Previously the release package was chosen by picking the first package
that provides 'system-release' that isn't named generic. This can cause
branding issues with repos containing multiple system-release packages.
This patch changes _install_branding so that it will give preference to
a system-release package that ends with lowercase --variant name. If
there isn't one it will fall back to the previous behavior.
Resolves: rhbz#1826479
When the timeout is too short the http library sends the request again.
We return the last response to the user so even if the cancel works they
get an error about the UUID not being valid.
Resolves: rhbz#1788461
The enabled bool is now being used so the cli should only show the types
actually available on the architecture.
Also modifies the test in test_compose_sanity.sh
Related: rhbz#1751998
The callers, and the documentation, all expect int 0/1 to use as the
exit status for the program. Not True/False, even though that works most
of the time.
(cherry picked from commit fad9b324f7)
Related: rhbz#1779301
This adds the ability to execute API v1 commands when the backend server
supports them. It detects the API version supported by the server and
adjusts the available commands accordingly.
Resolves: rhbz#1779301
This makes sure that required fields are included, and that sections are
not empty. It does not check for all optional fields.
If there are errors it will gather up all of them and then raise a
RecipeError with a string of all the errors.
(cherry picked from commit 61059a2699)
Resolves: rhbz#1716596
The 'enabled' field in the /compose/types output now reflects whether or
not the type is supported on the current architecture. Disabled types
are not allowed to be built, and will raise an error like:
Compose type 'alibaba' is disabled on this architecture
Resolves: rhbz#1751998
rpmfluff was including / in the rpm, which conflicts with
filesystem.rpm
The rpm globs are pretty limited, and we don't actually know the file
paths until later, so we have to use a glob or a directory.
So when the destination is / it now uses /* to select all the files and
sub-directories in the archive. The limitation of this is that it cannot
support dotfiles directly under /, they will cause a rpmbuild error.
For destinations other than / it uses the name of the directory, so
dotfiles are fine in that situation.
(cherry picked from commit 049f68cb60)
Related: rhbz#1709594
This hooks up creation of the rpm to the build, adds it to the
kickstart, and passes the url to Anaconda. The dnf repo with the rpms is
created under the results directory so it will be included when
downloading the build's results.
(cherry picked from commit cd8c884adb)
Related: rhbz#1709594
This handles creating the rpm from the dictionary describing the
repository and rpm. Also adds tests for archive and rpm creation.
(cherry picked from commit f6f2308765)
Related: rhbz#1709594
This adds support, documentation, and testing for a [[repos.git]]
blueprint section that can be used to install files from a git
repository. It will create an rpm that will be added to the build,
and included in the metadata that can be downloaded. This allows you to
accurately keep track of the source of configuration files and extra
metadata that is added to the build.
The source repo and reference will be listed in the rpm's summary making
it easy to discover on the installed system.
(cherry picked from commit d7b96c8f0f)
Resolves: rhbz#1709594
composer-cli will now output information about changes to customizations
entries and the repos.git entries.
(cherry picked from commit 156ef0acfd)
Related: rhbz#1709595
This also includes extensive tests for each of the currently supported
customizations. It should be generic enough to continue working as long
as the list of dicts includes a 'name' or 'user' field in the dict.
Otherwise support for a new dict key will need to be added to the
customizations_diff function.
(cherry picked from commit 850c490b6e)
Related: rhbz#1709595
To maintain consistency with the other options this changes firewall to
combine the existing settings from the image template with the settings
from the blueprint.
Also updated the docs, added a new test for it, and sorted the output
for consistency.
(cherry picked from commit 3e08389a0f)
Resolves: rhbz#1709595
Add support for enabling and disabling systemd services in the
blueprint. It works like this:
[customizations.services]
enabled = ["sshd", "cockpit.socket", "httpd"]
disabled = ["postfix", "telnetd"]
They are *added* to any existing settings in the kickstart templates.
(cherry picked from commit 1111aee92d)
Related: rhbz#1709595
You can now open ports in the firewall, using port numbers or service
names:
[customizations.firewall]
ports = ["22:tcp", "80:tcp", "imap:tcp", "53:tcp", "53:udp"]
Or enable/disable services registered with firewalld:
[customizations.firewall.services]
enabled = ["ftp", "ntp", "dhcp"]
disabled = ["telnet"]
If the template contains firewall --disabled it cannot be overridden,
under the assumption that it is required for the image to boot in the
selected environment.
(cherry picked from commit 4d35668ab5)
Related: rhbz#1709595
You can now set the keyboard layout and language. Eg.
[customizations.locale]
languages = ["en_CA.utf8", "en_HK.utf8"]
keyboard = "de (dvorak)"
Existing entries in the kickstart templates are replaced with the new
ones. If there are no entries then it will default to 'keyboard us' and
'lang en_US.UTF-8'
Includes tests, and leaves the existing keyboard and lang entries in the
templates with a note that they can be replaced by the blueprint.
(cherry picked from commit e5a8700bdf)
Related: rhbz#1709595
This fixes the customizations list problem earlier than in
add_customizations.
In the recipe it should be [customizations] not [[customizations]]
which creates a list. If it was used that way grab the first element and
replace the list with it.
(cherry picked from commit 67007dfa60)
Related: rhbz#1709595
For example:
[customizations.timezone]
timezone = "US/Samoa"
ntpservers = ["0.pool.ntp.org"]
Also includes tests.
This removes the timezone kickstart command from all of the templates
except for google.ks which needs to set it's own ntp servers and timezone.
If timezone isn't included in the blueprint, and it is not already in a
template, it will be set to 'timezone UTC' by default.
If timezone is set in a template it is left as-is, under the assumption
that the image type requires it to boot correctly.
(cherry picked from commit 9bdbb29662)
Related: rhbz#1709595
You would need to run reset to regain control of your terminal after
this happened, so this turns off the monitor and serial port mux to
stdout.
Resolves: rhbz#1691632
This compose type creates a partitioned disk as a qcow2 file, but with
only one partition instead of using a separate /boot.
(cherry picked from commit 44e14176bb)
Resolves: rhbz#1689140
This option will create an optionally compressed tarball containing a
disk image. This format is used by Google's Compute Engine.
This also adds a new option, tar_disk_name, to set the name of the disk
image that will be wrapped in the final tarball. opts.image_name
continues to be the final output file name.
(cherry picked from commit c941b82b0c)
Related: rhbz#1689140
Modify imgutils.compress to allow the "rootdir" argument to be either a
directory or a single file to add to an archive.
(cherry picked from commit c585b91422)
Related: rhbz#1689140
If provided, round the disk image size up to a multiple of the value.
This allows for image formats with specific size-alignment requirements
(e.g., disk size must be in GiB).
(cherry picked from commit 8ef4f431d8)
Related: rhbz#1689140
If a repository has `sslcacert`, `sslclientcert`, or `ssclientkey` set,
pass them to anaconda through the kickstart file. This is mostly the
case when using RHEL repositories that are accessed through a
subscription.
(cherry picked from commit e194b5926c)
Resolves: rhbz#1663950
This allows iso builds to include the extra kernel boot parameters by
passing them to the arch-specific live/*tmpl template.
Also adds tests to make sure it is written to config.toml in the build
metadata.
Resolves: rhbz#1687743
The shlex splitting can fail, resulting in error messages like:
ERROR livemedia-creator: No closing quotation
without any context in the log files. This logs the line that failed to
be split and expanded.
Related: rhbz#1687743
This adds a new livemedia-creator argument, --extra-boot-args, which can
be used to add arguments to the kernel command-line in the templates.
Related: rhbz#1687743
Sometimes it is necessary to modify the kernel command-line of the
image, this adds support for a [customizations.kernel] section to the
blueprint:
[customizations.kernel]
append = "nosmt=force"
This will be appended to the kickstart's bootloader --append argument.
Includes tests for modifying the bootloader line, the kickstart
template, and examining the final-kickstart.ks created for a compose.
Related: rhbz#1687743
Reading a blueprint wasn't checking to see if it had been deleted so it
was returning the most recent commit before it had been deleted. This
allowed things like starting a compose with a blueprint that technically
doesn't exist.
One exception to this is the /changes/ route, it must be available so
that you can use the commit hash to undo a delete.
This also adds tests for the various operations.
(cherry picked from commit d32f477e0b)
Resolves: rhbz#1683441
The reason for the 3G minimum was because anaconda had a bug with how it
calculated minimum disk size when using kickstart. The fix for this has
been in Anaconda since 29.16, so we can now remove our limit and
create somewhat smaller disk images.
Resolves: rhbz#1677741
In order to support iso creation on multiple arches with the templates
we need to be able to select different packages based on arch.
lorax-composer uses the arch-specific Lorax templates in order to
generate the output iso so this patch:
1. Creates a new template and type to parse it, live-install.tmpl
which contains only installpkg commands and #if clauses for arch
2. Removes bootloader related packages from the live-iso.ks
3. Remove dracut-config-rescue exclusion because it can cause problems
with some blueprints.
4. Switch logo requirement to system-logos which is satisfied by
generic-logos or fedora-logos. This prevents conflicts when a blueprint
installs fedora-release-workstation.
So in the future, if x86.tmpl, etc. need a new package to support
creating the iso it should be added to the correct section in
./share/live/live-install.tmpl
Resolves: rhbz#1673744
This template runner only uses the installpkg command to gather a list
of package NEVRA to be installed to support live iso creation.
Related: rhbz#1673744
This will make it easier to add a new subclass that only handles
installpkg for use with livemedia-creator and lorax-composer iso
creation.
Related: rhbz#1673744
reqpart can be used to make kickstarts more platform agnostic, creating
needed partitions without lmc having to keep track of the arch-specific
needs. eg. ppc64 needs prepboot and /boot
This increases the size of the disk based on whether reqpart or
reqpart --add-boot is in the kickstart.
Note that this is only valid for partitioned disk output types, not
for filesystem images or live iso output.
Related: rhbz#1673744
Apparently nobody has used these since the switch to py3, xrange is now
range and it needs to read the file in binary mode when generating the
sha256.
Related: rhbz#1673744
