Move repoclosure out from test phase into its own phase and
run parallel with image building phases(osbs, imagebuild, ...)
to speed things up.
JIRA: RHELCMP-8
Signed-off-by: Haibo Lin <hlin@redhat.com>
I've analysed multiple nigthly composes and often the only difference
in the configuration between two nightly composes is different
`product_id` commit hash.
The `product_id` is used in later `createrepo` phase and does not
influence the gather phase at all. I therefore think it can be
whitelisted in gather phase reuse code.
Signed-off-by: Jan Kaluza <jkaluza@redhat.com>
When modules are used, there are lot of small package sets. These
package sets have usually less than 500 packages. The createrepo
part of `MaterializedPackageSet.create` executed for such small
set of packages takes around 1 second. Most of this time
the createrepo_c runs in single thread. It does the initialization,
it writes the XML files, ...
The parts of createrepo which can be run in parallel and therefore
would use all the CPUs are quite small for very small package sets.
This commit therefore executes multiple threads with
`MaterializedPackageSet.create` for these very small package sets.
This saves around 40 seconds from pkgset phase for RHEL compose.
Signed-off-by: Jan Kaluza <jkaluza@redhat.com>
- Get also requires/provides of RPMs in package set.
- Store the results of gather phase as pickle file.
- Reuse old gather phase results in case Pungi configuration
did not change, the "names" of RPMs in global package set
did not change and their requires/provides did not change.
- Add `gather_allow_reuse` option to enable this feature.
Signed-off-by: Jan Kaluza <jkaluza@redhat.com>
Add gather_allow_reuse, add more tests and better handling of gather_lookaside_repos.
The current code calls `find_old_compose` followed by multiple `os.path.*`
calls to find out if particular file exists in the old compose. This
duplicates code a lot and makes it harder to read.
In this commit, new `Compose.old_compose_path` is introduced and
used instead of direct calls of `find_old_compose`.
Signed-off-by: Jan Kaluza <jkaluza@redhat.com>
If Koji pungi-buildinstall is used, then the buildinstall results are
stored in the `output_dir` dir, but in "results" and "logs" subdirectories.
We need to move them to final_output_dir.
Signed-off-by: Jan Kaluza <jkaluza@redhat.com>
We would like to start generating the buildinstall phase using the safer
Koji Pungi Buildinstall plugin and stop the direct use of Runroot plugin.
The plugin so far exists only as PR for Koji:
https://pagure.io/koji/pull-request/1939
This commit adds support for this plugin when `lorax_use_koji_plugin`
is set to `True`.
Signed-off-by: Jan Kaluza <jkaluza@redhat.com>
There was an attempt to achieve this by customizing --version and
--release arguments for Lorax, but Pungi does not take the [general] and
[release] sections from its .treeinfo. Instead it was always using
release version.
The value from this new option will be put into .treeinfo and used for
--version and --release arguments in Lorax (unless explicitly defined in
lorax_options to another value).
JIRA: COMPOSE-4029
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
When `link_type = "symlink"` is used, the packages are in fact symlinks
to /mnt/koji. When graft points file is generated, the paths in this graft
points file point to symlinks and therefore symlinks are copied into the
generated ISO file instead of real files.
In this commit, the code to generate the graft points file is changed
so it resolves the symlink to real file stored on /mnt/koji. To make
this code safer, it does such resolving only in case the symlink points
outside of `compose.paths.compose.topdir()`. Therefore you can still
generate ISO file with symlink pointing to file stored within the ISO
file itself, although this is not done currently afaik.
The main reason for this is to be able to generate ISO files even
without hardlinks (which would need read-write access on /mnt/koji)
and without copying all the packages from /mnt/koji to local storage.
Signed-off-by: Jan Kaluza <jkaluza@redhat.com>
When pungi-gather (or old pungi) download the packages from repos into
work/$arch/, they are linked to work/global/. This was using link_type
configuration option.
However if that is set to symlink, we get a relative symlink in
work/global/ which is later copied under the compose/ directory. Since
it's a relative symlink, it gets broken by this.
The fix is to hardlink the downloaded packages instead in the first
step. Since both the source and destination are in work/ directory, we
know it's the same volume and hardlinks should work. There is a fallback
to copy just to be sure, but it shouldn't ever be used.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The `runroot_method` now accepts `dict` value with phase name as a key
and runroot method as a value. For backward compatibility, the `str`
value is still supported.
The new `global_runroot_method` option has been added which defines
the runroot method in case it is not set in `dict` in the `runroot_method`.
This commit allows running `createiso` phase locally while keeping the other
phases in Koji.
Signed-off-by: Jan Kaluza <jkaluza@redhat.com>
Theoretically it is possible, and this is the bare minimum of changes
needed to survive such situation. There may be other pitfalls.
Fixes: https://pagure.io/pungi/issue/1309
JIRA: COMPOSE-4016
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Originally the list of solvables for fus was growing with each iteration
and nothing was ever removed. That later changed so that fus iterations
are only done on newly added stuff. It's great for performance, but
means that the last log is not a superset of all others.
To get all dependency problems we need to look into all log files, not
just the last one.
JIRA: COMPOSE-3964
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
When there is an exception in gathering (such as after seeing unsigned
packages in deps method), the exception was lost and the compose
continued to run until it tried to access the result and crashed on
KeyError.
Relates: https://pagure.io/releng/failed-composes/issue/587
JIRA: COMPOSE-3986
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
When running repoclosure as root user, it will use other dir instead of
the one returned by getCacheDir().
For yum, with --tempcache option could let the cache dir returned by
getCacheDir() always be used.
For dnf, there's no such an option and we have to handle it specially.
JIRA: COMPOSE-3922
Signed-off-by: Haibo Lin <hlin@redhat.com>
When probing lookasides for platform definition, we need to make sure it
works for repos specified as HTTP urls. Createrepo doesn't seem to
automatically download the repodata, so we have to help it.
JIRA: COMPOSE-3958
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Each depsolved tree will be using its own cache for fus. This should
still allow for faster loading of metadata after first iteration, but
should prevent errors from using cached files meant for another variant
or architecture. The cache is deleted after the last iteration.
JIRA: COMPOSE-3959
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
All places in the code assume the option to not be required except for
this one line.
An obsolete comment is removed as well.
Relates: https://pagure.io/releng/failed-composes/issue/477
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This is basically collecting all individual extra_files.json and putting
their content into a single location in
compose/metadata/extra_files.json. The file format is part of productmd
1.23.
JIRA: COMPOSE-3831
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Instead of just checking that the repo directory exists, make sure the
repodata subdirectory is in there. If it's missing, then createrepo_c
has nothing to use anyway, and it may help avoid issues.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
A lorax template used for the ostree-installer might need an additional
package dependency (e.g., flatpak to embed a flatpak repository) - add
a config key 'extra_runroot_pkgs' to the ostree installer configuration
to allow supplementing the set of packages installed into the runroot.
Signed-off-by: Owen W. Taylor <otaylor@fishsoup.net>
This should make it possible to only import the library only when it's
really needed.
DNF does not work with libmodulemd v2. If we import libmodulemd2 and
then dnf, the program will just hang forever. We only need DNF in
pungi-gather, where libmodulemd is not needed, and also where we do need
libmodulemd, we don't have DNF.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Add a configuration option to enable skipping some modules found in the
configured tag.
Fixes: https://pagure.io/pungi/issue/1260
JIRA: COMPOSE-3794
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This patch adds a new config option. This is expected to be a name of
subdirectory in the repo with module defaults. If supplied, overrides
from that location are loaded every time defaults are loaded.
This raises the minimal required version of libmodulemd to 2.8.0
JIRA: COMPOSE-3828
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Koji started to create relative symlinks to images created in various
tasks. We need to check for that and potentially link the actual file.
JIRA: COMPOSE-3822
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Finding variants with particular architecture is not simple. Swapping
the two loops makes it faster, and additionally it fixes to correctly
work with sources.
JIRA: COMPOSE-3787
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This is needed when a compose does not include any modules itself, but
is using a lookaside with modules.
JIRA: COMPOSE-3720
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This is not called anywhere anymore. Instead of merging these package
sets, they exist as separate entities.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This was a workaround to make some packages from the global repo
invisible for depsolving. This is now handled by packages being in
different repos. We can select which repos are enabled at which point.
This achieves the same result, but much faster.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The repo was used to speed up creating lookaside repo from a variant.
This uses a similar approach as createrepo phase: selecting the last
available package set and using that data.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Simply use all existing package set repos as input for the runroot
task. The command line gets a bit long, but the actual behaviour should
remain the same.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
There is no longer a single repo with all packages. This means that the
metadata has to be loaded from another location.
When taking packages from Koji, we can assume that the non-modular
package tag will be processed last. The repo for this tag will be used.
This has better chance of being useful than using a random module.
For repo sources, there is only one package set anyway, so this change
makes no difference.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The cache is now always saved when the repo is created on disk. The
loading procedure in Koji source is updated to look for cache for
correct tag.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The pickled pkgset was only ever used for debug mode. We don't use that
anymore. Let's stop writing files that are not used anywhere.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
With this patch, there should be a separate package set for each tag
that is consumed.
Generally each module will create a separate package set, with the
exception of -devel modules that will be in the same set as their
non-devel version.
Variants no longer need to keep their own package set objects. Instead
they now include a set of package set names that should be used for the
variant. This can replace the whitelist mechanism of deps gather method.
JIRA: COMPOSE-3620
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Once a package set repo is written to disk, let's use this object that
connects the repository path with the mapping of packages.
This change also makes it explicit where the dependency on package set
repos are. In the original codebase, any part of code could generate a
path to the repo, even if that repo has not yet been written.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This name will serve as an identifier for the group of packages.
For Koji package sets, it should the name of the tag from which the
packages come. For package sets based on repos a dummy constant name is
used.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This opens up a path to having multiple package sets in the compose. The
pkgset phase now creates a list of them (although at this time there is
always a single item in that list).
Any consumer of the package sets objects is updated to handle a list.
Generally this means an extra loop.
JIRA: COMPOSE-3620
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
For 'yum' backend, only cache dirs following repoclosure-$COMPOSE_ID-$variant.$arch
name convention are created, e.g. repoclosure-DP-1.0-20190822.t.0-Bar-Tools.x86_64
But for 'dnf' backend, the dir name looks like
repoclosure-$COMPOSE_ID-$variant.$arch-$suffix and there are other files
created, e.g.
repoclosure-DP-1.0-20190822.t.0-Bar-Tools.x86_64-df9fe164317e314e
repoclosure-DP-1.0-20190822.t.0-Bar-Tools.x86_64-filenames.solvx
repoclosure-DP-1.0-20190822.t.0-Bar-Tools.x86_64.solv
JIRA: COMPOSE-2565
Signed-off-by: Haibo Lin <hlin@redhat.com>
If --lookaside option passed to repoclosure command, extra cache dir
will be created and it should be deleted too.
JIRA: COMPOSE-2565
Signed-off-by: Haibo Lin <hlin@redhat.com>
Both pkgset sources use the same logic to create per-arch repos. There
is no reason to have that code in both places.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The data parsed from variants.xml uses a different format that what we
added in `_add_module_to_variant`. This leads to crashes later.
JIRA: COMPOSE-3746
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This was already discouraged to not be used, and is a bad idea in
current setup anyway. Removing this can simplify the code.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Instead of testing its return value. Future version of libmodulemd will
raise an exception instead of returning empty data.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
When libmodulemd is available, but the compose contains no modules, we
don't want to add the modular metadata anywhere. This patch actually
avoids a crash as `ModuleIndex.dump_to_string()` will return `None` if
there is no data.
JIRA: COMPOSE-3662
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Sometimes it's practical not just warn when ISO is larger than expected,
but to also abort the compose.
JIRA: COMPOSE-3658
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
We can avoid parsing source modulemd information since we can get the
same information from the Koji build info.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Historically each variant had a list of modules. This is no longer
needed and can be dropped. We can also stop logging the modulemd since
we know it was retrieved from Koji and not modified locally.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
On Python 3 it is not possible to sort str and None or RpmWrapper.
First convert everything to strings and then sort it. The sorting is
really to simplify diffing the files, so exact order does not have to be
preserved.
Fixes: https://pagure.io/pungi/issue/1227
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This also cleans up the runroot method detection code to not rely on the
now removed option.
JIRA: COMPOSE-2634
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
If the package set repo contains any modular package, the module
metadata is added there as well.
This is needed to accomodate change in DNF that refuses to work with
repo with modular packages if the metadata is not there. This DNF change
can cause issues in buildinstall phase.
Related: https://bugzilla.redhat.com/show_bug.cgi?id=1623128
The hybrid solver is modified to not create a separate repo with the
module metadata anymore, since it will be available in the repo with
packages. This also allows us to drop code to look into lookaside repos.
We still need to iterate over local modules in order to find out what
platform should be used.
JIRA: COMPOSE-3621
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This patch reuses the existing createrepo_num_threads options to limit
maximum number of parallel createrepo processes.
Fixes: https://pagure.io/pungi/issue/955
JIRA: COMPOSE-2575
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Higher protocols should be more efficient in terms of performance and
storage size. Since we don't really care about interoperability with
different python version, we can safely go to the highest version.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Since there can be multiple tags, the check must be done once for all of
them at the same time. Otherwise any module found only in some and not
all tags would raise this error.
The code builds a set of all existing patterns and then removes items
from it. If there is something left once all tags are processed, it
means such patterns were not matched by anything.
JIRA: COMPOSE-3609
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
If the package set is loaded from a pickle, it will not contain this
key, and thus it can not be again written down into a new pickle. While
this is not a common use case, it's still better not to crash in that
case.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
We need to update the source modulemd to match what we want. For most
modules the name will be correct already, but in case of devel modules
the original name will still be present there.
Fixes: COMPOSE-3596
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This is fairly similar to a package only being built for particular
arches.
Fixes: https://pagure.io/pungi/issue/1198
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
It's created in runroot, the owner and permissions should be updated so
that anyone can read it and user running compose can delete the files.
JIRA: COMPOSE-3545
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
When using lorax, this directory will contain subdirectories for
individual variants. Those are created in runroot and their ownership
and permissions are fixed there. However the top level dir was only
created and not updated.
JIRA: COMPOSE-3545
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This reverts commit ac15f21135.
It is still needed if nodeps gather method is used. It simply returns
all packages listed in all modules.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1708661
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Instead of validating both variants exist, let's just check the
existence of only the variant that is being used as a lookaside.
If the configuration says Foo depends on Bar, the error is reported only
if Foo exists but Bar does not. Any other situation is silently ignored.
JIRA: COMPOSE-3393
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Instead of running the copy from the main script explicitly, make it
part of the thread.
This should make things very slightly faster, and the code is much
simpler.
Fixes: https://pagure.io/pungi/issue/959
JIRA: COMPOSE-2604
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This should be mostly IO intensive operation, so running multiple
commands at the same time should save us a tiny bit of time.
Fixes: https://pagure.io/pungi/issue/981
JIRA: COMPOSE-2646
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The prefix checking only works if there are no streams that would share
prefixes. Let's instead check the value as a whole. There is extra
complexity from the fact that version and context may not be specified.
The stream as specified in input is processed to replace dashes (`-`)
with underscores (`_`) to match how the builds are imported into Koji.
JIRA: COMPOSE-3547
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
For modular tags we only include packages that are included in the
module. Originally the filter was taking package names from
rpms.artifacts section of MMD.
This however does not work correctly, as there can easily be module
which lists foo.src but does not want to include foo.x86_64 or other
arches.
This patch fixes this particular problem by included arch in the set of
packages to be kept.
JIRA: COMPOSE-3543
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The scheme for generating versions has changed multiple times. MBS is
careful to only modify them so that they always compare correctly. This
only works though if the versions are treated as numbers.
This should be safe in that non-numbers should never be encountered as
module version. Libmodulemd internally stores the version as int (or
some version of int).
JIRA: COMPOSE-3540
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Hardlink command can be installed in /usr/sbin, where it is not visible
to non-priviledged users. They can still run it, but don't have it in
their PATH.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Even if we want to break hardlinks from Koji volume, there may be files
that can be hardlinked and save some space on the media.
JIRA: COMPOSE-3482
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Embedding the registry configuration into OSBS config itself is
simple, but makes it impossible to reuse the same configuration for
multiple different composes.
A nice example is a nightly pushing images to a testing registry, and
production compose building the same images but pushing to staging
location. The original design requires duplication of all the
configuration just because registries are different.
With this option, the push information is stored in a separate option as
a mapping from NVR patterns to arbitrary data. The patterns are used to
match finished builds to registry.
The old configuration is marked as deprecated in code and will
eventually be removed. The deprecation handling in config validation
does not allow emitting warnings for nested values.
JIRA: COMPOSE-3394
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
A module build can create packages that are tagged in the content tag,
but should not be included in the module. Originally Pungi didn't know
what exactly the module contains and so it needed to apply filters to
exclude stuff that was definitely out.
With getting the final MMD from Koji, we can actually make this a bit
more strict by only keeping packages that we know we need.
When processing each content tag, we can put into package set only
packages that are included in some module using that tag. This should
work with -devel modules as well. Both the regular and -devel modules
will contribute to the set and thus all packages will go to the package
set.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This source does not really return anything useful. It was necessary to
process the source modulemd to fill in list of RPMs. Since we now get
the final files from Koji, this is not needed anymore and the source can
be dropped.
This change requires a lot of tweaks for test.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The file we get from Koji has all important bits already filled in.
There is no need to add anything.
This patch also stops filtering the artifacts to only contain packages
that are actually in the repo. Thus debuginfo and source packages will
appear there.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Instead of loading the "source" modulemd, always get the final file for
each architecture from Koji.
Logging the downloaded files locally is no longer necessary, when
debugging a problem we can find the files in the respective builds in
Koji.
Tests are updated to work with new code, and an obsolete test is
removed.
JIRA: COMPOSE-3147
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Sometimes the release version can be more specific than what should be
exposed to users of the boot iso.
JIRA: COMPOSE-3295
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This adds new `Runroot` class and new `runroot_method` option which makes
it possible to choose between two currently available runroot methods:
- Local
- Koji
The main goal of this commit is to make it possible to add new runroot
methods in the future and this is the first step in that direction.
Signed-off-by: Jan Kaluza <jkaluza@redhat.com>
Behavior before this change: debuginfo was added based on source RPMs.
Pungi would get all debuginfo for all architectures that include at
least one binary package. This had a consequence that if foo-x.x86_64
and foo-x.i686 from the same built were included, foo-y-debuginfo.i686
would be included despite foo-y only being present for x86_64.
The patch changes this to work on binary package level: for each
included package `x`, check if there is `x-debuginfo` or
`x-debugsource`, and include them. Packages added in this way have to go
through one iteration of the solver, to account for cases such as
`x-libs-debuginfo` depending on `x-debuginfo` (with only `x` starting
this chain).
To make it slightly faster, the invocation of fus is changed to only
process newly added package in each iteration. It should have no effect
on the results, and subsequent iterations are much faster if they don't
process the same stuff again and again.
JIRA: COMPOSE-3247
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The file in old compose does not change, there is no need to load it
again for each tag.
One consequence of this change is that the same cache will be used by
all package sets. They add stuff to the cache as they use it. However
that should not be a problem for the same reason it's okay to use the
cache in the first place. If two packages have the same path, they are
actually the same file and it's okay to reuse the data.
JIRA: COMPOSE-3374
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Also remove the useless listTaggedRPMs call which has been used *only*
to catch the very rare error which happened from time to time when
we used PDC in Pungi few years ago. This rare error is not relevant
anymore now.
Signed-off-by: Jan Kaluza <jkaluza@redhat.com>
If the config is loaded from JSON, we will get list instead of tuple.
The validation rule does not really care whether it's a list or tuple,
it only enforces there are two strings. The definition is renamed to be
a bit more descriptive.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
We run a thread for each task, not one per variant. If there are
multiple containers in a single variant, the logs contain confusing
entries about starting the phase multiple times.
2019-02-28 01:58:54 ... [BEGIN] OSBS phase for variant Foo
2019-02-28 01:58:54 ... [BEGIN] OSBS phase for variant Foo
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Translate the using configured patterns, and give OSBS a repo file with
that URL.
JIRA: COMPOSE-3290
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
If a repo or install tree is specified as an absolute path on the local
filesystem, we should either translate it using the configured mappings,
or if no mapping matches, it should be return unchanged. A variant name
can not start with a slash, so attempting that translation does not make
much sense.
JIRA: COMPOSE-3290
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The default is the original behaviour. On F30+ a new option should be
added to config to make it work.
Over time as users move to this option (which requires a new enough
version of lorax), the default should be switched and then the option
removed.
Resolves: https://pagure.io/pungi/issue/1126
Merges: https://pagure.io/pungi/pull-request/1128
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This patch allows the configuration to express maximum expected size for
ISOs created in createiso and extra_isos phases. If the image is larger
than this limit, a warning is emitted in test phase. The compose itself
is not affected in any way.
JIRA: COMPOSE-2824
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This patch does not do any actual pushing. It will only extract data
about push targets from the main configuration and store it together
with exact Koji NVR in a well-defined location, and also send the data
to message bus for another service to handle.
JIRA: COMPOSE-3228
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
For binary packages the filters are handled at the depsolver level.
However sources and debuginfo is added later in the process, so the
filters have to be explicitly applied.
JIRA: COMPOSE-3114
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
If the hybrid solver is used in a situation where there are modules in
lookaside repo, but not in the compose itself, it will fail to detect
any platform. Since we are already opening the module repodata, we can
retrieve platforms from all modules in there as well.
If there are conflicts (e.g. multiple modules depending on different
platforms), an error will be reported.
JIRA: COMPOSE-3277
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
If there are variants that depend on another, they should be processed
in order to make sure packages from the base variant are linked first.
That way the srpm cache is populated and any package in layered variant
but with source in base will have access to correct epoch information.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
If there are multiple matching configuration blocks, we should take the
value that is defined in the last one, but only if it actually is there.
That's how it works for other options.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This is really an oversight. The list of packages from prepopulate list
should be treated the same as if the packagees were coming from comps or
additional packages.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This should tell lorax what arch to use and avoids fragile detection
based on contents of source repo.
It uses the same logic buildinstall phase uses to get the buildarch.
Related: https://pagure.io/teamsilverblue/issue/67
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
It may make sense to break a big compose into smaller chunks that can be
done independently. This script allows describing the smaller parts,
runs them with correct dependencies and arranges the result to look like
a single big compose.
All parts use the same koji event, that is either obtained from Koji, or
from command line argument.
JIRA: COMPOSE-2654
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
We already make this possible for the ostree installer, but it was
missing from the traditional one. The default behaviour is to let lorax
decide, but if user knows better, they can overwrite in configuration.
JIRA: COMPOSE-3188
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
If configuration requests a different ref than what treefile has, a
wrong message can be sent.
If the treefile is in JSON, the local copy will be updated in-place and
it works. However with YAML the updated version is still written as JSON
and thus we are still sending the original value.
Fixes: https://pagure.io/pungi/issue/1092
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Instead of multiple places handling the same thing duplicating the
logic, it's better to do it once upfront. This allows easy caching of
the results.
Additional advantage of this approach is that the config dump will
include resolved URLs. The original reference will still be available in
the copy of the original config.
JIRA: COMPOSE-3065
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This should be on top level of the ISO, and list files added
specifically to the ISO. If there's anything inherited from one some
variant, the files will be listed in metadata in the variant directory.
JIRA: COMPOSE-3069
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
They are not always wanted, so let's not include them by default.
There's a new option to include the same files that extra files phases
uses, or alternatively they can be configured specifically and put into
the variant subdirectory.
JIRA: COMPOSE-3084
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The environment in comps for a variant can refer to groups in parent
variant (either for addons, or because of other configuration). We
should not remove the groups in this case.
This requires changes in two places:
* teaching `comps_filter` about groups that should not be removed
* fixing writing comps so that it does not actually change the data as
well
JIRA: COMPOSE-2612
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The initial implementation is very coarse. It enables it for all
variants and all modules. That is not always wanted.
With this patch, the config file has to explicitly list the devel
modules for each variant that should have it. The variant must be
configured also to include the non-devel module (but the module may be
in lookaside so it won't be included).
We now include module metadata in the internal lookaside repo, so that
this whole thing works if one variant is built on top of another.
JIRA: COMPOSE-3034
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
When the configuration lists `*` in `additional_packages`, it has a
special meaning. If it's passed to fus directly, it will use it to match
all modules and RPMs that are not masked by a package available in some
default stream. Neither is good. We don't want it to match modules, and
we want even the masked packages.
The fix is to expand the wildcard to a list of NVRs and give that to
fus. It should include the package even if it is masked.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
There is no repoclosure that correctly understands modules. The best
thing we can offer is the errors reported by the depsolver.
JIRA: COMPOSE-2321
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
If a multilib package fails to be added (broken dependencies, or it
doesn't exist at all), we want to track it and eventually stop the
iterations.
Merges: https://pagure.io/pungi/pull-request/1071
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Stream can contain dash sign and when MBS imports such NSVC to Koji, the
dash is replaced with underscore. The current Pungi code does not
respect that and tries to use the stream from Koji directly, which
results in wrong stream being using in some Pungi internal data.
In this PR, the NSVC is taken from module metadata section of CG Koji
build, which contains real stream including the dashes.
Merges: https://pagure.io/pungi/pull-request/1072
Signed-off-by: Jan Kaluza <jkaluza@redhat.com>
Without this we don't have artifacts from all modules when the first
modular variant is solved. That makes some modular packages appear as
bare.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
If there are two variants with different module sets, the missing
modulemd from variant B causeing depsolving in variant A to consider the
packages as non-modular. That is wrong.
Related: https://bugzilla.redhat.com/show_bug.cgi?id=1640125
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Instead of having one giant command line, write the long list into a
file and pass that to the solver.
The items on the input list are sorted for easy processing.
JIRA: COMPOSE-3012
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
We can't drop the whole package set once the first solver iteration
finishes, because it runs for each arch separately and we need the data
for each of them. We can however delete the arch specific portion.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
If the file is generated, Pungi will modify it at the end of
buildinstall phase. We need to point ISO creation to the modified file,
otherwise the checksum in .treeinfo will be incorrect.
It's sufficient to just update the graft point to correct file, copying
is not needed.
JIRA: COMPOSE-2976
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The function loads existing treeinfo, removes reference to boot.iso and
adds [media] section. This is the basic tweak that should happen for all
ISOs. Additional changes depend on the actual content.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
If we want to include the -devel modules, the original modules should be
present for the solver. However if we put them in both local and
lookaside repos, fus will get confused. Let's not include modules that
are in lookaside in the module repo created for the solving job.
Even if the modular packages are present in the local repo, they are
identical to the ones in lookaside, and so they should not make it into
the result anyway.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
It's possible we ask to include module X, but it's in lookaside and as
such it should not be in the output. Therefore we need to remove it from
the variant.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
By default nothing should change. This patch adds a new config option
that enables all this new craziness:
* it turns of applying module filters at pkgset level
* it creates new modules and adds them to the compose
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The module has same S:V:C, but the name is suffixed with `-devel`. The
module should contain all packages from the module koji tag that were
not included in the actual module.
The devel module has the same dependencies as the regular module, but
also additionally depends on the original module. The API and profiles
are cleared in the new module.
In the metadata it shows the same koji tag.
The test if package goes to the module is refactored to a function to
make work with the negated case a bit easier.
There may be unneeded multilib packages in the -devel module, because
there might be buildtime dependencies between things that we don't see.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Clear API and profiles
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
A repo does not necessarily have the location_base attribute if the
packages are next to the repodata. This can easily happen for lookaside
repos.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The main variant is already available, this patch adds information about
additional variants that are included in the image.
JIRA: COMPOSE-2917
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The pool is created in multiple places, and the process is always to
create an instance and add workers to it. Let's abstract the loop in a
method.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
There's an environment variable that can suppress printing of PID for
every debug message. It provides us with no real information and only
makes the log larger.
JIRA: COMPOSE-2973
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This PR adds new pkgset_koji_builds configuration option.
This option allows setting list of extra Koji build NVRs which will be
included in a compose. This is useful in two cases:
a) It allows generating standard composes with few packages update to
certain version to test how the compose behaves when the package is
updated for real.
b) It allows generating compose consisting only from particular builds
when pkgset_koji_tag = '' or None. This is useful when one want to
regenerate the compose with packages which are not tagged in single Koji
tag. This is very useful for ODCS when reproducing old composes.
Merges: https://pagure.io/pungi/pull-request/1049
Signed-off-by: Jan Kaluza <jkaluza@redhat.com>
There are three different cases:
* we expect commitid and it's there
* we expect commitid and it's missing
* we don't expect commitid
This patch helps differentiate between the second two. In former one we
should report an error and mark the phase as failed. The latter is
perfectly fine and no error should be reported
Fixes: https://pagure.io/pungi/issue/1046
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
There should not be multilib arches when checking if noarch package is
compatible with current arch. Otherwise we might be excluding a package
from x86_64 just because it does not work on i686.
JIRA: COMPOSE-2885
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The multilib library expects us to ask about the candidate package for
another arch (should I include this as multilib?) and not the current
arch (should I include other arches for this package?).
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
There can be multiple modules with the same name and stream. They should
all have the same version, but will have different contexts. Fus takes
only N:S as input, but should pull in all matching modules. We just need
to give it correct data in the repo.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This patch changes the behaviour when both module tag and NSV?C? is
specified. The NSVC are used as a whitelist and only matching modules
will be included in the compose.
Additionally this patch adds filtering based on inheritance: when
finding the latest module for each N:S combination, only the top tag in
which the module is tagged is used. Even if a newer build is available
somewhere deeper in the inheritance, it's not going to be used.
Example inheritance and tagged modules
f29-compose (foo:1:2018:cafe)
└─ f29-candidate (foo:1:2019:cafe)
The compose will use 2018 version, because it's in the topmost tag.
JIRA: COMPOSE-2685
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
In the search result, we should ignore any module build that finished
after the event that we are working with.
Fixes: https://pagure.io/pungi/issue/999
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>