1100 lines
		
	
	
		
			30 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			1100 lines
		
	
	
		
			30 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
| // SPDX-License-Identifier: GPL-2.0-only
 | |
| /*
 | |
|  * Copyright (c) 2016, The Linux Foundation. All rights reserved.
 | |
|  */
 | |
| 
 | |
| #include <linux/clk.h>
 | |
| #include <linux/clk-provider.h>
 | |
| #include <linux/delay.h>
 | |
| 
 | |
| #include "dsi_phy.h"
 | |
| #include "dsi.xml.h"
 | |
| #include "dsi_phy_14nm.xml.h"
 | |
| 
 | |
| #define PHY_14NM_CKLN_IDX	4
 | |
| 
 | |
| /*
 | |
|  * DSI PLL 14nm - clock diagram (eg: DSI0):
 | |
|  *
 | |
|  *         dsi0n1_postdiv_clk
 | |
|  *                         |
 | |
|  *                         |
 | |
|  *                 +----+  |  +----+
 | |
|  *  dsi0vco_clk ---| n1 |--o--| /8 |-- dsi0pllbyte
 | |
|  *                 +----+  |  +----+
 | |
|  *                         |           dsi0n1_postdivby2_clk
 | |
|  *                         |   +----+  |
 | |
|  *                         o---| /2 |--o--|\
 | |
|  *                         |   +----+     | \   +----+
 | |
|  *                         |              |  |--| n2 |-- dsi0pll
 | |
|  *                         o--------------| /   +----+
 | |
|  *                                        |/
 | |
|  */
 | |
| 
 | |
| #define POLL_MAX_READS			15
 | |
| #define POLL_TIMEOUT_US			1000
 | |
| 
 | |
| #define VCO_REF_CLK_RATE		19200000
 | |
| #define VCO_MIN_RATE			1300000000UL
 | |
| #define VCO_MAX_RATE			2600000000UL
 | |
| 
 | |
| struct dsi_pll_config {
 | |
| 	u64 vco_current_rate;
 | |
| 
 | |
| 	u32 ssc_en;	/* SSC enable/disable */
 | |
| 
 | |
| 	/* fixed params */
 | |
| 	u32 plllock_cnt;
 | |
| 	u32 ssc_center;
 | |
| 	u32 ssc_adj_period;
 | |
| 	u32 ssc_spread;
 | |
| 	u32 ssc_freq;
 | |
| 
 | |
| 	/* calculated */
 | |
| 	u32 dec_start;
 | |
| 	u32 div_frac_start;
 | |
| 	u32 ssc_period;
 | |
| 	u32 ssc_step_size;
 | |
| 	u32 plllock_cmp;
 | |
| 	u32 pll_vco_div_ref;
 | |
| 	u32 pll_vco_count;
 | |
| 	u32 pll_kvco_div_ref;
 | |
| 	u32 pll_kvco_count;
 | |
| };
 | |
| 
 | |
| struct pll_14nm_cached_state {
 | |
| 	unsigned long vco_rate;
 | |
| 	u8 n2postdiv;
 | |
| 	u8 n1postdiv;
 | |
| };
 | |
| 
 | |
| struct dsi_pll_14nm {
 | |
| 	struct clk_hw clk_hw;
 | |
| 
 | |
| 	struct msm_dsi_phy *phy;
 | |
| 
 | |
| 	/* protects REG_DSI_14nm_PHY_CMN_CLK_CFG0 register */
 | |
| 	spinlock_t postdiv_lock;
 | |
| 
 | |
| 	struct pll_14nm_cached_state cached_state;
 | |
| 
 | |
| 	struct dsi_pll_14nm *slave;
 | |
| };
 | |
| 
 | |
| #define to_pll_14nm(x)	container_of(x, struct dsi_pll_14nm, clk_hw)
 | |
| 
 | |
| /*
 | |
|  * Private struct for N1/N2 post-divider clocks. These clocks are similar to
 | |
|  * the generic clk_divider class of clocks. The only difference is that it
 | |
|  * also sets the slave DSI PLL's post-dividers if in bonded DSI mode
 | |
|  */
 | |
| struct dsi_pll_14nm_postdiv {
 | |
| 	struct clk_hw hw;
 | |
| 
 | |
| 	/* divider params */
 | |
| 	u8 shift;
 | |
| 	u8 width;
 | |
| 	u8 flags; /* same flags as used by clk_divider struct */
 | |
| 
 | |
| 	struct dsi_pll_14nm *pll;
 | |
| };
 | |
| 
 | |
| #define to_pll_14nm_postdiv(_hw) container_of(_hw, struct dsi_pll_14nm_postdiv, hw)
 | |
| 
 | |
| /*
 | |
|  * Global list of private DSI PLL struct pointers. We need this for bonded DSI
 | |
|  * mode, where the master PLL's clk_ops needs access the slave's private data
 | |
|  */
 | |
| static struct dsi_pll_14nm *pll_14nm_list[DSI_MAX];
 | |
| 
 | |
| static bool pll_14nm_poll_for_ready(struct dsi_pll_14nm *pll_14nm,
 | |
| 				    u32 nb_tries, u32 timeout_us)
 | |
| {
 | |
| 	bool pll_locked = false, pll_ready = false;
 | |
| 	void __iomem *base = pll_14nm->phy->pll_base;
 | |
| 	u32 tries, val;
 | |
| 
 | |
| 	tries = nb_tries;
 | |
| 	while (tries--) {
 | |
| 		val = readl(base + REG_DSI_14nm_PHY_PLL_RESET_SM_READY_STATUS);
 | |
| 		pll_locked = !!(val & BIT(5));
 | |
| 
 | |
| 		if (pll_locked)
 | |
| 			break;
 | |
| 
 | |
| 		udelay(timeout_us);
 | |
| 	}
 | |
| 
 | |
| 	if (!pll_locked)
 | |
| 		goto out;
 | |
| 
 | |
| 	tries = nb_tries;
 | |
| 	while (tries--) {
 | |
| 		val = readl(base + REG_DSI_14nm_PHY_PLL_RESET_SM_READY_STATUS);
 | |
| 		pll_ready = !!(val & BIT(0));
 | |
| 
 | |
| 		if (pll_ready)
 | |
| 			break;
 | |
| 
 | |
| 		udelay(timeout_us);
 | |
| 	}
 | |
| 
 | |
| out:
 | |
| 	DBG("DSI PLL is %slocked, %sready", pll_locked ? "" : "*not* ", pll_ready ? "" : "*not* ");
 | |
| 
 | |
| 	return pll_locked && pll_ready;
 | |
| }
 | |
| 
 | |
| static void dsi_pll_14nm_config_init(struct dsi_pll_config *pconf)
 | |
| {
 | |
| 	/* fixed input */
 | |
| 	pconf->plllock_cnt = 1;
 | |
| 
 | |
| 	/*
 | |
| 	 * SSC is enabled by default. We might need DT props for configuring
 | |
| 	 * some SSC params like PPM and center/down spread etc.
 | |
| 	 */
 | |
| 	pconf->ssc_en = 1;
 | |
| 	pconf->ssc_center = 0;		/* down spread by default */
 | |
| 	pconf->ssc_spread = 5;		/* PPM / 1000 */
 | |
| 	pconf->ssc_freq = 31500;	/* default recommended */
 | |
| 	pconf->ssc_adj_period = 37;
 | |
| }
 | |
| 
 | |
| #define CEIL(x, y)		(((x) + ((y) - 1)) / (y))
 | |
| 
 | |
| static void pll_14nm_ssc_calc(struct dsi_pll_14nm *pll, struct dsi_pll_config *pconf)
 | |
| {
 | |
| 	u32 period, ssc_period;
 | |
| 	u32 ref, rem;
 | |
| 	u64 step_size;
 | |
| 
 | |
| 	DBG("vco=%lld ref=%d", pconf->vco_current_rate, VCO_REF_CLK_RATE);
 | |
| 
 | |
| 	ssc_period = pconf->ssc_freq / 500;
 | |
| 	period = (u32)VCO_REF_CLK_RATE / 1000;
 | |
| 	ssc_period  = CEIL(period, ssc_period);
 | |
| 	ssc_period -= 1;
 | |
| 	pconf->ssc_period = ssc_period;
 | |
| 
 | |
| 	DBG("ssc freq=%d spread=%d period=%d", pconf->ssc_freq,
 | |
| 	    pconf->ssc_spread, pconf->ssc_period);
 | |
| 
 | |
| 	step_size = (u32)pconf->vco_current_rate;
 | |
| 	ref = VCO_REF_CLK_RATE;
 | |
| 	ref /= 1000;
 | |
| 	step_size = div_u64(step_size, ref);
 | |
| 	step_size <<= 20;
 | |
| 	step_size = div_u64(step_size, 1000);
 | |
| 	step_size *= pconf->ssc_spread;
 | |
| 	step_size = div_u64(step_size, 1000);
 | |
| 	step_size *= (pconf->ssc_adj_period + 1);
 | |
| 
 | |
| 	rem = 0;
 | |
| 	step_size = div_u64_rem(step_size, ssc_period + 1, &rem);
 | |
| 	if (rem)
 | |
| 		step_size++;
 | |
| 
 | |
| 	DBG("step_size=%lld", step_size);
 | |
| 
 | |
| 	step_size &= 0x0ffff;	/* take lower 16 bits */
 | |
| 
 | |
| 	pconf->ssc_step_size = step_size;
 | |
| }
 | |
| 
 | |
| static void pll_14nm_dec_frac_calc(struct dsi_pll_14nm *pll, struct dsi_pll_config *pconf)
 | |
| {
 | |
| 	u64 multiplier = BIT(20);
 | |
| 	u64 dec_start_multiple, dec_start, pll_comp_val;
 | |
| 	u32 duration, div_frac_start;
 | |
| 	u64 vco_clk_rate = pconf->vco_current_rate;
 | |
| 	u64 fref = VCO_REF_CLK_RATE;
 | |
| 
 | |
| 	DBG("vco_clk_rate=%lld ref_clk_rate=%lld", vco_clk_rate, fref);
 | |
| 
 | |
| 	dec_start_multiple = div_u64(vco_clk_rate * multiplier, fref);
 | |
| 	dec_start = div_u64_rem(dec_start_multiple, multiplier, &div_frac_start);
 | |
| 
 | |
| 	pconf->dec_start = (u32)dec_start;
 | |
| 	pconf->div_frac_start = div_frac_start;
 | |
| 
 | |
| 	if (pconf->plllock_cnt == 0)
 | |
| 		duration = 1024;
 | |
| 	else if (pconf->plllock_cnt == 1)
 | |
| 		duration = 256;
 | |
| 	else if (pconf->plllock_cnt == 2)
 | |
| 		duration = 128;
 | |
| 	else
 | |
| 		duration = 32;
 | |
| 
 | |
| 	pll_comp_val = duration * dec_start_multiple;
 | |
| 	pll_comp_val = div_u64(pll_comp_val, multiplier);
 | |
| 	do_div(pll_comp_val, 10);
 | |
| 
 | |
| 	pconf->plllock_cmp = (u32)pll_comp_val;
 | |
| }
 | |
| 
 | |
| static u32 pll_14nm_kvco_slop(u32 vrate)
 | |
| {
 | |
| 	u32 slop = 0;
 | |
| 
 | |
| 	if (vrate > VCO_MIN_RATE && vrate <= 1800000000UL)
 | |
| 		slop =  600;
 | |
| 	else if (vrate > 1800000000UL && vrate < 2300000000UL)
 | |
| 		slop = 400;
 | |
| 	else if (vrate > 2300000000UL && vrate < VCO_MAX_RATE)
 | |
| 		slop = 280;
 | |
| 
 | |
| 	return slop;
 | |
| }
 | |
| 
 | |
| static void pll_14nm_calc_vco_count(struct dsi_pll_14nm *pll, struct dsi_pll_config *pconf)
 | |
| {
 | |
| 	u64 vco_clk_rate = pconf->vco_current_rate;
 | |
| 	u64 fref = VCO_REF_CLK_RATE;
 | |
| 	u32 vco_measure_time = 5;
 | |
| 	u32 kvco_measure_time = 5;
 | |
| 	u64 data;
 | |
| 	u32 cnt;
 | |
| 
 | |
| 	data = fref * vco_measure_time;
 | |
| 	do_div(data, 1000000);
 | |
| 	data &= 0x03ff;	/* 10 bits */
 | |
| 	data -= 2;
 | |
| 	pconf->pll_vco_div_ref = data;
 | |
| 
 | |
| 	data = div_u64(vco_clk_rate, 1000000);	/* unit is Mhz */
 | |
| 	data *= vco_measure_time;
 | |
| 	do_div(data, 10);
 | |
| 	pconf->pll_vco_count = data;
 | |
| 
 | |
| 	data = fref * kvco_measure_time;
 | |
| 	do_div(data, 1000000);
 | |
| 	data &= 0x03ff;	/* 10 bits */
 | |
| 	data -= 1;
 | |
| 	pconf->pll_kvco_div_ref = data;
 | |
| 
 | |
| 	cnt = pll_14nm_kvco_slop(vco_clk_rate);
 | |
| 	cnt *= 2;
 | |
| 	cnt /= 100;
 | |
| 	cnt *= kvco_measure_time;
 | |
| 	pconf->pll_kvco_count = cnt;
 | |
| }
 | |
| 
 | |
| static void pll_db_commit_ssc(struct dsi_pll_14nm *pll, struct dsi_pll_config *pconf)
 | |
| {
 | |
| 	void __iomem *base = pll->phy->pll_base;
 | |
| 	u8 data;
 | |
| 
 | |
| 	data = pconf->ssc_adj_period;
 | |
| 	data &= 0x0ff;
 | |
| 	writel(data, base + REG_DSI_14nm_PHY_PLL_SSC_ADJ_PER1);
 | |
| 	data = (pconf->ssc_adj_period >> 8);
 | |
| 	data &= 0x03;
 | |
| 	writel(data, base + REG_DSI_14nm_PHY_PLL_SSC_ADJ_PER2);
 | |
| 
 | |
| 	data = pconf->ssc_period;
 | |
| 	data &= 0x0ff;
 | |
| 	writel(data, base + REG_DSI_14nm_PHY_PLL_SSC_PER1);
 | |
| 	data = (pconf->ssc_period >> 8);
 | |
| 	data &= 0x0ff;
 | |
| 	writel(data, base + REG_DSI_14nm_PHY_PLL_SSC_PER2);
 | |
| 
 | |
| 	data = pconf->ssc_step_size;
 | |
| 	data &= 0x0ff;
 | |
| 	writel(data, base + REG_DSI_14nm_PHY_PLL_SSC_STEP_SIZE1);
 | |
| 	data = (pconf->ssc_step_size >> 8);
 | |
| 	data &= 0x0ff;
 | |
| 	writel(data, base + REG_DSI_14nm_PHY_PLL_SSC_STEP_SIZE2);
 | |
| 
 | |
| 	data = (pconf->ssc_center & 0x01);
 | |
| 	data <<= 1;
 | |
| 	data |= 0x01; /* enable */
 | |
| 	writel(data, base + REG_DSI_14nm_PHY_PLL_SSC_EN_CENTER);
 | |
| 
 | |
| 	wmb();	/* make sure register committed */
 | |
| }
 | |
| 
 | |
| static void pll_db_commit_common(struct dsi_pll_14nm *pll,
 | |
| 				 struct dsi_pll_config *pconf)
 | |
| {
 | |
| 	void __iomem *base = pll->phy->pll_base;
 | |
| 	u8 data;
 | |
| 
 | |
| 	/* confgiure the non frequency dependent pll registers */
 | |
| 	data = 0;
 | |
| 	writel(data, base + REG_DSI_14nm_PHY_PLL_SYSCLK_EN_RESET);
 | |
| 
 | |
| 	writel(1, base + REG_DSI_14nm_PHY_PLL_TXCLK_EN);
 | |
| 
 | |
| 	writel(48, base + REG_DSI_14nm_PHY_PLL_RESETSM_CNTRL);
 | |
| 	/* bandgap_timer */
 | |
| 	writel(4 << 3, base + REG_DSI_14nm_PHY_PLL_RESETSM_CNTRL2);
 | |
| 	/* pll_wakeup_timer */
 | |
| 	writel(5, base + REG_DSI_14nm_PHY_PLL_RESETSM_CNTRL5);
 | |
| 
 | |
| 	data = pconf->pll_vco_div_ref & 0xff;
 | |
| 	writel(data, base + REG_DSI_14nm_PHY_PLL_VCO_DIV_REF1);
 | |
| 	data = (pconf->pll_vco_div_ref >> 8) & 0x3;
 | |
| 	writel(data, base + REG_DSI_14nm_PHY_PLL_VCO_DIV_REF2);
 | |
| 
 | |
| 	data = pconf->pll_kvco_div_ref & 0xff;
 | |
| 	writel(data, base + REG_DSI_14nm_PHY_PLL_KVCO_DIV_REF1);
 | |
| 	data = (pconf->pll_kvco_div_ref >> 8) & 0x3;
 | |
| 	writel(data, base + REG_DSI_14nm_PHY_PLL_KVCO_DIV_REF2);
 | |
| 
 | |
| 	writel(16, base + REG_DSI_14nm_PHY_PLL_PLL_MISC1);
 | |
| 
 | |
| 	writel(4, base + REG_DSI_14nm_PHY_PLL_IE_TRIM);
 | |
| 
 | |
| 	writel(4, base + REG_DSI_14nm_PHY_PLL_IP_TRIM);
 | |
| 
 | |
| 	writel(1 << 3 | 1, base + REG_DSI_14nm_PHY_PLL_CP_SET_CUR);
 | |
| 
 | |
| 	writel(0 << 3 | 0, base + REG_DSI_14nm_PHY_PLL_PLL_ICPCSET);
 | |
| 
 | |
| 	writel(0 << 3 | 0, base + REG_DSI_14nm_PHY_PLL_PLL_ICPMSET);
 | |
| 
 | |
| 	writel(4 << 3 | 4, base + REG_DSI_14nm_PHY_PLL_PLL_ICP_SET);
 | |
| 
 | |
| 	writel(1 << 4 | 11, base + REG_DSI_14nm_PHY_PLL_PLL_LPF1);
 | |
| 
 | |
| 	writel(7, base + REG_DSI_14nm_PHY_PLL_IPTAT_TRIM);
 | |
| 
 | |
| 	writel(1 << 4 | 2, base + REG_DSI_14nm_PHY_PLL_PLL_CRCTRL);
 | |
| }
 | |
| 
 | |
| static void pll_14nm_software_reset(struct dsi_pll_14nm *pll_14nm)
 | |
| {
 | |
| 	void __iomem *cmn_base = pll_14nm->phy->base;
 | |
| 
 | |
| 	/* de assert pll start and apply pll sw reset */
 | |
| 
 | |
| 	/* stop pll */
 | |
| 	writel(0, cmn_base + REG_DSI_14nm_PHY_CMN_PLL_CNTRL);
 | |
| 
 | |
| 	/* pll sw reset */
 | |
| 	writel(0x20, cmn_base + REG_DSI_14nm_PHY_CMN_CTRL_1);
 | |
| 	udelay(10);
 | |
| 	wmb();	/* make sure register committed */
 | |
| 
 | |
| 	writel(0, cmn_base + REG_DSI_14nm_PHY_CMN_CTRL_1);
 | |
| 	wmb();	/* make sure register committed */
 | |
| }
 | |
| 
 | |
| static void pll_db_commit_14nm(struct dsi_pll_14nm *pll,
 | |
| 			       struct dsi_pll_config *pconf)
 | |
| {
 | |
| 	void __iomem *base = pll->phy->pll_base;
 | |
| 	void __iomem *cmn_base = pll->phy->base;
 | |
| 	u8 data;
 | |
| 
 | |
| 	DBG("DSI%d PLL", pll->phy->id);
 | |
| 
 | |
| 	writel(0x3c, cmn_base + REG_DSI_14nm_PHY_CMN_LDO_CNTRL);
 | |
| 
 | |
| 	pll_db_commit_common(pll, pconf);
 | |
| 
 | |
| 	pll_14nm_software_reset(pll);
 | |
| 
 | |
| 	/* Use the /2 path in Mux */
 | |
| 	writel(1, cmn_base + REG_DSI_14nm_PHY_CMN_CLK_CFG1);
 | |
| 
 | |
| 	data = 0xff; /* data, clk, pll normal operation */
 | |
| 	writel(data, cmn_base + REG_DSI_14nm_PHY_CMN_CTRL_0);
 | |
| 
 | |
| 	/* configure the frequency dependent pll registers */
 | |
| 	data = pconf->dec_start;
 | |
| 	writel(data, base + REG_DSI_14nm_PHY_PLL_DEC_START);
 | |
| 
 | |
| 	data = pconf->div_frac_start & 0xff;
 | |
| 	writel(data, base + REG_DSI_14nm_PHY_PLL_DIV_FRAC_START1);
 | |
| 	data = (pconf->div_frac_start >> 8) & 0xff;
 | |
| 	writel(data, base + REG_DSI_14nm_PHY_PLL_DIV_FRAC_START2);
 | |
| 	data = (pconf->div_frac_start >> 16) & 0xf;
 | |
| 	writel(data, base + REG_DSI_14nm_PHY_PLL_DIV_FRAC_START3);
 | |
| 
 | |
| 	data = pconf->plllock_cmp & 0xff;
 | |
| 	writel(data, base + REG_DSI_14nm_PHY_PLL_PLLLOCK_CMP1);
 | |
| 
 | |
| 	data = (pconf->plllock_cmp >> 8) & 0xff;
 | |
| 	writel(data, base + REG_DSI_14nm_PHY_PLL_PLLLOCK_CMP2);
 | |
| 
 | |
| 	data = (pconf->plllock_cmp >> 16) & 0x3;
 | |
| 	writel(data, base + REG_DSI_14nm_PHY_PLL_PLLLOCK_CMP3);
 | |
| 
 | |
| 	data = pconf->plllock_cnt << 1 | 0 << 3; /* plllock_rng */
 | |
| 	writel(data, base + REG_DSI_14nm_PHY_PLL_PLLLOCK_CMP_EN);
 | |
| 
 | |
| 	data = pconf->pll_vco_count & 0xff;
 | |
| 	writel(data, base + REG_DSI_14nm_PHY_PLL_VCO_COUNT1);
 | |
| 	data = (pconf->pll_vco_count >> 8) & 0xff;
 | |
| 	writel(data, base + REG_DSI_14nm_PHY_PLL_VCO_COUNT2);
 | |
| 
 | |
| 	data = pconf->pll_kvco_count & 0xff;
 | |
| 	writel(data, base + REG_DSI_14nm_PHY_PLL_KVCO_COUNT1);
 | |
| 	data = (pconf->pll_kvco_count >> 8) & 0x3;
 | |
| 	writel(data, base + REG_DSI_14nm_PHY_PLL_KVCO_COUNT2);
 | |
| 
 | |
| 	/*
 | |
| 	 * High nibble configures the post divider internal to the VCO. It's
 | |
| 	 * fixed to divide by 1 for now.
 | |
| 	 *
 | |
| 	 * 0: divided by 1
 | |
| 	 * 1: divided by 2
 | |
| 	 * 2: divided by 4
 | |
| 	 * 3: divided by 8
 | |
| 	 */
 | |
| 	writel(0 << 4 | 3, base + REG_DSI_14nm_PHY_PLL_PLL_LPF2_POSTDIV);
 | |
| 
 | |
| 	if (pconf->ssc_en)
 | |
| 		pll_db_commit_ssc(pll, pconf);
 | |
| 
 | |
| 	wmb();	/* make sure register committed */
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * VCO clock Callbacks
 | |
|  */
 | |
| static int dsi_pll_14nm_vco_set_rate(struct clk_hw *hw, unsigned long rate,
 | |
| 				     unsigned long parent_rate)
 | |
| {
 | |
| 	struct dsi_pll_14nm *pll_14nm = to_pll_14nm(hw);
 | |
| 	struct dsi_pll_config conf;
 | |
| 
 | |
| 	DBG("DSI PLL%d rate=%lu, parent's=%lu", pll_14nm->phy->id, rate,
 | |
| 	    parent_rate);
 | |
| 
 | |
| 	dsi_pll_14nm_config_init(&conf);
 | |
| 	conf.vco_current_rate = rate;
 | |
| 
 | |
| 	pll_14nm_dec_frac_calc(pll_14nm, &conf);
 | |
| 
 | |
| 	if (conf.ssc_en)
 | |
| 		pll_14nm_ssc_calc(pll_14nm, &conf);
 | |
| 
 | |
| 	pll_14nm_calc_vco_count(pll_14nm, &conf);
 | |
| 
 | |
| 	/* commit the slave DSI PLL registers if we're master. Note that we
 | |
| 	 * don't lock the slave PLL. We just ensure that the PLL/PHY registers
 | |
| 	 * of the master and slave are identical
 | |
| 	 */
 | |
| 	if (pll_14nm->phy->usecase == MSM_DSI_PHY_MASTER) {
 | |
| 		struct dsi_pll_14nm *pll_14nm_slave = pll_14nm->slave;
 | |
| 
 | |
| 		pll_db_commit_14nm(pll_14nm_slave, &conf);
 | |
| 	}
 | |
| 
 | |
| 	pll_db_commit_14nm(pll_14nm, &conf);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static unsigned long dsi_pll_14nm_vco_recalc_rate(struct clk_hw *hw,
 | |
| 						  unsigned long parent_rate)
 | |
| {
 | |
| 	struct dsi_pll_14nm *pll_14nm = to_pll_14nm(hw);
 | |
| 	void __iomem *base = pll_14nm->phy->pll_base;
 | |
| 	u64 vco_rate, multiplier = BIT(20);
 | |
| 	u32 div_frac_start;
 | |
| 	u32 dec_start;
 | |
| 	u64 ref_clk = parent_rate;
 | |
| 
 | |
| 	dec_start = readl(base + REG_DSI_14nm_PHY_PLL_DEC_START);
 | |
| 	dec_start &= 0x0ff;
 | |
| 
 | |
| 	DBG("dec_start = %x", dec_start);
 | |
| 
 | |
| 	div_frac_start = (readl(base + REG_DSI_14nm_PHY_PLL_DIV_FRAC_START3)
 | |
| 				& 0xf) << 16;
 | |
| 	div_frac_start |= (readl(base + REG_DSI_14nm_PHY_PLL_DIV_FRAC_START2)
 | |
| 				& 0xff) << 8;
 | |
| 	div_frac_start |= readl(base + REG_DSI_14nm_PHY_PLL_DIV_FRAC_START1)
 | |
| 				& 0xff;
 | |
| 
 | |
| 	DBG("div_frac_start = %x", div_frac_start);
 | |
| 
 | |
| 	vco_rate = ref_clk * dec_start;
 | |
| 
 | |
| 	vco_rate += ((ref_clk * div_frac_start) / multiplier);
 | |
| 
 | |
| 	/*
 | |
| 	 * Recalculating the rate from dec_start and frac_start doesn't end up
 | |
| 	 * the rate we originally set. Convert the freq to KHz, round it up and
 | |
| 	 * convert it back to MHz.
 | |
| 	 */
 | |
| 	vco_rate = DIV_ROUND_UP_ULL(vco_rate, 1000) * 1000;
 | |
| 
 | |
| 	DBG("returning vco rate = %lu", (unsigned long)vco_rate);
 | |
| 
 | |
| 	return (unsigned long)vco_rate;
 | |
| }
 | |
| 
 | |
| static int dsi_pll_14nm_vco_prepare(struct clk_hw *hw)
 | |
| {
 | |
| 	struct dsi_pll_14nm *pll_14nm = to_pll_14nm(hw);
 | |
| 	void __iomem *base = pll_14nm->phy->pll_base;
 | |
| 	void __iomem *cmn_base = pll_14nm->phy->base;
 | |
| 	bool locked;
 | |
| 
 | |
| 	DBG("");
 | |
| 
 | |
| 	if (unlikely(pll_14nm->phy->pll_on))
 | |
| 		return 0;
 | |
| 
 | |
| 	if (dsi_pll_14nm_vco_recalc_rate(hw, VCO_REF_CLK_RATE) == 0)
 | |
| 		dsi_pll_14nm_vco_set_rate(hw, pll_14nm->phy->cfg->min_pll_rate, VCO_REF_CLK_RATE);
 | |
| 
 | |
| 	writel(0x10, base + REG_DSI_14nm_PHY_PLL_VREF_CFG1);
 | |
| 	writel(1, cmn_base + REG_DSI_14nm_PHY_CMN_PLL_CNTRL);
 | |
| 
 | |
| 	locked = pll_14nm_poll_for_ready(pll_14nm, POLL_MAX_READS,
 | |
| 					 POLL_TIMEOUT_US);
 | |
| 
 | |
| 	if (unlikely(!locked)) {
 | |
| 		DRM_DEV_ERROR(&pll_14nm->phy->pdev->dev, "DSI PLL lock failed\n");
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| 
 | |
| 	DBG("DSI PLL lock success");
 | |
| 	pll_14nm->phy->pll_on = true;
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static void dsi_pll_14nm_vco_unprepare(struct clk_hw *hw)
 | |
| {
 | |
| 	struct dsi_pll_14nm *pll_14nm = to_pll_14nm(hw);
 | |
| 	void __iomem *cmn_base = pll_14nm->phy->base;
 | |
| 
 | |
| 	DBG("");
 | |
| 
 | |
| 	if (unlikely(!pll_14nm->phy->pll_on))
 | |
| 		return;
 | |
| 
 | |
| 	writel(0, cmn_base + REG_DSI_14nm_PHY_CMN_PLL_CNTRL);
 | |
| 
 | |
| 	pll_14nm->phy->pll_on = false;
 | |
| }
 | |
| 
 | |
| static long dsi_pll_14nm_clk_round_rate(struct clk_hw *hw,
 | |
| 		unsigned long rate, unsigned long *parent_rate)
 | |
| {
 | |
| 	struct dsi_pll_14nm *pll_14nm = to_pll_14nm(hw);
 | |
| 
 | |
| 	if      (rate < pll_14nm->phy->cfg->min_pll_rate)
 | |
| 		return  pll_14nm->phy->cfg->min_pll_rate;
 | |
| 	else if (rate > pll_14nm->phy->cfg->max_pll_rate)
 | |
| 		return  pll_14nm->phy->cfg->max_pll_rate;
 | |
| 	else
 | |
| 		return rate;
 | |
| }
 | |
| 
 | |
| static const struct clk_ops clk_ops_dsi_pll_14nm_vco = {
 | |
| 	.round_rate = dsi_pll_14nm_clk_round_rate,
 | |
| 	.set_rate = dsi_pll_14nm_vco_set_rate,
 | |
| 	.recalc_rate = dsi_pll_14nm_vco_recalc_rate,
 | |
| 	.prepare = dsi_pll_14nm_vco_prepare,
 | |
| 	.unprepare = dsi_pll_14nm_vco_unprepare,
 | |
| };
 | |
| 
 | |
| /*
 | |
|  * N1 and N2 post-divider clock callbacks
 | |
|  */
 | |
| #define div_mask(width)	((1 << (width)) - 1)
 | |
| static unsigned long dsi_pll_14nm_postdiv_recalc_rate(struct clk_hw *hw,
 | |
| 						      unsigned long parent_rate)
 | |
| {
 | |
| 	struct dsi_pll_14nm_postdiv *postdiv = to_pll_14nm_postdiv(hw);
 | |
| 	struct dsi_pll_14nm *pll_14nm = postdiv->pll;
 | |
| 	void __iomem *base = pll_14nm->phy->base;
 | |
| 	u8 shift = postdiv->shift;
 | |
| 	u8 width = postdiv->width;
 | |
| 	u32 val;
 | |
| 
 | |
| 	DBG("DSI%d PLL parent rate=%lu", pll_14nm->phy->id, parent_rate);
 | |
| 
 | |
| 	val = readl(base + REG_DSI_14nm_PHY_CMN_CLK_CFG0) >> shift;
 | |
| 	val &= div_mask(width);
 | |
| 
 | |
| 	return divider_recalc_rate(hw, parent_rate, val, NULL,
 | |
| 				   postdiv->flags, width);
 | |
| }
 | |
| 
 | |
| static long dsi_pll_14nm_postdiv_round_rate(struct clk_hw *hw,
 | |
| 					    unsigned long rate,
 | |
| 					    unsigned long *prate)
 | |
| {
 | |
| 	struct dsi_pll_14nm_postdiv *postdiv = to_pll_14nm_postdiv(hw);
 | |
| 	struct dsi_pll_14nm *pll_14nm = postdiv->pll;
 | |
| 
 | |
| 	DBG("DSI%d PLL parent rate=%lu", pll_14nm->phy->id, rate);
 | |
| 
 | |
| 	return divider_round_rate(hw, rate, prate, NULL,
 | |
| 				  postdiv->width,
 | |
| 				  postdiv->flags);
 | |
| }
 | |
| 
 | |
| static int dsi_pll_14nm_postdiv_set_rate(struct clk_hw *hw, unsigned long rate,
 | |
| 					 unsigned long parent_rate)
 | |
| {
 | |
| 	struct dsi_pll_14nm_postdiv *postdiv = to_pll_14nm_postdiv(hw);
 | |
| 	struct dsi_pll_14nm *pll_14nm = postdiv->pll;
 | |
| 	void __iomem *base = pll_14nm->phy->base;
 | |
| 	spinlock_t *lock = &pll_14nm->postdiv_lock;
 | |
| 	u8 shift = postdiv->shift;
 | |
| 	u8 width = postdiv->width;
 | |
| 	unsigned int value;
 | |
| 	unsigned long flags = 0;
 | |
| 	u32 val;
 | |
| 
 | |
| 	DBG("DSI%d PLL parent rate=%lu parent rate %lu", pll_14nm->phy->id, rate,
 | |
| 	    parent_rate);
 | |
| 
 | |
| 	value = divider_get_val(rate, parent_rate, NULL, postdiv->width,
 | |
| 				postdiv->flags);
 | |
| 
 | |
| 	spin_lock_irqsave(lock, flags);
 | |
| 
 | |
| 	val = readl(base + REG_DSI_14nm_PHY_CMN_CLK_CFG0);
 | |
| 	val &= ~(div_mask(width) << shift);
 | |
| 
 | |
| 	val |= value << shift;
 | |
| 	writel(val, base + REG_DSI_14nm_PHY_CMN_CLK_CFG0);
 | |
| 
 | |
| 	/* If we're master in bonded DSI mode, then the slave PLL's post-dividers
 | |
| 	 * follow the master's post dividers
 | |
| 	 */
 | |
| 	if (pll_14nm->phy->usecase == MSM_DSI_PHY_MASTER) {
 | |
| 		struct dsi_pll_14nm *pll_14nm_slave = pll_14nm->slave;
 | |
| 		void __iomem *slave_base = pll_14nm_slave->phy->base;
 | |
| 
 | |
| 		writel(val, slave_base + REG_DSI_14nm_PHY_CMN_CLK_CFG0);
 | |
| 	}
 | |
| 
 | |
| 	spin_unlock_irqrestore(lock, flags);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static const struct clk_ops clk_ops_dsi_pll_14nm_postdiv = {
 | |
| 	.recalc_rate = dsi_pll_14nm_postdiv_recalc_rate,
 | |
| 	.round_rate = dsi_pll_14nm_postdiv_round_rate,
 | |
| 	.set_rate = dsi_pll_14nm_postdiv_set_rate,
 | |
| };
 | |
| 
 | |
| /*
 | |
|  * PLL Callbacks
 | |
|  */
 | |
| 
 | |
| static void dsi_14nm_pll_save_state(struct msm_dsi_phy *phy)
 | |
| {
 | |
| 	struct dsi_pll_14nm *pll_14nm = to_pll_14nm(phy->vco_hw);
 | |
| 	struct pll_14nm_cached_state *cached_state = &pll_14nm->cached_state;
 | |
| 	void __iomem *cmn_base = pll_14nm->phy->base;
 | |
| 	u32 data;
 | |
| 
 | |
| 	data = readl(cmn_base + REG_DSI_14nm_PHY_CMN_CLK_CFG0);
 | |
| 
 | |
| 	cached_state->n1postdiv = data & 0xf;
 | |
| 	cached_state->n2postdiv = (data >> 4) & 0xf;
 | |
| 
 | |
| 	DBG("DSI%d PLL save state %x %x", pll_14nm->phy->id,
 | |
| 	    cached_state->n1postdiv, cached_state->n2postdiv);
 | |
| 
 | |
| 	cached_state->vco_rate = clk_hw_get_rate(phy->vco_hw);
 | |
| }
 | |
| 
 | |
| static int dsi_14nm_pll_restore_state(struct msm_dsi_phy *phy)
 | |
| {
 | |
| 	struct dsi_pll_14nm *pll_14nm = to_pll_14nm(phy->vco_hw);
 | |
| 	struct pll_14nm_cached_state *cached_state = &pll_14nm->cached_state;
 | |
| 	void __iomem *cmn_base = pll_14nm->phy->base;
 | |
| 	u32 data;
 | |
| 	int ret;
 | |
| 
 | |
| 	ret = dsi_pll_14nm_vco_set_rate(phy->vco_hw,
 | |
| 					cached_state->vco_rate, 0);
 | |
| 	if (ret) {
 | |
| 		DRM_DEV_ERROR(&pll_14nm->phy->pdev->dev,
 | |
| 			      "restore vco rate failed. ret=%d\n", ret);
 | |
| 		return ret;
 | |
| 	}
 | |
| 
 | |
| 	data = cached_state->n1postdiv | (cached_state->n2postdiv << 4);
 | |
| 
 | |
| 	DBG("DSI%d PLL restore state %x %x", pll_14nm->phy->id,
 | |
| 	    cached_state->n1postdiv, cached_state->n2postdiv);
 | |
| 
 | |
| 	writel(data, cmn_base + REG_DSI_14nm_PHY_CMN_CLK_CFG0);
 | |
| 
 | |
| 	/* also restore post-dividers for slave DSI PLL */
 | |
| 	if (phy->usecase == MSM_DSI_PHY_MASTER) {
 | |
| 		struct dsi_pll_14nm *pll_14nm_slave = pll_14nm->slave;
 | |
| 		void __iomem *slave_base = pll_14nm_slave->phy->base;
 | |
| 
 | |
| 		writel(data, slave_base + REG_DSI_14nm_PHY_CMN_CLK_CFG0);
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int dsi_14nm_set_usecase(struct msm_dsi_phy *phy)
 | |
| {
 | |
| 	struct dsi_pll_14nm *pll_14nm = to_pll_14nm(phy->vco_hw);
 | |
| 	void __iomem *base = phy->pll_base;
 | |
| 	u32 clkbuflr_en, bandgap = 0;
 | |
| 
 | |
| 	switch (phy->usecase) {
 | |
| 	case MSM_DSI_PHY_STANDALONE:
 | |
| 		clkbuflr_en = 0x1;
 | |
| 		break;
 | |
| 	case MSM_DSI_PHY_MASTER:
 | |
| 		clkbuflr_en = 0x3;
 | |
| 		pll_14nm->slave = pll_14nm_list[(pll_14nm->phy->id + 1) % DSI_MAX];
 | |
| 		break;
 | |
| 	case MSM_DSI_PHY_SLAVE:
 | |
| 		clkbuflr_en = 0x0;
 | |
| 		bandgap = 0x3;
 | |
| 		break;
 | |
| 	default:
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| 
 | |
| 	writel(clkbuflr_en, base + REG_DSI_14nm_PHY_PLL_CLKBUFLR_EN);
 | |
| 	if (bandgap)
 | |
| 		writel(bandgap, base + REG_DSI_14nm_PHY_PLL_PLL_BANDGAP);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static struct clk_hw *pll_14nm_postdiv_register(struct dsi_pll_14nm *pll_14nm,
 | |
| 						const char *name,
 | |
| 						const struct clk_hw *parent_hw,
 | |
| 						unsigned long flags,
 | |
| 						u8 shift)
 | |
| {
 | |
| 	struct dsi_pll_14nm_postdiv *pll_postdiv;
 | |
| 	struct device *dev = &pll_14nm->phy->pdev->dev;
 | |
| 	struct clk_init_data postdiv_init = {
 | |
| 		.parent_hws = (const struct clk_hw *[]) { parent_hw },
 | |
| 		.num_parents = 1,
 | |
| 		.name = name,
 | |
| 		.flags = flags,
 | |
| 		.ops = &clk_ops_dsi_pll_14nm_postdiv,
 | |
| 	};
 | |
| 	int ret;
 | |
| 
 | |
| 	pll_postdiv = devm_kzalloc(dev, sizeof(*pll_postdiv), GFP_KERNEL);
 | |
| 	if (!pll_postdiv)
 | |
| 		return ERR_PTR(-ENOMEM);
 | |
| 
 | |
| 	pll_postdiv->pll = pll_14nm;
 | |
| 	pll_postdiv->shift = shift;
 | |
| 	/* both N1 and N2 postdividers are 4 bits wide */
 | |
| 	pll_postdiv->width = 4;
 | |
| 	/* range of each divider is from 1 to 15 */
 | |
| 	pll_postdiv->flags = CLK_DIVIDER_ONE_BASED;
 | |
| 	pll_postdiv->hw.init = &postdiv_init;
 | |
| 
 | |
| 	ret = devm_clk_hw_register(dev, &pll_postdiv->hw);
 | |
| 	if (ret)
 | |
| 		return ERR_PTR(ret);
 | |
| 
 | |
| 	return &pll_postdiv->hw;
 | |
| }
 | |
| 
 | |
| static int pll_14nm_register(struct dsi_pll_14nm *pll_14nm, struct clk_hw **provided_clocks)
 | |
| {
 | |
| 	char clk_name[32];
 | |
| 	struct clk_init_data vco_init = {
 | |
| 		.parent_data = &(const struct clk_parent_data) {
 | |
| 			.fw_name = "ref",
 | |
| 		},
 | |
| 		.num_parents = 1,
 | |
| 		.name = clk_name,
 | |
| 		.flags = CLK_IGNORE_UNUSED,
 | |
| 		.ops = &clk_ops_dsi_pll_14nm_vco,
 | |
| 	};
 | |
| 	struct device *dev = &pll_14nm->phy->pdev->dev;
 | |
| 	struct clk_hw *hw, *n1_postdiv, *n1_postdivby2;
 | |
| 	int ret;
 | |
| 
 | |
| 	DBG("DSI%d", pll_14nm->phy->id);
 | |
| 
 | |
| 	snprintf(clk_name, sizeof(clk_name), "dsi%dvco_clk", pll_14nm->phy->id);
 | |
| 	pll_14nm->clk_hw.init = &vco_init;
 | |
| 
 | |
| 	ret = devm_clk_hw_register(dev, &pll_14nm->clk_hw);
 | |
| 	if (ret)
 | |
| 		return ret;
 | |
| 
 | |
| 	snprintf(clk_name, sizeof(clk_name), "dsi%dn1_postdiv_clk", pll_14nm->phy->id);
 | |
| 
 | |
| 	/* N1 postdiv, bits 0-3 in REG_DSI_14nm_PHY_CMN_CLK_CFG0 */
 | |
| 	n1_postdiv = pll_14nm_postdiv_register(pll_14nm, clk_name,
 | |
| 			&pll_14nm->clk_hw, CLK_SET_RATE_PARENT, 0);
 | |
| 	if (IS_ERR(n1_postdiv))
 | |
| 		return PTR_ERR(n1_postdiv);
 | |
| 
 | |
| 	snprintf(clk_name, sizeof(clk_name), "dsi%dpllbyte", pll_14nm->phy->id);
 | |
| 
 | |
| 	/* DSI Byte clock = VCO_CLK / N1 / 8 */
 | |
| 	hw = devm_clk_hw_register_fixed_factor_parent_hw(dev, clk_name,
 | |
| 			n1_postdiv, CLK_SET_RATE_PARENT, 1, 8);
 | |
| 	if (IS_ERR(hw))
 | |
| 		return PTR_ERR(hw);
 | |
| 
 | |
| 	provided_clocks[DSI_BYTE_PLL_CLK] = hw;
 | |
| 
 | |
| 	snprintf(clk_name, sizeof(clk_name), "dsi%dn1_postdivby2_clk", pll_14nm->phy->id);
 | |
| 
 | |
| 	/*
 | |
| 	 * Skip the mux for now, force DSICLK_SEL to 1, Add a /2 divider
 | |
| 	 * on the way. Don't let it set parent.
 | |
| 	 */
 | |
| 	n1_postdivby2 = devm_clk_hw_register_fixed_factor_parent_hw(dev,
 | |
| 			clk_name, n1_postdiv, 0, 1, 2);
 | |
| 	if (IS_ERR(n1_postdivby2))
 | |
| 		return PTR_ERR(n1_postdivby2);
 | |
| 
 | |
| 	snprintf(clk_name, sizeof(clk_name), "dsi%dpll", pll_14nm->phy->id);
 | |
| 
 | |
| 	/* DSI pixel clock = VCO_CLK / N1 / 2 / N2
 | |
| 	 * This is the output of N2 post-divider, bits 4-7 in
 | |
| 	 * REG_DSI_14nm_PHY_CMN_CLK_CFG0. Don't let it set parent.
 | |
| 	 */
 | |
| 	hw = pll_14nm_postdiv_register(pll_14nm, clk_name, n1_postdivby2,
 | |
| 			0, 4);
 | |
| 	if (IS_ERR(hw))
 | |
| 		return PTR_ERR(hw);
 | |
| 
 | |
| 	provided_clocks[DSI_PIXEL_PLL_CLK] = hw;
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int dsi_pll_14nm_init(struct msm_dsi_phy *phy)
 | |
| {
 | |
| 	struct platform_device *pdev = phy->pdev;
 | |
| 	struct dsi_pll_14nm *pll_14nm;
 | |
| 	int ret;
 | |
| 
 | |
| 	if (!pdev)
 | |
| 		return -ENODEV;
 | |
| 
 | |
| 	pll_14nm = devm_kzalloc(&pdev->dev, sizeof(*pll_14nm), GFP_KERNEL);
 | |
| 	if (!pll_14nm)
 | |
| 		return -ENOMEM;
 | |
| 
 | |
| 	DBG("PLL%d", phy->id);
 | |
| 
 | |
| 	pll_14nm_list[phy->id] = pll_14nm;
 | |
| 
 | |
| 	spin_lock_init(&pll_14nm->postdiv_lock);
 | |
| 
 | |
| 	pll_14nm->phy = phy;
 | |
| 
 | |
| 	ret = pll_14nm_register(pll_14nm, phy->provided_clocks->hws);
 | |
| 	if (ret) {
 | |
| 		DRM_DEV_ERROR(&pdev->dev, "failed to register PLL: %d\n", ret);
 | |
| 		return ret;
 | |
| 	}
 | |
| 
 | |
| 	phy->vco_hw = &pll_14nm->clk_hw;
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static void dsi_14nm_dphy_set_timing(struct msm_dsi_phy *phy,
 | |
| 				     struct msm_dsi_dphy_timing *timing,
 | |
| 				     int lane_idx)
 | |
| {
 | |
| 	void __iomem *base = phy->lane_base;
 | |
| 	bool clk_ln = (lane_idx == PHY_14NM_CKLN_IDX);
 | |
| 	u32 zero = clk_ln ? timing->clk_zero : timing->hs_zero;
 | |
| 	u32 prepare = clk_ln ? timing->clk_prepare : timing->hs_prepare;
 | |
| 	u32 trail = clk_ln ? timing->clk_trail : timing->hs_trail;
 | |
| 	u32 rqst = clk_ln ? timing->hs_rqst_ckln : timing->hs_rqst;
 | |
| 	u32 prep_dly = clk_ln ? timing->hs_prep_dly_ckln : timing->hs_prep_dly;
 | |
| 	u32 halfbyte_en = clk_ln ? timing->hs_halfbyte_en_ckln :
 | |
| 				   timing->hs_halfbyte_en;
 | |
| 
 | |
| 	writel(DSI_14nm_PHY_LN_TIMING_CTRL_4_HS_EXIT(timing->hs_exit),
 | |
| 	       base + REG_DSI_14nm_PHY_LN_TIMING_CTRL_4(lane_idx));
 | |
| 	writel(DSI_14nm_PHY_LN_TIMING_CTRL_5_HS_ZERO(zero),
 | |
| 	       base + REG_DSI_14nm_PHY_LN_TIMING_CTRL_5(lane_idx));
 | |
| 	writel(DSI_14nm_PHY_LN_TIMING_CTRL_6_HS_PREPARE(prepare),
 | |
| 	       base + REG_DSI_14nm_PHY_LN_TIMING_CTRL_6(lane_idx));
 | |
| 	writel(DSI_14nm_PHY_LN_TIMING_CTRL_7_HS_TRAIL(trail),
 | |
| 	       base + REG_DSI_14nm_PHY_LN_TIMING_CTRL_7(lane_idx));
 | |
| 	writel(DSI_14nm_PHY_LN_TIMING_CTRL_8_HS_RQST(rqst),
 | |
| 	       base + REG_DSI_14nm_PHY_LN_TIMING_CTRL_8(lane_idx));
 | |
| 	writel(DSI_14nm_PHY_LN_CFG0_PREPARE_DLY(prep_dly),
 | |
| 	       base + REG_DSI_14nm_PHY_LN_CFG0(lane_idx));
 | |
| 	writel(halfbyte_en ? DSI_14nm_PHY_LN_CFG1_HALFBYTECLK_EN : 0,
 | |
| 	       base + REG_DSI_14nm_PHY_LN_CFG1(lane_idx));
 | |
| 	writel(DSI_14nm_PHY_LN_TIMING_CTRL_9_TA_GO(timing->ta_go) |
 | |
| 	       DSI_14nm_PHY_LN_TIMING_CTRL_9_TA_SURE(timing->ta_sure),
 | |
| 	       base + REG_DSI_14nm_PHY_LN_TIMING_CTRL_9(lane_idx));
 | |
| 	writel(DSI_14nm_PHY_LN_TIMING_CTRL_10_TA_GET(timing->ta_get),
 | |
| 	       base + REG_DSI_14nm_PHY_LN_TIMING_CTRL_10(lane_idx));
 | |
| 	writel(DSI_14nm_PHY_LN_TIMING_CTRL_11_TRIG3_CMD(0xa0),
 | |
| 	       base + REG_DSI_14nm_PHY_LN_TIMING_CTRL_11(lane_idx));
 | |
| }
 | |
| 
 | |
| static int dsi_14nm_phy_enable(struct msm_dsi_phy *phy,
 | |
| 			       struct msm_dsi_phy_clk_request *clk_req)
 | |
| {
 | |
| 	struct msm_dsi_dphy_timing *timing = &phy->timing;
 | |
| 	u32 data;
 | |
| 	int i;
 | |
| 	int ret;
 | |
| 	void __iomem *base = phy->base;
 | |
| 	void __iomem *lane_base = phy->lane_base;
 | |
| 	u32 glbl_test_ctrl;
 | |
| 
 | |
| 	if (msm_dsi_dphy_timing_calc_v2(timing, clk_req)) {
 | |
| 		DRM_DEV_ERROR(&phy->pdev->dev,
 | |
| 			      "%s: D-PHY timing calculation failed\n",
 | |
| 			      __func__);
 | |
| 		return -EINVAL;
 | |
| 	}
 | |
| 
 | |
| 	data = 0x1c;
 | |
| 	if (phy->usecase != MSM_DSI_PHY_STANDALONE)
 | |
| 		data |= DSI_14nm_PHY_CMN_LDO_CNTRL_VREG_CTRL(32);
 | |
| 	writel(data, base + REG_DSI_14nm_PHY_CMN_LDO_CNTRL);
 | |
| 
 | |
| 	writel(0x1, base + REG_DSI_14nm_PHY_CMN_GLBL_TEST_CTRL);
 | |
| 
 | |
| 	/* 4 data lanes + 1 clk lane configuration */
 | |
| 	for (i = 0; i < 5; i++) {
 | |
| 		writel(0x1d, lane_base + REG_DSI_14nm_PHY_LN_VREG_CNTRL(i));
 | |
| 
 | |
| 		writel(0xff, lane_base + REG_DSI_14nm_PHY_LN_STRENGTH_CTRL_0(i));
 | |
| 		writel(i == PHY_14NM_CKLN_IDX ? 0x00 : 0x06,
 | |
| 		       lane_base + REG_DSI_14nm_PHY_LN_STRENGTH_CTRL_1(i));
 | |
| 
 | |
| 		writel(i == PHY_14NM_CKLN_IDX ? 0x8f : 0x0f,
 | |
| 		       lane_base + REG_DSI_14nm_PHY_LN_CFG3(i));
 | |
| 		writel(0x10, lane_base + REG_DSI_14nm_PHY_LN_CFG2(i));
 | |
| 		writel(0, lane_base + REG_DSI_14nm_PHY_LN_TEST_DATAPATH(i));
 | |
| 		writel(0x88, lane_base + REG_DSI_14nm_PHY_LN_TEST_STR(i));
 | |
| 
 | |
| 		dsi_14nm_dphy_set_timing(phy, timing, i);
 | |
| 	}
 | |
| 
 | |
| 	/* Make sure PLL is not start */
 | |
| 	writel(0x00, base + REG_DSI_14nm_PHY_CMN_PLL_CNTRL);
 | |
| 
 | |
| 	wmb(); /* make sure everything is written before reset and enable */
 | |
| 
 | |
| 	/* reset digital block */
 | |
| 	writel(0x80, base + REG_DSI_14nm_PHY_CMN_CTRL_1);
 | |
| 	wmb(); /* ensure reset is asserted */
 | |
| 	udelay(100);
 | |
| 	writel(0x00, base + REG_DSI_14nm_PHY_CMN_CTRL_1);
 | |
| 
 | |
| 	glbl_test_ctrl = readl(base + REG_DSI_14nm_PHY_CMN_GLBL_TEST_CTRL);
 | |
| 	if (phy->id == DSI_1 && phy->usecase == MSM_DSI_PHY_SLAVE)
 | |
| 		glbl_test_ctrl |= DSI_14nm_PHY_CMN_GLBL_TEST_CTRL_BITCLK_HS_SEL;
 | |
| 	else
 | |
| 		glbl_test_ctrl &= ~DSI_14nm_PHY_CMN_GLBL_TEST_CTRL_BITCLK_HS_SEL;
 | |
| 	writel(glbl_test_ctrl, base + REG_DSI_14nm_PHY_CMN_GLBL_TEST_CTRL);
 | |
| 	ret = dsi_14nm_set_usecase(phy);
 | |
| 	if (ret) {
 | |
| 		DRM_DEV_ERROR(&phy->pdev->dev, "%s: set pll usecase failed, %d\n",
 | |
| 			      __func__, ret);
 | |
| 		return ret;
 | |
| 	}
 | |
| 
 | |
| 	/* Remove power down from PLL and all lanes */
 | |
| 	writel(0xff, base + REG_DSI_14nm_PHY_CMN_CTRL_0);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static void dsi_14nm_phy_disable(struct msm_dsi_phy *phy)
 | |
| {
 | |
| 	writel(0, phy->base + REG_DSI_14nm_PHY_CMN_GLBL_TEST_CTRL);
 | |
| 	writel(0, phy->base + REG_DSI_14nm_PHY_CMN_CTRL_0);
 | |
| 
 | |
| 	/* ensure that the phy is completely disabled */
 | |
| 	wmb();
 | |
| }
 | |
| 
 | |
| static const struct regulator_bulk_data dsi_phy_14nm_17mA_regulators[] = {
 | |
| 	{ .supply = "vcca", .init_load_uA = 17000 },
 | |
| };
 | |
| 
 | |
| static const struct regulator_bulk_data dsi_phy_14nm_73p4mA_regulators[] = {
 | |
| 	{ .supply = "vcca", .init_load_uA = 73400 },
 | |
| };
 | |
| 
 | |
| const struct msm_dsi_phy_cfg dsi_phy_14nm_cfgs = {
 | |
| 	.has_phy_lane = true,
 | |
| 	.regulator_data = dsi_phy_14nm_17mA_regulators,
 | |
| 	.num_regulators = ARRAY_SIZE(dsi_phy_14nm_17mA_regulators),
 | |
| 	.ops = {
 | |
| 		.enable = dsi_14nm_phy_enable,
 | |
| 		.disable = dsi_14nm_phy_disable,
 | |
| 		.pll_init = dsi_pll_14nm_init,
 | |
| 		.save_pll_state = dsi_14nm_pll_save_state,
 | |
| 		.restore_pll_state = dsi_14nm_pll_restore_state,
 | |
| 	},
 | |
| 	.min_pll_rate = VCO_MIN_RATE,
 | |
| 	.max_pll_rate = VCO_MAX_RATE,
 | |
| 	.io_start = { 0x994400, 0x996400 },
 | |
| 	.num_dsi_phy = 2,
 | |
| };
 | |
| 
 | |
| const struct msm_dsi_phy_cfg dsi_phy_14nm_660_cfgs = {
 | |
| 	.has_phy_lane = true,
 | |
| 	.regulator_data = dsi_phy_14nm_73p4mA_regulators,
 | |
| 	.num_regulators = ARRAY_SIZE(dsi_phy_14nm_73p4mA_regulators),
 | |
| 	.ops = {
 | |
| 		.enable = dsi_14nm_phy_enable,
 | |
| 		.disable = dsi_14nm_phy_disable,
 | |
| 		.pll_init = dsi_pll_14nm_init,
 | |
| 		.save_pll_state = dsi_14nm_pll_save_state,
 | |
| 		.restore_pll_state = dsi_14nm_pll_restore_state,
 | |
| 	},
 | |
| 	.min_pll_rate = VCO_MIN_RATE,
 | |
| 	.max_pll_rate = VCO_MAX_RATE,
 | |
| 	.io_start = { 0xc994400, 0xc996400 },
 | |
| 	.num_dsi_phy = 2,
 | |
| };
 | |
| 
 | |
| const struct msm_dsi_phy_cfg dsi_phy_14nm_8953_cfgs = {
 | |
| 	.has_phy_lane = true,
 | |
| 	.regulator_data = dsi_phy_14nm_17mA_regulators,
 | |
| 	.num_regulators = ARRAY_SIZE(dsi_phy_14nm_17mA_regulators),
 | |
| 	.ops = {
 | |
| 		.enable = dsi_14nm_phy_enable,
 | |
| 		.disable = dsi_14nm_phy_disable,
 | |
| 		.pll_init = dsi_pll_14nm_init,
 | |
| 		.save_pll_state = dsi_14nm_pll_save_state,
 | |
| 		.restore_pll_state = dsi_14nm_pll_restore_state,
 | |
| 	},
 | |
| 	.min_pll_rate = VCO_MIN_RATE,
 | |
| 	.max_pll_rate = VCO_MAX_RATE,
 | |
| 	.io_start = { 0x1a94400, 0x1a96400 },
 | |
| 	.num_dsi_phy = 2,
 | |
| };
 | |
| 
 | |
| const struct msm_dsi_phy_cfg dsi_phy_14nm_2290_cfgs = {
 | |
| 	.has_phy_lane = true,
 | |
| 	.ops = {
 | |
| 		.enable = dsi_14nm_phy_enable,
 | |
| 		.disable = dsi_14nm_phy_disable,
 | |
| 		.pll_init = dsi_pll_14nm_init,
 | |
| 		.save_pll_state = dsi_14nm_pll_save_state,
 | |
| 		.restore_pll_state = dsi_14nm_pll_restore_state,
 | |
| 	},
 | |
| 	.min_pll_rate = VCO_MIN_RATE,
 | |
| 	.max_pll_rate = VCO_MAX_RATE,
 | |
| 	.io_start = { 0x5e94400 },
 | |
| 	.num_dsi_phy = 1,
 | |
| };
 |