With the new Fstab class from prior pull request there is an
opportunity to handle all fstab related actions to be done
by that class. This commit extends the Fstab class with an
add_entry method such that we can avoid the extra lists
holding raw fstab lines in e.g the disk builder. In the end
all fstab related data is stored in an instance of the Fstab
class. This also extends the KIWI api by an fstab management
class. Related to #1329 and #1349
Handling of fstab should be done in its own namespace and class.
The current handling of fstab entries is spread at several places.
There should be only one code that writes the fstab entries and
that code should also care for the correct canonical order of
the mountpoints
Added new type attribute:
```xml
<type ... spare_part_fs_attributes="..."/>
```
which can be a comma separated list of the following currently
supported filesystem attributes:
* no-copy-on-write
* synchronous-updates
See chattr and filesystem manual pages for details on those
attributes. More attributes for the spare part context can be
added on request. This Fixes#1233
In an OEM deployment that requested the creation of a swap
partition via <oem-swap> that swap partition was created
at first boot and was always the last partition on the disk.
This was required because it could not be placed before
any other partition without destroying those partition
contents. This process leaves the system in an inflexible
condition if the storage device can change its geometry
dynamicly as it's the case for SAN systems. The typical
deployment target for OEM images are SAN storage clusters
and it's cumbersome to resize the root partition if swap
is last.
This commit Fixes#1231 and changes the handling of swap if
requested via <oem-swap> as follows:
1. The swap space is created as part of the image build process
and no longer on first boot of the image via dracut code.
This increases the size of the non compressed .raw disk image
by the configured swap space size or the default. The
compressed versions are not affected since zero initialized
swap space compresses to almost no space. Deployment of
the image however also deploys the swap partition which
increases deployment time. For big swap configurations
it's advisable to switch off image verification via
oem-skip-verify. For very big swap configurations it's
also recommended to prevent kiwi from adding them as part
of the image and let them be created on first boot via
a systemd service that e.g places a swap file, or creates
a swap volume when possible such that the fexibility to
resize the rootfs is still available.
2. The setup of the swap space is now explicit. It's no longer
calculated by twice times RAM size because on newer machines
this could lead to huge numbers. Either the kiwi encoded
default swap size applies or the user configured value.
3. LVM based oem disks creates the swap space as logical volume.
The volume is created as part of the image build process
and no longer on first boot. The swap volume at build time
of the image is of a minimal size and gets resized on first
boot.
4. The move of the swap creation into the builder code also
handles swap per configured device persistency schema like
any other devices. This means by default swap is mounted
via by-uuid name and thus also Fixes#1259
This commit makes home attribute of users definition optional. This way
the home directory is created according to the distribution defaults.
Note that `-m` option is passed to user add, thus the home directory is
requested to be created even without having an explicit home path
defined.
Fixes#1025
The message that display the selected source type was
using the former metalink text which is wrong. This
patch corrects the message and only display it if a
sourcetype was specified
Along with the fsmountoptions attribute there is now also the
fscreateoptions attribute which allows to control the options
used for creating the filesystem. Please note, it's not kiwi's
task to validate that the given option string is supported
by the selected filesystem. This means providing wrong values
here will cause the build to fail at the time the filesystem
gets created. This Fixes#1109
Before this commit isolinux was used to boot an ISO and
thus forms a hard requirement. isolinux however only
exists for the x86 platform. This limitation did not
allow to create ISO images for other platforms. With this
commit a refactoring of the ISO boot setup is introduced.
* isolinux is only used if the bios firmware is requested
and the platform matches the x86 architecture. A runtime
check will check for this condition and exits early if
not applicable
* in case of the EFI firmware we already used grub in
EFI mode but still had isolinux in place for the legacy/CSM
boot. That part is now also replaced by a platform specific
grub eltorito image and grub's boot_hybrid.img for hybrid
boot. On platforms that do not provide those modules the
support for it will be skipped
With this change in place it's possible to control the ISO
boot layout through the firmware setup and all platform
specific modules are handled as such. Therefore we also
deleted the syslinux requirement. This Fixes#1092
There is no further demand in the client config creation for the
legacy netboot code. Customers using the netboot initrd already
create the client config.<MAC> file manually or through another
system. With the next generation kiwi we also recommend the disk
based network deployment using the dracut capabilities and marked
the netboot code as still supported but on the legacy stream.
Along with the deletion in the schema the following changes
were also done:
* Deleted use of pxedeploy section in implementation
* Increase schema version to v7.0
* Update documentation on schema version update
* Added xsl stylesheet conversion from v6.9 to v7.0
Automatic schema version upgrade from v6.9 to v7.0 deletes
the pxedeploy section from any type specification
This Fixes#19
This commit adds runtime configuration parameters to disable the runtime
checks. This is specially handy if someone does not want to use the kiwi
dracut modules and provide custom ones instead. In orde disable some
runtime check consider a runtime config yaml like:
runtime_checks:
- disable:
- check_dracut_module_for_oem_install_in_package_list
- check_dracut_module_for_live_iso_in_package_list
This commit fixes#893
Added runtime check check_volume_setup_defines_multiple_fullsize_volumes
which reads the volume setup and counts the number of volumes that
define a 'all' volume. Only one is allowed
This commits adds initial support to build Vagrant boxes with the Virtualbox
provider.
- The attribute 'provider' of the option <vagrantconfig> now supports the option
"virtualbox".
- A new boolean attribute 'virtualbox_guest_additions_present' was added to
<vagrantconfig>. When set to true, KIWI will assume that guest additions have
been installed into the base image and configure the shared folders to use
vboxfs, otherwise rsync will be used.
This fixes#532 (https://github.com/SUSE/kiwi/issues/532).
In the preferences section the following optional subsection
can be configured:
<rpm-locale-filtering>true|false</rpm-locale-filtering>
If set to true the default locales POSIX, C, and C.UTF-8 are
applied as rpm install_lang macro. If the locale section is
configured in addition the list is extended by that information
too
During the image build the custom rpm macro %_install_langs
is configured with the <locale> setup from the KIWI XML
description. This allows to filter language specific packages
on the rpm level and Fixes#771
This commit adds a runtime check for preferences metadata. More
specfic verifies there is a packagemanager defined and an image version
defined.
Fixes#925
Calling kiwi result bundle will take the image build results
and bundle the relevant image files according to their image
type. Depending on the result configuration this could instruct
the bundler to compress one or more files from the result.
By default this compression is switched off in the bundler but
can be activated to save storage space and speedup download
of the image with the following runtime configuration:
bundle:
- compress: true|false
If compression is activated the result image has to be
uncompressed before it can be used. This Fixes#901
Disk size calculation must take into account the empty volumes that
are to be mounted in a directory that does not exist in the root tree
otherwise there is KeyError. The result of
storate/setup._calculate_volume_mbytes must be a dict including all
defined volumes.
Fixes#904
This commit adds the history section in contianerconfig. With it
'author', 'created_by' and 'comment' can be customized. In addition
'created' is always included with the image creation date time.
'created_by' entry is set to 'KIWI __version__' by default if nothing
is provided.
Fixes#852
An initiative to formulate industry standards around container
formats and runtime is available at https://www.opencontainers.org
Different tools to implement the specifications had been
created. The purpose of this class and its sub-classes is
to provide a common interface in kiwi to allow using all
tools such that the container support in kiwi covers every
linux distribution no matter what tooling was preferred.
Related to Issue #859
In fate#323743 the decision was made to drop dmraid from
the distribution. Along with the low business case for those
controllers and the support for linux softraid via mdadm
we also drop the support in kiwi for oem-ataraid-scan
The optional label attribute in a volume section allows
to specify a filesystem label for the selected volume.
The label setup will have no effect on filesystems
which implements their own volume management like it's
the case for btrfs. This Fixes#738
Change the ContainerBuilder class to evaluate on the
configuration options to decide if the container archive
should be compressed or not. By default the archive will
be compressed, thus there is no change to the former behavior
but can be setup in ~/.config/kiwi/config.yml as follows:
container:
- compress: none|xz
This Fixes#725
This commit adds a new `uninstall` type for packages. Packages listed
with this type will be removed by the package manager cleaning also any
unneeded dependency. The removal is executed after running `config.sh`.
Also in this commit `delete` type for packages is now executed after
`uninstall` packages, meaing it also happens after `config.sh`.
Fixes#625
With this commit the profile can include other profiles as a dependency.
This way it is possible build an image defined by multiple profiles by just
calling a single composed profile from the command line.
Fixes#658
As the kiwi build dracut initrd is a generic one which
includes all installed dracut modules we missed a way to
exclude modules from beeing incorporated even if we know
it would not be needed. One example is the multipath module
which would only be useful if the oem multipath scan is
configured in the image description
With the move of the boot descriptions in its own package
the kiwi search path needs to be adapted to look for boot
descriptions in /usr/share/kiwi/custom_boot. In addition
a runtime check to exit early if the boot description could
not be found or is not specified will be provided. Related
to Issue #576
The installation of the above mentioned dracut module package
is required for oem images which uses dracut as initrd system
and have the creation of an installation image requested.
This is related to Issue #576
If an image description only contains package requests
from a bootstrap section but no image packages, it's not
required to install a package manager package into the
system
The new rule allows to check for required attributes for a specific
image type and is used for the filesystem attribute which is required
for the image type oem, vmx and pxe. This Fixes#476
Make sure the default initrd_system is set to dracut
for the vmx image type and to kiwi if no initrd_system
is specified. This allows to simplify other code parts
as we can trust there is a value set
Custom disk format options passed in the formatoptions
attribute were not handled. In addition options with a
value passed to qemu were handled in the wrong way.
This commit addresses both problems and Fixes#463
