Modular variants can either be specified by a list of modules, or by a
list of Koji tags. In terms of comps preprocessing there should not be
any difference between the two.
Resolves: https://pagure.io/pungi/issue/1640
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Since version 9, the `koji-osbuild` plugin supports specifying upload
options as part of a Koji build. This enables one to upload the built
image directly to the cloud environment as part of the image build in
Koji.
Extend the configuration schema with `upload_options`.
Extend the documentation and describe valid `upload_options` values.
Add a unit test testing a scenario when `upload_options` are specified.
Signed-off-by: Tomas Hozza <thozza@redhat.com>
Modify the osbuild configuration schema to accept only an array with a
single value as the `image_types`, in addition to a single string. The
single string was supported by the schema also before, but this fact was
not mentioned in the documentation, nor it was supported by the
`koji-osbuild` plugin of version lower than `9`.
Update the documentation accordingly.
Add unit test for invalid configuration containing more than one image
type.
Signed-off-by: Tomas Hozza <thozza@redhat.com>
In order to start building Fedora IoT images with osbuild, we need to be able
to pass ostree options from pungi to the koji's osbuildImage task.
This commit adds support for it via new configuration options: ostree_url,
ostree_url and ostree_parent.
A test was added to cover these new options and they are were also added
into the documentation.
JIRA: COMPOSER-1702
Merges: https://pagure.io/pungi/pull-request/1624
Signed-off-by: Ondřej Budai <ondrej@budai.cz>
Use a different approach for building DVDs when xorriso is enabled.
The default of using genisoimage is not changed at all. When the config
option is set to use xorriso, the actual execution is different between
bootable and non-bootable images.
The non-bootable images are still created by running xorrisofs (which is
a compatibility tool with same UI as genisoimage). Since the image is
not bootable, there should be no problems with boot options.
For bootable images, Pungi will instead take the boot.iso generated by
Lorax, and use xorriso to inject all the extra files into the image.
The shell script that used to invoke all the commands to build the ISO
now runs the `xorriso` command in interactive mode and feeds another
file into it. The new file contains the xorriso commands to add the
required files to the image.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
- Remove validation for modules obsoletes
We can have multiple obsoletes for one module
- Add unit tests to cover basic scenarios for
modules defaults && obsoletes
- Add additional check for invalid yaml file
in Defaults. Previously, empty list of default would
be returned when invalid yaml is present in Defaults
directory.
- Using MergeIndex for Obsoletes only (for now).
https://pagure.io/pungi/issue/1592
Signed-off-by: Marek Kulik <mkulik@redhat.com>
When looking for task ID in output of koji runroot command, do not check
just the first line. Instead look for first line that contains just a
number.
Most of the time, this should really be the first line. But if koji
client decides to print any warnings, this patch should skip that.
JIRA: RHELCMP-8944
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Prior to this change, if a container image used Cachito with OSBS, then
OSBS would store additional "remote-sources" files in the Koji archives
for the build. Pungi cannot parse the metadata for these archive
entries, so it would crash in add_metadata():
File "pungi/phases/osbs.py", line 81, in process
self.worker(compose, variant, config)
File "pungi/phases/osbs.py", line 141, in worker
nvr, archive_ids = add_metadata(variant, task_id, compose, scratch)
File "pungi/phases/osbs.py", line 447, in add_metadata
arch = archive["extra"]["image"]["arch"]
KeyError: 'image'
Tell Koji to only return container image archives, and ignore these
remote-source archives.
Signed-off-by: Ken Dreyer <kdreyer@redhat.com>
Clone the directory to the compose tmp directory
Update the test_scm in order to create real Compose object. Mock objects are not allowed
to create/delete files for preventing multiple clones
JIRA: RHELCMP-5250
Signed-off-by: Ozan Unsal <ounsal@redhat.com>
This should cover case where we there's a build like this:
foo-1-1.src.rpm
foo-sub-1-1.noarch.rpm
foo-debugsource-1-1.x86_64.rpm
The compose contains the noarch package, and should also have the
debugsource package. The original code only checked for
foo-sub-debugsource though.
JIRA: RHELCMP-7628
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
With this param, get_dir_from_scm will try to copy the tmp git dir to
compose target dir when error occurs.
This does not fix the issue but it would be helpful for debugging when
it occurs again.
JIRA: RHELCMP-7244
Signed-off-by: Haibo Lin <hlin@redhat.com>
It was checked in a condition together with the configuration value, and
only ever explicitly used with the same value.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
When a compose doesn't build any images, it won't produce any metadata
file for them, and thus it makes no sense to validate it.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Fixes: https://pagure.io/pungi/issue/1565
DNF repoclosure requires this option when checking a repository that is
not compatible with host architecture. It seems that when it is
compatible, it works as well.
Based on how the list of architectures is generated, we know that the
main one will always be first.
Fixes: https://pagure.io/pungi/issue/1562
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
When nothing in configuration or the image itself changed, let's just
copy the older one.
JIRA: RHELCMP-5969
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This patch allows Pungi to reuse ISO image created in previous compose
if a list of assumptions proves to hold:
* If image is bootable, buildinstall phase must have been reused too.
* Compose configuration must have not changed (except for a few
whitelisted options).
* Volume ID of the ISO much not have changed.
* No RPM on the ISO must have changed.
The ISO also contains other files. Changes in extra files and product ID
certificates should be visible in configuration (the SHA will differ).
Similarly any repodata configuration would be reflected in
configuration.
JIRA: RHELCMP-5969
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
When the value is not specified in the configuration file, let Koji pick
the default channel.
JIRA: RHELBLD-8088
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
- Use ModuleIndex's update_from_file/update_from_string instead of ModuleStream's
read_file/read_string which is deprecated.
- Extend tests to work with real module streams instead of mocks.
Signed-off-by: Filip Valder <fvalder@redhat.com>
- The ability is added
- Also the generator includes only the latest by version packages to packages.json
- The generator has key `--is-reference` for an each repo. This key marks a repo as reference.
An reference repo is used as main source of packages. A not reference repo is used as source
of packages which don't exist in the reference repos.
- All cases are covered by the unittest
@BS-NOBUILD
@BS-TARGET-CL8
Change-Id: I2f80ba4fbfce27fb9a30500ae46c0b8a2f2aabcd
- [Fixed] The script `create_packages_json` selects a first
comer package from variant, but it should select the
higher by version of package
@BS-NOBUILD
@BS-TARGET-CL8
Change-Id: I36268f2a493897fc11e787c040066d2d501a1c81
Make sure that the function returns a path even for local files
specified by file:// urls.
JIRA: RHELCMP-5340
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
- The modules from a parsend output of FUS should be have a stream
with replaced dash by underscore
@BS-NOBUILD
@BS-TARGET-CL8
Change-Id: If36d3d0a1ef8010bf85a4a0218b9838e0888453c
- Some modules can be absent in koji env but be present in variants.xml.
And Pungi will fail in this case. So we must filter out those modules
from expected modules list by list from pungi build config
@BS-NOBUILD
@BS-TARGET-CL8
Change-Id: I22c15c42868412e34fd554030130bd7c3e25b8ef
- The script `gather_modules` should replace `-` by `_`
in stream of modules as pungi does it in self
@BS-NOBUILD
@BS-TARGET-CL8
Change-Id: Iea05b70afbf80f3ccd20ad4943c9d86c7ed7aa90
- Do not reuse when there is any external lookaside repo
- Do not reuse when lookaside variant is not reused
JIRA: RHELCMP-4596
Signed-off-by: Haibo Lin <hlin@redhat.com>
The original code ended up downloading all repodata from the lookaside
repo. This could cause a lot of memory to be used.
The new code only downloads the repomd.xml and then primary record,
which is sufficient to obtain all needed information. A lot less memory
is used and the code is also significantly faster.
Here are some alternative ways of getting a list of packages from the
lookaside repo and reasons why they did not work:
* dnf repoquery - this doesn't include modular packages unless the
stream is default
* dnf reposync - requires `--urls` option to only print the names,
which is not available on RHEL 7
JIRA: RHELCMP-4761
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
There are two images because it's hard to install both Python 2
and Python 3 packages (e.g. libcomps) in latest fedora release.
JIRA: RHELCMP-4580
Signed-off-by: Haibo Lin <hlin@redhat.com>
OSBS will reject no scratch builds with arch_override.
When the option is not specified in Pungi, it would do `"".split(" ")`
to get list of arches, which returns a list with empty string instead of
an empty list.
With this fixed, it might be possible to have multiple images match the
spec (unless arch is used in the filter). To fix that, we can replace
arch with $basearch variable.
JIRA: RHELCMP-3824
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Previously commands to adjust permissions do not run when main
command failed and then files can't be cleaned up due to
Permission Denied problem.
JIRA: RHELCMP-4253
Signed-off-by: Haibo Lin <hlin@redhat.com>
The name brings a different expectation than how it actually worked.
This patch makes the code work similarly to the expectation.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
- We are modifying existing repo's .treeinfo:
-- Take info about included variants from iso's .treeinfo and put it to repo's .treeinfo
Change-Id: I29bf655d90994e8a1bda40ad04568dd7364f5dca
- We should add the images to the compose if they will be used only as netinstall image.
E.g. *-boot.iso.
- And we shouldn't add if the images will be modified in phase `extra_isos`.
E.g. *-minimal.iso
Change-Id: I9095cfd87414ecca46b1213553589731c82dd2e2
When a gathering thread raises an exception, it gets forwarded to the
main thread and re-raised there. However, during this transition it
loses details about exact location of the problem.
This patch creates an extended traceback in the worker, which should
make it easier to track the problem down later.
JIRA: RHELCMP-4259
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
If packages are appearing quickly in Koji, and signing them is triggered
by automation, there may be a delay between the package being signed and
compose running. In such case it may be preferable to wait for the
signed copy rather than fail the compose.
JIRA: RHELCMP-3932
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This phase runs after image-build and osbuild and can embed an image
into a container.
JIRA: RHELCMP-3820
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
@BS-TARGET-CL8
@BS-NOBUILD
- It's added the script which can collect packages/modules
from the remote repos (including BS repos) and merge them
to an one local repo with the right repodata (including
modules.yaml.gz)
- The script `create_packages_json` can use regexps for list of excluded packages
Change-Id: I1365b712460959db6bb451d1199d640bff6ffe5e
Rather than tracking this directly in OSBS phase, move this into Compose
object, which will allow access to this from multiple phases.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
- It's added the tool which can generate json like as `centos-packages.json` using repodata from completed repos.
@BS-LINKED-5ffda6156f44affc6c5ea239 # pungi & dependencies
@BS-TARGET-CL8
Change-Id: Ib0466a1d8e06feb855e81fb7160fe170e2e82e04
Instead of koji.mbox use local koji-like wrapper.
@BS-LINKED-5ff8b8cb6f44affc6c5e9a7a
@BS-TARGET-CL8
Change-Id: I82a2bc8bc71ae06240656898f3df71bb28bcb9e9
Tool that finds all available rpm files in directory
and creates special tree for pungi:
# ls /mnt/koji/
i686/ noarch/ x86_64/
Change-Id: Ibcf2d23c46411ad89477058f4d56e07ca117f0d1
Add special tool that gathers given modules.tar.gz files
and collects information about modules into two dirs:
- module_defaults
- modules
First one is used by pungi during repocreate phase and
the second one is used by koji mock to get list of
available modules and their versions.
Change-Id: I50a095a5f3bafa7e7a1effc2c0d4a2fc52ba603b
The task can only fail as a whole, thus it only makes sense to set all
architectures (`*`) as failable. The correct value needs to be checked
though.
JIRA: RHELCMP-3412
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Instead of parsing the log file to get the NVR and then in turn
use that to get to the build info use the structured return value
from the koji task. The return value of the osbuild plugin is:
result = {
"composer": {
"server": <COMPOSER_URL>,
"id": <COMPOSE_ID>
},
"koji": {
"build": <BUILD_ID>
}
}
This means we have direct access to the koji build id, which was
returned by composer to the plugin via its status API. Using that
removes the need to parse the log file.
Adapt the test accordingly.
Merges: https://pagure.io/pungi/pull-request/1475
Signed-off-by: Christian Kellner <christian@kellner.me>
A new configuration *createiso_use_xorrisofs* is added to determine
which tool to use for creating ISOs.
By default, createiso_use_xorrisofs = False and genisoimage will be used.
When set to True, xorrisofs will be used.
JIRA: RHELCMP-2875
Fixes: https://pagure.io/pungi/issue/1130
Signed-off-by: Haibo Lin <hlin@redhat.com>
The pkgset_koji_builds influences the gather phase, but the
change itself is not a reason to not reuse old gather phase. if
new pkgset_koji_builds value leads to significant change in input
package set, we will find that later in this function when comparing
old and new package set.
Signed-off-by: Jan Kaluza <jkaluza@redhat.com>
These methods return command as list which is never serialized to str and
never executed using bash. It is instead passed directly to
`kobo.shortcuts.run`.
The `shlex_quote` usage here actually breaks the code, because it adds
quotes there which are needed only if this command would be serialized
to string and passed to bash. But this never happens. As a result,
the arguments passed to `kobo.shortcuts.run` contain those extra
quotes.
In this commit the shlex_quote is removed completely from this
part of code.
Signed-off-by: Jan Kaluza <jkaluza@redhat.com>
This is similar to image-build in terms of what it does, and somewhat
similar to OSBS phase in how it's implemented.
The phase reads configuration, submits the build via XMLRPC call and
waits for the task to finish. Then it downloads the built image and
includes it in the compose metadata.
JIRA: RHELCMP-315
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
When list is used in gather_lookaside_repos, the Pungi currently
fails with an exception. This is caused by inverted condition
in the code which tries to filter-out the lookaside repos
generated during the Pungin execution pointing to different
compose variants.
Signed-off-by: Jan Kaluza <jkaluza@redhat.com>
Sometimes full clone failed with error fatal: Not a git repository
and we found that .git/refs/ dir is missing after shallow clone failed.
JIRA: RHELCMP-724
Signed-off-by: Haibo Lin <hlin@redhat.com>
