Commit Graph

88 Commits

Author SHA1 Message Date
David Shea
52b7c4dd06 Revert "Revert "Turn off ldconfig""
We really shouldn't need to run ldconfig on boot from read-only media,
unless someone messed up %post in a package. And the verify step will
catch that.

This reverts commit 3981ff5b79.
2015-07-20 16:18:20 -04:00
Brian C. Lane
d6584e1d77 Create an empty selinux config file (#1243168)
In order for selinux to properly label the system it needs to see that
the config file exists.

Also remove the old code trying to copy in a selinux config file, it
never worked -- the removepkg would remove it.
2015-07-20 11:32:31 -07:00
Radek Vykydal
c0516dd961 network: turn slaves autoconnection on
So we can activate master connection instead of searching for and activating
slave connections.

Makes turning bond/team device on in network spoke work.

Resolves: rhbz#1172751

It also causes a device configured in dracut to be properly reactivated as a slave
if it is configured so by kickstart.

Resolves: rhbz#1134090
2015-07-01 10:42:46 +02:00
Brian C. Lane
a4d350a177 Disable systemd-tmpfiles-clean (#1202545)
When the time changes dramatically it cleans up the files in /tmp/
causing problems with the installation.

Resolves: rhbz#1202545
2015-06-15 14:48:30 -07:00
Brian C. Lane
da4456eda9 Stop moving sitecustomize into site-packages
Now that anaconda is python3 this is not needed.
2015-06-10 10:15:02 -07:00
Brian C. Lane
3981ff5b79 Revert "Turn off ldconfig"
This reverts commit c4c90e0b5e.

Appears to be causing rhbz#1201897
2015-03-20 17:26:32 -07:00
Brian C. Lane
c4c90e0b5e Turn off ldconfig
We don't need to update ldconfig when running the boot.iso, disable it
to speed up the boot.
2015-03-06 11:26:50 -08:00
David Shea
d746ea7323 Remove the GSettings overrides for metacity
Let anaconda figure this out on its own.
2015-01-15 10:36:16 -05:00
Brian C. Lane
5a42ab73a5 Remove diagnostic product.img test (#1165425)
Yeah. Pushed my test template on accident. Sorry about that.
2014-11-18 15:19:42 -08:00
Brian C. Lane
ac6e4a29c3 Update templates to use installimg for product and updates
With these templates if a package has installed files in
/usr/share/lorax/product or /usr/share/lorax/updates/ they will be used
to create product.img and/or updates.img which will be included in the
images/ directory of the iso and of the final output tree.

These can be used to customize the installation environment or provide
updates. See README.product for current documentation.
2014-11-05 16:13:40 -08:00
Brian C. Lane
a7a3dd276d Setup mdadm to turn off homehost (#1156614) 2014-11-03 17:19:57 -08:00
David Lehman
4a7552d4be Don't include the stock lvm.conf. (#1157864)
We started including it as an unintended side-effect of commit 9ca487f8.

lvm doesn't like it when there are multiple 'global' sections in lvm.conf,
and we add one right at the end of that block. We expect ours to be the
file's only content.
2014-10-28 12:41:24 -05:00
Brian C. Lane
c04ff4132b Write list of packages to /root/lorax-packages.log 2014-10-21 10:05:13 -07:00
Vratislav Podzimek
9ca487f87a Keep the /etc/lvm/profiles directory in the image
Profile definitions are needed e.g. for creation of thin pools with specific
profile.

Related: rhbz#869456
2014-10-03 11:42:28 +02:00
David Shea
7e66ceb9b6 Remove at-spi
at-spi is the old accessibility library, deprecated in these gtk3 times
by at-spi2-atk. at-spi-corba has been replaced with atk-bridge.
at-spi2-atk is a dependency of gtk3, so there's no need to explicitly
add it.
2014-09-22 17:16:49 -04:00
Brian C. Lane
d828bed65d Disable dnf-makecache.timer (#1120368)
We don't want to update the dnf cache in the installation image. The
metadata will be downloaded when it is needed.
2014-07-18 14:46:23 -07:00
Brian C. Lane
18beed1d27 Drop writing to resolv.conf in postinstall
This isn't needed. NetworkManager handles it.
2014-07-10 11:24:39 -07:00
David Shea
0d83979894 Convert metacity gconf settings into gsettings schema overrides
The settings in /apps/metacity/general are now covered by gsettings in
org.gnome.desktop.wm.preferences. The keybinding settings are already
covered by the overrides for org.gnome.desktop.wm.keybindings.
2014-07-02 11:57:18 -04:00
Brian C. Lane
766300d82c The theme has been absorbed into gtk3
and is now the default, so just use it instead of writing a settings.ini
2014-06-27 07:58:52 -07:00
Will Woods
dff15426f1 Activate anaconda-shell@.service on switch to empty VT (#980062)
Right now, logind reserves tty6 for a login shell, which is not what we
want - normally anaconda puts Xorg there, and there's no need for a
login prompt anyway.

This configures logind to activate "anaconda-shell@.service" when a user
switches to an unused tty, and reserves tty2 for that purpose (which is
where users expect a shell anyway).

This will avoid us having login prompts that users don't know what to do
with. It also probably saves us a little bit of RAM.
2014-01-21 13:34:31 -05:00
Brian C. Lane
e0ff5eb254 sort glob output before using it 2013-12-13 09:33:02 -08:00
Chris Lumens
875cbd0d74 Make sure we have a theme settings file in place.
We need this because there's no settings daemon running, but running one
would be the alternate fix.
2013-08-22 16:17:17 -04:00
David Shea
96ecdd4e6e Run spice-vdagentd without systemd-logind integration (#969405)
The system-wide spice guest agent, spice-vdagentd, normally uses
systemd-logind to determine which of the per-session spice-vdagent
instances it should be communicating with. On the non-live media, the X
session isn't registered with systemd-logind, so instead start
spice-vdagentd with -X to disable the systemd-logind integration and
serve instead to a single spice-vdagent.
2013-08-06 14:35:48 -04:00
Will Woods
270cb8272e Remove /var/log/journal so journald won't write to overlay
It's pretty pointless to copy data from /run/log/journal to
/var/log/journal, since both of those are in-memory filesystems.

This should somewhat reduce RAM use during installation.
2013-04-29 13:44:42 -04:00
David Lehman
577d9cc954 Let devices get detected and started automatically.
Also stop masking fedora-storage-* units as they no longer exist.
2013-04-08 09:54:42 -05:00
Brian C. Lane
73717a5288 Make sure tmpfs is enabled (#908253) 2013-02-14 16:55:46 -08:00
Jesse Keating
f2bcfafa85 Change the install user's shell for tmux 2012-10-11 10:25:56 -07:00
Martin Gracik
fb69670ea8 There's no lang-table in anaconda anymore (#857925) 2012-09-17 11:41:39 -07:00
Chris Lumens
da306b6313 Disable the maximize/unmaximize key bindings (#853410). 2012-08-31 17:11:49 -04:00
Jesse Keating
07d8f3f723 Revert "Mask the tmp.mount service to avoid tmpfs"
This reverts commit ca15f6d2ba.

Anaconda now handles /tmp being tmpfs with regard to updates and product
images.
2012-08-29 14:04:56 -07:00
Jesse Keating
ca15f6d2ba Mask the tmp.mount service to avoid tmpfs
Anaconda runtime is already in memory, no need to use tmpfs here.  In
fact use of tmpfs here will overwrite any updates content that was put
in place by dracut.
2012-08-15 15:11:39 -07:00
Will Woods
6d1e637731 Add plymouth to the installer runtime
Now we can have bootsplash if we want. Whee!
2012-06-19 20:00:00 -04:00
Will Woods
3a75b2e07d add 'systemctl' command and use it in postinstall
The 'systemctl' command can be used to enable, disable, or mask systemd
units inside the runtime being modified. Modify runtime-postinstall.tmpl
to use the 'systemctl' command.

We also no longer remove quota*.service or kexec*.service, since
these aren't enabled by default. And systemd-remount-api-vfs.service
should work correctly now, so we can leave it alone as well.
2012-06-19 20:00:00 -04:00
Will Woods
68f97a3cfd Create missing /etc/fstab
Some things (e.g. systemd-remount-api-vfs) fail if /etc/fstab is
missing, but work fine if it's empty. So create it.
2012-06-19 19:59:20 -04:00
Will Woods
24a6430098 Fix systemd unit cleanup in runtime-postinstall
A lot of the systemd unit files got moved around due to UsrMove, so
these lines weren't removing the services as expected.

Fix the paths and they all work. This eliminates the "FAILED"
message from systemd-remount-api-vfs.service and plymouth-start.service.

Oh - and the ConsoleKit removal got dropped 'cuz ConsoleKit isn't in the
installer images anymore.
2012-06-17 15:34:20 -04:00
Martin Gracik
ebbd13c93c Disable Alt+Tab in metacity 2012-06-14 14:54:35 +02:00
Will Woods
26f7a706e9 remove 'loadkeys' stub (#804306)
Just use the regular 'loadkeys' binary, for pity's sake.
2012-05-25 08:54:28 +02:00
Dan Horák
00ec88dac7 linuxrc.s390 is dead in anaconda 2012-05-25 08:48:39 +02:00
Brian C. Lane
b1ba9cacca stop moving /run (#818918)
This was a hack, /run is on tmpfs so lorax should leave it to the apps
to create their own directories.
2012-05-08 10:45:03 -07:00
Will Woods
9d90760f93 Add /etc/sysctl.d/anaconda.conf, set kernel.printk=1 (#816022)
We use this to set various sysctl settings, like setting kernel.printk=1
so we don't get the screen all crudded up with kernel messages during
text-mode installs.
2012-04-27 14:25:50 -04:00
Will Woods
b856297986 add symlink from /mnt/install -> /run/install
Since noloader mounts stuff under /run/install, but anaconda (and
people's scripts etc.) look under /mnt/install, make a symlink so
everything works as expected.
2012-03-30 13:22:54 -07:00
Will Woods
1fe6e6ce54 Don't trash all the initscripts 'fedora*' services
We need some of them (fedora-import-state.service), so let's just
disable the ones that cause us problems (mostly fedora-storage*).
2012-03-30 13:22:48 -07:00
Will Woods
34f5397768 runtime-postinstall: remove references to loader
No more loader. Bye-bye, loader.
2012-03-30 13:22:48 -07:00
Will Woods
d61f330462 runtime-postinstall: remove keymap stuff
anaconda no longer contains the keymap overrides and systemd should be
handling keymap stuff for us, so this isn't necessary.
2012-03-30 13:22:48 -07:00
Martin Gracik
08e7a19f42 Make sure var/run is not a symlink on s390x (#787217) 2012-02-09 10:34:07 +01:00
Martin Gracik
5af1ea948e Create var/run/dbus directory on s390x (#787217)
s390x has no systemd, so we need to create the directory.
2012-02-09 10:34:07 +01:00
Will Woods
e3bb8700c6 postinstall: fix root account password (#750907)
'replace' uses regexes, so that '*' needs to be escaped...

Signed-off-by: Will Woods <wwoods@redhat.com>
2011-11-08 11:29:53 -05:00
Will Woods
235962e30a drop workaround for pre-f16 anaconda's tmp.mount 2011-11-02 15:06:09 -04:00
Will Woods
3dde9f6316 fix postinstall user creation/modification (fixes #750907)
We were appending to /etc/shadow when previous versions of lorax
overwrote it, so we ended up with two conflicting entries for "root".

Instead:
- keep existing /etc/shadow and /etc/passwd contents
- add new entries for "install" user
- remove password from existing "root" entry in /etc/shadow

Also, we don't need to create the 'sshd' user, because the
openssh-server %post script does that for us.
2011-11-02 15:05:59 -04:00
Chris Lumens
2168014d3f Set a default font for systemd to load. 2011-10-31 12:55:49 -04:00