The pickle files are used for reusing results from old compose and the
failure should not block the compose process.
JIRA: RHELCMP-9494
Signed-off-by: Haibo Lin <hlin@redhat.com>
- Remove validation for modules obsoletes
We can have multiple obsoletes for one module
- Add unit tests to cover basic scenarios for
modules defaults && obsoletes
- Add additional check for invalid yaml file
in Defaults. Previously, empty list of default would
be returned when invalid yaml is present in Defaults
directory.
- Using MergeIndex for Obsoletes only (for now).
https://pagure.io/pungi/issue/1592
Signed-off-by: Marek Kulik <mkulik@redhat.com>
The original code could cause a source RPM to be present in two variants
that have a dependency relation.
There is always only one source repo for a variant in the final compose.
When gathering packages for a variant that depends on another variant,
we need to build a temporary lookaside repo that has similar content to
the parent variant. This lookaside only contained source RPMs for
packages present the the architecture.
This could result in duplicated SRPMs in the compose.
Example situation:
* Variant B depends on variant A.
* A contains foo.x86_64.rpm (only on x86_64)
* B pulls in subpackage foo-bar.s390x.rpm (on s390x)
Source repo for A will correctly contain foo.src.rpm. With original code
the srpm would also end up in B.src. By adding all sources to the
temporary lookaside Pungi will know that source repo for B doesn't need
to duplicate the package.
The refactoring to use a set to store the packages is meant to avoid
listing the same SRPM multiple times in the repo in the most common
situation when SRPM is listed in multiple architectures.
JIRA: RHELCMP-6002
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
- Do not reuse when there is any external lookaside repo
- Do not reuse when lookaside variant is not reused
JIRA: RHELCMP-4596
Signed-off-by: Haibo Lin <hlin@redhat.com>
When a gathering thread raises an exception, it gets forwarded to the
main thread and re-raised there. However, during this transition it
loses details about exact location of the problem.
This patch creates an extended traceback in the worker, which should
make it easier to track the problem down later.
JIRA: RHELCMP-4259
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The pkgset_koji_builds influences the gather phase, but the
change itself is not a reason to not reuse old gather phase. if
new pkgset_koji_builds value leads to significant change in input
package set, we will find that later in this function when comparing
old and new package set.
Signed-off-by: Jan Kaluza <jkaluza@redhat.com>
When list is used in gather_lookaside_repos, the Pungi currently
fails with an exception. This is caused by inverted condition
in the code which tries to filter-out the lookaside repos
generated during the Pungin execution pointing to different
compose variants.
Signed-off-by: Jan Kaluza <jkaluza@redhat.com>
I've analysed multiple nigthly composes and often the only difference
in the configuration between two nightly composes is different
`product_id` commit hash.
The `product_id` is used in later `createrepo` phase and does not
influence the gather phase at all. I therefore think it can be
whitelisted in gather phase reuse code.
Signed-off-by: Jan Kaluza <jkaluza@redhat.com>
- Get also requires/provides of RPMs in package set.
- Store the results of gather phase as pickle file.
- Reuse old gather phase results in case Pungi configuration
did not change, the "names" of RPMs in global package set
did not change and their requires/provides did not change.
- Add `gather_allow_reuse` option to enable this feature.
Signed-off-by: Jan Kaluza <jkaluza@redhat.com>
Add gather_allow_reuse, add more tests and better handling of gather_lookaside_repos.
When there is an exception in gathering (such as after seeing unsigned
packages in deps method), the exception was lost and the compose
continued to run until it tried to access the result and crashed on
KeyError.
Relates: https://pagure.io/releng/failed-composes/issue/587
JIRA: COMPOSE-3986
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This should make it possible to only import the library only when it's
really needed.
DNF does not work with libmodulemd v2. If we import libmodulemd2 and
then dnf, the program will just hang forever. We only need DNF in
pungi-gather, where libmodulemd is not needed, and also where we do need
libmodulemd, we don't have DNF.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This patch adds a new config option. This is expected to be a name of
subdirectory in the repo with module defaults. If supplied, overrides
from that location are loaded every time defaults are loaded.
This raises the minimal required version of libmodulemd to 2.8.0
JIRA: COMPOSE-3828
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The repo was used to speed up creating lookaside repo from a variant.
This uses a similar approach as createrepo phase: selecting the last
available package set and using that data.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Once a package set repo is written to disk, let's use this object that
connects the repository path with the mapping of packages.
This change also makes it explicit where the dependency on package set
repos are. In the original codebase, any part of code could generate a
path to the repo, even if that repo has not yet been written.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This opens up a path to having multiple package sets in the compose. The
pkgset phase now creates a list of them (although at this time there is
always a single item in that list).
Any consumer of the package sets objects is updated to handle a list.
Generally this means an extra loop.
JIRA: COMPOSE-3620
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This was already discouraged to not be used, and is a bad idea in
current setup anyway. Removing this can simplify the code.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This reverts commit ac15f21135.
It is still needed if nodeps gather method is used. It simply returns
all packages listed in all modules.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1708661
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Instead of validating both variants exist, let's just check the
existence of only the variant that is being used as a lookaside.
If the configuration says Foo depends on Bar, the error is reported only
if Foo exists but Bar does not. Any other situation is silently ignored.
JIRA: COMPOSE-3393
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This source does not really return anything useful. It was necessary to
process the source modulemd to fill in list of RPMs. Since we now get
the final files from Koji, this is not needed anymore and the source can
be dropped.
This change requires a lot of tweaks for test.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
If there are variants that depend on another, they should be processed
in order to make sure packages from the base variant are linked first.
That way the srpm cache is populated and any package in layered variant
but with source in base will have access to correct epoch information.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The initial implementation is very coarse. It enables it for all
variants and all modules. That is not always wanted.
With this patch, the config file has to explicitly list the devel
modules for each variant that should have it. The variant must be
configured also to include the non-devel module (but the module may be
in lookaside so it won't be included).
We now include module metadata in the internal lookaside repo, so that
this whole thing works if one variant is built on top of another.
JIRA: COMPOSE-3034
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
There is no repoclosure that correctly understands modules. The best
thing we can offer is the errors reported by the depsolver.
JIRA: COMPOSE-2321
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Without this we don't have artifacts from all modules when the first
modular variant is solved. That makes some modular packages appear as
bare.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
If we're running in debug mode and the file is already present, it
should not be modified. This means that in order to rerun the actual
gather phase the file needs to be manually deleted first. However the
much more common use is to skip gather phase (because only images should
be re-run). In that case the manifest will be preserved correctly.
JIRA: COMPOSE-2756
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
When getting list of initial packages, only run the source and do
nothing else. Additional package, system-release etc. will be added only
to comps.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This patch adds a new gather method called `hybrid`, which uses a `fus`
binary, which must exist somewhere on the `$PATH`. It will call it
multiple times to add multilib packages.
The solver can handle packages, modules and comps groups as input.
However comps groups are never passed in. Pungi will expand it to a list
of packages to avoid issues with comps handling in fus. It ignores
optional packages, and if the group mentions a package that does not
exist, nothing else from the group is included.
Multilib is also handled outside of fus. Pungi will run it, parse the
packages from output, determines multilib packages and adds them as
input. Then it runs the solver again. This is done until nothing new is
added. Usually two passes should be enough.
Source packages and debuginfo are added as a final step. All debuginfo
packages from any included source are added. If the source or debuginfo
package is included in any lookaside repo, it will be skipped.
The tool expects to get a platform stream that should be provided for
modules to depend on. Pungi looks into the modules and gets the platform
from there. If there are more requests, an error is raised.
There is some missing functionality and options that are ignored.
Particularly these are:
* gather_fulltree
* gather_selfhosting
* greedy_method
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
It does not exist on Python 3. Converting the exception to string works
identically.
The validate methods on many phases are simplified by not calling the
parent (which does not do anything).
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Lubomír Sedlář
Haibo Lin
Marek Kulik
Filip Valder
Dominik Rumian
Jan Kaluza
Ondrej Nosek