Originally, the idea was to remove non-blocking images that failed the
check. They were only removed from the manifest, which creates some
confusion as to what is going on. With this patch, a failed check on
non-blocking deliverable will only print an error message.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
When ISO is marked as failable and check fails, the compose would still
be aborted. This patch fixes that
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This should help with debugging by providing better information on which
Pungi version created the compose. In development, the version will show
output of git describe, in production it asks which version is installed
in site-packages/. The egg-info directory must be installed for this to
work.
It is no longer necessary to synchronize version in `setup.py` with
`pungi/__init__.py`.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Instead of installing pungi itself in the runroot, we can prepare the
commands to be run on compose box, write the shell script into work/
directory, which is mounted in the chroot, and execute that. This way
there is no business logic in runroot (except for finding lorax
templates).
The main advantage of this approach is that we don't need to pull any
extra dependencies into buildroot.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
When package has incompatible arch for a tree, the same error message
could be raised from two different places. This patch adds more
information to the message, so that it is easier to find the actual
problem.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This is a breaking change as big part of current failable_deliverables
options will be ignored.
There is no change for buildinstall and creatiso phase.
Failability for artifacts in other phases is now configured per
artifact. It already works correctly for ostree and ostree_installer
phases (even per-arch). For OSBS phase there is currently only a binary
switch as it does not handle multiple arches yet. When it gains that
support, the option should contain list of non-blocking architectures.
For live images, live media and image build phases each config block can
configure list of failable arches. If the list is not empty, it can
fail. Once we have a way to fail only some arches, the config will not
need to change.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Atomic Reactor does not honor this option. In the future we might need
to reintroduce this feature, but given that it does not work in the
current form it is better removed.
Fixes: #348
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
ISO image without MBR and GPT can still be bootable if it has an El
Torito boot catalog. The test phase must accept such images.
This slightly defeats the point of the check: to verify the ISO is
hybrid. However, based on the metadata we have no way to actually tell
if the image is supposed to be hybrid.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Make all imports either use full package name starting with `pungi` or
use explicitly relative import. This will avoid issues when importing a
module that shadows another module on PYTHONPATH.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This lives now in pungi.util. It was copied there long ago and all the
places that reference it reference it in that location.
I think this code in pungi.phases.pkgset is unused and can be removed.
The other function moved to the common module.
Signed-off-by: Ralph Bean <rbean@redhat.com>
Instead of overwriting the same log file, make sure we keep all the logs
for debuginfo, source and binary packages.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This patch makes it possible to use different style format placeholders.
Instead of the percent encoding it is now possible to use simple curly
braces.
%(foo)s -> {foo}
The old format is still available.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
If the `<groups></groups>` section is not specified in the variants XML
file, all groups will be used in this variant. The section must be
omitted completely, not just empty. This is (and was) correct according
to the DTD, it just lead to crash before.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Even if gather phase is skipped, it will still generate a rpms.json
metadata file. It will have no payload, but the header structure is
there.
Createrepo phase had to be updated to ignore variants that have no RPMs
listed in metadata.
There is one more fix for writing treeinfo files: if repomd.xml files
are not generated, it will no longer crash.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This will avoid confusion when the file can not be found, but previous
export from remote location worked well. In such case the log said:
Exporting from SCM...
Boom, no files found...
This commit changes it into:
Exporting from SCM...
Exporting file from current working dir...
Boom, no files found...
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Instead of running the copy function for all variant.arch pairs
unconditionally, only do it if there is something to do. This makes the
log more understandable.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
It will take RPM repo from a variant in this compose and a Dockerfile
from configured git and use it to build an image.
The build images are uploaded to some a Docker registry by OSBS and are
not directly part of compose (because there is no export function).
There is a new metadata file `osbs.json` that has some information that
can be used to find the image.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This should fix the issue with only printing information about automatic
toggling of `supported` flag to standard output and not to a file.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Instead of iterating over image manifest, loop through all variants and
arches and see if there are any images. This avoids a crash for variants
nested under other variants (layered products, optionals or addons).
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This is for layered products that have a variant mapped
to multiple variants in a base product, for example:
* Foo-Tools (id: FooTools, uid: Foo-Tools, name: Tools)
* Bar-Tools (id: BarTools, uid: Bar-Tools, name: Tools)
Requires productmd >= 1.2.
Signed-off-by: Daniel Mach <dmach@redhat.com>
Add a documented and tested config options for setting ISO parameters
instead of hardcoding magic values.
Fixes: #256
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This patch also fixes a bug where packages in hashed directories would
not be recognized as such and would not be placed after other files.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Some parts can be written in a more straight-forward way. This also
fixes the issue with not raising error on adding to big file.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Instead of putting everything to <variant>/<arch>/iso, move images/,
EFI/ and isolinux/ subdirs to <variant>/<arch>/os. The nicely named ISO
image is still in the original location.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Instead of having a separate config option, just use the koji profile.
According to release notes, this should have already been done.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
On Python 2.6, it requires the format placeholder to have explicit index
of argument, so using % formatting is easier.
There are a couple places where the method is still used because the
same argument is used twice.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This commit also removes the ability to generate timestamp. It must now
always be passed explicitly. The feature was not used anywhere and it
actually did not work.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This tests writing and reading them.
Also, it makes sure the description for layered products is correct:
there was a missing space.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Each variant.arch combination can have multiple ostree repos configured,
so we need to make sure the filesystem paths don't clash.
The paths used now are:
logs/<arch>/<variant>/ostree-<x>/
work/ostree-<x>/config_repo
The x stands for a number identifying the task. It has no relation to
actual contents of the repo.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Make sure the directory exists before calling Koji (because otherwise
the mounting will fail). Update the runroot script to initialize the
repo when there are no files in the target destination.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The performed checks:
* If format is ISO, the file must have correct magic string
* If it's bootable, there must be MBR or GPT
When a check fails on any failable deliverable, it will be logged and
the file removed from metadata (it will still remain on the disk). This
required a change to write the images.json file later (after test
phase).
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The config object from Kobo does not allow keys starting with
underscore, so we prefix it with `private_` instead.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
rhbz#1331317 when we refactored how we make dvds in
df400002d8 we lost the ability to boot
the dvd as a disk image.
Signed-off-by: Dennis Gilmore <dennis@ausil.us>
There is a lot of mock objects needed: we bypass calls to Koji, use a
mock FileCache that does not need valid RPMs on disk and avoid any
multithreading.
The test data in tests/fixtures/tagged-rpms.json comes from Koji. It is
filtered down to only a few packages to make it manageable.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This patch also fixes the bug where using a preconfigured Koji event
would not actually work and instead the latest event would be used.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The live_images, live_media and image_build phases have same options
that need to be specified on each image. This leads to a lot of
duplication in the config file. This patch adds global settings and
phase-level settings that allow to significantly reduce duplication.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
It should have raised NotImplementedError, but we better remove it
altogher since we are missing export_dir anyway.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This is a sure way to have it removed, without having to duplicate the
logic in all places where it is used.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The logic for expanding the list of patterns into a list of actual RPM
paths was duplicated for both exporting a directory and file.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Instead of spawning `cp x/* y` there is now Python code to the same
thing. This should help with debugging if something fails as the
traceback will be more informative (rather than saying a command
failed). As another benefit the tests get much simpler.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The pungi.global.log should show subvariant for each failed deliverable
(if available). When the compose finishes, there is a new log file in
logs/global/deliverables.json containing details about all deliverables
as triples of (variant, arch, subvariant).
* `required` lists all deliverables that can not fail
* `attempted` lists all failable deliverables that were started
* `failed` is a subset of `attempted` and only contains deliverables
that failed
If the compose fails, the lists may be incomplete.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
We can't assume the templates will just be available. This patch adds a
configuration option to point to the git repo with them. It will be
cloned at compose box and relative paths to templates will be made
absolute respective to this clone.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
and pass absolute path to the config into runroot. This could avoid the
problem of not being able to clone the repo in runroot.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
When multiple threads call `get_profile_module` at the same time, some
of them may get an exception from koji. This should prevent the problem.
Fixes: #253
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
A couple arguments passed from phase to worker threads were not
duplicated. Only one copy is passed now.
A test case was added both for the phase itself and for worker thread as
well.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Instead of running a long command line in the runroot (or locally), move
all that work into a separate script that will be installed. This means
chroot will need to install pungi.
Everything should work as it did before. The only exception to this is
that there is logic to find lorax templates instead of harcoding the
location. This is done using a separate script.
Related: #230Fixes: #231
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Instead of looking for the DTD at module load time do it only when
required. Use a logger (if supplied) to print the warning.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
If umask is set to something too high (>0022), a warning will be
printed. It does not abort the compose though.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This causes a race condition: umask is process-wide setting, so any file
created by another thread while the umask is set to 0 will have wrong
permissions. This also removes the possible problem of not resetting the
umask if exception is raised.
Fixes: #239
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
There already were config options tree_arches and tree_variants, but the
filtering was done at the compose level and there was not interaction
between the two options. This led to problems when a variant would have
all its arches filtered out.
This patch moves the filtering to the variant loader. It adds better
logging, so whenever a variant is filtered (for any reason), it will be
explicitly stated in the logs.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This uses a new common function that will ensure consistent logging
without duplicating the functionality all over the place.
A couple tests are updated to verify that correct data is logged.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
When the koji tasks fails but produces some output (e.g. .discinfo),
copying the artifacts would crash the compose. That should not happen if
the variant/arch is marked as failable.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This phase runs lorax with extra templates in Koji runroot task, links
the boot.iso to proper location in compose directory and adds the
installer iso to image manifest. This phase runs concurrently with live
media etc.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This phase runs the script to make ostree repository in koji runroot
task. It runs right after regular yum repos are created.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This is a wrapper over ostree and rpm-ostree. It is intended to be run
in either Koji or Mock chroot.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Move getting of the precomputed value to a single place in Compose
class. The value now has format `date[.type_suffix].respin`.
Resolves: rhbz#1319924
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Print the subvariant together with variant UID and arches. This should
make the global log easier to understand.
The output of koji command should now be split into multiple files in
logs/{arch}/livemedia-{variant}-{subvariant}.{arch}.log instead of
having them all in one file.
The tests were updated to use more sensible value for the subvariant
field.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This should generate the same volume id in buildinstall and createiso
phases, with isolinux.cfg being consistent as well.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Dennis added a 'subvariant' property to the Docker image config,
but we weren't using it, we were just hard-coding the variant
as the subvariant...and doing it wrong, as well, using the
variant object rather than its uid property.
This fixes both problems: we'll now use the explicitly set
image config 'subvariant' property if there is one, otherwise
we use the variant.uid as the subvariant.
Note this is a high priority fix, as it broke F24 compose today.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This adds the new 'subvariant' property to all images produced by Pungi.
For most image types this is the same as the variant, for now. For
live_images and livemedia_phase, the image config may specify
'subvariant' and the value will be used if present, otherwise the
variant name will be used.
We also now synthesize the Koji image 'name' for live and appliance
images if the image config doesn't specify it, and use a name that
complies better with the naming policy for ARM disk images (partially
resolving https://pagure.io/pungi-fedora/issue/7 ).
This is completely untested as yet, just bashing stuff out on a Sunday,
will work more on it tomorrow.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Check once before iterating through the variants. This greatly
simplifies the tests as each function now has one less code path.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
When creating the comps repo, use a separate log file for each variant
instead of overwriting the same global file again and again.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The configuration can specify a list of variants for which the original
comps file will be copied without any modification.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
It is used only in createiso and productimg phases.
For productimg, it needs to be present only when the compose is bootable
and productimg phase is explicitly enabled.
For createiso, it is only needed if runroot is not enabled.
Additionally, if we detect pungi running on arch for which syslinux is
not available, a warning is printed, but the compose is allowed to
continue (and possibly crash later).
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
If the configuration specifically requests no jigdos, there is no point
in checking for the binary existence.
This is not 100% reliable. The jigdo option defaults to True, so if the
option is not specified the binary is required even if there are no
images configured.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This patch adds configuration option to change disc type used in file
name. So far this can only be changed for link to images/boot.iso.
Resolves: #109
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This was already implemented as part of pkgset phase. It is now moved to
the util module and covered with tests.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
'tree_variants' in configuration should be able to limit the tree
variants, just like the config option 'tree_arches' which is used to
limited the arches.
For example, if there is configuration (refer to doc/configuration.rst)
go with:
tree_variants = ["Server"]
then only "Server" variants will be composed, and any other variants in
variants.xml will be ignored.
Signed-off-by: Qixiang Wan <qwan@redhat.com>
Rebased on master
Signed-off-by: Dennis Gilmore <dennis@ausil.us>
This patch tries to simplify the code by:
* breaking up too long lines
* simplifying the loop to start createrepo jobs
* removing duplication
* general clean up
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Simplify the code a bit by removing conditions that don't help in any
way: executing a loop zero times is the same as not executing it at all.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
With this patch Pungi should be more tolerant of network failures when
running a blocking command (creating live media or live images).
If the connection drops and the output indicates network problems, Pungi
will try to watch the task with `koji watch-task`. This will be retried
until it finishes (successfully or with some other failure). There is an
increasing timeout after each retry. Currently the maximum number of
retries is not limited.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
As a side effect, the non-existing repositories are no longer passed to
global repoclosure.
Fixes: #196
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
After config was modified to work with sections, the resolving broke.
This patch fixes it and adds a test to catch this problem in the future.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The log file started with createiso-, which is utterly confusing. With
this patch, the logs are named with liveimage- prefix.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Extracting extensions from the file name is not reliable as there is no
way to determine where extensions start. There can very well be a
version.release separated by dot. To bypass this, just use hardcoded
list of possible formats.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
* Add option to keep filenames generated by Koji.
* Put results of spin-appliance into image dir
* On failure images are no longer deleted.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
With this patch, you can specify a command for
signing of koji builds. For example:
signing_key_password_file = '~/file_with_password_for_key_fedora-24'
signing_key_id = '81b46521'
signing_command = '~/git/releng/scripts/sigulsign_unsigned.py -vv --password=%(signing_key_password)s fedora-24'
'signing_key_password_file' is a path to a file which contains
a password that will be formatted into 'signing_command' string
via '%(signing_key_password)s' string format syntax (if used).
Because pungi config is usualy stored in git and part of compose
logs we don't want password to be included directly in the config.
Note: If '-' is used instead of a filename, then you will be asked
for the password interactivelly right after pungi starts.
'signing_key_id' is ID of the key that will be used for the signing.
This ID will be used when crafting koji paths to signed files
(kojipkgs.fedoraproject.org/packages/NAME/VER/REL/data/signed/KEYID/..).
'signing_command' a command that will be run with a build as a single
argument. This command mustn't require any user interaction.
If you need to pass a password for a signing key to the command,
do this via command line option of the command with use of string
formatting syntax '%(signing_key_password)s' (see details
about 'signing_key_password_file').
Signed-off-by: Tomáš Mlčoch <tmlcoch@redhat.com>
koji for livemedia acts different to image builds and does
not translate $arch to x86_64, i386, etc so we need to just pass
in $basearch so that yum/dnf will translate it for us
Signed-off-by: Dennis Gilmore <dennis@ausil.us>
The variants.xml file can list a variant with is_empty="true" and no
groups. If such variant is found, not package gathering will be run for
it, and no repos will be created.
This only makes sense for a variant that will have some other
deliverables like live media or images.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Since multiple images are created in a single Koji task, the path to log
file contains a list of arches. These used to be separated with comma.
For consistency with live-media they are now separated by dashes.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
KojiWrapper returns the task id as an integer already (if at all). There
is no need to parse it again.
Pagure: #148
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This patch updates tests so that they pass, and fixes a couple places in
image build that did not work correctly with the nested configuration.
The documentation is reformatted so that it horizontal scrolling is less
likely.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
If Koji fails runroot task for some reason, the output will most likely
not have the required format and will crash Pungi.
Pagure: #140
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This patch fixes how logs are stored if lorax is used as buildinstall
method. The logs for each variant are in a separate file now. If failure
is allowed, the global log will now show why it failed.
A couple tests are added as well.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This phase builds live media in Koji using the Live Media Creator. It
runs in parallel with current live images, create ISO and image build
phases.
The documentation is updated to explain how to configure this.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This patch adds support for live media creator in Koji. The intended
workflow is to create a command , run it and finally collect built
artifacts.
get_live_media_cmd()
run_blocking_cmd()
get_image_paths()
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The methods mentioning image build are generic and can work for other
task types.
get_image_build_paths -> get_image_paths
run_create_image_cmd -> run_blocking_cmd
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
When the release is explicitly set to None, generate a value from date
and respin. The documentation is updated to explain how it works.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
There is now a single option `multilib`, that maps variants and arches
to multilib methods. This replaces old `multilib_methods` option.
Multilib arches are implicitly deduced instead of using the
`multilib_arches` option.
The test compose is updated to only enable multilib on Server and its
addons.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This patch removes some duplicated variables that get passed on to the
build thread. It also moves creation of the command for generating image
manifest closer to where it is used. Finally it adds tests for the
thread.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This patch adds option for adding repositories from other variants to
the koji task for building images.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
When pungi crashes, the logs will often contain useless description of
a variant. With this patch, the traceback will have details on the
variant.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
When compose is finished successfully, and there are some failed
deliverables, modify the final status to FINISHED_INCOMPLETE and log
what failed for which variants/arches.
This means the failures are logged twice, first time immediately after
it failed, second time in the summary at the end.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Fedora variants needs both general fedora-release and
fedora-release-$variant packages installed. This patch disables the code
that would throw fedora-release away (assuming correct config is set).
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The configuration can now specify image-build as a deliverable that can
fail but not abort the whole compose.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
* Move getting arches to separate method.
* Modify git url only if there is going to be a build. This is not very
likely to happen, but could save a bit of time if it really does
happen.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The config can now additionally specify other variants whose repos will
be passed on to koji. The previous way of specifying extra repos is
still available, as is the automatic adding of repo for current variant.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Given a list of arches, koji can build multiple images in one go
(automatically starting children tasks for each one).
This causes a bunch of changes:
* The configuration no longer allows changing config based on
architecture, only variants are allowed. It is however possible to
filter which arches are used for the building in the variant.
* The configuration files for koji image-build are stored in
work/image-build/$variant (not split based on arch).
This patch also changes the option name that is passed to koji
image-build: the repos should be specified under key `repo` (without the
trailing slash).
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The code modifies the config in place, so it only works in the first
iteration. The fix is to create a copy which can be safely modified and
next iteration will still see the original data.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The images listed in the file are obtained from .treeinfo files created
during buildinstall phase. However, the files are not stored directly in
buildinstall dir `work/$arch/buildinstall/` but in variant subdirectory
`work/$arch/buildinstall/$variant`.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
First, this fixes the crash when volume id requires variant uid, but it
is not specified. This happened in buildinstall phase.
When lorax is used, it is run once for each variant, so we can actually
specify the variant and get the correct variant.
When using buildinstall, no volume id will be generated and pungi will
possibly crash later on.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
There is a new configuration option that allows listing what can fail
without aborting the whole compose. So far, only buildinstall, createiso
and liveimages phases react to this option.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The computation of image name has been moved to a separate function.
This allowed simplification in how work dir for isos is computed, but
the result is not changed.
The live image phase has some special casing for names of RPM wrapped
ISOs. This is moved to the actual phase. Since this is (and has been)
undocumented, there should not be many users of this special case.
The documentation is updated to describe how image names and volume ids
are determined and how the process can be customized.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
When the image build configuration specifies kickstart URL as a HEAD of
a git repo, pungi now figures out what the actual hash of that commit is
and uses that hash instead. This might make logs clearer and should
prevent potential problems if someone pushes to that repo during
composing.
Documentation is updated to mention this.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The config file can now specify options for lorax per variant and arch.
This is needed for Fedora to set x86_64 images as bootable on mac.
The old config option `buildinstall_upgrade_image` was deprecated, as
the same can be specified via new `lorax_options`.
Documentation and tests are updated.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Lorax fails when run on an existing non-empty directory. This patch runs
it in separate subdirectiories base on variant. Running with
buildinstall should not be changed at all.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The buildinstall phase now starts lorax for each variant separately.
Running with buildinstall should not be affected in any way.
Only variants of type=variant are considered. The side-effect of this is
that if an architecture is only used by variants of other types, lorax
will not be called at all.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The lorax wrapper class now understands the --installpkgs argument and
can use it to pass multiple package names to the command.
There is a simple test to make sure the commands includes all specified
options. A bug is fixed where the bug URL would not be correctly
included.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This patch updates the variants DTD and parsing to allow specifying
multiple build install packages for each variant.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This patch modifies how checksums are stored - it uses BSD-style
checksums.
The filename with the checksum can now be customized depending on actual
compose run and metadata. This required adding another option to the
checksumming phase. Documentation is updated and includes example for
creating names used in Fedora.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
On case-insensitive filesystems it is not such a good idea to have
directories that only differ in case. Packages should be always split
into lowercased directories.
The test data is modified to include some packages starting with
uppercase letters. The example in code can be verified by running
`nosetests --with-doctest`.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
getting the commands together to run the iso creation process was
incorrectly moved when jigdo creation was made optional, patch fixes
https://pagure.io/pungi/issue/77
Signed-off-by: Dennis Gilmore <dennis@ausil.us>
a workaround has been put in place on os's that need it. dnf errors
when a package is listed that is not available. breaking rawhide
composes.
Signed-off-by: Dennis Gilmore <dennis@ausil.us>
The messaging is not really part of compose settings. It is an
infrastructure part. As such, it should really be set up as part of
pungi invocation, not compose configuration.
The documentation is updated to reflect this. Some updates to the
documentation are done as well: listing messages about ISOs and minor
formatting updates.
The test_compose.sh script can now accept additional command line
options and pass them on to pungi-koji to simplify testing.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Instead of hardcoding /usr/bin/python in shebangs, use /usr/bin/env.
This allows Pungi to work with dependencies installed in virtualenv.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
When phase starts, a message is sent with list of images that are going
to be built. As each images is finished (or fails), another message
announces that status.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
With this patch, Pungi can invoke an arbitrary command on various
moments of the compose process. The invoked command can the decide on
what message to send (and using what messaging system).
The actual command is specified in the config file.
There is a script provided that sends the messages via fedmsg.
The documentation is updated to have details about the new config option
as well as the interface for the messaging script.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The phase goes through all images declared in image manifest, computes
their checksums, stores them in appropriate files and updates the
manifest so that it includes the actual checksums.
The documentation contains details about new configuration options.
The test suite now needs Python's mock package.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
These phases were computing checksums for images:
* buildinstall
* createiso
* image_build
* live_images
* product_img
In each phase the checksummed thing would ultimately end-up in image
manifest.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The checksums are still generated in the ImageBuild and CreatISO phases,
but collecting of them into single file is moved from pungi-koji script
into a separate phase.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Add add_template, add_template_var, add_arch_template, and
add_arch_template_var to the call for lorax.get_lorax_cmd for the Atomic
ISO composes.
Remove duplicate if statement for add_template_var in lorax wrapper
CHANGE: Rename product_* config options to release_* for consistency with productmd.
ACTION: Rename product_name, product_short, product_version, product_is_layered to release_* in config files.
Rename //variant/product to //variant/release in variants XML.
CHANGE: pkgset_koji_url and pkgset_koji_path_prefix config options replaced with koji_profile.
ACTION: Add 'koji_profile = "<profile_name>"' (use "koji" for Fedora) to config files.
You can safely remove and pkgset_koji_url and pkgset_koji_path_prefix from config files.
These tests frequently report false-positives,
because package set may contain broken dependencies,
while compose doesn't.
Removing the tests will also reduce compose time a bit.
CHANGE: createrepo_c is config option now defaults to True.
ACTION: You can safely remove 'createrepo_c = True' from config files.
Set 'createrepo_c = False' if you need legacy createrepo.
CHANGE: createrepo_checksum config option is now mandatory.
ACTION: Add 'createrepo_checksum = "sha256"' (or "sha") to config files.
rename the pungi binary to pungi-koji since it does is tasks in koji
rename pungi-gather to pungi as it is the standalone old pungi binary
there is scripts that expect pungi to be the old pungi, the new binary
is not yet in use, pungi-koji semes to make sense, open to better ideas
The default is /usr/share/pungi/multilib/, pass --multilibconf to
override this.
This also adds multilib.init() so that an import of multilib doesn't
immediately setup the classes.
(cherry picked from commit 234524296fd53871aed64690cf6a7d5849ca154a)
for https://fedorahosted.org/rel-eng/ticket/6008 refacter how we deal
with the data that feeds into .treeinfo
Deprecate --name for --family
Deprecate --flavor for --variant
rather than using --name as the iso base name use the value of
family if there is a variant add it with a - as the seperator
- Add command line option to disable creation of split media
- Remove -S -P options, as splittree and packageorder are now
called from createIsos, if needed.
of the comps. Filter it and make use of it when creating repos.
- Move _doRunCommand into pypungi/__init__.py so that it can be
easily used by all modules. Also pass in a logger for correct
logging
- Quiet down creatrepo calls
Make Gather and Pungi subclasses of this base class
Adjust logging to use the facility in PungiBase
Adjust logging levels to be appropriate
Drop a note when the compose is finished.
- Add a minimal-manifest for test composes
- Add current F7 comps file for test composes
- Use some anaconda code to depsolve, gets better (and more common) results
