Use constants so we won't have to edit a dozen places in the test when
the package versions are bumped.
Also switch to using Fedora 31 GPG key now that it has branched for
Fedora 30.
Reading a blueprint wasn't checking to see if it had been deleted so it
was returning the most recent commit before it had been deleted. This
allowed things like starting a compose with a blueprint that technically
doesn't exist.
One exception to this is the /changes/ route, it must be available so
that you can use the commit hash to undo a delete.
This also adds tests for the various operations.
Resolves: rhbz#1682113
In order to support iso creation on multiple arches with the templates
we need to be able to select different packages based on arch.
lorax-composer uses the arch-specific Lorax templates in order to
generate the output iso so this patch:
1. Creates a new template and type to parse it, live-install.tmpl
which contains only installpkg commands and #if clauses for arch
2. Removes bootloader related packages from the live-iso.ks
3. Remove dracut-config-rescue exclusion because it can cause problems
with some blueprints.
4. Switch logo requirement to system-logos which is satisfied by
generic-logos or fedora-logos. This prevents conflicts when a blueprint
installs fedora-release-workstation.
So in the future, if x86.tmpl, etc. need a new package to support
creating the iso it should be added to the correct section in
./share/live/live-install.tmpl
reqpart can be used to make kickstarts more platform agnostic, creating
needed partitions without lmc having to keep track of the arch-specific
needs. eg. ppc64 needs prepboot and /boot
This increases the size of the disk based on whether reqpart or
reqpart --add-boot is in the kickstart.
Note that this is only valid for partitioned disk output types, not
for filesystem images or live iso output.
- on some arches (also Fedora x86_64) systemd-nspawn may not be
available
- delete composes from other tests in rlPhaseStartCleanup because
we're seeing the tar compose kind of hanging in Jenkins and that
test script is executed last so the slave may be running out of
disk space. Be a good citizen and clean up after the previous
tests.
b/c we've migrated to Upshift we must use different instance type,
specify the desired network to connect to and update how we get
the ip address of the launched VM.
In some cases when the host has, for whatever reason, multiple copies of
the same repo listed the build may fail with an error about running out
of space.
So this commit removes duplicate entries after the host's repos have been
loaded. It also adjusts some of the test repos to use different
temporary repo names for the tests.
The OS_PROJECT_NAME (or OS_TENANT_NAME) environment variable needs to be defined.
Use the OS_PROJECT_NAME, since it is recommended in the documentation instead of
the older OS_TENANT_NAME.
Support both
[customizations]
hostname = "whatever"
and
[[customizations]]
hostname = "whatever"
in the blueprint data. The [[ syntax matches the other customization
directives (user, group, sshkey), and as such it's easy to accidentally
use it for the hostname without even realizing it's specifying something
different.
Add some tests for converting customizations to kickstarts.
When the repository has multiple arches, eg. i686 and x86_64, it should
add a new entry to the project's builds list, not create a new project
in the list.
This handles that by adding a modified insort_left function and
examining the packages returned from dnf to make sure they aren't
already listed in the results. It also handles adding them in sorted
order so that no further sorting needs to be done on the results.
Resolves: rhbz#1656642
If the system ran out of space, or was rebooted unexpectedly, the state
of the queue symlinks, or the results STATUS files may be inconsistent.
This checks them and:
* Removes broken symlinks from queue/new and queue/run
* Removes symlinks from run and sets the build to FAILED
* Sets builds w/o a STATUS to FAILED
* Sets builds with STATUS of RUNNING to FAILED
* Creates missing queue/new symlinks to results with STATUS of WAITING
So, any builds that were running during the reboot will be FAILED, and
any that were waiting to be started will be started upon rebooting.
Resolves: rhbz#1647985
there's 7.2 in Fedora 29 (which we use in Jenkins) and 7.3 in
Rawhide which causes test jobs to fail with unsolved dependencies.
Alternatively we can switch to another recipe for cloud image tests.
otherwise composer-cli is unable to glob() the kickstart
files and we're left without supported compose types. Seen
during AWS testing for example.
Helps with running some of the tests via sudo b/c this is
what Jenkins requires.
If trying to execute test_cli.sh inside a git checkout
we are going to get the following exception:
Traceback (most recent call last):
File "./src/sbin/lorax-composer", line 251, in <module>
repo = open_or_create_repo(server.config["REPO_DIR"])
File "/home/jenkins/lorax/src/pylorax/api/recipes.py", line 306, in open_or_create_repo
gi.repository.GLib.Error: ggit-error: failed to stat '/home/jenkins/lorax/tests/pylorax/blueprints': Permission denied (-1)
Error in atexit._run_exitfuncs:
Traceback (most recent call last):
File "/usr/lib64/python3.7/multiprocessing/popen_fork.py", line 54, in _send_signal
os.kill(self.pid, sig)
From what I can tell open_or_create_repo() is trying to initialize
a git repository inside the blueprints directory which fails when
we have an active git checkout.
This doesn't happen when we run the tests in Travis CI because
rsync excludes .git/ inside the Docker container.
these targets help hooking up things in Jenkins and enable us to
perform build & deploy tests for cloud images.
NOTE: use sudo -E to preserve the environment
It needs to be root in order to set the ownership and permissions on the
directories that are under /var/lib/lorax/composer/
Refactor the directory creation into a utility function, and use a umask
of 0o006 to ensure that the parent directories created do not have o+rw
set on them (makedirs behavior is different between Python 3.6 and 3.7
so umask of 0 doesn't work consistently).
composer-cli uses TOML for 'blueprints save' which was returning an
empty 200 response if the blueprint didn't exist. Change this to return
a standard 400 error response if the blueprint doesn't exist.
composer-cli is already setup to handle receiving json when an error is
returned so just the toml API response for `blueprints/save` needed to
be changed.
Anaconda requires the root password to be set or locked, so if there
isn't anything setting it we write out 'rootpw --lock'
Also adds tests for this.
Resolves: rhbz#1626122
Also kill the lorax-composer process and remove /run/weldr/api.socket
so that when this is run with podman you don't get an error about
attempting to tar up the socket.
This tests to make sure that the metadata timer is working (by setting
it to 10s and adding a new package to the repo), and that
DNFLock.lock_check immediately picks up a new package.
This depends on rpmfluff which is available from Fedora or EPEL repos.
Related: rhbz#1631561
This differs from lmc's --make-ami in that creates a full disk image instead of
an fsimage. Create a raw disk image with a / and /boot partitions, and enable
sshd, chronyd, and cockpit by default.
Remove `except` block which immediately raises the same exception again (it's
not a subclass of another caught exception, so this is safe).
Remove a false positive, because it is not emitted from the code base.
Disable subprocess-popen-preexec-fn in startProgram, which is not used
internally.
- need to specify --sharedir so lorax-composer can find its
kickstart files
- each test script writes results into a separate directory to
avoid a passing test overwriting the results from a failing one.
To avoid reporting failures in case of previously failing tests
(e.g. during development) remove the temporary directories holding
tets results before execution!
these are built on top of beakerlib and we use its internal
protocol to figure out the result without relying on the full
test runner that is tipically used inside of a RHEL environment!
Includes a disabled test snippet for Issue #460
Passing ?limit=0 to the blueprints/list, blueprints/changes,
projects/list, modules/list should always return the total possible
results, not 0.
Also move the composer-cli test_diff to the end so that it will work
consistently. Do this by naming it test_z_diff.
Note the exception string checking around compose_type. I didn't really
want to introduce a new exception type just for this, but also didn't
want to duplicate strings. I'd be open to other suggestions for how to
do this.
(cherry picked from commit b3bb438254)
This adds some fairly redundant code to the beginning of all the
blueprint routes to attempt reading a commit from git for the
blueprint's recipe. If it succeeds, the blueprint exists and the route
can continue. Otherwise, return an error. Hopefully this doesn't slow
things down too much.
(cherry picked from commit a925cc7ddb)
Note that this also changes the return type of uuid_info to return None
when an unknown ID is given. The other uuid_* functions are fine
because they are checked ahead of time.
(cherry picked from commit 6497b4fb65)
Make sure no UTF8 characters are allowed and return an error if they
are.
Also includes tests to make sure the correct error is returned.
(cherry picked from commit 86d79cd8a6)
Currently the code is not UTF8 safe, so we need to return a clear error
when invalid characters are passed in.
This also adds tests for the routes to confirm that an error is
correctly returned.
(cherry picked from commit 74f5def3d4)
These depend on there being a freshly installed lorax-composer API
server running, if there is no /run/weldr/api.socket they will be
skipped.
(cherry picked from commit 7700ae3135)
This adds empty __init__.py to tests so that a lib.py library of helper
functions can be imported from the tests.
Add captured_output to use with composer-cli tests to capture stdout/err
output from the functions.
(cherry picked from commit eeae331ba0)
Some results have errors and no status, others have status and errors.
Update the function to return the final rc to exit with, and a bool
indicating whether or not to continue processing the other fields.
Add a bunch of tests for the new function to make sure I have the logic
correct.
(cherry picked from commit 35fa067219)
This adds a new argument to projects_depsolve and
projects_depsolve_with_size that contains the group list, unfortunately.
I would have prefered adding a function that just returns a list of all
the contents of a group and then add that to what was being passed into
projects_depsolve. However, there does not appear to be any good way to
do that in yum aside from a lot of grubbing around in the comps object,
which I am unwilling to do.
(cherry picked from commit 5fe4b47072)
Depsolve the packages included in the templates and report any errors
using the /api/status 'msgs' field. This should help narrow down
problems with package sources not being setup correctly.
DNF Repo.dump() function cannot be used as a .repo file for dnf due to
it writing baseurl and gpgkey as a list instead of a string. Add a new
function to write this in the correct format, and limited to the fields
we use.
Add a test for the new function.
Fix /projects/source/info to return an error 400 if a nonexistant TOML
source is requested. If JSON is used the error is part of the standard
response.
Update test_server.py to check for the correct error code.
When adding a source failed it wasn't being removed from the dnf object.
This fixes that, and returns an error when setting up the source fails.
Also adds a test for it.
This also includes detecting rawhide vs. non-rawhide releases and
adjusting the tests accordingly (some of the source names change).
This adds support for the optional blueprint section [customizations].
Use it like this:
[customizations]
hostname = yourhostnamehere
[[customiations.sshkey]]
user = root
key = root user key
Change versions to match Fedora versions. Add version numbers to the
blueprints except for glusterfs.toml, not having a version is used as
part of the tests.
Fix up 2to3 complaints. I've decided to do with wrapping list
comprehension inside list() to get the generators to run in several
places instead of list(map( or list(filter( which seem less readable to
me.
