Move repoclosure out from test phase into its own phase and
run parallel with image building phases(osbs, imagebuild, ...)
to speed things up.
JIRA: RHELCMP-8
Signed-off-by: Haibo Lin <hlin@redhat.com>
I've analysed multiple nigthly composes and often the only difference
in the configuration between two nightly composes is different
`product_id` commit hash.
The `product_id` is used in later `createrepo` phase and does not
influence the gather phase at all. I therefore think it can be
whitelisted in gather phase reuse code.
Signed-off-by: Jan Kaluza <jkaluza@redhat.com>
When modules are used, there are lot of small package sets. These
package sets have usually less than 500 packages. The createrepo
part of `MaterializedPackageSet.create` executed for such small
set of packages takes around 1 second. Most of this time
the createrepo_c runs in single thread. It does the initialization,
it writes the XML files, ...
The parts of createrepo which can be run in parallel and therefore
would use all the CPUs are quite small for very small package sets.
This commit therefore executes multiple threads with
`MaterializedPackageSet.create` for these very small package sets.
This saves around 40 seconds from pkgset phase for RHEL compose.
Signed-off-by: Jan Kaluza <jkaluza@redhat.com>
- Get also requires/provides of RPMs in package set.
- Store the results of gather phase as pickle file.
- Reuse old gather phase results in case Pungi configuration
did not change, the "names" of RPMs in global package set
did not change and their requires/provides did not change.
- Add `gather_allow_reuse` option to enable this feature.
Signed-off-by: Jan Kaluza <jkaluza@redhat.com>
Add gather_allow_reuse, add more tests and better handling of gather_lookaside_repos.
The current code calls `find_old_compose` followed by multiple `os.path.*`
calls to find out if particular file exists in the old compose. This
duplicates code a lot and makes it harder to read.
In this commit, new `Compose.old_compose_path` is introduced and
used instead of direct calls of `find_old_compose`.
Signed-off-by: Jan Kaluza <jkaluza@redhat.com>
If Koji pungi-buildinstall is used, then the buildinstall results are
stored in the `output_dir` dir, but in "results" and "logs" subdirectories.
We need to move them to final_output_dir.
Signed-off-by: Jan Kaluza <jkaluza@redhat.com>
We would like to start generating the buildinstall phase using the safer
Koji Pungi Buildinstall plugin and stop the direct use of Runroot plugin.
The plugin so far exists only as PR for Koji:
https://pagure.io/koji/pull-request/1939
This commit adds support for this plugin when `lorax_use_koji_plugin`
is set to `True`.
Signed-off-by: Jan Kaluza <jkaluza@redhat.com>
There was an attempt to achieve this by customizing --version and
--release arguments for Lorax, but Pungi does not take the [general] and
[release] sections from its .treeinfo. Instead it was always using
release version.
The value from this new option will be put into .treeinfo and used for
--version and --release arguments in Lorax (unless explicitly defined in
lorax_options to another value).
JIRA: COMPOSE-4029
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
When `link_type = "symlink"` is used, the packages are in fact symlinks
to /mnt/koji. When graft points file is generated, the paths in this graft
points file point to symlinks and therefore symlinks are copied into the
generated ISO file instead of real files.
In this commit, the code to generate the graft points file is changed
so it resolves the symlink to real file stored on /mnt/koji. To make
this code safer, it does such resolving only in case the symlink points
outside of `compose.paths.compose.topdir()`. Therefore you can still
generate ISO file with symlink pointing to file stored within the ISO
file itself, although this is not done currently afaik.
The main reason for this is to be able to generate ISO files even
without hardlinks (which would need read-write access on /mnt/koji)
and without copying all the packages from /mnt/koji to local storage.
Signed-off-by: Jan Kaluza <jkaluza@redhat.com>
When pungi-gather (or old pungi) download the packages from repos into
work/$arch/, they are linked to work/global/. This was using link_type
configuration option.
However if that is set to symlink, we get a relative symlink in
work/global/ which is later copied under the compose/ directory. Since
it's a relative symlink, it gets broken by this.
The fix is to hardlink the downloaded packages instead in the first
step. Since both the source and destination are in work/ directory, we
know it's the same volume and hardlinks should work. There is a fallback
to copy just to be sure, but it shouldn't ever be used.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The `runroot_method` now accepts `dict` value with phase name as a key
and runroot method as a value. For backward compatibility, the `str`
value is still supported.
The new `global_runroot_method` option has been added which defines
the runroot method in case it is not set in `dict` in the `runroot_method`.
This commit allows running `createiso` phase locally while keeping the other
phases in Koji.
Signed-off-by: Jan Kaluza <jkaluza@redhat.com>
Theoretically it is possible, and this is the bare minimum of changes
needed to survive such situation. There may be other pitfalls.
Fixes: https://pagure.io/pungi/issue/1309
JIRA: COMPOSE-4016
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Originally the list of solvables for fus was growing with each iteration
and nothing was ever removed. That later changed so that fus iterations
are only done on newly added stuff. It's great for performance, but
means that the last log is not a superset of all others.
To get all dependency problems we need to look into all log files, not
just the last one.
JIRA: COMPOSE-3964
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
When there is an exception in gathering (such as after seeing unsigned
packages in deps method), the exception was lost and the compose
continued to run until it tried to access the result and crashed on
KeyError.
Relates: https://pagure.io/releng/failed-composes/issue/587
JIRA: COMPOSE-3986
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
When running repoclosure as root user, it will use other dir instead of
the one returned by getCacheDir().
For yum, with --tempcache option could let the cache dir returned by
getCacheDir() always be used.
For dnf, there's no such an option and we have to handle it specially.
JIRA: COMPOSE-3922
Signed-off-by: Haibo Lin <hlin@redhat.com>
When probing lookasides for platform definition, we need to make sure it
works for repos specified as HTTP urls. Createrepo doesn't seem to
automatically download the repodata, so we have to help it.
JIRA: COMPOSE-3958
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Each depsolved tree will be using its own cache for fus. This should
still allow for faster loading of metadata after first iteration, but
should prevent errors from using cached files meant for another variant
or architecture. The cache is deleted after the last iteration.
JIRA: COMPOSE-3959
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
All places in the code assume the option to not be required except for
this one line.
An obsolete comment is removed as well.
Relates: https://pagure.io/releng/failed-composes/issue/477
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This is basically collecting all individual extra_files.json and putting
their content into a single location in
compose/metadata/extra_files.json. The file format is part of productmd
1.23.
JIRA: COMPOSE-3831
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Instead of just checking that the repo directory exists, make sure the
repodata subdirectory is in there. If it's missing, then createrepo_c
has nothing to use anyway, and it may help avoid issues.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
A lorax template used for the ostree-installer might need an additional
package dependency (e.g., flatpak to embed a flatpak repository) - add
a config key 'extra_runroot_pkgs' to the ostree installer configuration
to allow supplementing the set of packages installed into the runroot.
Signed-off-by: Owen W. Taylor <otaylor@fishsoup.net>
This should make it possible to only import the library only when it's
really needed.
DNF does not work with libmodulemd v2. If we import libmodulemd2 and
then dnf, the program will just hang forever. We only need DNF in
pungi-gather, where libmodulemd is not needed, and also where we do need
libmodulemd, we don't have DNF.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Add a configuration option to enable skipping some modules found in the
configured tag.
Fixes: https://pagure.io/pungi/issue/1260
JIRA: COMPOSE-3794
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This patch adds a new config option. This is expected to be a name of
subdirectory in the repo with module defaults. If supplied, overrides
from that location are loaded every time defaults are loaded.
This raises the minimal required version of libmodulemd to 2.8.0
JIRA: COMPOSE-3828
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Koji started to create relative symlinks to images created in various
tasks. We need to check for that and potentially link the actual file.
JIRA: COMPOSE-3822
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Finding variants with particular architecture is not simple. Swapping
the two loops makes it faster, and additionally it fixes to correctly
work with sources.
JIRA: COMPOSE-3787
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This is needed when a compose does not include any modules itself, but
is using a lookaside with modules.
JIRA: COMPOSE-3720
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This is not called anywhere anymore. Instead of merging these package
sets, they exist as separate entities.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This was a workaround to make some packages from the global repo
invisible for depsolving. This is now handled by packages being in
different repos. We can select which repos are enabled at which point.
This achieves the same result, but much faster.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The repo was used to speed up creating lookaside repo from a variant.
This uses a similar approach as createrepo phase: selecting the last
available package set and using that data.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Simply use all existing package set repos as input for the runroot
task. The command line gets a bit long, but the actual behaviour should
remain the same.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
There is no longer a single repo with all packages. This means that the
metadata has to be loaded from another location.
When taking packages from Koji, we can assume that the non-modular
package tag will be processed last. The repo for this tag will be used.
This has better chance of being useful than using a random module.
For repo sources, there is only one package set anyway, so this change
makes no difference.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The cache is now always saved when the repo is created on disk. The
loading procedure in Koji source is updated to look for cache for
correct tag.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The pickled pkgset was only ever used for debug mode. We don't use that
anymore. Let's stop writing files that are not used anywhere.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
With this patch, there should be a separate package set for each tag
that is consumed.
Generally each module will create a separate package set, with the
exception of -devel modules that will be in the same set as their
non-devel version.
Variants no longer need to keep their own package set objects. Instead
they now include a set of package set names that should be used for the
variant. This can replace the whitelist mechanism of deps gather method.
JIRA: COMPOSE-3620
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Once a package set repo is written to disk, let's use this object that
connects the repository path with the mapping of packages.
This change also makes it explicit where the dependency on package set
repos are. In the original codebase, any part of code could generate a
path to the repo, even if that repo has not yet been written.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This name will serve as an identifier for the group of packages.
For Koji package sets, it should the name of the tag from which the
packages come. For package sets based on repos a dummy constant name is
used.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This opens up a path to having multiple package sets in the compose. The
pkgset phase now creates a list of them (although at this time there is
always a single item in that list).
Any consumer of the package sets objects is updated to handle a list.
Generally this means an extra loop.
JIRA: COMPOSE-3620
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
For 'yum' backend, only cache dirs following repoclosure-$COMPOSE_ID-$variant.$arch
name convention are created, e.g. repoclosure-DP-1.0-20190822.t.0-Bar-Tools.x86_64
But for 'dnf' backend, the dir name looks like
repoclosure-$COMPOSE_ID-$variant.$arch-$suffix and there are other files
created, e.g.
repoclosure-DP-1.0-20190822.t.0-Bar-Tools.x86_64-df9fe164317e314e
repoclosure-DP-1.0-20190822.t.0-Bar-Tools.x86_64-filenames.solvx
repoclosure-DP-1.0-20190822.t.0-Bar-Tools.x86_64.solv
JIRA: COMPOSE-2565
Signed-off-by: Haibo Lin <hlin@redhat.com>
If --lookaside option passed to repoclosure command, extra cache dir
will be created and it should be deleted too.
JIRA: COMPOSE-2565
Signed-off-by: Haibo Lin <hlin@redhat.com>
Both pkgset sources use the same logic to create per-arch repos. There
is no reason to have that code in both places.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The data parsed from variants.xml uses a different format that what we
added in `_add_module_to_variant`. This leads to crashes later.
JIRA: COMPOSE-3746
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This was already discouraged to not be used, and is a bad idea in
current setup anyway. Removing this can simplify the code.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Instead of testing its return value. Future version of libmodulemd will
raise an exception instead of returning empty data.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
When libmodulemd is available, but the compose contains no modules, we
don't want to add the modular metadata anywhere. This patch actually
avoids a crash as `ModuleIndex.dump_to_string()` will return `None` if
there is no data.
JIRA: COMPOSE-3662
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Sometimes it's practical not just warn when ISO is larger than expected,
but to also abort the compose.
JIRA: COMPOSE-3658
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
We can avoid parsing source modulemd information since we can get the
same information from the Koji build info.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Historically each variant had a list of modules. This is no longer
needed and can be dropped. We can also stop logging the modulemd since
we know it was retrieved from Koji and not modified locally.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
On Python 3 it is not possible to sort str and None or RpmWrapper.
First convert everything to strings and then sort it. The sorting is
really to simplify diffing the files, so exact order does not have to be
preserved.
Fixes: https://pagure.io/pungi/issue/1227
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This also cleans up the runroot method detection code to not rely on the
now removed option.
JIRA: COMPOSE-2634
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
If the package set repo contains any modular package, the module
metadata is added there as well.
This is needed to accomodate change in DNF that refuses to work with
repo with modular packages if the metadata is not there. This DNF change
can cause issues in buildinstall phase.
Related: https://bugzilla.redhat.com/show_bug.cgi?id=1623128
The hybrid solver is modified to not create a separate repo with the
module metadata anymore, since it will be available in the repo with
packages. This also allows us to drop code to look into lookaside repos.
We still need to iterate over local modules in order to find out what
platform should be used.
JIRA: COMPOSE-3621
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Haibo Lin
Lubomír Sedlář
Buvanesh Kumar
Jan Kaluza
Owen W. Taylor