lorax-composer ============== :Authors: Brian C. Lane ``lorax-composer`` is an API server that allows you to build disk images using `Blueprints`_ to describe the package versions to be installed into the image. It is compatible with the Weldr project's bdcs-api REST protocol. More information on Weldr can be found `on the Weldr blog `_. Behind the scenes it uses `livemedia-creator `_ and `Anaconda `_ to handle the installation and configuration of the images. Important Things To Note ------------------------ * SELinux must be in Permissive mode. Anaconda requires SELinux be in permissive mode for image creation to work correctly. You can either edit the setting in the ``/etc/sysconfig/selinux`` file, or run ``setenforce 0`` before starting lorax-composer. * Some output types require packages from the RHEL 7 Optional repository. See the `Red Hat Enterprise Linux 7 documentation `_ for information on how to enable it. Otherwise you will see image creation fail to depsolve even if the blueprint itself is correct. * All image types lock the root account, except for live-iso. You will need to either use one of the `Customizations`_ methods for setting a ssh key/password, install a package that creates a user, or use something like `cloud-init` to setup access at boot time. Installation ------------ The best way to install ``lorax-composer`` is to use ``sudo dnf install lorax-composer composer-cli``, this will setup the weldr user and install the systemd socket activation service. You will then need to enable it with ``sudo systemctl enable lorax-composer.socket && sudo systemctl start lorax-composer.socket``. This will leave the server off until the first request is made. Systemd will then launch the server and it will remain running until the system is rebooted. This will cause some delay in responding to the first request from the UI or `composer-cli`. .. note:: If you want lorax-composer to respond immediately to the first request you can start and enable `lorax-composer.service` instead of `lorax-composer.socket` Quickstart ---------- 1. Create a ``weldr`` user and group by running ``useradd weldr`` 2. Remove any pre-existing socket directory with ``rm -rf /run/weldr/`` A new directory with correct permissions will be created the first time the server runs. 3. Enable the socket activation with ``systemctl enable lorax-composer.socket && sudo systemctl start lorax-composer.socket``. NOTE: You can also run it directly with ``lorax-composer /path/to/blueprints``. However, ``lorax-composer`` does not react well to being started both on the command line and via socket activation at the same time. It is therefore recommended that you run it directly on the command line only for testing or development purposes. For real use or development of other projects that simply use the API, you should stick to socket activation only. The ``/path/to/blueprints/`` directory is where the blueprints' git repo will be created, and all the blueprints created with the ``/api/v0/blueprints/new`` route will be stored. If there are blueprint ``.toml`` files in the top level of the directory they will be imported into the blueprint git storage when ``lorax-composer`` starts. Logs ---- Logs are stored under ``/var/log/lorax-composer/`` and include all console messages as well as extra debugging info and API requests. Security -------- Some security related issues that you should be aware of before running ``lorax-composer``: * One of the API server threads needs to retain root privileges in order to run Anaconda. * SELinux must be set to Permissive or disabled to allow ``livemedia-creator`` to run Anaconda. * Only allow authorized users access to the ``weldr`` group and socket. Since Anaconda kickstarts are used there is the possibility that a user could inject commands into a blueprint that would result in the kickstart executing arbitrary code on the host. Only authorized users should be allowed to build images using ``lorax-composer``. How it Works ------------ The server runs as root, and as ``weldr``. Communication with it is via a unix domain socket (``/run/weldr/api.socket`` by default). The directory and socket are owned by ``root:weldr`` so that any user in the ``weldr`` group can use the API to control ``lorax-composer``. At startup the server will check for the correct permissions and ownership of a pre-existing directory, or it will create a new one if it doesn't exist. The socket path and group owner's name can be changed from the cmdline by passing it the ``--socket`` and ``--group`` arguments. It will then drop root privileges for the API thread and run as the ``weldr`` user. The queue and compose thread still runs as root because it needs to be able to mount/umount files and run Anaconda. Composing Images ---------------- The `welder-web `_ GUI project can be used to construct blueprints and create composes using a web browser. Or use the command line with `composer-cli `_. Blueprints ---------- Blueprints are simple text files in `TOML `_ format that describe which packages, and what versions, to install into the image. They can also define a limited set of customizations to make to the final image. Example blueprints can be found in the ``lorax-composer`` `test suite `_, with a simple one looking like this:: name = "base" description = "A base system with bash" version = "0.0.1" [[packages]] name = "bash" version = "4.4.*" The ``name`` field is the name of the blueprint. It can contain spaces, but they will be converted to ``-`` when it is written to disk. It should be short and descriptive. ``description`` can be a longer description of the blueprint, it is only used for display purposes. ``version`` is a `semver compatible `_ version number. If a new blueprint is uploaded with the same ``version`` the server will automatically bump the PATCH level of the ``version``. If the ``version`` doesn't match it will be used as is. eg. Uploading a blueprint with ``version`` set to ``0.1.0`` when the existing blueprint ``version`` is ``0.0.1`` will result in the new blueprint being stored as ``version 0.1.0``. [[packages]] and [[modules]] ~~~~~~~~~~~~~~~~~~~~~~~~~~~~ These entries describe the package names and matching version glob to be installed into the image. The names must match the names exactly, and the versions can be an exact match or a filesystem-like glob of the version using ``*`` wildcards and ``?`` character matching. NOTE: As of lorax-composer-29.2-1 the versions are not used for depsolving, that is planned for a future release. And currently there are no differences between ``packages`` and ``modules`` in ``lorax-composer``. [[groups]] ~~~~~~~~~~ These entries describe a group of packages to be installed into the image. Package groups are defined in the repository metadata. Each group has a descriptive name used primarily for display in user interfaces and an ID more commonly used in kickstart files. Here, the ID is the expected way of listing a group. Groups have three different ways of categorizing their packages: mandatory, default, and optional. For purposes of blueprints, mandatory and default packages will be installed. There is no mechanism for selecting optional packages. Customizations ~~~~~~~~~~~~~~ The ``[customizations]`` section can be used to configure the hostname of the final image. eg.:: [customizations] hostname = "baseimage" This is optional and may be left out to use the defaults. [customizations.kernel] *********************** This allows you to append arguments to the bootloader's kernel commandline. This will not have any effect on ``tar`` or ``ext4-filesystem`` images since they do not include a bootloader. For example:: [customizations.kernel] append = "nosmt=force" [[customizations.sshkey]] ************************* Set an existing user's ssh key in the final image:: [[customizations.sshkey]] user = "root" key = "PUBLIC SSH KEY" The key will be added to the user's authorized_keys file. [[customizations.user]] *********************** Add a user to the image, and/or set their ssh key. All fields for this section are optional except for the ``name``, here is a complete example:: [[customizations.user]] name = "admin" description = "Administrator account" password = "$6$CHO2$3rN8eviE2t50lmVyBYihTgVRHcaecmeCk31L..." key = "PUBLIC SSH KEY" home = "/srv/widget/" shell = "/usr/bin/bash" groups = ["widget", "users", "wheel"] uid = 1200 gid = 1200 If the password starts with ``$6$``, ``$5$``, or ``$2b$`` it will be stored as an encrypted password. Otherwise it will be treated as a plain text password. [[customizations.group]] ************************ Add a group to the image. ``name`` is required and ``gid`` is optional:: [[customizations.group]] name = "widget" gid = 1130 [customizations.timezone] ************************* Customizing the timezone and the NTP servers to use for the system:: [customizations.timezone] timezone = "US/Eastern" ntpservers = ["0.north-america.pool.ntp.org", "1.north-america.pool.ntp.org"] The values supported by ``timezone`` can be listed by running ``timedatectl list-timezones``. If no timezone is setup the system will default to using `UTC`. The ntp servers are also optional and will default to using the distribution defaults which are fine for most uses. In some image types there are already NTP servers setup, eg. Google cloud image, and they cannot be overridden because they are required to boot in the selected environment. But the timezone will be updated to the one selected in the blueprint. [customizations.locale] *********************** Customize the locale settings for the system:: [customizations.locale] languages = ["en_US.UTF-8"] keyboard = "us" The values supported by ``languages`` can be listed by running ``localectl list-locales`` from the command line. The values supported by ``keyboard`` can be listed by running ``localectl list-keymaps`` from the command line. Multiple languages can be added. The first one becomes the primary, and the others are added as secondary. One or the other of ``languages`` or ``keyboard`` must be included (or both) in the section. [customizations.firewall] ************************* By default the firewall blocks all access except for services that enable their ports explicitly, like ``sshd``. This command can be used to open other ports or services. Ports are configured using the port:protocol format:: [customizations.firewall] ports = ["22:tcp", "80:tcp", "imap:tcp", "53:tcp", "53:udp"] Numeric ports, or their names from ``/etc/services`` can be used in the ``ports`` enabled/disabled lists. The blueprint settings extend any existing settings in the image templates, so if ``sshd`` is already enabled it will extend the list of ports with the ones listed by the blueprint. If the distribution uses ``firewalld`` you can specify services listed by ``firewall-cmd --get-services`` in a ``customizations.firewall.services`` section:: [customizations.firewall.services] enabled = ["ftp", "ntp", "dhcp"] disabled = ["telnet"] Remember that the ``firewall.services`` are different from the names in ``/etc/services``. Both are optional, if they are not used leave them out or set them to an empty list ``[]``. If you only want the default firewall setup this section can be omitted from the blueprint. NOTE: The ``Google`` and ``OpenStack`` templates explicitly disable the firewall for their environment. This cannot be overridden by the blueprint. [customizations.services] ************************* This section can be used to control which services are enabled at boot time. Some image types already have services enabled or disabled in order for the image to work correctly, and cannot be overridden. eg. ``ami`` requires ``sshd``, ``chronyd``, and ``cloud-init``. Without them the image will not boot. Blueprint services are added to, not replacing, the list already in the templates, if any. The service names are systemd service units. You may specify any systemd unit file accepted by ``systemctl enable`` eg. ``cockpit.socket``:: [customizations.services] enabled = ["sshd", "cockpit.socket", "httpd"] disabled = ["postfix", "telnetd"] Adding Output Types ------------------- ``livemedia-creator`` supports a large number of output types, and only some of these are currently available via ``lorax-composer``. To add a new output type to lorax-composer a kickstart file needs to be added to ``./share/composer/``. The name of the kickstart is what will be used by the ``/compose/types`` route, and the ``compose_type`` field of the POST to start a compose. It also needs to have code added to the :py:func:`pylorax.api.compose.compose_args` function. The ``_MAP`` entry in this function defines what lorax-composer will pass to :py:func:`pylorax.installer.novirt_install` when it runs the compose. When the compose is finished the output files need to be copied out of the build directory (``/var/lib/lorax/composer/results//compose/``), :py:func:`pylorax.api.compose.move_compose_results` handles this for each type. You should move them instead of copying to save space. If the new output type does not have support in livemedia-creator it should be added there first. This will make the output available to the widest number of users. Example: Add partitioned disk support ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Partitioned disk support is something that livemedia-creator already supports via the ``--make-disk`` cmdline argument. To add this to lorax-composer it needs 3 things: * A ``partitioned-disk.ks`` file in ``./share/composer/`` * A new entry in the _MAP in :py:func:`pylorax.api.compose.compose_args` * Add a bit of code to :py:func:`pylorax.api.compose.move_compose_results` to move the disk image from the compose directory to the results directory. The ``partitioned-disk.ks`` is pretty similar to the example minimal kickstart in ``./docs/rhel7-minimal.ks``. You should remove the ``url`` and ``repo`` commands, they will be added by the compose process. Make sure the bootloader packages are included in the ``%packages`` section at the end of the kickstart, and you will want to leave off the ``%end`` so that the compose can append the list of packages from the blueprint. The new ``_MAP`` entry should be a copy of one of the existing entries, but with ``make_disk`` set to ``True``. Make sure that none of the other ``make_*`` options are ``True``. The ``image_name`` is what the name of the final image will be. ``move_compose_results()`` can be as simple as moving the output file into the results directory, or it could do some post-processing on it. The end of the function should always clean up the ``./compose/`` directory, removing any unneeded extra files. This is especially true for the ``live-iso`` since it produces the contents of the iso as well as the boot.iso itself. Package Sources --------------- By default lorax-composer uses the host's configured repositories. It copies the ``*.repo`` files from ``/etc/yum.repos.d/`` into ``/var/lib/lorax/composer/repos.d/`` at startup, these are immutable system repositories and cannot be deleted or changed. If you want to add additional repos you can put them into ``/var/lib/lorax/composer/repos.d/`` or use the ``/api/v0/projects/source/*`` API routes to create them. The new source can be added by doing a POST to the ``/api/v0/projects/source/new`` route using JSON (with `Content-Type` header set to `application/json`) or TOML (with it set to `text/x-toml`). The format of the source looks like this (in TOML):: name = "custom-source-1" url = "https://url/path/to/repository/" type = "yum-baseurl" proxy = "https://proxy-url/" check_ssl = true check_gpg = true gpgkey_urls = ["https://url/path/to/gpg-key"] The ``proxy`` and ``gpgkey_urls`` entries are optional. All of the others are required. The supported types for the urls are: * ``yum-baseurl`` is a URL to a yum repository. * ``yum-mirrorlist`` is a URL for a mirrorlist. * ``yum-metalink`` is a URL for a metalink. If ``check_ssl`` is true the https certificates must be valid. If they are self-signed you can either set this to false, or add your Certificate Authority to the host system. If ``check_gpg`` is true the GPG key must either be installed on the host system, or ``gpgkey_urls`` should point to it. You can edit an existing source (other than system sources), by doing a POST to the ``new`` route with the new version of the source. It will overwrite the previous one. A list of existing sources is available from ``/api/v0/projects/source/list``, and detailed info on a source can be retrieved with the ``/api/v0/projects/source/info/`` route. By default it returns JSON but it can also return TOML if ``?format=toml`` is added to the request. Non-system sources can be deleted by doing a ``DELETE`` request to the ``/api/v0/projects/source/delete/`` route. The documentation for the source API routes can be `found here `_ The configured sources are used for all blueprint depsolve operations, and for composing images. When adding additional sources you must make sure that the packages in the source do not conflict with any other package sources, otherwise depsolving will fail. DVD ISO Package Source ~~~~~~~~~~~~~~~~~~~~~~ In some situations the system may want to *only* use a DVD iso as the package source, not the repos from the network. ``lorax-composer`` and ``anaconda`` understand ``file://`` URLs so you can mount an iso on the host, and replace the system repo files with a configuration file pointing to the DVD. * Stop the ``lorax-composer.service`` if it is running * Move the repo files in ``/etc/yum.repos.d/`` someplace safe * Create a new ``iso.repo`` file in ``/etc/yum.repos.d/``:: [iso] name=iso baseurl=file:///mnt/iso/ enabled=1 gpgcheck=1 gpgkey=file:///mnt/iso/RPM-GPG-KEY-redhat-release * Remove all the cached repo files from ``/var/lib/lorax/composer/repos/`` * Restart the ``lorax-composer.service`` * Check the output of ``composer-cli status show`` for any output specific depsolve errors. For example, the DVD usually does not include ``grub2-efi-*-cdboot-*`` so the live-iso image type will not be available. If you want to *add* the DVD source to the existing sources you can do that by mounting the iso and creating a source file to point to it as described in the `Package Sources`_ documentation. In that case there is no need to remove the other sources from ``/etc/yum.repos.d/`` or clear the cached repos.