You can now open ports in the firewall, using port numbers or service
names:
[customizations.firewall]
ports = ["22:tcp", "80:tcp", "imap:tcp", "53:tcp", "53:udp"]
Or enable/disable services registered with firewalld:
[customizations.firewall.services]
enabled = ["ftp", "ntp", "dhcp"]
disabled = ["telnet"]
If the template contains firewall --disabled it cannot be overridden,
under the assumption that it is required for the image to boot in the
selected environment.
(cherry picked from commit 4d35668ab5)
(cherry picked from commit 9f1756cc27)
You can now set the keyboard layout and language. Eg.
[customizations.locale]
languages = ["en_CA.utf8", "en_HK.utf8"]
keyboard = "de (dvorak)"
Existing entries in the kickstart templates are replaced with the new
ones. If there are no entries then it will default to 'keyboard us' and
'lang en_US.UTF-8'
Includes tests, and leaves the existing keyboard and lang entries in the
templates with a note that they can be replaced by the blueprint.
(cherry picked from commit e5a8700bdf)
(cherry picked from commit 49259c607b)
For example:
[customizations.timezone]
timezone = "US/Samoa"
ntpservers = ["0.pool.ntp.org"]
Also includes tests.
This removes the timezone kickstart command from all of the templates
except for google.ks which needs to set it's own ntp servers and timezone.
If timezone isn't included in the blueprint, and it is not already in a
template, it will be set to 'timezone UTC' by default.
If timezone is set in a template it is left as-is, under the assumption
that the image type requires it to boot correctly.
(cherry picked from commit 9bdbb29662)
(cherry picked from commit 40150508b8)
Otherwise other tests will also fail when they try to run from the wrong
directory.
(cherry picked from commit 65b8a2be68)
(cherry picked from commit 94e2651cf6)
This compose type creates a partitioned disk as a qcow2 file, but with
only one partition instead of using a separate /boot.
(cherry picked from commit 44e14176bb)
(cherry picked from commit 0f59e576d8)
This is based on the VHD compose type, with the following differences:
* Use the vhdx format instead of vhd
* No WALinuxAgent
* Install hyperv-daemons
The hyperv-daemons are activated through udev rules, so there is no need
to add them to the services line.
(cherry picked from commit 434fe58c28)
(cherry picked from commit 367c2583e4)
Modify imgutils.compress to allow the "rootdir" argument to be either a
directory or a single file to add to an archive.
(cherry picked from commit c585b91422)
(cherry picked from commit 5308e7bfec)
If provided, round the disk image size up to a multiple of the value.
This allows for image formats with specific size-alignment requirements
(e.g., disk size must be in GiB).
(cherry picked from commit 8ef4f431d8)
(cherry picked from commit b2a33d5654)
Make sure that dotfiles are installed when not directly under /
Make sure / is not packaged in the rpm (it will cause a conflict with
the filesystem package).
Make sure that using destination="/" works
(cherry picked from commit 6fd06c6931)
(cherry picked from commit d5d60ebe6d)
- Check final-kickstart.ks for the rpm source
- Check final-kickstart.ks for the rpm package name and version
- Make sure depsolve works
- Make sure errors from a bad repo are returned correctly
- Make sure errors from a bad reference are returned correctly
This moves _wait_for_status into a helper function so it can be shared
between the test classes.
(cherry picked from commit 8c2184d59e)
(cherry picked from commit 78f79a94ec)
Log them and report them as RuntimeError. Also add a couple tests for
them.
(cherry picked from commit 61efa91a03)
(cherry picked from commit 087b0fe8c6)
The freeze function was not being tested. Add a test for it using the
repos.git test recipe.
(cherry picked from commit c26477a63c)
(cherry picked from commit bdf5572bc6)
This hooks up creation of the rpm to the build, adds it to the
kickstart, and passes the url to Anaconda. The dnf repo with the rpms is
created under the results directory so it will be included when
downloading the build's results.
(cherry picked from commit cd8c884adb)
(cherry picked from commit 2e596010d3)
This handles creating the rpm from the dictionary describing the
repository and rpm. Also adds tests for archive and rpm creation.
(cherry picked from commit f6f2308765)
(cherry picked from commit efc77c1d71)
This adds support, documentation, and testing for a [[repos.git]]
blueprint section that can be used to install files from a git
repository. It will create an rpm that will be added to the build,
and included in the metadata that can be downloaded. This allows you to
accurately keep track of the source of configuration files and extra
metadata that is added to the build.
The source repo and reference will be listed in the rpm's summary making
it easy to discover on the installed system.
(cherry picked from commit d7b96c8f0f)
(cherry picked from commit 047f174dcf)
Reading a blueprint wasn't checking to see if it had been deleted so it
was returning the most recent commit before it had been deleted. This
allowed things like starting a compose with a blueprint that technically
doesn't exist.
One exception to this is the /changes/ route, it must be available so
that you can use the commit hash to undo a delete.
This also adds tests for the various operations.
Resolves: rhbz#1682113
(cherry picked from commit d32f477e0b)
(cherry picked from commit 82aa9cdbc6)
This allows iso builds to include the extra kernel boot parameters by
passing them to the arch-specific live/*tmpl template.
Also adds tests to make sure it is written to config.toml in the build
metadata.
(cherry picked from commit 5dea308080)
(cherry picked from commit 2861bdb95e)
Sometimes it is necessary to modify the kernel command-line of the
image, this adds support for a [customizations.kernel] section to the
blueprint:
[customizations.kernel]
append = "nosmt=force"
This will be appended to the kickstart's bootloader --append argument.
Includes tests for modifying the bootloader line, the kickstart
template, and examining the final-kickstart.ks created for a compose.
(cherry picked from commit 59464286f9)
(cherry picked from commit c5f4dfe113)
In order to support iso creation on multiple arches with the templates
we need to be able to select different packages based on arch.
lorax-composer uses the arch-specific Lorax templates in order to
generate the output iso so this patch:
1. Creates a new template and type to parse it, live-install.tmpl
which contains only installpkg commands and #if clauses for arch
2. Removes bootloader related packages from the live-iso.ks
3. Remove dracut-config-rescue exclusion because it can cause problems
with some blueprints.
4. Switch logo requirement to system-logos which is satisfied by
generic-logos or fedora-logos. This prevents conflicts when a blueprint
installs fedora-release-workstation.
So in the future, if x86.tmpl, etc. need a new package to support
creating the iso it should be added to the correct section in
./share/live/live-install.tmpl
(cherry picked from commit 3b8de2a233)
reqpart can be used to make kickstarts more platform agnostic, creating
needed partitions without lmc having to keep track of the arch-specific
needs. eg. ppc64 needs prepboot and /boot
This increases the size of the disk based on whether reqpart or
reqpart --add-boot is in the kickstart.
Note that this is only valid for partitioned disk output types, not
for filesystem images or live iso output.
(cherry picked from commit b47554d716)
This also moves the run_creator kickstart checks into check_kickstart
so that tests may be added.
This will close#164
(cherry picked from commit 3676cb65bb)
Some of these can only run as root on a real system with access to loop
devices. They are skipped when running in a container.
(cherry picked from commit 063a1770e1)
Add a /.in-container file to the container root so that tests requiring root
and loop device support will be skipped when running in a container.
(cherry picked from commit bab4b20d0d)
This is complicated by the fact that much of this module requires mount.
So for now just test the things that don't need mount.
(cherry picked from commit 134a333d92)
In some cases when the host has, for whatever reason, multiple copies of
the same repo listed the build may fail with an error about running out
of space.
So this commit removes duplicate entries after the host's repos have been
loaded. It also adjusts some of the test repos to use different
temporary repo names for the tests.
(cherry picked from commit 98482e444d)
Support both
[customizations]
hostname = "whatever"
and
[[customizations]]
hostname = "whatever"
in the blueprint data. The [[ syntax matches the other customization
directives (user, group, sshkey), and as such it's easy to accidentally
use it for the hostname without even realizing it's specifying something
different.
Add some tests for converting customizations to kickstarts.
(cherry picked from commit 35ab6a1336)
When the repository has multiple arches, eg. i686 and x86_64, it should
add a new entry to the project's builds list, not create a new project
in the list.
This handles that by adding a modified insort_left function and
examining the packages returned from dnf to make sure they aren't
already listed in the results. It also handles adding them in sorted
order so that no further sorting needs to be done on the results.
Resolves: rhbz#1656642
(cherry picked from commit d18934775c)
If the system ran out of space, or was rebooted unexpectedly, the state
of the queue symlinks, or the results STATUS files may be inconsistent.
This checks them and:
* Removes broken symlinks from queue/new and queue/run
* Removes symlinks from run and sets the build to FAILED
* Sets builds w/o a STATUS to FAILED
* Sets builds with STATUS of RUNNING to FAILED
* Creates missing queue/new symlinks to results with STATUS of WAITING
So, any builds that were running during the reboot will be FAILED, and
any that were waiting to be started will be started upon rebooting.
Resolves: rhbz#1647985
(cherry picked from commit 4dd9004d13)
This covers things like installing globbed package names from multiple
repos, pinned package versions, and ltmpl functions
Related: rhbz#1548586
(cherry picked from commit a4783ba29f)
Stop using fake dnf object, use the real thing. This will help catch
problems with dnf returning unexpected types like VectorString.
(cherry picked from commit 27aff75aa3)
Anaconda requires the root password to be set or locked, so if there
isn't anything setting it we write out 'rootpw --lock'
Also adds tests for this.
Resolves: rhbz#1626122
This tests to make sure that the metadata timer is working (by setting
it to 10s and adding a new package to the repo), and that
DNFLock.lock_check immediately picks up a new package.
This depends on rpmfluff which is available from Fedora or EPEL repos.
Related: rhbz#1631561
