Commit Graph

405 Commits

Author SHA1 Message Date
Brian C. Lane
6db00b977e Drop 32 bit for loop from ppc64 grub2 config (#1169878)
Older versions of petitboot don't understand the for loop and won't
boot.  We also don't shipt 32 bit media anymore so there is no reason
for this to remain.

(cherry picked from commit 5909574a44)
2014-12-02 12:23:38 -08:00
David Lehman
c79b291923 Don't include the stock lvm.conf.
We started including it as an unintended side-effect of commit 9ca487f8.

lvm doesn't like it when there are multiple 'global' sections in lvm.conf,
and we add one right at the end of that block. We expect ours to be the
file's only content.

(cherry picked from commit 4a7552d4be)

Related: rhbz#1149992
2014-10-31 13:22:42 -05:00
Brian C. Lane
f259ff0e29 Use all upper case for shim in live/efi.tmpl
mkefiboot now expects all upper case for BOOT*.EFI

Related: rhbz#1100048

Conflicts:
	share/live/efi.tmpl
2014-10-15 11:44:09 -04:00
Martin Kolman
d646ddb5d6 Revert "Don't remove /usr/share/doc/anaconda." (#1072033)
The help content path has been changed to /usr/share/anaconda/help,
so this Lorax change is no longer needed.

This reverts commit 8bd3d8d232.

Related: rhbz#1072033
2014-10-07 18:44:36 +02:00
Martin Kolman
1f56b27082 Libgailutil is required yelp, don't remove it (#1072033)
Related: rhbz#1072033
2014-10-06 18:13:08 +02:00
Peter Jones
26cfe3ebc8 Make sure shim is actually in the package list on aarch64 as well.
Otherwise all the other stuff gets to be just extra error messages and
failures.

Signed-off-by: Peter Jones <pjones@redhat.com>
2014-10-03 16:45:45 -04:00
Peter Jones
771ff40c4e Use shim on aarch64.
We have shim and grub working together on aarch64 now, so we may as well
use them.

(this also makes the case of boot${arch}.efi not mixed-case, which
should guarantee it's in FAT rather than VFAT...)

Related: rhbz#1100048

Signed-off-by: Peter Jones <pjones@redhat.com>
2014-10-02 15:58:04 -07:00
Vratislav Podzimek
b343637745 Keep the /etc/lvm/profiles directory in the image
Profile definitions are needed e.g. for creation of thin pools with specific
profile.

Related: rhbz#869456
2014-10-02 15:44:59 +02:00
Chris Lumens
8bd3d8d232 Don't remove /usr/share/doc/anaconda.
That's where the help is stored.

Resolves: rhbz#1147518
2014-09-30 09:59:36 -04:00
Chris Lumens
bc0976b8d6 Stop removing libXt from the installation media.
It's needed by yelp, which is how anaconda displays help.

Related: rhbz#1147518
2014-09-30 09:59:25 -04:00
Radek Vykydal
5b841e69a4 network: add support for bridge (#1075195)
Related: rhbz#1075195
2014-09-26 13:50:17 +02:00
Brian C. Lane
44b6948d1e Add more tools for rescue mode (#1109785)
This adds od, hexdump, hexedit, gdisk, and binaries from sg3_utils

Resolves: rhbz#1109785
(cherry picked from commit 8a804d10e5)
2014-09-09 11:27:04 -07:00
Brian C. Lane
02177d916f Add kexec anaconda addon (#1116335)
Add the kexec addon to the boot.iso

Resolves: rhbz#1116335

(cherry picked from commit 41a289fc0e)
2014-09-08 11:21:37 -07:00
Brian C. Lane
84af4b08f5 Add ppc64le arch (#1136490)
basearch is ppc64le so we needs to check for that in addition to ppc64.

Resolves:rhbz#1136490
(cherry picked from commit 72357bf96b6b016c3a39b2af51eaf5cf724a0928)
2014-09-03 10:43:00 -07:00
Dan Horák
d1ec67c8d2 allow setting additional dracut parameters for DVD s390x installs (#1132050)
The installation from DVD on s390x needs setting the target disks and
network information that are usually set by editing the generic.prm file.
By including the "rd.cmdline=ask" parameter dracut will open a simple
dialog so the user can enter the required information.

Resolves: rhbz#1132050
(cherry picked from commit e92ea26206)
2014-08-29 15:30:48 -07:00
Brian C. Lane
da8326fd58 livemedia-creator: Update ppc64 live to use grub2
Update the templates and configuration files to support grub2 live
image creation.

Related: rhbz#1102318
Related: rhbz#1131199
2014-08-27 16:27:52 -07:00
David W. Aquilina
7d6e8c65f3 Yaboot to grub2 conversion cleanup.
Drop yaboot from runtime-install and don't install efika.forth

Related: rhbz#1131199

Signed-off-by: Brian C. Lane <bcl@redhat.com>
2014-08-19 09:19:15 -07:00
Paulo Flabiano Smorigo
af4cf82071 GRUB2 as the ISO boot loader for POWER arch (#1131199)
Currently, yaboot is the ISO boot loader in fedora and the Fedora on
POWER team is making an effort in order to replace it by GRUB2 in the
F20 release cycle. I'm sending a lorax patch so you guys can comment
on it. I'm planning to create a feature page for that too.

This patch only change the lorax template for ppc and should not
affect other archs, like x86.

--
Paulo Flabiano Smorigo
Software Engineer
Linux Technology Center - IBM Systems & Technology Group

Resolves: rhbz#1131199
Signed-off-by: Brian C. Lane <bcl@redhat.com>
2014-08-19 09:19:15 -07:00
d.marlin
6f27e0bd09 Add efibootmgr to installpkg list for aarch64. (#1130366)
Resolves: rhbz#1130366
2014-08-15 16:59:24 -07:00
Brian C. Lane
1c936ee984 Add xfsdump and remove extra files from xfsprogs (#1118654)
Resolves: rhbz#1118654
2014-08-12 11:49:39 -07:00
Brian C. Lane
1686a1a159 Add ipmitool and drivers (#1126009)
Add the ipmi tools and keep the impi drivers in the image.

Resolves: rhbz#1126009
2014-08-12 11:28:33 -07:00
d.marlin
bbec9e21bd Update grub2-efi.cfg for aarch64 to more closely match x86 (#1089418).
Resolves: rhbz#1089418.

Signed-off-by: David A. Marlin <dmarlin@redhat.com>
2014-08-12 11:20:29 -07:00
Brian C. Lane
ee71bc9b11 Use BOOTAA64.efi for AARCH64 bootloader filename (#1080113)
Need to stay withing the FAT filename 8.3 limits

Resolves: rhbz#1080113
2014-07-30 17:04:46 -07:00
Brian C. Lane
ccb43c2a62 Drop devicetree from aarch64 grub2-efi.cfg (#1089418)
This is non longer needed, Acadia/Biscayne now contains an embedded DTB.

Resolves: rhbz#1089418
2014-07-30 17:01:01 -07:00
Brian C. Lane
59f256e989 livemedia-creator: Add ppc64 live creation support (#1102318)
The ppc config files were missing from the live config_files directory
and ppc needs the correct lib directory so lmc has been switched to use
ArchData driven from the installed kernel arch.

Resolves: rhbz#1102318
2014-07-30 16:58:40 -07:00
Colin Walters
033dfac48d runtime-install: Add rpm-ostree
rpm-ostree is a new payload type available in Anaconda, will be used
by RHEL Atomic Host.

Related: rhbz#1113535
Port of rpmostreepayload patches from master
commit 3345a97f35
2014-07-28 09:35:48 +02:00
Brian C. Lane
ce23e3e097 Install rdma so that dracut will use it along with libmlx4 (#1089564)
libmlx4 needs rdma, otherwise it is skipped when dracut builds the
initrd.

Resolves: rhbz#1089564
2014-04-23 06:44:37 -07:00
Brian C. Lane
c4ea32367d Stop removing curl after adding it (#1083205)
curl is useful for things like kickstart %pre and %post

Resolves: rhbz#1083205
2014-04-03 14:15:24 -07:00
Peter Jones
d2de389cba Make lorax's installation of lockdown.efi conditional on its existence.
lockdown.efi only exists in the beta, but it'll probably also exist in
the 7.1 beta.  So don't toss this stuff out completely, but don't use it
if shim doesn't provide lockdown.efi either.

Resolves: rhbz#1071380

Signed-off-by: Peter Jones <pjones@redhat.com>
2014-02-28 11:36:20 -05:00
Brian C. Lane
e6015f93c5 createrepo is needed by driver disks (#1016004)
deltarpm is needed by createrepo.

Related: rhbz#1016004
2014-02-26 10:06:55 -08:00
d.marlin
f2c4d4a43c Improve aarch64 UEFI support (#1067671)
Update the templates and config file to better support EFI on aarch64
on 64-bit ARM.

Resolves: rhbz#1067671

Signed-off-by: David A. Marlin <dmarlin@redhat.com>
Signed-off-by: Brian C. Lane <bcl@redhat.com>
2014-02-24 12:44:14 -08:00
Brian C. Lane
d30390aa9e Remove unneeded images from the product -logos (#1068721)
The background images are not used during install, as well as a number
of other items from redhat-logos. There was also a bug -- product.name
did not expand to 'redhat' so it wasn't removing anything from the -logos
package.

Resolves: rhbz#1068721
2014-02-21 10:41:03 -08:00
Brian C. Lane
28bf37089b fedora- services are named rhel- (#1066118)
These services were renamed for RHEL but never updated. They could
potentially cause problems with the installer.

Resolves: rhbz#1066118
2014-02-17 10:28:01 -08:00
Brian C. Lane
5b9c8c7ab5 Remove unneeded packages from runtime-install (#1065557)
These aren't shipped or needed by rhel7 so remove them, cleaning up the
output from lorax a bit.

Resolves: rhbz#1065557
2014-02-17 10:27:48 -08:00
Brian C. Lane
d08d8081b6 Include mesa-dri-drivers (#1053940)
Radeon cards need these.

Resolves: rhbz#1053940
2014-02-12 15:34:38 -08:00
Radek Vykydal
61401e2640 Don't activate default auto connections after switchroot (#1012511)
Related: rhbz#1012511

Add NetworkManager config file turning default auto connections off.
2014-01-31 17:05:25 +01:00
Will Woods
b01abcaf64 Activate anaconda-shell@.service on switch to empty VT (#980062)
Right now, logind reserves tty6 for a login shell, which is not what we
want - normally anaconda puts Xorg there, and there's no need for a
login prompt anyway.

This configures logind to activate "anaconda-shell@.service" when a user
switches to an unused tty, and reserves tty2 for that purpose (which is
where users expect a shell anyway).

This will avoid us having login prompts that users don't know what to do
with. It also probably saves us a little bit of RAM.
2014-01-24 13:05:35 -05:00
d.marlin
3a5e515d4f Add initial 64-bit ARM (aarch64) support (#1034432)
Signed-off-by: Brian C. Lane <bcl@redhat.com>

Resolves: rhbz#1034432
2013-12-17 10:48:59 -08:00
Brian C. Lane
7f090e3311 s390 switch to generic condev (#1042765)
Resolves: rhbz#1042765
2013-12-16 09:53:31 -08:00
Brian C. Lane
ca3d374a64 Add SB lockdown to EFI grub menu (#1030495)
Resolves: rhbz#1030495
2013-11-15 14:03:17 -08:00
Brian C. Lane
0a9bdb2157 Include partx (#1022899)
Used by lvm on multipath.

Resolves: rhbz#1022899
2013-11-14 13:47:20 -08:00
David Shea
26d8c14796 Create upgrade.img using redhat-upgrade-dracut
Use redhat-upgrade-dracut for the RHEL version of the system-upgrade
dracut module. upgrade.img also needs the convertfs module for upgrades
from RHEL6.

Resolves: rhbz#1029999
2013-11-13 13:07:20 -05:00
Vratislav Podzimek
123728393d Do not remove libdaemon from the runtime environment (#1028938)
It is needed by the new NetworkManager.
2013-11-11 12:46:37 +01:00
Brian C. Lane
09490877a0 Install subscription-manager (#1026304)
Only use the product-id plugin.

Resolves: rhbz#1026304
2013-11-04 11:29:52 -08:00
Brian C. Lane
12e03abfa9 Set UEFI defaults to match BIOS (#1021451,#1021446)
60 second timeout and default to testing media.

Resolves: rhbz#1021451
Resolves: rhbz#1021446
2013-10-31 16:17:12 -07:00
Brian C. Lane
dccaa0eeb0 Keep virtio_console module (#750231)
virtio_console is a module in RHEL7, so we need to leave it in place
when cleaning the image. It will be loaded automatically when needed.
2013-10-11 13:34:49 -07:00
Brian C. Lane
e8f114b4cb drop dracut args from config files (#1008054)
It no longer autoassembles things so we don't need to pass rd.md=0, etc.
2013-09-24 17:01:12 -07:00
Brian C. Lane
7d83abb8d0 livemedia-creator: Fix gcdx64.efi path to work for other distros than Fedora (#1003078) 2013-09-18 16:59:32 -07:00
David Shea
186999b5da Keep liblzo2.* (#997976)
/usr/lib*/realmd/realmd needs liblzo2.

(cherry picked from commit d001ff409a)
2013-08-16 12:24:57 -04:00
Harald Hoyer
22a36d3a81 dracut-nohostonly and dracut-norescue got renamed for dracut >= 030 (#990305) 2013-08-01 10:05:08 -07:00