The directory where the --logfile is located is also used for other log
files and for the anaconda logs when using --no-virt. Create the parent
directories if they don't exist.
--make-pxe-live target generate live squashfs and initrd for pxe boot.
Also generates pxe config template.
--make-ostree-live is used for installations of Atomic Host. Additionally to
--make-pxe-live it ensures using deployment root instead of physical root of
installed disk image where needed. Atomic installation needs to be virt
installation with /boot on separate partition (the only way supported by
Anaconda currently). Content of boot partition is added to live root fs so that
ostree can find deployment by boot configuration.
Previously if there was an error during a novirt installation that
didn't exit the process there was no way to detect it. This uses the new
--remotelog option for anaconda to monitor the logs for errors using the
same criteria as it does when monitoring a virt install. If there is an
error the anaconda process will be terminated and the logs will be
gathered up into ./anaconda/
Recently, Fedora has been trying to do a 3 product split. As part of
that, lorax was changed to do "installpkg lorax-product-*" via
provides.
I think that approach is awkward; a much simpler approach is to simply
specify the product package as input to lorax on the command line, via
external rel-eng scripts.
This patch therefore adds --includepkg (and we should probably add an
option to remove the implicit lorax-product-* glob).
The aarch64 change to use shim (6907567) also stopped using mixed-case
names for BOOT${efiarch}.efi (so it's always .EFI and ${efiarch} is X64
IA32 AA64 etc. now), and mkefiboot needs to match that.
Related: rhbz#1043274
Related: rhbz#1100048
The ppc config files were missing from the live config_files directory
and ppc needs the correct lib directory so lmc has been switched to use
ArchData driven from the installed kernel arch.
Resolves: rhbz#1102318
(cherry picked from commit 59f256e989)
When using GPT it reserves a few more sectors at the end of the disk for
the copy of the GPT so pad the size of the partitions in the kickstart
by 2MiB instead of 1MiB to account for this.
Depending on the environment that --no-virt is run inside the resulting
filesystem may need to have the SELinux labels updates. Run setfiles on
the new filesystem after the anaconda run has finished.
eg. when run from inside mock the labels will be incorrect.
This no longer seems to be needed, and causes images created without
passing --vnc vnc to start up with a serial console. If you need a
serial console you can pass it using --kernel-args
Add check for running traceback script and when the retry fails.
This also indicates something went wrong with the installation, exit
when they are seen in the logs.
Also drop looking for WARNING in the regex errors, they will be errors
after the syslog level name remap patch goes into anaconda.
Spaces cause various bugs like #923374 and #855849 , and it would be
better if we just didn't use them.
Note that there's a corresponding pungi change to go with this.
Signed-off-by: Peter Jones <pjones@redhat.com>
Watch the logs for WARNING packaging: .* requires .* which indicates
that there are missing packages and it is sitting at a prompt waiting
for user input.
What I need is to make something like the traditional DVD which also
includes packages. At present this is apparently handled by the
entirely separate pungi tool.
At the moment for me, it's the least bad option to modify lorax to
inject data from an external source than to create a new tool, or
attempt to also modify pungi to do this.
This would also allow pungi's DVD creation to eventually be a set of
external templates for Lorax.
If the user supplies a fsimage to use for the iso it may not be on the
same filesystem as the working directory. Try to hardlink first, but if
that fails copy the image.
This adds the --make-tar option which will produce a xz compressed tar
of the root filesystem. This works with either virt-install or no-virt
modes. Use --image-name to set the output filename.
--compression is used to set the compression type to use, which defaults
to xz. Supported types are xz, lzma, gzip and bzip2.
--compress-arg is used to pass arguments to the compression utility.
--make-fsimage was only working with --no-virt, this re-structures
things so that virt-install partitioned disk images can be converted to
a fsimage. --make-ami was actually already doing this, so change it to
use --make-fsimage and set the default image name to "ami-root.img" with
a label of "AMI".
This also adds the ability to set the fs label on iso fsimage and
fsimages created with --make-fsimage and --make-ami by passing
--fs-label, but note that bootable iso's expect the Anaconda label.
When doing an image install there is no .buildstamp file to pull the
information from so use the cmdline variables (or their defaults) and
pass them to anaconda in the environment.
Resolves: rhbz#1067746
Also adds a check for a bad url repo, and fix ram calculation for
appliance mode. Updates the README.livemedia-creator documentation.
Resolves: rhbz#1019728
Fix "lorax -V" and add a "version is ???" to the log file so we can easily know
what version of lorax is used to build an iso.
Changed to try/import for versioning because the version file is autogenerated.
This adds support for installing to a filesystem image instead of a
partitioned disk image. It requires Anaconda's --dirinstall support.
Also re-organized the code to break it up into smaller methods.
This speeds up iso creation in no-virt mode by removing the need to copy
the filesystem from the partitioned disk image to the filesystem image
that is used to make the squashfs image.
--location specifies an iso directory tree to be used by virt-install
instead of the iso. This allows you to update the initrd in the tree for
debugging.
virt-install uses the images/pxeboot/ directory for initrd.img and
vmlinux.
An iso is still required for the LiveOS/squashfs.img stage2 file.
live media isn't exactly the same as the Anaconda install media. Right
now this amounts to needing a root= cmdline argument but in the future
there may be other differences.
This also reverts 5437557846 on the new copies of the templates.
Switch to using execWith* so that the command and its output can be
logged. To capture the output setup a logger named "program"
livemedia-creator captures all of this into program.log
- Add a check to livemedia-creator for /usr/bin/virt-install (#841566)
- Suggest the correct package for livemedia-creator's libvirt (#841552)
- Add to list of packages needed to build a livemedia-creator iso (#841594)
From Harald Hoyer <harald@redhat.com>:
pollcdrom is used to poll for the install medium. A lot of CDROM drives
are not polled by the kernel correctly, so we have to actively poll for
the medium.
This adds support for creating an appliance description file for the
disk image. Mako templates are used to make it easy to support other
appliance targets. The included example works with virt-image.
When running with no-virt mode libvirt and virt-install are not needed
so make the import optional and update the usage info reflect that the
virt options are disabled.
There's a small amount of additional metadata required for the Mac boot
images to appear as bootable devices in the startup preferencs, so add
support for generating that.
Signed-off-by: Brian C. Lane <bcl@redhat.com>
AMI images are un-partitioned filesystem images with a grub.conf that
is read by the pv-grub bootloader used by EC2. Most of the actual work
making the AMI is done in the kickstart. This just creates the image
file.
Fedora 17 changes top level directories like /bin, /lib, etc. to
symlinks to the corresponding dirs in /usr/
dracut can convert old systems to the new layout using its convertfs
module.
In the latest method for booting the rootfs is in the LiveOS
directory of the media, not appended to the initrd. Detect this
and mount the iso and pass the CDLABEL to virt-install.
Some repos may contain anaconda packages for more architectures,
so it's not possible to get the right buildarch.
This patch allows optional specifying of the buildarch on the
command line when running lorax.
If the buildarch is not specified manually, lorax tries to get
it from the anaconda package as before.
If there's no anaconda package in the repository, don't fallback
to the system architecture and continue, because this is pointless.
We need the anaconda package.
This runs anaconda directly, using the --image install feature. The host
system should be the same release as the target system in order to avoid
unexpected problems.
livemedia-creator uses an anaconda install media iso to install to a
file image. virt-install is used to execute the kickstart. lorax is used
to post-process the image file and create a bootable .iso from it.
Future additions will allow creation of EC2 images and output xml
details about the install.
This adds the new "mkefiboot" cmd, which creates an efiboot img in the
magical way that EFI requires. There doesn't seem to be a good tool for
this (unlike the existing tools for all the other weirdo boot image
types) so it was necessary to create one.
