It may make sense to break a big compose into smaller chunks that can be
done independently. This script allows describing the smaller parts,
runs them with correct dependencies and arranges the result to look like
a single big compose.
All parts use the same koji event, that is either obtained from Koji, or
from command line argument.
JIRA: COMPOSE-2654
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
We already make this possible for the ostree installer, but it was
missing from the traditional one. The default behaviour is to let lorax
decide, but if user knows better, they can overwrite in configuration.
JIRA: COMPOSE-3188
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Add more details to the documentation for the product_id_allow_missing
setting:
- Pungi expects a product cert for each arch in each variant.
- Pungi will exit with an error by default if a variant+arch's cert is
missing.
- Pungi will log a warning if product_id_allow_missing is True.
Merges: https://pagure.io/pungi/pull-request/1102
Signed-off-by: Ken Dreyer <kdreyer@redhat.com>
Document the "productid" files that Pungi creates when the user
configures the "product_id" setting. Describe where to find the
"productid" files, and how they relate to subscription-manager.
Signed-off-by: Ken Dreyer <kdreyer@redhat.com>
If configuration requests a different ref than what treefile has, a
wrong message can be sent.
If the treefile is in JSON, the local copy will be updated in-place and
it works. However with YAML the updated version is still written as JSON
and thus we are still sending the original value.
Fixes: https://pagure.io/pungi/issue/1092
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The script can either take config from an existing compose, or load
files by path. By default it will perform full validation (and add
default values and resolved git references). This can be turned off.
The final JSON is printed to stdout.
JIRA: COMPOSE-3066
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Instead of multiple places handling the same thing duplicating the
logic, it's better to do it once upfront. This allows easy caching of
the results.
Additional advantage of this approach is that the config dump will
include resolved URLs. The original reference will still be available in
the copy of the original config.
JIRA: COMPOSE-3065
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This makes it hard to programatically access the dump.
The timestamp was included originally to make sure that restarting a
compose in debug mode will preserve all configs. However we don't really
support that usecase anyway.
JIRA: COMPOSE-3063
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This should be on top level of the ISO, and list files added
specifically to the ISO. If there's anything inherited from one some
variant, the files will be listed in metadata in the variant directory.
JIRA: COMPOSE-3069
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The files created in runroot task are owned by root by default (because
that's who is running the processes to create them). Making the results
world readable allows the compose to work, but it still can be difficult
to clean up old composes if they contain random files owned by root.
Fixes: https://pagure.io/pungi/issue/1039
JIRA: COMPOSE-2906
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Currently the `copy_all` function resolves all symlinks and crashes on
broken symlinks. Instead it should copy symlinks as symlinks.
Fixes: https://pagure.io/pungi/issue/1084
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
yaml.load is equally powerful as python pickles, and we don't
need that level of power for the ostree yaml files.
Better safe than sorry.
Signed-off-by: Patrick Uiterwijk <patrick@puiterwijk.org>
They are not always wanted, so let's not include them by default.
There's a new option to include the same files that extra files phases
uses, or alternatively they can be configured specifically and put into
the variant subdirectory.
JIRA: COMPOSE-3084
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Up to now it was possible to change the pattern for all images, but
there are use-cases where different variants might want different names.
For example there could be one main variant that should only have
product name in the ISO filename, but addons should still be marked with
variant name.
JIRA: COMPOSE-3041
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The environment in comps for a variant can refer to groups in parent
variant (either for addons, or because of other configuration). We
should not remove the groups in this case.
This requires changes in two places:
* teaching `comps_filter` about groups that should not be removed
* fixing writing comps so that it does not actually change the data as
well
JIRA: COMPOSE-2612
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The initial implementation is very coarse. It enables it for all
variants and all modules. That is not always wanted.
With this patch, the config file has to explicitly list the devel
modules for each variant that should have it. The variant must be
configured also to include the non-devel module (but the module may be
in lookaside so it won't be included).
We now include module metadata in the internal lookaside repo, so that
this whole thing works if one variant is built on top of another.
JIRA: COMPOSE-3034
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Since 1.18 productmd will make the list available for consumers. If
possible, we should use it, and fall back to hardcoded list.
JIRA: COMPOSE-3044
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
When the configuration lists `*` in `additional_packages`, it has a
special meaning. If it's passed to fus directly, it will use it to match
all modules and RPMs that are not masked by a package available in some
default stream. Neither is good. We don't want it to match modules, and
we want even the masked packages.
The fix is to expand the wildcard to a list of NVRs and give that to
fus. It should include the package even if it is masked.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
There is no repoclosure that correctly understands modules. The best
thing we can offer is the errors reported by the depsolver.
JIRA: COMPOSE-2321
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
If a multilib package fails to be added (broken dependencies, or it
doesn't exist at all), we want to track it and eventually stop the
iterations.
Merges: https://pagure.io/pungi/pull-request/1071
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Stream can contain dash sign and when MBS imports such NSVC to Koji, the
dash is replaced with underscore. The current Pungi code does not
respect that and tries to use the stream from Koji directly, which
results in wrong stream being using in some Pungi internal data.
In this PR, the NSVC is taken from module metadata section of CG Koji
build, which contains real stream including the dashes.
Merges: https://pagure.io/pungi/pull-request/1072
Signed-off-by: Jan Kaluza <jkaluza@redhat.com>
Without this we don't have artifacts from all modules when the first
modular variant is solved. That makes some modular packages appear as
bare.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
If there are two variants with different module sets, the missing
modulemd from variant B causeing depsolving in variant A to consider the
packages as non-modular. That is wrong.
Related: https://bugzilla.redhat.com/show_bug.cgi?id=1640125
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Instead of having one giant command line, write the long list into a
file and pass that to the solver.
The items on the input list are sorted for easy processing.
JIRA: COMPOSE-3012
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
We can't drop the whole package set once the first solver iteration
finishes, because it runs for each arch separately and we need the data
for each of them. We can however delete the arch specific portion.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
If the file is generated, Pungi will modify it at the end of
buildinstall phase. We need to point ISO creation to the modified file,
otherwise the checksum in .treeinfo will be incorrect.
It's sufficient to just update the graft point to correct file, copying
is not needed.
JIRA: COMPOSE-2976
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
