Commit Graph

58 Commits

Author SHA1 Message Date
Radek Vykydal
975c46b35f Fix duplicate kernel messages in /tmp/syslog (#1382611)
Resolves: rhbz#1382611

The kernel messages will be read from journal so don't use additional imlkog
module to read them duplicitly.

Fixup of
commit b5d0b1fd79
2017-03-02 13:08:44 +01:00
Radek Vykydal
05d271d0d9 Don't log dracut initrd regeneration messages into /tmp/syslog (#1369439)
Related: rhbz#1369439

Keep it same as in RHEL 7.2. They increase the size of the /tmp/syslog file
from ~280K to ~1M, and can be obtained from journal if needed.
2016-08-23 14:55:04 +02:00
Radek Vykydal
b5d0b1fd79 Use imjournal for rsyslogd instead of sharing /dev/log with journal (#1369439)
Resolves: rhbz#1369439

Rsyslogd used to read messages from /dev/log together with systemd-journald
which resulted in NetworkManager messages not being passed to syslog due to a
race condition during starting NetworkManager and rsyslogd service. So use
imjournal rsyslog plugin that picks messages from journald instead of using the
/dev/log socket. Same as regular RHEL 7 system.
2016-08-23 14:50:16 +02:00
Brian C. Lane
e2285683c4 Use eurlatgr as the console font (#1265354)
Resolves: rhbz#1265354
2016-04-19 16:52:07 -07:00
Brian C. Lane
51eac47775 Remove Metacity override and theme (#1324890)
This will now be handled by Anaconda because it is also needed on the
installed system for Initial Setup.

Resolves: rhbz#1324890
2016-04-13 13:38:36 -07:00
Radek Vykydal
420d006ab6 configure NetworkManager to loglevel=DEBUG (#1274647)
Resolves: rhbz#1274647
2016-02-19 16:47:39 -08:00
David Shea
41715eb194 Run spice-vdagentd without systemd-logind integration
The system-wide spice guest agent, spice-vdagentd, normally uses
systemd-logind to determine which of the per-session spice-vdagent
instances it should be communicating with. On the non-live media, the X
session isn't registered with systemd-logind, so instead start
spice-vdagentd with -X to disable the systemd-logind integration and
serve instead to a single spice-vdagent.

(cherry picked from commit 96ecdd4e6e)

Related: rhbz#1169991
2015-08-28 09:46:18 -04:00
David Shea
d93ace517e Replace the metacity theme file.
This replaces the Adwaita metacity-theme-2.xml file with a version that
sets has_title=False and removes the title borders for maximized
windows. This allows anaconda to run as a maximized window instead of a
fullscreen window while still running without a titlebar.

Related: rhbz#1231856
2015-08-26 14:53:47 -04:00
Radek Vykydal
96371548d3 network: turn slaves autoconnection on
So we can activate master connection instead of searching for and activating
slave connections.

Makes turning bond/team device on in network spoke work.

Resolves: rhbz#1172751

It also causes a device configured in dracut to be properly reactivated as a slave
if it is configured so by kickstart.

Resolves: rhbz#1134090
2015-06-26 15:00:27 +02:00
Brian C. Lane
e1655d7c3a aarch64 no longer needs explicit console setting (#1170413)
As of kernel-3.18.0-0.54 aarch64 can sort out what to use for the
console on its own, so drop the console= from the aarch64 grub2-efi.cfg
template.

Resolves: rhbz#1170413

(cherry picked from commit 519771a1df)
2014-12-19 10:16:23 -08:00
Brian C. Lane
6db00b977e Drop 32 bit for loop from ppc64 grub2 config (#1169878)
Older versions of petitboot don't understand the for loop and won't
boot.  We also don't shipt 32 bit media anymore so there is no reason
for this to remain.

(cherry picked from commit 5909574a44)
2014-12-02 12:23:38 -08:00
Dan Horák
d1ec67c8d2 allow setting additional dracut parameters for DVD s390x installs (#1132050)
The installation from DVD on s390x needs setting the target disks and
network information that are usually set by editing the generic.prm file.
By including the "rd.cmdline=ask" parameter dracut will open a simple
dialog so the user can enter the required information.

Resolves: rhbz#1132050
(cherry picked from commit e92ea26206)
2014-08-29 15:30:48 -07:00
Paulo Flabiano Smorigo
af4cf82071 GRUB2 as the ISO boot loader for POWER arch (#1131199)
Currently, yaboot is the ISO boot loader in fedora and the Fedora on
POWER team is making an effort in order to replace it by GRUB2 in the
F20 release cycle. I'm sending a lorax patch so you guys can comment
on it. I'm planning to create a feature page for that too.

This patch only change the lorax template for ppc and should not
affect other archs, like x86.

--
Paulo Flabiano Smorigo
Software Engineer
Linux Technology Center - IBM Systems & Technology Group

Resolves: rhbz#1131199
Signed-off-by: Brian C. Lane <bcl@redhat.com>
2014-08-19 09:19:15 -07:00
d.marlin
bbec9e21bd Update grub2-efi.cfg for aarch64 to more closely match x86 (#1089418).
Resolves: rhbz#1089418.

Signed-off-by: David A. Marlin <dmarlin@redhat.com>
2014-08-12 11:20:29 -07:00
Brian C. Lane
ccb43c2a62 Drop devicetree from aarch64 grub2-efi.cfg (#1089418)
This is non longer needed, Acadia/Biscayne now contains an embedded DTB.

Resolves: rhbz#1089418
2014-07-30 17:01:01 -07:00
Peter Jones
d2de389cba Make lorax's installation of lockdown.efi conditional on its existence.
lockdown.efi only exists in the beta, but it'll probably also exist in
the 7.1 beta.  So don't toss this stuff out completely, but don't use it
if shim doesn't provide lockdown.efi either.

Resolves: rhbz#1071380

Signed-off-by: Peter Jones <pjones@redhat.com>
2014-02-28 11:36:20 -05:00
d.marlin
f2c4d4a43c Improve aarch64 UEFI support (#1067671)
Update the templates and config file to better support EFI on aarch64
on 64-bit ARM.

Resolves: rhbz#1067671

Signed-off-by: David A. Marlin <dmarlin@redhat.com>
Signed-off-by: Brian C. Lane <bcl@redhat.com>
2014-02-24 12:44:14 -08:00
Radek Vykydal
61401e2640 Don't activate default auto connections after switchroot (#1012511)
Related: rhbz#1012511

Add NetworkManager config file turning default auto connections off.
2014-01-31 17:05:25 +01:00
d.marlin
3a5e515d4f Add initial 64-bit ARM (aarch64) support (#1034432)
Signed-off-by: Brian C. Lane <bcl@redhat.com>

Resolves: rhbz#1034432
2013-12-17 10:48:59 -08:00
Brian C. Lane
7f090e3311 s390 switch to generic condev (#1042765)
Resolves: rhbz#1042765
2013-12-16 09:53:31 -08:00
Brian C. Lane
ca3d374a64 Add SB lockdown to EFI grub menu (#1030495)
Resolves: rhbz#1030495
2013-11-15 14:03:17 -08:00
Brian C. Lane
12e03abfa9 Set UEFI defaults to match BIOS (#1021451,#1021446)
60 second timeout and default to testing media.

Resolves: rhbz#1021451
Resolves: rhbz#1021446
2013-10-31 16:17:12 -07:00
Brian C. Lane
649f752c7b Let sshd decide which keys to create (#971856)
In fips mode creation of the protocol 1 key causes it to hang. This
removes the explicit HostKey entries and lets sshd decide which keys to
create when it starts.
2013-06-13 08:39:17 -07:00
Chris Lumens
657228d4fc Make ignoring yum_lock messages in anaconda easier. 2013-06-07 14:11:01 -04:00
Martin Kolman
e1b51a8aac Add command for opening anaconda log file to history
Add a command that opens the anaconda.log file located in /tmp
with less. The command is added as the most recently used.

Signed-off-by: Martin Kolman <mkolman@gmail.com>
2013-05-14 09:08:23 -07:00
Daniel Mach
d79e250b9b Make boot configs consistent.
Make kernel args the same in every config.
Put 'quiet' at the end of the line - it's usually the first thing a user removes when debugging.
Fill missing product versions in.
Distinguish between 'install' (installation media) and 'start' (live media).
2013-01-30 13:15:02 +01:00
Vratislav Podzimek
cfa82ee93f Add trigger for Anaconda's exception handling to bash_history
Sending SIGUSR1 to the Anaconda process raises an exception with
some random data. This can be used to test exception handling and
bug reporting.
2013-01-21 12:40:39 +01:00
Dennis Gilmore
2b1fcaefd0 remove upgrade from the sparc and sysylinux config templates 2012-11-30 13:28:38 -06:00
Martin Gracik
b3cc5a7a45 Remove the default word from boot menu (#848676) 2012-10-11 10:24:11 +02:00
Chris Lumens
52e47bfebe Disable a whole bunch more keyboard shortcuts (#863823). 2012-10-08 13:24:27 -04:00
Chris Lumens
da306b6313 Disable the maximize/unmaximize key bindings (#853410). 2012-08-31 17:11:49 -04:00
Peter Jones
72c1aa9cd3 Add grub2-efi support and Secure Boot shim support.
This adds grub2-efi support in general as well as using the Secure Boot
shim loader on uefi media.
2012-08-13 11:03:40 -04:00
Brian C. Lane
505d5bf164 move live templates into their own subdir of share
live media isn't exactly the same as the Anaconda install media. Right
now this amounts to needing a root= cmdline argument but in the future
there may be other differences.

This also reverts 5437557846 on the new copies of the templates.
2012-07-30 09:22:10 -07:00
Martin Gracik
1000e98555 Cleanup boot menus (#809663) 2012-07-23 09:52:44 +02:00
Martin Gracik
b75422d94e Xauth is in bin (#837317) 2012-07-10 09:57:57 +02:00
Martin Gracik
d731825363 Add the ppc magic file 2012-05-25 08:48:25 +02:00
Will Woods
9d90760f93 Add /etc/sysctl.d/anaconda.conf, set kernel.printk=1 (#816022)
We use this to set various sysctl settings, like setting kernel.printk=1
so we don't get the screen all crudded up with kernel messages during
text-mode installs.
2012-04-27 14:25:50 -04:00
Brian C. Lane
5ca1aa089e add media check menu option
Add an option to check the media
2012-04-23 08:24:34 -07:00
Brian C. Lane
371e59d27f remove unneeded dracut bootargs
anaconda-dracut now adds these itself.
2012-04-23 08:24:34 -07:00
Martin Gracik
73faf711bd Remove root and ip parameters from generic.prm (#796572) 2012-02-28 12:50:34 +01:00
Matthew Garrett
2553a6d5f1 Add findiso to grub config
In order for grub to be able to read the kernel regardless of whether
the image is written to a CD or a USB stick, it's necessary to autoprobe
for the filesystem using the findiso command. Add it to the grub config.
2012-02-14 09:20:22 -08:00
Brian C. Lane
b107181692 Add dracut args to grub.conf 2012-02-10 14:24:32 -08:00
Brian C. Lane
c97666bb94 Add luks, md and dm dracut args to bootloaders 2012-02-03 15:06:21 -08:00
Brian C. Lane
59a1ef8b0b Add config files for live media 2011-12-20 14:59:58 -08:00
Chris Lumens
2168014d3f Set a default font for systemd to load. 2011-10-31 12:55:49 -04:00
Will Woods
0236440581 clean up config_files dir (and fix templates to match)
move arch-specific stuff to arch-specific subdirs and move all the
common stuff to a subdir named 'common'. Also, rename '.profile' and
'.bash_history' so you actually see them when you 'ls' the 'common' dir.

also added some helpful(?) comments to the templates.
2011-10-21 17:35:52 -04:00
Will Woods
2f4b9c16b6 New syslinux config (#734170)
Adapted from commit b3301595bc.
2011-10-21 13:17:15 -04:00
Will Woods
23c7a029ce rsyslog.conf: hardcode hostname for virtio forwarding (#744544)
Patch by Ales Kozumplik <akozumpl@redhat.com>

The value syslogd provides at this early point when kickstart starts is
"(none)". This makes the receiving syslog unable to parse the incoming
messages.
2011-10-13 10:31:45 -04:00
Will Woods
be4d8160b2 Don't create /etc/sysconfig/network (#733425) 2011-09-14 15:28:33 -04:00
Will Woods
fbd23c4234 add boot config files from anaconda to configdir
This adds the boot config files from anaconda to lorax's configdir.

They've been edited to include a '@ROOT@' placeholder, so lorax can put
the proper root=... argument in place, and to use the @VAR@ convention
everywhere (instead of some using @VAR@ and some using %VAR%).

This should probably fix EFI booting, since the EFI BOOT*.conf was
missing its root=... arg.

Also some default settings were changed in syslinux.cfg (so we don't
have to rewrite those two lines every time).

One last change - the '-magic' arg and ppc 'magic' file have been
dropped, because that's kind of silly and unnecessary.
2011-08-08 20:09:32 -04:00