Prior to this change, if a container image used Cachito with OSBS, then
OSBS would store additional "remote-sources" files in the Koji archives
for the build. Pungi cannot parse the metadata for these archive
entries, so it would crash in add_metadata():
File "pungi/phases/osbs.py", line 81, in process
self.worker(compose, variant, config)
File "pungi/phases/osbs.py", line 141, in worker
nvr, archive_ids = add_metadata(variant, task_id, compose, scratch)
File "pungi/phases/osbs.py", line 447, in add_metadata
arch = archive["extra"]["image"]["arch"]
KeyError: 'image'
Tell Koji to only return container image archives, and ignore these
remote-source archives.
Signed-off-by: Ken Dreyer <kdreyer@redhat.com>
Rather than tracking this directly in OSBS phase, move this into Compose
object, which will allow access to this from multiple phases.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Embedding the registry configuration into OSBS config itself is
simple, but makes it impossible to reuse the same configuration for
multiple different composes.
A nice example is a nightly pushing images to a testing registry, and
production compose building the same images but pushing to staging
location. The original design requires duplication of all the
configuration just because registries are different.
With this option, the push information is stored in a separate option as
a mapping from NVR patterns to arbitrary data. The patterns are used to
match finished builds to registry.
The old configuration is marked as deprecated in code and will
eventually be removed. The deprecation handling in config validation
does not allow emitting warnings for nested values.
JIRA: COMPOSE-3394
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
We run a thread for each task, not one per variant. If there are
multiple containers in a single variant, the logs contain confusing
entries about starting the phase multiple times.
2019-02-28 01:58:54 ... [BEGIN] OSBS phase for variant Foo
2019-02-28 01:58:54 ... [BEGIN] OSBS phase for variant Foo
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Translate the using configured patterns, and give OSBS a repo file with
that URL.
JIRA: COMPOSE-3290
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This patch does not do any actual pushing. It will only extract data
about push targets from the main configuration and store it together
with exact Koji NVR in a well-defined location, and also send the data
to message bus for another service to handle.
JIRA: COMPOSE-3228
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Instead of multiple places handling the same thing duplicating the
logic, it's better to do it once upfront. This allows easy caching of
the results.
Additional advantage of this approach is that the config dump will
include resolved URLs. The original reference will still be available in
the copy of the original config.
JIRA: COMPOSE-3065
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
And include variant in repo file name. The whole path is unique already,
but not the filename itself.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The task can take a while to finish, and it's possible for the
authenticated session to expire in the mean time. Watching the task will
work, because that happens by spawning `koji watch-task` as subprocess.
We can work around this by creating a fresh unauthenticated session for
getting the task results.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
All the components are there already separately, but having the full NVR
should simplify searching the metadata with grep.
JIRA: COMPOSE-2519
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
We need to use `repository`, not `os_tree` path. For any non-addon
variant they are the same, but for addons the original path does not
work as it points to the parent really.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
It's possible a variant is excluded via tree_variants option and the
section does not match anything. It can be confusing to users why
nothing is happening. This patch lets Pungi log all unmatched patterns.
Fixes: https://pagure.io/pungi/issue/692
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Config option 'repo' and 'repo_from' are used in several phases, merge
them with one option 'repo'. 'append' in schema is used for appending
the values from deprecated options to 'repo', so it won't break on any
existing config files that have the old options of 'repo_from' and
'source_repo_from' (which is an alias of 'repo_from').
And 'repo' schema is updated to support repo dict as the value or an
item in the values, a repo dict is just a dict contains repo options,
'baseurl' is required in the dict, like:
{"baseurl": "http://example.com/url/to/repo"}
or:
{"baseurl": "Serer"}
currently this is used in ostree phase to support extra repo options
like:
{"baseurl": "Server", "exclude": "systemd-container"}
Signed-off-by: Qixiang Wan <qwan@redhat.com>
If gpgkey option is defined in config, set gpgcheck=1 and set
gpgkey=<value> in variant repo files.
Fixes: #487
Signed-off-by: Qixiang Wan <qwan@redhat.com>
This makes sure the test configurations will be accepted in real usage.
It also enables us to remove some manual error checking that will be
performed by validator.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The same way live_media and image_build accept additional external repos
or variants list, there is now a `repo` and `repo_from` configuration
key to add these.
Fixes: #486
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Phases createiso, liveimages, image_build, ostree_installer and osbs are
done in parallel, logs from these phases are mixed and and it's not
obvious which log message belongs to which phase. This change adds phase
name in log message for these phases.
The new mixin 'PhaseLoggerMixin' is added to extend a Pungi phase with a
logging logger which copy handlers from compose's logger but with
formatter changed.
Fixes: #58
Signed-off-by: Qixiang Wan <qwan@redhat.com>
The schema is written in Python to reduce duplication. When
configuration is loaded, the validation checks if it's correct and fills
in default values.
There is a custom extension to the schema to report deprecated options.
The config dependencies are implemented as a separate pass. While it's
technically possible to express the dependencies in the schema itself,
the error messages are not very helpful and it makes the schema much
harder to read.
Phases no longer define `config_options`. New options should be added to
the schema. Since the default values are populated automatically during
validation, there is no need to duplicate them into the code.
The `pungi-config-validate` script is updated to use the schema and
report errors even for deeply nested fields.
The dependencies are updated: pungi now depends on `python-jsonschema`
(which is already available in Fedora).
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Currently the main log only says the phase started and finished. With
this patch each created image will be mentioned by its name, version,
release and arch.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This is a breaking change as big part of current failable_deliverables
options will be ignored.
There is no change for buildinstall and creatiso phase.
Failability for artifacts in other phases is now configured per
artifact. It already works correctly for ostree and ostree_installer
phases (even per-arch). For OSBS phase there is currently only a binary
switch as it does not handle multiple arches yet. When it gains that
support, the option should contain list of non-blocking architectures.
For live images, live media and image build phases each config block can
configure list of failable arches. If the list is not empty, it can
fail. Once we have a way to fail only some arches, the config will not
need to change.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Atomic Reactor does not honor this option. In the future we might need
to reintroduce this feature, but given that it does not work in the
current form it is better removed.
Fixes: #348
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
It will take RPM repo from a variant in this compose and a Dockerfile
from configured git and use it to build an image.
The build images are uploaded to some a Docker registry by OSBS and are
not directly part of compose (because there is no export function).
There is a new metadata file `osbs.json` that has some information that
can be used to find the image.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Ken Dreyer
Haibo Lin
Jan Kaluza
Lubomír Sedlář
Qixiang Wan
Dennis Gilmore