295 lines
		
	
	
		
			7.4 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			295 lines
		
	
	
		
			7.4 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
| // SPDX-License-Identifier: GPL-2.0
 | |
| // Copyright (C) 2013,2018,2020-2021 Intel Corporation
 | |
| 
 | |
| #include <linux/bitops.h>
 | |
| #include <linux/dmaengine.h>
 | |
| #include <linux/errno.h>
 | |
| #include <linux/io.h>
 | |
| #include <linux/pci.h>
 | |
| #include <linux/slab.h>
 | |
| #include <linux/types.h>
 | |
| 
 | |
| #include "internal.h"
 | |
| 
 | |
| #define DMA_CTL_CH(x)			(0x1000 + (x) * 4)
 | |
| #define DMA_SRC_ADDR_FILLIN(x)		(0x1100 + (x) * 4)
 | |
| #define DMA_DST_ADDR_FILLIN(x)		(0x1200 + (x) * 4)
 | |
| #define DMA_XBAR_SEL(x)			(0x1300 + (x) * 4)
 | |
| #define DMA_REGACCESS_CHID_CFG		(0x1400)
 | |
| 
 | |
| #define CTL_CH_TRANSFER_MODE_MASK	GENMASK(1, 0)
 | |
| #define CTL_CH_TRANSFER_MODE_S2S	0
 | |
| #define CTL_CH_TRANSFER_MODE_S2D	1
 | |
| #define CTL_CH_TRANSFER_MODE_D2S	2
 | |
| #define CTL_CH_TRANSFER_MODE_D2D	3
 | |
| #define CTL_CH_RD_RS_MASK		GENMASK(4, 3)
 | |
| #define CTL_CH_WR_RS_MASK		GENMASK(6, 5)
 | |
| #define CTL_CH_RD_NON_SNOOP_BIT		BIT(8)
 | |
| #define CTL_CH_WR_NON_SNOOP_BIT		BIT(9)
 | |
| 
 | |
| #define XBAR_SEL_DEVID_MASK		GENMASK(15, 0)
 | |
| #define XBAR_SEL_RX_TX_BIT		BIT(16)
 | |
| #define XBAR_SEL_RX_TX_SHIFT		16
 | |
| 
 | |
| #define REGACCESS_CHID_MASK		GENMASK(2, 0)
 | |
| 
 | |
| static unsigned int idma32_get_slave_devfn(struct dw_dma_chan *dwc)
 | |
| {
 | |
| 	struct device *slave = dwc->chan.slave;
 | |
| 
 | |
| 	if (!slave || !dev_is_pci(slave))
 | |
| 		return 0;
 | |
| 
 | |
| 	return to_pci_dev(slave)->devfn;
 | |
| }
 | |
| 
 | |
| static void idma32_initialize_chan_xbar(struct dw_dma_chan *dwc)
 | |
| {
 | |
| 	struct dw_dma *dw = to_dw_dma(dwc->chan.device);
 | |
| 	void __iomem *misc = __dw_regs(dw);
 | |
| 	u32 cfghi = 0, cfglo = 0;
 | |
| 	u8 dst_id, src_id;
 | |
| 	u32 value;
 | |
| 
 | |
| 	/* DMA Channel ID Configuration register must be programmed first */
 | |
| 	value = readl(misc + DMA_REGACCESS_CHID_CFG);
 | |
| 
 | |
| 	value &= ~REGACCESS_CHID_MASK;
 | |
| 	value |= dwc->chan.chan_id;
 | |
| 
 | |
| 	writel(value, misc + DMA_REGACCESS_CHID_CFG);
 | |
| 
 | |
| 	/* Configure channel attributes */
 | |
| 	value = readl(misc + DMA_CTL_CH(dwc->chan.chan_id));
 | |
| 
 | |
| 	value &= ~(CTL_CH_RD_NON_SNOOP_BIT | CTL_CH_WR_NON_SNOOP_BIT);
 | |
| 	value &= ~(CTL_CH_RD_RS_MASK | CTL_CH_WR_RS_MASK);
 | |
| 	value &= ~CTL_CH_TRANSFER_MODE_MASK;
 | |
| 
 | |
| 	switch (dwc->direction) {
 | |
| 	case DMA_MEM_TO_DEV:
 | |
| 		value |= CTL_CH_TRANSFER_MODE_D2S;
 | |
| 		value |= CTL_CH_WR_NON_SNOOP_BIT;
 | |
| 		break;
 | |
| 	case DMA_DEV_TO_MEM:
 | |
| 		value |= CTL_CH_TRANSFER_MODE_S2D;
 | |
| 		value |= CTL_CH_RD_NON_SNOOP_BIT;
 | |
| 		break;
 | |
| 	default:
 | |
| 		/*
 | |
| 		 * Memory-to-Memory and Device-to-Device are ignored for now.
 | |
| 		 *
 | |
| 		 * For Memory-to-Memory transfers we would need to set mode
 | |
| 		 * and disable snooping on both sides.
 | |
| 		 */
 | |
| 		return;
 | |
| 	}
 | |
| 
 | |
| 	writel(value, misc + DMA_CTL_CH(dwc->chan.chan_id));
 | |
| 
 | |
| 	/* Configure crossbar selection */
 | |
| 	value = readl(misc + DMA_XBAR_SEL(dwc->chan.chan_id));
 | |
| 
 | |
| 	/* DEVFN selection */
 | |
| 	value &= ~XBAR_SEL_DEVID_MASK;
 | |
| 	value |= idma32_get_slave_devfn(dwc);
 | |
| 
 | |
| 	switch (dwc->direction) {
 | |
| 	case DMA_MEM_TO_DEV:
 | |
| 		value |= XBAR_SEL_RX_TX_BIT;
 | |
| 		break;
 | |
| 	case DMA_DEV_TO_MEM:
 | |
| 		value &= ~XBAR_SEL_RX_TX_BIT;
 | |
| 		break;
 | |
| 	default:
 | |
| 		/* Memory-to-Memory and Device-to-Device are ignored for now */
 | |
| 		return;
 | |
| 	}
 | |
| 
 | |
| 	writel(value, misc + DMA_XBAR_SEL(dwc->chan.chan_id));
 | |
| 
 | |
| 	/* Configure DMA channel low and high registers */
 | |
| 	switch (dwc->direction) {
 | |
| 	case DMA_MEM_TO_DEV:
 | |
| 		dst_id = dwc->chan.chan_id;
 | |
| 		src_id = dwc->dws.src_id;
 | |
| 		break;
 | |
| 	case DMA_DEV_TO_MEM:
 | |
| 		dst_id = dwc->dws.dst_id;
 | |
| 		src_id = dwc->chan.chan_id;
 | |
| 		break;
 | |
| 	default:
 | |
| 		/* Memory-to-Memory and Device-to-Device are ignored for now */
 | |
| 		return;
 | |
| 	}
 | |
| 
 | |
| 	/* Set default burst alignment */
 | |
| 	cfglo |= IDMA32C_CFGL_DST_BURST_ALIGN | IDMA32C_CFGL_SRC_BURST_ALIGN;
 | |
| 
 | |
| 	/* Low 4 bits of the request lines */
 | |
| 	cfghi |= IDMA32C_CFGH_DST_PER(dst_id & 0xf);
 | |
| 	cfghi |= IDMA32C_CFGH_SRC_PER(src_id & 0xf);
 | |
| 
 | |
| 	/* Request line extension (2 bits) */
 | |
| 	cfghi |= IDMA32C_CFGH_DST_PER_EXT(dst_id >> 4 & 0x3);
 | |
| 	cfghi |= IDMA32C_CFGH_SRC_PER_EXT(src_id >> 4 & 0x3);
 | |
| 
 | |
| 	channel_writel(dwc, CFG_LO, cfglo);
 | |
| 	channel_writel(dwc, CFG_HI, cfghi);
 | |
| }
 | |
| 
 | |
| static void idma32_initialize_chan_generic(struct dw_dma_chan *dwc)
 | |
| {
 | |
| 	u32 cfghi = 0;
 | |
| 	u32 cfglo = 0;
 | |
| 
 | |
| 	/* Set default burst alignment */
 | |
| 	cfglo |= IDMA32C_CFGL_DST_BURST_ALIGN | IDMA32C_CFGL_SRC_BURST_ALIGN;
 | |
| 
 | |
| 	/* Low 4 bits of the request lines */
 | |
| 	cfghi |= IDMA32C_CFGH_DST_PER(dwc->dws.dst_id & 0xf);
 | |
| 	cfghi |= IDMA32C_CFGH_SRC_PER(dwc->dws.src_id & 0xf);
 | |
| 
 | |
| 	/* Request line extension (2 bits) */
 | |
| 	cfghi |= IDMA32C_CFGH_DST_PER_EXT(dwc->dws.dst_id >> 4 & 0x3);
 | |
| 	cfghi |= IDMA32C_CFGH_SRC_PER_EXT(dwc->dws.src_id >> 4 & 0x3);
 | |
| 
 | |
| 	channel_writel(dwc, CFG_LO, cfglo);
 | |
| 	channel_writel(dwc, CFG_HI, cfghi);
 | |
| }
 | |
| 
 | |
| static void idma32_suspend_chan(struct dw_dma_chan *dwc, bool drain)
 | |
| {
 | |
| 	u32 cfglo = channel_readl(dwc, CFG_LO);
 | |
| 
 | |
| 	if (drain)
 | |
| 		cfglo |= IDMA32C_CFGL_CH_DRAIN;
 | |
| 
 | |
| 	channel_writel(dwc, CFG_LO, cfglo | DWC_CFGL_CH_SUSP);
 | |
| }
 | |
| 
 | |
| static void idma32_resume_chan(struct dw_dma_chan *dwc, bool drain)
 | |
| {
 | |
| 	u32 cfglo = channel_readl(dwc, CFG_LO);
 | |
| 
 | |
| 	if (drain)
 | |
| 		cfglo &= ~IDMA32C_CFGL_CH_DRAIN;
 | |
| 
 | |
| 	channel_writel(dwc, CFG_LO, cfglo & ~DWC_CFGL_CH_SUSP);
 | |
| }
 | |
| 
 | |
| static u32 idma32_bytes2block(struct dw_dma_chan *dwc,
 | |
| 			      size_t bytes, unsigned int width, size_t *len)
 | |
| {
 | |
| 	u32 block;
 | |
| 
 | |
| 	if (bytes > dwc->block_size) {
 | |
| 		block = dwc->block_size;
 | |
| 		*len = dwc->block_size;
 | |
| 	} else {
 | |
| 		block = bytes;
 | |
| 		*len = bytes;
 | |
| 	}
 | |
| 
 | |
| 	return block;
 | |
| }
 | |
| 
 | |
| static size_t idma32_block2bytes(struct dw_dma_chan *dwc, u32 block, u32 width)
 | |
| {
 | |
| 	return IDMA32C_CTLH_BLOCK_TS(block);
 | |
| }
 | |
| 
 | |
| static inline u8 idma32_encode_maxburst(u32 maxburst)
 | |
| {
 | |
| 	return maxburst > 1 ? fls(maxburst) - 1 : 0;
 | |
| }
 | |
| 
 | |
| static u32 idma32_prepare_ctllo(struct dw_dma_chan *dwc)
 | |
| {
 | |
| 	struct dma_slave_config	*sconfig = &dwc->dma_sconfig;
 | |
| 	u8 smsize = 0, dmsize = 0;
 | |
| 
 | |
| 	if (dwc->direction == DMA_MEM_TO_DEV)
 | |
| 		dmsize = idma32_encode_maxburst(sconfig->dst_maxburst);
 | |
| 	else if (dwc->direction == DMA_DEV_TO_MEM)
 | |
| 		smsize = idma32_encode_maxburst(sconfig->src_maxburst);
 | |
| 
 | |
| 	return DWC_CTLL_LLP_D_EN | DWC_CTLL_LLP_S_EN |
 | |
| 	       DWC_CTLL_DST_MSIZE(dmsize) | DWC_CTLL_SRC_MSIZE(smsize);
 | |
| }
 | |
| 
 | |
| static void idma32_set_device_name(struct dw_dma *dw, int id)
 | |
| {
 | |
| 	snprintf(dw->name, sizeof(dw->name), "idma32:dmac%d", id);
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * Program FIFO size of channels.
 | |
|  *
 | |
|  * By default full FIFO (512 bytes) is assigned to channel 0. Here we
 | |
|  * slice FIFO on equal parts between channels.
 | |
|  */
 | |
| static void idma32_fifo_partition(struct dw_dma *dw)
 | |
| {
 | |
| 	u64 value = IDMA32C_FP_PSIZE_CH0(64) | IDMA32C_FP_PSIZE_CH1(64) |
 | |
| 		    IDMA32C_FP_UPDATE;
 | |
| 	u64 fifo_partition = 0;
 | |
| 
 | |
| 	/* Fill FIFO_PARTITION low bits (Channels 0..1, 4..5) */
 | |
| 	fifo_partition |= value << 0;
 | |
| 
 | |
| 	/* Fill FIFO_PARTITION high bits (Channels 2..3, 6..7) */
 | |
| 	fifo_partition |= value << 32;
 | |
| 
 | |
| 	/* Program FIFO Partition registers - 64 bytes per channel */
 | |
| 	idma32_writeq(dw, FIFO_PARTITION1, fifo_partition);
 | |
| 	idma32_writeq(dw, FIFO_PARTITION0, fifo_partition);
 | |
| }
 | |
| 
 | |
| static void idma32_disable(struct dw_dma *dw)
 | |
| {
 | |
| 	do_dw_dma_off(dw);
 | |
| 	idma32_fifo_partition(dw);
 | |
| }
 | |
| 
 | |
| static void idma32_enable(struct dw_dma *dw)
 | |
| {
 | |
| 	idma32_fifo_partition(dw);
 | |
| 	do_dw_dma_on(dw);
 | |
| }
 | |
| 
 | |
| int idma32_dma_probe(struct dw_dma_chip *chip)
 | |
| {
 | |
| 	struct dw_dma *dw;
 | |
| 
 | |
| 	dw = devm_kzalloc(chip->dev, sizeof(*dw), GFP_KERNEL);
 | |
| 	if (!dw)
 | |
| 		return -ENOMEM;
 | |
| 
 | |
| 	/* Channel operations */
 | |
| 	if (chip->pdata->quirks & DW_DMA_QUIRK_XBAR_PRESENT)
 | |
| 		dw->initialize_chan = idma32_initialize_chan_xbar;
 | |
| 	else
 | |
| 		dw->initialize_chan = idma32_initialize_chan_generic;
 | |
| 	dw->suspend_chan = idma32_suspend_chan;
 | |
| 	dw->resume_chan = idma32_resume_chan;
 | |
| 	dw->prepare_ctllo = idma32_prepare_ctllo;
 | |
| 	dw->bytes2block = idma32_bytes2block;
 | |
| 	dw->block2bytes = idma32_block2bytes;
 | |
| 
 | |
| 	/* Device operations */
 | |
| 	dw->set_device_name = idma32_set_device_name;
 | |
| 	dw->disable = idma32_disable;
 | |
| 	dw->enable = idma32_enable;
 | |
| 
 | |
| 	chip->dw = dw;
 | |
| 	return do_dma_probe(chip);
 | |
| }
 | |
| EXPORT_SYMBOL_GPL(idma32_dma_probe);
 | |
| 
 | |
| int idma32_dma_remove(struct dw_dma_chip *chip)
 | |
| {
 | |
| 	return do_dma_remove(chip);
 | |
| }
 | |
| EXPORT_SYMBOL_GPL(idma32_dma_remove);
 |