- We should add the images to the compose if they will be used only as netinstall image.
E.g. *-boot.iso.
- And we shouldn't add if the images will be modified in phase `extra_isos`.
E.g. *-minimal.iso
Change-Id: I9095cfd87414ecca46b1213553589731c82dd2e2
The change allows for setting the parameters as described below to Lorax.
Lorax, a program called during the buildInstall phase, creates the SquashFS
during the buildInstall phase.
The Squash filesystem is present both on the DVD and the BOOT.ISO.
squashfs_only --- (str) passes --squashfs-only option.
configuration_file --- (str or scm_dict) passes -c option to Lorax.
The final goal of this change is to allow for optimization of
the installation medium size.
This pull request is related to the Fedora change proposal, which is available
at this location:
https://fedoraproject.org/wiki/Category:Changes/OptimizeSquashFS
See the change proposal for more information about the benefits of higher
compression ratio.
Jira: RHELCMP-693
Signed-off-by: Bohdan Khomutskyi <bkhomuts@redhat.com>
Logs of DepsolveError will be printed in the main log.
Fixes: https://pagure.io/pungi/issue/1399
JIRA: RHELCMP-955
Signed-off-by: Haibo Lin <hlin@redhat.com>
New `buildinstall.metadata` file is created once the buildinstall
phase is done. This file contains:
- list of lorax command line arguments.
- list of RPMs installed in the buildinstall buildroot.
- list of RPMs installed in the resulting boot.iso.
This file is checked in the next compose run to find out if
the result of buildinstall phase from the previous compose
can be reused. Following is checked:
- lorax commandline arguments are the same (except of expected
differences).
- The NVRAs of RPMs in the runroot_tag are the same as the ones
installed in the old buildinstall buildroot.
- The NVRAs of RPMs installed in the boot.iso are the same as
the ones in package sets in the current compose.
By its implementation, this reuse strategy is used only if
pungi_buildinstall Koji plugin is used.
Signed-off-by: Jan Kaluza <jkaluza@redhat.com>
Add tests for buildinstall reuse and buildinstall_allow_reuse option.
Signed-off-by: Jan Kaluza <jkaluza@redhat.com>
If Koji pungi-buildinstall is used, then the buildinstall results are
stored in the `output_dir` dir, but in "results" and "logs" subdirectories.
We need to move them to final_output_dir.
Signed-off-by: Jan Kaluza <jkaluza@redhat.com>
We would like to start generating the buildinstall phase using the safer
Koji Pungi Buildinstall plugin and stop the direct use of Runroot plugin.
The plugin so far exists only as PR for Koji:
https://pagure.io/koji/pull-request/1939
This commit adds support for this plugin when `lorax_use_koji_plugin`
is set to `True`.
Signed-off-by: Jan Kaluza <jkaluza@redhat.com>
It was needed to provide assertItemsEqual method. Starting with Python
3.2, there's assertCountEqual that does the same thing. Six provides a
helper that will dispatch to the existing method. With this change,
unittest 2 is only needed on Python 2.6 to backport the method.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Simply use all existing package set repos as input for the runroot
task. The command line gets a bit long, but the actual behaviour should
remain the same.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This also cleans up the runroot method detection code to not rely on the
now removed option.
JIRA: COMPOSE-2634
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
It's created in runroot, the owner and permissions should be updated so
that anyone can read it and user running compose can delete the files.
JIRA: COMPOSE-3545
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The directory with logs should have updated owner and permission as
well as the actual output. This patch lays foundation for that by
allowing multiple paths to be specified.
JIRA: COMPOSE-3545
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Instead of running the copy from the main script explicitly, make it
part of the thread.
This should make things very slightly faster, and the code is much
simpler.
Fixes: https://pagure.io/pungi/issue/959
JIRA: COMPOSE-2604
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Sometimes the release version can be more specific than what should be
exposed to users of the boot iso.
JIRA: COMPOSE-3295
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This adds new `Runroot` class and new `runroot_method` option which makes
it possible to choose between two currently available runroot methods:
- Local
- Koji
The main goal of this commit is to make it possible to add new runroot
methods in the future and this is the first step in that direction.
Signed-off-by: Jan Kaluza <jkaluza@redhat.com>
If there are multiple matching configuration blocks, we should take the
value that is defined in the last one, but only if it actually is there.
That's how it works for other options.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
We already make this possible for the ostree installer, but it was
missing from the traditional one. The default behaviour is to let lorax
decide, but if user knows better, they can overwrite in configuration.
JIRA: COMPOSE-3188
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This was not configurable for users, and the default was always used,
which meant no escaping. Might as well just remove the dead code.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This makes it possible to run a compose as non-root user, plus removes
the need for workarounds to publish the results directly.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
It does not abort the compose, but it's still an error. It should be
marked as such in the log. This will allow easier searching for the
failures.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
If the phase is skipped, it could mean that we are doing a debug run and
we don't want to mess up the .treefile by missing arch specific images.
The other alternative is that the phase was really skipped, in which
case there will be no files generated and we already handle that fine.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The comps could potentially be different in different variants, so
instead we can create the comps repo for every variant separately and
use two repos instead of one (packages in one repository, comps in
another one).
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
A new configuration option is added that allows users to point lorax to
extra repositories. This can be handy if some tools to create the
bootable image are not part of the product itself.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
JIRA: COMPOSE-2253
A new `buildinstall_topdir` option allows using buildinstall even when
the compose is created on a different volume that Koji is using.
The files are created in this external directory and then copies into
the usual location.
Merges: https://pagure.io/pungi/pull-request/807
Signed-off-by: Jan Kaluza <jkaluza@redhat.com>
This should make all tests pass on both Python 2 and Python 3.
Unittest2 is required on Py 2.6 and Py 3.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This would be useful for modularity. The templates can be added now and
variables set via the existing `lorax_option`.
It's not possible to use custom templates not shipped with lorax, as
passing the path to a random directory is a little bit more tricky.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Even a failed lorax task can leave behind some in-progress images. Pungi
needs to copy the files into compose/ subdirectory only if the task
finished successfully.
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1485021
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
For different cases where runroot is used it's now possible to set
custom weight. The usecase for this is to avoid one builder taking too
many tasks. Especially buildinstall is quite resource intensive, so one
builder taking multiple tasks at the same time leads to very slow
compose time.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Add compose.mkdtemp which creates and returns a unique temporary
directory under <compose_topdir>/work/{global,<arch>}/tmp[-<variant>]/
Change tempfile.mkdtemp in code to compose.mkdtemp, so temporary
dirs are created under the compose's workdir, this makes it more
easier to maintain the temporary dirs/files especially when compose
fails with amount of temporary files left there.
Signed-off-by: Qixiang Wan <qwan@redhat.com>
Phases createiso, liveimages, image_build, ostree_installer and osbs are
done in parallel, logs from these phases are mixed and and it's not
obvious which log message belongs to which phase. This change adds phase
name in log message for these phases.
The new mixin 'PhaseLoggerMixin' is added to extend a Pungi phase with a
logging logger which copy handlers from compose's logger but with
formatter changed.
Fixes: #58
Signed-off-by: Qixiang Wan <qwan@redhat.com>
