This compose type creates a partitioned disk as a qcow2 file, but with
only one partition instead of using a separate /boot.
(cherry picked from commit 44e14176bb)
Resolves: rhbz#1689140
This adds a new livemedia-creator argument, --extra-boot-args, which can
be used to add arguments to the kernel command-line in the templates.
Related: rhbz#1687743
In order to support iso creation on multiple arches with the templates
we need to be able to select different packages based on arch.
lorax-composer uses the arch-specific Lorax templates in order to
generate the output iso so this patch:
1. Creates a new template and type to parse it, live-install.tmpl
which contains only installpkg commands and #if clauses for arch
2. Removes bootloader related packages from the live-iso.ks
3. Remove dracut-config-rescue exclusion because it can cause problems
with some blueprints.
4. Switch logo requirement to system-logos which is satisfied by
generic-logos or fedora-logos. This prevents conflicts when a blueprint
installs fedora-release-workstation.
So in the future, if x86.tmpl, etc. need a new package to support
creating the iso it should be added to the correct section in
./share/live/live-install.tmpl
Resolves: rhbz#1673744
If a package is excluded in the template and later added by a blueprint
or dependency, anaconda will fail to finish the installation. So remove
the -dracut-config-rescue exclusion and instead remove the rescue
artifacts in %post
Related: rhbz#1673744
Some platforms, like ppc64, require that the /boot partition be present.
It doesn't hurt to have it there on other platforms so instead of trying
to add per-arch kickstart templates just use reqpart --add-boot
everywhere.
Related: rhbz#1673744
Apparently nobody has used these since the switch to py3, xrange is now
range and it needs to read the file in binary mode when generating the
sha256.
Related: rhbz#1673744
Some platforms do not have grub2, and some require other partitions.
Anaconda will add platform specific partitions if the 'reqpart' command
is included, and it will add bootloader specific packages to the list if
they are needed.
Related: rhbz#1673744
This is required to ensure that SELinux is configured properly while
building. It fixes the problem with building tar, and should be
installed in the other image types for consistency.
Resolves: rhbz#1645189
Images don't work without these fixes:
* Enable Network Manager.
* Disable cloud-init.
* Add Hyper-V modules into initramfs.
Fixes specific for RHEL:
* Create ifcfg-eth0 required by waagent.
* Install python3 and net-tools required by waagent.
Recommended changes:
* Use recommended kernel boot args.
* Disable kdump.
Related: rhbz#1628648
Since these images can be used to create multiple machines, they should
not have a unique machine-id attached to them. Replace /etc/machine-id
with an empty file so that it will be regenerated at boot time.
(cherry picked from commit 6fab72d894)
Related: rhbz#1628645
Related: rhbz#1628646
Related: rhbz#1628647
Related: rhbz#1628648
This is similar to the AMI type, but also adds open-vm-tools and does not do
anything special to the partitioning
(cherry picked from commit 1056bfc25b)
Resolves: rhbz#1628646
This does pretty much the same things as the AMI compose type, but also
replaces NetworkManager with the Azure linux agent.
(cherry picked from commit e0c236ff36)
Resolves: rhbz#1628648
This differs from lmc's --make-ami in that creates a full disk image instead of
an fsimage. Create a raw disk image with a / and /boot partitions, and enable
sshd, chronyd, and cockpit by default.
(cherry picked from commit 18188bf6cf)
Resolves: rhbz#1628647
If we leave the root account w/o a password people will use it that way,
leading to insecure images. Also if we use a default password. So lock
the root account in the templates.
Users will need to do one of these things:
1. Use [[customizations.user]] in their blueprint to configure root or
another user.
2. Use [[customizations.sshkey]] to set a key for root
2. Install a package that configures a user at install time
3. Install a package that sets up a user at boot time (eg. cloud-init)
This also drops the auth line from the kickstart templates, allowing it
to use the default password algoritm instead of md5.
Resolves: rhbz#1626122
The service is a part of initscripts package which is no more pulled in as a
transitive dependcy so we have to require it explicitly.
Resolves: rhbz#1618668
Currently we are making MBR disk images for qcow2 and partitioned disk,
so the UEFI packages aren't required at this point.
Move the clearpart command into compose.py so that in the futute it can
use clearpart --disklabel to create a GPT image, and add the required
packages to the package set.
As explained in detail in the bug, 'hostname' must be installed
for the dracut 95iscsi module to work (and thus for key iscsi
modules to be included in the initramfs generated by lorax). Up
till recently, we got it as a dependency of initscripts, but
when network-scripts split from initscripts, the dependency went
with it. Now nothing else pulls it in as a dep, so let's just
pull it in explicitly here.
Resolves: rhbz#1599183
Signed-off-by: Adam Williamson <awilliam@redhat.com>
(cherry picked from commit 7f805287ca)
We had only been indirectly pulling in GConf, and anyways
nothing was listening to these keys.
<kalev> I still think it's a fallout from 27a90d973f
Really in general, if we wanted to make changes like this
it'd probably be a lot simpler to do them on boot or so.
https://bugzilla.redhat.com/show_bug.cgi?id=1581838
(cherry picked from commit bb3d8edd06)
- drop kernel-bootwrapper as it was used with 32-bit ppc
- replace ppc64-utils meta-package (to be retired) with the real requirements
(cherry picked from commit 1d32a0cb36)
"anaconda-install-deps" was the original placeholder name
of the metapackage and it looks like I forgot to change it
to "anaconda-install-env-deps", which is the final name
we have decided sounds better.
Oops! (it's even correct in the commit message...)
(cherry picked from commit db9e2a1e41)
Signed-off-by: Brian C. Lane <bcl@redhat.com>
Use the anaconda-install-env-deps metapackage to pull in the
Anaconda dependencies needed in the installation environment.
The anaconda-install-env-deps metapackage lists all install time
dependencies and makes it possible for packages such as
Initial Setup to depend on Anaconda without pulling all
the (mainly storage related) install time dependencies
to the installed system.
The same is applicable for dirinstall which also does
not require the install time dependencies as it is just
installing to a local folder.
Also drop the tmux and gdb dependencies from the template as
both have been added to the metapackage to make install time
dependency tracking more consistent.
(cherry picked from commit 106f330bb2)
Signed-off-by: Brian C. Lane <bcl@redhat.com>
It looks like gnome-helper grew a dependency on it so let's not remove
it. From today's pungi run we can see this error in the verify:
```
libgstgl-1.0.so.0, needed by /usr/bin/gnome-help, not found
```
This reverts commit 13e234ae02.
system-logos is not needed in the runtime-install.tmpl because the
correct *-logos package is already installed by the _install_branding
code in treebuilder.py
The x86.tmpl explicitly references the syslinux-splash provided in
the system-logos package and fails if it's not there so implicitly
install it on arches where syslinux is supported to ensure it's
there. Fixes rhbz #1529239
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
The previous attempt to fix this failed because of operator
ordering, so we actually still tried to build EFI images on
i386, so i386 lives failed. This really fixes it. I tested. I
actually built a 32-bit live and it worked.
Resolves: rhbz#1539085
Signed-off-by: Adam Williamson <awilliam@redhat.com>
This shouldn't have been turned on when we switched to doing ia32-efi
images on x86_64; just having the file available isn't where we want
that policy decision to be.
Resolves: rhbz#1539085
Signed-off-by: Peter Jones <pjones@redhat.com>
kernel-PAE has been intentionally removed from Rawhide kernel
builds; Fedora 27 will be the last release with kernel-PAE for
i686. So we need to not try and install it in future. See
http://pkgs.fedoraproject.org/rpms/kernel/c/21e4b8338 (it's a
big commit, but the change is in there, it's the second change
in kernel.spec).
Signed-off-by: Adam Williamson <awilliam@redhat.com>
pjones and I happened to notice this suspicious line in the
lmc log for a Fedora 27 live image compose:
2017-08-25 16:04:55,327 DEBUG pylorax.ltmpl: template line 25: installimg None usr/share/lorax//product/ images/product.img
That 'None' does not look right. I believe this is the problem.
The command is defined as `installimg ${compressargs} ...`, and
a few lines earlier, `compressargs` is initially assigned (in
Python) as `None`. `None`, in Python, stringifies to the string
'None'. So unless we're on i386 (where `compressargs` gets
defined to an actual string of arguments in a conditional), we
wind up passing in the string 'None' as the first arg to the
`installimg` command.
To fix this, `compressargs` should be initially set to the empty
string rather than `None`.
