Commit Graph

141 Commits

Author SHA1 Message Date
Adam Williamson
3359b896d1 runtime-install: exclude gnome-firmware and sigrok-firmware
gnome-firmware is a GNOME app for installing firmwares, no use
here at all. sigrok-firmware is for signal analyzers, again, no
need for it here.

Signed-off-by: Adam Williamson <awilliam@redhat.com>
2020-09-08 11:50:15 -07:00
Adam Williamson
afa7e2af37 runtime-cleanup: Drop video playback acceleration drivers
We're not going to be playing any videos during installation, I
don't think.

Signed-off-by: Adam Williamson <awilliam@redhat.com>
2020-09-08 11:50:15 -07:00
Adam Williamson
a87f438af1 runtime-install: don't install notification-daemon
libnotify dropped the requirement just a couple of months after
this line was added, but we never took it back out again.

Signed-off-by: Adam Williamson <awilliam@redhat.com>
2020-09-08 11:50:15 -07:00
Brian C. Lane
e1785d13b8 config_files: Update aarch64, ppc, and sparc timeouts to 60s
This makes the timeouts the same on all arches.

Fixes #1068
2020-09-01 16:28:49 -07:00
e5f50e81c3 templates: Ensure nano is installed for the runtime environment
The expectation is that all environments where an editor might be
used should ship GNU nano by default and tools should activate it
when an "editor" is requested. This change should ensure that for
the install media runtime environment.

Reference: https://fedoraproject.org/wiki/Changes/UseNanoByDefault

Resolves: rhbz#1874094
2020-09-01 11:39:35 -07:00
Vendula Poncova
c2a3b7dbf3 lorax: Install fcoe-utils
Explicitly install the fcoe-utils package on the boot.iso.
It is a weak dependency of anaconda-install-env-deps.
2020-07-17 09:21:51 -07:00
Vendula Poncova
48b268dc9e lorax: Enable swap on zram
Install the zram-generator-defaults package on the boot.iso.
2020-07-17 09:21:51 -07:00
Dan Horák
0dbfe28745 include generic.ins for s390 boot iso
Include the generic.ins file on the s390 boot iso, so it's directly bootable
on an LPAR. The full iso already had generic.ins included.
2020-06-09 09:58:58 -07:00
Brian C. Lane
3c745aed8d Revert "lorax: Remove vmlinuz from install.img /boot"
This reverts commit 6025da1421.

It ends up that using the install.img with qemu and PXE and fips=1 is a
common use case. Without vmlinuz in the install.img rootfs it has
nothing to run the check against.

Related: rhbz#1782737
2020-06-01 13:49:22 -07:00
Dan Horák
564f78e629 drop 32-bit support from ppc live image grub.cfg
Seems petitboot can't properly parse the live image grub config on ppc, thus
booting fails on bare-metal. Fix the problem by removing the obsolete 32-bit
entries.
2020-05-19 14:10:50 -07:00
Brian C. Lane
6fdb09f9e2 rsyslog: Disable journal ratelimits during install
Every log entry is sacred

Resolves: rhbz#1752754
2020-04-28 13:47:57 -07:00
Brian C. Lane
6025da1421 lorax: Remove vmlinuz from install.img /boot
The kernel in /boot is not needed. Keep the .vmlinuz*hmac file so that
fips mode can check it (this requires dracut-050 or later).

Related: rhbz#1782737
2020-03-26 08:17:51 -07:00
Brian C. Lane
e2e8deb906 lorax: Write package lists in run_transaction
A change in glibc now requires /proc be mounted in order to run mknod
which is needed in order to run rpm from runtime-postinstall.

This drops that code from the template and moves writing the package
list into run_transaction, which already has all of the needed
information to generate the list.

Resolves: rhbz#1812895
2020-03-16 11:51:11 -07:00
Brian C. Lane
a30531d41b Add dig and comm to the boot.iso
The /usr/libexec/chrony-helper script requires them.

Resolves: rhbz#1812127
2020-03-11 08:42:01 -07:00
Brian C. Lane
54548e4076 lorax: Cleanup the removefrom --allbut files
Some of the files no longer exist, some of them have moved. In the case
of dracut the 98systemd directory was renamed to 98dracut-systemd, but
nobody noticed.

This updates the following:
 * rename 98systemd to 98dracut-systemd so scripts are in the
   install.img
 * drop fedora-release removefrom, it now only has os-release
   fedora-repos has the repo files, not anaconda, they are moved by
   runtime-postinstall.tmpl
 * Use initscripts to keep the /etc/init.d, chkconfig only has an empty
   directory.
 * gtk2-engines is no longer installed
 * metacity doesn't include anything in /etc/
 * /usr/share/X11/rgb.txt is no longer installed
 * libgstbadallocators-1.0.so
2020-02-27 08:50:32 -08:00
Brian C. Lane
622e15c85a lorax: Add eject back into the boot.iso
The eject utility moved into util-linux and the package was dropped, but
since the runtime-cleanup template is using `removefrom util-linux
--allbut` it was never added to the boot.iso after the move.

This removes the package request for eject and adds it to the list of
binaries to keep from util-linux.
2020-02-20 10:00:53 -08:00
Akira TAGOH
7d7d158399 Reflect fonts packages from comps
Add lohit-marathi-fonts for Marathi.

Replace kacst-*-fonts with paktype-naskh-basic-fonts for Urdu,
for Arabic, we use dejavu-sans-fonts.

Replace lklug-fonts with google-noto-sans-sinhala-vf-fonts for Sinhala.

Replace lohit-gurmukhi-fonts with google-noto-sans-gurmukhi-fonts for Gurmukhi.
2020-02-10 12:03:54 -08:00
Brian C. Lane
c5f6fd6d30 Add dmidecode on supported architectures
Currently supported on i386, x86_64, aarch64

Related: rhbz#1714793
2019-11-14 11:46:46 -08:00
Brian C. Lane
d8bf3427a6 Add live iso support to s390
With this patch lmc and lorax-composer can be used to create a live iso
when running on s390 systems.
2019-10-31 09:47:18 -07:00
Brian C. Lane
5efaa876e1 aarch64: Fix live-iso creation on aarch64
Drop unneeded uboot-tools, and remove iso-graft from the aarch64.tmpl

Related: rhbz#1752002
2019-09-25 11:07:20 -07:00
Martin Kolman
6f01aedc8a Keep the zramctl utility from util-linux on boot.iso
Anaconda uses zram to allow installation on low memory systems.
We used to have a custom script called "zram-stats", that can be
used to test and debug zram usage during installation.

The script no longer works & zramctl now provides much better
output than our script ever did. So we decided to decommission
the old Anaconda provided script & use zramctl instead.

So change the cleanup rule in the Lorax boot.iso template
to keep the zramctl utility.

Related: rhbz#1561773
2019-09-20 08:52:50 -07:00
David Lehman
b8c1e706bb Use smarter multipath detection logic.
This new setting for 'find_multipaths' tries to prevent things like
LVM from going ahead and activating LVM on the individual disks/paths
until there is reasonable certainty (via a timeout) that the device
is not a component of a multipath set.

NOTE: 'smart' is supported by device-mapper-multipath v0.7.7 and later.
2019-08-20 16:23:15 -07:00
Pat Riehecky
fb1fcce0fd Remove .build-id from install media 2019-07-29 13:25:57 -07:00
Dan Horák
9f9cba35a2 don't skip Xorg packages on s390x to allow local GUI installation under KVM 2019-07-25 08:49:14 -07:00
Pat Riehecky
e11fc2037f Leave lscpu in the image for additional debugging 2019-07-09 11:42:23 -07:00
Jan Stodola
f24877b06e Fix path to generic.prm
Also quote ${extra_boot_args} as in the other templates

Related: rhbz#1712822
2019-05-23 15:28:31 -07:00
Brian C. Lane
8a89edf7bf Add -iso-level 3 when the install.img is > 4GiB
xorrisofs needs to use iso-level 3 when creating images with large
files. This adds tests to all the relevant templates, just like we used
to do for udf and mkisofs.
2019-04-05 15:06:48 -07:00
Brian C. Lane
6ccbfe0585 Don't remove chmem and lsmem from install.img 2019-03-26 13:29:35 -07:00
Brian C. Lane
235813212f Add extra boot args to the livemedia-creator iso templates
This adds a new livemedia-creator argument, --extra-boot-args, which can
be used to add arguments to the kernel command-line in the templates.
2019-03-26 11:06:57 -07:00
Brian C. Lane
372bef945f Update ppc64le isolabel to match x86_64 logic
It was substituting _ which didn't match what pungi uses for creating
the DVD. Make things consistent and use - as the replacement character.

Resolves: rhbz#1687882
2019-03-15 11:16:58 -07:00
Brian C. Lane
b1407900ac Add blacklist_exceptions to multipath.conf
Resolves: rhbz#1685363
2019-03-15 08:30:51 -07:00
Brian C. Lane
f3c147448a Add a ppc64le template for live iso creation 2019-02-25 13:49:12 -08:00
Brian C. Lane
3b8de2a233 Move the package requirements for live-iso setup out of the template
In order to support iso creation on multiple arches with the templates
we need to be able to select different packages based on arch.
lorax-composer uses the arch-specific Lorax templates in order to
generate the output iso so this patch:

1. Creates a new template and type to parse it, live-install.tmpl
   which contains only installpkg commands and #if clauses for arch
2. Removes bootloader related packages from the live-iso.ks
3. Remove dracut-config-rescue exclusion because it can cause problems
   with some blueprints.
4. Switch logo requirement to system-logos which is satisfied by
   generic-logos or fedora-logos. This prevents conflicts when a blueprint
   installs fedora-release-workstation.

So in the future, if x86.tmpl, etc. need a new package to support
creating the iso it should be added to the correct section in
./share/live/live-install.tmpl
2019-02-25 13:49:12 -08:00
Jiri Konecny
d64a320ba1 Remove unsupported anaconda-docker-addon (#619)
It is failing to load on Fedora for quite some time and there no-one
complaining about this so it would be easier to disable it instead of
fixing it.
2019-02-21 08:44:29 -08:00
sharkcz
d35232d9cc drop Apple/HFS bits from the templates (#602)
Drop the remaining non-ppc64le bits from the templates. Make the ISO creation
work with xorriso.

fixes https://bugzilla.redhat.com/show_bug.cgi?id=1676411
2019-02-12 10:14:32 -08:00
Brian C. Lane
458d120afe Copy .discinfo to the boot.iso
This should close #187
2019-01-29 14:06:28 -08:00
Brian C. Lane
2a3c41e1ce Use xorrisofs instead of mkisofs
Update the templates to use xorrisofs, require the newer version of
syslinux and syslinux-nonlinux.

This closes issue #326
2019-01-29 14:01:05 -08:00
Brian C. Lane
8a2e2a7a36 dracut-fips is no longer a subpackage, it is included in dracut. 2019-01-18 08:24:25 -08:00
Dan Horák
c53de4e63c set inst.stage2 for ppc64le image (rhbz#1577587) 2019-01-08 08:49:42 -08:00
Dan Horák
e939469524 all supported arches have docker 2019-01-07 13:52:46 -08:00
Dan Horák
a477db33d6 drop big endian ppc/ppc64 support 2019-01-07 13:52:46 -08:00
Dan Horák
3625e8e27c fbset has been retired 2019-01-07 13:52:46 -08:00
Javier Martinez Canillas
763ca83f9f Install grubby-deprecated package for ARMv7
Most bootloaders used in Fedora already have BootLoaderSpec but extlinux
doesn't yet. So when using extlinux the old grubby must to be installed.

Resolves: rhbz#1649778

Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
2018-11-26 10:06:00 -08:00
Brian C. Lane
8e749efbbf Fix make_appliance and the libvirt.tmpl
Apparently nobody has used these since the switch to py3, xrange is now
range and it needs to read the file in binary mode when generating the
sha256.
2018-11-12 11:13:37 -08:00
Marek Marczykowski-Górecki
fa2158c7a9 Drop non-determinism from default templates
Some files are created in non-reproducible way, including including
random data explicitly (/etc/machine-id), timestamps (fontconfig cache,
ldconfig aux-cache, certs cache), or entries in random order (groups,
systemd catalog, package list).
Fix this by either making the files reproducible, or removing them.
2018-10-19 14:43:29 -07:00
Brian C. Lane
3246c01443 Include python3-pyatspi on boot.iso (#1506595)
Including this makes it easier for dogtail tests to be run on the
various releases.
2018-09-19 09:04:29 -07:00
Akira TAGOH
ab85ad5c86 Replace CJK fonts with Google Noto CJK 2018-09-18 09:12:09 -07:00
Radek Vykydal
45e093241d Revert "Don't activate default auto connections after switchroot"
This reverts commit 044d7381a2.
2018-09-07 09:10:46 -07:00
Peter Robinson
8abf6be950 Add the create ISO component for ARMv7
The ostree compose process in pungi wants ISOs and it was the last part
of the ARMv7 components that weren't at parity with other architectures.
Add the missing functionality.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
2018-09-06 09:10:02 -07:00
Radek Vykydal
044d7381a2 Don't activate default auto connections after switchroot
Resolves: rhbz#1555934

Add NetworkManager config file turning default auto connections off.
2018-09-04 12:04:57 -07:00