blivet-gui-runtime requires PolicyKit-authentication-agent. If
we just let dnf pick what to satisfy that requirement with, it
picks lxpolkit, which requires gtk2. Specifying polkit-gnome
instead should I think give us a smaller footprint, its deps
seem quite small.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
gnome-firmware is a GNOME app for installing firmwares, no use
here at all. sigrok-firmware is for signal analyzers, again, no
need for it here.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
libnotify dropped the requirement just a couple of months after
this line was added, but we never took it back out again.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
The expectation is that all environments where an editor might be
used should ship GNU nano by default and tools should activate it
when an "editor" is requested. This change should ensure that for
the install media runtime environment.
Reference: https://fedoraproject.org/wiki/Changes/UseNanoByDefault
Resolves: rhbz#1874094
This reverts commit 6025da1421.
It ends up that using the install.img with qemu and PXE and fips=1 is a
common use case. Without vmlinuz in the install.img rootfs it has
nothing to run the check against.
Related: rhbz#1782737
Seems petitboot can't properly parse the live image grub config on ppc, thus
booting fails on bare-metal. Fix the problem by removing the obsolete 32-bit
entries.
The kernel in /boot is not needed. Keep the .vmlinuz*hmac file so that
fips mode can check it (this requires dracut-050 or later).
Related: rhbz#1782737
A change in glibc now requires /proc be mounted in order to run mknod
which is needed in order to run rpm from runtime-postinstall.
This drops that code from the template and moves writing the package
list into run_transaction, which already has all of the needed
information to generate the list.
Resolves: rhbz#1812895
Some of the files no longer exist, some of them have moved. In the case
of dracut the 98systemd directory was renamed to 98dracut-systemd, but
nobody noticed.
This updates the following:
* rename 98systemd to 98dracut-systemd so scripts are in the
install.img
* drop fedora-release removefrom, it now only has os-release
fedora-repos has the repo files, not anaconda, they are moved by
runtime-postinstall.tmpl
* Use initscripts to keep the /etc/init.d, chkconfig only has an empty
directory.
* gtk2-engines is no longer installed
* metacity doesn't include anything in /etc/
* /usr/share/X11/rgb.txt is no longer installed
* libgstbadallocators-1.0.so
The eject utility moved into util-linux and the package was dropped, but
since the runtime-cleanup template is using `removefrom util-linux
--allbut` it was never added to the boot.iso after the move.
This removes the package request for eject and adds it to the list of
binaries to keep from util-linux.
Add lohit-marathi-fonts for Marathi.
Replace kacst-*-fonts with paktype-naskh-basic-fonts for Urdu,
for Arabic, we use dejavu-sans-fonts.
Replace lklug-fonts with google-noto-sans-sinhala-vf-fonts for Sinhala.
Replace lohit-gurmukhi-fonts with google-noto-sans-gurmukhi-fonts for Gurmukhi.
Anaconda uses zram to allow installation on low memory systems.
We used to have a custom script called "zram-stats", that can be
used to test and debug zram usage during installation.
The script no longer works & zramctl now provides much better
output than our script ever did. So we decided to decommission
the old Anaconda provided script & use zramctl instead.
So change the cleanup rule in the Lorax boot.iso template
to keep the zramctl utility.
Related: rhbz#1561773
This new setting for 'find_multipaths' tries to prevent things like
LVM from going ahead and activating LVM on the individual disks/paths
until there is reasonable certainty (via a timeout) that the device
is not a component of a multipath set.
NOTE: 'smart' is supported by device-mapper-multipath v0.7.7 and later.
xorrisofs needs to use iso-level 3 when creating images with large
files. This adds tests to all the relevant templates, just like we used
to do for udf and mkisofs.
It was substituting _ which didn't match what pungi uses for creating
the DVD. Make things consistent and use - as the replacement character.
Resolves: rhbz#1687882
In order to support iso creation on multiple arches with the templates
we need to be able to select different packages based on arch.
lorax-composer uses the arch-specific Lorax templates in order to
generate the output iso so this patch:
1. Creates a new template and type to parse it, live-install.tmpl
which contains only installpkg commands and #if clauses for arch
2. Removes bootloader related packages from the live-iso.ks
3. Remove dracut-config-rescue exclusion because it can cause problems
with some blueprints.
4. Switch logo requirement to system-logos which is satisfied by
generic-logos or fedora-logos. This prevents conflicts when a blueprint
installs fedora-release-workstation.
So in the future, if x86.tmpl, etc. need a new package to support
creating the iso it should be added to the correct section in
./share/live/live-install.tmpl
Most bootloaders used in Fedora already have BootLoaderSpec but extlinux
doesn't yet. So when using extlinux the old grubby must to be installed.
Resolves: rhbz#1649778
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Some files are created in non-reproducible way, including including
random data explicitly (/etc/machine-id), timestamps (fontconfig cache,
ldconfig aux-cache, certs cache), or entries in random order (groups,
systemd catalog, package list).
Fix this by either making the files reproducible, or removing them.
The ostree compose process in pungi wants ISOs and it was the last part
of the ARMv7 components that weren't at parity with other architectures.
Add the missing functionality.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
ARMv7 will now support UEFI and grub2-efi so add those deps. We also don't
require uboot-tools as part of the install process so don't add that
explicitly, and drop grubby from the aarch64 explicit list as it's in the
general list, add grub2-tools-efi.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
As explained in detail in the bug, 'hostname' must be installed
for the dracut 95iscsi module to work (and thus for key iscsi
modules to be included in the initramfs generated by lorax). Up
till recently, we got it as a dependency of initscripts, but
when network-scripts split from initscripts, the dependency went
with it. Now nothing else pulls it in as a dep, so let's just
pull it in explicitly here.
Resolves: rhbz#1593657
Signed-off-by: Adam Williamson <awilliam@redhat.com>
We had only been indirectly pulling in GConf, and anyways
nothing was listening to these keys.
<kalev> I still think it's a fallout from 27a90d973f
Really in general, if we wanted to make changes like this
it'd probably be a lot simpler to do them on boot or so.
https://bugzilla.redhat.com/show_bug.cgi?id=1581838
"anaconda-install-deps" was the original placeholder name
of the metapackage and it looks like I forgot to change it
to "anaconda-install-env-deps", which is the final name
we have decided sounds better.
Oops! (it's even correct in the commit message...)
Use the anaconda-install-env-deps metapackage to pull in the
Anaconda dependencies needed in the installation environment.
The anaconda-install-env-deps metapackage lists all install time
dependencies and makes it possible for packages such as
Initial Setup to depend on Anaconda without pulling all
the (mainly storage related) install time dependencies
to the installed system.
The same is applicable for dirinstall which also does
not require the install time dependencies as it is just
installing to a local folder.
Also drop the tmux and gdb dependencies from the template as
both have been added to the metapackage to make install time
dependency tracking more consistent.
It looks like gnome-helper grew a dependency on it so let's not remove
it. From today's pungi run we can see this error in the verify:
```
libgstgl-1.0.so.0, needed by /usr/bin/gnome-help, not found
```
This reverts commit 13e234ae02.
system-logos is not needed in the runtime-install.tmpl because the
correct *-logos package is already installed by the _install_branding
code in treebuilder.py
The x86.tmpl explicitly references the syslinux-splash provided in
the system-logos package and fails if it's not there so implicitly
install it on arches where syslinux is supported to ensure it's
there. Fixes rhbz #1529239
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
The previous attempt to fix this failed because of operator
ordering, so we actually still tried to build EFI images on
i386, so i386 lives failed. This really fixes it. I tested. I
actually built a 32-bit live and it worked.
Resolves: rhbz#1539085
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This shouldn't have been turned on when we switched to doing ia32-efi
images on x86_64; just having the file available isn't where we want
that policy decision to be.
Resolves: rhbz#1539085
Signed-off-by: Peter Jones <pjones@redhat.com>
kernel-PAE has been intentionally removed from Rawhide kernel
builds; Fedora 27 will be the last release with kernel-PAE for
i686. So we need to not try and install it in future. See
http://pkgs.fedoraproject.org/rpms/kernel/c/21e4b8338 (it's a
big commit, but the change is in there, it's the second change
in kernel.spec).
Signed-off-by: Adam Williamson <awilliam@redhat.com>
pjones and I happened to notice this suspicious line in the
lmc log for a Fedora 27 live image compose:
2017-08-25 16:04:55,327 DEBUG pylorax.ltmpl: template line 25: installimg None usr/share/lorax//product/ images/product.img
That 'None' does not look right. I believe this is the problem.
The command is defined as `installimg ${compressargs} ...`, and
a few lines earlier, `compressargs` is initially assigned (in
Python) as `None`. `None`, in Python, stringifies to the string
'None'. So unless we're on i386 (where `compressargs` gets
defined to an actual string of arguments in a conditional), we
wind up passing in the string 'None' as the first arg to the
`installimg` command.
To fix this, `compressargs` should be initially set to the empty
string rather than `None`.
This enables Baytrail and similar atom CPUs that typically ship with a
32-bit firmware, but have a 64-bit capable CPU.
Signed-off-by: Peter Jones <pjones@redhat.com>
Per dledford, RDMA fundamentally cannot work reliably on 32-bit
ARM arches, so as part of the re-organization of the relevant
packages, building them on 32-bit ARM has been disabled (for
F27+). Thus we should adjust lorax not to try and install them
on 32-bit ARM. Also change the package name, the 'rdma' package
is obsoleted by 'rdma-core'. This commit should not be applied
to branches for older distros.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
When multiple units are passed to systemctl and one fails it doesn't
finish the others. Change the template command to call systemctl for
each unit individually.
This also removes the lvm2-activation-generator in runtime-cleanup.tmpl
This will allow anaconda to fetch kickstarts using https when installing
with fips=1
Leave vmlinuz and .vmlinuz.hmac in /boot
dracut-fips module needs the vmlinuz.hmac file in order to boot.
As of webkitgtk4-2.17.5-1.fc27 , it needs these two as well as
the others. This is breaking Rawhide composes at present.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This is required in the future for anaconda to be able to inspect the
supported locales in Atomic Host installations. This is the same patch
as https://github.com/rhinstaller/lorax/pull/194 but for the master
branch.
Library libmenu.so is needed by lp_diag binary from ppc64-diag
package. It leads to incomplete finish of compose iso generation
on Power. Keeping libmenu.so on PowerPC should fix the problem.
Resolves: rhbz#1461775
Signed-off-by: Sinny Kumari <sinny@redhat.com>
rpm-ostree used to have a requirement on the ostree rpm. It no
longer has that dependency, but rather requires ostree-libs. However,
we call ostree directly in some cases so we need to have it installed.
Resolves: rhbz#1382611
The kernel messages will be read from journal so don't use additional imlkog
module to read them duplicitly.
Fixup of
commit 3eca8a0425
with readline 7 libreadline.so moved to libdir as a result it is
currently removed in the cleanup phase, however it is needed
Signed-off-by: Dennis Gilmore <dennis@ausil.us>
Signed-off-by: Brian C. Lane <bcl@redhat.com>
* `rsh` not used in anaconda now (can't find any mentions)
* `rsh` duplicates already existing ssh
* `rsh` not secure enough these days
Signed-off-by: Brian C. Lane <bcl@redhat.com>
