$releasever&arch=$basearch

View File

@ -1,2 +1,2 @@
repo --name=rawhide --mirrorlist=https://mirrors.fedoraproject.org/mirrorlist?repo=rawhide&arch=$basearch
url --mirrorlist=https://mirrors.fedoraproject.org/mirrorlist?repo=rawhide&arch=$basearch
repo --name=rawhide --mirrorlist=https://mirrors.fedoraproject.org/metalink?repo=rawhide&arch=$basearch
url --mirrorlist=https://mirrors.fedoraproject.org/metalink?repo=rawhide&arch=$basearch

View File

@ -3,7 +3,7 @@
# Exactly one of the following should be uncommented
# For the master branch the following should be uncommented
%include fedora-repo-rawhide.ks
# %include fedora-repo-rawhide.ks
# For non-master branches the following should be uncommented
# %include fedora-repo-not-rawhide.ks
%include fedora-repo-not-rawhide.ks

View File

@ -1,141 +0,0 @@
%packages
# Installing the default/mandatory packages from engineering & scientific
@engineering-and-scientific
# scilab
## scilab
## scilab-devel
## scilab-doc
# Remove sagemath explicitly?
-sagemath
#Devel tools
#Install the mandatory packages from dev-tools and dev-libs
# C/C++ compiler, gdb, autotools, bison, flex, make, strace..
@development-tools
@development-libs
@c-development
@rpm-development-tools
#others, not included
# C++ libraries
blitz-devel
armadillo-devel
# Misc. related utils
ddd
valgrind
#python 3 and tools/libraries not included from the groups
python3
python3-tools
python3-matplotlib
python3-scipy
python3-numpy
python3-ipython
python3-ipython-console
python3-ipython-notebook
python3-sympy
python3-networkx
python3-pandas
# matplotlib backends
python3-matplotlib-qt5
python3-matplotlib-tk
# Include Java development tools
@java-development
apache-commons-math
#fortran compiler
gcc-gfortran
# GUI for R
rkward
# julia
julia
julia-doc
julia-devel
python3-spyder
python3-spyder-kernels
#writing & publishing
emacs
emacs-color-theme
vim
scribus
#scite
lyx
kile
#Presentation, Bibliography & Document arrangement
#tools
BibTool
pdfshuffler
# Parallel/Distributed computing libraries/tools
openmpi
openmpi-devel
valgrind-openmpi
libgomp
python3-mpi4py-openmpi
python3-mpi4py-mpich
#Version control- a GUI for each as well
# Installing rapidsvn will also install subversion package
rapidsvn
git
git-gui
# Mercurial
mercurial
mercurial-hgk
#Backup Utilities
backintime-kde
#needs to install this specifically because of some conflict between openmpi
#and emacs (http://lists.fedoraproject.org/pipermail/devel/2011-July/153812.html)
libotf
#root
root
root-gui-fitpanel
#Multiple jobs/clustering system
# torque
# torque-server
# torque-scheduler
# torque-gui
# torque-libs
# torque-mom
# python-pbs
#Drawing, Picture viewing tools, Visualization tools
dia
inkscape
xzgv
gimp
## ggobi
## ggobi-devel
#g3data
#Mayavi
#Misc. Utils
screen
tmux
rlwrap
hexchat
fig2ps
hevea
#Include Mozilla Firefox
firefox
%end

View File

@ -1,12 +0,0 @@
# Fedora Scientific Vagrant box
# Fedora Scientific: For researchers in Science and Engineering
# Fedora-Scientific aims to create a Fedora which has the generic
# toolset for the researcher
# Web: https://labs.fedoraproject.org/en/scientific/
# Maintainer: Amit Saha <amitksaha@fedoraproject.org>
# https://fedoraproject.org/wiki/User:Amitksaha
%include fedora-cloud-base-vagrant.ks
%include fedora-scientific-common.ks

View File

@ -1,201 +0,0 @@
# fedora-server-vm-full.ks (rel. 1.01)
# Kickstart file to build a Fedora Server Edition VM disk image.
# The image aims to resemble as close as technically possible the
# full features of a Fedora Server Edition in a virtual machine.
#
# The image uses GPT partition type as of default in Fedora 37.
#
# At first boot it opens a text mode basic configuration screen.
#
# This kickstart file is designed to be used with ImageFactory (in Koji).
#
# To build the image locally, you need to install ImageFactory and
# various additional helpers and configuration files.
# See Fedora Server Edition user documentation tutorial.
# Use text mode install
text
# Keyboard layouts
keyboard 'us'
# System language
lang en_US.UTF-8
# System timezone
# set time zone to GMT (Etcetera/UTC)
timezone Etc/UTC --utc
# Root password
rootpw --iscrypted --lock locked
# SELinux configuration
selinux --enforcing
# System bootloader configuration
bootloader --location=mbr --timeout=1 --append="console=tty1 console=ttyS0,115200n8"
# Network information
network --bootproto=dhcp --device=link --activate --onboot=on
# Firewall configuration
firewall --enabled --service=mdns
# System services
services --enabled="sshd,NetworkManager,chronyd,initial-setup"
# Run the Setup Agent on first boot
firstboot --reconfig
# Partition Information. Use GPT by default (since Fedora 37)
# Resemble the Partitioning used for Fedora Server Install media
clearpart --all --initlabel --disklabel=gpt
reqpart --add-boot
part pv.007 --size=4000 --grow
volgroup sysvg pv.007
logvol / --vgname=sysvg --size=4000 --grow --maxsize=16000 --fstype=xfs --name=root --label=sysroot
# Include URLs for network installation dynamically, dependent on Fedora release
# and imagefactory runtime environment
%include fedora-repo.ks
# Shutdown after installation
shutdown
##### begin package list #############################################
%packages --inst-langs=en
@server-product
@core
@headless-management
@standard
@networkmanager-submodules
# container management is an optional install item on disk media.
# Install options not available with VMs. So we don't include it
# despite trying to resemble a DVD installation as close as possible.
##@container-management
@domain-client
@guest-agents
# All arm-tools packages install on aarch64/armhfp only
# TODO: on a x86_64 devel environment are @arm-tools not available
# and cause a build error.
# @arm-tools
# Standard Fedora Package Groups
## dracut-config-generic ## included in =core=
glibc-all-langpacks
initial-setup
kernel-core
-dracut-config-rescue
-generic-release*
-initial-setup-gui
-kernel
-linux-firmware
-plymouth
# pulled in by @standard
-smartmontools
-smartmontools-selinux
%end
##### end package list ###############################################
##### begin kickstart post script ####################################
%post --erroronfail --log=/root/anaconda-post-1.log
# Find the architecture we are on
arch=$(uname -m)
# Import RPM GPG key, during installation saved in /etc/pki
echo "Import RPM GPG key"
releasever=$(rpm --eval '%{fedora}')
basearch=$(uname -i)
rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-fedora-$releasever-$basearch
# See the systemd-random-seed.service man page that says:
# " It is recommended to remove the random seed from OS images intended
# for replication on multiple systems"
# The newly installed instance should make it's own
echo "Removing random-seed so it's not the same in every image."
rm -f /var/lib/systemd/random-seed
# When we build the image a networking config file gets left behind.
# Let's clean it up.
echo "Cleanup leftover networking configuration"
rm -f /etc/NetworkManager/system-connections/*.nmconnection
# Truncate the /etc/resolv.conf left over from NetworkManager during the
# kickstart because the DNS server is environment specific.
truncate -s 0 /etc/resolv.conf
echo "Cleaning repodata to save space."
dnf clean all
# linux-firmware is installed by default and is quite large. As of mid 2020:
# Total download size: 97 M
# Installed size: 268 M
# Not needed in virtual environment.
echo "Removing linux-firmware package."
rpm -e linux-firmware
# Will ever anybody see this?
echo "Packages within this disk image"
rpm -qa --qf '%{size}\t%{name}-%{version}-%{release}.%{arch}\n' |sort -rn
# Note that running rpm recreates the rpm db files which aren't needed or wanted
rm -f /var/lib/rpm/__db*
# Do we need a serial terminal with a VM?
if [[ $arch == "aarch64" ]] || [[ $arch == "armv7l" ]]; then
# Anaconda adds console=tty0 to the grub boot line on all images. this is problematic
# when you are using fedora via serial console as you do not get any output post grub
# linux does a good job of knowing what consoles need to be enabled.
# https://bugzilla.redhat.com/show_bug.cgi?id=2022757
sed -i -e 's|console=tty0||g' /boot/loader/entries/*conf
fi
# Remove machine-id on pre generated images
rm -f /etc/machine-id
touch /etc/machine-id
%end
##### end kickstart post script #####################################
##### begin custom post script (after base) #########################
%post
echo "Zeroing out empty space."
# Create zeros file with nodatacow and no compression
touch /var/tmp/zeros
chattr +C /var/tmp/zeros
# This forces the filesystem to reclaim space from deleted files
dd bs=1M if=/dev/zero of=/var/tmp/zeros || :
echo "(Don't worry -- that out-of-space error was expected.)"
# Force sync to disk
sync /
rm -f /var/tmp/zeros
sync /
# setup systemd to boot to the right runlevel
echo -n "Setting default runlevel to multiuser text mode"
rm -f /etc/systemd/system/default.target
ln -s /lib/systemd/system/multi-user.target /etc/systemd/system/default.target
echo .
# When we build the image /var/log gets populated.
# Let's clean it up.
echo "Cleanup leftover in /var/log"
rm -rf /var/log/*
%end
##### end custom post script ########################################

View File

@ -1,123 +0,0 @@
# fedora-livecd-soas.ks
#
# Description:
# - A Sugar environment that you can carry in your pocket
#
# Maintainers:
# - Chihurumnaya Ibiam <ibiamchihurumnaya AT gmail DOT com>
# - Alex Perez <aperez AT alexperez DOT com>
firewall --enabled --service=mdns,presence
%packages
# install env-group to resolve RhBug:1891500
@^sugar-desktop-environment
# == Core Sugar Platform ==
fedora-release-soas
# explicitly remove a bunch of extra stuff
-openbox
-@fonts
-@dial-up
-@multimedia
-@printing
-foomatic
-@gnome-desktop
-yp-tools
-ypbind
-rdate
-rdist
-icedtea-web
-firefox
-glx-utils
-nmap-ncat
-PackageKit
-eekboard-libs
-open-vm-tools*
-gfs2-utils
-abrt-cli
-ibus*
-hyperv-daemons
-sane-backends
-sane-backends-drivers-scanners
-dhcp-client
-gcc-gdb-plugin
-gcc
# Add some extra fonts
dejavu-sans-fonts
dejavu-sans-mono-fonts
madan-fonts
aajohan-comfortaa-fonts
sil-abyssinica-fonts
vlgothic-fonts
# Usefulness for DSL connections as per:
# http://bugs.sugarlabs.org/ticket/1951
rp-pppoe
# Useful for SoaS duplication from:
# http://bugs.sugarlabs.org/ticket/74
livecd-tools
# Get the Sugar boot screen
-plymouth-system-theme
-plymouth-theme-charge
%end
%post
# Get proper release naming in the control panel
cat >> /boot/olpc_build << EOF
Sugar on a Stick
EOF
cat /etc/fedora-release >> /boot/olpc_build
# Rebuild initrd for Sugar boot screen
KERNEL_VERSION=$(rpm -q kernel --qf '%{version}-%{release}.%{arch}\n')
/usr/sbin/plymouth-set-default-theme sugar
sed -i -r 's/(omit_dracutmodules\+\=.*) plymouth (.*)/\1 \2/' /etc/dracut.conf.d/99-liveos.conf
dracut --force-add plymouth -N -f /boot/initramfs-$KERNEL_VERSION.img $KERNEL_VERSION
# Note that running rpm recreates the rpm db files which aren't needed or wanted
rm -f /var/lib/rpm/__db*
cat > /etc/sysconfig/desktop <<EOF
PREFERRED=/usr/bin/sugar
DISPLAYMANAGER=/usr/sbin/lightdm
EOF
# set up lightdm autologin
sed -i 's/^#autologin-user=.*/autologin-user=liveuser/' /etc/lightdm/lightdm.conf
sed -i 's/^#autologin-user-timeout=.*/autologin-user-timeout=0/' /etc/lightdm/lightdm.conf
# Don't use the default system user (in SoaS liveuser) as nick name
# Disable the logout menu item in Sugar
# Enable Sugar power management
cat >/usr/share/glib-2.0/schemas/sugar.soas.gschema.override <<EOF
[org.sugarlabs.user]
default-nick='disabled'
[org.sugarlabs]
show-logout=false
[org.sugarlabs.power]
automatic=true
EOF
/usr/bin/glib-compile-schemas /usr/share/glib-2.0/schemas
%end
%post --nochroot
for n in initramfs initrd; do
for img in "$LIVE_ROOT/images/pxeboot/$n"* ; do
[ -e "$img" ] && cp -a "$INSTALL_ROOT"/boot/initramfs-*.img "$img"
done
done
%end

86
fedora-soas-packages.ks Normal file
View File

@ -0,0 +1,86 @@
# fedora-livecd-soas.ks
#
# Description:
# - A Sugar environment that you can carry in your pocket
#
# Maintainers:
# - Peter Robinson <pbrobinson AT gmail DOT com>
# - Sebastian Dziallas <sdz AT fedoraproject DOT org>
# - Mel Chua <mchua AT fedoraproject DOT org>
%packages
-@fonts
-@dial-up
-@multimedia
-@printing
-foomatic
-@gnome-desktop
-yp-tools
-ypbind
-rdate
-rdist
-icedtea-web
-firefox
-glx-utils
-nmap-ncat
-PackageKit
-libfprint
-realmd
-eekboard-libs
-open-vm-tools*
-gfs2-utils
-abrt-cli
-ibus*
-hyperv-daemons
-webkitgtk4-plugin-process-gtk2
# Add some extra fonts
dejavu-sans-fonts
dejavu-sans-mono-fonts
madan-fonts
aajohan-comfortaa-fonts
sil-abyssinica-fonts
vlgothic-fonts
# == Core Sugar Platform ==
@sugar-desktop
-sugar-ruler
sugar-cp-updater
lightdm
lightdm-gtk
# Write breaks unless we do this (we don't need it anyway)
# enable for testing in the F17 dev cycle
@input-methods
# Needed for wifi, bluetooth and WWAN connection support
@networkmanager-submodules
# == Platform Components ==
# from http://wiki.sugarlabs.org/go/0.94/Platform_Components
alsa-plugins-pulseaudio
alsa-utils
gstreamer1-plugins-base
gstreamer1-plugins-good
gstreamer1-plugins-bad-free
gstreamer-plugins-espeak
pulseaudio
pulseaudio-utils
# explicitly remove openbox and hopefully deal with what firstboot wants
-openbox
# remove deps that come from god knows where
-sane-backends
-sane-backends-drivers-scanners
# Usefulness for DSL connections as per:
# http://bugs.sugarlabs.org/ticket/1951
rp-pppoe
# Get the Sugar boot screen
-plymouth-system-theme
-plymouth-theme-charge
sugar-logos
%end

View File

@ -1,17 +0,0 @@
# fedora-livecd-sway.ks
#
# Description:
# - Fedora Live Spin with the tiling window manager Sway
#
# Maintainer(s):
# - Aleksei Bavshin <alebastr89@gmail.com>
# - Jiří Konečný <jkonecny@redhat.com>
# - Anthony Rabbito <hello@anthonyrabbito.com>
# - Fabio Alessandro Locati <me@fale.io>
%packages
fedora-release-sway
@^sway-desktop-environment
@firefox
@swaywm-extended
%end

View File

@ -1,15 +0,0 @@
%packages
# Exclude unwanted groups that fedora-live-base.ks pulls in
-@dial-up
-@input-methods
-@standard
# Install workstation-product-environment to resolve RhBug:1891500
@^workstation-product-environment
# Exclude unwanted packages from @anaconda-tools group
-gfs2-utils
-reiserfs-utils
%end

View File

@ -0,0 +1,30 @@
%packages
# Exclude unwanted groups that fedora-live-base.ks pulls in
-@dial-up
-@input-methods
-@standard
# Make sure to sync any additions / removals done here with
# workstation-product-environment in comps
@base-x
@core
@firefox
@fonts
@gnome-desktop
@guest-desktop-agents
@hardware-support
@libreoffice
@multimedia
@networkmanager-submodules
@printing
@workstation-product
# Branding for the installer
fedora-productimg-workstation
# Exclude unwanted packages from @anaconda-tools group
-gfs2-utils
-reiserfs-utils
%end

View File

@ -1,34 +0,0 @@
# fedora-livecd-xfce.ks
#
# Description:
# - Fedora Live Spin with the light-weight XFCE Desktop Environment
#
# Maintainer(s):
# - Kevin Fenzi <kevin@tummy.com>
# - Adam Miller <maxamillion@fedoraproject.org>
# - Mukundan Ragavan <nonamedotc@fedoraproject.org>
%packages
fedora-release-xfce
# install env-group to resolve RhBug:1891500
@^xfce-desktop-environment
@xfce-apps
@xfce-extra-plugins
@xfce-media
@xfce-office
wget
system-config-printer
# save some space
-autofs
-acpid
-gimp-help
-desktop-backgrounds-basic
-aspell-* # dictionaries are big
-xfce4-sensors-plugin
-xfce4-eyes-plugin
%end

Some files were not shown because too many files have changed in this diff Show More