Sometimes the release version can be more specific than what should be
exposed to users of the boot iso.
JIRA: COMPOSE-3295
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This adds new `Runroot` class and new `runroot_method` option which makes
it possible to choose between two currently available runroot methods:
- Local
- Koji
The main goal of this commit is to make it possible to add new runroot
methods in the future and this is the first step in that direction.
Signed-off-by: Jan Kaluza <jkaluza@redhat.com>
Run arbitrary commands before and after the compose.
The example config is updated to generate latest symlink with a
post-compose script. The pre compose script runs always, post compose
runs only if the compose is not doomed.
JIRA: COMPOSE-3288
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
If the configuration sets keytab path and principal, run kinit with
custom cache file, and delete the file at the end of the run.
JIRA: COMPOSE-3288
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Behavior before this change: debuginfo was added based on source RPMs.
Pungi would get all debuginfo for all architectures that include at
least one binary package. This had a consequence that if foo-x.x86_64
and foo-x.i686 from the same built were included, foo-y-debuginfo.i686
would be included despite foo-y only being present for x86_64.
The patch changes this to work on binary package level: for each
included package `x`, check if there is `x-debuginfo` or
`x-debugsource`, and include them. Packages added in this way have to go
through one iteration of the solver, to account for cases such as
`x-libs-debuginfo` depending on `x-debuginfo` (with only `x` starting
this chain).
To make it slightly faster, the invocation of fus is changed to only
process newly added package in each iteration. It should have no effect
on the results, and subsequent iterations are much faster if they don't
process the same stuff again and again.
JIRA: COMPOSE-3247
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The file in old compose does not change, there is no need to load it
again for each tag.
One consequence of this change is that the same cache will be used by
all package sets. They add stuff to the cache as they use it. However
that should not be a problem for the same reason it's okay to use the
cache in the first place. If two packages have the same path, they are
actually the same file and it's okay to reuse the data.
JIRA: COMPOSE-3374
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Also remove the useless listTaggedRPMs call which has been used *only*
to catch the very rare error which happened from time to time when
we used PDC in Pungi few years ago. This rare error is not relevant
anymore now.
Signed-off-by: Jan Kaluza <jkaluza@redhat.com>
If it fails, we can't really tell if it's a transient error or just too
old git client. Fall back to full clone immediately and retry there.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
SOURCE_DATE_EPOCH is preferred over time.time() call in metadata
generation, which makes time.time() mock ineffective. Set
SOURCE_DATE_EPOCH instead of mocking time.time(). This additionally test
if SOURCE_DATE_EPOCH is really used.
Adjust expected output, as SOURCE_DATE_EPOCH is defined without
fractional component.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
If the config is loaded from JSON, we will get list instead of tuple.
The validation rule does not really care whether it's a list or tuple,
it only enforces there are two strings. The definition is renamed to be
a bit more descriptive.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
If the config uses SCM dicts that include branch or tag names, they will
be resolved to specific commit ids.
It goes through the caching resolver. The main motivation for that is to
correctly support the --offline flag. It's highly unlikely there will be
two scm_dicts in the config with the same repo.
JIRA: COMPOSE-3279
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Split out a smaller function that receives a git repo URL and ref and
returns the commit id. The caching resolver class is modified to use
this second function if branch is given to it.
The new function checks if the ref received already looks like a commit
ID, and if so it does not attempt to do anything with it.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Before this patch, there were two code paths: either getting the only
the wanted content by calling git-archive, or cloning the repository and
copying the files.
Both these approaches have the downside of not allowing retriving
content from a specific git commit.
The workaround is to create a new empty repo (in the location to which
we cloned previously), fetching the specific commit to there and then
checking it out.
This supports any commit and works identically for any protocol. The
downside is that all files in that commit will be downloaded. It should
be no worse than the git-clone path, but can result in bigger transfers
than git-archive.
Unfortunately this is only supported with git 2.5+. On older version
fetch will fail with no error message (tested with 1.8.3). This can be
used to fall back to full clone. This fallback is clearly suboptimal in
terms of data transfer, but it should work reliably.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
We run a thread for each task, not one per variant. If there are
multiple containers in a single variant, the logs contain confusing
entries about starting the phase multiple times.
2019-02-28 01:58:54 ... [BEGIN] OSBS phase for variant Foo
2019-02-28 01:58:54 ... [BEGIN] OSBS phase for variant Foo
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Accept similar argument to pungi-koji: either direct event ID, or a path
to a compose from which the event will be extracted.
It would be nice if we could reuse the path to compose given as source,
but there may be more that one compose, so ultimately we need a way to
overwrite it anyway.
JIRA: COMPOSE-3278
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This can be useful for archiving configuration to freeze the koji
package set to a particular event.
JIRA: COMPOSE-3278
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Translate the using configured patterns, and give OSBS a repo file with
that URL.
JIRA: COMPOSE-3290
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
If a repo or install tree is specified as an absolute path on the local
filesystem, we should either translate it using the configured mappings,
or if no mapping matches, it should be return unchanged. A variant name
can not start with a slash, so attempting that translation does not make
much sense.
JIRA: COMPOSE-3290
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The default is the original behaviour. On F30+ a new option should be
added to config to make it work.
Over time as users move to this option (which requires a new enough
version of lorax), the default should be switched and then the option
removed.
Resolves: https://pagure.io/pungi/issue/1126
Merges: https://pagure.io/pungi/pull-request/1128
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This will avoid possible conflicts. The names for parts are chosen by
users, and if we decide to add more options in the future, this can
become handy.
JIRA: COMPOSE-3285
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This patch allows the configuration to express maximum expected size for
ISOs created in createiso and extra_isos phases. If the image is larger
than this limit, a warning is emitted in test phase. The compose itself
is not affected in any way.
JIRA: COMPOSE-2824
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This patch does not do any actual pushing. It will only extract data
about push targets from the main configuration and store it together
with exact Koji NVR in a well-defined location, and also send the data
to message bus for another service to handle.
JIRA: COMPOSE-3228
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
For binary packages the filters are handled at the depsolver level.
However sources and debuginfo is added later in the process, so the
filters have to be explicitly applied.
JIRA: COMPOSE-3114
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
If the hybrid solver is used in a situation where there are modules in
lookaside repo, but not in the compose itself, it will fail to detect
any platform. Since we are already opening the module repodata, we can
retrieve platforms from all modules in there as well.
If there are conflicts (e.g. multiple modules depending on different
platforms), an error will be reported.
JIRA: COMPOSE-3277
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
If there are variants that depend on another, they should be processed
in order to make sure packages from the base variant are linked first.
That way the srpm cache is populated and any package in layered variant
but with source in base will have access to correct epoch information.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
If there are multiple matching configuration blocks, we should take the
value that is defined in the last one, but only if it actually is there.
That's how it works for other options.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This is really an oversight. The list of packages from prepopulate list
should be treated the same as if the packagees were coming from comps or
additional packages.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This should tell lorax what arch to use and avoids fragile detection
based on contents of source repo.
It uses the same logic buildinstall phase uses to get the buildarch.
Related: https://pagure.io/teamsilverblue/issue/67
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
