511 lines
		
	
	
		
			13 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			511 lines
		
	
	
		
			13 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
| /*
 | |
|  * Copyright 2011 bct electronic GmbH
 | |
|  * Copyright 2013 Qtechnology/AS
 | |
|  *
 | |
|  * Author: Peter Meerwald <p.meerwald@bct-electronic.com>
 | |
|  * Author: Ricardo Ribalda <ricardo.ribalda@gmail.com>
 | |
|  *
 | |
|  * Based on leds-pca955x.c
 | |
|  *
 | |
|  * This file is subject to the terms and conditions of version 2 of
 | |
|  * the GNU General Public License.  See the file COPYING in the main
 | |
|  * directory of this archive for more details.
 | |
|  *
 | |
|  * LED driver for the PCA9633 I2C LED driver (7-bit slave address 0x62)
 | |
|  * LED driver for the PCA9634/5 I2C LED driver (7-bit slave address set by hw.)
 | |
|  *
 | |
|  * Note that hardware blinking violates the leds infrastructure driver
 | |
|  * interface since the hardware only supports blinking all LEDs with the
 | |
|  * same delay_on/delay_off rates.  That is, only the LEDs that are set to
 | |
|  * blink will actually blink but all LEDs that are set to blink will blink
 | |
|  * in identical fashion.  The delay_on/delay_off values of the last LED
 | |
|  * that is set to blink will be used for all of the blinking LEDs.
 | |
|  * Hardware blinking is disabled by default but can be enabled by setting
 | |
|  * the 'blink_type' member in the platform_data struct to 'PCA963X_HW_BLINK'
 | |
|  * or by adding the 'nxp,hw-blink' property to the DTS.
 | |
|  */
 | |
| 
 | |
| #include <linux/acpi.h>
 | |
| #include <linux/module.h>
 | |
| #include <linux/delay.h>
 | |
| #include <linux/string.h>
 | |
| #include <linux/ctype.h>
 | |
| #include <linux/leds.h>
 | |
| #include <linux/err.h>
 | |
| #include <linux/i2c.h>
 | |
| #include <linux/slab.h>
 | |
| #include <linux/of.h>
 | |
| #include <linux/platform_data/leds-pca963x.h>
 | |
| 
 | |
| /* LED select registers determine the source that drives LED outputs */
 | |
| #define PCA963X_LED_OFF		0x0	/* LED driver off */
 | |
| #define PCA963X_LED_ON		0x1	/* LED driver on */
 | |
| #define PCA963X_LED_PWM		0x2	/* Controlled through PWM */
 | |
| #define PCA963X_LED_GRP_PWM	0x3	/* Controlled through PWM/GRPPWM */
 | |
| 
 | |
| #define PCA963X_MODE2_DMBLNK	0x20	/* Enable blinking */
 | |
| 
 | |
| #define PCA963X_MODE1		0x00
 | |
| #define PCA963X_MODE2		0x01
 | |
| #define PCA963X_PWM_BASE	0x02
 | |
| 
 | |
| enum pca963x_type {
 | |
| 	pca9633,
 | |
| 	pca9634,
 | |
| 	pca9635,
 | |
| };
 | |
| 
 | |
| struct pca963x_chipdef {
 | |
| 	u8			grppwm;
 | |
| 	u8			grpfreq;
 | |
| 	u8			ledout_base;
 | |
| 	int			n_leds;
 | |
| 	unsigned int		scaling;
 | |
| };
 | |
| 
 | |
| static struct pca963x_chipdef pca963x_chipdefs[] = {
 | |
| 	[pca9633] = {
 | |
| 		.grppwm		= 0x6,
 | |
| 		.grpfreq	= 0x7,
 | |
| 		.ledout_base	= 0x8,
 | |
| 		.n_leds		= 4,
 | |
| 	},
 | |
| 	[pca9634] = {
 | |
| 		.grppwm		= 0xa,
 | |
| 		.grpfreq	= 0xb,
 | |
| 		.ledout_base	= 0xc,
 | |
| 		.n_leds		= 8,
 | |
| 	},
 | |
| 	[pca9635] = {
 | |
| 		.grppwm		= 0x12,
 | |
| 		.grpfreq	= 0x13,
 | |
| 		.ledout_base	= 0x14,
 | |
| 		.n_leds		= 16,
 | |
| 	},
 | |
| };
 | |
| 
 | |
| /* Total blink period in milliseconds */
 | |
| #define PCA963X_BLINK_PERIOD_MIN	42
 | |
| #define PCA963X_BLINK_PERIOD_MAX	10667
 | |
| 
 | |
| static const struct i2c_device_id pca963x_id[] = {
 | |
| 	{ "pca9632", pca9633 },
 | |
| 	{ "pca9633", pca9633 },
 | |
| 	{ "pca9634", pca9634 },
 | |
| 	{ "pca9635", pca9635 },
 | |
| 	{ }
 | |
| };
 | |
| MODULE_DEVICE_TABLE(i2c, pca963x_id);
 | |
| 
 | |
| static const struct acpi_device_id pca963x_acpi_ids[] = {
 | |
| 	{ "PCA9632", pca9633 },
 | |
| 	{ "PCA9633", pca9633 },
 | |
| 	{ "PCA9634", pca9634 },
 | |
| 	{ "PCA9635", pca9635 },
 | |
| 	{ }
 | |
| };
 | |
| MODULE_DEVICE_TABLE(acpi, pca963x_acpi_ids);
 | |
| 
 | |
| struct pca963x_led;
 | |
| 
 | |
| struct pca963x {
 | |
| 	struct pca963x_chipdef *chipdef;
 | |
| 	struct mutex mutex;
 | |
| 	struct i2c_client *client;
 | |
| 	struct pca963x_led *leds;
 | |
| 	unsigned long leds_on;
 | |
| };
 | |
| 
 | |
| struct pca963x_led {
 | |
| 	struct pca963x *chip;
 | |
| 	struct led_classdev led_cdev;
 | |
| 	int led_num; /* 0 .. 15 potentially */
 | |
| 	char name[32];
 | |
| 	u8 gdc;
 | |
| 	u8 gfrq;
 | |
| };
 | |
| 
 | |
| static int pca963x_brightness(struct pca963x_led *pca963x,
 | |
| 			       enum led_brightness brightness)
 | |
| {
 | |
| 	u8 ledout_addr = pca963x->chip->chipdef->ledout_base
 | |
| 		+ (pca963x->led_num / 4);
 | |
| 	u8 ledout;
 | |
| 	int shift = 2 * (pca963x->led_num % 4);
 | |
| 	u8 mask = 0x3 << shift;
 | |
| 	int ret;
 | |
| 
 | |
| 	ledout = i2c_smbus_read_byte_data(pca963x->chip->client, ledout_addr);
 | |
| 	switch (brightness) {
 | |
| 	case LED_FULL:
 | |
| 		ret = i2c_smbus_write_byte_data(pca963x->chip->client,
 | |
| 			ledout_addr,
 | |
| 			(ledout & ~mask) | (PCA963X_LED_ON << shift));
 | |
| 		break;
 | |
| 	case LED_OFF:
 | |
| 		ret = i2c_smbus_write_byte_data(pca963x->chip->client,
 | |
| 			ledout_addr, ledout & ~mask);
 | |
| 		break;
 | |
| 	default:
 | |
| 		ret = i2c_smbus_write_byte_data(pca963x->chip->client,
 | |
| 			PCA963X_PWM_BASE + pca963x->led_num,
 | |
| 			brightness);
 | |
| 		if (ret < 0)
 | |
| 			return ret;
 | |
| 		ret = i2c_smbus_write_byte_data(pca963x->chip->client,
 | |
| 			ledout_addr,
 | |
| 			(ledout & ~mask) | (PCA963X_LED_PWM << shift));
 | |
| 		break;
 | |
| 	}
 | |
| 
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| static void pca963x_blink(struct pca963x_led *pca963x)
 | |
| {
 | |
| 	u8 ledout_addr = pca963x->chip->chipdef->ledout_base +
 | |
| 		(pca963x->led_num / 4);
 | |
| 	u8 ledout;
 | |
| 	u8 mode2 = i2c_smbus_read_byte_data(pca963x->chip->client,
 | |
| 							PCA963X_MODE2);
 | |
| 	int shift = 2 * (pca963x->led_num % 4);
 | |
| 	u8 mask = 0x3 << shift;
 | |
| 
 | |
| 	i2c_smbus_write_byte_data(pca963x->chip->client,
 | |
| 			pca963x->chip->chipdef->grppwm,	pca963x->gdc);
 | |
| 
 | |
| 	i2c_smbus_write_byte_data(pca963x->chip->client,
 | |
| 			pca963x->chip->chipdef->grpfreq, pca963x->gfrq);
 | |
| 
 | |
| 	if (!(mode2 & PCA963X_MODE2_DMBLNK))
 | |
| 		i2c_smbus_write_byte_data(pca963x->chip->client, PCA963X_MODE2,
 | |
| 			mode2 | PCA963X_MODE2_DMBLNK);
 | |
| 
 | |
| 	mutex_lock(&pca963x->chip->mutex);
 | |
| 	ledout = i2c_smbus_read_byte_data(pca963x->chip->client, ledout_addr);
 | |
| 	if ((ledout & mask) != (PCA963X_LED_GRP_PWM << shift))
 | |
| 		i2c_smbus_write_byte_data(pca963x->chip->client, ledout_addr,
 | |
| 			(ledout & ~mask) | (PCA963X_LED_GRP_PWM << shift));
 | |
| 	mutex_unlock(&pca963x->chip->mutex);
 | |
| }
 | |
| 
 | |
| static int pca963x_power_state(struct pca963x_led *pca963x)
 | |
| {
 | |
| 	unsigned long *leds_on = &pca963x->chip->leds_on;
 | |
| 	unsigned long cached_leds = pca963x->chip->leds_on;
 | |
| 
 | |
| 	if (pca963x->led_cdev.brightness)
 | |
| 		set_bit(pca963x->led_num, leds_on);
 | |
| 	else
 | |
| 		clear_bit(pca963x->led_num, leds_on);
 | |
| 
 | |
| 	if (!(*leds_on) != !cached_leds)
 | |
| 		return i2c_smbus_write_byte_data(pca963x->chip->client,
 | |
| 			PCA963X_MODE1, *leds_on ? 0 : BIT(4));
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int pca963x_led_set(struct led_classdev *led_cdev,
 | |
| 	enum led_brightness value)
 | |
| {
 | |
| 	struct pca963x_led *pca963x;
 | |
| 	int ret;
 | |
| 
 | |
| 	pca963x = container_of(led_cdev, struct pca963x_led, led_cdev);
 | |
| 
 | |
| 	mutex_lock(&pca963x->chip->mutex);
 | |
| 
 | |
| 	ret = pca963x_brightness(pca963x, value);
 | |
| 	if (ret < 0)
 | |
| 		goto unlock;
 | |
| 	ret = pca963x_power_state(pca963x);
 | |
| 
 | |
| unlock:
 | |
| 	mutex_unlock(&pca963x->chip->mutex);
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| static unsigned int pca963x_period_scale(struct pca963x_led *pca963x,
 | |
| 	unsigned int val)
 | |
| {
 | |
| 	unsigned int scaling = pca963x->chip->chipdef->scaling;
 | |
| 
 | |
| 	return scaling ? DIV_ROUND_CLOSEST(val * scaling, 1000) : val;
 | |
| }
 | |
| 
 | |
| static int pca963x_blink_set(struct led_classdev *led_cdev,
 | |
| 		unsigned long *delay_on, unsigned long *delay_off)
 | |
| {
 | |
| 	struct pca963x_led *pca963x;
 | |
| 	unsigned long time_on, time_off, period;
 | |
| 	u8 gdc, gfrq;
 | |
| 
 | |
| 	pca963x = container_of(led_cdev, struct pca963x_led, led_cdev);
 | |
| 
 | |
| 	time_on = *delay_on;
 | |
| 	time_off = *delay_off;
 | |
| 
 | |
| 	/* If both zero, pick reasonable defaults of 500ms each */
 | |
| 	if (!time_on && !time_off) {
 | |
| 		time_on = 500;
 | |
| 		time_off = 500;
 | |
| 	}
 | |
| 
 | |
| 	period = pca963x_period_scale(pca963x, time_on + time_off);
 | |
| 
 | |
| 	/* If period not supported by hardware, default to someting sane. */
 | |
| 	if ((period < PCA963X_BLINK_PERIOD_MIN) ||
 | |
| 	    (period > PCA963X_BLINK_PERIOD_MAX)) {
 | |
| 		time_on = 500;
 | |
| 		time_off = 500;
 | |
| 		period = pca963x_period_scale(pca963x, 1000);
 | |
| 	}
 | |
| 
 | |
| 	/*
 | |
| 	 * From manual: duty cycle = (GDC / 256) ->
 | |
| 	 *	(time_on / period) = (GDC / 256) ->
 | |
| 	 *		GDC = ((time_on * 256) / period)
 | |
| 	 */
 | |
| 	gdc = (pca963x_period_scale(pca963x, time_on) * 256) / period;
 | |
| 
 | |
| 	/*
 | |
| 	 * From manual: period = ((GFRQ + 1) / 24) in seconds.
 | |
| 	 * So, period (in ms) = (((GFRQ + 1) / 24) * 1000) ->
 | |
| 	 *		GFRQ = ((period * 24 / 1000) - 1)
 | |
| 	 */
 | |
| 	gfrq = (period * 24 / 1000) - 1;
 | |
| 
 | |
| 	pca963x->gdc = gdc;
 | |
| 	pca963x->gfrq = gfrq;
 | |
| 
 | |
| 	pca963x_blink(pca963x);
 | |
| 
 | |
| 	*delay_on = time_on;
 | |
| 	*delay_off = time_off;
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| #if IS_ENABLED(CONFIG_OF)
 | |
| static struct pca963x_platform_data *
 | |
| pca963x_dt_init(struct i2c_client *client, struct pca963x_chipdef *chip)
 | |
| {
 | |
| 	struct device_node *np = client->dev.of_node, *child;
 | |
| 	struct pca963x_platform_data *pdata;
 | |
| 	struct led_info *pca963x_leds;
 | |
| 	int count;
 | |
| 
 | |
| 	count = of_get_child_count(np);
 | |
| 	if (!count || count > chip->n_leds)
 | |
| 		return ERR_PTR(-ENODEV);
 | |
| 
 | |
| 	pca963x_leds = devm_kcalloc(&client->dev,
 | |
| 			chip->n_leds, sizeof(struct led_info), GFP_KERNEL);
 | |
| 	if (!pca963x_leds)
 | |
| 		return ERR_PTR(-ENOMEM);
 | |
| 
 | |
| 	for_each_child_of_node(np, child) {
 | |
| 		struct led_info led = {};
 | |
| 		u32 reg;
 | |
| 		int res;
 | |
| 
 | |
| 		res = of_property_read_u32(child, "reg", ®);
 | |
| 		if ((res != 0) || (reg >= chip->n_leds))
 | |
| 			continue;
 | |
| 		led.name =
 | |
| 			of_get_property(child, "label", NULL) ? : child->name;
 | |
| 		led.default_trigger =
 | |
| 			of_get_property(child, "linux,default-trigger", NULL);
 | |
| 		pca963x_leds[reg] = led;
 | |
| 	}
 | |
| 	pdata = devm_kzalloc(&client->dev,
 | |
| 			     sizeof(struct pca963x_platform_data), GFP_KERNEL);
 | |
| 	if (!pdata)
 | |
| 		return ERR_PTR(-ENOMEM);
 | |
| 
 | |
| 	pdata->leds.leds = pca963x_leds;
 | |
| 	pdata->leds.num_leds = chip->n_leds;
 | |
| 
 | |
| 	/* default to open-drain unless totem pole (push-pull) is specified */
 | |
| 	if (of_property_read_bool(np, "nxp,totem-pole"))
 | |
| 		pdata->outdrv = PCA963X_TOTEM_POLE;
 | |
| 	else
 | |
| 		pdata->outdrv = PCA963X_OPEN_DRAIN;
 | |
| 
 | |
| 	/* default to software blinking unless hardware blinking is specified */
 | |
| 	if (of_property_read_bool(np, "nxp,hw-blink"))
 | |
| 		pdata->blink_type = PCA963X_HW_BLINK;
 | |
| 	else
 | |
| 		pdata->blink_type = PCA963X_SW_BLINK;
 | |
| 
 | |
| 	if (of_property_read_u32(np, "nxp,period-scale", &chip->scaling))
 | |
| 		chip->scaling = 1000;
 | |
| 
 | |
| 	/* default to non-inverted output, unless inverted is specified */
 | |
| 	if (of_property_read_bool(np, "nxp,inverted-out"))
 | |
| 		pdata->dir = PCA963X_INVERTED;
 | |
| 	else
 | |
| 		pdata->dir = PCA963X_NORMAL;
 | |
| 
 | |
| 	return pdata;
 | |
| }
 | |
| 
 | |
| static const struct of_device_id of_pca963x_match[] = {
 | |
| 	{ .compatible = "nxp,pca9632", },
 | |
| 	{ .compatible = "nxp,pca9633", },
 | |
| 	{ .compatible = "nxp,pca9634", },
 | |
| 	{ .compatible = "nxp,pca9635", },
 | |
| 	{},
 | |
| };
 | |
| MODULE_DEVICE_TABLE(of, of_pca963x_match);
 | |
| #else
 | |
| static struct pca963x_platform_data *
 | |
| pca963x_dt_init(struct i2c_client *client, struct pca963x_chipdef *chip)
 | |
| {
 | |
| 	return ERR_PTR(-ENODEV);
 | |
| }
 | |
| #endif
 | |
| 
 | |
| static int pca963x_probe(struct i2c_client *client,
 | |
| 					const struct i2c_device_id *id)
 | |
| {
 | |
| 	struct pca963x *pca963x_chip;
 | |
| 	struct pca963x_led *pca963x;
 | |
| 	struct pca963x_platform_data *pdata;
 | |
| 	struct pca963x_chipdef *chip;
 | |
| 	int i, err;
 | |
| 
 | |
| 	if (id) {
 | |
| 		chip = &pca963x_chipdefs[id->driver_data];
 | |
| 	} else {
 | |
| 		const struct acpi_device_id *acpi_id;
 | |
| 
 | |
| 		acpi_id = acpi_match_device(pca963x_acpi_ids, &client->dev);
 | |
| 		if (!acpi_id)
 | |
| 			return -ENODEV;
 | |
| 		chip = &pca963x_chipdefs[acpi_id->driver_data];
 | |
| 	}
 | |
| 	pdata = dev_get_platdata(&client->dev);
 | |
| 
 | |
| 	if (!pdata) {
 | |
| 		pdata = pca963x_dt_init(client, chip);
 | |
| 		if (IS_ERR(pdata)) {
 | |
| 			dev_warn(&client->dev, "could not parse configuration\n");
 | |
| 			pdata = NULL;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	if (pdata && (pdata->leds.num_leds < 1 ||
 | |
| 				 pdata->leds.num_leds > chip->n_leds)) {
 | |
| 		dev_err(&client->dev, "board info must claim 1-%d LEDs",
 | |
| 								chip->n_leds);
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| 
 | |
| 	pca963x_chip = devm_kzalloc(&client->dev, sizeof(*pca963x_chip),
 | |
| 								GFP_KERNEL);
 | |
| 	if (!pca963x_chip)
 | |
| 		return -ENOMEM;
 | |
| 	pca963x = devm_kcalloc(&client->dev, chip->n_leds, sizeof(*pca963x),
 | |
| 								GFP_KERNEL);
 | |
| 	if (!pca963x)
 | |
| 		return -ENOMEM;
 | |
| 
 | |
| 	i2c_set_clientdata(client, pca963x_chip);
 | |
| 
 | |
| 	mutex_init(&pca963x_chip->mutex);
 | |
| 	pca963x_chip->chipdef = chip;
 | |
| 	pca963x_chip->client = client;
 | |
| 	pca963x_chip->leds = pca963x;
 | |
| 
 | |
| 	/* Turn off LEDs by default*/
 | |
| 	for (i = 0; i < chip->n_leds / 4; i++)
 | |
| 		i2c_smbus_write_byte_data(client, chip->ledout_base + i, 0x00);
 | |
| 
 | |
| 	for (i = 0; i < chip->n_leds; i++) {
 | |
| 		pca963x[i].led_num = i;
 | |
| 		pca963x[i].chip = pca963x_chip;
 | |
| 
 | |
| 		/* Platform data can specify LED names and default triggers */
 | |
| 		if (pdata && i < pdata->leds.num_leds) {
 | |
| 			if (pdata->leds.leds[i].name)
 | |
| 				snprintf(pca963x[i].name,
 | |
| 					 sizeof(pca963x[i].name), "pca963x:%s",
 | |
| 					 pdata->leds.leds[i].name);
 | |
| 			if (pdata->leds.leds[i].default_trigger)
 | |
| 				pca963x[i].led_cdev.default_trigger =
 | |
| 					pdata->leds.leds[i].default_trigger;
 | |
| 		}
 | |
| 		if (!pdata || i >= pdata->leds.num_leds ||
 | |
| 						!pdata->leds.leds[i].name)
 | |
| 			snprintf(pca963x[i].name, sizeof(pca963x[i].name),
 | |
| 				 "pca963x:%d:%.2x:%d", client->adapter->nr,
 | |
| 				 client->addr, i);
 | |
| 
 | |
| 		pca963x[i].led_cdev.name = pca963x[i].name;
 | |
| 		pca963x[i].led_cdev.brightness_set_blocking = pca963x_led_set;
 | |
| 
 | |
| 		if (pdata && pdata->blink_type == PCA963X_HW_BLINK)
 | |
| 			pca963x[i].led_cdev.blink_set = pca963x_blink_set;
 | |
| 
 | |
| 		err = led_classdev_register(&client->dev, &pca963x[i].led_cdev);
 | |
| 		if (err < 0)
 | |
| 			goto exit;
 | |
| 	}
 | |
| 
 | |
| 	/* Disable LED all-call address, and power down initially */
 | |
| 	i2c_smbus_write_byte_data(client, PCA963X_MODE1, BIT(4));
 | |
| 
 | |
| 	if (pdata) {
 | |
| 		u8 mode2 = i2c_smbus_read_byte_data(pca963x->chip->client,
 | |
| 						    PCA963X_MODE2);
 | |
| 		/* Configure output: open-drain or totem pole (push-pull) */
 | |
| 		if (pdata->outdrv == PCA963X_OPEN_DRAIN)
 | |
| 			mode2 |= 0x01;
 | |
| 		else
 | |
| 			mode2 |= 0x05;
 | |
| 		/* Configure direction: normal or inverted */
 | |
| 		if (pdata->dir == PCA963X_INVERTED)
 | |
| 			mode2 |= 0x10;
 | |
| 		i2c_smbus_write_byte_data(pca963x->chip->client, PCA963X_MODE2,
 | |
| 					  mode2);
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| 
 | |
| exit:
 | |
| 	while (i--)
 | |
| 		led_classdev_unregister(&pca963x[i].led_cdev);
 | |
| 
 | |
| 	return err;
 | |
| }
 | |
| 
 | |
| static int pca963x_remove(struct i2c_client *client)
 | |
| {
 | |
| 	struct pca963x *pca963x = i2c_get_clientdata(client);
 | |
| 	int i;
 | |
| 
 | |
| 	for (i = 0; i < pca963x->chipdef->n_leds; i++)
 | |
| 		led_classdev_unregister(&pca963x->leds[i].led_cdev);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static struct i2c_driver pca963x_driver = {
 | |
| 	.driver = {
 | |
| 		.name	= "leds-pca963x",
 | |
| 		.of_match_table = of_match_ptr(of_pca963x_match),
 | |
| 		.acpi_match_table = ACPI_PTR(pca963x_acpi_ids),
 | |
| 	},
 | |
| 	.probe	= pca963x_probe,
 | |
| 	.remove	= pca963x_remove,
 | |
| 	.id_table = pca963x_id,
 | |
| };
 | |
| 
 | |
| module_i2c_driver(pca963x_driver);
 | |
| 
 | |
| MODULE_AUTHOR("Peter Meerwald <p.meerwald@bct-electronic.com>");
 | |
| MODULE_DESCRIPTION("PCA963X LED driver");
 | |
| MODULE_LICENSE("GPL v2");
 |