Since multiple images are created in a single Koji task, the path to log
file contains a list of arches. These used to be separated with comma.
For consistency with live-media they are now separated by dashes.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
KojiWrapper returns the task id as an integer already (if at all). There
is no need to parse it again.
Pagure: #148
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This patch updates tests so that they pass, and fixes a couple places in
image build that did not work correctly with the nested configuration.
The documentation is reformatted so that it horizontal scrolling is less
likely.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This patch fixes how logs are stored if lorax is used as buildinstall
method. The logs for each variant are in a separate file now. If failure
is allowed, the global log will now show why it failed.
A couple tests are added as well.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This phase builds live media in Koji using the Live Media Creator. It
runs in parallel with current live images, create ISO and image build
phases.
The documentation is updated to explain how to configure this.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The methods mentioning image build are generic and can work for other
task types.
get_image_build_paths -> get_image_paths
run_create_image_cmd -> run_blocking_cmd
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
When the release is explicitly set to None, generate a value from date
and respin. The documentation is updated to explain how it works.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
There is now a single option `multilib`, that maps variants and arches
to multilib methods. This replaces old `multilib_methods` option.
Multilib arches are implicitly deduced instead of using the
`multilib_arches` option.
The test compose is updated to only enable multilib on Server and its
addons.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This patch removes some duplicated variables that get passed on to the
build thread. It also moves creation of the command for generating image
manifest closer to where it is used. Finally it adds tests for the
thread.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This patch adds option for adding repositories from other variants to
the koji task for building images.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Fedora variants needs both general fedora-release and
fedora-release-$variant packages installed. This patch disables the code
that would throw fedora-release away (assuming correct config is set).
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The configuration can now specify image-build as a deliverable that can
fail but not abort the whole compose.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
* Move getting arches to separate method.
* Modify git url only if there is going to be a build. This is not very
likely to happen, but could save a bit of time if it really does
happen.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The config can now additionally specify other variants whose repos will
be passed on to koji. The previous way of specifying extra repos is
still available, as is the automatic adding of repo for current variant.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Given a list of arches, koji can build multiple images in one go
(automatically starting children tasks for each one).
This causes a bunch of changes:
* The configuration no longer allows changing config based on
architecture, only variants are allowed. It is however possible to
filter which arches are used for the building in the variant.
* The configuration files for koji image-build are stored in
work/image-build/$variant (not split based on arch).
This patch also changes the option name that is passed to koji
image-build: the repos should be specified under key `repo` (without the
trailing slash).
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The code modifies the config in place, so it only works in the first
iteration. The fix is to create a copy which can be safely modified and
next iteration will still see the original data.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
First, this fixes the crash when volume id requires variant uid, but it
is not specified. This happened in buildinstall phase.
When lorax is used, it is run once for each variant, so we can actually
specify the variant and get the correct variant.
When using buildinstall, no volume id will be generated and pungi will
possibly crash later on.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
There is a new configuration option that allows listing what can fail
without aborting the whole compose. So far, only buildinstall, createiso
and liveimages phases react to this option.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The computation of image name has been moved to a separate function.
This allowed simplification in how work dir for isos is computed, but
the result is not changed.
The live image phase has some special casing for names of RPM wrapped
ISOs. This is moved to the actual phase. Since this is (and has been)
undocumented, there should not be many users of this special case.
The documentation is updated to describe how image names and volume ids
are determined and how the process can be customized.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
When the image build configuration specifies kickstart URL as a HEAD of
a git repo, pungi now figures out what the actual hash of that commit is
and uses that hash instead. This might make logs clearer and should
prevent potential problems if someone pushes to that repo during
composing.
Documentation is updated to mention this.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The config file can now specify options for lorax per variant and arch.
This is needed for Fedora to set x86_64 images as bootable on mac.
The old config option `buildinstall_upgrade_image` was deprecated, as
the same can be specified via new `lorax_options`.
Documentation and tests are updated.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Lorax fails when run on an existing non-empty directory. This patch runs
it in separate subdirectiories base on variant. Running with
buildinstall should not be changed at all.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The buildinstall phase now starts lorax for each variant separately.
Running with buildinstall should not be affected in any way.
Only variants of type=variant are considered. The side-effect of this is
that if an architecture is only used by variants of other types, lorax
will not be called at all.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This patch modifies how checksums are stored - it uses BSD-style
checksums.
The filename with the checksum can now be customized depending on actual
compose run and metadata. This required adding another option to the
checksumming phase. Documentation is updated and includes example for
creating names used in Fedora.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
On case-insensitive filesystems it is not such a good idea to have
directories that only differ in case. Packages should be always split
into lowercased directories.
The test data is modified to include some packages starting with
uppercase letters. The example in code can be verified by running
`nosetests --with-doctest`.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
getting the commands together to run the iso creation process was
incorrectly moved when jigdo creation was made optional, patch fixes
https://pagure.io/pungi/issue/77
Signed-off-by: Dennis Gilmore <dennis@ausil.us>
a workaround has been put in place on os's that need it. dnf errors
when a package is listed that is not available. breaking rawhide
composes.
Signed-off-by: Dennis Gilmore <dennis@ausil.us>
When phase starts, a message is sent with list of images that are going
to be built. As each images is finished (or fails), another message
announces that status.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
With this patch, Pungi can invoke an arbitrary command on various
moments of the compose process. The invoked command can the decide on
what message to send (and using what messaging system).
The actual command is specified in the config file.
There is a script provided that sends the messages via fedmsg.
The documentation is updated to have details about the new config option
as well as the interface for the messaging script.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The phase goes through all images declared in image manifest, computes
their checksums, stores them in appropriate files and updates the
manifest so that it includes the actual checksums.
The documentation contains details about new configuration options.
The test suite now needs Python's mock package.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
These phases were computing checksums for images:
* buildinstall
* createiso
* image_build
* live_images
* product_img
In each phase the checksummed thing would ultimately end-up in image
manifest.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The checksums are still generated in the ImageBuild and CreatISO phases,
but collecting of them into single file is moved from pungi-koji script
into a separate phase.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Add add_template, add_template_var, add_arch_template, and
add_arch_template_var to the call for lorax.get_lorax_cmd for the Atomic
ISO composes.
Remove duplicate if statement for add_template_var in lorax wrapper
CHANGE: Rename product_* config options to release_* for consistency with productmd.
ACTION: Rename product_name, product_short, product_version, product_is_layered to release_* in config files.
Rename //variant/product to //variant/release in variants XML.
CHANGE: pkgset_koji_url and pkgset_koji_path_prefix config options replaced with koji_profile.
ACTION: Add 'koji_profile = "<profile_name>"' (use "koji" for Fedora) to config files.
You can safely remove and pkgset_koji_url and pkgset_koji_path_prefix from config files.
These tests frequently report false-positives,
because package set may contain broken dependencies,
while compose doesn't.
Removing the tests will also reduce compose time a bit.
CHANGE: createrepo_c is config option now defaults to True.
ACTION: You can safely remove 'createrepo_c = True' from config files.
Set 'createrepo_c = False' if you need legacy createrepo.
CHANGE: createrepo_checksum config option is now mandatory.
ACTION: Add 'createrepo_checksum = "sha256"' (or "sha") to config files.
