1111 lines
		
	
	
		
			25 KiB
		
	
	
	
		
			Plaintext
		
	
	
	
	
	
			
		
		
	
	
			1111 lines
		
	
	
		
			25 KiB
		
	
	
	
		
			Plaintext
		
	
	
	
	
	
| // SPDX-License-Identifier: GPL-2.0
 | |
| /*
 | |
|  * Google Peach Pit Rev 6+ board device tree source
 | |
|  *
 | |
|  * Copyright (c) 2014 Google, Inc
 | |
|  */
 | |
| 
 | |
| /dts-v1/;
 | |
| #include <dt-bindings/input/input.h>
 | |
| #include <dt-bindings/gpio/gpio.h>
 | |
| #include <dt-bindings/interrupt-controller/irq.h>
 | |
| #include <dt-bindings/clock/maxim,max77802.h>
 | |
| #include <dt-bindings/regulator/maxim,max77802.h>
 | |
| #include <dt-bindings/sound/samsung-i2s.h>
 | |
| #include "exynos5420.dtsi"
 | |
| #include "exynos5420-cpus.dtsi"
 | |
| 
 | |
| / {
 | |
| 	model = "Google Peach Pit Rev 6+";
 | |
| 
 | |
| 	compatible = "google,pit-rev16",
 | |
| 		"google,pit-rev15", "google,pit-rev14",
 | |
| 		"google,pit-rev13", "google,pit-rev12",
 | |
| 		"google,pit-rev11", "google,pit-rev10",
 | |
| 		"google,pit-rev9", "google,pit-rev8",
 | |
| 		"google,pit-rev7", "google,pit-rev6",
 | |
| 		"google,pit", "google,peach","samsung,exynos5420",
 | |
| 		"samsung,exynos5";
 | |
| 
 | |
| 	aliases {
 | |
| 		/* Assign 20 so we don't get confused w/ builtin ones */
 | |
| 		i2c20 = &i2c_tunnel;
 | |
| 	};
 | |
| 
 | |
| 	backlight: backlight {
 | |
| 		compatible = "pwm-backlight";
 | |
| 		pwms = <&pwm 0 1000000 0>;
 | |
| 		brightness-levels = <0 100 500 1000 1500 2000 2500 2800>;
 | |
| 		default-brightness-level = <7>;
 | |
| 		power-supply = <&tps65090_fet1>;
 | |
| 		pinctrl-0 = <&pwm0_out>;
 | |
| 		pinctrl-names = "default";
 | |
| 	};
 | |
| 
 | |
| 	chosen {
 | |
| 		stdout-path = "serial3:115200n8";
 | |
| 	};
 | |
| 
 | |
| 	fixed-rate-clocks {
 | |
| 		oscclk {
 | |
| 			compatible = "samsung,exynos5420-oscclk";
 | |
| 			clock-frequency = <24000000>;
 | |
| 		};
 | |
| 	};
 | |
| 
 | |
| 	gpio-keys {
 | |
| 		compatible = "gpio-keys";
 | |
| 
 | |
| 		pinctrl-names = "default";
 | |
| 		pinctrl-0 = <&power_key_irq &lid_irq>;
 | |
| 
 | |
| 		power {
 | |
| 			label = "Power";
 | |
| 			gpios = <&gpx1 2 GPIO_ACTIVE_LOW>;
 | |
| 			linux,code = <KEY_POWER>;
 | |
| 			wakeup-source;
 | |
| 		};
 | |
| 
 | |
| 		lid-switch {
 | |
| 			label = "Lid";
 | |
| 			gpios = <&gpx3 4 GPIO_ACTIVE_LOW>;
 | |
| 			linux,input-type = <5>; /* EV_SW */
 | |
| 			linux,code = <0>; /* SW_LID */
 | |
| 			debounce-interval = <1>;
 | |
| 			wakeup-source;
 | |
| 		};
 | |
| 	};
 | |
| 
 | |
| 	memory@20000000 {
 | |
| 		device_type = "memory";
 | |
| 		reg = <0x20000000 0x80000000>;
 | |
| 	};
 | |
| 
 | |
| 	sound {
 | |
| 		compatible = "google,snow-audio-max98090";
 | |
| 
 | |
| 		samsung,model = "Peach-Pit-I2S-MAX98090";
 | |
| 		samsung,i2s-controller = <&i2s0>;
 | |
| 		samsung,audio-codec = <&max98090>;
 | |
| 
 | |
| 		cpu {
 | |
| 			sound-dai = <&i2s0 0>;
 | |
| 		};
 | |
| 
 | |
| 		codec {
 | |
| 			sound-dai = <&max98090>, <&hdmi>;
 | |
| 		};
 | |
| 	};
 | |
| 
 | |
| 	usb300_vbus_reg: regulator-usb300 {
 | |
| 		compatible = "regulator-fixed";
 | |
| 		regulator-name = "P5.0V_USB3CON0";
 | |
| 		regulator-min-microvolt = <5000000>;
 | |
| 		regulator-max-microvolt = <5000000>;
 | |
| 		gpio = <&gph0 0 GPIO_ACTIVE_HIGH>;
 | |
| 		pinctrl-names = "default";
 | |
| 		pinctrl-0 = <&usb300_vbus_en>;
 | |
| 		enable-active-high;
 | |
| 	};
 | |
| 
 | |
| 	usb301_vbus_reg: regulator-usb301 {
 | |
| 		compatible = "regulator-fixed";
 | |
| 		regulator-name = "P5.0V_USB3CON1";
 | |
| 		regulator-min-microvolt = <5000000>;
 | |
| 		regulator-max-microvolt = <5000000>;
 | |
| 		gpio = <&gph0 1 GPIO_ACTIVE_HIGH>;
 | |
| 		pinctrl-names = "default";
 | |
| 		pinctrl-0 = <&usb301_vbus_en>;
 | |
| 		enable-active-high;
 | |
| 	};
 | |
| 
 | |
| 	vbat: fixed-regulator {
 | |
| 		compatible = "regulator-fixed";
 | |
| 		regulator-name = "vbat-supply";
 | |
| 		regulator-boot-on;
 | |
| 		regulator-always-on;
 | |
| 	};
 | |
| 
 | |
| 	panel: panel {
 | |
| 		compatible = "auo,b116xw03";
 | |
| 		power-supply = <&tps65090_fet6>;
 | |
| 		backlight = <&backlight>;
 | |
| 
 | |
| 		port {
 | |
| 			panel_in: endpoint {
 | |
| 				remote-endpoint = <&bridge_out>;
 | |
| 			};
 | |
| 		};
 | |
| 	};
 | |
| 
 | |
| 	mmc1_pwrseq: mmc1_pwrseq {
 | |
| 		compatible = "mmc-pwrseq-simple";
 | |
| 		reset-gpios = <&gpx0 0 GPIO_ACTIVE_LOW>; /* WIFI_EN */
 | |
| 		clocks = <&max77802 MAX77802_CLK_32K_CP>;
 | |
| 		clock-names = "ext_clock";
 | |
| 	};
 | |
| };
 | |
| 
 | |
| &adc {
 | |
| 	status = "okay";
 | |
| 	vdd-supply = <&ldo9_reg>;
 | |
| };
 | |
| 
 | |
| &clock_audss {
 | |
| 	assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>;
 | |
| 	assigned-clock-parents = <&clock CLK_FOUT_EPLL>;
 | |
| };
 | |
| 
 | |
| &cpu0 {
 | |
| 	cpu-supply = <&buck2_reg>;
 | |
| };
 | |
| 
 | |
| &cpu4 {
 | |
| 	cpu-supply = <&buck6_reg>;
 | |
| };
 | |
| 
 | |
| &dp {
 | |
| 	status = "okay";
 | |
| 	pinctrl-names = "default";
 | |
| 	pinctrl-0 = <&dp_hpd_gpio>;
 | |
| 	samsung,color-space = <0>;
 | |
| 	samsung,color-depth = <1>;
 | |
| 	samsung,link-rate = <0x06>;
 | |
| 	samsung,lane-count = <2>;
 | |
| 	hpd-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>;
 | |
| 
 | |
| 	ports {
 | |
| 		port {
 | |
| 			dp_out: endpoint {
 | |
| 				remote-endpoint = <&bridge_in>;
 | |
| 			};
 | |
| 		};
 | |
| 	};
 | |
| };
 | |
| 
 | |
| &fimd {
 | |
| 	status = "okay";
 | |
| 	samsung,invert-vclk;
 | |
| };
 | |
| 
 | |
| &hdmi {
 | |
| 	status = "okay";
 | |
| 	hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>;
 | |
| 	pinctrl-names = "default";
 | |
| 	pinctrl-0 = <&hdmi_hpd_irq>;
 | |
| 	ddc = <&i2c_2>;
 | |
| 
 | |
| 	hdmi-en-supply = <&tps65090_fet7>;
 | |
| 	vdd-supply = <&ldo8_reg>;
 | |
| 	vdd_osc-supply = <&ldo10_reg>;
 | |
| 	vdd_pll-supply = <&ldo8_reg>;
 | |
| };
 | |
| 
 | |
| &hsi2c_4 {
 | |
| 	status = "okay";
 | |
| 	clock-frequency = <400000>;
 | |
| 
 | |
| 	max77802: max77802-pmic@9 {
 | |
| 		compatible = "maxim,max77802";
 | |
| 		interrupt-parent = <&gpx3>;
 | |
| 		interrupts = <1 IRQ_TYPE_NONE>;
 | |
| 		pinctrl-names = "default";
 | |
| 		pinctrl-0 = <&max77802_irq>, <&pmic_selb>,
 | |
| 			    <&pmic_dvs_1>, <&pmic_dvs_2>, <&pmic_dvs_3>;
 | |
| 		wakeup-source;
 | |
| 		reg = <0x9>;
 | |
| 		#clock-cells = <1>;
 | |
| 
 | |
| 		inb1-supply = <&tps65090_dcdc2>;
 | |
| 		inb2-supply = <&tps65090_dcdc1>;
 | |
| 		inb3-supply = <&tps65090_dcdc2>;
 | |
| 		inb4-supply = <&tps65090_dcdc2>;
 | |
| 		inb5-supply = <&tps65090_dcdc1>;
 | |
| 		inb6-supply = <&tps65090_dcdc2>;
 | |
| 		inb7-supply = <&tps65090_dcdc1>;
 | |
| 		inb8-supply = <&tps65090_dcdc1>;
 | |
| 		inb9-supply = <&tps65090_dcdc1>;
 | |
| 		inb10-supply = <&tps65090_dcdc1>;
 | |
| 
 | |
| 		inl1-supply = <&buck5_reg>;
 | |
| 		inl2-supply = <&buck7_reg>;
 | |
| 		inl3-supply = <&buck9_reg>;
 | |
| 		inl4-supply = <&buck9_reg>;
 | |
| 		inl5-supply = <&buck9_reg>;
 | |
| 		inl6-supply = <&tps65090_dcdc2>;
 | |
| 		inl7-supply = <&buck9_reg>;
 | |
| 		inl9-supply = <&tps65090_dcdc2>;
 | |
| 		inl10-supply = <&buck7_reg>;
 | |
| 
 | |
| 		regulators {
 | |
| 			buck1_reg: BUCK1 {
 | |
| 				regulator-name = "vdd_mif";
 | |
| 				regulator-min-microvolt = <800000>;
 | |
| 				regulator-max-microvolt = <1300000>;
 | |
| 				regulator-always-on;
 | |
| 				regulator-boot-on;
 | |
| 				regulator-ramp-delay = <12500>;
 | |
| 				regulator-state-mem {
 | |
| 					regulator-off-in-suspend;
 | |
| 				};
 | |
| 			};
 | |
| 
 | |
| 			buck2_reg: BUCK2 {
 | |
| 				regulator-name = "vdd_arm";
 | |
| 				regulator-min-microvolt = <800000>;
 | |
| 				regulator-max-microvolt = <1500000>;
 | |
| 				regulator-always-on;
 | |
| 				regulator-boot-on;
 | |
| 				regulator-ramp-delay = <12500>;
 | |
| 				regulator-state-mem {
 | |
| 					regulator-off-in-suspend;
 | |
| 				};
 | |
| 			};
 | |
| 
 | |
| 			buck3_reg: BUCK3 {
 | |
| 				regulator-name = "vdd_int";
 | |
| 				regulator-min-microvolt = <800000>;
 | |
| 				regulator-max-microvolt = <1400000>;
 | |
| 				regulator-always-on;
 | |
| 				regulator-boot-on;
 | |
| 				regulator-ramp-delay = <12500>;
 | |
| 				regulator-state-mem {
 | |
| 					regulator-off-in-suspend;
 | |
| 				};
 | |
| 			};
 | |
| 
 | |
| 			buck4_reg: BUCK4 {
 | |
| 				regulator-name = "vdd_g3d";
 | |
| 				regulator-min-microvolt = <700000>;
 | |
| 				regulator-max-microvolt = <1400000>;
 | |
| 				regulator-always-on;
 | |
| 				regulator-boot-on;
 | |
| 				regulator-ramp-delay = <12500>;
 | |
| 				regulator-state-mem {
 | |
| 					regulator-off-in-suspend;
 | |
| 				};
 | |
| 			};
 | |
| 
 | |
| 			buck5_reg: BUCK5 {
 | |
| 				regulator-name = "vdd_1v2";
 | |
| 				regulator-min-microvolt = <1200000>;
 | |
| 				regulator-max-microvolt = <1200000>;
 | |
| 				regulator-boot-on;
 | |
| 				regulator-state-mem {
 | |
| 					regulator-off-in-suspend;
 | |
| 				};
 | |
| 			};
 | |
| 
 | |
| 			buck6_reg: BUCK6 {
 | |
| 				regulator-name = "vdd_kfc";
 | |
| 				regulator-min-microvolt = <800000>;
 | |
| 				regulator-max-microvolt = <1500000>;
 | |
| 				regulator-always-on;
 | |
| 				regulator-boot-on;
 | |
| 				regulator-ramp-delay = <12500>;
 | |
| 				regulator-state-mem {
 | |
| 					regulator-off-in-suspend;
 | |
| 				};
 | |
| 			};
 | |
| 
 | |
| 			buck7_reg: BUCK7 {
 | |
| 				regulator-name = "vdd_1v35";
 | |
| 				regulator-min-microvolt = <1350000>;
 | |
| 				regulator-max-microvolt = <1350000>;
 | |
| 				regulator-boot-on;
 | |
| 				regulator-state-mem {
 | |
| 					regulator-on-in-suspend;
 | |
| 				};
 | |
| 			};
 | |
| 
 | |
| 			buck8_reg: BUCK8 {
 | |
| 				regulator-name = "vdd_emmc";
 | |
| 				regulator-min-microvolt = <2850000>;
 | |
| 				regulator-max-microvolt = <2850000>;
 | |
| 				regulator-always-on;
 | |
| 				regulator-boot-on;
 | |
| 				regulator-state-mem {
 | |
| 					regulator-off-in-suspend;
 | |
| 				};
 | |
| 			};
 | |
| 
 | |
| 			buck9_reg: BUCK9 {
 | |
| 				regulator-name = "vdd_2v";
 | |
| 				regulator-min-microvolt = <2000000>;
 | |
| 				regulator-max-microvolt = <2000000>;
 | |
| 				regulator-boot-on;
 | |
| 				regulator-state-mem {
 | |
| 					regulator-on-in-suspend;
 | |
| 				};
 | |
| 			};
 | |
| 
 | |
| 			buck10_reg: BUCK10 {
 | |
| 				regulator-name = "vdd_1v8";
 | |
| 				regulator-min-microvolt = <1800000>;
 | |
| 				regulator-max-microvolt = <1800000>;
 | |
| 				regulator-boot-on;
 | |
| 				regulator-state-mem {
 | |
| 					regulator-on-in-suspend;
 | |
| 				};
 | |
| 			};
 | |
| 
 | |
| 			ldo1_reg: LDO1 {
 | |
| 				regulator-name = "vdd_1v0";
 | |
| 				regulator-min-microvolt = <1000000>;
 | |
| 				regulator-max-microvolt = <1000000>;
 | |
| 				regulator-always-on;
 | |
| 				regulator-state-mem {
 | |
| 					regulator-on-in-suspend;
 | |
| 					regulator-mode = <MAX77802_OPMODE_LP>;
 | |
| 				};
 | |
| 			};
 | |
| 
 | |
| 			ldo2_reg: LDO2 {
 | |
| 				regulator-name = "vdd_1v2_2";
 | |
| 				regulator-min-microvolt = <1200000>;
 | |
| 				regulator-max-microvolt = <1200000>;
 | |
| 			};
 | |
| 
 | |
| 			ldo3_reg: LDO3 {
 | |
| 				regulator-name = "vdd_1v8_3";
 | |
| 				regulator-min-microvolt = <1800000>;
 | |
| 				regulator-max-microvolt = <1800000>;
 | |
| 				regulator-always-on;
 | |
| 				regulator-state-mem {
 | |
| 					regulator-on-in-suspend;
 | |
| 					regulator-mode = <MAX77802_OPMODE_LP>;
 | |
| 				};
 | |
| 			};
 | |
| 
 | |
| 			vqmmc_sdcard: ldo4_reg: LDO4 {
 | |
| 				regulator-name = "vdd_sd";
 | |
| 				regulator-min-microvolt = <1800000>;
 | |
| 				regulator-max-microvolt = <2800000>;
 | |
| 				regulator-always-on;
 | |
| 				regulator-state-mem {
 | |
| 					regulator-off-in-suspend;
 | |
| 				};
 | |
| 			};
 | |
| 
 | |
| 			ldo5_reg: LDO5 {
 | |
| 				regulator-name = "vdd_1v8_5";
 | |
| 				regulator-min-microvolt = <1800000>;
 | |
| 				regulator-max-microvolt = <1800000>;
 | |
| 				regulator-always-on;
 | |
| 				regulator-state-mem {
 | |
| 					regulator-off-in-suspend;
 | |
| 				};
 | |
| 			};
 | |
| 
 | |
| 			ldo6_reg: LDO6 {
 | |
| 				regulator-name = "vdd_1v8_6";
 | |
| 				regulator-min-microvolt = <1800000>;
 | |
| 				regulator-max-microvolt = <1800000>;
 | |
| 				regulator-always-on;
 | |
| 				regulator-state-mem {
 | |
| 					regulator-off-in-suspend;
 | |
| 				};
 | |
| 			};
 | |
| 
 | |
| 			ldo7_reg: LDO7 {
 | |
| 				regulator-name = "vdd_1v8_7";
 | |
| 				regulator-min-microvolt = <1800000>;
 | |
| 				regulator-max-microvolt = <1800000>;
 | |
| 			};
 | |
| 
 | |
| 			ldo8_reg: LDO8 {
 | |
| 				regulator-name = "vdd_ldo8";
 | |
| 				regulator-min-microvolt = <1000000>;
 | |
| 				regulator-max-microvolt = <1000000>;
 | |
| 				regulator-always-on;
 | |
| 				regulator-state-mem {
 | |
| 					regulator-off-in-suspend;
 | |
| 				};
 | |
| 			};
 | |
| 
 | |
| 			ldo9_reg: LDO9 {
 | |
| 				regulator-name = "vdd_ldo9";
 | |
| 				regulator-min-microvolt = <1800000>;
 | |
| 				regulator-max-microvolt = <1800000>;
 | |
| 				regulator-state-mem {
 | |
| 					regulator-on-in-suspend;
 | |
| 					regulator-mode = <MAX77802_OPMODE_LP>;
 | |
| 				};
 | |
| 			};
 | |
| 
 | |
| 			ldo10_reg: LDO10 {
 | |
| 				regulator-name = "vdd_ldo10";
 | |
| 				regulator-min-microvolt = <1800000>;
 | |
| 				regulator-max-microvolt = <1800000>;
 | |
| 				regulator-state-mem {
 | |
| 					regulator-off-in-suspend;
 | |
| 				};
 | |
| 			};
 | |
| 
 | |
| 			ldo11_reg: LDO11 {
 | |
| 				regulator-name = "vdd_ldo11";
 | |
| 				regulator-min-microvolt = <1800000>;
 | |
| 				regulator-max-microvolt = <1800000>;
 | |
| 				regulator-always-on;
 | |
| 				regulator-state-mem {
 | |
| 					regulator-on-in-suspend;
 | |
| 					regulator-mode = <MAX77802_OPMODE_LP>;
 | |
| 				};
 | |
| 			};
 | |
| 
 | |
| 			ldo12_reg: LDO12 {
 | |
| 				regulator-name = "vdd_ldo12";
 | |
| 				regulator-min-microvolt = <3000000>;
 | |
| 				regulator-max-microvolt = <3000000>;
 | |
| 				regulator-always-on;
 | |
| 				regulator-state-mem {
 | |
| 					regulator-off-in-suspend;
 | |
| 				};
 | |
| 			};
 | |
| 
 | |
| 			ldo13_reg: LDO13 {
 | |
| 				regulator-name = "vdd_ldo13";
 | |
| 				regulator-min-microvolt = <1800000>;
 | |
| 				regulator-max-microvolt = <1800000>;
 | |
| 				regulator-always-on;
 | |
| 				regulator-state-mem {
 | |
| 					regulator-on-in-suspend;
 | |
| 					regulator-mode = <MAX77802_OPMODE_LP>;
 | |
| 				};
 | |
| 			};
 | |
| 
 | |
| 			ldo14_reg: LDO14 {
 | |
| 				regulator-name = "vdd_ldo14";
 | |
| 				regulator-min-microvolt = <1800000>;
 | |
| 				regulator-max-microvolt = <1800000>;
 | |
| 				regulator-always-on;
 | |
| 				regulator-state-mem {
 | |
| 					regulator-off-in-suspend;
 | |
| 				};
 | |
| 			};
 | |
| 
 | |
| 			ldo15_reg: LDO15 {
 | |
| 				regulator-name = "vdd_ldo15";
 | |
| 				regulator-min-microvolt = <1000000>;
 | |
| 				regulator-max-microvolt = <1000000>;
 | |
| 				regulator-always-on;
 | |
| 				regulator-state-mem {
 | |
| 					regulator-off-in-suspend;
 | |
| 				};
 | |
| 			};
 | |
| 
 | |
| 			ldo17_reg: LDO17 {
 | |
| 				regulator-name = "vdd_g3ds";
 | |
| 				regulator-min-microvolt = <900000>;
 | |
| 				regulator-max-microvolt = <1400000>;
 | |
| 				regulator-always-on;
 | |
| 				regulator-state-mem {
 | |
| 					regulator-off-in-suspend;
 | |
| 				};
 | |
| 			};
 | |
| 
 | |
| 			ldo18_reg: LDO18 {
 | |
| 				regulator-name = "ldo_18";
 | |
| 				regulator-min-microvolt = <1800000>;
 | |
| 				regulator-max-microvolt = <1800000>;
 | |
| 			};
 | |
| 
 | |
| 			ldo19_reg: LDO19 {
 | |
| 				regulator-name = "ldo_19";
 | |
| 				regulator-min-microvolt = <1800000>;
 | |
| 				regulator-max-microvolt = <1800000>;
 | |
| 			};
 | |
| 
 | |
| 			ldo20_reg: LDO20 {
 | |
| 				regulator-name = "ldo_20";
 | |
| 				regulator-min-microvolt = <1800000>;
 | |
| 				regulator-max-microvolt = <1800000>;
 | |
| 				regulator-always-on;
 | |
| 			};
 | |
| 
 | |
| 			ldo21_reg: LDO21 {
 | |
| 				regulator-name = "ldo_21";
 | |
| 				regulator-min-microvolt = <2800000>;
 | |
| 				regulator-max-microvolt = <2800000>;
 | |
| 			};
 | |
| 
 | |
| 			ldo23_reg: LDO23 {
 | |
| 				regulator-name = "ldo_23";
 | |
| 				regulator-min-microvolt = <3300000>;
 | |
| 				regulator-max-microvolt = <3300000>;
 | |
| 			};
 | |
| 			ldo24_reg: LDO24 {
 | |
| 				regulator-name = "ldo_24";
 | |
| 				regulator-min-microvolt = <2800000>;
 | |
| 				regulator-max-microvolt = <2800000>;
 | |
| 			};
 | |
| 
 | |
| 			ldo25_reg: LDO25 {
 | |
| 				regulator-name = "ldo_25";
 | |
| 				regulator-min-microvolt = <3300000>;
 | |
| 				regulator-max-microvolt = <3300000>;
 | |
| 			};
 | |
| 
 | |
| 			ldo26_reg: LDO26 {
 | |
| 				regulator-name = "ldo_26";
 | |
| 				regulator-min-microvolt = <1200000>;
 | |
| 				regulator-max-microvolt = <1200000>;
 | |
| 			};
 | |
| 
 | |
| 			ldo27_reg: LDO27 {
 | |
| 				regulator-name = "ldo_27";
 | |
| 				regulator-min-microvolt = <1200000>;
 | |
| 				regulator-max-microvolt = <1200000>;
 | |
| 			};
 | |
| 
 | |
| 			ldo28_reg: LDO28 {
 | |
| 				regulator-name = "ldo_28";
 | |
| 				regulator-min-microvolt = <1800000>;
 | |
| 				regulator-max-microvolt = <1800000>;
 | |
| 			};
 | |
| 
 | |
| 			ldo29_reg: LDO29 {
 | |
| 				regulator-name = "ldo_29";
 | |
| 				regulator-min-microvolt = <1800000>;
 | |
| 				regulator-max-microvolt = <1800000>;
 | |
| 			};
 | |
| 
 | |
| 			ldo30_reg: LDO30 {
 | |
| 				regulator-name = "vdd_mifs";
 | |
| 				regulator-min-microvolt = <1000000>;
 | |
| 				regulator-max-microvolt = <1000000>;
 | |
| 				regulator-always-on;
 | |
| 				regulator-state-mem {
 | |
| 					regulator-off-in-suspend;
 | |
| 				};
 | |
| 			};
 | |
| 
 | |
| 			ldo32_reg: LDO32 {
 | |
| 				regulator-name = "ldo_32";
 | |
| 				regulator-min-microvolt = <3000000>;
 | |
| 				regulator-max-microvolt = <3000000>;
 | |
| 			};
 | |
| 
 | |
| 			ldo33_reg: LDO33 {
 | |
| 				regulator-name = "ldo_33";
 | |
| 				regulator-min-microvolt = <2800000>;
 | |
| 				regulator-max-microvolt = <2800000>;
 | |
| 			};
 | |
| 
 | |
| 			ldo34_reg: LDO34 {
 | |
| 				regulator-name = "ldo_34";
 | |
| 				regulator-min-microvolt = <3000000>;
 | |
| 				regulator-max-microvolt = <3000000>;
 | |
| 			};
 | |
| 
 | |
| 			ldo35_reg: LDO35 {
 | |
| 				regulator-name = "ldo_35";
 | |
| 				regulator-min-microvolt = <1200000>;
 | |
| 				regulator-max-microvolt = <1200000>;
 | |
| 			};
 | |
| 		};
 | |
| 	};
 | |
| };
 | |
| 
 | |
| &hsi2c_7 {
 | |
| 	status = "okay";
 | |
| 	clock-frequency = <400000>;
 | |
| 
 | |
| 	max98090: codec@10 {
 | |
| 		compatible = "maxim,max98090";
 | |
| 		reg = <0x10>;
 | |
| 		interrupts = <2 IRQ_TYPE_NONE>;
 | |
| 		interrupt-parent = <&gpx0>;
 | |
| 		pinctrl-names = "default";
 | |
| 		pinctrl-0 = <&max98090_irq>;
 | |
| 		clocks = <&pmu_system_controller 0>;
 | |
| 		clock-names = "mclk";
 | |
| 		#sound-dai-cells = <0>;
 | |
| 	};
 | |
| 
 | |
| 	light-sensor@44 {
 | |
| 		compatible = "isil,isl29018";
 | |
| 		reg = <0x44>;
 | |
| 		vcc-supply = <&tps65090_fet5>;
 | |
| 	};
 | |
| 
 | |
| 	ps8625: lvds-bridge@48 {
 | |
| 		compatible = "parade,ps8625";
 | |
| 		reg = <0x48>;
 | |
| 		sleep-gpios = <&gpx3 5 GPIO_ACTIVE_HIGH>;
 | |
| 		reset-gpios = <&gpy7 7 GPIO_ACTIVE_HIGH>;
 | |
| 		lane-count = <2>;
 | |
| 		use-external-pwm;
 | |
| 
 | |
| 		ports {
 | |
| 			#address-cells = <1>;
 | |
| 			#size-cells = <0>;
 | |
| 
 | |
| 			port@0 {
 | |
| 				reg = <0>;
 | |
| 
 | |
| 				bridge_out: endpoint {
 | |
| 					remote-endpoint = <&panel_in>;
 | |
| 				};
 | |
| 			};
 | |
| 
 | |
| 			port@1 {
 | |
| 				reg = <1>;
 | |
| 
 | |
| 				bridge_in: endpoint {
 | |
| 					remote-endpoint = <&dp_out>;
 | |
| 				};
 | |
| 			};
 | |
| 		};
 | |
| 
 | |
| 	};
 | |
| };
 | |
| 
 | |
| &hsi2c_8 {
 | |
| 	status = "okay";
 | |
| 	clock-frequency = <333000>;
 | |
| 
 | |
| 	/* Atmel mXT336S */
 | |
| 	trackpad@4b {
 | |
| 		compatible = "atmel,maxtouch";
 | |
| 		reg = <0x4b>;
 | |
| 		interrupt-parent = <&gpx1>;
 | |
| 		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
 | |
| 		wakeup-source;
 | |
| 		pinctrl-names = "default";
 | |
| 		pinctrl-0 = <&trackpad_irq>;
 | |
| 		linux,gpio-keymap = <KEY_RESERVED
 | |
| 				     KEY_RESERVED
 | |
| 				     KEY_RESERVED	/* GPIO0 */
 | |
| 				     KEY_RESERVED	/* GPIO1 */
 | |
| 				     KEY_RESERVED	/* GPIO2 */
 | |
| 				     BTN_LEFT>;		/* GPIO3 */
 | |
| 	};
 | |
| };
 | |
| 
 | |
| &hsi2c_9 {
 | |
| 	status = "okay";
 | |
| 	clock-frequency = <400000>;
 | |
| 
 | |
| 	tpm@20 {
 | |
| 		compatible = "infineon,slb9645tt";
 | |
| 		reg = <0x20>;
 | |
| 
 | |
| 		/* Unused irq; but still need to configure the pins */
 | |
| 		pinctrl-names = "default";
 | |
| 		pinctrl-0 = <&tpm_irq>;
 | |
| 	};
 | |
| };
 | |
| 
 | |
| &i2c_2 {
 | |
| 	status = "okay";
 | |
| 	samsung,i2c-sda-delay = <100>;
 | |
| 	samsung,i2c-max-bus-freq = <66000>;
 | |
| 	samsung,i2c-slave-addr = <0x50>;
 | |
| };
 | |
| 
 | |
| &i2s0 {
 | |
| 	assigned-clocks = <&i2s0 CLK_I2S_RCLK_SRC>;
 | |
| 	assigned-clock-parents = <&clock_audss EXYNOS_I2S_BUS>;
 | |
| 	status = "okay";
 | |
| };
 | |
| 
 | |
| &mixer {
 | |
| 	status = "okay";
 | |
| };
 | |
| 
 | |
| /* eMMC flash */
 | |
| &mmc_0 {
 | |
| 	status = "okay";
 | |
| 	mmc-hs200-1_8v;
 | |
| 	cap-mmc-highspeed;
 | |
| 	non-removable;
 | |
| 	clock-frequency = <400000000>;
 | |
| 	samsung,dw-mshc-ciu-div = <3>;
 | |
| 	samsung,dw-mshc-sdr-timing = <0 4>;
 | |
| 	samsung,dw-mshc-ddr-timing = <0 2>;
 | |
| 	samsung,dw-mshc-hs400-timing = <0 2>;
 | |
| 	samsung,read-strobe-delay = <90>;
 | |
| 	pinctrl-names = "default";
 | |
| 	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_rclk>;
 | |
| 	bus-width = <8>;
 | |
| };
 | |
| 
 | |
| /* WiFi SDIO module */
 | |
| &mmc_1 {
 | |
| 	status = "okay";
 | |
| 	non-removable;
 | |
| 	cap-sdio-irq;
 | |
| 	keep-power-in-suspend;
 | |
| 	clock-frequency = <400000000>;
 | |
| 	samsung,dw-mshc-ciu-div = <1>;
 | |
| 	samsung,dw-mshc-sdr-timing = <0 1>;
 | |
| 	samsung,dw-mshc-ddr-timing = <0 2>;
 | |
| 	pinctrl-names = "default";
 | |
| 	pinctrl-0 = <&sd1_clk>, <&sd1_cmd>, <&sd1_int>, <&sd1_bus1>,
 | |
| 		    <&sd1_bus4>, <&sd1_bus8>, <&wifi_en>;
 | |
| 	bus-width = <4>;
 | |
| 	cap-sd-highspeed;
 | |
| 	mmc-pwrseq = <&mmc1_pwrseq>;
 | |
| 	vqmmc-supply = <&buck10_reg>;
 | |
| };
 | |
| 
 | |
| /* uSD card */
 | |
| &mmc_2 {
 | |
| 	status = "okay";
 | |
| 	cap-sd-highspeed;
 | |
| 	card-detect-delay = <200>;
 | |
| 	clock-frequency = <400000000>;
 | |
| 	samsung,dw-mshc-ciu-div = <3>;
 | |
| 	samsung,dw-mshc-sdr-timing = <2 3>;
 | |
| 	samsung,dw-mshc-ddr-timing = <1 2>;
 | |
| 	pinctrl-names = "default";
 | |
| 	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
 | |
| 	bus-width = <4>;
 | |
| };
 | |
| 
 | |
| 
 | |
| &pinctrl_0 {
 | |
| 	pinctrl-names = "default";
 | |
| 	pinctrl-0 = <&mask_tpm_reset>;
 | |
| 
 | |
| 	wifi_en: wifi-en {
 | |
| 		samsung,pins = "gpx0-0";
 | |
| 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 | |
| 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 | |
| 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 | |
| 	};
 | |
| 
 | |
| 	max98090_irq: max98090-irq {
 | |
| 		samsung,pins = "gpx0-2";
 | |
| 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 | |
| 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 | |
| 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 | |
| 	};
 | |
| 
 | |
| 	/* We need GPX0_6 to be low at sleep time; just keep it low always */
 | |
| 	mask_tpm_reset: mask-tpm-reset {
 | |
| 		samsung,pins = "gpx0-6";
 | |
| 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 | |
| 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 | |
| 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 | |
| 		samsung,pin-val = <0>;
 | |
| 	};
 | |
| 
 | |
| 	tpm_irq: tpm-irq {
 | |
| 		samsung,pins = "gpx1-0";
 | |
| 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 | |
| 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 | |
| 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 | |
| 	};
 | |
| 
 | |
| 	trackpad_irq: trackpad-irq {
 | |
| 		samsung,pins = "gpx1-1";
 | |
| 		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
 | |
| 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 | |
| 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 | |
| 	};
 | |
| 
 | |
| 	power_key_irq: power-key-irq {
 | |
| 		samsung,pins = "gpx1-2";
 | |
| 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 | |
| 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 | |
| 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 | |
| 	};
 | |
| 
 | |
| 	ec_irq: ec-irq {
 | |
| 		samsung,pins = "gpx1-5";
 | |
| 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 | |
| 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 | |
| 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 | |
| 	};
 | |
| 
 | |
| 	tps65090_irq: tps65090-irq {
 | |
| 		samsung,pins = "gpx2-5";
 | |
| 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 | |
| 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 | |
| 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 | |
| 	};
 | |
| 
 | |
| 	dp_hpd_gpio: dp_hpd_gpio {
 | |
| 		samsung,pins = "gpx2-6";
 | |
| 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 | |
| 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
 | |
| 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 | |
| 	};
 | |
| 
 | |
| 	max77802_irq: max77802-irq {
 | |
| 		samsung,pins = "gpx3-1";
 | |
| 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 | |
| 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 | |
| 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 | |
| 	};
 | |
| 
 | |
| 	lid_irq: lid-irq {
 | |
| 		samsung,pins = "gpx3-4";
 | |
| 		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
 | |
| 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 | |
| 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 | |
| 	};
 | |
| 
 | |
| 	hdmi_hpd_irq: hdmi-hpd-irq {
 | |
| 		samsung,pins = "gpx3-7";
 | |
| 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 | |
| 		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
 | |
| 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 | |
| 	};
 | |
| 
 | |
| 	pmic_dvs_1: pmic-dvs-1 {
 | |
| 		samsung,pins = "gpy7-6";
 | |
| 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 | |
| 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 | |
| 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 | |
| 	};
 | |
| };
 | |
| 
 | |
| &pinctrl_1 {
 | |
| 	/* Adjust WiFi drive strengths lower for EMI */
 | |
| 	sd1_clk: sd1-clk {
 | |
| 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
 | |
| 	};
 | |
| 
 | |
| 	sd1_cmd: sd1-cmd {
 | |
| 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
 | |
| 	};
 | |
| 
 | |
| 	sd1_bus1: sd1-bus-width1 {
 | |
| 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
 | |
| 	};
 | |
| 
 | |
| 	sd1_bus4: sd1-bus-width4 {
 | |
| 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
 | |
| 	};
 | |
| 
 | |
| 	sd1_bus8: sd1-bus-width8 {
 | |
| 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
 | |
| 	};
 | |
| };
 | |
| 
 | |
| &pinctrl_2 {
 | |
| 	pmic_dvs_2: pmic-dvs-2 {
 | |
| 		samsung,pins = "gpj4-2";
 | |
| 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 | |
| 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 | |
| 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 | |
| 	};
 | |
| 
 | |
| 	pmic_dvs_3: pmic-dvs-3 {
 | |
| 		samsung,pins = "gpj4-3";
 | |
| 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 | |
| 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 | |
| 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 | |
| 	};
 | |
| };
 | |
| 
 | |
| &pinctrl_3 {
 | |
| 	/* Drive SPI lines at x2 for better integrity */
 | |
| 	spi2-bus {
 | |
| 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
 | |
| 	};
 | |
| 
 | |
| 	/* Drive SPI chip select at x2 for better integrity */
 | |
| 	ec_spi_cs: ec-spi-cs {
 | |
| 		samsung,pins = "gpb1-2";
 | |
| 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 | |
| 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 | |
| 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV3>;
 | |
| 	};
 | |
| 
 | |
| 	usb300_vbus_en: usb300-vbus-en {
 | |
| 		samsung,pins = "gph0-0";
 | |
| 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 | |
| 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 | |
| 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 | |
| 	};
 | |
| 
 | |
| 	usb301_vbus_en: usb301-vbus-en {
 | |
| 		samsung,pins = "gph0-1";
 | |
| 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 | |
| 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 | |
| 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 | |
| 	};
 | |
| 
 | |
| 	pmic_selb: pmic-selb {
 | |
| 		samsung,pins = "gph0-2", "gph0-3", "gph0-4", "gph0-5",
 | |
| 			       "gph0-6";
 | |
| 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 | |
| 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 | |
| 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 | |
| 	};
 | |
| };
 | |
| 
 | |
| &pmu_system_controller {
 | |
| 	assigned-clocks = <&pmu_system_controller 0>;
 | |
| 	assigned-clock-parents = <&clock CLK_FIN_PLL>;
 | |
| };
 | |
| 
 | |
| &rtc {
 | |
| 	status = "okay";
 | |
| 	clocks = <&clock CLK_RTC>, <&max77802 MAX77802_CLK_32K_AP>;
 | |
| 	clock-names = "rtc", "rtc_src";
 | |
| };
 | |
| 
 | |
| &spi_2 {
 | |
| 	status = "okay";
 | |
| 	num-cs = <1>;
 | |
| 	samsung,spi-src-clk = <0>;
 | |
| 	cs-gpios = <&gpb1 2 GPIO_ACTIVE_HIGH>;
 | |
| 
 | |
| 	cros_ec: cros-ec@0 {
 | |
| 		compatible = "google,cros-ec-spi";
 | |
| 		interrupt-parent = <&gpx1>;
 | |
| 		interrupts = <5 IRQ_TYPE_NONE>;
 | |
| 		pinctrl-names = "default";
 | |
| 		pinctrl-0 = <&ec_spi_cs &ec_irq>;
 | |
| 		reg = <0>;
 | |
| 		spi-max-frequency = <3125000>;
 | |
| 		google,has-vbc-nvram;
 | |
| 
 | |
| 		controller-data {
 | |
| 			samsung,spi-feedback-delay = <1>;
 | |
| 		};
 | |
| 
 | |
| 		i2c_tunnel: i2c-tunnel {
 | |
| 			compatible = "google,cros-ec-i2c-tunnel";
 | |
| 			#address-cells = <1>;
 | |
| 			#size-cells = <0>;
 | |
| 			google,remote-bus = <0>;
 | |
| 
 | |
| 			battery: sbs-battery@b {
 | |
| 				compatible = "sbs,sbs-battery";
 | |
| 				reg = <0xb>;
 | |
| 				sbs,poll-retry-count = <1>;
 | |
| 				sbs,i2c-retry-count = <2>;
 | |
| 			};
 | |
| 
 | |
| 			power-regulator@48 {
 | |
| 				compatible = "ti,tps65090";
 | |
| 				reg = <0x48>;
 | |
| 
 | |
| 				/*
 | |
| 				 * Config irq to disable internal pulls
 | |
| 				 * even though we run in polling mode.
 | |
| 				 */
 | |
| 				pinctrl-names = "default";
 | |
| 				pinctrl-0 = <&tps65090_irq>;
 | |
| 
 | |
| 				vsys1-supply = <&vbat>;
 | |
| 				vsys2-supply = <&vbat>;
 | |
| 				vsys3-supply = <&vbat>;
 | |
| 				infet1-supply = <&vbat>;
 | |
| 				infet2-supply = <&tps65090_dcdc1>;
 | |
| 				infet3-supply = <&tps65090_dcdc2>;
 | |
| 				infet4-supply = <&tps65090_dcdc2>;
 | |
| 				infet5-supply = <&tps65090_dcdc2>;
 | |
| 				infet6-supply = <&tps65090_dcdc2>;
 | |
| 				infet7-supply = <&tps65090_dcdc1>;
 | |
| 				vsys-l1-supply = <&vbat>;
 | |
| 				vsys-l2-supply = <&vbat>;
 | |
| 
 | |
| 				regulators {
 | |
| 					tps65090_dcdc1: dcdc1 {
 | |
| 						ti,enable-ext-control;
 | |
| 					};
 | |
| 					tps65090_dcdc2: dcdc2 {
 | |
| 						ti,enable-ext-control;
 | |
| 					};
 | |
| 					tps65090_dcdc3: dcdc3 {
 | |
| 						ti,enable-ext-control;
 | |
| 					};
 | |
| 					tps65090_fet1: fet1 {
 | |
| 						regulator-name = "vcd_led";
 | |
| 					};
 | |
| 					tps65090_fet2: fet2 {
 | |
| 						regulator-name = "video_mid";
 | |
| 						regulator-always-on;
 | |
| 					};
 | |
| 					tps65090_fet3: fet3 {
 | |
| 						regulator-name = "wwan_r";
 | |
| 						regulator-always-on;
 | |
| 					};
 | |
| 					tps65090_fet4: fet4 {
 | |
| 						regulator-name = "sdcard";
 | |
| 						regulator-always-on;
 | |
| 					};
 | |
| 					tps65090_fet5: fet5 {
 | |
| 						regulator-name = "camout";
 | |
| 						regulator-always-on;
 | |
| 					};
 | |
| 					tps65090_fet6: fet6 {
 | |
| 						regulator-name = "lcd_vdd";
 | |
| 					};
 | |
| 					tps65090_fet7: fet7 {
 | |
| 						regulator-name = "video_mid_1a";
 | |
| 						regulator-always-on;
 | |
| 					};
 | |
| 					tps65090_ldo1: ldo1 {
 | |
| 					};
 | |
| 					tps65090_ldo2: ldo2 {
 | |
| 					};
 | |
| 				};
 | |
| 
 | |
| 				charger {
 | |
| 					compatible = "ti,tps65090-charger";
 | |
| 				};
 | |
| 			};
 | |
| 		};
 | |
| 	};
 | |
| };
 | |
| 
 | |
| &serial_3 {
 | |
| 	status = "okay";
 | |
| };
 | |
| 
 | |
| &tmu_cpu0 {
 | |
| 	vtmu-supply = <&ldo10_reg>;
 | |
| };
 | |
| 
 | |
| &tmu_cpu1 {
 | |
| 	vtmu-supply = <&ldo10_reg>;
 | |
| };
 | |
| 
 | |
| &tmu_cpu2 {
 | |
| 	vtmu-supply = <&ldo10_reg>;
 | |
| };
 | |
| 
 | |
| &tmu_cpu3 {
 | |
| 	vtmu-supply = <&ldo10_reg>;
 | |
| };
 | |
| 
 | |
| &tmu_gpu {
 | |
| 	vtmu-supply = <&ldo10_reg>;
 | |
| };
 | |
| 
 | |
| &usbdrd_dwc3_0 {
 | |
| 	dr_mode = "host";
 | |
| };
 | |
| 
 | |
| &usbdrd_dwc3_1 {
 | |
| 	dr_mode = "host";
 | |
| };
 | |
| 
 | |
| &usbdrd_phy0 {
 | |
| 	vbus-supply = <&usb300_vbus_reg>;
 | |
| };
 | |
| 
 | |
| &usbdrd_phy1 {
 | |
| 	vbus-supply = <&usb301_vbus_reg>;
 | |
| };
 | |
| 
 | |
| /*
 | |
|  * Use longest HW watchdog in SoC (32 seconds) since the hardware
 | |
|  * watchdog provides no debugging information (compared to soft/hard
 | |
|  * lockup detectors) and so should be last resort.
 | |
|  */
 | |
| &watchdog {
 | |
| 	timeout-sec = <32>;
 | |
| };
 | |
| 
 | |
| #include "cros-ec-keyboard.dtsi"
 | |
| #include "cros-adc-thermistors.dtsi"
 |