This is basically collecting all individual extra_files.json and putting
their content into a single location in
compose/metadata/extra_files.json. The file format is part of productmd
1.23.
JIRA: COMPOSE-3831
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
A lorax template used for the ostree-installer might need an additional
package dependency (e.g., flatpak to embed a flatpak repository) - add
a config key 'extra_runroot_pkgs' to the ostree installer configuration
to allow supplementing the set of packages installed into the runroot.
Signed-off-by: Owen W. Taylor <otaylor@fishsoup.net>
It was needed to provide assertItemsEqual method. Starting with Python
3.2, there's assertCountEqual that does the same thing. Six provides a
helper that will dispatch to the existing method. With this change,
unittest 2 is only needed on Python 2.6 to backport the method.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Until now, the behaviour was that all debuginfo from a build would be
included if at least one package with the same arch was included.
This resulted in many debuginfo packages being included even though
their corresponding package was not present.
With this patch, we will always pull in debugsource, but foo-debuginfo
will only be included if foo is included for the same arch. As a
consequence, it is necessary to resolve dependencies of debuginfo
packages. There are cases where foo-debuginfo needs foo-debuginfo-common
for example.
This change means that DNF and YUM backends are no longer identical in
the output. The tests where this is demonstrated are duplicated and
their results are modified.
JIRA: COMPOSE-3823
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Make dummy-bash -> dummy-glibc dependency require archful. This avoids
potential race condition where order of dependency processing can result in
different packages being pulled in. The tests where this could happen are
updated.
Make dummy-glibc-debuginfo depend on dummy-glibc-debuginfo-common.
The filenames for the repo no longer include hash, and sqlite databases are not
generated.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This should make it possible to only import the library only when it's
really needed.
DNF does not work with libmodulemd v2. If we import libmodulemd2 and
then dnf, the program will just hang forever. We only need DNF in
pungi-gather, where libmodulemd is not needed, and also where we do need
libmodulemd, we don't have DNF.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Add a configuration option to enable skipping some modules found in the
configured tag.
Fixes: https://pagure.io/pungi/issue/1260
JIRA: COMPOSE-3794
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This patch adds a new config option. This is expected to be a name of
subdirectory in the repo with module defaults. If supplied, overrides
from that location are loaded every time defaults are loaded.
This raises the minimal required version of libmodulemd to 2.8.0
JIRA: COMPOSE-3828
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
There will be a new log file logs/global/excluding-arch.global.log
Fixes: https://pagure.io/pungi/issue/1251
Signed-off-by: Haibo Lin <hlin@redhat.com>
This was a workaround to make some packages from the global repo
invisible for depsolving. This is now handled by packages being in
different repos. We can select which repos are enabled at which point.
This achieves the same result, but much faster.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The repo was used to speed up creating lookaside repo from a variant.
This uses a similar approach as createrepo phase: selecting the last
available package set and using that data.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Simply use all existing package set repos as input for the runroot
task. The command line gets a bit long, but the actual behaviour should
remain the same.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
There is no longer a single repo with all packages. This means that the
metadata has to be loaded from another location.
When taking packages from Koji, we can assume that the non-modular
package tag will be processed last. The repo for this tag will be used.
This has better chance of being useful than using a random module.
For repo sources, there is only one package set anyway, so this change
makes no difference.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
With this patch, there should be a separate package set for each tag
that is consumed.
Generally each module will create a separate package set, with the
exception of -devel modules that will be in the same set as their
non-devel version.
Variants no longer need to keep their own package set objects. Instead
they now include a set of package set names that should be used for the
variant. This can replace the whitelist mechanism of deps gather method.
JIRA: COMPOSE-3620
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Once a package set repo is written to disk, let's use this object that
connects the repository path with the mapping of packages.
This change also makes it explicit where the dependency on package set
repos are. In the original codebase, any part of code could generate a
path to the repo, even if that repo has not yet been written.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This name will serve as an identifier for the group of packages.
For Koji package sets, it should the name of the tag from which the
packages come. For package sets based on repos a dummy constant name is
used.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This opens up a path to having multiple package sets in the compose. The
pkgset phase now creates a list of them (although at this time there is
always a single item in that list).
Any consumer of the package sets objects is updated to handle a list.
Generally this means an extra loop.
JIRA: COMPOSE-3620
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
For 'yum' backend, only cache dirs following repoclosure-$COMPOSE_ID-$variant.$arch
name convention are created, e.g. repoclosure-DP-1.0-20190822.t.0-Bar-Tools.x86_64
But for 'dnf' backend, the dir name looks like
repoclosure-$COMPOSE_ID-$variant.$arch-$suffix and there are other files
created, e.g.
repoclosure-DP-1.0-20190822.t.0-Bar-Tools.x86_64-df9fe164317e314e
repoclosure-DP-1.0-20190822.t.0-Bar-Tools.x86_64-filenames.solvx
repoclosure-DP-1.0-20190822.t.0-Bar-Tools.x86_64.solv
JIRA: COMPOSE-2565
Signed-off-by: Haibo Lin <hlin@redhat.com>
Both pkgset sources use the same logic to create per-arch repos. There
is no reason to have that code in both places.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The data parsed from variants.xml uses a different format that what we
added in `_add_module_to_variant`. This leads to crashes later.
JIRA: COMPOSE-3746
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This was already discouraged to not be used, and is a bad idea in
current setup anyway. Removing this can simplify the code.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Sometimes it's practical not just warn when ISO is larger than expected,
but to also abort the compose.
JIRA: COMPOSE-3658
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
We can avoid parsing source modulemd information since we can get the
same information from the Koji build info.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Historically each variant had a list of modules. This is no longer
needed and can be dropped. We can also stop logging the modulemd since
we know it was retrieved from Koji and not modified locally.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
On Python 3 it is not possible to sort str and None or RpmWrapper.
First convert everything to strings and then sort it. The sorting is
really to simplify diffing the files, so exact order does not have to be
preserved.
Fixes: https://pagure.io/pungi/issue/1227
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This also cleans up the runroot method detection code to not rely on the
now removed option.
JIRA: COMPOSE-2634
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
If the package set repo contains any modular package, the module
metadata is added there as well.
This is needed to accomodate change in DNF that refuses to work with
repo with modular packages if the metadata is not there. This DNF change
can cause issues in buildinstall phase.
Related: https://bugzilla.redhat.com/show_bug.cgi?id=1623128
The hybrid solver is modified to not create a separate repo with the
module metadata anymore, since it will be available in the repo with
packages. This also allows us to drop code to look into lookaside repos.
We still need to iterate over local modules in order to find out what
platform should be used.
JIRA: COMPOSE-3621
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
If the validation or dumping script is given some options, they should
only be removed if they are not valid. We have to remove the invalid
ones, otherwise that would cause a warning about unknown options.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
When trying to validate a template that should later be filled in with
`pungi-config-dump`, there will be errors about undefined variables.
These are meant to be set when the template is populated.
This patch adds support for `-e`, `--define` argument to the validation
script that can be used to suppress these errors.
Alternatively a JSON file is read from the directory with config file
that can contain values for the variables.
The `--define` option is changed in both validation and dumping to allow
empty string as an accepted value.
JIRA: COMPOSE-3599
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This patch reuses the existing createrepo_num_threads options to limit
maximum number of parallel createrepo processes.
Fixes: https://pagure.io/pungi/issue/955
JIRA: COMPOSE-2575
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Starting tests just to run mock functions slows the tests down for no
good reason. Let's instead mock the runner and run the dummy tasks
serially.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Higher protocols should be more efficient in terms of performance and
storage size. Since we don't really care about interoperability with
different python version, we can safely go to the highest version.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Since there can be multiple tags, the check must be done once for all of
them at the same time. Otherwise any module found only in some and not
all tags would raise this error.
The code builds a set of all existing patterns and then removes items
from it. If there is something left once all tags are processed, it
means such patterns were not matched by anything.
JIRA: COMPOSE-3609
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
For scm dict resolving the return value should be git ref (or source
branch for offline mode).
JIRA: COMPOSE-3614
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
We need to update the source modulemd to match what we want. For most
modules the name will be correct already, but in case of devel modules
the original name will still be present there.
Fixes: COMPOSE-3596
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This patch fixes some issues with inconsistent use of whitespace. It
only modifies lines that do not contain any code to not break git blame
too much.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
It's created in runroot, the owner and permissions should be updated so
that anyone can read it and user running compose can delete the files.
JIRA: COMPOSE-3545
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The directory with logs should have updated owner and permission as
well as the actual output. This patch lays foundation for that by
allowing multiple paths to be specified.
JIRA: COMPOSE-3545
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This reverts commit ac15f21135.
It is still needed if nodeps gather method is used. It simply returns
all packages listed in all modules.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1708661
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Instead of validating both variants exist, let's just check the
existence of only the variant that is being used as a lookaside.
If the configuration says Foo depends on Bar, the error is reported only
if Foo exists but Bar does not. Any other situation is silently ignored.
JIRA: COMPOSE-3393
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Instead of guessing based on a good enough name, we can use
`sys.executable` and get path to current python.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The script is run as a standalone process. Anything printed to stderr
breaks the test.
Since Python 3.8, we are getting warnings about invalid escape sequences
in some modules that are imported but not owned by us.
This patch should silence the warnings.
Relates: https://bugzilla.redhat.com/show_bug.cgi?id=1698514
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
- Pass the runroot_tag to init command in OpenSSH Runroot method.
This is needed for the init command as a source for initial packages
for the buildroot.
- Rename the "runroot_ssh_init_command" to "runroot_ssh_init_template"
to make it consistent with the rest of "runroot_ssh_*" options.
- Add missing "runroot_ssh_*" options to checks.py.
- Use chmod/chown to `output_dir` in OpenSSH Runroot method the same way
as it is used in Koji runroot method to make the runroot output readable
for Pungi user.
Signed-off-by: Jan Kaluza <jkaluza@redhat.com>
Instead of running the copy from the main script explicitly, make it
part of the thread.
This should make things very slightly faster, and the code is much
simpler.
Fixes: https://pagure.io/pungi/issue/959
JIRA: COMPOSE-2604
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
If the repo contains the same name under multiple directories, make the
resolving work by filtering only to refs/heads and refs/tags.
Fixes: https://pagure.io/pungi/issue/1180
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The prefix checking only works if there are no streams that would share
prefixes. Let's instead check the value as a whole. There is extra
complexity from the fact that version and context may not be specified.
The stream as specified in input is processed to replace dashes (`-`)
with underscores (`_`) to match how the builds are imported into Koji.
JIRA: COMPOSE-3547
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This adds few new config options which are well described in the
configuration documentation. Please refer to it for more information.
Merges: https://pagure.io/pungi/pull-request/1170
Signed-off-by: Jan Kaluza <jkaluza@redhat.com>
Embedding the registry configuration into OSBS config itself is
simple, but makes it impossible to reuse the same configuration for
multiple different composes.
A nice example is a nightly pushing images to a testing registry, and
production compose building the same images but pushing to staging
location. The original design requires duplication of all the
configuration just because registries are different.
With this option, the push information is stored in a separate option as
a mapping from NVR patterns to arbitrary data. The patterns are used to
match finished builds to registry.
The old configuration is marked as deprecated in code and will
eventually be removed. The deprecation handling in config validation
does not allow emitting warnings for nested values.
JIRA: COMPOSE-3394
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The parts in multi compose are now named reasonably.
The package set repos are selected only once and not per variant. We
can't use repos with packages for specific arch only as that would
require more transformations during generating test data.
Lookasides for ResilientStorage part are added to point to Server part.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Tests are not passing in Fedora builds with this code, since it was
deleted in DNF. I think it's not actually doing anything, so we should
be able to drop it as well.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
A module build can create packages that are tagged in the content tag,
but should not be included in the module. Originally Pungi didn't know
what exactly the module contains and so it needed to apply filters to
exclude stuff that was definitely out.
With getting the final MMD from Koji, we can actually make this a bit
more strict by only keeping packages that we know we need.
When processing each content tag, we can put into package set only
packages that are included in some module using that tag. This should
work with -devel modules as well. Both the regular and -devel modules
will contribute to the set and thus all packages will go to the package
set.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This source does not really return anything useful. It was necessary to
process the source modulemd to fill in list of RPMs. Since we now get
the final files from Koji, this is not needed anymore and the source can
be dropped.
This change requires a lot of tweaks for test.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The file we get from Koji has all important bits already filled in.
There is no need to add anything.
This patch also stops filtering the artifacts to only contain packages
that are actually in the repo. Thus debuginfo and source packages will
appear there.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Instead of loading the "source" modulemd, always get the final file for
each architecture from Koji.
Logging the downloaded files locally is no longer necessary, when
debugging a problem we can find the files in the respective builds in
Koji.
Tests are updated to work with new code, and an obsolete test is
removed.
JIRA: COMPOSE-3147
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Sometimes the release version can be more specific than what should be
exposed to users of the boot iso.
JIRA: COMPOSE-3295
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This adds new `Runroot` class and new `runroot_method` option which makes
it possible to choose between two currently available runroot methods:
- Local
- Koji
The main goal of this commit is to make it possible to add new runroot
methods in the future and this is the first step in that direction.
Signed-off-by: Jan Kaluza <jkaluza@redhat.com>
Run arbitrary commands before and after the compose.
The example config is updated to generate latest symlink with a
post-compose script. The pre compose script runs always, post compose
runs only if the compose is not doomed.
JIRA: COMPOSE-3288
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
If the configuration sets keytab path and principal, run kinit with
custom cache file, and delete the file at the end of the run.
JIRA: COMPOSE-3288
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Behavior before this change: debuginfo was added based on source RPMs.
Pungi would get all debuginfo for all architectures that include at
least one binary package. This had a consequence that if foo-x.x86_64
and foo-x.i686 from the same built were included, foo-y-debuginfo.i686
would be included despite foo-y only being present for x86_64.
The patch changes this to work on binary package level: for each
included package `x`, check if there is `x-debuginfo` or
`x-debugsource`, and include them. Packages added in this way have to go
through one iteration of the solver, to account for cases such as
`x-libs-debuginfo` depending on `x-debuginfo` (with only `x` starting
this chain).
To make it slightly faster, the invocation of fus is changed to only
process newly added package in each iteration. It should have no effect
on the results, and subsequent iterations are much faster if they don't
process the same stuff again and again.
JIRA: COMPOSE-3247
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
SOURCE_DATE_EPOCH is preferred over time.time() call in metadata
generation, which makes time.time() mock ineffective. Set
SOURCE_DATE_EPOCH instead of mocking time.time(). This additionally test
if SOURCE_DATE_EPOCH is really used.
Adjust expected output, as SOURCE_DATE_EPOCH is defined without
fractional component.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Split out a smaller function that receives a git repo URL and ref and
returns the commit id. The caching resolver class is modified to use
this second function if branch is given to it.
The new function checks if the ref received already looks like a commit
ID, and if so it does not attempt to do anything with it.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Before this patch, there were two code paths: either getting the only
the wanted content by calling git-archive, or cloning the repository and
copying the files.
Both these approaches have the downside of not allowing retriving
content from a specific git commit.
The workaround is to create a new empty repo (in the location to which
we cloned previously), fetching the specific commit to there and then
checking it out.
This supports any commit and works identically for any protocol. The
downside is that all files in that commit will be downloaded. It should
be no worse than the git-clone path, but can result in bigger transfers
than git-archive.
Unfortunately this is only supported with git 2.5+. On older version
fetch will fail with no error message (tested with 1.8.3). This can be
used to fall back to full clone. This fallback is clearly suboptimal in
terms of data transfer, but it should work reliably.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Translate the using configured patterns, and give OSBS a repo file with
that URL.
JIRA: COMPOSE-3290
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
If a repo or install tree is specified as an absolute path on the local
filesystem, we should either translate it using the configured mappings,
or if no mapping matches, it should be return unchanged. A variant name
can not start with a slash, so attempting that translation does not make
much sense.
JIRA: COMPOSE-3290
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The default is the original behaviour. On F30+ a new option should be
added to config to make it work.
Over time as users move to this option (which requires a new enough
version of lorax), the default should be switched and then the option
removed.
Resolves: https://pagure.io/pungi/issue/1126
Merges: https://pagure.io/pungi/pull-request/1128
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This will avoid possible conflicts. The names for parts are chosen by
users, and if we decide to add more options in the future, this can
become handy.
JIRA: COMPOSE-3285
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This patch allows the configuration to express maximum expected size for
ISOs created in createiso and extra_isos phases. If the image is larger
than this limit, a warning is emitted in test phase. The compose itself
is not affected in any way.
JIRA: COMPOSE-2824
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This patch does not do any actual pushing. It will only extract data
about push targets from the main configuration and store it together
with exact Koji NVR in a well-defined location, and also send the data
to message bus for another service to handle.
JIRA: COMPOSE-3228
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
For binary packages the filters are handled at the depsolver level.
However sources and debuginfo is added later in the process, so the
filters have to be explicitly applied.
JIRA: COMPOSE-3114
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
If there are multiple matching configuration blocks, we should take the
value that is defined in the last one, but only if it actually is there.
That's how it works for other options.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This is really an oversight. The list of packages from prepopulate list
should be treated the same as if the packagees were coming from comps or
additional packages.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This should tell lorax what arch to use and avoids fragile detection
based on contents of source repo.
It uses the same logic buildinstall phase uses to get the buildarch.
Related: https://pagure.io/teamsilverblue/issue/67
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
It may make sense to break a big compose into smaller chunks that can be
done independently. This script allows describing the smaller parts,
runs them with correct dependencies and arranges the result to look like
a single big compose.
All parts use the same koji event, that is either obtained from Koji, or
from command line argument.
JIRA: COMPOSE-2654
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
We already make this possible for the ostree installer, but it was
missing from the traditional one. The default behaviour is to let lorax
decide, but if user knows better, they can overwrite in configuration.
JIRA: COMPOSE-3188
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Instead of multiple places handling the same thing duplicating the
logic, it's better to do it once upfront. This allows easy caching of
the results.
Additional advantage of this approach is that the config dump will
include resolved URLs. The original reference will still be available in
the copy of the original config.
JIRA: COMPOSE-3065
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This should be on top level of the ISO, and list files added
specifically to the ISO. If there's anything inherited from one some
variant, the files will be listed in metadata in the variant directory.
JIRA: COMPOSE-3069
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The files created in runroot task are owned by root by default (because
that's who is running the processes to create them). Making the results
world readable allows the compose to work, but it still can be difficult
to clean up old composes if they contain random files owned by root.
Fixes: https://pagure.io/pungi/issue/1039
JIRA: COMPOSE-2906
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Currently the `copy_all` function resolves all symlinks and crashes on
broken symlinks. Instead it should copy symlinks as symlinks.
Fixes: https://pagure.io/pungi/issue/1084
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
yaml.load is equally powerful as python pickles, and we don't
need that level of power for the ostree yaml files.
Better safe than sorry.
Signed-off-by: Patrick Uiterwijk <patrick@puiterwijk.org>
They are not always wanted, so let's not include them by default.
There's a new option to include the same files that extra files phases
uses, or alternatively they can be configured specifically and put into
the variant subdirectory.
JIRA: COMPOSE-3084
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Up to now it was possible to change the pattern for all images, but
there are use-cases where different variants might want different names.
For example there could be one main variant that should only have
product name in the ISO filename, but addons should still be marked with
variant name.
JIRA: COMPOSE-3041
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The environment in comps for a variant can refer to groups in parent
variant (either for addons, or because of other configuration). We
should not remove the groups in this case.
This requires changes in two places:
* teaching `comps_filter` about groups that should not be removed
* fixing writing comps so that it does not actually change the data as
well
JIRA: COMPOSE-2612
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The initial implementation is very coarse. It enables it for all
variants and all modules. That is not always wanted.
With this patch, the config file has to explicitly list the devel
modules for each variant that should have it. The variant must be
configured also to include the non-devel module (but the module may be
in lookaside so it won't be included).
We now include module metadata in the internal lookaside repo, so that
this whole thing works if one variant is built on top of another.
JIRA: COMPOSE-3034
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
When the configuration lists `*` in `additional_packages`, it has a
special meaning. If it's passed to fus directly, it will use it to match
all modules and RPMs that are not masked by a package available in some
default stream. Neither is good. We don't want it to match modules, and
we want even the masked packages.
The fix is to expand the wildcard to a list of NVRs and give that to
fus. It should include the package even if it is masked.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
There is no repoclosure that correctly understands modules. The best
thing we can offer is the errors reported by the depsolver.
JIRA: COMPOSE-2321
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Stream can contain dash sign and when MBS imports such NSVC to Koji, the
dash is replaced with underscore. The current Pungi code does not
respect that and tries to use the stream from Koji directly, which
results in wrong stream being using in some Pungi internal data.
In this PR, the NSVC is taken from module metadata section of CG Koji
build, which contains real stream including the dashes.
Merges: https://pagure.io/pungi/pull-request/1072
Signed-off-by: Jan Kaluza <jkaluza@redhat.com>
Without this we don't have artifacts from all modules when the first
modular variant is solved. That makes some modular packages appear as
bare.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
If there are two variants with different module sets, the missing
modulemd from variant B causeing depsolving in variant A to consider the
packages as non-modular. That is wrong.
Related: https://bugzilla.redhat.com/show_bug.cgi?id=1640125
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Instead of having one giant command line, write the long list into a
file and pass that to the solver.
The items on the input list are sorted for easy processing.
JIRA: COMPOSE-3012
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
If the file is generated, Pungi will modify it at the end of
buildinstall phase. We need to point ISO creation to the modified file,
otherwise the checksum in .treeinfo will be incorrect.
It's sufficient to just update the graft point to correct file, copying
is not needed.
JIRA: COMPOSE-2976
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The function loads existing treeinfo, removes reference to boot.iso and
adds [media] section. This is the basic tweak that should happen for all
ISOs. Additional changes depend on the actual content.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
It's possible we ask to include module X, but it's in lookaside and as
such it should not be in the output. Therefore we need to remove it from
the variant.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
By default nothing should change. This patch adds a new config option
that enables all this new craziness:
* it turns of applying module filters at pkgset level
* it creates new modules and adds them to the compose
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The module has same S:V:C, but the name is suffixed with `-devel`. The
module should contain all packages from the module koji tag that were
not included in the actual module.
The devel module has the same dependencies as the regular module, but
also additionally depends on the original module. The API and profiles
are cleared in the new module.
In the metadata it shows the same koji tag.
The test if package goes to the module is refactored to a function to
make work with the negated case a bit easier.
There may be unneeded multilib packages in the -devel module, because
there might be buildtime dependencies between things that we don't see.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Clear API and profiles
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This works around a bug where fus prioritizes first repo and thus could
include packages even if they were in lookaside.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The main variant is already available, this patch adds information about
additional variants that are included in the image.
JIRA: COMPOSE-2917
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
There's an environment variable that can suppress printing of PID for
every debug message. It provides us with no real information and only
makes the log larger.
JIRA: COMPOSE-2973
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Only local paths are supported currently. As such, `file://` can be
stripped, and for anything else we should raise an exception.
JIRA: COMPOSE-2996
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This PR adds new pkgset_koji_builds configuration option.
This option allows setting list of extra Koji build NVRs which will be
included in a compose. This is useful in two cases:
a) It allows generating standard composes with few packages update to
certain version to test how the compose behaves when the package is
updated for real.
b) It allows generating compose consisting only from particular builds
when pkgset_koji_tag = '' or None. This is useful when one want to
regenerate the compose with packages which are not tagged in single Koji
tag. This is very useful for ODCS when reproducing old composes.
Merges: https://pagure.io/pungi/pull-request/1049
Signed-off-by: Jan Kaluza <jkaluza@redhat.com>
There are three different cases:
* we expect commitid and it's there
* we expect commitid and it's missing
* we don't expect commitid
This patch helps differentiate between the second two. In former one we
should report an error and mark the phase as failed. The latter is
perfectly fine and no error should be reported
Fixes: https://pagure.io/pungi/issue/1046
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
There can be multiple modules with the same name and stream. They should
all have the same version, but will have different contexts. Fus takes
only N:S as input, but should pull in all matching modules. We just need
to give it correct data in the repo.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This patch changes the behaviour when both module tag and NSV?C? is
specified. The NSVC are used as a whitelist and only matching modules
will be included in the compose.
Additionally this patch adds filtering based on inheritance: when
finding the latest module for each N:S combination, only the top tag in
which the module is tagged is used. Even if a newer build is available
somewhere deeper in the inheritance, it's not going to be used.
Example inheritance and tagged modules
f29-compose (foo:1:2018:cafe)
└─ f29-candidate (foo:1:2019:cafe)
The compose will use 2018 version, because it's in the topmost tag.
JIRA: COMPOSE-2685
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
In the search result, we should ignore any module build that finished
after the event that we are working with.
Fixes: https://pagure.io/pungi/issue/999
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
If the same tag is queried with the same event, Pungi can cache the
response and call the API again. Particularly for small composes this
can save up significant amount of time.
Merges: https://pagure.io/pungi/pull-request/1022
Signed-off-by: Jan Kaluza <jkaluza@redhat.com>
If we're running in debug mode and the file is already present, it
should not be modified. This means that in order to rerun the actual
gather phase the file needs to be manually deleted first. However the
much more common use is to skip gather phase (because only images should
be re-run). In that case the manifest will be preserved correctly.
JIRA: COMPOSE-2756
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
If the configuration specifically excludes a variant from buildinstall,
but does not also disable ISO creation, we should just create a
non-bootable ISO instead of reporting a warning.
JIRA: COMPOSE-2887
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The tests create empty directories in current working directory, but
they never clean them up. Instead we can switch to a temporary location
that will be cleaned up automatically.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The file is not being included in the source tarball, which breaks
internal jenkins and will eventually cause the test to fail at RPM build
time.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
On some systems we need to use python3, in other places it can be
another version. Instead of guessing, let's look at shebang line in
lorax executable and use the same.
JIRA: COMPOSE-2852
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This could be used to enable zchunk generation, which can require up to
4 different options. Instead of hardcoding every single one, let's just
allow more direct access to the executed command.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Fus returns also RPMs in modules, but until latest version it only
worked if the package was in the same repo as the metadata. This changed
in latest version and now Pungi does not need to expand the list
anymore.
JIRA: COMPOSE-2779
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This was not configurable for users, and the default was always used,
which meant no escaping. Might as well just remove the dead code.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This will be used by Anaconda to consume multiple repos for
installation.
JIRA: RCM-36970
JIRA: COMPOSE-2753
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Fixup
Comps file specifies a pattern for some packages. If that package is
installed, all packages matching the pattern are added as well. This can
be added to fus as another pass.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The configuration for modules has changed.
Lookaside handling has changed, and there are now test failures. This
is a not a bug in DNF, so we need to fix it on our side.
Relates: https://bugzilla.redhat.com/show_bug.cgi?id=1603123
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This makes it possible to run a compose as non-root user, plus removes
the need for workarounds to publish the results directly.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
It does not abort the compose, but it's still an error. It should be
marked as such in the log. This will allow easier searching for the
failures.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This patch adds a new gather method called `hybrid`, which uses a `fus`
binary, which must exist somewhere on the `$PATH`. It will call it
multiple times to add multilib packages.
The solver can handle packages, modules and comps groups as input.
However comps groups are never passed in. Pungi will expand it to a list
of packages to avoid issues with comps handling in fus. It ignores
optional packages, and if the group mentions a package that does not
exist, nothing else from the group is included.
Multilib is also handled outside of fus. Pungi will run it, parse the
packages from output, determines multilib packages and adds them as
input. Then it runs the solver again. This is done until nothing new is
added. Usually two passes should be enough.
Source packages and debuginfo are added as a final step. All debuginfo
packages from any included source are added. If the source or debuginfo
package is included in any lookaside repo, it will be skipped.
The tool expects to get a platform stream that should be provided for
modules to depend on. Pungi looks into the modules and gets the platform
from there. If there are more requests, an error is raised.
There is some missing functionality and options that are ignored.
Particularly these are:
* gather_fulltree
* gather_selfhosting
* greedy_method
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
And include variant in repo file name. The whole path is unique already,
but not the filename itself.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
We can specify !VERSION_FROM_VERSION in version field during
image_build to expand it to correct release number without any label
information.
Also implemented !RELEASE_FROM_DATE_RESPIN to provide correct
release number. This helps to keep Atomic Host media files name
produced by image_build during bodhi updates compose run
consistent with nightly run.
Fixes: https://pagure.io/pungi/issue/987
Merges: https://pagure.io/pungi/pull-request/995
Signed-off-by: Sinny Kumari <sinny@redhat.com>
If a module says to filter a package out, we can do it immediately when
getting the build information from Koji.
This avoids a possible problem of something pulling the module package
in as a dependency, but it should also make the package set slightly
smaller.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
If a package name contains leading or trailing whitespace, it will
eventually lead to issues: pungi will try to include that group, but
since it does not exist, the packages will not make it in.
The root cause is hard to find. Better report an error immediately.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
If a file has multiple hard links, genisoimage will put the wrong number
on the ISO. This patch can work around it by copying hard-linked files
into a temporary staging directory.
JIRA: COMPOSE-2610
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
PDC is deprecated in upstream. The usecase for getting list of modules
by NS, NSV or NSVC can however be satisfied by querying modules imported
into Koji.
This makes it possible to deprecate PDC configuration.
Merges: https://pagure.io/pungi/pull-request/985
Signed-off-by: Martin Curlej <mcurlej@redhat.com>
If there is leading or trailing whitespace in a comps group name, it
will not be included in the compose and there will even be no error
message. Whitespace on module name results in a failure.
To avoid these errors, validating the variants file will now also check
that there is no whitespace in significant places, and abort the compose
if there a problem.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
After cloning the repository with defaults, open each file and try to
check if there is more than one definition for the same module. It's not
a problem for the compose process, but consumers of the compose would
get confused and possibly explode. Better alert people early.
Conceptually this should be part of the test phase, but that would mean
waiting for the compose to finish before reporting the error. The
earlier the better.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
When the compose is not using comps, we can't pass the comps to lorax,
since it doesn't exist and it would cause a crash.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
When multiple composes are chained, they should reuse the same event.
However it is tricky as the value would have to be passed by hand. This
patch makes it possible to read the value from another compose (the
first one in the chain).
JIRA: COMPOSE-2571
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The commands in runroot run as root every time. If they create files
that are not readable to other users, the reset of compose could have
problems with it if it does not run as root too. Particularly updates
composes in Bodhi run under apache user.
Relates: https://pagure.io/pungi/issue/932
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
All the components are there already separately, but having the full NVR
should simplify searching the metadata with grep.
JIRA: COMPOSE-2519
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This is an optimization for Yum. DNF does not care at all.
The behaviour is configurable, but the default depends on gather
backend, as that is what users should be using to consume the packages
from the repo.
Fixes: https://pagure.io/pungi/issue/951
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
It should not be needed there, since the repo is empty anyway. A test is
added for the variant specific comps repo.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This is used for mapping basearch to binary arch.
One use for this is when running depsolving to tell yum/dnf what arch to
work with. With this change it will get i686 instead of athlon when
working on i386 basearch.
The other use case is finding arches compatible with given basearch. The
change will remove athlon from the list for i386.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This should give us better error reporting. The `copy_all` function
should preserve permissions on all files.
Relates: https://pagure.io/pungi/issue/932
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
