When multiple units are passed to systemctl and one fails it doesn't
finish the others. Change the template command to call systemctl for
each unit individually.
This also removes the lvm2-activation-generator in runtime-cleanup.tmpl
This will allow anaconda to fetch kickstarts using https when installing
with fips=1
Leave vmlinuz and .vmlinuz.hmac in /boot
dracut-fips module needs the vmlinuz.hmac file in order to boot.
It seems that on rare occasions losetup can return before the /dev/loopX
is ready for use, causing problems with mkfs. This tries to make sure
that the loop device really is associated with the backing file before
continuing.
NOTE that using losetup --list -O to return the backing store
associated with the loop device can fail due to losetup truncating
the output filename if sysfs isn't setup. Instead of printing the full
path it will truncate it to 64 characters with a * at the end.
See util-linux lib/loopdev.c for the code that does this.
Use the existing get_loop_name function, which uses losetup -j, to lookup
the loop device associated with the backing store which should work the
same, just in the opposite direction.
For historical reasons, lorax used the 'anaconda' package as a
touchstone to determine the architecture for the build. At some
point, this package became a metapackage that pulls in both the
GUI and headless installers.
In the modular world, it's possible that only the core and TUI bits
may be available for use. The only subpackage of anaconda that is
guaranteed to be on any viable system is anaconda-core, so let's
switch to using that for the touchstone instead of the metapackage.
Signed-off-by: Stephen Gallagher <sgallagh@redhat.com>
Also sort the expanded list of packages so that any failures will
be consistent instead of depending on the randomness of a set().
And add better logging when things fail.
The core issue is that repodata may have packages that match globs, but
they cannot actually be installed (eg. sigrok-firmware). This can cause
*some* of the globbed packages to be installed before hitting the
failure package.
With this change it will log the expanded list of packages if a glob is
used. It will skip any packages that fail to install when using
--optional with the glob, and continue to install the rest.
Related: rhbz#1440417
Previously lorax had no way to use repos with self-signed certificates.
This adds the --noverifyssl cmdline option which will ignore certificate
errors.
Resolves: rhbz#1430483
OSTree is a deduplicating hardlink store using a new file path
`/ostree`, which SELinux policy doesn't know about. However, OSTree
has SELinux support built in, and rpm-ostree (for example) uses this
to ensure the attributes on files stored there are simply always
correct. Relabeling it will corrupt it.
Hence, let's skip it.
Right now we dump all subprocess output to `program.log`. Unfortunately,
The pungi/koji stack doesn't know how to scrape out the lorax logs.
And even when running interactively, it's annoying that *some* fatal
errors show up on stderr, but if it's from a subprocess, I need to go
over and `tail program.log`.
Let's output the subprocess stderr directly, since the user is
going to want it prominently anyways.
anaconda-26.1 changed how package scriptlet failures are handled. They
are now fatal, and anaconda hangs after logging an Installation failure.
ERR packaging: Installation failed: PayloadInstallError('DNF error:
Non-fatal POSTIN scriptlet failure in rpm package mlocate',)
Catch this (the 'packaging: Installation failed' part) and terminate the
image creation.
This controls how big the root filesystem is for the squashfs used in
the boot.iso, the default is 2GiB.
Note that larger rootfs sizes will require more memory and may cause the
build to fail.
I'm working on
https://fedoraproject.org/wiki/Changes/WorkstationOstree and when
using lorax to make an installer ISO with content embedded, I run out
of disk space since the desktop+various apps is large.
Since this ends up being compressed anyways, let's just bump the
currently arbitrary `2` to `10` - the only real cost I can think of is
going to be a few more superblock entries.
If the query filter doesn't return anything it would just ignore the
install request instead of logging and raising an error when
required=True.
This checks for no packages matching, and if required is True raises an
error after all of the requested packages have been processed, instead
of after the first one to fail.
Previous versions of lorax assumed that installpkg was optional, and
would continue on if the PKGGLOB didn't match anything. But the majority
of the packages are required so this allows the boot.iso to be built
with missing packages that are hard to track down.
It makes more sense to make the PKGGLOB required and to flag the
few exceptions to this with --optional.
DNF doesn't want users to access base.logging anymore.
Lorax already takes over the "dnf" logger and directs it to ./dnf.log,
so it wasn't really being used.
This raises the debug level to DNF's custom DDEBUG, and sets it up so
that dnf.librepo.log and hawkey.log are next to dnf.log
Before attempting to cleanup any dangling anaconda mounts copy the
anaconda logs to their final location.
Also, catch failures to cleanup the mounts, log it, and continue trying
the other mountpoints. A cleanup failure will result in an InstallError
instead of a CalledProcessError.
Fedora now has a edk2 package so use the OVMF code from there. This also
adds using a copy of OVMF_VARS for each boot instead of reusing the one
provided by the package.
In some cases the initramfs may not be present in /boot to save space.
Use it if present, otherwise use the kernel version to recreate the name
of it.
This also fixes problems with dracut running out of space when not using
--live-rootfs-keep-size
There's no reason to require the initramfs when we can rebuild it using
the version from the kernel. This adds handling of missing initramfs so
that lmc kickstarts can remove it from the squashfs, saving about 40M on
the iso.
This makes sure the contents of /boot are at the expected locations in
/boot and in sys_root. For partitioned images it mounts the separate
/boot partition on /boot. For both fsimage and partitioned images ir
binf mounts it to sys_root so that the kernel+initrd can be found.
The boot directory isn't always named boot.0, so wildcard it and let the
count check handle failure if there is more than 1.
umount tries to delete a mountpoint if it has lorax.imgutils in the
path. This doesn't work right if you try to umount something mounted
deeper on the path.
This adds a delete option, which is True by default, to skip the delete.
If an anaconda no-virt run crashes it can leave things mounted under
/mnt/sysimage. Previously anaconda-cleanup was used to handle this, but
it will also try to cleanup host mountpoints which isn't desired.
When using the template install command copying the same file to itself
shouldn't crash. Just log the error and continue.
Also copy the s390 configuration files for use with livemedia-creator
Resolves: rhbz#1269213
When an image name hasn't been passed, and the compression type is
something other than xz, the default image name should use the user
specified compression suffix.
Resolves: rhbz#1318958
Some cases of mksquashfs were not using -Xbcj when it is available for
the arch. This adds a function to return the correct args based on the
arch and the cmdline args.
Allow the template to select a different compression type or arguments
for the installimg command.
On 32bit builds running inside a mock xz sees the full amount of system
memory which can result in xz failing with a memory error. This allows
the template to limit the amount of memory it tries to use.
lmc --no-virt was switching selinux to permissive if it was enforcing
and restore it when done. This works fine when it is the only session
running, but would cause problems if it was run in parallel.
It now only checks the state and exits with an error if it isn't already
disabled or in Permissive mode.
Users will need to run setenforce 0 before running lmc.
If there isn't enough space for DNF to download packages it will log:
"Not enough disk space to download the packages."
So add this to the messages in monitor that trigger an error.
This makes package selection a little more roundabout, but it allows for
unused packages (and their dependencies) to be removed from globs during
the install phase.
dnf.subject.Subject is the class used by dnf's Base.install to select
packages, so the behavior of installpkg without --except options is the
same as it was before.
commit 4699c88109 changed how the disk
size is estimated and not all users took into account that the return
value is in MiB.
This would result in qemu based iso installations having a rootfs.img
that was 1024x too large.
Something is causing problems with the ext4 rootfs.img when running with
no-virt inside koji. This results in a failed image that looks good
until you try to boot it.
make_squashfs will now return False if it fails, and make_live_image
will return None (instead of the result path). lmc will exit with a 1
and log an error.
When using no-virt the runtime filesystem size comes from the kickstart.
For virt installs lmc was creating a runtime filesystem that was just
slightly larger than the space used by the files installed by anaconda.
This can run into problems with larger filesystem. It is also
inconsistent behavior between virt and no-virt installations.
With this commit the virt runtime filesystem will also come from the
kickstart.
Switching to using qemu directly allows lmc to be more flexible. It can
now run from inside a mock chroot for creation of all image types,
inculding disk images, and can take advantage of KVM on the host system
if /dev/kvm device is present inside the mock.
It should also be possible to create cross-arch images, but without kvm
available this is likely to be a very slow option.
When running a no-virt installation it was parsing the kickstart url
method and passing it to anaconda using --repo which prevents it from
working with url --mirrorlist method. There is no good reason to do
this, anaconda gets the method directly from the kickstart when it isn't
on the cmdline.
This allows lorax to support multiple templates.
If there is no templates.d under the sharedir (/usr/share/lorax or the
directory passed by --sharedir) then the templates in that directory
will be used as they were previously.
If there are directories under templates.d the first one will be used,
unless --sharedir points to a specific one.
Use 4k blocks for the ext4 filesystem. Run fsck on the filesystem to
make sure deleted blocks are actually zeroed, and pass -Xbcj to
mksquashfs.
4k blocks and -Xbcj decreases the size by 2-6% depending on the
filesystem size. Zeroing the blocks of the ext4 fs improves things
dramatically. The problem is that DNF downloads the rpms before
installing them. In addition to forcing us to use a larger filesystem
than we would like it leaves data that is difficult to compress on the
image. The downloaded files are removed, but need to be zeroed out so
that mksquashfs can compress it.
Instead of reusing --image-name add a new argument to name the iso. This
way the disk image can be given a unique name with --image-name and the
iso can be named something different.
This option removes all the extra build artifacts from --make-iso,
leaving only the boot.iso
It also supports naming of the final iso with --image-name
If the kickstart includes multiple definitions for the same mount point,
the last one defined is used. The current code includes all of them in
size calculation, and the image file that livemedia-creator makes is big
enough to hold all of the partitions, even though the duplicates are
ignored by Anaconda.
Also alias --qcow2 to --image-type=qcow2
This allows --make-disk to be used to create any disk image that
qemu-img supports, not just raw or qcow2. See qemu-img --help for a list
of the supported image types.
Sometimes debugging a boot.iso requires using gdb, and finding the
corresponding debuginfo packages can be difficult. This writes the
matching -debuginfo package names and full ENVR to a file on the iso.
This can then be fed to dnf to install the correct debug packages.
Because livemedia-creator is using a media based installation by default,
no networking is brought up automatically. If then the url installation
method is used, it fails with an unclear reason.
This patch adds a check to raise a clear error if the url installation
method is used insisde the kickstart but no networking is configured.
Signed-off-by: Fabian Deutsch <fabiand@fedoraproject.org>
This could help to keep the disk size down during installation,
if the FS within the VM is also supporting TRIM.
Signed-off-by: Fabian Deutsch <fabiand@fedoraproject.org>
This adds the --repo command which can be added multiple times to point
to dnf .repo files.
--enablerepo and --disablerepo can be used multiple times to control
which repos from the .repo files are actually used for the boot.iso
creation.
--repo can be used instead of --source, or in addition to it.
This requires OVMF to be setup on the system, and for the kickstart to
create a /boot/efi/ partition. You can then use it to create UEFI
bootable partitioned disk images.
Make the metavars useful, not STRING. Simplify some of the error
checking, let the parser handle it. Add type=os.path.abspath to several
path arguments so that relative paths will be converted to absolute
paths when they are processed.
One of the most useful things to override is the path to the templates,
this adds a cmdline option to do that instead of needing to create a
whole configuration file and pass it.
This adds support for creating Vagrant boxes using virt-install. It also
includes an example kickstart that sets up the vagrant user with the
default ssh key.
The default result, without passing --image-name, is in
/var/tmp/vagrant.tar.xz
Sometimes you don't want to include the selinux xattrs in the tar (eg.
bsdtar has problems extracting them). They are still included by
default, but pass selinux=False to remove '--selinux --acls --xattrs'
from the tar cmdline.
This implements the bundle spec from:
https://github.com/opencontainers/specs
It creates a tar with the filesystem under /rootfs/ and includes user
provided config.json and runtime.json files.
This allows the partition to be mounted on a directory underneath the
temporary directory, eg. /rootfs/, to help support creating other image
types without needed to move the files around.
The size estimate was counting the /EFI/BOOT/ contents twice and then
doubling that. Only count things once, then double it for the
System/Library/CoreServices/ copy.
hard-links don't work. With CoreServices hardlinked to /EFI/BOOT/ the
Mac won't boot. With /EFI/BOOT/ hardlinked to CoreServices grub2 cannot
read the config file so there are 2 real copies.
This reduces the image size from 21M to about 12M
When running the transaction in a separate process it crashes if you use
a https repo source. There's really no need for threads or processes in
lorax so drop it.
Also switched to using the DNF TransactionProgress API for progress
reporting.
The system the image boots on will likely not match the host where lorax
was run, and in some cases this can cause systems to hang.
Resolves: rhbz#1258498
