494 lines
		
	
	
		
			12 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			494 lines
		
	
	
		
			12 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
| // SPDX-License-Identifier: GPL-2.0-only
 | |
| /*
 | |
|  * Synopsys DWC Ethernet Quality-of-Service v4.10a linux driver
 | |
|  *
 | |
|  * Copyright (C) 2016 Joao Pinto <jpinto@synopsys.com>
 | |
|  */
 | |
| 
 | |
| #include <linux/clk.h>
 | |
| #include <linux/clk-provider.h>
 | |
| #include <linux/device.h>
 | |
| #include <linux/gpio/consumer.h>
 | |
| #include <linux/ethtool.h>
 | |
| #include <linux/io.h>
 | |
| #include <linux/iopoll.h>
 | |
| #include <linux/ioport.h>
 | |
| #include <linux/module.h>
 | |
| #include <linux/of.h>
 | |
| #include <linux/of_net.h>
 | |
| #include <linux/mfd/syscon.h>
 | |
| #include <linux/platform_device.h>
 | |
| #include <linux/reset.h>
 | |
| #include <linux/stmmac.h>
 | |
| 
 | |
| #include "stmmac_platform.h"
 | |
| #include "dwmac4.h"
 | |
| 
 | |
| struct tegra_eqos {
 | |
| 	struct device *dev;
 | |
| 	void __iomem *regs;
 | |
| 
 | |
| 	struct reset_control *rst;
 | |
| 	struct clk *clk_master;
 | |
| 	struct clk *clk_slave;
 | |
| 	struct clk *clk_tx;
 | |
| 	struct clk *clk_rx;
 | |
| 
 | |
| 	struct gpio_desc *reset;
 | |
| };
 | |
| 
 | |
| static int dwc_eth_dwmac_config_dt(struct platform_device *pdev,
 | |
| 				   struct plat_stmmacenet_data *plat_dat)
 | |
| {
 | |
| 	struct device *dev = &pdev->dev;
 | |
| 	u32 burst_map = 0;
 | |
| 	u32 bit_index = 0;
 | |
| 	u32 a_index = 0;
 | |
| 
 | |
| 	if (!plat_dat->axi) {
 | |
| 		plat_dat->axi = kzalloc(sizeof(struct stmmac_axi), GFP_KERNEL);
 | |
| 
 | |
| 		if (!plat_dat->axi)
 | |
| 			return -ENOMEM;
 | |
| 	}
 | |
| 
 | |
| 	plat_dat->axi->axi_lpi_en = device_property_read_bool(dev,
 | |
| 							      "snps,en-lpi");
 | |
| 	if (device_property_read_u32(dev, "snps,write-requests",
 | |
| 				     &plat_dat->axi->axi_wr_osr_lmt)) {
 | |
| 		/**
 | |
| 		 * Since the register has a reset value of 1, if property
 | |
| 		 * is missing, default to 1.
 | |
| 		 */
 | |
| 		plat_dat->axi->axi_wr_osr_lmt = 1;
 | |
| 	} else {
 | |
| 		/**
 | |
| 		 * If property exists, to keep the behavior from dwc_eth_qos,
 | |
| 		 * subtract one after parsing.
 | |
| 		 */
 | |
| 		plat_dat->axi->axi_wr_osr_lmt--;
 | |
| 	}
 | |
| 
 | |
| 	if (device_property_read_u32(dev, "snps,read-requests",
 | |
| 				     &plat_dat->axi->axi_rd_osr_lmt)) {
 | |
| 		/**
 | |
| 		 * Since the register has a reset value of 1, if property
 | |
| 		 * is missing, default to 1.
 | |
| 		 */
 | |
| 		plat_dat->axi->axi_rd_osr_lmt = 1;
 | |
| 	} else {
 | |
| 		/**
 | |
| 		 * If property exists, to keep the behavior from dwc_eth_qos,
 | |
| 		 * subtract one after parsing.
 | |
| 		 */
 | |
| 		plat_dat->axi->axi_rd_osr_lmt--;
 | |
| 	}
 | |
| 	device_property_read_u32(dev, "snps,burst-map", &burst_map);
 | |
| 
 | |
| 	/* converts burst-map bitmask to burst array */
 | |
| 	for (bit_index = 0; bit_index < 7; bit_index++) {
 | |
| 		if (burst_map & (1 << bit_index)) {
 | |
| 			switch (bit_index) {
 | |
| 			case 0:
 | |
| 			plat_dat->axi->axi_blen[a_index] = 4; break;
 | |
| 			case 1:
 | |
| 			plat_dat->axi->axi_blen[a_index] = 8; break;
 | |
| 			case 2:
 | |
| 			plat_dat->axi->axi_blen[a_index] = 16; break;
 | |
| 			case 3:
 | |
| 			plat_dat->axi->axi_blen[a_index] = 32; break;
 | |
| 			case 4:
 | |
| 			plat_dat->axi->axi_blen[a_index] = 64; break;
 | |
| 			case 5:
 | |
| 			plat_dat->axi->axi_blen[a_index] = 128; break;
 | |
| 			case 6:
 | |
| 			plat_dat->axi->axi_blen[a_index] = 256; break;
 | |
| 			default:
 | |
| 			break;
 | |
| 			}
 | |
| 			a_index++;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	/* dwc-qos needs GMAC4, AAL, TSO and PMT */
 | |
| 	plat_dat->has_gmac4 = 1;
 | |
| 	plat_dat->dma_cfg->aal = 1;
 | |
| 	plat_dat->flags |= STMMAC_FLAG_TSO_EN;
 | |
| 	plat_dat->pmt = 1;
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int dwc_qos_probe(struct platform_device *pdev,
 | |
| 			 struct plat_stmmacenet_data *plat_dat,
 | |
| 			 struct stmmac_resources *stmmac_res)
 | |
| {
 | |
| 	int err;
 | |
| 
 | |
| 	plat_dat->stmmac_clk = devm_clk_get(&pdev->dev, "apb_pclk");
 | |
| 	if (IS_ERR(plat_dat->stmmac_clk)) {
 | |
| 		dev_err(&pdev->dev, "apb_pclk clock not found.\n");
 | |
| 		return PTR_ERR(plat_dat->stmmac_clk);
 | |
| 	}
 | |
| 
 | |
| 	err = clk_prepare_enable(plat_dat->stmmac_clk);
 | |
| 	if (err < 0) {
 | |
| 		dev_err(&pdev->dev, "failed to enable apb_pclk clock: %d\n",
 | |
| 			err);
 | |
| 		return err;
 | |
| 	}
 | |
| 
 | |
| 	plat_dat->pclk = devm_clk_get(&pdev->dev, "phy_ref_clk");
 | |
| 	if (IS_ERR(plat_dat->pclk)) {
 | |
| 		dev_err(&pdev->dev, "phy_ref_clk clock not found.\n");
 | |
| 		err = PTR_ERR(plat_dat->pclk);
 | |
| 		goto disable;
 | |
| 	}
 | |
| 
 | |
| 	err = clk_prepare_enable(plat_dat->pclk);
 | |
| 	if (err < 0) {
 | |
| 		dev_err(&pdev->dev, "failed to enable phy_ref clock: %d\n",
 | |
| 			err);
 | |
| 		goto disable;
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| 
 | |
| disable:
 | |
| 	clk_disable_unprepare(plat_dat->stmmac_clk);
 | |
| 	return err;
 | |
| }
 | |
| 
 | |
| static void dwc_qos_remove(struct platform_device *pdev)
 | |
| {
 | |
| 	struct net_device *ndev = platform_get_drvdata(pdev);
 | |
| 	struct stmmac_priv *priv = netdev_priv(ndev);
 | |
| 
 | |
| 	clk_disable_unprepare(priv->plat->pclk);
 | |
| 	clk_disable_unprepare(priv->plat->stmmac_clk);
 | |
| }
 | |
| 
 | |
| #define SDMEMCOMPPADCTRL 0x8800
 | |
| #define  SDMEMCOMPPADCTRL_PAD_E_INPUT_OR_E_PWRD BIT(31)
 | |
| 
 | |
| #define AUTO_CAL_CONFIG 0x8804
 | |
| #define  AUTO_CAL_CONFIG_START BIT(31)
 | |
| #define  AUTO_CAL_CONFIG_ENABLE BIT(29)
 | |
| 
 | |
| #define AUTO_CAL_STATUS 0x880c
 | |
| #define  AUTO_CAL_STATUS_ACTIVE BIT(31)
 | |
| 
 | |
| static void tegra_eqos_fix_speed(void *priv, unsigned int speed, unsigned int mode)
 | |
| {
 | |
| 	struct tegra_eqos *eqos = priv;
 | |
| 	unsigned long rate = 125000000;
 | |
| 	bool needs_calibration = false;
 | |
| 	u32 value;
 | |
| 	int err;
 | |
| 
 | |
| 	switch (speed) {
 | |
| 	case SPEED_1000:
 | |
| 		needs_calibration = true;
 | |
| 		rate = 125000000;
 | |
| 		break;
 | |
| 
 | |
| 	case SPEED_100:
 | |
| 		needs_calibration = true;
 | |
| 		rate = 25000000;
 | |
| 		break;
 | |
| 
 | |
| 	case SPEED_10:
 | |
| 		rate = 2500000;
 | |
| 		break;
 | |
| 
 | |
| 	default:
 | |
| 		dev_err(eqos->dev, "invalid speed %u\n", speed);
 | |
| 		break;
 | |
| 	}
 | |
| 
 | |
| 	if (needs_calibration) {
 | |
| 		/* calibrate */
 | |
| 		value = readl(eqos->regs + SDMEMCOMPPADCTRL);
 | |
| 		value |= SDMEMCOMPPADCTRL_PAD_E_INPUT_OR_E_PWRD;
 | |
| 		writel(value, eqos->regs + SDMEMCOMPPADCTRL);
 | |
| 
 | |
| 		udelay(1);
 | |
| 
 | |
| 		value = readl(eqos->regs + AUTO_CAL_CONFIG);
 | |
| 		value |= AUTO_CAL_CONFIG_START | AUTO_CAL_CONFIG_ENABLE;
 | |
| 		writel(value, eqos->regs + AUTO_CAL_CONFIG);
 | |
| 
 | |
| 		err = readl_poll_timeout_atomic(eqos->regs + AUTO_CAL_STATUS,
 | |
| 						value,
 | |
| 						value & AUTO_CAL_STATUS_ACTIVE,
 | |
| 						1, 10);
 | |
| 		if (err < 0) {
 | |
| 			dev_err(eqos->dev, "calibration did not start\n");
 | |
| 			goto failed;
 | |
| 		}
 | |
| 
 | |
| 		err = readl_poll_timeout_atomic(eqos->regs + AUTO_CAL_STATUS,
 | |
| 						value,
 | |
| 						(value & AUTO_CAL_STATUS_ACTIVE) == 0,
 | |
| 						20, 200);
 | |
| 		if (err < 0) {
 | |
| 			dev_err(eqos->dev, "calibration didn't finish\n");
 | |
| 			goto failed;
 | |
| 		}
 | |
| 
 | |
| 	failed:
 | |
| 		value = readl(eqos->regs + SDMEMCOMPPADCTRL);
 | |
| 		value &= ~SDMEMCOMPPADCTRL_PAD_E_INPUT_OR_E_PWRD;
 | |
| 		writel(value, eqos->regs + SDMEMCOMPPADCTRL);
 | |
| 	} else {
 | |
| 		value = readl(eqos->regs + AUTO_CAL_CONFIG);
 | |
| 		value &= ~AUTO_CAL_CONFIG_ENABLE;
 | |
| 		writel(value, eqos->regs + AUTO_CAL_CONFIG);
 | |
| 	}
 | |
| 
 | |
| 	err = clk_set_rate(eqos->clk_tx, rate);
 | |
| 	if (err < 0)
 | |
| 		dev_err(eqos->dev, "failed to set TX rate: %d\n", err);
 | |
| }
 | |
| 
 | |
| static int tegra_eqos_init(struct platform_device *pdev, void *priv)
 | |
| {
 | |
| 	struct tegra_eqos *eqos = priv;
 | |
| 	unsigned long rate;
 | |
| 	u32 value;
 | |
| 
 | |
| 	rate = clk_get_rate(eqos->clk_slave);
 | |
| 
 | |
| 	value = (rate / 1000000) - 1;
 | |
| 	writel(value, eqos->regs + GMAC_1US_TIC_COUNTER);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int tegra_eqos_probe(struct platform_device *pdev,
 | |
| 			    struct plat_stmmacenet_data *data,
 | |
| 			    struct stmmac_resources *res)
 | |
| {
 | |
| 	struct device *dev = &pdev->dev;
 | |
| 	struct tegra_eqos *eqos;
 | |
| 	int err;
 | |
| 
 | |
| 	eqos = devm_kzalloc(&pdev->dev, sizeof(*eqos), GFP_KERNEL);
 | |
| 	if (!eqos)
 | |
| 		return -ENOMEM;
 | |
| 
 | |
| 	eqos->dev = &pdev->dev;
 | |
| 	eqos->regs = res->addr;
 | |
| 
 | |
| 	if (!is_of_node(dev->fwnode))
 | |
| 		goto bypass_clk_reset_gpio;
 | |
| 
 | |
| 	eqos->clk_master = devm_clk_get(&pdev->dev, "master_bus");
 | |
| 	if (IS_ERR(eqos->clk_master)) {
 | |
| 		err = PTR_ERR(eqos->clk_master);
 | |
| 		goto error;
 | |
| 	}
 | |
| 
 | |
| 	err = clk_prepare_enable(eqos->clk_master);
 | |
| 	if (err < 0)
 | |
| 		goto error;
 | |
| 
 | |
| 	eqos->clk_slave = devm_clk_get(&pdev->dev, "slave_bus");
 | |
| 	if (IS_ERR(eqos->clk_slave)) {
 | |
| 		err = PTR_ERR(eqos->clk_slave);
 | |
| 		goto disable_master;
 | |
| 	}
 | |
| 
 | |
| 	data->stmmac_clk = eqos->clk_slave;
 | |
| 
 | |
| 	err = clk_prepare_enable(eqos->clk_slave);
 | |
| 	if (err < 0)
 | |
| 		goto disable_master;
 | |
| 
 | |
| 	eqos->clk_rx = devm_clk_get(&pdev->dev, "rx");
 | |
| 	if (IS_ERR(eqos->clk_rx)) {
 | |
| 		err = PTR_ERR(eqos->clk_rx);
 | |
| 		goto disable_slave;
 | |
| 	}
 | |
| 
 | |
| 	err = clk_prepare_enable(eqos->clk_rx);
 | |
| 	if (err < 0)
 | |
| 		goto disable_slave;
 | |
| 
 | |
| 	eqos->clk_tx = devm_clk_get(&pdev->dev, "tx");
 | |
| 	if (IS_ERR(eqos->clk_tx)) {
 | |
| 		err = PTR_ERR(eqos->clk_tx);
 | |
| 		goto disable_rx;
 | |
| 	}
 | |
| 
 | |
| 	err = clk_prepare_enable(eqos->clk_tx);
 | |
| 	if (err < 0)
 | |
| 		goto disable_rx;
 | |
| 
 | |
| 	eqos->reset = devm_gpiod_get(&pdev->dev, "phy-reset", GPIOD_OUT_HIGH);
 | |
| 	if (IS_ERR(eqos->reset)) {
 | |
| 		err = PTR_ERR(eqos->reset);
 | |
| 		goto disable_tx;
 | |
| 	}
 | |
| 
 | |
| 	usleep_range(2000, 4000);
 | |
| 	gpiod_set_value(eqos->reset, 0);
 | |
| 
 | |
| 	/* MDIO bus was already reset just above */
 | |
| 	data->mdio_bus_data->needs_reset = false;
 | |
| 
 | |
| 	eqos->rst = devm_reset_control_get(&pdev->dev, "eqos");
 | |
| 	if (IS_ERR(eqos->rst)) {
 | |
| 		err = PTR_ERR(eqos->rst);
 | |
| 		goto reset_phy;
 | |
| 	}
 | |
| 
 | |
| 	err = reset_control_assert(eqos->rst);
 | |
| 	if (err < 0)
 | |
| 		goto reset_phy;
 | |
| 
 | |
| 	usleep_range(2000, 4000);
 | |
| 
 | |
| 	err = reset_control_deassert(eqos->rst);
 | |
| 	if (err < 0)
 | |
| 		goto reset_phy;
 | |
| 
 | |
| 	usleep_range(2000, 4000);
 | |
| 
 | |
| bypass_clk_reset_gpio:
 | |
| 	data->fix_mac_speed = tegra_eqos_fix_speed;
 | |
| 	data->init = tegra_eqos_init;
 | |
| 	data->bsp_priv = eqos;
 | |
| 	data->flags |= STMMAC_FLAG_SPH_DISABLE;
 | |
| 
 | |
| 	err = tegra_eqos_init(pdev, eqos);
 | |
| 	if (err < 0)
 | |
| 		goto reset;
 | |
| 
 | |
| 	return 0;
 | |
| reset:
 | |
| 	reset_control_assert(eqos->rst);
 | |
| reset_phy:
 | |
| 	gpiod_set_value(eqos->reset, 1);
 | |
| disable_tx:
 | |
| 	clk_disable_unprepare(eqos->clk_tx);
 | |
| disable_rx:
 | |
| 	clk_disable_unprepare(eqos->clk_rx);
 | |
| disable_slave:
 | |
| 	clk_disable_unprepare(eqos->clk_slave);
 | |
| disable_master:
 | |
| 	clk_disable_unprepare(eqos->clk_master);
 | |
| error:
 | |
| 	return err;
 | |
| }
 | |
| 
 | |
| static void tegra_eqos_remove(struct platform_device *pdev)
 | |
| {
 | |
| 	struct tegra_eqos *eqos = get_stmmac_bsp_priv(&pdev->dev);
 | |
| 
 | |
| 	reset_control_assert(eqos->rst);
 | |
| 	gpiod_set_value(eqos->reset, 1);
 | |
| 	clk_disable_unprepare(eqos->clk_tx);
 | |
| 	clk_disable_unprepare(eqos->clk_rx);
 | |
| 	clk_disable_unprepare(eqos->clk_slave);
 | |
| 	clk_disable_unprepare(eqos->clk_master);
 | |
| }
 | |
| 
 | |
| struct dwc_eth_dwmac_data {
 | |
| 	int (*probe)(struct platform_device *pdev,
 | |
| 		     struct plat_stmmacenet_data *data,
 | |
| 		     struct stmmac_resources *res);
 | |
| 	void (*remove)(struct platform_device *pdev);
 | |
| };
 | |
| 
 | |
| static const struct dwc_eth_dwmac_data dwc_qos_data = {
 | |
| 	.probe = dwc_qos_probe,
 | |
| 	.remove = dwc_qos_remove,
 | |
| };
 | |
| 
 | |
| static const struct dwc_eth_dwmac_data tegra_eqos_data = {
 | |
| 	.probe = tegra_eqos_probe,
 | |
| 	.remove = tegra_eqos_remove,
 | |
| };
 | |
| 
 | |
| static int dwc_eth_dwmac_probe(struct platform_device *pdev)
 | |
| {
 | |
| 	const struct dwc_eth_dwmac_data *data;
 | |
| 	struct plat_stmmacenet_data *plat_dat;
 | |
| 	struct stmmac_resources stmmac_res;
 | |
| 	int ret;
 | |
| 
 | |
| 	data = device_get_match_data(&pdev->dev);
 | |
| 
 | |
| 	memset(&stmmac_res, 0, sizeof(struct stmmac_resources));
 | |
| 
 | |
| 	/**
 | |
| 	 * Since stmmac_platform supports name IRQ only, basic platform
 | |
| 	 * resource initialization is done in the glue logic.
 | |
| 	 */
 | |
| 	stmmac_res.irq = platform_get_irq(pdev, 0);
 | |
| 	if (stmmac_res.irq < 0)
 | |
| 		return stmmac_res.irq;
 | |
| 	stmmac_res.wol_irq = stmmac_res.irq;
 | |
| 
 | |
| 	stmmac_res.addr = devm_platform_ioremap_resource(pdev, 0);
 | |
| 	if (IS_ERR(stmmac_res.addr))
 | |
| 		return PTR_ERR(stmmac_res.addr);
 | |
| 
 | |
| 	plat_dat = devm_stmmac_probe_config_dt(pdev, stmmac_res.mac);
 | |
| 	if (IS_ERR(plat_dat))
 | |
| 		return PTR_ERR(plat_dat);
 | |
| 
 | |
| 	ret = data->probe(pdev, plat_dat, &stmmac_res);
 | |
| 	if (ret < 0) {
 | |
| 		dev_err_probe(&pdev->dev, ret, "failed to probe subdriver\n");
 | |
| 		return ret;
 | |
| 	}
 | |
| 
 | |
| 	ret = dwc_eth_dwmac_config_dt(pdev, plat_dat);
 | |
| 	if (ret)
 | |
| 		goto remove;
 | |
| 
 | |
| 	ret = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res);
 | |
| 	if (ret)
 | |
| 		goto remove;
 | |
| 
 | |
| 	return ret;
 | |
| 
 | |
| remove:
 | |
| 	data->remove(pdev);
 | |
| 
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| static void dwc_eth_dwmac_remove(struct platform_device *pdev)
 | |
| {
 | |
| 	const struct dwc_eth_dwmac_data *data = device_get_match_data(&pdev->dev);
 | |
| 
 | |
| 	stmmac_dvr_remove(&pdev->dev);
 | |
| 
 | |
| 	data->remove(pdev);
 | |
| }
 | |
| 
 | |
| static const struct of_device_id dwc_eth_dwmac_match[] = {
 | |
| 	{ .compatible = "snps,dwc-qos-ethernet-4.10", .data = &dwc_qos_data },
 | |
| 	{ .compatible = "nvidia,tegra186-eqos", .data = &tegra_eqos_data },
 | |
| 	{ }
 | |
| };
 | |
| MODULE_DEVICE_TABLE(of, dwc_eth_dwmac_match);
 | |
| 
 | |
| static struct platform_driver dwc_eth_dwmac_driver = {
 | |
| 	.probe  = dwc_eth_dwmac_probe,
 | |
| 	.remove_new = dwc_eth_dwmac_remove,
 | |
| 	.driver = {
 | |
| 		.name           = "dwc-eth-dwmac",
 | |
| 		.pm             = &stmmac_pltfr_pm_ops,
 | |
| 		.of_match_table = dwc_eth_dwmac_match,
 | |
| 	},
 | |
| };
 | |
| module_platform_driver(dwc_eth_dwmac_driver);
 | |
| 
 | |
| MODULE_AUTHOR("Joao Pinto <jpinto@synopsys.com>");
 | |
| MODULE_DESCRIPTION("Synopsys DWC Ethernet Quality-of-Service v4.10a driver");
 | |
| MODULE_LICENSE("GPL v2");
 |