409 lines
11 KiB
C
409 lines
11 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* PlayStation 1/2 joypads via SPI interface Driver
|
|
*
|
|
* Copyright (C) 2017 Tomohiro Yoshidomi <sylph23k@gmail.com>
|
|
*
|
|
* PlayStation 1/2 joypad's plug (not socket)
|
|
* 123 456 789
|
|
* (...|...|...)
|
|
*
|
|
* 1: DAT -> MISO (pullup with 1k owm to 3.3V)
|
|
* 2: CMD -> MOSI
|
|
* 3: 9V (for motor, if not use N.C.)
|
|
* 4: GND
|
|
* 5: 3.3V
|
|
* 6: Attention -> CS(SS)
|
|
* 7: SCK -> SCK
|
|
* 8: N.C.
|
|
* 9: ACK -> N.C.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/device.h>
|
|
#include <linux/input.h>
|
|
#include <linux/module.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/types.h>
|
|
#include <linux/pm.h>
|
|
#include <linux/pm_runtime.h>
|
|
|
|
#define REVERSE_BIT(x) ((((x) & 0x80) >> 7) | (((x) & 0x40) >> 5) | \
|
|
(((x) & 0x20) >> 3) | (((x) & 0x10) >> 1) | (((x) & 0x08) << 1) | \
|
|
(((x) & 0x04) << 3) | (((x) & 0x02) << 5) | (((x) & 0x01) << 7))
|
|
|
|
/* PlayStation 1/2 joypad command and response are LSBFIRST. */
|
|
|
|
/*
|
|
* 0x01, 0x42, 0x00, 0x00, 0x00,
|
|
* 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
|
* 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
|
|
*/
|
|
static const u8 PSX_CMD_POLL[] = {
|
|
0x80, 0x42, 0x00, 0x00, 0x00,
|
|
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
|
|
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00
|
|
};
|
|
|
|
#ifdef CONFIG_JOYSTICK_PSXPAD_SPI_FF
|
|
/* 0x01, 0x43, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00 */
|
|
static const u8 PSX_CMD_ENTER_CFG[] = {
|
|
0x80, 0xC2, 0x00, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00
|
|
};
|
|
/* 0x01, 0x43, 0x00, 0x00, 0x5A, 0x5A, 0x5A, 0x5A, 0x5A */
|
|
static const u8 PSX_CMD_EXIT_CFG[] = {
|
|
0x80, 0xC2, 0x00, 0x00, 0x5A, 0x5A, 0x5A, 0x5A, 0x5A
|
|
};
|
|
/* 0x01, 0x4D, 0x00, 0x00, 0x01, 0xFF, 0xFF, 0xFF, 0xFF */
|
|
static const u8 PSX_CMD_ENABLE_MOTOR[] = {
|
|
0x80, 0xB2, 0x00, 0x00, 0x80, 0xFF, 0xFF, 0xFF, 0xFF
|
|
};
|
|
#endif /* CONFIG_JOYSTICK_PSXPAD_SPI_FF */
|
|
|
|
struct psxpad {
|
|
struct spi_device *spi;
|
|
struct input_dev *idev;
|
|
char phys[0x20];
|
|
bool motor1enable;
|
|
bool motor2enable;
|
|
u8 motor1level;
|
|
u8 motor2level;
|
|
u8 sendbuf[0x20] ____cacheline_aligned;
|
|
u8 response[sizeof(PSX_CMD_POLL)] ____cacheline_aligned;
|
|
};
|
|
|
|
static int psxpad_command(struct psxpad *pad, const u8 sendcmdlen)
|
|
{
|
|
struct spi_transfer xfers = {
|
|
.tx_buf = pad->sendbuf,
|
|
.rx_buf = pad->response,
|
|
.len = sendcmdlen,
|
|
};
|
|
int err;
|
|
|
|
err = spi_sync_transfer(pad->spi, &xfers, 1);
|
|
if (err) {
|
|
dev_err(&pad->spi->dev,
|
|
"%s: failed to SPI xfers mode: %d\n",
|
|
__func__, err);
|
|
return err;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_JOYSTICK_PSXPAD_SPI_FF
|
|
static void psxpad_control_motor(struct psxpad *pad,
|
|
bool motor1enable, bool motor2enable)
|
|
{
|
|
int err;
|
|
|
|
pad->motor1enable = motor1enable;
|
|
pad->motor2enable = motor2enable;
|
|
|
|
memcpy(pad->sendbuf, PSX_CMD_ENTER_CFG, sizeof(PSX_CMD_ENTER_CFG));
|
|
err = psxpad_command(pad, sizeof(PSX_CMD_ENTER_CFG));
|
|
if (err) {
|
|
dev_err(&pad->spi->dev,
|
|
"%s: failed to enter config mode: %d\n",
|
|
__func__, err);
|
|
return;
|
|
}
|
|
|
|
memcpy(pad->sendbuf, PSX_CMD_ENABLE_MOTOR,
|
|
sizeof(PSX_CMD_ENABLE_MOTOR));
|
|
pad->sendbuf[3] = pad->motor1enable ? 0x00 : 0xFF;
|
|
pad->sendbuf[4] = pad->motor2enable ? 0x80 : 0xFF;
|
|
err = psxpad_command(pad, sizeof(PSX_CMD_ENABLE_MOTOR));
|
|
if (err) {
|
|
dev_err(&pad->spi->dev,
|
|
"%s: failed to enable motor mode: %d\n",
|
|
__func__, err);
|
|
return;
|
|
}
|
|
|
|
memcpy(pad->sendbuf, PSX_CMD_EXIT_CFG, sizeof(PSX_CMD_EXIT_CFG));
|
|
err = psxpad_command(pad, sizeof(PSX_CMD_EXIT_CFG));
|
|
if (err) {
|
|
dev_err(&pad->spi->dev,
|
|
"%s: failed to exit config mode: %d\n",
|
|
__func__, err);
|
|
return;
|
|
}
|
|
}
|
|
|
|
static void psxpad_set_motor_level(struct psxpad *pad,
|
|
u8 motor1level, u8 motor2level)
|
|
{
|
|
pad->motor1level = motor1level ? 0xFF : 0x00;
|
|
pad->motor2level = REVERSE_BIT(motor2level);
|
|
}
|
|
|
|
static int psxpad_spi_play_effect(struct input_dev *idev,
|
|
void *data, struct ff_effect *effect)
|
|
{
|
|
struct psxpad *pad = input_get_drvdata(idev);
|
|
|
|
switch (effect->type) {
|
|
case FF_RUMBLE:
|
|
psxpad_set_motor_level(pad,
|
|
(effect->u.rumble.weak_magnitude >> 8) & 0xFFU,
|
|
(effect->u.rumble.strong_magnitude >> 8) & 0xFFU);
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int psxpad_spi_init_ff(struct psxpad *pad)
|
|
{
|
|
int err;
|
|
|
|
input_set_capability(pad->idev, EV_FF, FF_RUMBLE);
|
|
|
|
err = input_ff_create_memless(pad->idev, NULL, psxpad_spi_play_effect);
|
|
if (err) {
|
|
dev_err(&pad->spi->dev,
|
|
"input_ff_create_memless() failed: %d\n", err);
|
|
return err;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#else /* CONFIG_JOYSTICK_PSXPAD_SPI_FF */
|
|
|
|
static void psxpad_control_motor(struct psxpad *pad,
|
|
bool motor1enable, bool motor2enable)
|
|
{
|
|
}
|
|
|
|
static void psxpad_set_motor_level(struct psxpad *pad,
|
|
u8 motor1level, u8 motor2level)
|
|
{
|
|
}
|
|
|
|
static inline int psxpad_spi_init_ff(struct psxpad *pad)
|
|
{
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_JOYSTICK_PSXPAD_SPI_FF */
|
|
|
|
static int psxpad_spi_poll_open(struct input_dev *input)
|
|
{
|
|
struct psxpad *pad = input_get_drvdata(input);
|
|
|
|
pm_runtime_get_sync(&pad->spi->dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void psxpad_spi_poll_close(struct input_dev *input)
|
|
{
|
|
struct psxpad *pad = input_get_drvdata(input);
|
|
|
|
pm_runtime_put_sync(&pad->spi->dev);
|
|
}
|
|
|
|
static void psxpad_spi_poll(struct input_dev *input)
|
|
{
|
|
struct psxpad *pad = input_get_drvdata(input);
|
|
u8 b_rsp3, b_rsp4;
|
|
int err;
|
|
|
|
psxpad_control_motor(pad, true, true);
|
|
|
|
memcpy(pad->sendbuf, PSX_CMD_POLL, sizeof(PSX_CMD_POLL));
|
|
pad->sendbuf[3] = pad->motor1enable ? pad->motor1level : 0x00;
|
|
pad->sendbuf[4] = pad->motor2enable ? pad->motor2level : 0x00;
|
|
err = psxpad_command(pad, sizeof(PSX_CMD_POLL));
|
|
if (err) {
|
|
dev_err(&pad->spi->dev,
|
|
"%s: poll command failed mode: %d\n", __func__, err);
|
|
return;
|
|
}
|
|
|
|
switch (pad->response[1]) {
|
|
case 0xCE: /* 0x73 : analog 1 */
|
|
/* button data is inverted */
|
|
b_rsp3 = ~pad->response[3];
|
|
b_rsp4 = ~pad->response[4];
|
|
|
|
input_report_abs(input, ABS_X, REVERSE_BIT(pad->response[7]));
|
|
input_report_abs(input, ABS_Y, REVERSE_BIT(pad->response[8]));
|
|
input_report_abs(input, ABS_RX, REVERSE_BIT(pad->response[5]));
|
|
input_report_abs(input, ABS_RY, REVERSE_BIT(pad->response[6]));
|
|
input_report_key(input, BTN_DPAD_UP, b_rsp3 & BIT(3));
|
|
input_report_key(input, BTN_DPAD_DOWN, b_rsp3 & BIT(1));
|
|
input_report_key(input, BTN_DPAD_LEFT, b_rsp3 & BIT(0));
|
|
input_report_key(input, BTN_DPAD_RIGHT, b_rsp3 & BIT(2));
|
|
input_report_key(input, BTN_X, b_rsp4 & BIT(3));
|
|
input_report_key(input, BTN_A, b_rsp4 & BIT(2));
|
|
input_report_key(input, BTN_B, b_rsp4 & BIT(1));
|
|
input_report_key(input, BTN_Y, b_rsp4 & BIT(0));
|
|
input_report_key(input, BTN_TL, b_rsp4 & BIT(5));
|
|
input_report_key(input, BTN_TR, b_rsp4 & BIT(4));
|
|
input_report_key(input, BTN_TL2, b_rsp4 & BIT(7));
|
|
input_report_key(input, BTN_TR2, b_rsp4 & BIT(6));
|
|
input_report_key(input, BTN_THUMBL, b_rsp3 & BIT(6));
|
|
input_report_key(input, BTN_THUMBR, b_rsp3 & BIT(5));
|
|
input_report_key(input, BTN_SELECT, b_rsp3 & BIT(7));
|
|
input_report_key(input, BTN_START, b_rsp3 & BIT(4));
|
|
break;
|
|
|
|
case 0x82: /* 0x41 : digital */
|
|
/* button data is inverted */
|
|
b_rsp3 = ~pad->response[3];
|
|
b_rsp4 = ~pad->response[4];
|
|
|
|
input_report_abs(input, ABS_X, 0x80);
|
|
input_report_abs(input, ABS_Y, 0x80);
|
|
input_report_abs(input, ABS_RX, 0x80);
|
|
input_report_abs(input, ABS_RY, 0x80);
|
|
input_report_key(input, BTN_DPAD_UP, b_rsp3 & BIT(3));
|
|
input_report_key(input, BTN_DPAD_DOWN, b_rsp3 & BIT(1));
|
|
input_report_key(input, BTN_DPAD_LEFT, b_rsp3 & BIT(0));
|
|
input_report_key(input, BTN_DPAD_RIGHT, b_rsp3 & BIT(2));
|
|
input_report_key(input, BTN_X, b_rsp4 & BIT(3));
|
|
input_report_key(input, BTN_A, b_rsp4 & BIT(2));
|
|
input_report_key(input, BTN_B, b_rsp4 & BIT(1));
|
|
input_report_key(input, BTN_Y, b_rsp4 & BIT(0));
|
|
input_report_key(input, BTN_TL, b_rsp4 & BIT(5));
|
|
input_report_key(input, BTN_TR, b_rsp4 & BIT(4));
|
|
input_report_key(input, BTN_TL2, b_rsp4 & BIT(7));
|
|
input_report_key(input, BTN_TR2, b_rsp4 & BIT(6));
|
|
input_report_key(input, BTN_THUMBL, false);
|
|
input_report_key(input, BTN_THUMBR, false);
|
|
input_report_key(input, BTN_SELECT, b_rsp3 & BIT(7));
|
|
input_report_key(input, BTN_START, b_rsp3 & BIT(4));
|
|
break;
|
|
}
|
|
|
|
input_sync(input);
|
|
}
|
|
|
|
static int psxpad_spi_probe(struct spi_device *spi)
|
|
{
|
|
struct psxpad *pad;
|
|
struct input_dev *idev;
|
|
int err;
|
|
|
|
pad = devm_kzalloc(&spi->dev, sizeof(struct psxpad), GFP_KERNEL);
|
|
if (!pad)
|
|
return -ENOMEM;
|
|
|
|
idev = devm_input_allocate_device(&spi->dev);
|
|
if (!idev) {
|
|
dev_err(&spi->dev, "failed to allocate input device\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/* input poll device settings */
|
|
pad->idev = idev;
|
|
pad->spi = spi;
|
|
|
|
/* input device settings */
|
|
input_set_drvdata(idev, pad);
|
|
|
|
idev->name = "PlayStation 1/2 joypad";
|
|
snprintf(pad->phys, sizeof(pad->phys), "%s/input", dev_name(&spi->dev));
|
|
idev->id.bustype = BUS_SPI;
|
|
|
|
idev->open = psxpad_spi_poll_open;
|
|
idev->close = psxpad_spi_poll_close;
|
|
|
|
/* key/value map settings */
|
|
input_set_abs_params(idev, ABS_X, 0, 255, 0, 0);
|
|
input_set_abs_params(idev, ABS_Y, 0, 255, 0, 0);
|
|
input_set_abs_params(idev, ABS_RX, 0, 255, 0, 0);
|
|
input_set_abs_params(idev, ABS_RY, 0, 255, 0, 0);
|
|
input_set_capability(idev, EV_KEY, BTN_DPAD_UP);
|
|
input_set_capability(idev, EV_KEY, BTN_DPAD_DOWN);
|
|
input_set_capability(idev, EV_KEY, BTN_DPAD_LEFT);
|
|
input_set_capability(idev, EV_KEY, BTN_DPAD_RIGHT);
|
|
input_set_capability(idev, EV_KEY, BTN_A);
|
|
input_set_capability(idev, EV_KEY, BTN_B);
|
|
input_set_capability(idev, EV_KEY, BTN_X);
|
|
input_set_capability(idev, EV_KEY, BTN_Y);
|
|
input_set_capability(idev, EV_KEY, BTN_TL);
|
|
input_set_capability(idev, EV_KEY, BTN_TR);
|
|
input_set_capability(idev, EV_KEY, BTN_TL2);
|
|
input_set_capability(idev, EV_KEY, BTN_TR2);
|
|
input_set_capability(idev, EV_KEY, BTN_THUMBL);
|
|
input_set_capability(idev, EV_KEY, BTN_THUMBR);
|
|
input_set_capability(idev, EV_KEY, BTN_SELECT);
|
|
input_set_capability(idev, EV_KEY, BTN_START);
|
|
|
|
err = psxpad_spi_init_ff(pad);
|
|
if (err)
|
|
return err;
|
|
|
|
/* SPI settings */
|
|
spi->mode = SPI_MODE_3;
|
|
spi->bits_per_word = 8;
|
|
/* (PlayStation 1/2 joypad might be possible works 250kHz/500kHz) */
|
|
spi->controller->min_speed_hz = 125000;
|
|
spi->controller->max_speed_hz = 125000;
|
|
spi_setup(spi);
|
|
|
|
/* pad settings */
|
|
psxpad_set_motor_level(pad, 0, 0);
|
|
|
|
|
|
err = input_setup_polling(idev, psxpad_spi_poll);
|
|
if (err) {
|
|
dev_err(&spi->dev, "failed to set up polling: %d\n", err);
|
|
return err;
|
|
}
|
|
|
|
/* poll interval is about 60fps */
|
|
input_set_poll_interval(idev, 16);
|
|
input_set_min_poll_interval(idev, 8);
|
|
input_set_max_poll_interval(idev, 32);
|
|
|
|
/* register input poll device */
|
|
err = input_register_device(idev);
|
|
if (err) {
|
|
dev_err(&spi->dev,
|
|
"failed to register input device: %d\n", err);
|
|
return err;
|
|
}
|
|
|
|
pm_runtime_enable(&spi->dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int psxpad_spi_suspend(struct device *dev)
|
|
{
|
|
struct spi_device *spi = to_spi_device(dev);
|
|
struct psxpad *pad = spi_get_drvdata(spi);
|
|
|
|
psxpad_set_motor_level(pad, 0, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static DEFINE_SIMPLE_DEV_PM_OPS(psxpad_spi_pm, psxpad_spi_suspend, NULL);
|
|
|
|
static const struct spi_device_id psxpad_spi_id[] = {
|
|
{ "psxpad-spi", 0 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(spi, psxpad_spi_id);
|
|
|
|
static struct spi_driver psxpad_spi_driver = {
|
|
.driver = {
|
|
.name = "psxpad-spi",
|
|
.pm = pm_sleep_ptr(&psxpad_spi_pm),
|
|
},
|
|
.id_table = psxpad_spi_id,
|
|
.probe = psxpad_spi_probe,
|
|
};
|
|
|
|
module_spi_driver(psxpad_spi_driver);
|
|
|
|
MODULE_AUTHOR("Tomohiro Yoshidomi <sylph23k@gmail.com>");
|
|
MODULE_DESCRIPTION("PlayStation 1/2 joypads via SPI interface Driver");
|
|
MODULE_LICENSE("GPL");
|