This was already discouraged to not be used, and is a bad idea in
current setup anyway. Removing this can simplify the code.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
If the validation or dumping script is given some options, they should
only be removed if they are not valid. We have to remove the invalid
ones, otherwise that would cause a warning about unknown options.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
When trying to validate a template that should later be filled in with
`pungi-config-dump`, there will be errors about undefined variables.
These are meant to be set when the template is populated.
This patch adds support for `-e`, `--define` argument to the validation
script that can be used to suppress these errors.
Alternatively a JSON file is read from the directory with config file
that can contain values for the variables.
The `--define` option is changed in both validation and dumping to allow
empty string as an accepted value.
JIRA: COMPOSE-3599
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
In a real compose this would be a blocker issue and the compose would be
aborted, but for validation it may make sense to continue. Instead of
crashing, let's report a clear warning.
JIRA: COMPOSE-3606
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Clone the main config, all referenced parts and included variants or
comps files.
This requires a new argument: destination directory to which to write
the copied files.
JIRA: COMPOSE-3289
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Instead of running the copy from the main script explicitly, make it
part of the thread.
This should make things very slightly faster, and the code is much
simpler.
Fixes: https://pagure.io/pungi/issue/959
JIRA: COMPOSE-2604
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This can be used to fill particular values to a predefined template
without editing any file disk.
JIRA: COMPOSE-3316
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Use a method to add repos that will apply $arch and $basearch
substitution automatically. Yum backend only applies $basearch, so if
compatibility is needed, that one should be used.
Drop code for handling mirrorlist, since Pungi does not ever use it, and
being used externally is not really supported.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
When a phase is started or stopped, add a line to the to output. This
should help users keep track of what is happening in case the part takes
a long time to run.
JIRA: COMPOSE-3287
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Accept similar argument to pungi-koji: either direct event ID, or a path
to a compose from which the event will be extracted.
It would be nice if we could reuse the path to compose given as source,
but there may be more that one compose, so ultimately we need a way to
overwrite it anyway.
JIRA: COMPOSE-3278
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This patch does not do any actual pushing. It will only extract data
about push targets from the main configuration and store it together
with exact Koji NVR in a well-defined location, and also send the data
to message bus for another service to handle.
JIRA: COMPOSE-3228
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
It may make sense to break a big compose into smaller chunks that can be
done independently. This script allows describing the smaller parts,
runs them with correct dependencies and arranges the result to look like
a single big compose.
All parts use the same koji event, that is either obtained from Koji, or
from command line argument.
JIRA: COMPOSE-2654
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The script can either take config from an existing compose, or load
files by path. By default it will perform full validation (and add
default values and resolved git references). This can be turned off.
The final JSON is printed to stdout.
JIRA: COMPOSE-3066
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Instead of multiple places handling the same thing duplicating the
logic, it's better to do it once upfront. This allows easy caching of
the results.
Additional advantage of this approach is that the config dump will
include resolved URLs. The original reference will still be available in
the copy of the original config.
JIRA: COMPOSE-3065
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This makes it hard to programatically access the dump.
The timestamp was included originally to make sure that restarting a
compose in debug mode will preserve all configs. However we don't really
support that usecase anyway.
JIRA: COMPOSE-3063
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The environment in comps for a variant can refer to groups in parent
variant (either for addons, or because of other configuration). We
should not remove the groups in this case.
This requires changes in two places:
* teaching `comps_filter` about groups that should not be removed
* fixing writing comps so that it does not actually change the data as
well
JIRA: COMPOSE-2612
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
If there is no new commit in the repo, we should not wait for a
signature, as there is nothing to sign.
Fixes: https://pagure.io/pungi/issue/1046
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
If the variants file is invalid, we want to report the errors. If we
fail to load the file at all, that is fine.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This fixes a case where extra packages are pulled in.
The scenario is:
* there's a lookaside repo which contains group G which has package P
* we want to pull group G into the compose, but our definition of G
does not contain P
* lookaside repo does not contain package P
* current package set has P
DNF depsolver will then merge the two definitions and try to get all the
packages. For most cases this is not a problem, since the package is in
the lookaside repo and will not be pulled into the compose. But in the
example above since P is not in lookaside, Pungi will put it into
current compose.
This is also ugly in the depsolving log says it includes package P
because it was in input. But checking comps file does not show it.
The result of this change is that some packages might disappear from
current composes. This can only happen if there is a lookaside which
defines groups with similar IDs, which should be very rare. In cases
where this would be a problem the fix is to explicitly add wanted
packages either to comps or to additional packages.
Fixes: https://pagure.io/pungi/issue/978
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
When multiple composes are chained, they should reuse the same event.
However it is tricky as the value would have to be passed by hand. This
patch makes it possible to read the value from another compose (the
first one in the chain).
JIRA: COMPOSE-2571
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
It's a bit unfortunate we can't use the logger for printing these, but
there is cyclic dependency: to set up logger, we need Compose object (to
generate path to log file), but to create Compose object we need a valid
config.
JIRA: COMPOSE-2577
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
It checks config file value 'skip_phases' for valid phases names.
Also checks command-line attribute 'skip-phase' of 'bin/pungi-koji'.
JIRA: COMPOSE-2493
Signed-off-by: Ondrej Nosek <onosek@redhat.com>
If the ISO is meant to be bootable but lorax fails, there's no point in
creating the ISO as it will not behave as expected.
Bug: https://bugzilla.redhat.com/show_bug.cgi?id=1574585
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
If the config is syntactically correct, but it contains some issues
discovered in `validate` method of any phase, we need to raise an
exception, not exit immediately.
JIRA: COMPOSE-2431
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
On stdout it gets mixed with listing of gathered packages. This has no
effect in a real pungi-koji run, where both streams are merged into a
single file which is then parsed, but in manual debugging runs it's a
little obnoxious.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Until now only list of top level variants was enough, but for variant
as lookaside we need a dict including even child variants.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
All use cases that are actually used by pungi-koji are tested. There is
missing coverage for
* keeping only items with matching arch
* not reindenting the file
These aren't currently used and should be removed in the future, but
there may be other tools depending on the comps_filter executable.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The code should not live directly in the executable, that makes it very
hard to test.
Other than the move there is no functional change.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Basically everything not on the list is excluded. This has to be applied
before we filter only the latest versions (otherwise we could lose
packages that are on the whitelist).
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
When buildinstall fails, there will be no lorax generated files copied
into the compose directory. However they may still be mentioned in the
.treefile in work/ subdirectory where lorax runs.
To avoid possible issues, we should use the lorax created .treeinfo only
if the run was successful.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Instead use the definition from python-six. Once we drop Py 2 support
completely, we'll just swap underscores with dots.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This should make all tests pass on both Python 2 and Python 3.
Unittest2 is required on Py 2.6 and Py 3.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
