Run df on the filesystem image after it has been created.
Output will be in program.log, eg:
Running... df /var/tmp/lorax.imgutils.wm04pg_v
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/loop0 1998672 1619508 362780 82% /var/tmp/lorax.imgutils.wm04pg_v
Return code: 0
It ends up that this isn't as easy as you'd think. Anaconda sets up some
signal handlers to handle cleanly exiting, but they are not being run
when sent a TERM after package installation has started. I think DNF
resets them causing it to get ignored.
When the cancel is sent it can take several minutes for it to have an
effect. In my testing it usually takes around 2 minutes for anaconda to
notice and exit.
This sends a TERM to the process and then waits for it to exit. When it
returns it then removed any device-mapper devices that were setup for
image installations, removes any hanging loop devices.
It then kills off any process with pyanaconda. in the cmdline, and
anaconda-bus.conf (because anaconda starts a bunch of helpers and if it
doesn't shut down cleanly they remain running).
Resolves: rhbz#1656691
In addition to monitoring the logs for errors, call a function (or
functions) that tell it to cancel the anaconda process and cleanup.
Also check for a cancel after creating the squashfs image for live-iso
since that's a long running process.
This required adding a new argument to a number of existing functions,
passing it down to QEMUInstall and novirt_install where the function is
called.
Resolves: rhbz#1656691
When there is no run or new symlink do one last check to make sure no
STATUS file was written. If it is missing, go ahead and remove the
results directory.
Related: rhbz#1656691
If another CANCEL request has already been made just exit from
uuid_cancel. If the build is FINISHED before it times out just exit,
don't remove the finished results.
Related: rhbz#1656691
When the repository has multiple arches, eg. i686 and x86_64, it should
add a new entry to the project's builds list, not create a new project
in the list.
This handles that by adding a modified insort_left function and
examining the packages returned from dnf to make sure they aren't
already listed in the results. It also handles adding them in sorted
order so that no further sorting needs to be done on the results.
Resolves: rhbz#1656642
(cherry picked from commit d18934775c)
If the system ran out of space, or was rebooted unexpectedly, the state
of the queue symlinks, or the results STATUS files may be inconsistent.
This checks them and:
* Removes broken symlinks from queue/new and queue/run
* Removes symlinks from run and sets the build to FAILED
* Sets builds w/o a STATUS to FAILED
* Sets builds with STATUS of RUNNING to FAILED
* Creates missing queue/new symlinks to results with STATUS of WAITING
So, any builds that were running during the reboot will be FAILED, and
any that were waiting to be started will be started upon rebooting.
Resolves: rhbz#1647985
(cherry picked from commit 4dd9004d13)
SELinux applies the correct labels, setfiles is no longer needed.
This allows lorax to run with SELinux in Enforcing mode.
(cherry picked from commit 8b11705ea0)
Anaconda, Lorax, lorax-composer, and livemedia-creator can all now run
with SELinux in Enforcing mode. It does not need to be disabled and if
there are denials they should be reported as a bug.
Log the current state of SELinux when starting, update the
documentation.
(cherry picked from commit 35b8957f12)
Running lorax-composer --no-system-repos will prevent it from copying
the dnf repositories from /etc/yum.repos.d/ into the lorax-composer repo
directory. It will *only* use repositories setup using the sources api
or written to /var/lib/lorax/composer/repos.d/
If lorax-composer has previously been run without this switch the system
repos will need to be removed from the composer/repos.d/ directory. It
would also be a good idea to remove the cached metadata in
/var/tmp/composer/
Resolves: rhbz#1650363
This covers things like installing globbed package names from multiple
repos, pinned package versions, and ltmpl functions
Related: rhbz#1548586
(cherry picked from commit a4783ba29f)
And in an intermediate version it returns a VectorString object which
isn't serializable by the json or toml modules.
So convert it to a list so that the type is consistent in the sources
code.
(cherry picked from commit e9e5139750)
The previous method worked, but wasn't exactly idiomatic. This is more
correct, and appears to work the same (templates depsolve, version globs
work, multiple repos work).
Note that this does use a private dnf attribute ._goal, but the word is
that this is going to become a public api soon, so yes it is there on
purpose.
Depending on how lorax-composer is run setting up an empty blueprints
directory can fail. So this moves checking/creation until after the
other directories are created and uses make_owned_dir to make sure
ownership is correct.
It needs to be root in order to set the ownership and permissions on the
directories that are under /var/lib/lorax/composer/
Refactor the directory creation into a utility function, and use a umask
of 0o006 to ensure that the parent directories created do not have o+rw
set on them (makedirs behavior is different between Python 3.6 and 3.7
so umask of 0 doesn't work consistently).
If a package is in multiple repos dnf may return more than 1 of them
when using best...glob so we pick the highest NEVRA one and install
that.
Related: rhbz#1636239
composer-cli uses TOML for 'blueprints save' which was returning an
empty 200 response if the blueprint didn't exist. Change this to return
a standard 400 error response if the blueprint doesn't exist.
composer-cli is already setup to handle receiving json when an error is
returned so just the toml API response for `blueprints/save` needed to
be changed.
`os.path.exists("/run/weldr/api.socket")` returns False for users which have no
access. This leads to composer printing that the file does not exist, which is
misleading.
Since it's no possible to distinguish the two cases, fix this problem by
combining them and showing a single error message.
Anaconda requires the root password to be set or locked, so if there
isn't anything setting it we write out 'rootpw --lock'
Also adds tests for this.
Resolves: rhbz#1626122
See https://bugzilla.redhat.com/show_bug.cgi?id=1595917 and
https://github.com/rpm-software-management/dnf/pull/1200 for
more on this. Briefly, DNF before 3.0 presented this config
value as a list...and mutating it worked. DNF from 3.0 until
3.6 presented it as a list...mutating it didn't work, but also
didn't *fail*, so this has actually not been doing anything on
DNF 3.x but we haven't noticed.
In DNF 3.6 values like this are presented as tuples instead of
lists, to try and catch usages like this, and it worked! We
need to change this one.
There is an additional weirdness here. tsflags is actually, in
libdnf terms, an OptionStringListAppend option: that means that
when something tries to *set* its value, the new value is just
appended to the existing list of values. This is very weird
behaviour when you're interacting with it like this, but
happens to be quite useful, as we can just 'set' the value to
a list like this and it will actually get appended (which is
what we want), and this one syntax happens to work correctly in
DNF 2.x, 3.0 through 3.5.1, and 3.6.
Signed-off-by: Adam Williamson <awilliam@redhat.com>
When the kickstart is handed off to Anaconda for building it will
download its own copy of the metadata and re-run the depsolve. So if the
dnf cache isn't current there will be a mismatch and the build will
fail to find some of the versions in final-kickstart.ks
This adds a new context to DNFLock, .lock_check, that will force a check
of the metadata. It also implements its own timeout and forces a
refresh of the metadata when that expires because the dnf expiration
doesn't always work as expected.
Resolves: rhbz#1631561
Ends up you cannot use the kickstart user command on root, since it
already exists, so we have to translate that into a rootpw command.
So [[customizations.user]] with name = "root" only support key, which
will set the ssh key, and password which will use rootpw to set the
password. plain text or encrypted are supported.
Related: rhbz#1626122
This differs from lmc's --make-ami in that creates a full disk image instead of
an fsimage. Create a raw disk image with a / and /boot partitions, and enable
sshd, chronyd, and cockpit by default.
Remove `except` block which immediately raises the same exception again (it's
not a subclass of another caught exception, so this is safe).
Remove a false positive, because it is not emitted from the code base.
Disable subprocess-popen-preexec-fn in startProgram, which is not used
internally.
lorax uses pyanaconda's SimpleConfigParser in three different
places (twice with a copy that's been dumped into pylorax, once
by importing it), just to do a fairly simple job: read some
values out of /etc/os-release. The only value SimpleConfigParser
is adding over Python's own ConfigParser here is to read a file
with no section headers, and to unquote the values. The cost is
either a dependency on pyanaconda, or needing to copy the whole
of simpleparser plus some other utility bits from pyanaconda
into lorax. This seems like a bad trade-off.
This changes the approach: we copy one very simple utility
function from pyanaconda (`unquote`), and do some very simple
wrapping of ConfigParser to handle reading a file without any
section headers, and returning unquoted values. This way we can
read what we need out of os-release without needing a dep on
pyanaconda or to copy lots of things from it into pylorax.
Resolves: #449Resolves: #450
Signed-off-by: Adam Williamson <awilliam@redhat.com>
In the near-future there may be /lib/modules/ directories for older
kernels with weak dependencies listed. These may not match the installed
kernel(s) so we cannot depend on them to drive generate_module_data.
Instead use the existing findkernels() function to get the list of
installed kernels and iterate those, running depmod on them.
Resolves: rhbz#1622213
At the end of disk image installs, use fstrim on the generated filesystem to
discard any blocks that were allocated during the install and are now unused.
This will allow tools such as qemu-img to create images that do not include
deleted data.
For raw disk images that do not go through qemu-img, use fallocate --dig-holes
to create sparse holes in place of the unused blocks.
(cherry picked from commit 9717b3fd98)
blueprints/changes is different, each blueprint has it's own total,
limited by the call's limit. So it needs to find the max total of all
the requested blueprints.
The blueprints/changes API is a bit different from the others, the total
that it includes is for each blueprint, not one total for all of them,
since there will be a different number of commits for each.
The function is passed the dict, and it can be used to select the total
to use for retrieving all of the results. If it isn't included it will
use data["total"] which works fine in most cases.
Add a limit argument to all potentially paginated results, equal to
whatever the composer backend is the total number of results. This still
has the potential to provide truncated data if the number of results
increases between the two HTTP requests.
Resolves: #404
This adds the following optional arguments to the /compose/status route:
- type, matches the compose_type field
- status, matches the queue_status field
- blueprint, matches the blueprint field
A value of 1 is too low for heavy users of the API, such as the weldr-web
interface.
This is also systemd's default for sockets it opens. Using lorax-composer with
socket activation already results in a backlog of SOMAXCONN connections.
Currently we are making MBR disk images for qcow2 and partitioned disk,
so the UEFI packages aren't required at this point.
Move the clearpart command into compose.py so that in the futute it can
use clearpart --disklabel to create a GPT image, and add the required
packages to the package set.
