61 lines
		
	
	
		
			1.9 KiB
		
	
	
	
		
			Plaintext
		
	
	
	
	
	
			
		
		
	
	
			61 lines
		
	
	
		
			1.9 KiB
		
	
	
	
		
			Plaintext
		
	
	
	
	
	
Texas Instruments Bluetooth Chips
 | 
						|
---------------------------------
 | 
						|
 | 
						|
This documents the binding structure and common properties for serial
 | 
						|
attached TI Bluetooth devices. The following chips are included in this
 | 
						|
binding:
 | 
						|
 | 
						|
* TI CC256x Bluetooth devices
 | 
						|
* TI WiLink 7/8 (wl12xx/wl18xx) Shared Transport BT/FM/GPS devices
 | 
						|
 | 
						|
TI WiLink devices have a UART interface for providing Bluetooth, FM radio,
 | 
						|
and GPS over what's called "shared transport". The shared transport is
 | 
						|
standard BT HCI protocol with additional channels for the other functions.
 | 
						|
 | 
						|
TI WiLink devices also have a separate WiFi interface as described in
 | 
						|
wireless/ti,wlcore.txt.
 | 
						|
 | 
						|
This bindings follows the UART slave device binding in ../serial/serial.yaml.
 | 
						|
 | 
						|
Required properties:
 | 
						|
 - compatible: should be one of the following:
 | 
						|
    "ti,cc2560"
 | 
						|
    "ti,wl1271-st"
 | 
						|
    "ti,wl1273-st"
 | 
						|
    "ti,wl1281-st"
 | 
						|
    "ti,wl1283-st"
 | 
						|
    "ti,wl1285-st"
 | 
						|
    "ti,wl1801-st"
 | 
						|
    "ti,wl1805-st"
 | 
						|
    "ti,wl1807-st"
 | 
						|
    "ti,wl1831-st"
 | 
						|
    "ti,wl1835-st"
 | 
						|
    "ti,wl1837-st"
 | 
						|
 | 
						|
Optional properties:
 | 
						|
 - enable-gpios : GPIO signal controlling enabling of BT. Active high.
 | 
						|
 - vio-supply : Vio input supply (1.8V)
 | 
						|
 - vbat-supply : Vbat input supply (2.9-4.8V)
 | 
						|
 - clocks : Must contain an entry, for each entry in clock-names.
 | 
						|
   See ../clocks/clock-bindings.txt for details.
 | 
						|
 - clock-names : Must include the following entry:
 | 
						|
   "ext_clock" (External clock provided to the TI combo chip).
 | 
						|
 - nvmem-cells: phandle to nvmem data cell that contains a 6 byte BD address
 | 
						|
   with the most significant byte first (big-endian).
 | 
						|
 - nvmem-cell-names: "bd-address" (required when nvmem-cells is specified)
 | 
						|
 | 
						|
Example:
 | 
						|
 | 
						|
&serial0 {
 | 
						|
	compatible = "ns16550a";
 | 
						|
	...
 | 
						|
	bluetooth {
 | 
						|
		compatible = "ti,wl1835-st";
 | 
						|
		enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
 | 
						|
		clocks = <&clk32k_wl18xx>;
 | 
						|
		clock-names = "ext_clock";
 | 
						|
		nvmem-cells = <&bd_address>;
 | 
						|
		nvmem-cell-names = "bd-address";
 | 
						|
	};
 | 
						|
};
 |