If the package set repo contains any modular package, the module
metadata is added there as well.
This is needed to accomodate change in DNF that refuses to work with
repo with modular packages if the metadata is not there. This DNF change
can cause issues in buildinstall phase.
Related: https://bugzilla.redhat.com/show_bug.cgi?id=1623128
The hybrid solver is modified to not create a separate repo with the
module metadata anymore, since it will be available in the repo with
packages. This also allows us to drop code to look into lookaside repos.
We still need to iterate over local modules in order to find out what
platform should be used.
JIRA: COMPOSE-3621
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This reverts commit ac15f21135.
It is still needed if nodeps gather method is used. It simply returns
all packages listed in all modules.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1708661
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Instead of validating both variants exist, let's just check the
existence of only the variant that is being used as a lookaside.
If the configuration says Foo depends on Bar, the error is reported only
if Foo exists but Bar does not. Any other situation is silently ignored.
JIRA: COMPOSE-3393
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This source does not really return anything useful. It was necessary to
process the source modulemd to fill in list of RPMs. Since we now get
the final files from Koji, this is not needed anymore and the source can
be dropped.
This change requires a lot of tweaks for test.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Behavior before this change: debuginfo was added based on source RPMs.
Pungi would get all debuginfo for all architectures that include at
least one binary package. This had a consequence that if foo-x.x86_64
and foo-x.i686 from the same built were included, foo-y-debuginfo.i686
would be included despite foo-y only being present for x86_64.
The patch changes this to work on binary package level: for each
included package `x`, check if there is `x-debuginfo` or
`x-debugsource`, and include them. Packages added in this way have to go
through one iteration of the solver, to account for cases such as
`x-libs-debuginfo` depending on `x-debuginfo` (with only `x` starting
this chain).
To make it slightly faster, the invocation of fus is changed to only
process newly added package in each iteration. It should have no effect
on the results, and subsequent iterations are much faster if they don't
process the same stuff again and again.
JIRA: COMPOSE-3247
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
For binary packages the filters are handled at the depsolver level.
However sources and debuginfo is added later in the process, so the
filters have to be explicitly applied.
JIRA: COMPOSE-3114
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
If the hybrid solver is used in a situation where there are modules in
lookaside repo, but not in the compose itself, it will fail to detect
any platform. Since we are already opening the module repodata, we can
retrieve platforms from all modules in there as well.
If there are conflicts (e.g. multiple modules depending on different
platforms), an error will be reported.
JIRA: COMPOSE-3277
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
If there are variants that depend on another, they should be processed
in order to make sure packages from the base variant are linked first.
That way the srpm cache is populated and any package in layered variant
but with source in base will have access to correct epoch information.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This is really an oversight. The list of packages from prepopulate list
should be treated the same as if the packagees were coming from comps or
additional packages.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The initial implementation is very coarse. It enables it for all
variants and all modules. That is not always wanted.
With this patch, the config file has to explicitly list the devel
modules for each variant that should have it. The variant must be
configured also to include the non-devel module (but the module may be
in lookaside so it won't be included).
We now include module metadata in the internal lookaside repo, so that
this whole thing works if one variant is built on top of another.
JIRA: COMPOSE-3034
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
When the configuration lists `*` in `additional_packages`, it has a
special meaning. If it's passed to fus directly, it will use it to match
all modules and RPMs that are not masked by a package available in some
default stream. Neither is good. We don't want it to match modules, and
we want even the masked packages.
The fix is to expand the wildcard to a list of NVRs and give that to
fus. It should include the package even if it is masked.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
There is no repoclosure that correctly understands modules. The best
thing we can offer is the errors reported by the depsolver.
JIRA: COMPOSE-2321
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
If a multilib package fails to be added (broken dependencies, or it
doesn't exist at all), we want to track it and eventually stop the
iterations.
Merges: https://pagure.io/pungi/pull-request/1071
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Without this we don't have artifacts from all modules when the first
modular variant is solved. That makes some modular packages appear as
bare.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
If there are two variants with different module sets, the missing
modulemd from variant B causeing depsolving in variant A to consider the
packages as non-modular. That is wrong.
Related: https://bugzilla.redhat.com/show_bug.cgi?id=1640125
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Instead of having one giant command line, write the long list into a
file and pass that to the solver.
The items on the input list are sorted for easy processing.
JIRA: COMPOSE-3012
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
We can't drop the whole package set once the first solver iteration
finishes, because it runs for each arch separately and we need the data
for each of them. We can however delete the arch specific portion.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
If we want to include the -devel modules, the original modules should be
present for the solver. However if we put them in both local and
lookaside repos, fus will get confused. Let's not include modules that
are in lookaside in the module repo created for the solving job.
Even if the modular packages are present in the local repo, they are
identical to the ones in lookaside, and so they should not make it into
the result anyway.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
It's possible we ask to include module X, but it's in lookaside and as
such it should not be in the output. Therefore we need to remove it from
the variant.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
By default nothing should change. This patch adds a new config option
that enables all this new craziness:
* it turns of applying module filters at pkgset level
* it creates new modules and adds them to the compose
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The module has same S:V:C, but the name is suffixed with `-devel`. The
module should contain all packages from the module koji tag that were
not included in the actual module.
The devel module has the same dependencies as the regular module, but
also additionally depends on the original module. The API and profiles
are cleared in the new module.
In the metadata it shows the same koji tag.
The test if package goes to the module is refactored to a function to
make work with the negated case a bit easier.
There may be unneeded multilib packages in the -devel module, because
there might be buildtime dependencies between things that we don't see.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Clear API and profiles
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
A repo does not necessarily have the location_base attribute if the
packages are next to the repodata. This can easily happen for lookaside
repos.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The pool is created in multiple places, and the process is always to
create an instance and add workers to it. Let's abstract the loop in a
method.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
There's an environment variable that can suppress printing of PID for
every debug message. It provides us with no real information and only
makes the log larger.
JIRA: COMPOSE-2973
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
There should not be multilib arches when checking if noarch package is
compatible with current arch. Otherwise we might be excluding a package
from x86_64 just because it does not work on i686.
JIRA: COMPOSE-2885
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The multilib library expects us to ask about the candidate package for
another arch (should I include this as multilib?) and not the current
arch (should I include other arches for this package?).
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
There can be multiple modules with the same name and stream. They should
all have the same version, but will have different contexts. Fus takes
only N:S as input, but should pull in all matching modules. We just need
to give it correct data in the repo.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
If we're running in debug mode and the file is already present, it
should not be modified. This means that in order to rerun the actual
gather phase the file needs to be manually deleted first. However the
much more common use is to skip gather phase (because only images should
be re-run). In that case the manifest will be preserved correctly.
JIRA: COMPOSE-2756
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
If the modulemd contains a whitelist of packages (under buildopts), it
means the packages are possibly renamed, and we need to check that list
instead of components.rpms.
Multilib does not really work now, anything with non-native arch is
skipped.
JIRA: RCM-38019
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Fus returns also RPMs in modules, but until latest version it only
worked if the package was in the same repo as the metadata. This changed
in latest version and now Pungi does not need to expand the list
anymore.
JIRA: COMPOSE-2779
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The check if a variant is hybrid (or modular only) currently only looks
at comps groups. However it's possible there will be no comps groups,
but packages will be listed explicitly in config as additional_packages.
Relates: RCM-37979
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Comps file specifies a pattern for some packages. If that package is
installed, all packages matching the pattern are added as well. This can
be added to fus as another pass.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
When getting list of initial packages, only run the source and do
nothing else. Additional package, system-release etc. will be added only
to comps.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This patch adds a new gather method called `hybrid`, which uses a `fus`
binary, which must exist somewhere on the `$PATH`. It will call it
multiple times to add multilib packages.
The solver can handle packages, modules and comps groups as input.
However comps groups are never passed in. Pungi will expand it to a list
of packages to avoid issues with comps handling in fus. It ignores
optional packages, and if the group mentions a package that does not
exist, nothing else from the group is included.
Multilib is also handled outside of fus. Pungi will run it, parse the
packages from output, determines multilib packages and adds them as
input. Then it runs the solver again. This is done until nothing new is
added. Usually two passes should be enough.
Source packages and debuginfo are added as a final step. All debuginfo
packages from any included source are added. If the source or debuginfo
package is included in any lookaside repo, it will be skipped.
The tool expects to get a platform stream that should be provided for
modules to depend on. Pungi looks into the modules and gets the platform
from there. If there are more requests, an error is raised.
There is some missing functionality and options that are ignored.
Particularly these are:
* gather_fulltree
* gather_selfhosting
* greedy_method
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The Modulemd.copy() method has been available since libmodulemd 1.1
and is much faster than dumping to a string and parsing it again.
Signed-off-by: Stephen Gallagher <sgallagh@redhat.com>
Merges: https://pagure.io/pungi/pull-request/965
It does not exist on Python 3. Converting the exception to string works
identically.
The validate methods on many phases are simplified by not calling the
parent (which does not do anything).
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Lubomír Sedlář
Haibo Lin
Jan Kaluza
Stephen Gallagher