Commit Graph

2124 Commits

Author SHA1 Message Date
Brian C. Lane
ca2c3d9e77 Make sure cancel_func is not None 2019-01-07 13:53:44 -08:00
Dan Horák
3817671587 drop ppc/ppc64 from tests 2019-01-07 13:52:46 -08:00
Dan Horák
f9de60b2b7 drop ppc/ppc64 from spec 2019-01-07 13:52:46 -08:00
Dan Horák
e939469524 all supported arches have docker 2019-01-07 13:52:46 -08:00
Dan Horák
a477db33d6 drop big endian ppc/ppc64 support 2019-01-07 13:52:46 -08:00
Dan Horák
34ab13b68a add qemu command mapping for ppc64le 2019-01-07 13:52:46 -08:00
Dan Horák
d34acfc14c don't reduce initrd size on ppc64/ppc64le 2019-01-07 13:52:46 -08:00
Dan Horák
3625e8e27c fbset has been retired 2019-01-07 13:52:46 -08:00
Brian C. Lane
fd173f7265 Add timestamps to program.log and dnf.log
In lorax, lorax-composer, and livemedia-creator.
2018-12-19 12:13:24 -08:00
Brian C. Lane
3d1d79eea5 Automatic commit of package [lorax] release [30.9-1].
Created by command:

/bin/tito tag
2018-12-17 16:42:57 -08:00
Brian C. Lane
6f141658d4 lorax: Save information about rootfs filesystem size and usage
Run df on the filesystem image after it has been created.
Output will be in program.log, eg:

Running... df /var/tmp/lorax.imgutils.wm04pg_v
Filesystem     1K-blocks    Used Available Use% Mounted on
/dev/loop0       1998672 1619508    362780  82% /var/tmp/lorax.imgutils.wm04pg_v
Return code: 0
2018-12-17 16:24:23 -08:00
Brian C. Lane
fee5d4594c Turn on signed tags when using tito.
This requires a patched version of tito at the moment, and doesn't hurt
to have it set -- it will just continue not signing the tags.
2018-12-17 16:23:25 -08:00
Brian C. Lane
6b5c4df8b5 lorax-composer: Cancel running Anaconda process
It ends up that this isn't as easy as you'd think. Anaconda sets up some
signal handlers to handle cleanly exiting, but they are not being run
when sent a TERM after package installation has started. I think DNF
resets them causing it to get ignored.

When the cancel is sent it can take several minutes for it to have an
effect. In my testing it usually takes around 2 minutes for anaconda to
notice and exit.

This sends a TERM to the process and then waits for it to exit. When it
returns it then removed any device-mapper devices that were setup for
image installations, removes any hanging loop devices.

It then kills off any process with pyanaconda. in the cmdline, and
anaconda-bus.conf (because anaconda starts a bunch of helpers and if it
doesn't shut down cleanly they remain running).

Resolves: rhbz#1656691
2018-12-17 16:10:04 -08:00
Brian C. Lane
26a684932b Add cancel_func to virt and novirt_install functions
In addition to monitoring the logs for errors, call a function (or
functions) that tell it to cancel the anaconda process and cleanup.

Also check for a cancel after creating the squashfs image for live-iso
since that's a long running process.

This required adding a new argument to a number of existing functions,
passing it down to QEMUInstall and novirt_install where the function is
called.

Resolves: rhbz#1656691
2018-12-17 16:10:04 -08:00
Brian C. Lane
3762264f56 lorax-composer: Check for STATUS before deleting
When there is no run or new symlink do one last check to make sure no
STATUS file was written. If it is missing, go ahead and remove the
results directory.

Related: rhbz#1656691
2018-12-17 16:10:04 -08:00
Brian C. Lane
fa461dc837 Check for existing CANCEL request, and exit on FINISHED
If another CANCEL request has already been made just exit from
uuid_cancel. If the build is FINISHED before it times out just exit,
don't remove the finished results.

Related: rhbz#1656691
2018-12-17 16:10:04 -08:00
Alexander Todorov
883a959442 tests: use the first IP address if more than 1 retruned from OpenStack 2018-12-08 02:31:06 +02:00
Alexander Todorov
6563a33f63 tests: remove a debugging command 2018-12-08 02:31:06 +02:00
David Shea
d619430d6d Add openstack to the image type list in the docs 2018-12-07 15:11:27 -05:00
Brian C. Lane
6524bb0985 Automatic commit of package [lorax] release [30.8-1].
Created by command:

/bin/tito tag
2018-12-06 16:09:24 -08:00
Brian C. Lane
d18934775c lorax-composer: Handle packages with multiple builds
When the repository has multiple arches, eg. i686 and x86_64, it should
add a new entry to the project's builds list, not create a new project
in the list.

This handles that by adding a modified insort_left function and
examining the packages returned from dnf to make sure they aren't
already listed in the results. It also handles adding them in sorted
order so that no further sorting needs to be done on the results.

Resolves: rhbz#1656642
2018-12-06 15:48:58 -08:00
Brian C. Lane
4dd9004d13 lorax-composer: Check the queue and results at startup
If the system ran out of space, or was rebooted unexpectedly, the state
of the queue symlinks, or the results STATUS files may be inconsistent.
This checks them and:
 * Removes broken symlinks from queue/new and queue/run
 * Removes symlinks from run and sets the build to FAILED
 * Sets builds w/o a STATUS to FAILED
 * Sets builds with STATUS of RUNNING to FAILED
 * Creates missing queue/new symlinks to results with STATUS of WAITING

So, any builds that were running during the reboot will be FAILED, and
any that were waiting to be started will be started upon rebooting.

Resolves: rhbz#1647985
2018-12-06 15:13:28 -08:00
Alexander Todorov
642b909d24 Teach OpenStack test to distinguish between RHEL and Fedora 2018-12-06 22:15:49 +02:00
Alexander Todorov
543a4d88d9 Use full path for Azure playbook as well 2018-12-06 22:15:49 +02:00
Alexander Todorov
16260c1569 Use a temporary dir for ssh keys during testing
resolves path problems with sudo, we already have the same change
in the AWS test script.
2018-12-06 22:15:49 +02:00
Alexander Todorov
59050df710 Update V_DATASTORE b/c defaults appear to have been changed 2018-12-06 22:15:49 +02:00
Alexander Todorov
e0c8cdc5a8 Clone pyvmomi samples in the correct directory 2018-12-06 22:15:49 +02:00
Alexander Todorov
8f430be2a6 Use full path when pushing toml files during testing 2018-12-06 22:15:49 +02:00
Alexander Todorov
57b4f2e8f3 Add empty ci_after_success target for Jenkins
Jenkins uses templates to define all jobs which means they need to
have the same make targets even if the targets don't do anything.
2018-12-03 11:36:29 +02:00
Alexander Todorov
4b4f4bd0e0 Implicitly specify ssh key directory/files for testing
this is to work around identity/sudo problems
2018-12-03 11:36:29 +02:00
Alexander Todorov
ed63611cb7 [test] Clean up containers.json 2018-12-03 11:36:29 +02:00
Alexander Todorov
ab048947cb Teach AWS test to distinguish between RHEL and Fedora 2018-12-01 18:06:20 +02:00
Brian C. Lane
14ae0fcac9 Automatic commit of package [lorax] release [30.7-1].
Created by command:

/bin/tito tag
2018-11-29 13:55:49 -08:00
Brian C. Lane
9ac4508135 lorax-composer: Install selinux-policy-targeted in images
This is required to ensure that SELinux is configured properly while
building. It fixes the problem with building tar, and should be
installed in the other image types for consistency.

Resolves: rhbz#1645189
2018-11-29 11:06:27 -08:00
Brian C. Lane
8b11705ea0 Remove setfiles from mkrootfsimage
SELinux applies the correct labels, setfiles is no longer needed.
This allows lorax to run with SELinux in Enforcing mode.
2018-11-29 11:06:27 -08:00
Brian C. Lane
9ea1f4c09d New lorax documentation - 30.7 2018-11-29 11:06:27 -08:00
Brian C. Lane
35b8957f12 Remove SELinux Permissive checks
Anaconda, Lorax, lorax-composer, and livemedia-creator can all now run
with SELinux in Enforcing mode. It does not need to be disabled and if
there are denials they should be reported as a bug.

Log the current state of SELinux when starting, update the
documentation.
2018-11-29 11:06:26 -08:00
Alexander Todorov
cd6f4fdb67 Drop minor version from php package in blueprint
there's 7.2 in Fedora 29 (which we use in Jenkins) and 7.3 in
Rawhide which causes test jobs to fail with unsolved dependencies.
Alternatively we can switch to another recipe for cloud image tests.
2018-11-29 09:46:06 +02:00
Alexander Todorov
b88466fd74 Use a temporary shared dir when testing
otherwise composer-cli is unable to glob() the kickstart
files and we're left without supported compose types. Seen
during AWS testing for example.

Helps with running some of the tests via sudo b/c this is
what Jenkins requires.
2018-11-29 09:46:06 +02:00
Alexander Todorov
c9d706a382 Copy blueprints used for testing to temporary directory
If trying to execute test_cli.sh inside a git checkout
we are going to get the following exception:

Traceback (most recent call last):
  File "./src/sbin/lorax-composer", line 251, in <module>
    repo = open_or_create_repo(server.config["REPO_DIR"])
  File "/home/jenkins/lorax/src/pylorax/api/recipes.py", line 306, in open_or_create_repo
gi.repository.GLib.Error: ggit-error: failed to stat '/home/jenkins/lorax/tests/pylorax/blueprints': Permission denied (-1)
Error in atexit._run_exitfuncs:
Traceback (most recent call last):
  File "/usr/lib64/python3.7/multiprocessing/popen_fork.py", line 54, in _send_signal
    os.kill(self.pid, sig)

From what I can tell open_or_create_repo() is trying to initialize
a git repository inside the blueprints directory which fails when
we have an active git checkout.

This doesn't happen when we run the tests in Travis CI because
rsync excludes .git/ inside the Docker container.
2018-11-29 09:46:06 +02:00
Alexander Todorov
366ae55abe Add make targets for Jenkins
these targets help hooking up things in Jenkins and enable us to
perform build & deploy tests for cloud images.

NOTE: use sudo -E to preserve the environment
2018-11-29 09:46:06 +02:00
Brian C. Lane
c11bffc357 Add --no-system-repos to lorax-composer
Running lorax-composer --no-system-repos will prevent it from copying
the dnf repositories from /etc/yum.repos.d/ into the lorax-composer repo
directory. It will *only* use repositories setup using the sources api
or written to /var/lib/lorax/composer/repos.d/

If lorax-composer has previously been run without this switch the system
repos will need to be removed from the composer/repos.d/ directory. It
would also be a good idea to remove the cached metadata in
/var/tmp/composer/

Resolves: rhbz#1650363
2018-11-26 17:05:08 -08:00
Javier Martinez Canillas
763ca83f9f Install grubby-deprecated package for ARMv7
Most bootloaders used in Fedora already have BootLoaderSpec but extlinux
doesn't yet. So when using extlinux the old grubby must to be installed.

Resolves: rhbz#1649778

Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
2018-11-26 10:06:00 -08:00
Alexander Todorov
af2ae790ce Teach test_cli.sh to execute test scripts via arguments
this will be used to invoke scripts that build/push cloud images
without having to duplicate the setup/teardown/report parts!
2018-11-26 14:22:43 +02:00
Alexander Todorov
13fbd0861b new test: build an image and deploy it on Azure 2018-11-21 11:39:15 +02:00
Alexander Todorov
d6dcb38a78 Fix typo in comment 2018-11-21 11:39:15 +02:00
Brian C. Lane
b61a91954a Fix reporting of coverage results to coverall.io
When I re-arranged the test-in-docker I didn't realize how .travis.yml
was extracting the results. This should fix it.

When running with test-in-docker we mount the source read-only on
/linux-ro/ inside the container and copy it over to /lorax/ for running
the tests.

The local directory ./.test-results/ is mounted on /test-results/ in the
container and the .coverage file is copied into there so that it is
available on the host.
2018-11-14 09:11:03 -08:00
Alexander Todorov
6ae78fbd47 For OpenStack build image with rng-tools installed
appears to be a decent workaround for slow boot likely caused
by lack of entropy for ssh-keygen, see:
https://bugzilla.redhat.com/show_bug.cgi?id=1639326
2018-11-13 12:09:07 +02:00
Brian C. Lane
fb4e6f2588 Add tests for partitioned disk images
The setup for this is a bit complex, so it really ends up testing things
twice.
2018-11-12 11:13:37 -08:00
Brian C. Lane
d69f01d4a8 Create a kpartx_disk_img function
So that it can be used in tests as well as in imgutils
2018-11-12 11:13:37 -08:00