To maintain consistency with the other options this changes firewall to
combine the existing settings from the image template with the settings
from the blueprint.
Also updated the docs, added a new test for it, and sorted the output
for consistency.
Add support for enabling and disabling systemd services in the
blueprint. It works like this:
[customizations.services]
enabled = ["sshd", "cockpit.socket", "httpd"]
disabled = ["postfix", "telnetd"]
They are *added* to any existing settings in the kickstart templates.
You can now open ports in the firewall, using port numbers or service
names:
[customizations.firewall]
ports = ["22:tcp", "80:tcp", "imap:tcp", "53:tcp", "53:udp"]
Or enable/disable services registered with firewalld:
[customizations.firewall.services]
enabled = ["ftp", "ntp", "dhcp"]
disabled = ["telnet"]
If the template contains firewall --disabled it cannot be overridden,
under the assumption that it is required for the image to boot in the
selected environment.
You can now set the keyboard layout and language. Eg.
[customizations.locale]
languages = ["en_CA.utf8", "en_HK.utf8"]
keyboard = "de (dvorak)"
Existing entries in the kickstart templates are replaced with the new
ones. If there are no entries then it will default to 'keyboard us' and
'lang en_US.UTF-8'
Includes tests, and leaves the existing keyboard and lang entries in the
templates with a note that they can be replaced by the blueprint.
For example:
[customizations.timezone]
timezone = "US/Samoa"
ntpservers = ["0.pool.ntp.org"]
Also includes tests.
This removes the timezone kickstart command from all of the templates
except for google.ks which needs to set it's own ntp servers and timezone.
If timezone isn't included in the blueprint, and it is not already in a
template, it will be set to 'timezone UTC' by default.
If timezone is set in a template it is left as-is, under the assumption
that the image type requires it to boot correctly.
This is based on the VHD compose type, with the following differences:
* Use the vhdx format instead of vhd
* No WALinuxAgent
* Install hyperv-daemons
The hyperv-daemons are activated through udev rules, so there is no need
to add them to the services line.
If provided, round the disk image size up to a multiple of the value.
This allows for image formats with specific size-alignment requirements
(e.g., disk size must be in GiB).
Make sure that dotfiles are installed when not directly under /
Make sure / is not packaged in the rpm (it will cause a conflict with
the filesystem package).
Make sure that using destination="/" works
This allows iso builds to include the extra kernel boot parameters by
passing them to the arch-specific live/*tmpl template.
Also adds tests to make sure it is written to config.toml in the build
metadata.
Sometimes it is necessary to modify the kernel command-line of the
image, this adds support for a [customizations.kernel] section to the
blueprint:
[customizations.kernel]
append = "nosmt=force"
This will be appended to the kickstart's bootloader --append argument.
Includes tests for modifying the bootloader line, the kickstart
template, and examining the final-kickstart.ks created for a compose.
- Check final-kickstart.ks for the rpm source
- Check final-kickstart.ks for the rpm package name and version
- Make sure depsolve works
- Make sure errors from a bad repo are returned correctly
- Make sure errors from a bad reference are returned correctly
This moves _wait_for_status into a helper function so it can be shared
between the test classes.
This hooks up creation of the rpm to the build, adds it to the
kickstart, and passes the url to Anaconda. The dnf repo with the rpms is
created under the results directory so it will be included when
downloading the build's results.
This adds support, documentation, and testing for a [[repos.git]]
blueprint section that can be used to install files from a git
repository. It will create an rpm that will be added to the build,
and included in the metadata that can be downloaded. This allows you to
accurately keep track of the source of configuration files and extra
metadata that is added to the build.
The source repo and reference will be listed in the rpm's summary making
it easy to discover on the installed system.
Use constants so we won't have to edit a dozen places in the test when
the package versions are bumped.
Also switch to using Fedora 31 GPG key now that it has branched for
Fedora 30.
Reading a blueprint wasn't checking to see if it had been deleted so it
was returning the most recent commit before it had been deleted. This
allowed things like starting a compose with a blueprint that technically
doesn't exist.
One exception to this is the /changes/ route, it must be available so
that you can use the commit hash to undo a delete.
This also adds tests for the various operations.
Resolves: rhbz#1682113
In order to support iso creation on multiple arches with the templates
we need to be able to select different packages based on arch.
lorax-composer uses the arch-specific Lorax templates in order to
generate the output iso so this patch:
1. Creates a new template and type to parse it, live-install.tmpl
which contains only installpkg commands and #if clauses for arch
2. Removes bootloader related packages from the live-iso.ks
3. Remove dracut-config-rescue exclusion because it can cause problems
with some blueprints.
4. Switch logo requirement to system-logos which is satisfied by
generic-logos or fedora-logos. This prevents conflicts when a blueprint
installs fedora-release-workstation.
So in the future, if x86.tmpl, etc. need a new package to support
creating the iso it should be added to the correct section in
./share/live/live-install.tmpl
reqpart can be used to make kickstarts more platform agnostic, creating
needed partitions without lmc having to keep track of the arch-specific
needs. eg. ppc64 needs prepboot and /boot
This increases the size of the disk based on whether reqpart or
reqpart --add-boot is in the kickstart.
Note that this is only valid for partitioned disk output types, not
for filesystem images or live iso output.
In some cases when the host has, for whatever reason, multiple copies of
the same repo listed the build may fail with an error about running out
of space.
So this commit removes duplicate entries after the host's repos have been
loaded. It also adjusts some of the test repos to use different
temporary repo names for the tests.
Support both
[customizations]
hostname = "whatever"
and
[[customizations]]
hostname = "whatever"
in the blueprint data. The [[ syntax matches the other customization
directives (user, group, sshkey), and as such it's easy to accidentally
use it for the hostname without even realizing it's specifying something
different.
Add some tests for converting customizations to kickstarts.
When the repository has multiple arches, eg. i686 and x86_64, it should
add a new entry to the project's builds list, not create a new project
in the list.
This handles that by adding a modified insort_left function and
examining the packages returned from dnf to make sure they aren't
already listed in the results. It also handles adding them in sorted
order so that no further sorting needs to be done on the results.
Resolves: rhbz#1656642
If the system ran out of space, or was rebooted unexpectedly, the state
of the queue symlinks, or the results STATUS files may be inconsistent.
This checks them and:
* Removes broken symlinks from queue/new and queue/run
* Removes symlinks from run and sets the build to FAILED
* Sets builds w/o a STATUS to FAILED
* Sets builds with STATUS of RUNNING to FAILED
* Creates missing queue/new symlinks to results with STATUS of WAITING
So, any builds that were running during the reboot will be FAILED, and
any that were waiting to be started will be started upon rebooting.
Resolves: rhbz#1647985
there's 7.2 in Fedora 29 (which we use in Jenkins) and 7.3 in
Rawhide which causes test jobs to fail with unsolved dependencies.
Alternatively we can switch to another recipe for cloud image tests.
Anaconda requires the root password to be set or locked, so if there
isn't anything setting it we write out 'rootpw --lock'
Also adds tests for this.
Resolves: rhbz#1626122
This tests to make sure that the metadata timer is working (by setting
it to 10s and adding a new package to the repo), and that
DNFLock.lock_check immediately picks up a new package.
This depends on rpmfluff which is available from Fedora or EPEL repos.
Related: rhbz#1631561
This differs from lmc's --make-ami in that creates a full disk image instead of
an fsimage. Create a raw disk image with a / and /boot partitions, and enable
sshd, chronyd, and cockpit by default.
Passing ?limit=0 to the blueprints/list, blueprints/changes,
projects/list, modules/list should always return the total possible
results, not 0.
Also move the composer-cli test_diff to the end so that it will work
consistently. Do this by naming it test_z_diff.
Note the exception string checking around compose_type. I didn't really
want to introduce a new exception type just for this, but also didn't
want to duplicate strings. I'd be open to other suggestions for how to
do this.
(cherry picked from commit b3bb438254)
This adds some fairly redundant code to the beginning of all the
blueprint routes to attempt reading a commit from git for the
blueprint's recipe. If it succeeds, the blueprint exists and the route
can continue. Otherwise, return an error. Hopefully this doesn't slow
things down too much.
(cherry picked from commit a925cc7ddb)
Note that this also changes the return type of uuid_info to return None
when an unknown ID is given. The other uuid_* functions are fine
because they are checked ahead of time.
(cherry picked from commit 6497b4fb65)
Make sure no UTF8 characters are allowed and return an error if they
are.
Also includes tests to make sure the correct error is returned.
(cherry picked from commit 86d79cd8a6)
Currently the code is not UTF8 safe, so we need to return a clear error
when invalid characters are passed in.
This also adds tests for the routes to confirm that an error is
correctly returned.
(cherry picked from commit 74f5def3d4)
This adds a new argument to projects_depsolve and
projects_depsolve_with_size that contains the group list, unfortunately.
I would have prefered adding a function that just returns a list of all
the contents of a group and then add that to what was being passed into
projects_depsolve. However, there does not appear to be any good way to
do that in yum aside from a lot of grubbing around in the comps object,
which I am unwilling to do.
(cherry picked from commit 5fe4b47072)
Depsolve the packages included in the templates and report any errors
using the /api/status 'msgs' field. This should help narrow down
problems with package sources not being setup correctly.
DNF Repo.dump() function cannot be used as a .repo file for dnf due to
it writing baseurl and gpgkey as a list instead of a string. Add a new
function to write this in the correct format, and limited to the fields
we use.
Add a test for the new function.
Fix /projects/source/info to return an error 400 if a nonexistant TOML
source is requested. If JSON is used the error is part of the standard
response.
Update test_server.py to check for the correct error code.
When adding a source failed it wasn't being removed from the dnf object.
This fixes that, and returns an error when setting up the source fails.
Also adds a test for it.
This also includes detecting rawhide vs. non-rawhide releases and
adjusting the tests accordingly (some of the source names change).
This adds support for the optional blueprint section [customizations].
Use it like this:
[customizations]
hostname = yourhostnamehere
[[customiations.sshkey]]
user = root
key = root user key
Change versions to match Fedora versions. Add version numbers to the
blueprints except for glusterfs.toml, not having a version is used as
part of the tests.
