The change allows for setting the parameters as described below to Lorax.
Lorax, a program called during the buildInstall phase, creates the SquashFS
during the buildInstall phase.
The Squash filesystem is present both on the DVD and the BOOT.ISO.
squashfs_only --- (str) passes --squashfs-only option.
configuration_file --- (str or scm_dict) passes -c option to Lorax.
The final goal of this change is to allow for optimization of
the installation medium size.
This pull request is related to the Fedora change proposal, which is available
at this location:
https://fedoraproject.org/wiki/Category:Changes/OptimizeSquashFS
See the change proposal for more information about the benefits of higher
compression ratio.
Jira: RHELCMP-693
Signed-off-by: Bohdan Khomutskyi <bkhomuts@redhat.com>
Nose has been in maintenance mode for the past several years
and pytest is a good replacement.
Other changes:
- Replace deprecated assertRegexpMatches with assertRegex
- Replace deprecated assertRaisesRegexp with assertRaisesRegex
- Replace deprecated SafeConfigParser with ConfigParser
- Force reinstall pytest and mock in tox virtualenv. This is because
the globally installed packages may not work as expected(occured in
jenkins job).
JIRA: RHELCMP-1619
Signed-off-by: Haibo Lin <hlin@redhat.com>
This patch updates the documentation to match the actual behavior, and
adds a configuration option to remove the leading prefix.
The extra wildcard is causing problems when there are two variants in
the compose and one UID is a suffix of the other (e.g. DevTools and
Tools), since multiple files will match the shorter name and an error
will be reported.
JIRA: RHELCMP-1086
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This is a workaround for modularity design issues and DNF bugs. If there
were gaps in contexts, DNF has trouble handling the upgrades. Thus we
may need to add module metadata for older versions of previously
released module streams and add the missing contexts.
JIRA: RHELCMP-982
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This commits changes `ostree` and `ostree_installer` phases
so they can run with Koji Pungi plugin instead of the plain runroot.
It is similar to `buildinstall` phase running with Koji plugin.
Signed-off-by: Jan Kaluza <jkaluza@redhat.com>
Explain how Pungi operates on the sigkeys list, and what happens when
there is only one item in the list.
Signed-off-by: Ken Dreyer <kdreyer@redhat.com>
New `buildinstall.metadata` file is created once the buildinstall
phase is done. This file contains:
- list of lorax command line arguments.
- list of RPMs installed in the buildinstall buildroot.
- list of RPMs installed in the resulting boot.iso.
This file is checked in the next compose run to find out if
the result of buildinstall phase from the previous compose
can be reused. Following is checked:
- lorax commandline arguments are the same (except of expected
differences).
- The NVRAs of RPMs in the runroot_tag are the same as the ones
installed in the old buildinstall buildroot.
- The NVRAs of RPMs installed in the boot.iso are the same as
the ones in package sets in the current compose.
By its implementation, this reuse strategy is used only if
pungi_buildinstall Koji plugin is used.
Signed-off-by: Jan Kaluza <jkaluza@redhat.com>
Add tests for buildinstall reuse and buildinstall_allow_reuse option.
Signed-off-by: Jan Kaluza <jkaluza@redhat.com>
Move repoclosure out from test phase into its own phase and
run parallel with image building phases(osbs, imagebuild, ...)
to speed things up.
JIRA: RHELCMP-8
Signed-off-by: Haibo Lin <hlin@redhat.com>
- Get also requires/provides of RPMs in package set.
- Store the results of gather phase as pickle file.
- Reuse old gather phase results in case Pungi configuration
did not change, the "names" of RPMs in global package set
did not change and their requires/provides did not change.
- Add `gather_allow_reuse` option to enable this feature.
Signed-off-by: Jan Kaluza <jkaluza@redhat.com>
Add gather_allow_reuse, add more tests and better handling of gather_lookaside_repos.
It seems the other phases executed in Weaver phase does not need
extra_files output, so it can be run in parallel to them.
Signed-off-by: Jan Kaluza <jkaluza@redhat.com>
We would like to start generating the buildinstall phase using the safer
Koji Pungi Buildinstall plugin and stop the direct use of Runroot plugin.
The plugin so far exists only as PR for Koji:
https://pagure.io/koji/pull-request/1939
This commit adds support for this plugin when `lorax_use_koji_plugin`
is set to `True`.
Signed-off-by: Jan Kaluza <jkaluza@redhat.com>
There was an attempt to achieve this by customizing --version and
--release arguments for Lorax, but Pungi does not take the [general] and
[release] sections from its .treeinfo. Instead it was always using
release version.
The value from this new option will be put into .treeinfo and used for
--version and --release arguments in Lorax (unless explicitly defined in
lorax_options to another value).
JIRA: COMPOSE-4029
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Leaving the field 'repo' out for the 'file' backend makes the compose fail.
[ERROR ] Compose run failed: 'repo'
Signed-off-by: Juliana Rodrigueiro <juliana.rodrigueiro@intra2net.com>
A lorax template used for the ostree-installer might need an additional
package dependency (e.g., flatpak to embed a flatpak repository) - add
a config key 'extra_runroot_pkgs' to the ostree installer configuration
to allow supplementing the set of packages installed into the runroot.
Signed-off-by: Owen W. Taylor <otaylor@fishsoup.net>
Add a configuration option to enable skipping some modules found in the
configured tag.
Fixes: https://pagure.io/pungi/issue/1260
JIRA: COMPOSE-3794
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Sometimes it's practical not just warn when ISO is larger than expected,
but to also abort the compose.
JIRA: COMPOSE-3658
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
- Pass the runroot_tag to init command in OpenSSH Runroot method.
This is needed for the init command as a source for initial packages
for the buildroot.
- Rename the "runroot_ssh_init_command" to "runroot_ssh_init_template"
to make it consistent with the rest of "runroot_ssh_*" options.
- Add missing "runroot_ssh_*" options to checks.py.
- Use chmod/chown to `output_dir` in OpenSSH Runroot method the same way
as it is used in Koji runroot method to make the runroot output readable
for Pungi user.
Signed-off-by: Jan Kaluza <jkaluza@redhat.com>
This adds few new config options which are well described in the
configuration documentation. Please refer to it for more information.
Merges: https://pagure.io/pungi/pull-request/1170
Signed-off-by: Jan Kaluza <jkaluza@redhat.com>
Embedding the registry configuration into OSBS config itself is
simple, but makes it impossible to reuse the same configuration for
multiple different composes.
A nice example is a nightly pushing images to a testing registry, and
production compose building the same images but pushing to staging
location. The original design requires duplication of all the
configuration just because registries are different.
With this option, the push information is stored in a separate option as
a mapping from NVR patterns to arbitrary data. The patterns are used to
match finished builds to registry.
The old configuration is marked as deprecated in code and will
eventually be removed. The deprecation handling in config validation
does not allow emitting warnings for nested values.
JIRA: COMPOSE-3394
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Sometimes the release version can be more specific than what should be
exposed to users of the boot iso.
JIRA: COMPOSE-3295
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This adds new `Runroot` class and new `runroot_method` option which makes
it possible to choose between two currently available runroot methods:
- Local
- Koji
The main goal of this commit is to make it possible to add new runroot
methods in the future and this is the first step in that direction.
Signed-off-by: Jan Kaluza <jkaluza@redhat.com>
Run arbitrary commands before and after the compose.
The example config is updated to generate latest symlink with a
post-compose script. The pre compose script runs always, post compose
runs only if the compose is not doomed.
JIRA: COMPOSE-3288
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
If the configuration sets keytab path and principal, run kinit with
custom cache file, and delete the file at the end of the run.
JIRA: COMPOSE-3288
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
If a repo or install tree is specified as an absolute path on the local
filesystem, we should either translate it using the configured mappings,
or if no mapping matches, it should be return unchanged. A variant name
can not start with a slash, so attempting that translation does not make
much sense.
JIRA: COMPOSE-3290
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
The default is the original behaviour. On F30+ a new option should be
added to config to make it work.
Over time as users move to this option (which requires a new enough
version of lorax), the default should be switched and then the option
removed.
Resolves: https://pagure.io/pungi/issue/1126
Merges: https://pagure.io/pungi/pull-request/1128
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This patch allows the configuration to express maximum expected size for
ISOs created in createiso and extra_isos phases. If the image is larger
than this limit, a warning is emitted in test phase. The compose itself
is not affected in any way.
JIRA: COMPOSE-2824
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This patch does not do any actual pushing. It will only extract data
about push targets from the main configuration and store it together
with exact Koji NVR in a well-defined location, and also send the data
to message bus for another service to handle.
JIRA: COMPOSE-3228
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
It may make sense to break a big compose into smaller chunks that can be
done independently. This script allows describing the smaller parts,
runs them with correct dependencies and arranges the result to look like
a single big compose.
All parts use the same koji event, that is either obtained from Koji, or
from command line argument.
JIRA: COMPOSE-2654
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
We already make this possible for the ostree installer, but it was
missing from the traditional one. The default behaviour is to let lorax
decide, but if user knows better, they can overwrite in configuration.
JIRA: COMPOSE-3188
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Add more details to the documentation for the product_id_allow_missing
setting:
- Pungi expects a product cert for each arch in each variant.
- Pungi will exit with an error by default if a variant+arch's cert is
missing.
- Pungi will log a warning if product_id_allow_missing is True.
Merges: https://pagure.io/pungi/pull-request/1102
Signed-off-by: Ken Dreyer <kdreyer@redhat.com>
Document the "productid" files that Pungi creates when the user
configures the "product_id" setting. Describe where to find the
"productid" files, and how they relate to subscription-manager.
Signed-off-by: Ken Dreyer <kdreyer@redhat.com>
They are not always wanted, so let's not include them by default.
There's a new option to include the same files that extra files phases
uses, or alternatively they can be configured specifically and put into
the variant subdirectory.
JIRA: COMPOSE-3084
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
Up to now it was possible to change the pattern for all images, but
there are use-cases where different variants might want different names.
For example there could be one main variant that should only have
product name in the ISO filename, but addons should still be marked with
variant name.
JIRA: COMPOSE-3041
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This PR adds new pkgset_koji_builds configuration option.
This option allows setting list of extra Koji build NVRs which will be
included in a compose. This is useful in two cases:
a) It allows generating standard composes with few packages update to
certain version to test how the compose behaves when the package is
updated for real.
b) It allows generating compose consisting only from particular builds
when pkgset_koji_tag = '' or None. This is useful when one want to
regenerate the compose with packages which are not tagged in single Koji
tag. This is very useful for ODCS when reproducing old composes.
Merges: https://pagure.io/pungi/pull-request/1049
Signed-off-by: Jan Kaluza <jkaluza@redhat.com>
This patch changes the behaviour when both module tag and NSV?C? is
specified. The NSVC are used as a whitelist and only matching modules
will be included in the compose.
Additionally this patch adds filtering based on inheritance: when
finding the latest module for each N:S combination, only the top tag in
which the module is tagged is used. Even if a newer build is available
somewhere deeper in the inheritance, it's not going to be used.
Example inheritance and tagged modules
f29-compose (foo:1:2018:cafe)
└─ f29-candidate (foo:1:2019:cafe)
The compose will use 2018 version, because it's in the topmost tag.
JIRA: COMPOSE-2685
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
If the same tag is queried with the same event, Pungi can cache the
response and call the API again. Particularly for small composes this
can save up significant amount of time.
Merges: https://pagure.io/pungi/pull-request/1022
Signed-off-by: Jan Kaluza <jkaluza@redhat.com>
This is used in multiple places, but not defined anywhere.
Fixes: https://pagure.io/pungi/issue/1028
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This could be used to enable zchunk generation, which can require up to
4 different options. Instead of hardcoding every single one, let's just
allow more direct access to the executed command.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
This patch adds a new gather method called `hybrid`, which uses a `fus`
binary, which must exist somewhere on the `$PATH`. It will call it
multiple times to add multilib packages.
The solver can handle packages, modules and comps groups as input.
However comps groups are never passed in. Pungi will expand it to a list
of packages to avoid issues with comps handling in fus. It ignores
optional packages, and if the group mentions a package that does not
exist, nothing else from the group is included.
Multilib is also handled outside of fus. Pungi will run it, parse the
packages from output, determines multilib packages and adds them as
input. Then it runs the solver again. This is done until nothing new is
added. Usually two passes should be enough.
Source packages and debuginfo are added as a final step. All debuginfo
packages from any included source are added. If the source or debuginfo
package is included in any lookaside repo, it will be skipped.
The tool expects to get a platform stream that should be provided for
modules to depend on. Pungi looks into the modules and gets the platform
from there. If there are more requests, an error is raised.
There is some missing functionality and options that are ignored.
Particularly these are:
* gather_fulltree
* gather_selfhosting
* greedy_method
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
We can specify !VERSION_FROM_VERSION in version field during
image_build to expand it to correct release number without any label
information.
Also implemented !RELEASE_FROM_DATE_RESPIN to provide correct
release number. This helps to keep Atomic Host media files name
produced by image_build during bodhi updates compose run
consistent with nightly run.
Fixes: https://pagure.io/pungi/issue/987
Merges: https://pagure.io/pungi/pull-request/995
Signed-off-by: Sinny Kumari <sinny@redhat.com>
If a file has multiple hard links, genisoimage will put the wrong number
on the ISO. This patch can work around it by copying hard-linked files
into a temporary staging directory.
JIRA: COMPOSE-2610
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
PDC is deprecated in upstream. The usecase for getting list of modules
by NS, NSV or NSVC can however be satisfied by querying modules imported
into Koji.
This makes it possible to deprecate PDC configuration.
Merges: https://pagure.io/pungi/pull-request/985
Signed-off-by: Martin Curlej <mcurlej@redhat.com>
* Koji can now be installed from PyPI and it will also pull in rpm. This
needs rpm-devel install on the system. This means we can get kobo from
PyPI as well.
* Using print function should make it work for python 3 virtualenvs.
* Newer we need kobo in 0.6.0 at least, but newer is fine too.
Signed-off-by: Lubomír Sedlář <lsedlar@redhat.com>
