This compose type creates a partitioned disk as a qcow2 file, but with
only one partition instead of using a separate /boot.
(cherry picked from commit 44e14176bb)
Resolves: rhbz#1689140
If provided, round the disk image size up to a multiple of the value.
This allows for image formats with specific size-alignment requirements
(e.g., disk size must be in GiB).
(cherry picked from commit 8ef4f431d8)
Related: rhbz#1689140
The root account checks are applied to generated and deployed images
to make sure that root account is locked, except for live ISO.
Related: rhbz#1626122
This allows iso builds to include the extra kernel boot parameters by
passing them to the arch-specific live/*tmpl template.
Also adds tests to make sure it is written to config.toml in the build
metadata.
Resolves: rhbz#1687743
Sometimes it is necessary to modify the kernel command-line of the
image, this adds support for a [customizations.kernel] section to the
blueprint:
[customizations.kernel]
append = "nosmt=force"
This will be appended to the kickstart's bootloader --append argument.
Includes tests for modifying the bootloader line, the kickstart
template, and examining the final-kickstart.ks created for a compose.
Related: rhbz#1687743
Reading a blueprint wasn't checking to see if it had been deleted so it
was returning the most recent commit before it had been deleted. This
allowed things like starting a compose with a blueprint that technically
doesn't exist.
One exception to this is the /changes/ route, it must be available so
that you can use the commit hash to undo a delete.
This also adds tests for the various operations.
(cherry picked from commit d32f477e0b)
Resolves: rhbz#1683441
In order to support iso creation on multiple arches with the templates
we need to be able to select different packages based on arch.
lorax-composer uses the arch-specific Lorax templates in order to
generate the output iso so this patch:
1. Creates a new template and type to parse it, live-install.tmpl
which contains only installpkg commands and #if clauses for arch
2. Removes bootloader related packages from the live-iso.ks
3. Remove dracut-config-rescue exclusion because it can cause problems
with some blueprints.
4. Switch logo requirement to system-logos which is satisfied by
generic-logos or fedora-logos. This prevents conflicts when a blueprint
installs fedora-release-workstation.
So in the future, if x86.tmpl, etc. need a new package to support
creating the iso it should be added to the correct section in
./share/live/live-install.tmpl
Resolves: rhbz#1673744
reqpart can be used to make kickstarts more platform agnostic, creating
needed partitions without lmc having to keep track of the arch-specific
needs. eg. ppc64 needs prepboot and /boot
This increases the size of the disk based on whether reqpart or
reqpart --add-boot is in the kickstart.
Note that this is only valid for partitioned disk output types, not
for filesystem images or live iso output.
Related: rhbz#1673744
Add a /.in-container file to the container root so that tests requiring root
and loop device support will be skipped when running in a container.
Related: rhbz#1673744
this will allow you to test against installed RPM like so:
# export CLI="/usr/bin/composer-cli"
# make test_images
If you already have lorax-composer running then you can directly
execute test scripts:
# ./tests/cli/test_build_and_deploy_aws.sh
Related: rhbz#1678937
- on some arches (also Fedora x86_64) systemd-nspawn may not be
available
- delete composes from other tests in rlPhaseStartCleanup because
we're seeing the tar compose kind of hanging in Jenkins and that
test script is executed last so the slave may be running out of
disk space. Be a good citizen and clean up after the previous
tests.
Related: rhbz#1653934
b/c we've migrated to Upshift we must use different instance type,
specify the desired network to connect to and update how we get
the ip address of the launched VM.
Related: rhbz#1653934
the unittest suite is currently executed on Fedora where tmux is
version 2.8 but on RHEL 8 it is 2.7 and depsolve fails when
building images.
Related: rhbz#1653934
Related: rhbz#1653934
note: for now use Fedora 28 for the Docker container until
CentOS 8 is released or we figure out how to use subscriptions
for official RHEL 8 images.
Support both
[customizations]
hostname = "whatever"
and
[[customizations]]
hostname = "whatever"
in the blueprint data. The [[ syntax matches the other customization
directives (user, group, sshkey), and as such it's easy to accidentally
use it for the hostname without even realizing it's specifying something
different.
Add some tests for converting customizations to kickstarts.
(cherry picked from commit 35ab6a1336)
Resolves: rhbz#1664485
When the repository has multiple arches, eg. i686 and x86_64, it should
add a new entry to the project's builds list, not create a new project
in the list.
This handles that by adding a modified insort_left function and
examining the packages returned from dnf to make sure they aren't
already listed in the results. It also handles adding them in sorted
order so that no further sorting needs to be done on the results.
Resolves: rhbz#1656642
Depending on which version of dnf is installed it may return a tuple, or
may return a list. Work around this by only comparing the 1st element of
it.
Related: rhbz#1655876
Stop using fake dnf object, use the real thing. This will help catch
problems with dnf returning unexpected types like VectorString.
(cherry picked from commit 27aff75aa3)
Related: rhbz#1655876
Anaconda is currently not able to handle cdn repo urls in the kickstart.
Add a new function that checks for extra repos and returns True.
Related: rhbz#1655623
If the system ran out of space, or was rebooted unexpectedly, the state
of the queue symlinks, or the results STATUS files may be inconsistent.
This checks them and:
* Removes broken symlinks from queue/new and queue/run
* Removes symlinks from run and sets the build to FAILED
* Sets builds w/o a STATUS to FAILED
* Sets builds with STATUS of RUNNING to FAILED
* Creates missing queue/new symlinks to results with STATUS of WAITING
So, any builds that were running during the reboot will be FAILED, and
any that were waiting to be started will be started upon rebooting.
Resolves: rhbz#1647985
(cherry picked from commit 4dd9004d13)
Anaconda requires the root password to be set or locked, so if there
isn't anything setting it we write out 'rootpw --lock'
Also adds tests for this.
Resolves: rhbz#1626122
Also kill the lorax-composer process and remove /run/weldr/api.socket
so that when this is run with podman you don't get an error about
attempting to tar up the socket.
Related: rhbz#1613058
- need to specify --sharedir so lorax-composer can find its
kickstart files
- each test script writes results into a separate directory to
avoid a passing test overwriting the results from a failing one.
To avoid reporting failures in case of previously failing tests
(e.g. during development) remove the temporary directories holding
tets results before execution!
these are built on top of beakerlib and we use its internal
protocol to figure out the result without relying on the full
test runner that is tipically used inside of a RHEL environment!
Includes a disabled test snippet for Issue #460
This is similar to the AMI type, but also adds open-vm-tools and does not do
anything special to the partitioning
(cherry picked from commit 1056bfc25b)
Resolves: rhbz#1628646
This does pretty much the same things as the AMI compose type, but also
replaces NetworkManager with the Azure linux agent.
(cherry picked from commit e0c236ff36)
Resolves: rhbz#1628648
This differs from lmc's --make-ami in that creates a full disk image instead of
an fsimage. Create a raw disk image with a / and /boot partitions, and enable
sshd, chronyd, and cockpit by default.
(cherry picked from commit 18188bf6cf)
Resolves: rhbz#1628647
This tests to make sure that the metadata timer is working (by setting
it to 10s and adding a new package to the repo), and that
DNFLock.lock_check immediately picks up a new package.
This depends on rpmfluff which is available from Fedora or EPEL repos.
Related: rhbz#1631561
Passing ?limit=0 to the blueprints/list, blueprints/changes,
projects/list, modules/list should always return the total possible
results, not 0.
Also move the composer-cli test_diff to the end so that it will work
consistently. Do this by naming it test_z_diff.
(cherry picked from commit 972b5c4142)
Note the exception string checking around compose_type. I didn't really
want to introduce a new exception type just for this, but also didn't
want to duplicate strings. I'd be open to other suggestions for how to
do this.
(cherry picked from commit b3bb438254)
This adds some fairly redundant code to the beginning of all the
blueprint routes to attempt reading a commit from git for the
blueprint's recipe. If it succeeds, the blueprint exists and the route
can continue. Otherwise, return an error. Hopefully this doesn't slow
things down too much.
(cherry picked from commit a925cc7ddb)
Note that this also changes the return type of uuid_info to return None
when an unknown ID is given. The other uuid_* functions are fine
because they are checked ahead of time.
(cherry picked from commit 6497b4fb65)
Make sure no UTF8 characters are allowed and return an error if they
are.
Also includes tests to make sure the correct error is returned.
(cherry picked from commit 86d79cd8a6)
Currently the code is not UTF8 safe, so we need to return a clear error
when invalid characters are passed in.
This also adds tests for the routes to confirm that an error is
correctly returned.
(cherry picked from commit 74f5def3d4)
These depend on there being a freshly installed lorax-composer API
server running, if there is no /run/weldr/api.socket they will be
skipped.
(cherry picked from commit 7700ae3135)
This adds empty __init__.py to tests so that a lib.py library of helper
functions can be imported from the tests.
Add captured_output to use with composer-cli tests to capture stdout/err
output from the functions.
(cherry picked from commit eeae331ba0)
Some results have errors and no status, others have status and errors.
Update the function to return the final rc to exit with, and a bool
indicating whether or not to continue processing the other fields.
Add a bunch of tests for the new function to make sure I have the logic
correct.
(cherry picked from commit 35fa067219)
This adds a new argument to projects_depsolve and
projects_depsolve_with_size that contains the group list, unfortunately.
I would have prefered adding a function that just returns a list of all
the contents of a group and then add that to what was being passed into
projects_depsolve. However, there does not appear to be any good way to
do that in yum aside from a lot of grubbing around in the comps object,
which I am unwilling to do.
(cherry picked from commit 0259f3564d)
Depsolve the packages included in the templates and report any errors
using the /api/status 'msgs' field. This should help narrow down
problems with package sources not being setup correctly.
(cherry picked from commit d92f2f5b04)
It is perfectly valid to have more than one build of a package, eg. one
in the release repo and one in the updates repo.
(cherry picked from commit 86c4ef5f45)
DNF Repo.dump() function cannot be used as a .repo file for dnf due to
it writing baseurl and gpgkey as a list instead of a string. Add a new
function to write this in the correct format, and limited to the fields
we use.
Add a test for the new function.
Fix /projects/source/info to return an error 400 if a nonexistant TOML
source is requested. If JSON is used the error is part of the standard
response.
Update test_server.py to check for the correct error code.
(cherry picked from commit afa89ea657)
When adding a source failed it wasn't being removed from the dnf object.
This fixes that, and returns an error when setting up the source fails.
Also adds a test for it.
This also includes detecting rawhide vs. non-rawhide releases and
adjusting the tests accordingly (some of the source names change).
(cherry picked from commit dd8e4d9e99)
This uses dnf's version__glob filter to implement it. It amounts to '*'
wildcards and '?' for single character matching.
(cherry picked from commit 095829171a)
This adds support for the optional blueprint section [customizations].
Use it like this:
[customizations]
hostname = yourhostnamehere
[[customizations.sshkey]]
user = root
key = root user key
Change versions to match Fedora versions. Add version numbers to the
blueprints except for glusterfs.toml, not having a version is used as
part of the tests.
Fix up 2to3 complaints. I've decided to do with wrapping list
comprehension inside list() to get the generators to run in several
places instead of list(map( or list(filter( which seem less readable to
me.