Leaving the field 'repo' out for the 'file' backend makes the compose fail.
[ERROR ] Compose run failed: 'repo'
Signed-off-by: Juliana Rodrigueiro <juliana.rodrigueiro@intra2net.com>
A lorax template used for the ostree-installer might need an additional
package dependency (e.g., flatpak to embed a flatpak repository) - add
a config key 'extra_runroot_pkgs' to the ostree installer configuration
to allow supplementing the set of packages installed into the runroot.
Signed-off-by: Owen W. Taylor <otaylor@fishsoup.net>
Add a configuration option to enable skipping some modules found in the
configured tag.
Fixes: https://pagure.io/pungi/issue/1260
JIRA: COMPOSE-3794
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Sometimes it's practical not just warn when ISO is larger than expected,
but to also abort the compose.
JIRA: COMPOSE-3658
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
- Pass the runroot_tag to init command in OpenSSH Runroot method.
This is needed for the init command as a source for initial packages
for the buildroot.
- Rename the "runroot_ssh_init_command" to "runroot_ssh_init_template"
to make it consistent with the rest of "runroot_ssh_*" options.
- Add missing "runroot_ssh_*" options to checks.py.
- Use chmod/chown to `output_dir` in OpenSSH Runroot method the same way
as it is used in Koji runroot method to make the runroot output readable
for Pungi user.
Signed-off-by: Jan Kaluza <jkaluza@redhat.com>
This adds few new config options which are well described in the
configuration documentation. Please refer to it for more information.
Merges: https://pagure.io/pungi/pull-request/1170
Signed-off-by: Jan Kaluza <jkaluza@redhat.com>
Embedding the registry configuration into OSBS config itself is
simple, but makes it impossible to reuse the same configuration for
multiple different composes.
A nice example is a nightly pushing images to a testing registry, and
production compose building the same images but pushing to staging
location. The original design requires duplication of all the
configuration just because registries are different.
With this option, the push information is stored in a separate option as
a mapping from NVR patterns to arbitrary data. The patterns are used to
match finished builds to registry.
The old configuration is marked as deprecated in code and will
eventually be removed. The deprecation handling in config validation
does not allow emitting warnings for nested values.
JIRA: COMPOSE-3394
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Sometimes the release version can be more specific than what should be
exposed to users of the boot iso.
JIRA: COMPOSE-3295
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This adds new `Runroot` class and new `runroot_method` option which makes
it possible to choose between two currently available runroot methods:
- Local
- Koji
The main goal of this commit is to make it possible to add new runroot
methods in the future and this is the first step in that direction.
Signed-off-by: Jan Kaluza <jkaluza@redhat.com>
Run arbitrary commands before and after the compose.
The example config is updated to generate latest symlink with a
post-compose script. The pre compose script runs always, post compose
runs only if the compose is not doomed.
JIRA: COMPOSE-3288
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
If the configuration sets keytab path and principal, run kinit with
custom cache file, and delete the file at the end of the run.
JIRA: COMPOSE-3288
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
If a repo or install tree is specified as an absolute path on the local
filesystem, we should either translate it using the configured mappings,
or if no mapping matches, it should be return unchanged. A variant name
can not start with a slash, so attempting that translation does not make
much sense.
JIRA: COMPOSE-3290
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The default is the original behaviour. On F30+ a new option should be
added to config to make it work.
Over time as users move to this option (which requires a new enough
version of lorax), the default should be switched and then the option
removed.
Resolves: https://pagure.io/pungi/issue/1126
Merges: https://pagure.io/pungi/pull-request/1128
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This patch allows the configuration to express maximum expected size for
ISOs created in createiso and extra_isos phases. If the image is larger
than this limit, a warning is emitted in test phase. The compose itself
is not affected in any way.
JIRA: COMPOSE-2824
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This patch does not do any actual pushing. It will only extract data
about push targets from the main configuration and store it together
with exact Koji NVR in a well-defined location, and also send the data
to message bus for another service to handle.
JIRA: COMPOSE-3228
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
It may make sense to break a big compose into smaller chunks that can be
done independently. This script allows describing the smaller parts,
runs them with correct dependencies and arranges the result to look like
a single big compose.
All parts use the same koji event, that is either obtained from Koji, or
from command line argument.
JIRA: COMPOSE-2654
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
We already make this possible for the ostree installer, but it was
missing from the traditional one. The default behaviour is to let lorax
decide, but if user knows better, they can overwrite in configuration.
JIRA: COMPOSE-3188
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Add more details to the documentation for the product_id_allow_missing
setting:
- Pungi expects a product cert for each arch in each variant.
- Pungi will exit with an error by default if a variant+arch's cert is
missing.
- Pungi will log a warning if product_id_allow_missing is True.
Merges: https://pagure.io/pungi/pull-request/1102
Signed-off-by: Ken Dreyer <kdreyer@redhat.com>
Document the "productid" files that Pungi creates when the user
configures the "product_id" setting. Describe where to find the
"productid" files, and how they relate to subscription-manager.
Signed-off-by: Ken Dreyer <kdreyer@redhat.com>
They are not always wanted, so let's not include them by default.
There's a new option to include the same files that extra files phases
uses, or alternatively they can be configured specifically and put into
the variant subdirectory.
JIRA: COMPOSE-3084
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Up to now it was possible to change the pattern for all images, but
there are use-cases where different variants might want different names.
For example there could be one main variant that should only have
product name in the ISO filename, but addons should still be marked with
variant name.
JIRA: COMPOSE-3041
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This PR adds new pkgset_koji_builds configuration option.
This option allows setting list of extra Koji build NVRs which will be
included in a compose. This is useful in two cases:
a) It allows generating standard composes with few packages update to
certain version to test how the compose behaves when the package is
updated for real.
b) It allows generating compose consisting only from particular builds
when pkgset_koji_tag = '' or None. This is useful when one want to
regenerate the compose with packages which are not tagged in single Koji
tag. This is very useful for ODCS when reproducing old composes.
Merges: https://pagure.io/pungi/pull-request/1049
Signed-off-by: Jan Kaluza <jkaluza@redhat.com>
This patch changes the behaviour when both module tag and NSV?C? is
specified. The NSVC are used as a whitelist and only matching modules
will be included in the compose.
Additionally this patch adds filtering based on inheritance: when
finding the latest module for each N:S combination, only the top tag in
which the module is tagged is used. Even if a newer build is available
somewhere deeper in the inheritance, it's not going to be used.
Example inheritance and tagged modules
f29-compose (foo:1:2018:cafe)
└─ f29-candidate (foo:1:2019:cafe)
The compose will use 2018 version, because it's in the topmost tag.
JIRA: COMPOSE-2685
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
If the same tag is queried with the same event, Pungi can cache the
response and call the API again. Particularly for small composes this
can save up significant amount of time.
Merges: https://pagure.io/pungi/pull-request/1022
Signed-off-by: Jan Kaluza <jkaluza@redhat.com>
This is used in multiple places, but not defined anywhere.
Fixes: https://pagure.io/pungi/issue/1028
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>