Split out a smaller function that receives a git repo URL and ref and
returns the commit id. The caching resolver class is modified to use
this second function if branch is given to it.
The new function checks if the ref received already looks like a commit
ID, and if so it does not attempt to do anything with it.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Before this patch, there were two code paths: either getting the only
the wanted content by calling git-archive, or cloning the repository and
copying the files.
Both these approaches have the downside of not allowing retriving
content from a specific git commit.
The workaround is to create a new empty repo (in the location to which
we cloned previously), fetching the specific commit to there and then
checking it out.
This supports any commit and works identically for any protocol. The
downside is that all files in that commit will be downloaded. It should
be no worse than the git-clone path, but can result in bigger transfers
than git-archive.
Unfortunately this is only supported with git 2.5+. On older version
fetch will fail with no error message (tested with 1.8.3). This can be
used to fall back to full clone. This fallback is clearly suboptimal in
terms of data transfer, but it should work reliably.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Translate the using configured patterns, and give OSBS a repo file with
that URL.
JIRA: COMPOSE-3290
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
If a repo or install tree is specified as an absolute path on the local
filesystem, we should either translate it using the configured mappings,
or if no mapping matches, it should be return unchanged. A variant name
can not start with a slash, so attempting that translation does not make
much sense.
JIRA: COMPOSE-3290
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The default is the original behaviour. On F30+ a new option should be
added to config to make it work.
Over time as users move to this option (which requires a new enough
version of lorax), the default should be switched and then the option
removed.
Resolves: https://pagure.io/pungi/issue/1126
Merges: https://pagure.io/pungi/pull-request/1128
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This will avoid possible conflicts. The names for parts are chosen by
users, and if we decide to add more options in the future, this can
become handy.
JIRA: COMPOSE-3285
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This patch allows the configuration to express maximum expected size for
ISOs created in createiso and extra_isos phases. If the image is larger
than this limit, a warning is emitted in test phase. The compose itself
is not affected in any way.
JIRA: COMPOSE-2824
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This patch does not do any actual pushing. It will only extract data
about push targets from the main configuration and store it together
with exact Koji NVR in a well-defined location, and also send the data
to message bus for another service to handle.
JIRA: COMPOSE-3228
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
For binary packages the filters are handled at the depsolver level.
However sources and debuginfo is added later in the process, so the
filters have to be explicitly applied.
JIRA: COMPOSE-3114
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
If there are multiple matching configuration blocks, we should take the
value that is defined in the last one, but only if it actually is there.
That's how it works for other options.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This is really an oversight. The list of packages from prepopulate list
should be treated the same as if the packagees were coming from comps or
additional packages.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This should tell lorax what arch to use and avoids fragile detection
based on contents of source repo.
It uses the same logic buildinstall phase uses to get the buildarch.
Related: https://pagure.io/teamsilverblue/issue/67
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
It may make sense to break a big compose into smaller chunks that can be
done independently. This script allows describing the smaller parts,
runs them with correct dependencies and arranges the result to look like
a single big compose.
All parts use the same koji event, that is either obtained from Koji, or
from command line argument.
JIRA: COMPOSE-2654
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
We already make this possible for the ostree installer, but it was
missing from the traditional one. The default behaviour is to let lorax
decide, but if user knows better, they can overwrite in configuration.
JIRA: COMPOSE-3188
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Instead of multiple places handling the same thing duplicating the
logic, it's better to do it once upfront. This allows easy caching of
the results.
Additional advantage of this approach is that the config dump will
include resolved URLs. The original reference will still be available in
the copy of the original config.
JIRA: COMPOSE-3065
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This should be on top level of the ISO, and list files added
specifically to the ISO. If there's anything inherited from one some
variant, the files will be listed in metadata in the variant directory.
JIRA: COMPOSE-3069
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The files created in runroot task are owned by root by default (because
that's who is running the processes to create them). Making the results
world readable allows the compose to work, but it still can be difficult
to clean up old composes if they contain random files owned by root.
Fixes: https://pagure.io/pungi/issue/1039
JIRA: COMPOSE-2906
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Currently the `copy_all` function resolves all symlinks and crashes on
broken symlinks. Instead it should copy symlinks as symlinks.
Fixes: https://pagure.io/pungi/issue/1084
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
yaml.load is equally powerful as python pickles, and we don't
need that level of power for the ostree yaml files.
Better safe than sorry.
Signed-off-by: Patrick Uiterwijk <patrick@puiterwijk.org>
They are not always wanted, so let's not include them by default.
There's a new option to include the same files that extra files phases
uses, or alternatively they can be configured specifically and put into
the variant subdirectory.
JIRA: COMPOSE-3084
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Up to now it was possible to change the pattern for all images, but
there are use-cases where different variants might want different names.
For example there could be one main variant that should only have
product name in the ISO filename, but addons should still be marked with
variant name.
JIRA: COMPOSE-3041
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The environment in comps for a variant can refer to groups in parent
variant (either for addons, or because of other configuration). We
should not remove the groups in this case.
This requires changes in two places:
* teaching `comps_filter` about groups that should not be removed
* fixing writing comps so that it does not actually change the data as
well
JIRA: COMPOSE-2612
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The initial implementation is very coarse. It enables it for all
variants and all modules. That is not always wanted.
With this patch, the config file has to explicitly list the devel
modules for each variant that should have it. The variant must be
configured also to include the non-devel module (but the module may be
in lookaside so it won't be included).
We now include module metadata in the internal lookaside repo, so that
this whole thing works if one variant is built on top of another.
JIRA: COMPOSE-3034
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
When the configuration lists `*` in `additional_packages`, it has a
special meaning. If it's passed to fus directly, it will use it to match
all modules and RPMs that are not masked by a package available in some
default stream. Neither is good. We don't want it to match modules, and
we want even the masked packages.
The fix is to expand the wildcard to a list of NVRs and give that to
fus. It should include the package even if it is masked.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
There is no repoclosure that correctly understands modules. The best
thing we can offer is the errors reported by the depsolver.
JIRA: COMPOSE-2321
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Stream can contain dash sign and when MBS imports such NSVC to Koji, the
dash is replaced with underscore. The current Pungi code does not
respect that and tries to use the stream from Koji directly, which
results in wrong stream being using in some Pungi internal data.
In this PR, the NSVC is taken from module metadata section of CG Koji
build, which contains real stream including the dashes.
Merges: https://pagure.io/pungi/pull-request/1072
Signed-off-by: Jan Kaluza <jkaluza@redhat.com>
Without this we don't have artifacts from all modules when the first
modular variant is solved. That makes some modular packages appear as
bare.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
If there are two variants with different module sets, the missing
modulemd from variant B causeing depsolving in variant A to consider the
packages as non-modular. That is wrong.
Related: https://bugzilla.redhat.com/show_bug.cgi?id=1640125
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Instead of having one giant command line, write the long list into a
file and pass that to the solver.
The items on the input list are sorted for easy processing.
JIRA: COMPOSE-3012
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
If the file is generated, Pungi will modify it at the end of
buildinstall phase. We need to point ISO creation to the modified file,
otherwise the checksum in .treeinfo will be incorrect.
It's sufficient to just update the graft point to correct file, copying
is not needed.
JIRA: COMPOSE-2976
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The function loads existing treeinfo, removes reference to boot.iso and
adds [media] section. This is the basic tweak that should happen for all
ISOs. Additional changes depend on the actual content.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
It's possible we ask to include module X, but it's in lookaside and as
such it should not be in the output. Therefore we need to remove it from
the variant.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
By default nothing should change. This patch adds a new config option
that enables all this new craziness:
* it turns of applying module filters at pkgset level
* it creates new modules and adds them to the compose
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The module has same S:V:C, but the name is suffixed with `-devel`. The
module should contain all packages from the module koji tag that were
not included in the actual module.
The devel module has the same dependencies as the regular module, but
also additionally depends on the original module. The API and profiles
are cleared in the new module.
In the metadata it shows the same koji tag.
The test if package goes to the module is refactored to a function to
make work with the negated case a bit easier.
There may be unneeded multilib packages in the -devel module, because
there might be buildtime dependencies between things that we don't see.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Clear API and profiles
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This works around a bug where fus prioritizes first repo and thus could
include packages even if they were in lookaside.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The main variant is already available, this patch adds information about
additional variants that are included in the image.
JIRA: COMPOSE-2917
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
There's an environment variable that can suppress printing of PID for
every debug message. It provides us with no real information and only
makes the log larger.
JIRA: COMPOSE-2973
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Only local paths are supported currently. As such, `file://` can be
stripped, and for anything else we should raise an exception.
JIRA: COMPOSE-2996
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Lubomír Sedlář
Jan Kaluza
Patrick Uiterwijk