437 lines
7.1 KiB
Plaintext
437 lines
7.1 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0
|
|
/dts-v1/;
|
|
#include "aspeed-g5.dtsi"
|
|
#include <dt-bindings/gpio/aspeed-gpio.h>
|
|
|
|
/ {
|
|
model = "Zaius BMC";
|
|
compatible = "ingrasys,zaius-bmc", "aspeed,ast2500";
|
|
|
|
chosen {
|
|
stdout-path = &uart5;
|
|
bootargs = "console=ttyS4,115200 earlyprintk";
|
|
};
|
|
|
|
memory@80000000 {
|
|
reg = <0x80000000 0x40000000>;
|
|
};
|
|
|
|
reserved-memory {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
flash_memory: region@98000000 {
|
|
no-map;
|
|
reg = <0x98000000 0x04000000>; /* 64M */
|
|
};
|
|
};
|
|
|
|
onewire0 {
|
|
compatible = "w1-gpio";
|
|
gpios = <&gpio ASPEED_GPIO(H, 0) GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
onewire1 {
|
|
compatible = "w1-gpio";
|
|
gpios = <&gpio ASPEED_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
onewire2 {
|
|
compatible = "w1-gpio";
|
|
gpios = <&gpio ASPEED_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
onewire3 {
|
|
compatible = "w1-gpio";
|
|
gpios = <&gpio ASPEED_GPIO(H, 3) GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
gpio-keys {
|
|
compatible = "gpio-keys";
|
|
|
|
checkstop {
|
|
label = "checkstop";
|
|
gpios = <&gpio ASPEED_GPIO(F, 7) GPIO_ACTIVE_LOW>;
|
|
linux,code = <ASPEED_GPIO(F, 7)>;
|
|
};
|
|
|
|
pcie-e2b-present{
|
|
label = "pcie-e2b-present";
|
|
gpios = <&gpio ASPEED_GPIO(E, 7) GPIO_ACTIVE_LOW>;
|
|
linux,code = <ASPEED_GPIO(E, 7)>;
|
|
};
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
|
|
sys_boot_status {
|
|
label = "System boot status";
|
|
gpios = <&gpio ASPEED_GPIO(D, 5) GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
attention {
|
|
label = "Attention";
|
|
gpios = <&gpio ASPEED_GPIO(D, 6) GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
plt_fault {
|
|
label = "Platform fault";
|
|
gpios = <&gpio ASPEED_GPIO(D, 7) GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
hdd_fault {
|
|
label = "Onboard drive fault";
|
|
gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
|
|
fsi: gpio-fsi {
|
|
compatible = "fsi-master-gpio", "fsi-master";
|
|
#address-cells = <2>;
|
|
#size-cells = <0>;
|
|
|
|
trans-gpios = <&gpio ASPEED_GPIO(O, 6) GPIO_ACTIVE_HIGH>;
|
|
enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
|
|
clock-gpios = <&gpio ASPEED_GPIO(G, 0) GPIO_ACTIVE_HIGH>;
|
|
data-gpios = <&gpio ASPEED_GPIO(G, 1) GPIO_ACTIVE_HIGH>;
|
|
mux-gpios = <&gpio ASPEED_GPIO(P, 6) GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
iio-hwmon {
|
|
compatible = "iio-hwmon";
|
|
io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
|
|
<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
|
|
<&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
|
|
<&adc 13>, <&adc 14>, <&adc 15>;
|
|
};
|
|
|
|
iio-hwmon-battery {
|
|
compatible = "iio-hwmon";
|
|
io-channels = <&adc 12>;
|
|
};
|
|
|
|
};
|
|
|
|
&fmc {
|
|
status = "okay";
|
|
|
|
flash@0 {
|
|
status = "okay";
|
|
label = "bmc";
|
|
m25p,fast-read;
|
|
#include "openbmc-flash-layout.dtsi"
|
|
};
|
|
};
|
|
|
|
&spi1 {
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_spi1_default>;
|
|
|
|
flash@0 {
|
|
status = "okay";
|
|
label = "pnor";
|
|
m25p,fast-read;
|
|
};
|
|
};
|
|
|
|
&spi2 {
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_spi2ck_default
|
|
&pinctrl_spi2cs0_default
|
|
&pinctrl_spi2cs1_default
|
|
&pinctrl_spi2miso_default
|
|
&pinctrl_spi2mosi_default>;
|
|
|
|
flash@0 {
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
&uart1 {
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_txd1_default
|
|
&pinctrl_rxd1_default>;
|
|
};
|
|
|
|
&lpc_ctrl {
|
|
status = "okay";
|
|
memory-region = <&flash_memory>;
|
|
flash = <&spi1>;
|
|
};
|
|
|
|
&lpc_snoop {
|
|
status = "okay";
|
|
snoop-ports = <0x80>;
|
|
};
|
|
|
|
|
|
&uart5 {
|
|
status = "okay";
|
|
};
|
|
|
|
&mac0 {
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_rmii1_default>;
|
|
use-ncsi;
|
|
};
|
|
|
|
&mac1 {
|
|
status = "okay";
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
|
|
};
|
|
|
|
&i2c0 {
|
|
status = "okay";
|
|
|
|
eeprom@50 {
|
|
compatible = "atmel,24c64";
|
|
reg = <0x50>;
|
|
pagesize = <32>;
|
|
};
|
|
|
|
rtc@68 {
|
|
compatible = "nxp,pcf8523";
|
|
reg = <0x68>;
|
|
};
|
|
|
|
ucd90160@64 {
|
|
compatible = "ti,ucd90160";
|
|
reg = <0x64>;
|
|
};
|
|
|
|
/* Power sequencer UCD90160 PMBUS @64h
|
|
* FRU AT24C64D @50h
|
|
* RTC PCF8523 @68h
|
|
* Clock buffer 9DBL04 @6dh
|
|
*/
|
|
};
|
|
|
|
&i2c1 {
|
|
status = "okay";
|
|
|
|
i2c-switch@71 {
|
|
compatible = "nxp,pca9546";
|
|
reg = <0x71>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
/* MUX1 PCA9546A @71h
|
|
* PCIe 0
|
|
* PCIe 1
|
|
* PCIe 2
|
|
* TPM header
|
|
*/
|
|
};
|
|
|
|
&i2c2 {
|
|
status = "disabled";
|
|
|
|
/* OCP Mezz Connector A (OOB SMBUS) */
|
|
};
|
|
|
|
&i2c3 {
|
|
status = "disabled";
|
|
|
|
/* OCP Mezz Connector A (PCIe slot SMBUS) */
|
|
};
|
|
|
|
&i2c4 {
|
|
status = "okay";
|
|
|
|
i2c-switch@71 {
|
|
compatible = "nxp,pca9546";
|
|
reg = <0x71>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
/* MUX1 PCA9546A @71h
|
|
* PCIe 3
|
|
* PCIe 4
|
|
*/
|
|
};
|
|
|
|
|
|
&i2c5 {
|
|
status = "disabled";
|
|
|
|
/* CPU0 PRM 0.7V */
|
|
/* CPU0 PRM 1.2V CH03 */
|
|
/* CPU0 PRM 0.8V */
|
|
/* CPU0 PRM 1.2V CH47 */
|
|
};
|
|
|
|
&i2c6 {
|
|
status = "disabled";
|
|
|
|
/* CPU1 PRM 0.7V */
|
|
/* CPU1 PRM 1.2V CH03 */
|
|
/* CPU1 PRM 0.8V */
|
|
/* CPU1 PRM 1.2V CH47 */
|
|
};
|
|
|
|
&i2c7 {
|
|
status = "okay";
|
|
|
|
pca9541a@70 {
|
|
compatible = "nxp,pca9541";
|
|
reg = <0x70>;
|
|
|
|
i2c-arb {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
hotswap@54 {
|
|
compatible = "ti,lm5066i";
|
|
reg = <0x54>;
|
|
};
|
|
};
|
|
};
|
|
|
|
/* Master selector PCA9541A @70h (other master: CPU0)
|
|
* LM5066I PMBUS @10h
|
|
*/
|
|
|
|
/* 12V Quarter Brick DC/DC Converter Q54SJ12050 @61h */
|
|
power-brick@61 {
|
|
compatible = "delta,dps800";
|
|
reg = <0x61>;
|
|
};
|
|
|
|
/* CPU0 VR ISL68137 0.7V, 0.96V PMBUS @64h */
|
|
/* CPU0 VR ISL68137 1.2V CH03 PMBUS @40h */
|
|
/* CPU0 VR ISL68137 0.8V PMBUS @60h */
|
|
/* CPU0 VR 1.0V IR38064 I2C @11h, PMBUS @41h */
|
|
/* CPU0 VR ISL68137 1.2V CH47 PMBUS @41h */
|
|
};
|
|
|
|
&i2c8 {
|
|
status = "okay";
|
|
|
|
/* CPU1 VR ISL68137 0.7V, 0.96V PMBUS @65h */
|
|
/* CPU1 VR ISL68137 1.2V CH03 PMBUS @44h */
|
|
/* CPU1 VR ISL68137 0.8V PMBUS @61h */
|
|
/* CPU1 VR 1.0V IR38064 I2C @12h, PMBUS @42h */
|
|
/* CPU0 VR ISL68137 1.2V CH47 PMBUS @45h */
|
|
};
|
|
|
|
|
|
&i2c9 {
|
|
status = "disabled";
|
|
|
|
/* Fan board */
|
|
};
|
|
|
|
&i2c10 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&i2c11 {
|
|
status = "disabled";
|
|
|
|
/* GPU sideband */
|
|
};
|
|
|
|
&i2c12 {
|
|
status = "disabled";
|
|
};
|
|
|
|
&i2c13 {
|
|
status = "disabled";
|
|
|
|
/* MUX PI3USB102
|
|
* CPU0 debug
|
|
* CPU1 debug
|
|
*/
|
|
};
|
|
|
|
&pinctrl {
|
|
aspeed,external-nodes = <&gfx &lhc>;
|
|
|
|
pinctrl_gpioh_unbiased: gpioi_unbiased {
|
|
pins = "A8", "C7", "B7", "A7", "D7", "B6", "A6", "E7";
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
&gpio {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_gpioh_unbiased>;
|
|
|
|
line_iso_u146_en {
|
|
gpio-hog;
|
|
gpios = <ASPEED_GPIO(O, 4) GPIO_ACTIVE_HIGH>;
|
|
output-high;
|
|
line-name = "iso_u164_en";
|
|
};
|
|
|
|
ncsi_mux_en_n {
|
|
gpio-hog;
|
|
gpios = <ASPEED_GPIO(P, 0) GPIO_ACTIVE_HIGH>;
|
|
output-low;
|
|
line-name = "ncsi_mux_en_n";
|
|
};
|
|
|
|
line_bmc_i2c2_sw_rst_n {
|
|
gpio-hog;
|
|
gpios = <ASPEED_GPIO(P, 1) GPIO_ACTIVE_HIGH>;
|
|
output-high;
|
|
line-name = "bmc_i2c2_sw_rst_n";
|
|
};
|
|
|
|
line_bmc_i2c5_sw_rst_n {
|
|
gpio-hog;
|
|
gpios = <ASPEED_GPIO(P, 3) GPIO_ACTIVE_HIGH>;
|
|
output-high;
|
|
line-name = "bmc_i2c5_sw_rst_n";
|
|
};
|
|
};
|
|
|
|
&vuart {
|
|
status = "okay";
|
|
};
|
|
|
|
&gfx {
|
|
status = "okay";
|
|
};
|
|
|
|
&pwm_tacho {
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
|
|
&pinctrl_pwm2_default &pinctrl_pwm3_default>;
|
|
|
|
fan@0 {
|
|
reg = <0x00>;
|
|
aspeed,fan-tach-ch = /bits/ 8 <0x00>;
|
|
};
|
|
|
|
fan@1 {
|
|
reg = <0x01>;
|
|
aspeed,fan-tach-ch = /bits/ 8 <0x01>;
|
|
};
|
|
|
|
fan@2 {
|
|
reg = <0x02>;
|
|
aspeed,fan-tach-ch = /bits/ 8 <0x02>;
|
|
};
|
|
|
|
fan@3 {
|
|
reg = <0x03>;
|
|
aspeed,fan-tach-ch = /bits/ 8 <0x03>;
|
|
};
|
|
};
|
|
|
|
&ibt {
|
|
status = "okay";
|
|
};
|