Behavior before this change: debuginfo was added based on source RPMs.
Pungi would get all debuginfo for all architectures that include at
least one binary package. This had a consequence that if foo-x.x86_64
and foo-x.i686 from the same built were included, foo-y-debuginfo.i686
would be included despite foo-y only being present for x86_64.
The patch changes this to work on binary package level: for each
included package `x`, check if there is `x-debuginfo` or
`x-debugsource`, and include them. Packages added in this way have to go
through one iteration of the solver, to account for cases such as
`x-libs-debuginfo` depending on `x-debuginfo` (with only `x` starting
this chain).
To make it slightly faster, the invocation of fus is changed to only
process newly added package in each iteration. It should have no effect
on the results, and subsequent iterations are much faster if they don't
process the same stuff again and again.
JIRA: COMPOSE-3247
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The file in old compose does not change, there is no need to load it
again for each tag.
One consequence of this change is that the same cache will be used by
all package sets. They add stuff to the cache as they use it. However
that should not be a problem for the same reason it's okay to use the
cache in the first place. If two packages have the same path, they are
actually the same file and it's okay to reuse the data.
JIRA: COMPOSE-3374
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Also remove the useless listTaggedRPMs call which has been used *only*
to catch the very rare error which happened from time to time when
we used PDC in Pungi few years ago. This rare error is not relevant
anymore now.
Signed-off-by: Jan Kaluza <jkaluza@redhat.com>
If the config is loaded from JSON, we will get list instead of tuple.
The validation rule does not really care whether it's a list or tuple,
it only enforces there are two strings. The definition is renamed to be
a bit more descriptive.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
We run a thread for each task, not one per variant. If there are
multiple containers in a single variant, the logs contain confusing
entries about starting the phase multiple times.
2019-02-28 01:58:54 ... [BEGIN] OSBS phase for variant Foo
2019-02-28 01:58:54 ... [BEGIN] OSBS phase for variant Foo
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Translate the using configured patterns, and give OSBS a repo file with
that URL.
JIRA: COMPOSE-3290
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
If a repo or install tree is specified as an absolute path on the local
filesystem, we should either translate it using the configured mappings,
or if no mapping matches, it should be return unchanged. A variant name
can not start with a slash, so attempting that translation does not make
much sense.
JIRA: COMPOSE-3290
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The default is the original behaviour. On F30+ a new option should be
added to config to make it work.
Over time as users move to this option (which requires a new enough
version of lorax), the default should be switched and then the option
removed.
Resolves: https://pagure.io/pungi/issue/1126
Merges: https://pagure.io/pungi/pull-request/1128
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This patch allows the configuration to express maximum expected size for
ISOs created in createiso and extra_isos phases. If the image is larger
than this limit, a warning is emitted in test phase. The compose itself
is not affected in any way.
JIRA: COMPOSE-2824
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This patch does not do any actual pushing. It will only extract data
about push targets from the main configuration and store it together
with exact Koji NVR in a well-defined location, and also send the data
to message bus for another service to handle.
JIRA: COMPOSE-3228
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
For binary packages the filters are handled at the depsolver level.
However sources and debuginfo is added later in the process, so the
filters have to be explicitly applied.
JIRA: COMPOSE-3114
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
If the hybrid solver is used in a situation where there are modules in
lookaside repo, but not in the compose itself, it will fail to detect
any platform. Since we are already opening the module repodata, we can
retrieve platforms from all modules in there as well.
If there are conflicts (e.g. multiple modules depending on different
platforms), an error will be reported.
JIRA: COMPOSE-3277
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
If there are variants that depend on another, they should be processed
in order to make sure packages from the base variant are linked first.
That way the srpm cache is populated and any package in layered variant
but with source in base will have access to correct epoch information.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
If there are multiple matching configuration blocks, we should take the
value that is defined in the last one, but only if it actually is there.
That's how it works for other options.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This is really an oversight. The list of packages from prepopulate list
should be treated the same as if the packagees were coming from comps or
additional packages.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This should tell lorax what arch to use and avoids fragile detection
based on contents of source repo.
It uses the same logic buildinstall phase uses to get the buildarch.
Related: https://pagure.io/teamsilverblue/issue/67
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
It may make sense to break a big compose into smaller chunks that can be
done independently. This script allows describing the smaller parts,
runs them with correct dependencies and arranges the result to look like
a single big compose.
All parts use the same koji event, that is either obtained from Koji, or
from command line argument.
JIRA: COMPOSE-2654
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
We already make this possible for the ostree installer, but it was
missing from the traditional one. The default behaviour is to let lorax
decide, but if user knows better, they can overwrite in configuration.
JIRA: COMPOSE-3188
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
If configuration requests a different ref than what treefile has, a
wrong message can be sent.
If the treefile is in JSON, the local copy will be updated in-place and
it works. However with YAML the updated version is still written as JSON
and thus we are still sending the original value.
Fixes: https://pagure.io/pungi/issue/1092
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Instead of multiple places handling the same thing duplicating the
logic, it's better to do it once upfront. This allows easy caching of
the results.
Additional advantage of this approach is that the config dump will
include resolved URLs. The original reference will still be available in
the copy of the original config.
JIRA: COMPOSE-3065
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This should be on top level of the ISO, and list files added
specifically to the ISO. If there's anything inherited from one some
variant, the files will be listed in metadata in the variant directory.
JIRA: COMPOSE-3069
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
They are not always wanted, so let's not include them by default.
There's a new option to include the same files that extra files phases
uses, or alternatively they can be configured specifically and put into
the variant subdirectory.
JIRA: COMPOSE-3084
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The environment in comps for a variant can refer to groups in parent
variant (either for addons, or because of other configuration). We
should not remove the groups in this case.
This requires changes in two places:
* teaching `comps_filter` about groups that should not be removed
* fixing writing comps so that it does not actually change the data as
well
JIRA: COMPOSE-2612
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The initial implementation is very coarse. It enables it for all
variants and all modules. That is not always wanted.
With this patch, the config file has to explicitly list the devel
modules for each variant that should have it. The variant must be
configured also to include the non-devel module (but the module may be
in lookaside so it won't be included).
We now include module metadata in the internal lookaside repo, so that
this whole thing works if one variant is built on top of another.
JIRA: COMPOSE-3034
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
When the configuration lists `*` in `additional_packages`, it has a
special meaning. If it's passed to fus directly, it will use it to match
all modules and RPMs that are not masked by a package available in some
default stream. Neither is good. We don't want it to match modules, and
we want even the masked packages.
The fix is to expand the wildcard to a list of NVRs and give that to
fus. It should include the package even if it is masked.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
There is no repoclosure that correctly understands modules. The best
thing we can offer is the errors reported by the depsolver.
JIRA: COMPOSE-2321
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
If a multilib package fails to be added (broken dependencies, or it
doesn't exist at all), we want to track it and eventually stop the
iterations.
Merges: https://pagure.io/pungi/pull-request/1071
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Stream can contain dash sign and when MBS imports such NSVC to Koji, the
dash is replaced with underscore. The current Pungi code does not
respect that and tries to use the stream from Koji directly, which
results in wrong stream being using in some Pungi internal data.
In this PR, the NSVC is taken from module metadata section of CG Koji
build, which contains real stream including the dashes.
Merges: https://pagure.io/pungi/pull-request/1072
Signed-off-by: Jan Kaluza <jkaluza@redhat.com>
Without this we don't have artifacts from all modules when the first
modular variant is solved. That makes some modular packages appear as
bare.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
If there are two variants with different module sets, the missing
modulemd from variant B causeing depsolving in variant A to consider the
packages as non-modular. That is wrong.
Related: https://bugzilla.redhat.com/show_bug.cgi?id=1640125
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Instead of having one giant command line, write the long list into a
file and pass that to the solver.
The items on the input list are sorted for easy processing.
JIRA: COMPOSE-3012
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
We can't drop the whole package set once the first solver iteration
finishes, because it runs for each arch separately and we need the data
for each of them. We can however delete the arch specific portion.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
If the file is generated, Pungi will modify it at the end of
buildinstall phase. We need to point ISO creation to the modified file,
otherwise the checksum in .treeinfo will be incorrect.
It's sufficient to just update the graft point to correct file, copying
is not needed.
JIRA: COMPOSE-2976
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The function loads existing treeinfo, removes reference to boot.iso and
adds [media] section. This is the basic tweak that should happen for all
ISOs. Additional changes depend on the actual content.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
If we want to include the -devel modules, the original modules should be
present for the solver. However if we put them in both local and
lookaside repos, fus will get confused. Let's not include modules that
are in lookaside in the module repo created for the solving job.
Even if the modular packages are present in the local repo, they are
identical to the ones in lookaside, and so they should not make it into
the result anyway.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
