* Remove dead imports
* Remove dead code
* Fix extra empty lines
* Fix formatting
* Break too long lines
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
With this script it's possible to add additional files into an ISO file.
If the file happens to be ks.cfg, the boot configs are tweaked so that
the kickstart is actually used.
Resolves: #503
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Add a new option 'latest-link-status' to pungi-koji, if this is
specified, pungi will only create the latest symbol link to the compose
when compose's status matches the specified statuses. The status name is
case insensitive. If the option is not specified it will act as before.
Example:
pungi-koji --target-dir=_composes --config=data/dummy-pungi.conf \
--test --latest-link-status=finished --latest-link-status=finished_incomplete
Signed-off-by: Qixiang Wan <qwan@redhat.com>
The name is not displayed anywhere. Changing it to lowercase will
however avoid possible problem if we create a sublogger somewhere else
in the codebase with name based on module name. Such logger would not
have any handlers defined.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
In multiple situations we need to create temporary files or directories
that should not be preserved after compose is finished. Let's add
context managers that ensure these get cleaned up.
This fixes tests leaving garbage around in /tmp.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This a standalone script that will look into a compose and create
unified ISO for each architecture. The ISO contains RPM repositories for
all variants that have the arch.
Known issues:
* The filename does not respect settings. This is tricky because the
name could include variant name, which we don't have here (by design
of unified ISO).
* The same is true for volume id.
In order to test the feature without running actual compose, we need to
add essentially a big chunk of compose. Most of the files are empty, as
their content is never accessed.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Given the way config files can include other files, it is entirely
possible to use the same config file for both Pungi and Distill. Pungi
will however complain about unknown options.
This patch reverts part of c38bb480 and moves deprecation handling back
into schema validation. The validation method then returns a list of
errors and a list of warnings.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Phases createiso, liveimages, image_build, ostree_installer and osbs are
done in parallel, logs from these phases are mixed and and it's not
obvious which log message belongs to which phase. This change adds phase
name in log message for these phases.
The new mixin 'PhaseLoggerMixin' is added to extend a Pungi phase with a
logging logger which copy handlers from compose's logger but with
formatter changed.
Fixes: #58
Signed-off-by: Qixiang Wan <qwan@redhat.com>
The `get_variants()` method had a `recursive` argument with default
value of `False. However, this argument had no effect and the method
always returned all variants recursively.
We can just drop the argument. All callers are updated to not supply the
argument. Should any need for getting the top-level variants only arise,
they can be accessed as the `variants` attribute directly on the Compose
object.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
These are tests written by Daniel Mach originally for Distill-NG. They
are ported to current Pungi. The test repositories are committed in the
tests/fixtures/ directory. This is the same data that is used for test
compose, but the actual RPM files are not present. Some tests are
adapted from dmach's fork of Pungi.
Some of the packages are marked with a comment saying they are
important. These are the packages that the test is specifically trying
to get included in the package set. There are also explicit tests for
packages that should not be included.
Two tests are skipped for now as there is a bug preventing them from
passing. This is related to fulltree being done for packages that are
explicitly multilib.
The depsolver is called by invoking a separate executable, so the
coverage data is wrong.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
These options are in fact removed and have no effect anymore. This patch
changes the validation to print a warning that the option was removed
and what should be done instead. It no longer stops the whole compose.
The validation script still rejects configuration files with these
removed keys.
This change means we no longer check these removals with the JSON schema
(as that makes it hard to determine where exactly the problem is).
Fixes: #438
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This is tricky as this early in the process we don't know the compose
ID. The new message gives the full command line that was called.
Relates: #439
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Once we have the checksums, nothing else will change in the metadata. We
should make sure it is on disk as soon as possible.
Fixes: #436
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
We can get the version using same logic as we do for pungi-koji. This
means one less place to bump the version during release.
Fixes: https://pagure.io/pungi/issue/406
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The address is no longer correct. We can just as well simply point to
the web page describing the license.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
We need both full dump and the copy of original file. Having just the
copy is not sufficient because while it preserves comments and
formatting, there can be include statements for other files and those
are not copied.
With this patch we create the dump in the same way as before, and
additionally create a copy of of the config file specified on command
line.
Fixes: #398
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The schema is written in Python to reduce duplication. When
configuration is loaded, the validation checks if it's correct and fills
in default values.
There is a custom extension to the schema to report deprecated options.
The config dependencies are implemented as a separate pass. While it's
technically possible to express the dependencies in the schema itself,
the error messages are not very helpful and it makes the schema much
harder to read.
Phases no longer define `config_options`. New options should be added to
the schema. Since the default values are populated automatically during
validation, there is no need to duplicate them into the code.
The `pungi-config-validate` script is updated to use the schema and
report errors even for deeply nested fields.
The dependencies are updated: pungi now depends on `python-jsonschema`
(which is already available in Fedora).
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The pungi-createiso script should have been removed in f37a14fb, but was
forgotten. The script is obsoleted by a new method in which ISOs are
created. It's now broken as it calls methods that no longer exist.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This should help with debugging by providing better information on which
Pungi version created the compose. In development, the version will show
output of git describe, in production it asks which version is installed
in site-packages/. The egg-info directory must be installed for this to
work.
It is no longer necessary to synchronize version in `setup.py` with
`pungi/__init__.py`.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
It got broken in commit 8323a735 which added a requirement for a compose
to have valid paths. This patch adds that with somewhat dummy values.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Instead of installing pungi itself in the runroot, we can prepare the
commands to be run on compose box, write the shell script into work/
directory, which is mounted in the chroot, and execute that. This way
there is no business logic in runroot (except for finding lorax
templates).
The main advantage of this approach is that we don't need to pull any
extra dependencies into buildroot.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
It will take RPM repo from a variant in this compose and a Dockerfile
from configured git and use it to build an image.
The build images are uploaded to some a Docker registry by OSBS and are
not directly part of compose (because there is no export function).
There is a new metadata file `osbs.json` that has some information that
can be used to find the image.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This should fix the issue with only printing information about automatic
toggling of `supported` flag to standard output and not to a file.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
If release_version does not have a . in it the current logic gives us
and empty result. in those cases, such as 23 or Rawhide use the value
of release_version as is.
Signed-off-by: Dennis Gilmore <dennis@ausil.us>
The performed checks:
* If format is ISO, the file must have correct magic string
* If it's bootable, there must be MBR or GPT
When a check fails on any failable deliverable, it will be logged and
the file removed from metadata (it will still remain on the disk). This
required a change to write the images.json file later (after test
phase).
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Instead of running a long command line in the runroot (or locally), move
all that work into a separate script that will be installed. This means
chroot will need to install pungi.
Everything should work as it did before. The only exception to this is
that there is logic to find lorax templates instead of harcoding the
location. This is done using a separate script.
Related: #230Fixes: #231
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Lubomír Sedlář
Daniel Mach
Qixiang Wan
Dennis Gilmore
Chenxiong Qi
Pat Riehecky
Dennis Gilmore