This patch uses the `--can-fail` option of koji command line. If only
optional arches fail, the task will report as success. Failures on
compose box side are ignored if and only if all architectures are
optional.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Buildinstall only runs for top-level variants. Addons, optionals and
integrated layered products must reuse install tree from their parent,
because otherwise there would be no boot.iso.
Fixes: #472
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Update pungi-make-ostree to supourt sub-command 'tree', which is just
as the original feature of pungi-make-ostree to compose OSTree tree.
With the change we can add other sub commands later to build other
OSTree artifacts, like the installer image.
Inaddtional to the change, now the the 'tree' command can accept an
optional '--extra-config' parameter to update the original tree
configuration with extra configurations specified in a json file
before composing the OSTree tree.
Example:
pungi-make-ostree tree --repo=/ostree --treefile=/path/to/treefile \
--log-dir=/path/to/log --extra-config=/path/to/extra-config.json
The extra-config file can contains the same configuration as OSTree
phase, the difference is it doesn't understand variant UID as source
repo since it's not ran in the chain of phases. A valid configuration
can be like:
{
"source_repo_from": "http://example.com/repo/x86_64/Server",
"extra_source_repos": [
{
"name": "optional",
"baseurl": "http://example.com/repo/x86_64/optional",
"exclude": "systemd-container",
"gpgcheck": False
},
{
"name": "extra",
"baseurl": "http://example.com/repo/x86_64/extra",
}
],
"keep_original_sources": True
}
The OSTree phase is updated to move out the task of updating treefile,
instead of that, it writes the extra configurations to a json file,
then 'pungi-make-ostree tree' will take it by option '--extra-config'.
Signed-off-by: Qixiang Wan <qwan@redhat.com>
Phases createiso, liveimages, image_build, ostree_installer and osbs are
done in parallel, logs from these phases are mixed and and it's not
obvious which log message belongs to which phase. This change adds phase
name in log message for these phases.
The new mixin 'PhaseLoggerMixin' is added to extend a Pungi phase with a
logging logger which copy handlers from compose's logger but with
formatter changed.
Fixes: #58
Signed-off-by: Qixiang Wan <qwan@redhat.com>
Sometimes addtional repos are required to get necessary packages for
composing OSTree repository. For example, RHEL doesn't have an 'Everyting'
variant, so composing OSTree repository from any of the RHEL variants
won't work, addtional source repos need to be enabled to achieve that.
The new option "extra_source_repos" enable the ability of allowing extra
source repos.
And a new option 'keep_original_sources' is introduced to keep the
original repos found in tree config file, if this is enabled, Pungi
will not remove the existing source repos from the tree config file,
just add new repos of "source_repo_from" + "extra_source_repos" to
the existing repos.
Signed-off-by: Qixiang Wan <qwan@redhat.com>
When a file is exported from an RPM in the compose, and there is no
matching RPM in the package set, we want a nice error message.
Fixes: #460
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The `get_variants()` method had a `recursive` argument with default
value of `False. However, this argument had no effect and the method
always returned all variants recursively.
We can just drop the argument. All callers are updated to not supply the
argument. Should any need for getting the top-level variants only arise,
they can be accessed as the `variants` attribute directly on the Compose
object.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The code to search for install tree and repo for image-build and
live-media was only looking at top-level variants. Addons, optional or
integrated layered products could not have been found. This would lead
to error messages such as "There is no variant Server-optional to get
repo from when building live image for Client" even though the variant
exists.
Various tests are updated to exercise this edge case.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Tell lorax to use a specific directory for log files so that we preserve
them despite koji not having any idea about them.
Fixes: #457
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Added new option '--version' to pungi-make-ostree, and this can be
enabled in ostree settings with 'version'. The version string will be
added as versioning metadata if this is specified.
Signed-off-by: Qixiang Wan <qwan@redhat.com>
Added new option '--update-summary' to pungi-make-ostree, and this can
be enabled in ostree settings with 'update_summary'. A summary file will
be generated (or re-generated if it was presented in an existing ostree
repo) when it is enabled.
Signed-off-by: Qixiang Wan <qwan@redhat.com>
'mount -o loop' requires root privileges, guestmount from
libguestfs-tools-c package can work without root privileges.
Fixes: #19
Signed-off-by: Qixiang Wan <qwan@redhat.com>
If the media is bootable, we can not split it. Instead we will create an
ISO that is too big and issue a warning (aborting the whole compose
would be too much).
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The older buildinstall method fails if it sees ppc64p7 instead of ppc64.
Nothing changes for composes using Lorax.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
It really is just a group of independent functions, so we can simplify
it by removing the unused wrapper class. Instead of importing the
wrapper, instantiating it and calling its methods we can import the
module and call its functions directly.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Instead of overloading the `dvd` value, use new value `ostree` that can
be overridden by a config change.
Fixes: https://pagure.io/pungi/issue/418
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
to complement https://pagure.io/koji/pull-request/162 we need to adjust pungi
rpm-ostree uses bublewrap that does not work in mock. --new-chroot to mock
enables the use of systemd-nspawn instead of chroot resulting in working
rpm-ostree again
Signed-off-by: Dennis Gilmore <dennis@ausil.us>
The address is no longer correct. We can just as well simply point to
the web page describing the license.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The same information can be inferred from definitions in variants.xml:
if the variant has no groups defined, we include packages from all
groups. By the same logic we can also include all groups in the comps
file.
The config validation is updated to give a hint on how to remove the
option from the configuration.
Relates: #29
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
It does not make sense for this phase to be skipped. If there are any
images, we need to generate the checksums so that writing metadata
works. If there are no images, the phase does not do anything and is
therefore very fast.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This patch adds a new config option createrepo_use_xz, which when set to
true will cause createrepo to compress sqlite databases with xz. The
default setting is False.
Fixes: #387
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Introduces a new metadata file to track arbitrary files added during the
extra-files phase. This file is placed in the root of each tree and is
called ``extra_files.json``. It is a JSON file containing a single
object, which contains a "header" key with an object describing the
metadata, and a "data" key, which is an array of objects, where each
object represents a file. Each object contains the "file", "checksums",
and "size" keys. "file" is the relative path from the tree root to the
extra file. "checksums" is an object containing one or more checksums,
where the key is the digest type and the value of that key is the hex
digest. Finally, the size is the size of the file in bytes.
For example:
{
"header": {"version": "1.0},
"data": [
{
"file": "GPL",
"checksums": {
"sha256": "8177f97513213526df2cf6184d8ff986c675afb514d4e68a404010521b880643"
},
"size": 18092
},
{
"file": "release-notes/notes.html",
"checksums": {
"sha256": "82b1ba8db522aadf101dca6404235fba179e559b95ea24ff39ee1e5d9a53bdcb"
},
"size": 1120
}
]
}
Signed-off-by: Jeremy Cline <jeremy@jcline.org>
Fixes: #295
If the configuration does not specify version for images or live media,
Pungi will create a default value based on `release_version`. If label
is used for the compose, the milestone from it will be appended to the
version (unless it's RC).
This change is backwards compatible: nothing changes when version is set
in configuration. If the version was missing before, building the
artifacts would fail. With this patch, default values will be supplied.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The schema is written in Python to reduce duplication. When
configuration is loaded, the validation checks if it's correct and fills
in default values.
There is a custom extension to the schema to report deprecated options.
The config dependencies are implemented as a separate pass. While it's
technically possible to express the dependencies in the schema itself,
the error messages are not very helpful and it makes the schema much
harder to read.
Phases no longer define `config_options`. New options should be added to
the schema. Since the default values are populated automatically during
validation, there is no need to duplicate them into the code.
The `pungi-config-validate` script is updated to use the schema and
report errors even for deeply nested fields.
The dependencies are updated: pungi now depends on `python-jsonschema`
(which is already available in Fedora).
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Currently the main log only says the phase started and finished. With
this patch each created image will be mentioned by its name, version,
release and arch.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Before the task is started, the output directory is checked and if it
exists and is not empty, the runroot task will be skipped. This is meant
for debugging when restarting the same compose. Under usual
circumstances, the directory will not be created in the first place.
The runroot task will start by removing the output directory. This way,
if koji restarts the task, lorax will not fail.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Originally, the idea was to remove non-blocking images that failed the
check. They were only removed from the manifest, which creates some
confusion as to what is going on. With this patch, a failed check on
non-blocking deliverable will only print an error message.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
When ISO is marked as failable and check fails, the compose would still
be aborted. This patch fixes that
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Instead of installing pungi itself in the runroot, we can prepare the
commands to be run on compose box, write the shell script into work/
directory, which is mounted in the chroot, and execute that. This way
there is no business logic in runroot (except for finding lorax
templates).
The main advantage of this approach is that we don't need to pull any
extra dependencies into buildroot.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
When package has incompatible arch for a tree, the same error message
could be raised from two different places. This patch adds more
information to the message, so that it is easier to find the actual
problem.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This is a breaking change as big part of current failable_deliverables
options will be ignored.
There is no change for buildinstall and creatiso phase.
Failability for artifacts in other phases is now configured per
artifact. It already works correctly for ostree and ostree_installer
phases (even per-arch). For OSBS phase there is currently only a binary
switch as it does not handle multiple arches yet. When it gains that
support, the option should contain list of non-blocking architectures.
For live images, live media and image build phases each config block can
configure list of failable arches. If the list is not empty, it can
fail. Once we have a way to fail only some arches, the config will not
need to change.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Atomic Reactor does not honor this option. In the future we might need
to reintroduce this feature, but given that it does not work in the
current form it is better removed.
Fixes: #348
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
ISO image without MBR and GPT can still be bootable if it has an El
Torito boot catalog. The test phase must accept such images.
This slightly defeats the point of the check: to verify the ISO is
hybrid. However, based on the metadata we have no way to actually tell
if the image is supposed to be hybrid.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Make all imports either use full package name starting with `pungi` or
use explicitly relative import. This will avoid issues when importing a
module that shadows another module on PYTHONPATH.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This lives now in pungi.util. It was copied there long ago and all the
places that reference it reference it in that location.
I think this code in pungi.phases.pkgset is unused and can be removed.
The other function moved to the common module.
Signed-off-by: Ralph Bean <rbean@redhat.com>
Instead of overwriting the same log file, make sure we keep all the logs
for debuginfo, source and binary packages.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This patch makes it possible to use different style format placeholders.
Instead of the percent encoding it is now possible to use simple curly
braces.
%(foo)s -> {foo}
The old format is still available.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
If the `<groups></groups>` section is not specified in the variants XML
file, all groups will be used in this variant. The section must be
omitted completely, not just empty. This is (and was) correct according
to the DTD, it just lead to crash before.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Even if gather phase is skipped, it will still generate a rpms.json
metadata file. It will have no payload, but the header structure is
there.
Createrepo phase had to be updated to ignore variants that have no RPMs
listed in metadata.
There is one more fix for writing treeinfo files: if repomd.xml files
are not generated, it will no longer crash.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Instead of running the copy function for all variant.arch pairs
unconditionally, only do it if there is something to do. This makes the
log more understandable.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
It will take RPM repo from a variant in this compose and a Dockerfile
from configured git and use it to build an image.
The build images are uploaded to some a Docker registry by OSBS and are
not directly part of compose (because there is no export function).
There is a new metadata file `osbs.json` that has some information that
can be used to find the image.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Instead of iterating over image manifest, loop through all variants and
arches and see if there are any images. This avoids a crash for variants
nested under other variants (layered products, optionals or addons).
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Add a documented and tested config options for setting ISO parameters
instead of hardcoding magic values.
Fixes: #256
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This patch also fixes a bug where packages in hashed directories would
not be recognized as such and would not be placed after other files.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Instead of putting everything to <variant>/<arch>/iso, move images/,
EFI/ and isolinux/ subdirs to <variant>/<arch>/os. The nicely named ISO
image is still in the original location.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
On Python 2.6, it requires the format placeholder to have explicit index
of argument, so using % formatting is easier.
There are a couple places where the method is still used because the
same argument is used twice.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Each variant.arch combination can have multiple ostree repos configured,
so we need to make sure the filesystem paths don't clash.
The paths used now are:
logs/<arch>/<variant>/ostree-<x>/
work/ostree-<x>/config_repo
The x stands for a number identifying the task. It has no relation to
actual contents of the repo.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Make sure the directory exists before calling Koji (because otherwise
the mounting will fail). Update the runroot script to initialize the
repo when there are no files in the target destination.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The performed checks:
* If format is ISO, the file must have correct magic string
* If it's bootable, there must be MBR or GPT
When a check fails on any failable deliverable, it will be logged and
the file removed from metadata (it will still remain on the disk). This
required a change to write the images.json file later (after test
phase).
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The config object from Kobo does not allow keys starting with
underscore, so we prefix it with `private_` instead.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
There is a lot of mock objects needed: we bypass calls to Koji, use a
mock FileCache that does not need valid RPMs on disk and avoid any
multithreading.
The test data in tests/fixtures/tagged-rpms.json comes from Koji. It is
filtered down to only a few packages to make it manageable.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This patch also fixes the bug where using a preconfigured Koji event
would not actually work and instead the latest event would be used.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The live_images, live_media and image_build phases have same options
that need to be specified on each image. This leads to a lot of
duplication in the config file. This patch adds global settings and
phase-level settings that allow to significantly reduce duplication.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The pungi.global.log should show subvariant for each failed deliverable
(if available). When the compose finishes, there is a new log file in
logs/global/deliverables.json containing details about all deliverables
as triples of (variant, arch, subvariant).
* `required` lists all deliverables that can not fail
* `attempted` lists all failable deliverables that were started
* `failed` is a subset of `attempted` and only contains deliverables
that failed
If the compose fails, the lists may be incomplete.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
We can't assume the templates will just be available. This patch adds a
configuration option to point to the git repo with them. It will be
cloned at compose box and relative paths to templates will be made
absolute respective to this clone.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
and pass absolute path to the config into runroot. This could avoid the
problem of not being able to clone the repo in runroot.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
A couple arguments passed from phase to worker threads were not
duplicated. Only one copy is passed now.
A test case was added both for the phase itself and for worker thread as
well.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Instead of running a long command line in the runroot (or locally), move
all that work into a separate script that will be installed. This means
chroot will need to install pungi.
Everything should work as it did before. The only exception to this is
that there is logic to find lorax templates instead of harcoding the
location. This is done using a separate script.
Related: #230Fixes: #231
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This uses a new common function that will ensure consistent logging
without duplicating the functionality all over the place.
A couple tests are updated to verify that correct data is logged.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
When the koji tasks fails but produces some output (e.g. .discinfo),
copying the artifacts would crash the compose. That should not happen if
the variant/arch is marked as failable.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This phase runs lorax with extra templates in Koji runroot task, links
the boot.iso to proper location in compose directory and adds the
installer iso to image manifest. This phase runs concurrently with live
media etc.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This phase runs the script to make ostree repository in koji runroot
task. It runs right after regular yum repos are created.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Move getting of the precomputed value to a single place in Compose
class. The value now has format `date[.type_suffix].respin`.
Resolves: rhbz#1319924
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Print the subvariant together with variant UID and arches. This should
make the global log easier to understand.
The output of koji command should now be split into multiple files in
logs/{arch}/livemedia-{variant}-{subvariant}.{arch}.log instead of
having them all in one file.
The tests were updated to use more sensible value for the subvariant
field.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This should generate the same volume id in buildinstall and createiso
phases, with isolinux.cfg being consistent as well.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Dennis added a 'subvariant' property to the Docker image config,
but we weren't using it, we were just hard-coding the variant
as the subvariant...and doing it wrong, as well, using the
variant object rather than its uid property.
This fixes both problems: we'll now use the explicitly set
image config 'subvariant' property if there is one, otherwise
we use the variant.uid as the subvariant.
Note this is a high priority fix, as it broke F24 compose today.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This adds the new 'subvariant' property to all images produced by Pungi.
For most image types this is the same as the variant, for now. For
live_images and livemedia_phase, the image config may specify
'subvariant' and the value will be used if present, otherwise the
variant name will be used.
We also now synthesize the Koji image 'name' for live and appliance
images if the image config doesn't specify it, and use a name that
complies better with the naming policy for ARM disk images (partially
resolving https://pagure.io/pungi-fedora/issue/7 ).
This is completely untested as yet, just bashing stuff out on a Sunday,
will work more on it tomorrow.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
Check once before iterating through the variants. This greatly
simplifies the tests as each function now has one less code path.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
When creating the comps repo, use a separate log file for each variant
instead of overwriting the same global file again and again.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The configuration can specify a list of variants for which the original
comps file will be copied without any modification.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This patch adds configuration option to change disc type used in file
name. So far this can only be changed for link to images/boot.iso.
Resolves: #109
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Lubomír Sedlář
Qixiang Wan
Colin Walters
Dennis Gilmore
Patrick Uiterwijk
Jeremy Cline
Lubomír Sedlář
Ralph Bean
Daniel Mach
Dennis Gilmore
Adam Williamson